c0025d0 Fix segfault when shutting down before fully loading (Matt Corallo)
1385697 Order chainstate init more logically. (Matt Corallo)
ff3a219 Call RewindBlockIndex even if we're about to run -reindex-chainstate (Matt Corallo)
b0f3249 More user-friendly error message if UTXO DB runs ahead of block DB (Matt Corallo)
eda888e Fix some LoadChainTip-related init-order bugs. (Matt Corallo)
Pull request description:
This does a number of things to clean up chainstate init order,
fixing some issues as it goes:
* Order chainstate init more logically - first all of the
blocktree-related loading, then coinsdb, then
pcoinsTip/chainActive. Only create objects as needed.
* More clearly document exactly what is and isn't called in
-reindex and -reindex-chainstate both with comments noting
calls as no-ops and by adding if guards.
* Move the writing of fTxIndex to LoadBlockIndex - this fixes a
bug introduced in d6af06d68aae985436cbc942f0d11078041d121b where
InitBlockIndex was writing to fTxIndex which had not yet been
checked (because LoadChainTip hadn't yet initialized the
chainActive, which would otherwise have resulted in
InitBlockIndex being a NOP), allowing you to modify -txindex
without reindex, potentially corrupting your chainstate!
* Rename InitBlockIndex to LoadGenesisBlock, which is now a more
natural name for it. Also check mapBlockIndex instead of
chainActive, fixing a bug where we'd write the genesis block out
on every start.
* Move LoadGenesisBlock further down in init. This is a more logical
location for it, as it is after all of the blockindex-related
loading and checking, but before any of the UTXO-related loading
and checking.
* Give LoadChainTip a return value - allowing it to indicate that
the UTXO DB ran ahead of the block DB. This just provides a nicer
error message instead of the previous mysterious
assert(!setBlockIndexCandidates.empty()) error.
* Calls ActivateBestChain in case we just loaded the genesis
block in LoadChainTip, avoiding relying on the ActivateBestChain
in ThreadImport before continuing init process.
* Move all of the VerifyDB()-related stuff into a -reindex +
-reindex-chainstate if guard. It couldn't do anything useful
as chainActive.Tip() would be null at this point anyway.
Tree-SHA512: 3c96ee7ed44f4130bee3479a40c5cd99a619fda5e309c26d60b54feab9f6ec60fabab8cf47a049c9cf15e88999b2edb7f16cbe6819e97273560b201a89d90762
a5ecaf1 Fix misspellings and remove safety verbiage (Steven D. Lander)
Pull request description:
Standardizing punctuation on CLI output and also including a few fixes for grammer. This PR is for text only changes and includes no code edits.
Tree-SHA512: afde551bf1212838822188b6723f2bf1b7222decfa1cd7aa6b04967489108a29f80833af6059252af028c53437755f258275af0614e0d4d0311e09421cd8e131
1fc8c3d No longer ever reuse keypool indexes (Matt Corallo)
Pull request description:
This fixes an issue where you could reserve a keypool entry, then
top up the keypool, writing out a new key at the given index, then
return they key from the pool. This isnt likely to cause issues,
but given there is no reason to ever re-use keypool indexes
(they're 64 bits...), best to avoid it alltogether.
Builds on #10235, should probably get a 15 tag.
Tree-SHA512: c13a18a90f1076fb74307f2d64e9d80149811524c6bda259698ff2c65adaf8c6c3f2a3a07a5f4bf03251bc942ba8f5fd33a4427aa4256748c40b062991682caf
06bcdb8da Convert named argument from nblocks to conf_target (Alex Morcos)
439c4e8ad Improve api to estimatesmartfee (Alex Morcos)
Pull request description:
Through 0.14 branch, the estimatesmartfee API was tagged "WARNING: This interface is unstable and may disappear or change!" and this warning is removed for 0.15, so any wanted API updates should happen now.
The changes here are to make the additional parameter for conservative estimates a more general estimate_mode string , to omit the feerate and include an error string instead of returning -1 on error, and to do better parameter checking initially.
~It is only the last 2 commits, but it's built on #10706 and #10543~.
See https://github.com/bitcoin/bitcoin/pull/10707#issuecomment-314869251 for renaming of nblocks argument to conf_target. Will need to be included before string freeze.
PR description edited for clarity
Tree-SHA512: 6d8ebee8bb410e2950ffd59663eebfed8d1611d995dc935bb91e430d9da7e2f306796f45631458376027d26341c660f09e825e61748103d2f2736ec6dc3df3ae
* remove liquidity provider. The reason behind this is two fold:
1. it is very likely nobody is currently running this on the mainnet (due to already strong liquidity), it provides no use for testnet as there you can just enable mixing and get the same affect. Because of this reason I don't find it okay to just remove it outright.
2. even if people did use it (or if some do as a novelty) it likely hurts the privacy of the system. This is because as a liquidity provider your outputs will always take many (sometimes hundreds) blocks before being used in a new mixing round, whereas real user's funds will normally be mixed again very rapidly.
Signed-off-by: Pasta <pasta@dashboost.org>
* remove unused function
Signed-off-by: Pasta <pasta@dashboost.org>
* clarify comment regarding default peer connections and how that applies to MNs
Signed-off-by: Pasta <pasta@dashboost.org>
* clarify debug log when maxconnections is force set
Signed-off-by: Pasta <pasta@dashboost.org>
faa24441ec047ec336b86f586016b9d318c1c0ad policy: Remove promiscuousmempoolflags (MarcoFalke)
Pull request description:
It seems odd to clutter validation code with features that can only ever be used for testing (testnet or regtest). Removing that test-only code makes the mempool logic less painful to understand and easier to reason about when changed or refactored in the future.
Tree-SHA512: 3b897aa9604ac8d82ebe9573c6efd468c93ddaa08d378ebc902e247b7aa6c68fcde71e5b449c08f17a067146cdc66dc50a67ce06d07607c27e5189a49c3fba3f
4ccc12a [qa] Rewrite BIP66 functional tests (Suhas Daftuar)
d4f0d87 [qa] Rewrite BIP65 functional tests (Suhas Daftuar)
Pull request description:
After 122786d, BIP65 and BIP66 activate at
particular fixed heights (without regard to version numbers of blocks
below those heights). Rewrite the functional tests to take
this into account, and remove two tests that weren't really testing anything.
Moves the rewritten functional tests out of the extended test suite, so that they run in travis regularly.
Note: I discovered that the ComparisonTestFramework (which the original versions of these p2p tests were written is, has a bug that caused them to not catch obvious errors, eg if you just comment out setting the script flags for these softforks in ConnectBlock, the versions of these tests in master do not fail(!) -- will separately PR a fix for the comparison test framework).
4d4fb33fc Rename member field according to the style guide. (Pavel Janík)
Pull request description:
After #10193, approx. five instances of this warning are printed when compiling with `-Wshadow`:
```
In file included from txmempool.cpp:14:
./reverse_iterator.h:20:22: warning: declaration shadows a field of 'reverse_range<T>' [-Wshadow]
reverse_range(T &x) : x(x) {}
^
./reverse_iterator.h:17:8: note: previous declaration is here
T &x;
^
1 warning generated.
```
Tree-SHA512: 6c07c2ed6f4f232a3a8bdcdd6057040967c74552fd29d80f42e8a453b95baf203c410aa31dccc08ff2e765cbba02b1a282f6ea7804955f09b31ab20ef383792e
86279464b [RPC] trivial: gettxout no longer shows version of tx (Felix Weis)
Pull request description:
Since the switch to a per-txout chainstate db in #10195, the tx version information is no longer stored. Updated `gettxout` rpc help text accordingly.
Tree-SHA512: 3d7f42ef0f649056ece98bf22a1e972d1876324733adc81fa31bc2cd160550c5b6cb8682209fb8e8dbc56a8139ed5f5f0e740945f709039e69d52997ddbca7b8
f4d00e6 Add a discard_rate (Alex Morcos)
b138585 Remove factor of 3 from definition of dust. (Alex Morcos)
Pull request description:
The definition of dust is redefined to remove the factor of 3.
Dust is redefined to be the value of an output such that it would
cost that value in fees to (create and) spend the output at the dust
relay rate. The previous definition was that it would cost 1/3 of the
value. The default dust relay rate is correspondingly increased to
3000 sat/kB so the actual default dust output value of 546 satoshis
for a non-segwit output remains unchanged. This commit is a refactor
only unless a dustrelayfee is passed on the commandline in which case
that number now needs to be increased by a factor of 3 to get the same
behavior. -dustrelayfee is a hidden command line option.
Note: It's not exactly a refactor due to edge case changes in rounding
as evidenced by the required change to the unit test.
A discard_rate is added which defaults to 10,000 sat/kB
Any change output which would be dust at the discard_rate you are
willing to discard completely and add to fee (as well as continuing to
pay the fee that would have been needed for creating the change)
This would be a nice addition for 0.15 and I think will remain useful for 0.16 with the new coin selection algorithms in discussion, but its not crucial.
It does add translation strings, but we could (should?) avoid that by hiding the option
Tree-SHA512: 5b6f655354d0ab6b8b6cac1e8d1fe3136d10beb15c6d948fb15bfb105155a9d03684c6240624039b3eed6428b7e60e54216cc8b2f90c4600701e39f646284a9b
Signed-off-by: Pasta <pasta@dashboost.org>
cf82a9e Do not allow users to get keys from keypool without reserving them (Matt Corallo)
Pull request description:
fundrawtransaction allows users to add a change output and then
not have it removed from keypool. While it would be nice to have
users follow the normal CreateTransaction/CommitTransaction process
we use internally, there isnt much benefit in exposing this option,
especially with HD wallets, while there is ample room for users to
misunderstand or misuse this option.
This partially reverts #9377. Would be nice to get this for 15 since its kinda crazy we have this option to begin with IMO, will need release notes as an RPC option is now ignored.
Tree-SHA512: 72b5ee9c4a229b84d799dfb00c56fe80d8bba914ce81a433c3f5ab325bf9bf2b839ee658c261734f0ee183ab19435039481014d09c41dbe155e6323e63beb01d
f228b8e remove some unused functions (Marko Bencun)
Pull request description:
Identified with `cppcheck --enable=unusedFunction .`.
- GetSendBufferSize()'s last use removed in
991955e
- SetPort()'s last use removed in
7e195e8
- GetfLargeWorkInvalidChainFound() was introduced in
e3ba0ef and never used
Tree-SHA512: ea8e5498bec981e42e1342c171c37723c2f5e575c7d6c1a524d9c6cd9b332bdd0d84fddf9e14ca011bb49fb82bd037386382c9afc546b3c2231ae548358bd4f4
Signed-off-by: Pasta <pasta@dashboost.org>
a56f8b0 Add missing lock in CScheduler::AreThreadsServicingQueue() (Matt Corallo)
Pull request description:
Not an actual bug as this is only used in asserts right now, but
nice to not have a missing lock.
Tree-SHA512: 7e542b150a0be716783e196493d239f2ad15e5376abf54b67d735dc3ef1b10849c090337b849f530c9f7497ddcfb8389b47d64a5dcf6382b7d38838f88cc1100
1f668b6 Expose if CScheduler is being serviced, assert its not in EmptyQueue (Matt Corallo)
3192975 Flush CValidationInterface callbacks prior to destruction (Matt Corallo)
08096bb Support more than one CScheduler thread for serial clients (Matt Corallo)
2fbf2db Add default arg to CScheduler to schedule() a callback now (Matt Corallo)
cda1429 Give CMainSignals a reference to the global scheduler (Matt Corallo)
3a19fed Make ValidationInterface signals-type-agnostic (Matt Corallo)
ff6a834 Use TestingSetup to DRY qt rpcnestedtests (Matt Corallo)
Tree-SHA512: fab91e34e30b080ed4d0a6d8c1214910e383c45440676e37be61d0bde6ae98d61e8903d22b846e95ba4e73a6ce788798350266feba246d8a2ab357e8523e4ac5
9f8a46f Properly document target_confirmations in listsinceblock (Ryan Havar)
Pull request description:
There seems to be some misunderstandings about this, but it's a heavily used function so I'd like to make sure the docs are clear about how it works.
For a later issue:
* Change the default of target_confirmations to 6 (1 is a pretty silly default)
* Change the name of target_confirmations (it's really a horrible name)
Tree-SHA512: a2fba2fab30019cea9db56cd7e31de95ba31090617ab336bdf130f9591bfcf3fc5fbd9e7e1e40b6c7bd2f74b9b4658afb1fdc7fc44e1f79520d1319758982a1c
99c7fc3 Prevent user from specifying conflicting parameters to fundrawtx (Matt Corallo)
Pull request description:
estimate_mode/conf_target both are overridden by feeRate, so should
not be specified together with feeRate.
Based on #10706
Tree-SHA512: 8ccd08575fd1f2a0d45112538ffbbc73983ee172963230b0cc7ac41d13c6f3c740917f82b212c41ded3a64d873452e7f2c7af49f3b47cab897f8e85117f21333
Contains RBF stuff to be removed in a later commit
11590d3 Properly bound check conf_target in wallet RPC calls (Alex Morcos)
fd29d3d Remove checking of mempool min fee from estimateSmartFee. (Alex Morcos)
2fffaa9 Make QT fee displays use GetMinimumFee instead of estimateSmartFee (Alex Morcos)
1983ca6 Use CoinControl to pass custom fee setting from QT. (Alex Morcos)
03ee701 Refactor to use CoinControl in GetMinimumFee and FeeBumper (Alex Morcos)
ecd81df Make CoinControl a required argument to CreateTransaction (Alex Morcos)
Pull request description:
This builds on #10589 (first 5 commits from that PR, last 5 commits are new)
The first couple commits refactor to use the CCoinControl class to pass fee calculation parameters around.
This allows for fixing the buggy interaction in QT between the global payTxFee which can be modified by the RPC call settxfee or temporarily modified by the QT custom fee settings. Before these changes the GUI could sometimes send a transaction with a recently set payTxFee and not respect the settings displayed in the GUI. After these changes, using the GUI does not involve the global transaction confirm target or payTxFee.
The prospective fee displays in the smart fee slider and the coin control dialog are changed to use the fee calculation from GetMinimumFee, this simplifies the code and makes them slightly more correct in edge cases.
Maxing the fee calculation with the mempool min fee is move from estimateSmartFee to GetMinimumFee.
This fixes a long standing bug, and should be tagged for 0.15 as it is holding up finalizing the estimatesmartfee RPC API before release.
Tree-SHA512: 4d36a1bd5934aa62f3806d380fcafbef73e9fe5bdf190fc5259a3e3a13349e5ce796e50e7068c46dc630ccf56d061bce5804f0bfe2e082bb01ca725b63efd4c1
* Refactor `HandleFullyConfirmedBlock()`
* Pass `pindexMined` into `AddNonLockedTx()`
* Unify time import in Dash specific tests
* Refactor UpdateSpork and SetPrivKey
* Merge #10757: RPC: Introduce getblockstats to plot things
41d0476f62269027ec2193a5f80d508d789de8aa Tests: Add data file (Anthony Towns)
4cbfb6aad9ba8fa17b5e7ed3e9a36dc8a24f1fcf Tests: Test new getblockstats RPC (Jorge Timón)
35e77a0288bcac5594ff25c10c9679a161cb730b RPC: Introduce getblockstats (Jorge Timón)
cda8e36f019dd181e5c3774961b4f1335e5602cb Refactor: RPC: Separate GetBlockChecked() from getblock() (Jorge Timón)
Pull request description:
It returns per block statistics about several things. It should be easy to add more if people think of other things to add or remove some if I went too far (but once written, why not keep it? EDIT: answer: not to test or maintain them).
The currently available options are: minfee,maxfee,totalfee,minfeerate,maxfeerate,avgfee,avgfeerate,txs,ins,outs (EDIT: see updated list in the rpc call documentation)
For the x axis, one can use height or block.nTime (I guess I could add mediantime if there's interest [EDIT: nobody showed interest but I implemented mediantime nonetheless, in fact there's no distinction between x or y axis anymore, that's for the caller to judge]).
To calculate fees, -txindex is required.
Tree-SHA512: 2b2787a3c7dc4a11df1fce62c8a4c748f5347d7f7104205d5f0962ffec1e0370c825b49fd4d58ce8ce86bf39d8453f698bcd46206eea505f077541ca7d59b18c
* Replace get_mocktime() usage with self.mocktime
