* Remove CActiveLegacyMasternodeManager
* Remove sentinelping RPC
* Remove unused P2P messages and inv types
There are still places where these are used in the code. The next commits
will clean these up.
* Remove MNB/MNP/MNVERIFY related code from masternode(man).h/cpp
* Remove all legacy code regarding block MN payee voting
* Remove MASTERNODE_SYNC_LIST and MASTERNODE_SYNC_MNW states
Also replace all uses of IsMasternodeListSynced and IsWinnersListSynced
with IsBlockchainSynced.
* Remove unsupported masternode RPCs
* Remove UpdateLastPaid methods
* Remove duplicate deterministicmns.h include
* Remove masternode.conf support
* Remove legacy MN lists support from masternode list GUI
* Remove unnecessary AskForMN call
* Remove compatibility code in CPrivateSendQueue::GetSignatureHash
* Don't add locally calculated MN payee in case GetBlockTxOuts failed
This is not valid in DIP3 mode
* Remove check for IsDeterministicMNsSporkActive in "masternode status"
* Move CMasternode::IsValidNetAddr to CActiveDeterministicMasternodeManager
* Remove use of CMasternode::CheckCollateral in governance code
* Remove uses of MASTERNODE_SENTINEL_PING_MAX_SECONDS/MASTERNODE_SENTINEL_PING_MAX_SECONDS
* Remove support for "-masternodeprivkey"
* Remove pre-DIP3 vote cleanup
* Remove compatibility code for quorumModifierHash/masternodeProTxHash
* Remove check for invalid nBlockHeight in CMasternodePayments::GetBlockTxOuts
...and let it crash instead. We expect this method to be called with the
correct height now (after DIP3 was fully deployed).
* Remove ECDSA based Sign/CheckSignature from CGovernanceObject
Only masternodes sign governance objects, so there is no need for ECDSA
support here anymore.
* Always add superblock and MN reward payments into new block
* Always check block payees (except if fLiteMode==true)
* Always allow superblock and MN payees in same block
* Remove/Fix a few references to masternode.conf and related stuff
Also delete guide-startmany.md and masternode_conf.md
* Implement NotifyMasternodeListChanged signal and call governance maintenance
* Remove non-DIP3 code path from CMasternodeMan::Find
* Remove remaining unused code from CMasternode/CMasternodeMan
* Always load governance.dat on startup
* Mine an empty block instead of incrementing nHeight from chain tip in miner tests
This test is crashing otherwise in GetBlockTxOuts as it tries to access a
previous block that is not existing.
* Skip MN payments verification on historical blocks (pre-DIP3 blocks)
Even though DIP3 was active on BIP9 level, the spork was not active yet at
that point meaning that payments were not enforced at that time.
* Remove unused state and CollateralStatus enums
* Unconditionally return false from IsBlockPayeeValid when IsTransactionValid returns false
IsTransactionValid already handles the case where IsDIP3Active() returns
false, making it return true.
* Add override keyword to CDSNotificationInterface::NotifyMasternodeListChanged
* Fix help for masternodelist status (POSE_BANNED and no OUTPOINT_SPENT)
* Replace IsDeterministicMNsSporkActive with IsDIP3Active
IsDIP3Active will now use a fixed parameter from consensus params.
Values for DIP0003Height/DIP0003Hash need to be updated when spork15
activates on mainnet.
Also enforce correct block hash on testnet/mainnet for DIP3 activation
block.
* Remove SPORK_15_DETERMINISTIC_MNS_ENABLED
* Replace all uses of IsDeterministicMNsSporkActive with IsDIP3Active
* Remove DIP3 upgrade-path tests and directly start with DIP3 enabled tests
* Make -masternodeprivkey non-mandatory
This code will vanish later.
1. Enforce payment to masternodes in IsBlockPayeeValid even if superblocks
are triggered. This new rule only gets activated when spork15 activates.
2. Always enforce masternode payments when spork15 is activated and ignore
spork8 in that case. spork8 can be removed after spork15 activation
and hardening of the spork15 height into consensus params.
* Prepare for DIP3 operator reward payments and switch to array in getblocktemplate
This commit allows to later split MN rewards into multiple recipients, e.g.
the owner reward and operator reward. It also updates the getblocktemplate
output to return an array of MN payments instead of a single entry.
This should allow MN miners and pool operators to prepare themself for the
upcoming changes in regard to operator rewards.
* txoutsMasternode -> voutMasternode
* More renaming
* Consider all masternode payments when looking for a known masternode
* RPC: fix listunspent include_unsafe param usage
* RPC: Add two fields to indicate if some mempool entry is an InstantSend tx and if it was locked or not
* RPC: Add privatesend_balance to getwalletinfo rpc
* RPC: "BTC" -> CURRENCY_UNIT
* RPC: more EnsureWalletIsAvailable in Dash-specific code
* RPC: EnsureWalletIsUnlocked in `gobject prepare`
Also fixes missing cs_wallet lock
* RPC: disable `privatesend` rpc on masternodes completely
* RPC: refactor `spork` rpc
* RPC: Show correct port in HelpExampleRpc
* RPC: few trivial fixes
* fix
* Drop BOOST_FOREACH in Dash-specific code (only), no changes in behavior
* Use references in loops (use const references where applicable) in Dash-specific code (only)
And adjust related code to make it compilable.
* Loop through nodes via connman.ForEachNode in dsq Relay instead of creating a copy
30f30c0 Add braces to submitblock per current style. (Gregory Maxwell)
4f15ea1 Check transaction count early in submitblock. (Gregory Maxwell)
ada0caa Make GetWitnessCommitmentIndex callable on blocks without a coinbase txn. (Gregory Maxwell)
Tree-SHA512: 02dcd337ad9cdd8e4fa6a42c009d016026d1229c193676ed6fcc9ce55e924fedec57f516ac1e95c3db0985243ba908307338ce783a70416cb292bed881002bfc
4e7e2e1 Update RPC argument names (John Newbery)
481f289 rpc: Named argument support for bitcoin-cli (Wladimir J. van der Laan)
9adb4e1 rpc: Argument name consistency (Wladimir J. van der Laan)
8d713f7 rpc: Named arguments for rawtransaction calls (Wladimir J. van der Laan)
37a166f rpc: Named arguments for wallet calls (Wladimir J. van der Laan)
78b684f rpc: Named arguments for mining calls (Wladimir J. van der Laan)
b8ebc59 rpc: Named arguments for net calls (Wladimir J. van der Laan)
2ca9dcd test: Add test for RPC named arguments (Wladimir J. van der Laan)
fba1a61 rpc: Named arguments for misc calls (Wladimir J. van der Laan)
286ec08 rpc: Add 'echo' call for testing (Wladimir J. van der Laan)
495eb44 rpc: Named arguments for blockchain calls (Wladimir J. van der Laan)
6f1c76a rpc: Support named arguments (Wladimir J. van der Laan)
5865d41 authproxy: Add support for RPC named arguments (Wladimir J. van der Laan)
dd0df81 Document ConnectBlock connectTrace postconditions (Matt Corallo)
2d6e561 Switch pblock in ProcessNewBlock to a shared_ptr (Matt Corallo)
2736c44 Make the optional pblock in ActivateBestChain a shared_ptr (Matt Corallo)
ae4db44 Create a shared_ptr for the block we're connecting in ActivateBCS (Matt Corallo)
fd9d890 Keep blocks as shared_ptrs, instead of copying txn in ConnectTip (Matt Corallo)
6fdd43b Add struct to track block-connect-time-generated info for callbacks (Matt Corallo)
b4e4ba4 Introduce convenience type CTransactionRef (Pieter Wuille)
1662b43 Make CBlock::vtx a vector of shared_ptr<CTransaction> (Pieter Wuille)
da60506 Add deserializing constructors to CTransaction and CMutableTransaction (Pieter Wuille)
0e85204 Add serialization for unique_ptr and shared_ptr (Pieter Wuille)
e7156ad [RPC] pass HTTP basic authentication username to the JSONRequest object (Jonas Schnelli)
69d1c25 [RPC] Give RPC commands more information about the RPC request (Jonas Schnelli)
23c32a9 rpc: Change JSONRPCRequest to JSONRPCRequestObj (Wladimir J. van der Laan)
MiningRequiresPeers() was not used at all. I checked the Bitcoin
code and even there it is set but then ignored. Updated getblocktemplate
to actually honor the value.
The check also removes the need for IsInitialBlockDownload() to be false.
As regtest nodes start with an empty chain they won't be able to use
getblocktemplate for mining otherwise.
c2dd5a3 FIX: correctly measure size of priority block (Alex Morcos)
a278764 FIX: Account for txs already added to block in addPriorityTxs (Alex Morcos)
4dc94d1 Refactor CreateNewBlock to be a method of the BlockAssembler class (Alex Morcos)
* Protocol Doc - correct type of DSQ nTime and fReady fields
* Basic typo correction
* RPC help typos
- Change port in DisconnectNode example from Bitcoin port -> Dash port
- Correct order of chainwork in getblockheader/getblockheaders help to
match actual output
- Add missing fields to getmininginfo/getblocktemplate help output
* Remove duplicate generate field in getmininginfo output
* Fix generate field type info / description in getmininginfo output
* Allow compilation with `--disable-wallet`
* fix remaining references
* Drop wallet references/include in CActiveMasternode and fix other files affected by this change
* Wrap privatesend-client.h include with ifdef/endif and fix other files affected by this change
* Re-enable Travis build with no wallet
reverts 267e57877b
* Remove orphan state wipe from UnloadBlockIndex.
As orphan state is now "network state", like in
d6ea737be19a0001e69e4e854eb1cef21523ea7a,
UnloadBlockIndex is only used during init if we end up reindexing
to clear our block state so that we can start over. However, at
that time no connections have been brought up as CConnman hasn't
been started yet, so all of the network processing state logic is
empty when its called.
* Move network-msg-processing code out of main to its own file
* Rename the remaining main.{h,cpp} to validation.{h,cpp}
* Remove pfrom parameter from ProcessNewBlock
This further decouples ProcessNewBlock from networking/peer logic.
* Replace CValidationState param in ProcessNewBlock with BlockChecked
* Make validationinterface.UpdatedBlockTip more verbose
In anticipation of making all the callbacks out of block processing
flow through it. Note that vHashes will always have something in it
since pindexFork != pindexNewTip.
* Remove duplicate nBlocksEstimate cmp (we already checked IsIBD())
* Remove CConnman parameter from ProcessNewBlock/ActivateBestChain
* Remove SyncWithWallets wrapper function
* Move net-processing logic definitions together in main.h
* Use CValidationInterface from chain logic to notify peer logic
This adds a new CValidationInterface subclass, defined in main.h,
to receive notifications of UpdatedBlockTip and use that to push
blocks to peers, instead of doing it directly from
ActivateBestChain.
* Always call UpdatedBlockTip, even if blocks were only disconnected
* Use BlockChecked signal to send reject messages from mapBlockSource
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
