AboutDialog About Darkcoin Core Darkcoin Core version This is experimental software. Distributed under the MIT/X11 software license, see the accompanying file COPYING or http://www.opensource.org/licenses/mit-license.php. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) and cryptographic software written by Eric Young (eay@cryptsoft.com) and UPnP software written by Thomas Bernard. Гэта эксперыментальная праграма. Распаўсюджваецца пад праграмнай ліцэнзіяй MIT/X11, глядзі суправаджальную ліцэнзію капіявання альбо http://www.opensource.org/licenses/mit-license.php. Гэты прадукт уключае ПЗ, распрацаванае Праектам OpenSSL ужыванае ў OpenSSL Toolkit ( http://www.openssl.org/ ) і крыптаграфічныя праграмы, напісаныя Eric Young (eay@cryptsoft.com) і праграму UPnP, напісаную Thomas Bernard. Copyright Copyright The Bitcoin Core developers Распрацоўнікі Bitcoin Core The Darkcoin Core developers (%1-bit) (%1-біт) AddressBookPage Double-click to edit address or label Двайны клік для рэдагавання адрасу ці пазнакі Create a new address Стварыць новы адрас &New Новы Copy the currently selected address to the system clipboard Капіяваць пазначаны адрас у сістэмны буфер абмену &Copy Капіяваць Delete the currently selected address from the list Выдаліць абраны адрас са спісу &Delete Выдаліць Export the data in the current tab to a file Экспартаваць гэтыя звесткі у файл &Export Экспарт C&lose Зачыніць Choose the address to send coins to Выбраць адрас, куды выслаць сродкі Choose the address to receive coins with Выбраць адрас, на які атрымаць сродкі C&hoose Выбраць Sending addresses адрасы Адпраўкі Receiving addresses адрасы Прымання These are your Darkcoin addresses for sending payments. Always check the amount and the receiving address before sending coins. These are your Darkcoin addresses for receiving payments. It is recommended to use a new receiving address for each transaction. &Copy Address Капіяваць адрас Copy &Label &Edit Рэдагаваць Export Address List Comma separated file (*.csv) Коскамі падзелены файл (*.csv) Exporting Failed Экспартаванне няўдалае There was an error trying to save the address list to %1. Адбылася памылка пры спробе захавання спісу адрасоў у %1. AddressTableModel Label Пазнака Address Адрас (no label) непазначаны AskPassphraseDialog Passphrase Dialog Enter passphrase Увядзіце кодавую фразу New passphrase Новая кодавая фраза Repeat new passphrase Паўтарыце новую кодавую фразу Serves to disable the trivial sendmoney when OS account compromised. Provides no real security. For anonymization only Enter the new passphrase to the wallet. Please use a passphrase of 10 or more random characters, or eight or more words. Увядзіце новую кодавую фразу для гаманца. Калі ласка, ўжывайце пароль не меньша за 10 адвольных сімвалаў, ці болей васьмі слоў. Encrypt wallet Зашыфраваць гаманец. This operation needs your wallet passphrase to unlock the wallet. Гэтая аперацыя патрабуе кодавую фразу, каб рзблакаваць гаманец. Unlock wallet Разблакаваць гаманец This operation needs your wallet passphrase to decrypt the wallet. Гэтая аперацыя патрабуе пароль каб расшыфраваць гаманец. Decrypt wallet Рачшыфраваць гаманец Change passphrase Змяніць пароль Enter the old and new passphrase to the wallet. Увядзіце стары і новы пароль да гаманца. Confirm wallet encryption Пацвердзіце шыфраванне гаманца Warning: If you encrypt your wallet and lose your passphrase, you will LOSE ALL OF YOUR DARKCOINS! Are you sure you wish to encrypt your wallet? Ці ўпэўненыя вы, што жадаеце зашыфраваць свой гаманец? Wallet encrypted Гаманец зашыфраваны Darkcoin will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your darkcoins from being stolen by malware infecting your computer. IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet. Wallet encryption failed Шыфраванне гаманца няўдалае Wallet encryption failed due to an internal error. Your wallet was not encrypted. Шыфраванне гаманца не адбылося з-за ўнутранай памылкі. Гаманец незашыфраваны. The supplied passphrases do not match. Уведдзеныя паролі не супадаюць Wallet unlock failed Разблакаванне гаманца няўдалае The passphrase entered for the wallet decryption was incorrect. Уведзены пароль для расшыфравання гаманца памылковы Wallet decryption failed Расшыфраванне гаманца няўдалае Wallet passphrase was successfully changed. Парольная фраза гаманца паспяхова зменена. Warning: The Caps Lock key is on! Увага: Caps Lock уключаны! BitcoinGUI Darkcoin Core Wallet Гаманец Node Вузел [testnet] [testnet] &Overview Агляд Show general overview of wallet Паказвае агульныя звесткі аб гаманцы &Send Даслаць Send coins to a Darkcoin address &Receive Атрымаць Request payments (generates QR codes and darkcoin: URIs) &Transactions Транзакцыі Browse transaction history Праглядзець гісторыю транзакцый E&xit Выйсці Quit application Выйсці з праграмы &About Darkcoin Core Show information about Darkcoin About &Qt Аб Qt Show information about Qt Паказаць інфармацыю аб Qt &Options... Опцыі... Modify configuration options for Darkcoin &Show / Hide &Паказаць / Схаваць Show or hide the main Window Паказаць альбо схаваць галоўнае вакно &Encrypt Wallet... Зашыфраваць Гаманец... Encrypt the private keys that belong to your wallet Зашыфраваць прыватныя ключы, якия належаць вашаму гаманцу &Backup Wallet... Backup wallet to another location Зрабіце копію гаманца ў іншае месца &Change Passphrase... Change the passphrase used for wallet encryption Змяніць пароль шыфравання гаманца &Unlock Wallet... Unlock wallet Разблакаваць гаманец &Lock Wallet Sign &message... Падпісаць паведамленне... Sign messages with your Darkcoin addresses to prove you own them &Verify message... Verify messages to ensure they were signed with specified Darkcoin addresses &Information Show diagnostic information &Debug console Open debugging console &Network Monitor Show network monitor &Sending addresses... Show the list of used sending addresses and labels &Receiving addresses... Show the list of used receiving addresses and labels Open &URI... Адчыниць &URI... Open a darkcoin: URI or payment request &Command-line options Show the Darkcoin Core help message to get a list with possible Darkcoin command-line options &File Ф&айл &Settings Наладкі &Tools &Help Дапамога Tabs toolbar Darkcoin client %n active connection(s) to Darkcoin network Synchronizing with network... Сінхранізацыя з сецівам... Importing blocks from disk... Reindexing blocks on disk... No block source available... Processed %1 blocks of transaction history. Up to date Сінхранізавана %n hour(s) %n day(s) %n week(s) %1 and %2 %n year(s) %1 behind Catching up... Наганяем... Last received block was generated %1 ago. Transactions after this will not yet be visible. Darkcoin Error Памылка Warning Information Sent transaction Дасланыя транзакцыі Incoming transaction Прынятыя транзакцыі Date: %1 Amount: %2 Type: %3 Address: %4 Дата: %1 Колькасць: %2 Тып: %3 Адрас: %4 Wallet is encrypted and currently unlocked Гаманец зашыфраваны і зараз разблакаваны Wallet is encrypted and currently unlocked for anonimization only Wallet is encrypted and currently locked Гаманец зашыфраваны і зараз заблакаваны A fatal error occurred. Darkcoin can no longer continue safely and will quit. ClientModel Network Alert CoinControlDialog Coin Control Address Selection Quantity: Bytes: Amount: Колькасць: Priority: Fee: Low Output: After Fee: Change: (un)select all Tree mode List mode Amount Колькасць Address Адрас Darksend Rounds Date Дата Confirmations Confirmed Пацверджана Priority Copy address Капіяваць адрас Copy label Капіяваць пазнаку Copy amount Капіяваць колькасць Copy transaction ID Капіяваць ID транзакцыі Lock unspent Unlock unspent Copy quantity Copy fee Copy after fee Copy bytes Copy priority Copy low output Copy change highest higher high medium-high medium low-medium low lower lowest (%1 locked) none Dust yes no This label turns red, if the transaction size is greater than 1000 bytes. This means a fee of at least %1 per kB is required. Can vary +/- 1 byte per input. Transactions with higher priority are more likely to get included into a block. This label turns red, if the priority is smaller than "medium". This label turns red, if any recipient receives an amount smaller than %1. This means a fee of at least %1 is required. Amounts below 0.546 times the minimum relay fee are shown as dust. This label turns red, if the change is smaller than %1. (no label) непазначаны change from %1 (%2) (change) DarksendConfig Configure Darksend+ Basic Privacy High Privacy Maximum Privacy Please select an privacy level. Use 2 separate masternodes to mix funds up to 1000DRK Use 4 separate masternodes to mix funds up to 1000DRK Use 8 separate masternodes This option is the quickest and will cost about ~0.025DRK to anonymize 1000DRK This option is moderately fast and will cost about 0.05DRK to anonymize 1000DRK This is the slowest and most secure option. Using maximum anonymity will cost 0.1DRK per 1000DRK you anonymize. Darksend Configuration Darksend was successfully set to basic (%1 and 2 rounds). You can change this at any time by opening Darkcoin's configuration screen. Darksend was successfully set to high (%1 and 8 rounds). You can change this at any time by opening Darkcoin's configuration screen. Darksend was successfully set to maximum (%1 and 16 rounds). You can change this at any time by opening Darkcoin's configuration screen. EditAddressDialog Edit Address Рэдагаваць Адрас &Label Пазнака The label associated with this address list entry &Address Адрас The address associated with this address list entry. This can only be modified for sending addresses. New receiving address Новы адрас для атрымання New sending address Новы адрас для дасылання Edit receiving address Рэдагаваць адрас прымання Edit sending address Рэдагаваць адрас дасылання The entered address "%1" is not a valid Darkcoin address. The entered address "%1" is already in the address book. Уведзены адрас "%1" ужо ў кніге адрасоў Could not unlock wallet. Немагчыма разблакаваць гаманец New key generation failed. Генерацыя новага ключа няўдалая FreespaceChecker A new data directory will be created. name Directory already exists. Add %1 if you intend to create a new directory here. Path already exists, and is not a directory. Cannot create data directory here. HelpMessageDialog Darkcoin Core - Command-line options Darkcoin Core version Usage: Ужыванне: command-line options UI options Choose data directory on startup (default: 0) Set language, for example "de_DE" (default: system locale) Start minimized Set SSL root certificates for payment request (default: -system-) Show splash screen on startup (default: 1) Intro Welcome Welcome to Darkcoin Core. As this is the first time the program is launched, you can choose where Darkcoin Core will store its data. Darkcoin Core will download and store a copy of the Darkcoin block chain. At least %1GB of data will be stored in this directory, and it will grow over time. The wallet will also be stored in this directory. Use the default data directory Use a custom data directory: Darkcoin Error: Specified data directory "%1" can not be created. Error Памылка GB of free space available (of %1GB needed) OpenURIDialog Open URI Open payment request from URI or file URI: Select payment request file Select payment request file to open OptionsDialog Options Опцыі &Main Automatically start Darkcoin after logging in to the system. &Start Darkcoin on system login Size of &database cache MB Number of script &verification threads (0 = auto, <0 = leave that many cores free) <html><head/><body>This setting determines the amount of individual masternodes that an input will be anonymized through. More rounds of anonymization gives a higher degree of privacy, but also costs more in fees.</body></html> Darksend rounds to use Amount of Darkcoin to keep anonymized W&allet Optional transaction fee per kB that helps make sure your transactions are processed quickly. Most transactions are 1 kB. Pay transaction &fee Expert Whether to show coin control features or not. Enable coin &control features If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed. &Spend unconfirmed change &Network Automatically open the Darkcoin client port on the router. This only works when your router supports UPnP and it is enabled. Map port using &UPnP Connect to the Darkcoin network through a SOCKS proxy. &Connect through SOCKS proxy (default proxy): Proxy &IP: IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1) &Port: Port of the proxy (e.g. 9050) SOCKS &Version: SOCKS version of the proxy (e.g. 5) &Window Show only a tray icon after minimizing the window. &Minimize to the tray instead of the taskbar Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Quit in the menu. M&inimize on close &Display User Interface &language: The user interface language can be set here. This setting will take effect after restarting Darkcoin. &Unit to show amounts in: Choose the default subdivision unit to show in the interface and when sending coins. Whether to show Darkcoin addresses in the transaction list or not. &Display addresses in transaction list Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |. Third party transaction URLs Active command-line options that override above options: Reset all client options to default. &Reset Options &OK &Cancel default none Confirm options reset Client restart required to activate changes. Client will be shutdown, do you want to proceed? This change would require a client restart. The supplied proxy address is invalid. OverviewPage Form Форма Wallet Гаманец The displayed information may be out of date. Your wallet automatically synchronizes with the Darkcoin network after a connection is established, but this process has not completed yet. Available: Your current spendable balance Pending: Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance Immature: Mined balance that has not yet matured Total: Your current total balance Status: Enabled/Disabled Completion: Darksend Balance: 0 DRK Amount and Rounds: 0 DRK / 0 Rounds Submitted Denom: The denominations you submitted to the Masternode. To mix, other users must submit the exact same denominations. n/a Darksend Start/Stop Mixing (Last Message) Try to manually submit a Darksend request. Try Mix Reset the current status of Darksend (can interrupt Darksend if it's in the process of Mixing, which can cost you money!) Reset Recent transactions Нядаўнія транзаццыі out of sync Darksend was successfully reset. Darksend requires at least %1 to use. Wallet is locked and user declined to unlock. Disabling Darksend. PaymentServer Payment request error Cannot start darkcoin: click-to-pay handler Net manager warning Your active proxy doesn't support SOCKS5, which is required for payment requests via proxy. URI handling Payment request fetch URL is invalid: %1 URI can not be parsed! This can be caused by an invalid Darkcoin address or malformed URI parameters. Payment request file handling Payment request file can not be read or processed! This can be caused by an invalid payment request file. Unverified payment requests to custom payment scripts are unsupported. Requested payment amount of %1 is too small (considered dust). Refund from %1 Error communicating with %1: %2 Payment request can not be parsed or processed! Bad response from server %1 Network request error Payment acknowledged QObject Darkcoin Error: Specified data directory "%1" does not exist. Error: Cannot parse configuration file: %1. Only use key=value syntax. Error reading masternode configuration file: %1 Error: Invalid combination of -regtest and -testnet. Darkcoin Core didn't yet exit safely... Enter a Darkcoin address (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg) QRImageWidget &Save Image... &Copy Image Save QR Code PNG Image (*.png) RPCConsole Debug window &Information Masternode Count General Name Client name N/A Number of connections Open the Darkcoin debug log file from the current data directory. This can take a few seconds for large log files. &Open Startup time Network Last block time Debug log file Using OpenSSL version Build date Current number of blocks Client version Block chain &Console Clear console &Network Traffic &Clear Totals In: Out: Welcome to the Darkcoin RPC console. Use up and down arrows to navigate history, and Ctrl-L to clear screen. Type help for an overview of available commands. %1 B %1 KB %1 MB %1 GB %1 m %1 h %1 h %2 m ReceiveCoinsDialog Reuse one of the previously used receiving addresses. Reusing addresses has security and privacy issues. Do not use this unless re-generating a payment request made before. R&euse an existing receiving address (not recommended) An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Darkcoin network. &Message: An optional label to associate with the new receiving address. Use this form to request payments. All fields are optional. &Label: Пазнака: An optional amount to request. Leave this empty or zero to not request a specific amount. &Amount: &Request payment Clear all fields of the form. Clear Requested payments history Show the selected request (does the same as double clicking an entry) Show Remove the selected entries from the list Remove Copy label Капіяваць пазнаку Copy message Copy amount Капіяваць колькасць ReceiveRequestDialog QR Code Copy &URI Copy &Address &Save Image... Request payment to %1 Payment information URI Address Адрас Amount Колькасць Label Пазнака Message Resulting URI too long, try to reduce the text for label / message. Error encoding URI into QR Code. RecentRequestsTableModel Date Дата Label Пазнака Message Amount Колькасць (no label) непазначаны (no message) (no amount) SendCoinsDialog Send Coins Даслаць Манеты Coin Control Features Inputs... automatically selected Insufficient funds! Quantity: Bytes: Amount: Колькасць: Priority: Fee: Low Output: After Fee: Change: If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address. Custom change address Confirm the send action Пацвердзіць дасыланне S&end Clear all fields of the form. Clear &All Send to multiple recipients at once Даслаць адразу некалькім атрымальнікам Add &Recipient Darksend InstantX Balance: Баланс: Copy quantity Copy amount Капіяваць колькасць Copy fee Copy after fee Copy bytes Copy priority Copy low output Copy change (darksend requires this amount to be rounded up to the nearest %1). %1 to %2 Are you sure you want to send? are added as transaction fee Total Amount %1 (= %2) or Confirm send coins Пацвердзіць дасыланне манет Payment request expired Invalid payment address %1 The recipient address is not valid, please recheck. The amount to pay must be larger than 0. Велічыня плацяжу мае быць больш за 0. The amount exceeds your balance. The total exceeds your balance when the %1 transaction fee is included. Duplicate address found, can only send to each address once per send operation. Transaction creation failed! The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. Error: The wallet was unlocked only to anonymize coins. Warning: Invalid Darkcoin address Warning: Unknown change address (no label) непазначаны SendCoinsEntry This is a normal payment. Pay &To: Заплаціць да: The address to send the payment to (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg) Choose previously used address Alt+A Alt+A Paste address from clipboard Уставіць адрас з буферу абмена Alt+P Alt+P Remove this entry &Label: Пазнака: Enter a label for this address to add it to the list of used addresses A&mount: Колькасць: Message: A message that was attached to the darkcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Darkcoin network. This is an unverified payment request. Pay To: Memo: This is a verified payment request. Enter a label for this address to add it to your address book Увядзіце пазнаку гэтаму адрасу, каб дадаць яго ў адрасную кнігу ShutdownWindow Darkcoin Core is shutting down... Do not shut down the computer until this window disappears. SignVerifyMessageDialog Signatures - Sign / Verify a Message &Sign Message You can sign messages with your addresses to prove you own them. Be careful not to sign anything vague, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. The address to sign the message with (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg) Choose previously used address Alt+A Alt+A Paste address from clipboard Уставіць адрас з буферу абмена Alt+P Alt+P Enter the message you want to sign here Signature Copy the current signature to the system clipboard Sign the message to prove you own this Darkcoin address Sign &Message Reset all sign message fields Clear &All &Verify Message Enter the signing address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. The address the message was signed with (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg) Verify the message to ensure it was signed with the specified Darkcoin address Verify &Message Reset all verify message fields Click "Sign Message" to generate signature Enter a Darkcoin address (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg) The entered address is invalid. Please check the address and try again. The entered address does not refer to a key. Wallet unlock was cancelled. Private key for the entered address is not available. Message signing failed. Message signed. The signature could not be decoded. Please check the signature and try again. The signature did not match the message digest. Message verification failed. Message verified. SplashScreen Darkcoin Core The Bitcoin Core developers Распрацоўнікі Bitcoin Core The Darkcoin Core developers [testnet] [testnet] TrafficGraphWidget KB/s TransactionDesc Open for %n more block(s) Open until %1 conflicted %1/offline %1/unconfirmed %1/непацверджана %1 confirmations %1 пацверджанняў Status , has not been successfully broadcast yet , пакуль не было паспяхова транслявана , broadcast through %n node(s) Date Дата Source Generated From unknown невядома To own address label Credit matures in %n more block(s) not accepted Debit Transaction fee Net amount Message Comment Transaction ID ID Merchant Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours. Debug information Transaction Inputs Amount Колькасць true false TransactionDescDialog Transaction details Дэталі транзакцыі This pane shows a detailed description of the transaction Гэтая панэль паказвае дэтальнае апісанне транзакцыі TransactionTableModel Date Дата Type Тып Address Адрас Amount Колькасць Open for %n more block(s) Open until %1 Offline Unconfirmed Confirming (%1 of %2 recommended confirmations) Confirmed (%1 confirmations) Пацверджана (%1 пацверджанняў) Conflicted Immature (%1 confirmations, will be available after %2) This block was not received by any other nodes and will probably not be accepted! Гэты блок не быў прыняты іншымі вузламі і магчыма не будзе ўхвалены! Generated but not accepted Згенеравана, але не прынята Received with Прынята з Received from Прынята ад Received via Darksend Sent to Даслана да Payment to yourself Плацёж самому сабе Mined Здабыта Darksend Denominate Darksend Collateral Payment Darksend Split Up Large Inputs Darksent (n/a) (n/a) Transaction status. Hover over this field to show number of confirmations. Статус транзакцыі. Навядзіце курсар на гэтае поле, каб паказаць колькасць пацверджанняў. Date and time that the transaction was received. Дата і час, калі транзакцыя была прынята. Type of transaction. Тып транзакцыі Destination address of transaction. Адрас прызначэння транзакцыі. Amount removed from or added to balance. Колькасць аднятая ці даданая да балансу. TransactionView All Усё Today Сёння This week Гэты тыдзень This month Гэты месяц Last month Мінулы месяц This year Гэты год Range... Прамежак... Received with Прынята з Sent to Даслана да Darksent Darksend Denominate To yourself Да сябе Mined Здабыта Other Іншыя Enter address or label to search Увядзіце адрас ці пазнаку для пошуку Min amount Мін. колькасць Copy address Капіяваць адрас Copy label Капіяваць пазнаку Copy amount Капіяваць колькасць Copy transaction ID Капіяваць ID транзакцыі Edit label Рэдагаваць пазнаку Show transaction details Export Transaction History Comma separated file (*.csv) Коскамі падзелены файл (*.csv) Confirmed Пацверджана Date Дата Type Тып Label Пазнака Address Адрас Amount Колькасць ID ID Exporting Failed Экспартаванне няўдалае There was an error trying to save the transaction history to %1. Exporting Successful The transaction history was successfully saved to %1. Range: Прамежак: to да WalletFrame No wallet has been loaded. WalletModel Send Coins Даслаць Манеты WalletView &Export Экспарт Export the data in the current tab to a file Экспартаваць гэтыя звесткі у файл Backup Wallet Wallet Data (*.dat) Backup Failed There was an error trying to save the wallet data to %1. Backup Successful The wallet data was successfully saved to %1. darkcoin-core %s, you must set a rpcpassword in the configuration file: %s It is recommended you use the following random password: rpcuser=darkcoinrpc rpcpassword=%s (you do not need to remember this password) The username and password MUST NOT be the same. If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %%s | mail -s "Darkcoin Alert" admin@foo.com Acceptable ciphers (default: TLSv1.2+HIGH:TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!3DES:@STRENGTH) An error occurred while setting up the RPC port %u for listening on IPv4: %s An error occurred while setting up the RPC port %u for listening on IPv6, falling back to IPv4: %s Bind to given address and always listen on it. Use [host]:port notation for IPv6 Cannot obtain a lock on data directory %s. Darkcoin Core is probably already running. Continuously rate-limit free transactions to <n>*1000 bytes per minute (default:15) Enter regression test mode, which uses a special chain in which blocks can be solved instantly. This is intended for regression testing tools and app development. Enter regression test mode, which uses a special chain in which blocks can be solved instantly. Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds! Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message) Execute command when a wallet transaction changes (%s in cmd is replaced by TxID) Execute command when the best block changes (%s in cmd is replaced by block hash) Выканаць каманду калі лепшы блок зменіцца (%s замяняецца на хэш блока) Fees smaller than this are considered zero fee (for transaction creation) (default: Flush database activity from memory pool to disk log every <n> megabytes (default: 100) How thorough the block verification of -checkblocks is (0-4, default: 3) In this mode -genproclimit controls how many blocks are generated immediately. Listen for JSON-RPC connections on <port> (default: 9998 or testnet: 19998) Number of seconds to keep misbehaving peers from reconnecting (default: 86400) Колькасць секунд для ўстрымання асобаў да перадалучэння (заходна: 86400) Output debugging information (default: 0, supplying <category> is optional) Set maximum size of high-priority/low-fee transactions in bytes (default: %d) Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d) Set the processor limit for when generation is on (-1 = unlimited, default: -1) This is a pre-release test build - use at your own risk - do not use for mining or merchant applications Unable to bind to %s on this computer. Darkcoin Core is probably already running. Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: -proxy) Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction. Warning: Please check that your computer's date and time are correct! If your clock is wrong Darkcoin will not work properly. Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues. Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade. Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect. Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup. You must set rpcpassword=<password> in the configuration file: %s If the file does not exist, create it with owner-readable-only file permissions. (default: 1) (default: wallet.dat) <category> can be: Accept command line and JSON-RPC commands Прымаць камандны радок і JSON-RPC каманды Accept connections from outside (default: 1 if no -proxy or -connect) Add a node to connect to and attempt to keep the connection open Allow DNS lookups for -addnode, -seednode and -connect Allow JSON-RPC connections from specified IP address Дазволіць JSON-RPC злучэнні з пэўнага IP адрасу Attempt to recover private keys from a corrupt wallet.dat Darkcoin Core Daemon Darkcoin Core RPC client version Block creation options: Disable all Masternode and Darksend related functionality (0-1, default: 0) Enable instantx, show confirmations for locked transactions (bool, default: true) Enable use of automated darksend for funds stored in this wallet (0-1, default: 0) Error: Listening for incoming connections failed (listen returned error %s) Error: Wallet unlocked for anonymization only, unable to create transaction. Name to construct url for KeePass entry that stores the wallet passphrase Provide liquidity to Darksend by infrequently mixing coins on a continual basis (0-100, default: 0, 1=very frequent, high fees, 100=very infrequent, low fees) Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect) Set external address:port to get to this masternode (example: address:port) Show N confirmations for a successfully locked transaciton (0-9999, default: 1) Unable to locate enough Darksend non-denominated funds for this transaction that are not equal 1000 DRK Unable to locate enough Darksend non-denominated funds for this transaction You must specify a masternodeprivkey in the configuration. Please see documentation for help. Always query for peer addresses via DNS lookup (default: 0) Cannot downgrade wallet Cannot resolve -bind address: '%s' Cannot resolve -externalip address: '%s' Cannot write default address Clear list of wallet transactions (diagnostic tool; implies -rescan) Connect only to the specified node(s) Connect through SOCKS proxy Connect to JSON-RPC on <port> (default: 9998 or testnet: 19998) Connect to KeePassHttp on port <port> (default: 19455) Connect to a node to retrieve peer addresses, and disconnect Connection options: Corrupted block database detected Darksend options: Debugging/Testing options: Disable safemode, override a real safe mode event (default: 0) Discover own IP address (default: 1 when listening and no -externalip) Do not load the wallet and disable wallet RPC calls Do you want to rebuild the block database now? Done loading Загрузка выканана Enable the client to act as a masternode (0-1, default: 0) Error initializing block database Error initializing wallet database environment %s! Error loading block database Error loading wallet.dat Памылка загрузкі wallet.dat Error loading wallet.dat: Wallet corrupted Памылка загрузкі wallet.dat: гаманец пашкоджаны Error loading wallet.dat: Wallet requires newer version of Darkcoin Error opening block database Error reading from database, shutting down. Error Памылка Error: Disk space is low! Error: Wallet locked, unable to create transaction! Error: You already have pending entries in the Darksend pool Error: system error: Failed to listen on any port. Use -listen=0 if you want this. Failed to read block info Failed to read block Failed to sync block index Failed to write block index Failed to write block info Failed to write block Failed to write file info Failed to write to coin database Failed to write transaction index Failed to write undo data Fee per kB to add to transactions you send Fees smaller than this are considered zero fee (for relaying) (default: RPC SSL options: (see the Darkcoin Wiki for SSL setup instructions) SSL options: (see the Darkcoin Wiki for SSL setup instructions) Unable to bind to %s on this computer (bind returned error %s) Unable to locate enough Darksend denominated funds for this transaction Unable to sign masternode payment winner, wrong key? Force safe mode (default: 0) Generate coins (default: 0) Get help for a command Атрымаць дапамогу для каманды How many blocks to check at startup (default: 288, 0 = all) If <category> is not supplied, output all debugging information. Ignore masternodes less than version (example: 70050; default : 0) Importing... Imports blocks from external blk000??.dat file Incorrect or no genesis block found. Wrong datadir for network? Information Initialization sanity check failed. Darkcoin Core is shutting down. InstantX options: Insufficient funds Недастаткова сродкаў Invalid -onion address: '%s' Invalid -proxy address: '%s' Invalid amount for -minrelaytxfee=<amount>: '%s' Invalid amount for -mintxfee=<amount>: '%s' Invalid amount for -paytxfee=<amount>: '%s' Invalid amount Памылковая колькасць Invalid masternodeprivkey. Please see documenation. KeePassHttp id for the established association KeePassHttp key for AES encrypted communication with KeePass Keep N darkcoin anonymized (default: 0) Keep at most <n> unconnectable blocks in memory (default: %u) Keep at most <n> unconnectable transactions in memory (default: %u) Limit size of signature cache to <n> entries (default: 50000) List commands Спіс каманд Listen for connections on <port> (default: 9999 or testnet: 19999) Loading addresses... Загружаем адрасы... Loading block index... Загружаем індэкс блокаў... Loading wallet... (%3.2f %%) Loading wallet... Загружаем гаманец... Log transaction priority and fee per kB when mining blocks (default: 0) Maintain a full transaction index (default: 0) Maintain at most <n> connections to peers (default: 125) Трымаць не больш за <n> злучэнняў на асобу (зыходна: 125) Masternode options: Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000) Maximum per-connection send buffer, <n>*1000 bytes (default: 1000) Not enough file descriptors available. Only accept block chain matching built-in checkpoints (default: 1) Only connect to nodes in network <net> (IPv4, IPv6 or Tor) Options: Опцыі: Password for JSON-RPC connections Пароль для JSON-RPC злучэнняў Prepend debug output with timestamp (default: 1) Print block on startup, if found in block index Print block tree on startup (default: 0) RPC client options: RPC server options: Randomly drop 1 of every <n> network messages Randomly fuzz 1 of every <n> network messages Rebuild block chain index from current blk000??.dat files Rescan the block chain for missing wallet transactions Перасканаваць ланцуг блокаў дзеля пошуку адсутных транзакцый Rescanning... Перасканаванне... Run a thread to flush wallet periodically (default: 1) Run in the background as a daemon and accept commands Запусціць у фоне як дэман і прымаць каманды Select SOCKS version for -proxy (4 or 5, default: 5) Send command to Darkcoin Core Send commands to node running on <ip> (default: 127.0.0.1) Адпраўляць каманды вузлу на <ip> (зыходна: 127.0.0.1) Send trace/debug info to console instead of debug.log file Слаць trace/debug звесткі ў кансоль замест файла debug.log Server certificate file (default: server.cert) Файл-сертыфікат сервера (зыходна: server.cert) Server private key (default: server.pem) Прыватны ключ сервера (зыходна: server.pem) Set database cache size in megabytes (%d to %d, default: %d) Set key pool size to <n> (default: 100) Устанавіць памер фонда ключоў у <n> (тыпова: 100) Set maximum block size in bytes (default: %d) Set minimum block size in bytes (default: 0) Set the masternode private key Set the number of threads to service RPC calls (default: 4) Sets the DB_PRIVATE flag in the wallet db environment (default: 1) Show all debugging options (usage: --help -help-debug) Show benchmark information (default: 0) Shrink debug.log file on client startup (default: 1 when no -debug) Signing transaction failed Specify configuration file (default: darkcoin.conf) Specify connection timeout in milliseconds (default: 5000) Specify data directory Вызначыць каталог даных Specify masternode configuration file (default: masternode.conf) Specify pid file (default: darkcoind.pid) Specify wallet file (within data directory) Specify your own public address Spend unconfirmed change when sending transactions (default: 1) Start Darkcoin Core Daemon System error: This help message This is intended for regression testing tools and app development. Threshold for disconnecting misbehaving peers (default: 100) Парог для адлучэння злаўмысных карыстальнікаў (тыпова: 100) To use the %s option Transaction amount too small Transaction amounts must be positive Transaction too large Unknown -socks proxy version requested: %i Unknown network specified in -onlynet: '%s' Upgrade wallet to latest format Абнавіць гаманец на новы фармат Usage (deprecated, use darkcoin-cli): Usage: Ужыванне: Use KeePass 2 integration using KeePassHttp plugin (default: 0) Use N separate masternodes to anonymize funds (2-8, default: 2) Use OpenSSL (https) for JSON-RPC connections Ужываць OpenSSL (https) для JSON-RPC злучэнняў Use UPnP to map the listening port (default: 0) Use UPnP to map the listening port (default: 1 when listening) Use the test network Ужываць тэставае сеціва Username for JSON-RPC connections Імя карыстальника для JSON-RPC злучэнняў Verifying blocks... Verifying wallet... Wait for RPC server to start Wallet %s resides outside data directory %s Wallet needed to be rewritten: restart Darkcoin to complete Wallet options: Warning Warning: Deprecated argument -debugnet ignored, use -debug=net Warning: This version is obsolete, upgrade required! You need to rebuild the database using -reindex to change -txindex Zapping all transactions from wallet... on startup version wallet.dat corrupt, salvage failed