37886d5e2 Disconnect outbound peers relaying invalid headers (Suhas Daftuar)
4637f1852 moveonly: factor out headers processing into separate function (Suhas Daftuar)
Pull request description:
Alternate to #11446.
Disconnect outbound (non-manual) peers that serve us block headers that are already known to be invalid, but exempt compact block announcements from such disconnects.
We restrict disconnection to outbound peers that are using up an outbound connection slot, because we rely on those peers to give us connectivity to the honest network (our inbound peers are not chosen by us and hence could all be from an attacker/sybil). Maintaining connectivity to peers that serve us invalid headers is sometimes desirable, eg after a soft-fork, to protect unupgraded software from being partitioned off the honest network, so we prefer to only disconnect when necessary.
Compact block announcements are exempted from this logic to comply with BIP 152, which explicitly permits nodes to relay compact blocks before fully validating them.
Tree-SHA512: 3ea88e4ccc1184f292a85b17f800d401d2c3806fefc7ad5429d05d6872c53acfa5751e3df83ce6b9c0060ab289511ed70ae1323d140ccc5b12e3c8da6de49936
e065249 Add unit test for outbound peer eviction (Suhas Daftuar)
5a6d00c Permit disconnection of outbound peers on bad/slow chains (Suhas Daftuar)
c60fd71 Disconnecting from bad outbound peers in IBD (Suhas Daftuar)
Pull request description:
The first commit will disconnect an outbound peer that serves us a headers chain with insufficient work while we're in IBD.
The second commit introduces a way to disconnect outbound peers whose chains fall out of sync with ours:
For a given outbound peer, we check whether their best known block (which is known from the blocks they announce to us) has at least as much work as our tip. If it doesn't, we set a 20 minute timeout, and if we still haven't heard about a block with as much work as our tip had when we set the timeout, then we send a single getheaders message, and wait 2 more minutes. If after two minutes their best known block has insufficient work, we disconnect that peer.
We protect 4 of our outbound peers (who provide some "good" headers chains, ie a chain with at least as much work as our tip at some point) from being subject to this logic, to prevent excessive network topology changes as a result of this algorithm, while still ensuring that we have a reasonable number of nodes not known to be on bogus chains.
We also don't require our peers to be on the same chain as us, to prevent accidental partitioning of the network in the event of a chain split. Note that if our peers are ever on a more work chain than our tip, then we will download and validate it, and then either reorg to it, or learn of a consensus incompatibility with that peer and disconnect. This PR is designed to protect against peers that are on a less work chain which we may never try to download and validate.
Tree-SHA512: 2e0169a1dd8a7fb95980573ac4a201924bffdd724c19afcab5efcef076fdbe1f2cec7dc5f5d7e0a6327216f56d3828884f73642e00c8534b56ec2bb4c854a656
77939f27f Fix uninitialized g_connman crash in Shutdown() (MeshCollider)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/11312
As @dooglus pointed out, `g_connman` is uninitialized when an invalid wallet path is passed on start up, but then dereferenced in `Shutdown()`, so this tiny PR just fixes that.
Tree-SHA512: 2557133422a6e393017081450a7e6c100fe7d9ce36e628e5f5f479bc07617a7bd9a9ad4d44c0d8abadf2e3eb62a11ce9743abc27b4ae8c20f709e72df4f25a7f
2525b972a net: stop both net/net_processing before destroying them (Cory Fields)
80e2e9d0c net: drop unused connman param (Cory Fields)
8ad663c1f net: use an interface class rather than signals for message processing (Cory Fields)
28f11e940 net: pass CConnman via pointer rather than reference (Cory Fields)
Pull request description:
See individual commits.
Benefits:
- Allows us to begin moving stuff out of CNode and into CNodeState (after #10652 and follow-ups)
- Drops boost dependency and overhead
- Drops global signal registration
- Friendlier backtraces
Tree-SHA512: af2038c959dbec25f0c90c74c88dc6a630e6b9e984adf52aceadd6954aa463b6aadfccf979c2459a9f3354326b5077ee02048128eda2a649236fadb595b66ee3
15f5d3b17 Switch DNSSeed-needed metric to any-automatic-nodes, not services (Matt Corallo)
5ee88b4bd Clarify docs for requirements/handling of addnode/connect nodes (Matt Corallo)
57edc0b0c Rename fAddnode to a more-descriptive "manual_connection" (Matt Corallo)
44407100f Replace relevant services logic with a function suite. (Matt Corallo)
Pull request description:
This was mostly written as a way to clean things up so that the NETWORK_LIMITED PR (#10387) can be simplified a ton, but its also a nice standalone cleanup that will also require a bit of review because it tweaks a lot of stuff across net. The new functions are fine in protocol.h right now since they're straight-forward, but after NETWORK_LIMITED will really want to move elsewhere after @theuni moves the nServices-based selection to addrman from connman.
Adds HasAllRelevantServices and GetRelevantServices, which check
for NETWORK|WITNESS.
This changes the following:
* Removes nRelevantServices from CConnman, disconnecting it a bit
more from protocol-level logic.
* Replaces our sometimes-connect-to-!WITNESS-nodes logic with
simply always requiring WITNESS|NETWORK for outbound non-feeler
connections (feelers still only require NETWORK).
* This has the added benefit of removing nServicesExpected from
CNode - instead letting net_processing's VERSION message
handling simply check HasAllRelevantServices.
* This implies we believe WITNESS nodes to continue to be a
significant majority of nodes on the network, but also because
we cannot sync properly from !WITNESS nodes, it is strange to
continue using our valuable outbound slots on them.
* In order to prevent this change from preventing connection to
-connect= nodes which have !WITNESS, -connect nodes are now
given the "addnode" flag. This also allows outbound connections
to !NODE_NETWORK nodes for -connect nodes (which was already true
of addnodes).
* Has the (somewhat unintended) consequence of changing one of the
eviction metrics from the same
sometimes-connect-to-!WITNESS-nodes metric to requiring
HasRelevantServices.
This should make NODE_NETWORK_LIMITED much simpler to implement.
Tree-SHA512: 90606896c86cc5da14c77843b16674a6a012065e7b583d76d1c47a18215358abefcbab44ff4fab3fadcd39aa9a42d4740c6dc8874a58033bdfc8ad3fb5c649fc
01b52ce Add comment explaining forced processing of compact blocks (Suhas Daftuar)
08fd822 qa: add test for minchainwork use in acceptblock (Suhas Daftuar)
ce8cd7a Don't process unrequested, low-work blocks (Suhas Daftuar)
Pull request description:
A peer could try to waste our resources by sending us unrequested blocks with
low work (eg to fill up our disk). Since e265200 we no longer request blocks until we
know we're on a chain with more than nMinimumChainWork (our anti-DoS
threshold), but we would still process unrequested blocks that had more work
than our tip (which generally has low-work during IBD), even though we may not
yet have found a headers chain with sufficient work.
Fix this and add a test.
Tree-SHA512: 1a4fb0bbd78054b84683f995c8c3194dd44fa914dc351ae4379c7c1a6f83224f609f8b9c2d9dde28741426c6af008ffffea836d21aa31a5ebaa00f8e0f81229e
eac64bb7a [qa] Test nMinimumChainWork (Suhas Daftuar)
0311836f6 Allow setting nMinimumChainWork on command line (Suhas Daftuar)
Pull request description:
As discussed briefly here: https://botbot.me/freenode/bitcoin-core-dev/2017-02-28/?msg=81712308&page=4
This adds a hidden command line option for setting `nMinimumChainWork`, which allows us to test this parameter in our functional tests, as well as allowing for niche use cases like syncing nodes that are otherwise disconnected from the network.
See also #10345, which proposes a new use of `nMinimumChainWork`.
Tree-SHA512: fe4d8f4f289697615c98d8760f1cc74c076110310ea0b5b875fcab78c127da9195b4eb84148aebacc7606c246e5773d3f13bd5d9559d0a8bffac20a3a28c62df
fafa003 qa: Remove never used return value of sync_with_ping (MarcoFalke)
fa9de37 qa: Make tmpdir option an absolute path (MarcoFalke)
Pull request description:
This should fix issues with the multiwallet test and its symlinks
when the tmpdir is a relative path.
Rather than fixing os.symlink to work with paths relative to a
directory descriptor, which does not work on Windows, normalize
the path instead.
Tree-SHA512: 189690f3d065ea2f0f48e06775c86d513d0916c7c86312432e8e16df160e65539e288c2bd53d49a4180735fa940f6fcd52b506ccd7d9815651a9b1a69850dda6
478a89c Avoid opening copied wallet databases simultaneously (Russell Yanofsky)
Pull request description:
Make sure wallet databases have unique fileids. If they don't, throw an error. BDB caches do not work properly when more than one open database has the same fileid, because values written to one database may show up in reads to other databases.
Bitcoin will never create different databases with the same fileid, but users can create them by manually copying database files.
BDB caching bug was reported by @dooglus in https://github.com/bitcoin/bitcoin/issues/11429
Tree-SHA512: e7635dc81a181801f42324b72fe9e0a2a7dd00b1dcf5abcbf27fa50938eb9a1fc3065c2321326c3456c48c29ae6504353b02f3d46e6eb2f7b09e46d8fe24388d
7104de8 [wallet] Fix leak in CDB constructor (João Barbosa)
Pull request description:
First commit fixes a minor leak.
Second commit improves the constructor in the failure cases.
Tree-SHA512: 5165413d60ed9fc28203c9fe128adbba03a9ea9e9aa3734d9ea2522dafd815ba0fb8b90fd0809dbc06eb3ad360e7764de01dadf653ade3350fe86f6b8f04bc90
5d465e396 Ensure backupwallet fails when attempting to backup to source file (Tomas van der Wansem)
Pull request description:
Previous behaviour was to destroy the wallet (to zero-length)
This fixes#11375
Tree-SHA512: bfd1738659b15e3f23b6bbdf55ec12269c62c820bf701daec19500b52bd5845bb5516733c6f76f36197eb155182a8a35dc239ad4de2ef1e59bbb0f124a455759
* check if we can lock before checking if it is conflicting, it is very rare a tx will actually be conflicting, whereas it is very common that a MN will not be able to sign for a specific Tx
Signed-off-by: Pasta <pasta@dashboost.org>
* remove unused variable
Signed-off-by: Pasta <pasta@dashboost.org>
* move sync check higher up
Signed-off-by: Pasta <pasta@dashboost.org>
* remove unused/unnecessary variable
Signed-off-by: Pasta <pasta@dashboost.org>
* remove unused variable
Signed-off-by: Pasta <pasta@dashboost.org>
* Revert "move sync check higher up"
This reverts commit 77fbe054df78b8bb12f686a627ef618ecff7e7a1.
* Make sure chainlocks and blocks are propagated in llmq-is-cl-conflicts.py before moving to next steps
Add few comments here and there to clarify what's actually going on under the hood
* Simplify
aa57590d7 Update importprivkey named args documentation (Dusty Williams)
Pull request description:
Addresses issue #11462 by updating the documentation for the importprivkey arguments to the correct names, and updates the functional test importprunedfunds.py to use named arguments when calling importprivkey.
Tree-SHA512: 64e14bf89c8c6eec9c37f6ec0c9fc0012fdb035d9ec32cd652110c75abaa922ec5c7523d6ec5098c8a7b42124159b5e330e070974eb79b8b92816f8d61074523
22f816ef4 net: Improve and document SOCKS code (Wladimir J. van der Laan)
Pull request description:
Make the SOCKS code more consistent, and document the constants used.
Tree-SHA512: 1bb04fcd6aacb6bfd2c54989d8298c892036466a895efb88be36fbace041af67c964ae0f5fb76c96f813f20a040109de4e0aac49a20844640e4d7633fcb22f25
696ce46 [Docs] Update Windows build instructions for using WSL and Ubuntu 17.04 (fanquake)
4f890ba Add new step to clean $PATH var by removing /mnt specific Window's %PATH% paths that cause issues with the make system (Donal OConnor)
Pull request description:
This updates the Windows build documentation with the workaround required to build using Ubuntu 17.04 on WSL, and makes it's explicit that building on Ubuntu 16.04 is broken, and not recommended.
This includes a commit from @donaloconnor in #11244, and is mostly the investigative work of @laanwj throughout #8732, #8653 and quite a few other issues.
I tested building on 14.04, 16.04.3 and 17.04 [here](https://github.com/bitcoin/bitcoin/pull/11244#issuecomment-327990251) and got the results we expect.
---
Built master at c22a53cd63 on a Windows 10 VM (Version 1607, OS Build 14393.1593) using WSL with Ubuntu 14.04.
Upgraded WSL to 16.04.3, and tried building c22a53cd63 using these instructions. The result is as expected.
Upgraded WSL to 17.04 and tried building 3255d6347b using these instructions.
If someone else could also verify that builds are working on both 14.04 and 17.04 with these instructions, that would be great.
Tree-SHA512: 866f1003eb45d208d8ae849504f54fc2f27c32240129d2124ce5a2ee7167bcbf062d29f23b1745123f532ffd0253a8611e719b2a316d1331d3c3924f91e7775d
0cd9273 rpc: Prevent `dumpwallet` from overwriting files (Wladimir J. van der Laan)
Pull request description:
Prevent arbitrary files from being overwritten by `dumpwallet`. There have been reports that users have overwritten wallet files this way. It may also avoid other security issues.
Fixes#9934. Adds mention to release notes and adds a test.
Tree-SHA512: 268c98636d40924d793b55a685a0b419bafd834ad369edaec08227ebe26ed4470ddea73008d1c4beb10ea445db1b0bb8e3546ba8fc2d1a411ebd4a0de8ce9120
96c2ce9 Fix validationinterface build on super old boost/clang (Matt Corallo)
Pull request description:
This should fix all the non-dependancy issues for termux builds.
See Github issue #11388.
Tree-SHA512: ff0918fa76a6d4639a6c5b5e045ef053ce1d93eb0b1fe94c5fdfcc4d5e54e1118eeb09676ffd8f6d1acd630a63656944c6274ee3dbd7c09b7129c30647dbf4f9
723aa1b qt: Backup former GUI settings on `-resetguisettings` (Wladimir J. van der Laan)
Pull request description:
Writes the GUI settings to `guisettings.bak` in the data directory before wiping them. This can be used to retroactively troubleshoot issues (e.g. #11262) where `-resetguisettings` solves the problem.
(as discussed in yesterday's IRC meeting)
Tree-SHA512: c64f5052d992eb02057ba285435f143c42d0cc456144a4c565e1c87be833737f9df750d0aee10810f85047c820d9b4f9f22fd94a6f09f4b28a9cf41b63a56586
d552ed6 Put back inadvertently removed copyright notices (Paul Berg)
Pull request description:
In an abundance of caution this restores "Bitcoin Developers" to the COPYING file in
case there were contributors before that point in time that would object to the
current label. It's harmless and more pedantically correct.
(Change extracted from the Bitcoin-abc github)
Tree-SHA512: ea71645fbca5548bcae750b9bb7c7cc56791d8c8d2574b778fa1666e09abad23b30fcb434f0d92c52a2eb7d7e89caa32695dff3a5a99a2ab43ed0f3636436677
13baf72 Replace save|restoreWindowGeometry with Qt functions (MeshCollider)
Pull request description:
Alternative to https://github.com/bitcoin/bitcoin/pull/11208, closes https://github.com/bitcoin/bitcoin/issues/11207
According to the [Qt documentation](https://doc.qt.io/qt-4.8/qwidget.html#restoreGeometry), restoreGeometry does all the checks we need, so it would be better to rely on them instead of doing it ourselves.
~Haven't tested this properly yet, hence the WIP.~
Gives expected behavior exactly as the other system apps do based on my tests. Only potential issue is the case when the GUI is almost entirely offscreen with only a single strip of pixels, its not really possible to see the GUI, but if you know it's there you can bring it back onscreen with just the mouse. And that's exactly how notepad behaves on Windows so I don't think its a real issue.
This also gives much better behavior when closing a maximized window, currently (0.15.0 release) a maximized window will save the window size on close, and then reopen as a not-maximized but still that size, which is really annoying. This reopens as maximized.
Gitian build here: https://bitcoin.jonasschnelli.ch/build/305
Tree-SHA512: a8bde14793b4316192df1fa2eaaeb32b44d5ebc5219c35252379840056cd737a9fd162625fd715987f275fec8375334ec1ec328dbc671563f084c611a938985c
7b137aced [Qt] Add delay before filtering transactions Fixes 3141 (Lucas Betschart)
Pull request description:
As discussed in https://github.com/bitcoin/bitcoin/issues/3141.
This adds a QTimer pause of 200ms before start to filter so it should be possible to filter big data sets easier.
Tree-SHA512: ee599367794eac2c5b8bc7ecac47f44295e40c0ff543ff2f2c4860590f917b59b1cfb273fa564e6eb4c44016c0ef412d49f1a8f1b36b07e034022f51bb76653c
5acd82de9 rpc: make estimatesmartfee argument naming consistent with documentation (Wladimir J. van der Laan)
24697c40e rpc: update cli for estimatefee argument rename (Wladimir J. van der Laan)
Pull request description:
The first argument of `estimaterawfee` was renamed from `nblocks` to `conf_target` in 06bcdb8da64502a64df03f3c89fbc6ccb72cd349. Update the client-side table as well.
This makes #10753 pass again.
Tree-SHA512: 107c0072a45e0f4e083dc803d534973e6bd4c005e62337a867815d7c98ab1c21d97b7a495c32763883975cbbb001b80003001a6709b7d9bdd81ce4d441b667be
a1ea1cfbd qt: Use IsMine to validate custom change address (Chris Moore)
Pull request description:
Fixes#11137Closes#11184 (which was accidentally opened against 0.15 branch)
Tree-SHA512: a20a59b4f36c1471a9c84bcc7c69048576d1f413104c299a7ed9ba221f28eddf93d727fca2926420ea5d0dd9aba582924f26a5acd44d995039b7202c73eb53bc
82dd719 rpc: Write authcookie atomically (Wladimir J. van der Laan)
Pull request description:
Use POSIX rename atomicity at the `bitcoind` side to create a working
cookie atomically:
- Write `.cookie.tmp`, close file
- Rename `.cookie.tmp` to `.cookie`
This avoids clients reading invalid/partial cookies as in #11129. As such, this is an alternative to that PR.
Tree-SHA512: 47fcc1ed2ff3d8fed4b7441e4939f29cc99b57b7a035673c3b55a124a2e49c8a904637a6ff700dd13a184be8c0255707d74781f8e626314916418954e2467e03
03bc719a8 [wallet] Close DB on error. (Karl-Johan Alm)
Pull request description:
This PR intends to plug some leaks. It specifically implements adherence to the requirement in BDB to close a handle which failed to open (https://docs.oracle.com/cd/E17276_01/html/api_reference/C/dbopen.html):
> The `DB->open()` method returns a non-zero error value on failure and 0 on success. If `DB->open()` fails, the `DB->close()` method must be called to discard the DB handle.
Tree-SHA512: cc1f2b925ef3fd6de785f62108fbc79454443397f80707762acbc56757841d2c32b69c0234f87805571aa40c486da31f315ca4c607a2c7d1c97c82a01301e2a6
