* Be more accurate with denom creation/consumption
- Calculate and pass an actual balance needed to be denominated to CreateDenominated.
- Drop GetNeedsToBeAnonymizedBalance and fix corresponding conditions: do not overshoot, do not check max pool amount - these conditions are handled outside.
- Properly calculate various balance limits.
- Handle edge case for the final denom.
* Add an option to control max number of denoms created and respect it
`-privatesenddenoms`, default is 300
Note: CreateDenominated failure is not an error anymore
* Add few more stats to log in DoAutomaticDenominating
* Report `instantlock: true` for transactions locked via ChainLocks
Also introduce `instantlock_internal` to show the actual lock state.
* Always show instantlock_internal
* Fix potential deadlock in LoadWallet()
```
POTENTIAL DEADLOCK DETECTED
Previous lock order was:
(1) cs_main wallet/wallet.cpp:3881
(2) cs_wallet wallet/wallet.cpp:3881
Current lock order is:
(2) pwallet->cs_wallet wallet/walletdb.cpp:589
(1) cs_main wallet/wallet.cpp:1252
```
* Add comment in CWallet::MarkConflicted re new cs_main lock in CWalletDB::LoadWallet()
* Don't rely on UTXO set in CheckCanLock
The UTXO set only works for TXs in the mempool and won't work when we try
to retroactively lock unlocked TXs from blocks.
This is safe as ProcessTx is only called when a TX was accepted into the
mempool or connected in a block, which means that all input checks were
good.
* Rename RetryLockMempoolTxs to RetryLockTxs and let it retry connected TXs
* Instead of manually calling ProcessTx, let SyncTransaction handle all cases
SyncTransaction is called from AcceptToMemoryPool and when transactions got
connected in a block. So this is the time we want to run TXs through
ProcessTx. This also enables retroactive signing of TXs that were unknown
before a new block appeared.
* Test retroactive signing and safe TXs in LLMQ ChainLocks tests
* Also test for retroactive signing of chained TXs
* Honor lockedParentTx when looking for TXs to retry signing
* Stop scanning for TXs to retry after a depth of 6
* Generate 6 block to avoid retroactive signing overloading Travis
* Avoid retroactive signing
* Don't rely on NewPoWValidBlock and use SyncTransaction to build blockTxs
NewPoWValidBlock is not guaranteed to be called when blocks come in fast.
When a block is accepted in AcceptBlock, NewPoWValidBlock is only called
when the new block is a successor of the currently active tip. This is not
the case when after the first block a second block is accepted immediately
as the first block is not connected yet.
This might be a bug actually in the handling of NewPoWValidBlock, so we
might need to check/fix this later, but currently I prefer to not touch
that part.
Instead, we now use SyncTransaction to gather TXs for blockTxs. This works
because SyncTransaction is called for all transactions in a freshly
connected block in one go. The call also happens before UpdatedBlockTip is
called, so it's fine with the existing logic.
* Use tx.IsCoinBase() instead of checking index 0
Also check for empty vin.
* Remove unused parameters from CInstantSendManager::ProcessTx
* Pass txHash in CheckCanLock by reference instead of pointer
* Dont' allow locking of TXs without inputs
* Remove unused local variable nInstantSendConfirmationsRequired
* Don't subtract 1 from nInstantSendConfirmationsRequired
This was necessary in the old system but is not necessary in the new system.
It also prevented proper retroactive signing of chained TXs in regtest as
it resulted in child TXs to return true immediately for CheckCanLock when
it should actually have waited for the parent TX to become locked first.
* Access chainActive.Height() while cs_main is locked
* Properly read and write lastChainLockBlock
"pindex" is NOT the chainlocked block after the while loop finishes. We
must use the pindex (renamed to pindexChainLock now) given on method entry.
Also, the GetLastChainLockBlock() result was not assigned to,
lastChainLockBlock which resulted in the while loop to run unnecessarily
long.
* Generalize filtering in NewPoWValidBlock and SyncTransaction
We're actually interested in all TXs that have inputs, so no need to
explicitly check for tx types.
* Use tx.IsCoinBase() instead of checking for index 0
* Handle cases where a TX is not received yet in wait_for_instantlock
* Wait on all nodes for the locks
Otherwise we end up with the sender having it locked but other nodes
not yet, failing the test.
* Fix LogPrintf call in CChainLocksHandler::DoInvalidateBlock
This requires the removal of some very liberal (incorrect) cs_mains
sprinkled in some tests. It adds some chainActive.Tip() races, but
the tests are all single-threaded anyway.
dcf2112 Add safe flag to listunspent result (NicolasDorier)
af61d9f Add COutput::fSafe member for safe handling of unconfirmed outputs (Russell Yanofsky)
Tree-SHA512: 311edb6fa8075b3ede5b24cb8c6e5d133ccd8ac9ecafea07b604ffa812ee4f071337e31695e662d8573590a0460af20aaaeb39d49c9ea87924449ea50bdfb0b3
ad1ae7a Check and enable -Wshadow by default. (Pavel Janík)
9de90bb Do not shadow variables (gcc set) (Pavel Janík)
Tree-SHA512: 9517feb423dc8ddd63896016b25324673bfbe0bffa97f22996f59d7a3fcbdc2ebf2e43ac02bc067546f54e293e9b2f2514be145f867321e9031f895c063d9fb8
d678771 Wallet: Sanitise -wallet parameter (Luke Dashjr)
9756be3 Wallet/RPC: Use filename rather than CWallet pointer, for lockwallet RPCRunLater job name (Luke Dashjr)
86be48a More tightly couple EnsureWalletIsAvailable with GetWalletForJSONRPCRequest where appropriate (Luke Dashjr)
a435632 Move wallet RPC declarations to rpcwallet.h (Luke Dashjr)
ad15734 RPC: Pass on JSONRPCRequest metadata (URI/user/etc) for "help" method (Luke Dashjr)
bf8a04a Reformat touched lines with C++11 (Luke Dashjr)
2e518e3 Move nWalletUnlockTime to CWallet::nRelockTime, and name timed task unique per CWallet (Luke Dashjr)
d77ad6d RPC: Do all wallet access through new GetWalletForJSONRPCRequest (Luke Dashjr)
eca550f RPC/Wallet: Pass CWallet as pointer to helper functions (Luke Dashjr)
Tree-SHA512: bfd592da841693390e16f83b451503eb5cedb71208089aa32b3fc45e973555584a3ed7696dd239f6409324464d565dacf0f3d0e36e8e13ae6a7843848465f960
7ed143c Add test for CWalletTx::GetImmatureCredit() returning stale values. (Russell Yanofsky)
Tree-SHA512: c95088ed6dfc5a0774ddaa2fe14ac0a9ebd830922a4d77100ec3d51fdeb6df40ad97de4f2ea970ed0f4122dcc0022ee1d43ab3c7188becd7f90c1c6af0ed39b7
* No need to translate "Dash"
* Fix missing dashification
* Update docs
* Fix cmd-line params help
- `bool` should have no `=<smth>`
- non-`bool` should have proper `<smth>`
* Fix `quorum dkgstatus` help
* add llmq/ into files.md
* Merge #9744: Remove unused module from rpc-tests
a432aa0 Remove unused module from rpc-tests (Takashi Mitsuta)
* Merge #9696: [trivial] Fix recently introduced typos in comments
0c9b9b7 [trivial] Fix recently introduced typos in comments (practicalswift)
* Merge #9657: Improve rpc-tests.py
a6a3e58 Various review markups for rpc-tests.py improvements (John Newbery)
3de3ccd Refactor rpc-tests.py (John Newbery)
afd38e7 Improve rpc-tests.py arguments (John Newbery)
91bffff Use argparse in rpc_tests.py (John Newbery)
1581ecb Use configparser in rpc-tests.py (John Newbery)
* Merge #9724: Qt/Intro: Add explanation of IBD process
f6d18f5 Qt/Intro: Explain a bit more what will happen first time (Luke Dashjr)
50c5657 Qt/Intro: Storage shouldn't grow significantly with pruning enabled (Luke Dashjr)
9adb694 Qt/Intro: Move sizeWarningLabel text into C++ code (Luke Dashjr)
* Merge #9794: Minor update to qrencode package builder
1bfe6b4 Use package name variable inside $(package)_file_name variable (Mitchell Cash)
* Merge #9726: netbase: Do not print an error on connection timeouts through proxy
3ddfe29 netbase: Do not print an error on connection timeouts through proxy (Wladimir J. van der Laan)
13f6085 netbase: Make InterruptibleRecv return an error code instead of bool (Wladimir J. van der Laan)
* Merge #9727: Remove fallbacks for boost_filesystem < v3
056aba2 Remove fallbacks for boost_filesystem < v3 (Wladimir J. van der Laan)
* Merge #9485: ZMQ example using python3 and asyncio
b471daf Adddress nits, use asyncio signal handling, create_task (Bob McElrath)
4bb7d1b Add python version checks and 3.4 example (Bob McElrath)
5406d51 Rewrite to not use Polling wrapper for asyncio, link to python2.7 example (Bob McElrath)
5ea5368 ZMQ example using python3 and asyncio (Bob McElrath)
* Merge #9807: RPC doc fix-ups.
851f6a3 [qa][doc] Correct rpc test options in readme (fanquake)
41e7219 [trivial] Add tests_config.ini to .gitignore (fanquake)
* Dashify
Co-Authored-By: PastaPastaPasta <pasta@dashboost.org>
* Change file permissions
* update travis.yml -parallel -> --jobs
