AboutDialog
About Dash Core
About Dash Core
<b>Dash Core</b> version
<b>Dash Core</b> version
Copyright © 2009-2014 The Bitcoin Core developers.
Copyright © 2014-YYYY The Dash Core developers.
This is experimental software.
Distributed under the MIT/X11 software license, see the accompanying file COPYING or http://www.opensource.org/licenses/mit-license.php.
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) and cryptographic software written by Eric Young (eay@cryptsoft.com) and UPnP software written by Thomas Bernard.
This is experimental software.
Distributed under the MIT/X11 software license, see the accompanying file COPYING or http://www.opensource.org/licenses/mit-license.php.
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) and cryptographic software written by Eric Young (eay@cryptsoft.com) and UPnP software written by Thomas Bernard.
Copyright
Copyright
The Bitcoin Core developers
The Bitcoin Core developers
The Dash Core developers
The Dash Core developers
(%1-bit)
(%1-bit)
AddressBookPage
Double-click to edit address or label
Double-click to edit address or label
Create a new address
Create a new address
&New
&New
Copy the currently selected address to the system clipboard
Copy the currently selected address to the system clipboard
&Copy
&Copy
Delete the currently selected address from the list
Delete the currently selected address from the list
&Delete
&Delete
Export the data in the current tab to a file
Export the data in the current tab to a file
&Export
&Export
C&lose
C&lose
Choose the address to send coins to
Choose the address to send coins to
Choose the address to receive coins with
Choose the address to receive coins with
C&hoose
C&hoose
Sending addresses
Sending addresses
Receiving addresses
Receiving addresses
These are your Dash addresses for sending payments. Always check the amount and the receiving address before sending coins.
These are your Dash addresses for sending payments. Always check the amount and the receiving address before sending coins.
These are your Dash addresses for receiving payments. It is recommended to use a new receiving address for each transaction.
These are your Dash addresses for receiving payments. It is recommended to use a new receiving address for each transaction.
&Copy Address
&Copy Address
Copy &Label
Copy &Label
&Edit
&Edit
Export Address List
Export Address List
Comma separated file (*.csv)
Comma separated file (*.csv)
Exporting Failed
Exporting Failed
There was an error trying to save the address list to %1.
There was an error trying to save the address list to %1.
AddressTableModel
Label
Label
Address
Address
(no label)
(no label)
AskPassphraseDialog
Passphrase Dialog
Passphrase Dialog
Enter passphrase
Enter passphrase
New passphrase
New passphrase
Repeat new passphrase
Repeat new passphrase
Serves to disable the trivial sendmoney when OS account compromised. Provides no real security.
Serves to disable the trivial sendmoney when OS account compromised. Provides no real security.
For anonymization only
For anonymization only
Enter the new passphrase to the wallet.<br/>Please use a passphrase of <b>10 or more random characters</b>, or <b>eight or more words</b>.
Enter the new passphrase to the wallet.<br/>Please use a passphrase of <b>10 or more random characters</b>, or <b>eight or more words</b>.
Encrypt wallet
Encrypt wallet
This operation needs your wallet passphrase to unlock the wallet.
This operation needs your wallet passphrase to unlock the wallet.
Unlock wallet
Unlock wallet
This operation needs your wallet passphrase to decrypt the wallet.
This operation needs your wallet passphrase to decrypt the wallet.
Decrypt wallet
Decrypt wallet
Change passphrase
Change passphrase
Enter the old and new passphrase to the wallet.
Enter the old and new passphrase to the wallet.
Confirm wallet encryption
Confirm wallet encryption
Warning: If you encrypt your wallet and lose your passphrase, you will <b>LOSE ALL OF YOUR DARKCOINS</b>!
Warning: If you encrypt your wallet and lose your passphrase, you will <b>LOSE ALL OF YOUR DARKCOINS</b>!
Are you sure you wish to encrypt your wallet?
Are you sure you wish to encrypt your wallet?
Wallet encrypted
Wallet encrypted
Dash will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your darkcoins from being stolen by malware infecting your computer.
Dash will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your darkcoins from being stolen by malware infecting your computer.
IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet.
IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet.
Wallet encryption failed
Wallet encryption failed
Wallet encryption failed due to an internal error. Your wallet was not encrypted.
Wallet encryption failed due to an internal error. Your wallet was not encrypted.
The supplied passphrases do not match.
The supplied passphrases do not match.
Wallet unlock failed
Wallet unlock failed
The passphrase entered for the wallet decryption was incorrect.
The passphrase entered for the wallet decryption was incorrect.
Wallet decryption failed
Wallet decryption failed
Wallet passphrase was successfully changed.
Wallet passphrase was successfully changed.
Warning: The Caps Lock key is on!
Warning: The Caps Lock key is on!
BitcoinGUI
Dash Core
Dash Core
Wallet
Wallet
Node
Node
[testnet]
[testnet]
&Overview
&Overview
Show general overview of wallet
Show general overview of wallet
&Send
&Send
Send coins to a Dash address
Send coins to a Dash address
&Receive
&Receive
Request payments (generates QR codes and darkcoin: URIs)
Request payments (generates QR codes and darkcoin: URIs)
&Transactions
&Transactions
Browse transaction history
Browse transaction history
E&xit
E&xit
Quit application
Quit application
&About Dash Core
&About Dash Core
Show information about Dash
Show information about Dash
About &Qt
About &Qt
Show information about Qt
Show information about Qt
&Options...
&Options...
Modify configuration options for Dash
Modify configuration options for Dash
&Show / Hide
&Show / Hide
Show or hide the main Window
Show or hide the main Window
&Encrypt Wallet...
&Encrypt Wallet...
Encrypt the private keys that belong to your wallet
Encrypt the private keys that belong to your wallet
&Backup Wallet...
&Backup Wallet...
Backup wallet to another location
Backup wallet to another location
&Change Passphrase...
&Change Passphrase...
Change the passphrase used for wallet encryption
Change the passphrase used for wallet encryption
&Unlock Wallet...
&Unlock Wallet...
Unlock wallet
Unlock wallet
&Lock Wallet
&Lock Wallet
Sign &message...
Sign &message...
Sign messages with your Dash addresses to prove you own them
Sign messages with your Dash addresses to prove you own them
&Verify message...
&Verify message...
Verify messages to ensure they were signed with specified Dash addresses
Verify messages to ensure they were signed with specified Dash addresses
&Information
&Information
Show diagnostic information
Show diagnostic information
&Debug console
&Debug console
Open debugging console
Open debugging console
&Network Monitor
&Network Monitor
Show network monitor
Show network monitor
Open &Configuration File
Open configuration file
&Sending addresses...
&Sending addresses...
Show the list of used sending addresses and labels
Show the list of used sending addresses and labels
&Receiving addresses...
&Receiving addresses...
Show the list of used receiving addresses and labels
Show the list of used receiving addresses and labels
Open &URI...
Open &URI...
Open a darkcoin: URI or payment request
Open a darkcoin: URI or payment request
&Command-line options
&Command-line options
Show the Dash Core help message to get a list with possible Dash command-line options
Show the Dash Core help message to get a list with possible Dash command-line options
&File
&File
&Settings
&Settings
&Tools
&Tools
&Help
&Help
Tabs toolbar
Tabs toolbar
Dash client
Dash client
%n active connection(s) to Dash network
%n active connection(s) to Dash network
%n active connection(s) to Dash network
Synchronizing with network...
Synchronizing with network...
Importing blocks from disk...
Importing blocks from disk...
Reindexing blocks on disk...
Reindexing blocks on disk...
No block source available...
No block source available...
Processed %1 blocks of transaction history.
Processed %1 blocks of transaction history.
Up to date
Up to date
%n hour(s)
%n hour(s)
%n hour(s)
%n day(s)
%n day(s)
%n day(s)
%n week(s)
%n week(s)
%n week(s)
%1 and %2
%1 and %2
%n year(s)
%n year(s)
%n year(s)
%1 behind
%1 behind
Catching up...
Catching up...
Last received block was generated %1 ago.
Last received block was generated %1 ago.
Transactions after this will not yet be visible.
Transactions after this will not yet be visible.
Dash
Dash
Error
Error
Warning
Warning
Information
Information
Sent transaction
Sent transaction
Incoming transaction
Incoming transaction
Date: %1
Amount: %2
Type: %3
Address: %4
Date: %1
Amount: %2
Type: %3
Address: %4
Wallet is <b>encrypted</b> and currently <b>unlocked</b>
Wallet is <b>encrypted</b> and currently <b>unlocked</b>
Wallet is <b>encrypted</b> and currently <b>unlocked</b> for anonimization only
Wallet is <b>encrypted</b> and currently <b>unlocked</b> for anonimization only
Wallet is <b>encrypted</b> and currently <b>locked</b>
Wallet is <b>encrypted</b> and currently <b>locked</b>
A fatal error occurred. Dash can no longer continue safely and will quit.
A fatal error occurred. Dash can no longer continue safely and will quit.
ClientModel
Network Alert
Network Alert
CoinControlDialog
Coin Control Address Selection
Coin Control Address Selection
Quantity:
Quantity:
Bytes:
Bytes:
Amount:
Amount:
Priority:
Priority:
Fee:
Fee:
Low Output:
Low Output:
After Fee:
After Fee:
Change:
Change:
(un)select all
(un)select all
Tree mode
Tree mode
List mode
List mode
(1 locked)
Amount
Amount
Label
Label
Address
Address
Darksend Rounds
Darksend Rounds
Date
Date
Confirmations
Confirmations
Confirmed
Confirmed
Priority
Priority
Copy address
Copy address
Copy label
Copy label
Copy amount
Copy amount
Copy transaction ID
Copy transaction ID
Lock unspent
Lock unspent
Unlock unspent
Unlock unspent
Copy quantity
Copy quantity
Copy fee
Copy fee
Copy after fee
Copy after fee
Copy bytes
Copy bytes
Copy priority
Copy priority
Copy low output
Copy low output
Copy change
Copy change
highest
highest
higher
higher
high
high
medium-high
medium-high
n/a
n/a
medium
medium
low-medium
low-medium
low
low
lower
lower
lowest
lowest
(%1 locked)
(%1 locked)
none
none
Dust
Dust
yes
yes
no
no
This label turns red, if the transaction size is greater than 1000 bytes.
This label turns red, if the transaction size is greater than 1000 bytes.
This means a fee of at least %1 per kB is required.
This means a fee of at least %1 per kB is required.
Can vary +/- 1 byte per input.
Can vary +/- 1 byte per input.
Transactions with higher priority are more likely to get included into a block.
Transactions with higher priority are more likely to get included into a block.
This label turns red, if the priority is smaller than "medium".
This label turns red, if the priority is smaller than "medium".
This label turns red, if any recipient receives an amount smaller than %1.
This label turns red, if any recipient receives an amount smaller than %1.
This means a fee of at least %1 is required.
This means a fee of at least %1 is required.
Amounts below 0.546 times the minimum relay fee are shown as dust.
Amounts below 0.546 times the minimum relay fee are shown as dust.
This label turns red, if the change is smaller than %1.
This label turns red, if the change is smaller than %1.
(no label)
(no label)
change from %1 (%2)
change from %1 (%2)
(change)
(change)
DarksendConfig
Configure Darksend
Configure Darksend
Basic Privacy
Basic Privacy
High Privacy
High Privacy
Maximum Privacy
Maximum Privacy
Please select a privacy level.
Please select a privacy level.
Use 2 separate masternodes to mix funds up to 1000 DASH
Use 2 separate masternodes to mix funds up to 1000 DASH
Use 8 separate masternodes to mix funds up to 1000 DASH
Use 8 separate masternodes to mix funds up to 1000 DASH
Use 16 separate masternodes
Use 16 separate masternodes
This option is the quickest and will cost about ~0.025 DASH to anonymize 1000 DASH
This option is the quickest and will cost about ~0.025 DASH to anonymize 1000 DASH
This option is moderately fast and will cost about 0.05 DASH to anonymize 1000 DASH
This option is moderately fast and will cost about 0.05 DASH to anonymize 1000 DASH
0.1 DASH per 1000 DASH you anonymize.
0.1 DASH per 1000 DASH you anonymize.
This is the slowest and most secure option. Using maximum anonymity will cost
This is the slowest and most secure option. Using maximum anonymity will cost
Darksend Configuration
Darksend Configuration
Darksend was successfully set to basic (%1 and 2 rounds). You can change this at any time by opening Dash's configuration screen.
Darksend was successfully set to basic (%1 and 2 rounds). You can change this at any time by opening Dash's configuration screen.
Darksend was successfully set to high (%1 and 8 rounds). You can change this at any time by opening Dash's configuration screen.
Darksend was successfully set to high (%1 and 8 rounds). You can change this at any time by opening Dash's configuration screen.
Darksend was successfully set to maximum (%1 and 16 rounds). You can change this at any time by opening Dash's configuration screen.
Darksend was successfully set to maximum (%1 and 16 rounds). You can change this at any time by opening Dash's configuration screen.
EditAddressDialog
Edit Address
Edit Address
&Label
&Label
The label associated with this address list entry
The label associated with this address list entry
&Address
&Address
The address associated with this address list entry. This can only be modified for sending addresses.
The address associated with this address list entry. This can only be modified for sending addresses.
New receiving address
New receiving address
New sending address
New sending address
Edit receiving address
Edit receiving address
Edit sending address
Edit sending address
The entered address "%1" is not a valid Dash address.
The entered address "%1" is not a valid Dash address.
The entered address "%1" is already in the address book.
The entered address "%1" is already in the address book.
Could not unlock wallet.
Could not unlock wallet.
New key generation failed.
New key generation failed.
FreespaceChecker
A new data directory will be created.
A new data directory will be created.
name
name
Directory already exists. Add %1 if you intend to create a new directory here.
Directory already exists. Add %1 if you intend to create a new directory here.
Path already exists, and is not a directory.
Path already exists, and is not a directory.
Cannot create data directory here.
Cannot create data directory here.
HelpMessageDialog
Dash Core - Command-line options
Dash Core - Command-line options
Dash Core
Dash Core
version
version
Usage:
Usage:
command-line options
command-line options
UI options
UI options
Choose data directory on startup (default: 0)
Choose data directory on startup (default: 0)
Set language, for example "de_DE" (default: system locale)
Set language, for example "de_DE" (default: system locale)
Start minimized
Start minimized
Set SSL root certificates for payment request (default: -system-)
Set SSL root certificates for payment request (default: -system-)
Show splash screen on startup (default: 1)
Show splash screen on startup (default: 1)
Intro
Welcome
Welcome
Welcome to Dash Core.
Welcome to Dash Core.
As this is the first time the program is launched, you can choose where Dash Core will store its data.
As this is the first time the program is launched, you can choose where Dash Core will store its data.
Dash Core will download and store a copy of the Dash block chain. At least %1GB of data will be stored in this directory, and it will grow over time. The wallet will also be stored in this directory.
Dash Core will download and store a copy of the Dash block chain. At least %1GB of data will be stored in this directory, and it will grow over time. The wallet will also be stored in this directory.
Use the default data directory
Use the default data directory
Use a custom data directory:
Use a custom data directory:
Dash
Dash
Error: Specified data directory "%1" can not be created.
Error: Specified data directory "%1" can not be created.
Error
Error
GB of free space available
GB of free space available
(of %1GB needed)
(of %1GB needed)
OpenURIDialog
Open URI
Open URI
Open payment request from URI or file
Open payment request from URI or file
URI:
URI:
Select payment request file
Select payment request file
Select payment request file to open
Select payment request file to open
OptionsDialog
Options
Options
&Main
&Main
Automatically start Dash after logging in to the system.
Automatically start Dash after logging in to the system.
&Start Dash on system login
&Start Dash on system login
Size of &database cache
Size of &database cache
MB
MB
Number of script &verification threads
Number of script &verification threads
(0 = auto, <0 = leave that many cores free)
(0 = auto, <0 = leave that many cores free)
<html><head/><body><p>This setting determines the amount of individual masternodes that an input will be anonymized through. More rounds of anonymization gives a higher degree of privacy, but also costs more in fees.</p></body></html>
<html><head/><body><p>This setting determines the amount of individual masternodes that an input will be anonymized through. More rounds of anonymization gives a higher degree of privacy, but also costs more in fees.</p></body></html>
Darksend rounds to use
Darksend rounds to use
This amount acts as a threshold to turn off Darksend once it's reached.
Amount of Dash to keep anonymized
Amount of Dash to keep anonymized
W&allet
W&allet
Optional transaction fee per kB that helps make sure your transactions are processed quickly. Most transactions are 1 kB.
Optional transaction fee per kB that helps make sure your transactions are processed quickly. Most transactions are 1 kB.
Pay transaction &fee
Pay transaction &fee
Expert
Expert
Whether to show coin control features or not.
Whether to show coin control features or not.
Enable coin &control features
Enable coin &control features
If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed.
If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed.
&Spend unconfirmed change
&Spend unconfirmed change
&Network
&Network
Automatically open the Dash client port on the router. This only works when your router supports UPnP and it is enabled.
Automatically open the Dash client port on the router. This only works when your router supports UPnP and it is enabled.
Map port using &UPnP
Map port using &UPnP
Connect to the Dash network through a SOCKS proxy.
Connect to the Dash network through a SOCKS proxy.
&Connect through SOCKS proxy (default proxy):
&Connect through SOCKS proxy (default proxy):
Proxy &IP:
Proxy &IP:
IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1)
IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1)
&Port:
&Port:
Port of the proxy (e.g. 9050)
Port of the proxy (e.g. 9050)
SOCKS &Version:
SOCKS &Version:
SOCKS version of the proxy (e.g. 5)
SOCKS version of the proxy (e.g. 5)
&Window
&Window
Show only a tray icon after minimizing the window.
Show only a tray icon after minimizing the window.
&Minimize to the tray instead of the taskbar
&Minimize to the tray instead of the taskbar
Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Quit in the menu.
Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Quit in the menu.
M&inimize on close
M&inimize on close
&Display
&Display
User Interface &language:
User Interface &language:
The user interface language can be set here. This setting will take effect after restarting Dash.
The user interface language can be set here. This setting will take effect after restarting Dash.
Language missing or translation incomplete? Help contributing translations here:
https://www.transifex.com/projects/p/darkcoin/
&Unit to show amounts in:
&Unit to show amounts in:
Choose the default subdivision unit to show in the interface and when sending coins.
Choose the default subdivision unit to show in the interface and when sending coins.
Whether to show Dash addresses in the transaction list or not.
Whether to show Dash addresses in the transaction list or not.
&Display addresses in transaction list
&Display addresses in transaction list
Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |.
Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |.
Third party transaction URLs
Third party transaction URLs
Active command-line options that override above options:
Active command-line options that override above options:
Reset all client options to default.
Reset all client options to default.
&Reset Options
&Reset Options
&OK
&OK
&Cancel
&Cancel
default
default
none
none
Confirm options reset
Confirm options reset
Client restart required to activate changes.
Client restart required to activate changes.
Client will be shutdown, do you want to proceed?
Client will be shutdown, do you want to proceed?
This change would require a client restart.
This change would require a client restart.
The supplied proxy address is invalid.
The supplied proxy address is invalid.
OverviewPage
Form
Form
Wallet
Wallet
The displayed information may be out of date. Your wallet automatically synchronizes with the Dash network after a connection is established, but this process has not completed yet.
The displayed information may be out of date. Your wallet automatically synchronizes with the Dash network after a connection is established, but this process has not completed yet.
Available:
Available:
Your current spendable balance
Your current spendable balance
Pending:
Pending:
Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance
Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance
Immature:
Immature:
Mined balance that has not yet matured
Mined balance that has not yet matured
Total:
Total:
Your current total balance
Your current total balance
Status:
Status:
Enabled/Disabled
Enabled/Disabled
Completion:
Completion:
Darksend Balance:
Darksend Balance:
0 DASH
0 DASH
Amount and Rounds:
Amount and Rounds:
0 DASH / 0 Rounds
0 DASH / 0 Rounds
Submitted Denom:
Submitted Denom:
The denominations you submitted to the Masternode. To mix, other users must submit the exact same denominations.
The denominations you submitted to the Masternode. To mix, other users must submit the exact same denominations.
n/a
n/a
Darksend
Darksend
Start/Stop Mixing
Start/Stop Mixing
(Last Message)
(Last Message)
Try to manually submit a Darksend request.
Try to manually submit a Darksend request.
Try Mix
Try Mix
Reset the current status of Darksend (can interrupt Darksend if it's in the process of Mixing, which can cost you money!)
Reset the current status of Darksend (can interrupt Darksend if it's in the process of Mixing, which can cost you money!)
Reset
Reset
<b>Recent transactions</b>
<b>Recent transactions</b>
out of sync
out of sync
Disabled
Disabled
Start Darksend Mixing
Start Darksend Mixing
Stop Darksend Mixing
Stop Darksend Mixing
No inputs detected
No inputs detected
Found unconfirmed denominated outputs, will wait till they confirm to recalculate.
Found unconfirmed denominated outputs, will wait till they confirm to recalculate.
Rounds
Rounds
Enabled
Enabled
Last Darksend message:
Last Darksend message:
Darksend is idle.
Darksend is idle.
Mixing in progress...
Darksend request complete: Your transaction was accepted into the pool!
Darksend request complete: Your transaction was accepted into the pool!
Submitted following entries to masternode:
Submitted following entries to masternode:
Submitted to masternode, Waiting for more entries
Submitted to masternode, Waiting for more entries
Found enough users, signing ...
Found enough users, signing ...
Found enough users, signing ( waiting. )
Found enough users, signing ( waiting. )
Found enough users, signing ( waiting.. )
Found enough users, signing ( waiting.. )
Found enough users, signing ( waiting... )
Found enough users, signing ( waiting... )
Transmitting final transaction.
Transmitting final transaction.
Finalizing transaction.
Finalizing transaction.
Darksend request incomplete:
Darksend request incomplete:
Will retry...
Will retry...
Darksend request complete:
Darksend request complete:
Submitted to masternode, waiting in queue .
Submitted to masternode, waiting in queue .
Submitted to masternode, waiting in queue ..
Submitted to masternode, waiting in queue ..
Submitted to masternode, waiting in queue ...
Submitted to masternode, waiting in queue ...
Unknown state:
Unknown state:
N/A
N/A
Darksend was successfully reset.
Darksend was successfully reset.
Darksend requires at least %1 to use.
Darksend requires at least %1 to use.
Wallet is locked and user declined to unlock. Disabling Darksend.
Wallet is locked and user declined to unlock. Disabling Darksend.
PaymentServer
Payment request error
Payment request error
Cannot start darkcoin: click-to-pay handler
Cannot start darkcoin: click-to-pay handler
Net manager warning
Net manager warning
Your active proxy doesn't support SOCKS5, which is required for payment requests via proxy.
Your active proxy doesn't support SOCKS5, which is required for payment requests via proxy.
URI handling
URI handling
Payment request fetch URL is invalid: %1
Payment request fetch URL is invalid: %1
URI can not be parsed! This can be caused by an invalid Dash address or malformed URI parameters.
URI can not be parsed! This can be caused by an invalid Dash address or malformed URI parameters.
Payment request file handling
Payment request file handling
Payment request file can not be read or processed! This can be caused by an invalid payment request file.
Payment request file can not be read or processed! This can be caused by an invalid payment request file.
Unverified payment requests to custom payment scripts are unsupported.
Unverified payment requests to custom payment scripts are unsupported.
Requested payment amount of %1 is too small (considered dust).
Requested payment amount of %1 is too small (considered dust).
Refund from %1
Refund from %1
Error communicating with %1: %2
Error communicating with %1: %2
Payment request can not be parsed or processed!
Payment request can not be parsed or processed!
Bad response from server %1
Bad response from server %1
Network request error
Network request error
Payment acknowledged
Payment acknowledged
QObject
Dash
Dash
Error: Specified data directory "%1" does not exist.
Error: Specified data directory "%1" does not exist.
Error: Cannot parse configuration file: %1. Only use key=value syntax.
Error: Cannot parse configuration file: %1. Only use key=value syntax.
Error reading masternode configuration file: %1
Error reading masternode configuration file: %1
Error: Invalid combination of -regtest and -testnet.
Error: Invalid combination of -regtest and -testnet.
Dash Core didn't yet exit safely...
Dash Core didn't yet exit safely...
Enter a Dash address (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg)
Enter a Dash address (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg)
QRImageWidget
&Save Image...
&Save Image...
&Copy Image
&Copy Image
Save QR Code
Save QR Code
PNG Image (*.png)
PNG Image (*.png)
RPCConsole
Tools window
Tools window
&Information
&Information
Masternode Count
Masternode Count
General
General
Name
Name
Client name
Client name
N/A
N/A
Number of connections
Number of connections
Open the Dash debug log file from the current data directory. This can take a few seconds for large log files.
Open the Dash debug log file from the current data directory. This can take a few seconds for large log files.
&Open
&Open
Startup time
Startup time
Network
Network
Last block time
Last block time
Debug log file
Debug log file
Using OpenSSL version
Using OpenSSL version
Build date
Build date
Current number of blocks
Current number of blocks
Client version
Client version
Block chain
Block chain
&Console
&Console
Clear console
Clear console
&Network Traffic
&Network Traffic
&Clear
&Clear
Totals
Totals
In:
In:
Out:
Out:
Welcome to the Dash RPC console.
Welcome to the Dash RPC console.
Use up and down arrows to navigate history, and <b>Ctrl-L</b> to clear screen.
Use up and down arrows to navigate history, and <b>Ctrl-L</b> to clear screen.
Type <b>help</b> for an overview of available commands.
Type <b>help</b> for an overview of available commands.
%1 B
%1 B
%1 KB
%1 KB
%1 MB
%1 MB
%1 GB
%1 GB
%1 m
%1 m
%1 h
%1 h
%1 h %2 m
%1 h %2 m
ReceiveCoinsDialog
Reuse one of the previously used receiving addresses. Reusing addresses has security and privacy issues. Do not use this unless re-generating a payment request made before.
Reuse one of the previously used receiving addresses. Reusing addresses has security and privacy issues. Do not use this unless re-generating a payment request made before.
R&euse an existing receiving address (not recommended)
R&euse an existing receiving address (not recommended)
An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Dash network.
An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Dash network.
&Message:
&Message:
An optional label to associate with the new receiving address.
An optional label to associate with the new receiving address.
Use this form to request payments. All fields are <b>optional</b>.
Use this form to request payments. All fields are <b>optional</b>.
&Label:
&Label:
An optional amount to request. Leave this empty or zero to not request a specific amount.
An optional amount to request. Leave this empty or zero to not request a specific amount.
&Amount:
&Amount:
&Request payment
&Request payment
Clear all fields of the form.
Clear all fields of the form.
Clear
Clear
Requested payments history
Requested payments history
Show the selected request (does the same as double clicking an entry)
Show the selected request (does the same as double clicking an entry)
Show
Show
Remove the selected entries from the list
Remove the selected entries from the list
Remove
Remove
Copy label
Copy label
Copy message
Copy message
Copy amount
Copy amount
ReceiveRequestDialog
QR Code
QR Code
Copy &URI
Copy &URI
Copy &Address
Copy &Address
&Save Image...
&Save Image...
Request payment to %1
Request payment to %1
Payment information
Payment information
URI
URI
Address
Address
Amount
Amount
Label
Label
Message
Message
Resulting URI too long, try to reduce the text for label / message.
Resulting URI too long, try to reduce the text for label / message.
Error encoding URI into QR Code.
Error encoding URI into QR Code.
RecentRequestsTableModel
Date
Date
Label
Label
Message
Message
Amount
Amount
(no label)
(no label)
(no message)
(no message)
(no amount)
(no amount)
SendCoinsDialog
Send Coins
Send Coins
Coin Control Features
Coin Control Features
Inputs...
Inputs...
automatically selected
automatically selected
Insufficient funds!
Insufficient funds!
Quantity:
Quantity:
Bytes:
Bytes:
Amount:
Amount:
Priority:
Priority:
medium
medium
Fee:
Fee:
Low Output:
Low Output:
no
no
After Fee:
After Fee:
Change:
Change:
If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address.
If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address.
Custom change address
Custom change address
Confirm the send action
Confirm the send action
S&end
S&end
Clear all fields of the form.
Clear all fields of the form.
Clear &All
Clear &All
Send to multiple recipients at once
Send to multiple recipients at once
Add &Recipient
Add &Recipient
Darksend
Darksend
InstantX
InstantX
Balance:
Balance:
Copy quantity
Copy quantity
Copy amount
Copy amount
Copy fee
Copy fee
Copy after fee
Copy after fee
Copy bytes
Copy bytes
Copy priority
Copy priority
Copy low output
Copy low output
Copy change
Copy change
using
anonymous funds
(darksend requires this amount to be rounded up to the nearest %1).
(darksend requires this amount to be rounded up to the nearest %1).
any available funds (not recommended)
and InstantX
%1 to %2
%1 to %2
Are you sure you want to send?
Are you sure you want to send?
are added as transaction fee
are added as transaction fee
Total Amount %1 (= %2)
Total Amount %1 (= %2)
or
or
Confirm send coins
Confirm send coins
Payment request expired
Payment request expired
Invalid payment address %1
Invalid payment address %1
The recipient address is not valid, please recheck.
The recipient address is not valid, please recheck.
The amount to pay must be larger than 0.
The amount to pay must be larger than 0.
The amount exceeds your balance.
The amount exceeds your balance.
The total exceeds your balance when the %1 transaction fee is included.
The total exceeds your balance when the %1 transaction fee is included.
Duplicate address found, can only send to each address once per send operation.
Duplicate address found, can only send to each address once per send operation.
Transaction creation failed!
Transaction creation failed!
The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.
The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.
Error: The wallet was unlocked only to anonymize coins.
Error: The wallet was unlocked only to anonymize coins.
Warning: Invalid Dash address
Warning: Invalid Dash address
Warning: Unknown change address
Warning: Unknown change address
(no label)
(no label)
SendCoinsEntry
This is a normal payment.
This is a normal payment.
Pay &To:
Pay &To:
The address to send the payment to (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg)
The address to send the payment to (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg)
Choose previously used address
Choose previously used address
Alt+A
Alt+A
Paste address from clipboard
Paste address from clipboard
Alt+P
Alt+P
Remove this entry
Remove this entry
&Label:
&Label:
Enter a label for this address to add it to the list of used addresses
Enter a label for this address to add it to the list of used addresses
A&mount:
A&mount:
Message:
Message:
A message that was attached to the darkcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Dash network.
A message that was attached to the darkcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Dash network.
This is an unverified payment request.
This is an unverified payment request.
Pay To:
Pay To:
Memo:
Memo:
This is a verified payment request.
This is a verified payment request.
Enter a label for this address to add it to your address book
Enter a label for this address to add it to your address book
ShutdownWindow
Dash Core is shutting down...
Dash Core is shutting down...
Do not shut down the computer until this window disappears.
Do not shut down the computer until this window disappears.
SignVerifyMessageDialog
Signatures - Sign / Verify a Message
Signatures - Sign / Verify a Message
&Sign Message
&Sign Message
You can sign messages with your addresses to prove you own them. Be careful not to sign anything vague, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to.
You can sign messages with your addresses to prove you own them. Be careful not to sign anything vague, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to.
The address to sign the message with (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg)
The address to sign the message with (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg)
Choose previously used address
Choose previously used address
Alt+A
Alt+A
Paste address from clipboard
Paste address from clipboard
Alt+P
Alt+P
Enter the message you want to sign here
Enter the message you want to sign here
Signature
Signature
Copy the current signature to the system clipboard
Copy the current signature to the system clipboard
Sign the message to prove you own this Dash address
Sign the message to prove you own this Dash address
Sign &Message
Sign &Message
Reset all sign message fields
Reset all sign message fields
Clear &All
Clear &All
&Verify Message
&Verify Message
Enter the signing address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack.
Enter the signing address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack.
The address the message was signed with (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg)
The address the message was signed with (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg)
Verify the message to ensure it was signed with the specified Dash address
Verify the message to ensure it was signed with the specified Dash address
Verify &Message
Verify &Message
Reset all verify message fields
Reset all verify message fields
Click "Sign Message" to generate signature
Click "Sign Message" to generate signature
Enter a Dash address (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg)
Enter a Dash address (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg)
The entered address is invalid.
The entered address is invalid.
Please check the address and try again.
Please check the address and try again.
The entered address does not refer to a key.
The entered address does not refer to a key.
Wallet unlock was cancelled.
Wallet unlock was cancelled.
Private key for the entered address is not available.
Private key for the entered address is not available.
Message signing failed.
Message signing failed.
Message signed.
Message signed.
The signature could not be decoded.
The signature could not be decoded.
Please check the signature and try again.
Please check the signature and try again.
The signature did not match the message digest.
The signature did not match the message digest.
Message verification failed.
Message verification failed.
Message verified.
Message verified.
SplashScreen
Dash Core
Dash Core
Version %1
Version %1
The Bitcoin Core developers
The Bitcoin Core developers
The Dash Core developers
The Dash Core developers
[testnet]
[testnet]
TrafficGraphWidget
KB/s
KB/s
TransactionDesc
Open for %n more block(s)
Open for %n more block(s)
Open for %n more block(s)
Open until %1
Open until %1
conflicted
conflicted
%1/offline (verified via instantx)
%1/offline (verified via instantx)
%1/confirmed (verified via instantx)
%1/confirmed (verified via instantx)
%1 confirmations (verified via instantx)
%1 confirmations (verified via instantx)
%1/offline
%1/offline
%1/unconfirmed
%1/unconfirmed
%1 confirmations
%1 confirmations
%1/offline (InstantX verification in progress - %2 of %3 signatures)
%1/offline (InstantX verification in progress - %2 of %3 signatures)
%1/confirmed (InstantX verification in progress - %2 of %3 signatures )
%1/confirmed (InstantX verification in progress - %2 of %3 signatures )
%1 confirmations (InstantX verification in progress - %2 of %3 signatures)
%1 confirmations (InstantX verification in progress - %2 of %3 signatures)
%1/offline (InstantX verification failed)
%1/offline (InstantX verification failed)
%1/confirmed (InstantX verification failed)
%1/confirmed (InstantX verification failed)
Status
Status
, has not been successfully broadcast yet
, has not been successfully broadcast yet
, broadcast through %n node(s)
, broadcast through %n node(s)
, broadcast through %n node(s)
Date
Date
Source
Source
Generated
Generated
From
From
unknown
unknown
To
To
own address
own address
label
label
Credit
Credit
matures in %n more block(s)
matures in %n more block(s)
matures in %n more block(s)
not accepted
not accepted
Debit
Debit
Transaction fee
Transaction fee
Net amount
Net amount
Message
Message
Comment
Comment
Transaction ID
Transaction ID
Merchant
Merchant
Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.
Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.
Debug information
Debug information
Transaction
Transaction
Inputs
Inputs
Amount
Amount
true
true
false
false
TransactionDescDialog
Transaction details
Transaction details
This pane shows a detailed description of the transaction
This pane shows a detailed description of the transaction
TransactionTableModel
Date
Date
Type
Type
Address
Address
Amount
Amount
Open for %n more block(s)
Open for %n more block(s)
Open for %n more block(s)
Open until %1
Open until %1
Offline
Offline
Unconfirmed
Unconfirmed
Confirming (%1 of %2 recommended confirmations)
Confirming (%1 of %2 recommended confirmations)
Confirmed (%1 confirmations)
Confirmed (%1 confirmations)
Conflicted
Conflicted
Immature (%1 confirmations, will be available after %2)
Immature (%1 confirmations, will be available after %2)
This block was not received by any other nodes and will probably not be accepted!
This block was not received by any other nodes and will probably not be accepted!
Generated but not accepted
Generated but not accepted
Received with
Received with
Received from
Received from
Received via Darksend
Received via Darksend
Sent to
Sent to
Payment to yourself
Payment to yourself
Mined
Mined
Darksend Denominate
Darksend Denominate
Darksend Collateral Payment
Darksend Collateral Payment
Darksend Make Collateral Inputs
Darksend Make Collateral Inputs
Darksend Create Denominations
Darksend Create Denominations
Darksent
Darksent
(n/a)
(n/a)
Transaction status. Hover over this field to show number of confirmations.
Transaction status. Hover over this field to show number of confirmations.
Date and time that the transaction was received.
Date and time that the transaction was received.
Type of transaction.
Type of transaction.
Destination address of transaction.
Destination address of transaction.
Amount removed from or added to balance.
Amount removed from or added to balance.
TransactionView
All
All
Today
Today
This week
This week
This month
This month
Last month
Last month
This year
This year
Range...
Range...
Received with
Received with
Sent to
Sent to
Darksent
Darksent
Darksend Make Collateral Inputs
Darksend Make Collateral Inputs
Darksend Create Denominations
Darksend Create Denominations
Darksend Denominate
Darksend Denominate
Darksend Collateral Payment
Darksend Collateral Payment
To yourself
To yourself
Mined
Mined
Other
Other
Enter address or label to search
Enter address or label to search
Min amount
Min amount
Copy address
Copy address
Copy label
Copy label
Copy amount
Copy amount
Copy transaction ID
Copy transaction ID
Edit label
Edit label
Show transaction details
Show transaction details
Export Transaction History
Export Transaction History
Comma separated file (*.csv)
Comma separated file (*.csv)
Confirmed
Confirmed
Date
Date
Type
Type
Label
Label
Address
Address
Amount
Amount
ID
ID
Exporting Failed
Exporting Failed
There was an error trying to save the transaction history to %1.
There was an error trying to save the transaction history to %1.
Exporting Successful
Exporting Successful
The transaction history was successfully saved to %1.
The transaction history was successfully saved to %1.
Range:
Range:
to
to
WalletFrame
No wallet has been loaded.
No wallet has been loaded.
WalletModel
Send Coins
Send Coins
InstantX doesn't support sending values that high yet. Transactions are currently limited to %n DASH.
WalletView
&Export
&Export
Export the data in the current tab to a file
Export the data in the current tab to a file
Backup Wallet
Backup Wallet
Wallet Data (*.dat)
Wallet Data (*.dat)
Backup Failed
Backup Failed
There was an error trying to save the wallet data to %1.
There was an error trying to save the wallet data to %1.
Backup Successful
Backup Successful
The wallet data was successfully saved to %1.
The wallet data was successfully saved to %1.
darkcoin-core
%s, you must set a rpcpassword in the configuration file:
%s
It is recommended you use the following random password:
rpcuser=darkcoinrpc
rpcpassword=%s
(you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions.
It is also recommended to set alertnotify so you are notified of problems;
for example: alertnotify=echo %%s | mail -s "Dash Alert" admin@foo.com
%s, you must set a rpcpassword in the configuration file:
%s
It is recommended you use the following random password:
rpcuser=darkcoinrpc
rpcpassword=%s
(you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions.
It is also recommended to set alertnotify so you are notified of problems;
for example: alertnotify=echo %%s | mail -s "Dash Alert" admin@foo.com
Acceptable ciphers (default: TLSv1.2+HIGH:TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!3DES:@STRENGTH)
Acceptable ciphers (default: TLSv1.2+HIGH:TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!3DES:@STRENGTH)
An error occurred while setting up the RPC port %u for listening on IPv4: %s
An error occurred while setting up the RPC port %u for listening on IPv4: %s
An error occurred while setting up the RPC port %u for listening on IPv6, falling back to IPv4: %s
An error occurred while setting up the RPC port %u for listening on IPv6, falling back to IPv4: %s
Bind to given address and always listen on it. Use [host]:port notation for IPv6
Bind to given address and always listen on it. Use [host]:port notation for IPv6
Cannot obtain a lock on data directory %s. Dash Core is probably already running.
Cannot obtain a lock on data directory %s. Dash Core is probably already running.
Continuously rate-limit free transactions to <n>*1000 bytes per minute (default:15)
Continuously rate-limit free transactions to <n>*1000 bytes per minute (default:15)
Darksend uses exact denominated amounts to send funds, you might simply need to anonymize some more coins.
Darksend uses exact denominated amounts to send funds, you might simply need to anonymize some more coins.
Disable all Masternode and Darksend related functionality (0-1, default: 0)
Disable all Masternode and Darksend related functionality (0-1, default: 0)
Enable instantx, show confirmations for locked transactions (bool, default: true)
Enable instantx, show confirmations for locked transactions (bool, default: true)
Enable use of automated darksend for funds stored in this wallet (0-1, default: 0)
Enable use of automated darksend for funds stored in this wallet (0-1, default: 0)
Enter regression test mode, which uses a special chain in which blocks can be solved instantly. This is intended for regression testing tools and app development.
Enter regression test mode, which uses a special chain in which blocks can be solved instantly. This is intended for regression testing tools and app development.
Enter regression test mode, which uses a special chain in which blocks can be solved instantly.
Enter regression test mode, which uses a special chain in which blocks can be solved instantly.
Error: Listening for incoming connections failed (listen returned error %s)
Error: Listening for incoming connections failed (listen returned error %s)
Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.
Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.
Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds!
Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds!
Error: Wallet unlocked for anonymization only, unable to create transaction.
Error: Wallet unlocked for anonymization only, unable to create transaction.
Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)
Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)
Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)
Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)
Execute command when the best block changes (%s in cmd is replaced by block hash)
Execute command when the best block changes (%s in cmd is replaced by block hash)
Fees smaller than this are considered zero fee (for transaction creation) (default:
Fees smaller than this are considered zero fee (for transaction creation) (default:
Flush database activity from memory pool to disk log every <n> megabytes (default: 100)
Flush database activity from memory pool to disk log every <n> megabytes (default: 100)
Found unconfirmed denominated outputs, will wait till they confirm to continue.
Found unconfirmed denominated outputs, will wait till they confirm to continue.
How thorough the block verification of -checkblocks is (0-4, default: 3)
How thorough the block verification of -checkblocks is (0-4, default: 3)
In this mode -genproclimit controls how many blocks are generated immediately.
In this mode -genproclimit controls how many blocks are generated immediately.
InstantX requires inputs with at least 6 confirmations, you might need to wait a few minutes and try again.
InstantX requires inputs with at least 6 confirmations, you might need to wait a few minutes and try again.
Listen for JSON-RPC connections on <port> (default: 9998 or testnet: 19998)
Listen for JSON-RPC connections on <port> (default: 9998 or testnet: 19998)
Name to construct url for KeePass entry that stores the wallet passphrase
Name to construct url for KeePass entry that stores the wallet passphrase
Number of seconds to keep misbehaving peers from reconnecting (default: 86400)
Number of seconds to keep misbehaving peers from reconnecting (default: 86400)
Output debugging information (default: 0, supplying <category> is optional)
Output debugging information (default: 0, supplying <category> is optional)
Provide liquidity to Darksend by infrequently mixing coins on a continual basis (0-100, default: 0, 1=very frequent, high fees, 100=very infrequent, low fees)
Provide liquidity to Darksend by infrequently mixing coins on a continual basis (0-100, default: 0, 1=very frequent, high fees, 100=very infrequent, low fees)
Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect)
Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect)
Set external address:port to get to this masternode (example: address:port)
Set external address:port to get to this masternode (example: address:port)
Set maximum size of high-priority/low-fee transactions in bytes (default: %d)
Set maximum size of high-priority/low-fee transactions in bytes (default: %d)
Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d)
Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d)
Set the processor limit for when generation is on (-1 = unlimited, default: -1)
Set the processor limit for when generation is on (-1 = unlimited, default: -1)
Show N confirmations for a successfully locked transaction (0-9999, default: 1)
Show N confirmations for a successfully locked transaction (0-9999, default: 1)
This is a pre-release test build - use at your own risk - do not use for mining or merchant applications
This is a pre-release test build - use at your own risk - do not use for mining or merchant applications
Unable to bind to %s on this computer. Dash Core is probably already running.
Unable to bind to %s on this computer. Dash Core is probably already running.
Unable to locate enough Darksend denominated funds for this transaction.
Unable to locate enough Darksend denominated funds for this transaction.
Unable to locate enough Darksend non-denominated funds for this transaction that are not equal 1000 DASH.
Unable to locate enough Darksend non-denominated funds for this transaction that are not equal 1000 DASH.
Unable to locate enough Darksend non-denominated funds for this transaction.
Unable to locate enough Darksend non-denominated funds for this transaction.
Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: -proxy)
Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: -proxy)
Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction.
Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction.
Warning: Please check that your computer's date and time are correct! If your clock is wrong Dash will not work properly.
Warning: Please check that your computer's date and time are correct! If your clock is wrong Dash will not work properly.
Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues.
Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues.
Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade.
Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade.
Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect.
Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect.
Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup.
Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup.
You must set rpcpassword=<password> in the configuration file:
%s
If the file does not exist, create it with owner-readable-only file permissions.
You must set rpcpassword=<password> in the configuration file:
%s
If the file does not exist, create it with owner-readable-only file permissions.
You must specify a masternodeprivkey in the configuration. Please see documentation for help.
You must specify a masternodeprivkey in the configuration. Please see documentation for help.
(default: 1)
(default: 1)
(default: wallet.dat)
(default: wallet.dat)
<category> can be:
<category> can be:
Accept command line and JSON-RPC commands
Accept command line and JSON-RPC commands
Accept connections from outside (default: 1 if no -proxy or -connect)
Accept connections from outside (default: 1 if no -proxy or -connect)
Add a node to connect to and attempt to keep the connection open
Add a node to connect to and attempt to keep the connection open
Allow DNS lookups for -addnode, -seednode and -connect
Allow DNS lookups for -addnode, -seednode and -connect
Allow JSON-RPC connections from specified IP address
Allow JSON-RPC connections from specified IP address
Already have that input.
Already have that input.
Always query for peer addresses via DNS lookup (default: 0)
Always query for peer addresses via DNS lookup (default: 0)
Attempt to recover private keys from a corrupt wallet.dat
Attempt to recover private keys from a corrupt wallet.dat
Block creation options:
Block creation options:
Can't denominate: no compatible inputs left.
Can't denominate: no compatible inputs left.
Cannot downgrade wallet
Cannot downgrade wallet
Cannot resolve -bind address: '%s'
Cannot resolve -bind address: '%s'
Cannot resolve -externalip address: '%s'
Cannot resolve -externalip address: '%s'
Cannot write default address
Cannot write default address
Clear list of wallet transactions (diagnostic tool; implies -rescan)
Clear list of wallet transactions (diagnostic tool; implies -rescan)
Collateral is not valid.
Collateral is not valid.
Collateral not valid.
Collateral not valid.
Connect only to the specified node(s)
Connect only to the specified node(s)
Connect through SOCKS proxy
Connect through SOCKS proxy
Connect to JSON-RPC on <port> (default: 9998 or testnet: 19998)
Connect to JSON-RPC on <port> (default: 9998 or testnet: 19998)
Connect to KeePassHttp on port <port> (default: 19455)
Connect to KeePassHttp on port <port> (default: 19455)
Connect to a node to retrieve peer addresses, and disconnect
Connect to a node to retrieve peer addresses, and disconnect
Connection options:
Connection options:
Corrupted block database detected
Corrupted block database detected
Dash Core Daemon
Dash Core Daemon
Dash Core RPC client version
Dash Core RPC client version
Darksend is disabled.
Darksend is disabled.
Darksend options:
Darksend options:
Debugging/Testing options:
Debugging/Testing options:
Disable safemode, override a real safe mode event (default: 0)
Disable safemode, override a real safe mode event (default: 0)
Discover own IP address (default: 1 when listening and no -externalip)
Discover own IP address (default: 1 when listening and no -externalip)
Do not load the wallet and disable wallet RPC calls
Do not load the wallet and disable wallet RPC calls
Do you want to rebuild the block database now?
Do you want to rebuild the block database now?
Done loading
Done loading
Downgrading and trying again.
Enable the client to act as a masternode (0-1, default: 0)
Enable the client to act as a masternode (0-1, default: 0)
Entries are full.
Entries are full.
Error connecting to masternode.
Error connecting to masternode.
Error initializing block database
Error initializing block database
Error initializing wallet database environment %s!
Error initializing wallet database environment %s!
Error loading block database
Error loading block database
Error loading wallet.dat
Error loading wallet.dat
Error loading wallet.dat: Wallet corrupted
Error loading wallet.dat: Wallet corrupted
Error loading wallet.dat: Wallet requires newer version of Dash
Error loading wallet.dat: Wallet requires newer version of Dash
Error opening block database
Error opening block database
Error reading from database, shutting down.
Error reading from database, shutting down.
Error recovering public key.
Error recovering public key.
Error
Error
Error: Disk space is low!
Error: Disk space is low!
Error: Wallet locked, unable to create transaction!
Error: Wallet locked, unable to create transaction!
Error: You already have pending entries in the Darksend pool
Error: You already have pending entries in the Darksend pool
Error: system error:
Error: system error:
Failed to listen on any port. Use -listen=0 if you want this.
Failed to listen on any port. Use -listen=0 if you want this.
Failed to read block info
Failed to read block info
Failed to read block
Failed to read block
Failed to sync block index
Failed to sync block index
Failed to write block index
Failed to write block index
Failed to write block info
Failed to write block info
Failed to write block
Failed to write block
Failed to write file info
Failed to write file info
Failed to write to coin database
Failed to write to coin database
Failed to write transaction index
Failed to write transaction index
Failed to write undo data
Failed to write undo data
Fee per kB to add to transactions you send
Fee per kB to add to transactions you send
Fees smaller than this are considered zero fee (for relaying) (default:
Fees smaller than this are considered zero fee (for relaying) (default:
Force safe mode (default: 0)
Force safe mode (default: 0)
Generate coins (default: 0)
Generate coins (default: 0)
Get help for a command
Get help for a command
How many blocks to check at startup (default: 288, 0 = all)
How many blocks to check at startup (default: 288, 0 = all)
If <category> is not supplied, output all debugging information.
If <category> is not supplied, output all debugging information.
Ignore masternodes less than version (example: 70050; default : 0)
Ignore masternodes less than version (example: 70050; default : 0)
Importing...
Importing...
Imports blocks from external blk000??.dat file
Imports blocks from external blk000??.dat file
Incompatible mode.
Incompatible mode.
Incompatible version.
Incompatible version.
Incorrect or no genesis block found. Wrong datadir for network?
Incorrect or no genesis block found. Wrong datadir for network?
Information
Information
Initialization sanity check failed. Dash Core is shutting down.
Initialization sanity check failed. Dash Core is shutting down.
Input is not valid.
Input is not valid.
InstantX options:
InstantX options:
Insufficient funds
Insufficient funds
Insufficient funds.
Insufficient funds.
Invalid -onion address: '%s'
Invalid -onion address: '%s'
Invalid -proxy address: '%s'
Invalid -proxy address: '%s'
Invalid amount for -minrelaytxfee=<amount>: '%s'
Invalid amount for -minrelaytxfee=<amount>: '%s'
Invalid amount for -mintxfee=<amount>: '%s'
Invalid amount for -mintxfee=<amount>: '%s'
Invalid amount for -paytxfee=<amount>: '%s'
Invalid amount for -paytxfee=<amount>: '%s'
Invalid amount
Invalid amount
Invalid masternodeprivkey. Please see documenation.
Invalid masternodeprivkey. Please see documenation.
Invalid private key.
Invalid private key.
Invalid script detected.
Invalid script detected.
KeePassHttp id for the established association
KeePassHttp id for the established association
KeePassHttp key for AES encrypted communication with KeePass
KeePassHttp key for AES encrypted communication with KeePass
Keep N darkcoin anonymized (default: 0)
Keep N darkcoin anonymized (default: 0)
Keep at most <n> unconnectable blocks in memory (default: %u)
Keep at most <n> unconnectable blocks in memory (default: %u)
Keep at most <n> unconnectable transactions in memory (default: %u)
Keep at most <n> unconnectable transactions in memory (default: %u)
Last Darksend was too recent.
Last Darksend was too recent.
Last successful darksend action was too recent.
Last successful darksend action was too recent.
Limit size of signature cache to <n> entries (default: 50000)
Limit size of signature cache to <n> entries (default: 50000)
List commands
List commands
Listen for connections on <port> (default: 9999 or testnet: 19999)
Listen for connections on <port> (default: 9999 or testnet: 19999)
Loading addresses...
Loading addresses...
Loading block index...
Loading block index...
Loading masternode list...
Loading wallet... (%3.2f %%)
Loading wallet... (%3.2f %%)
Loading wallet...
Loading wallet...
Log transaction priority and fee per kB when mining blocks (default: 0)
Log transaction priority and fee per kB when mining blocks (default: 0)
Maintain a full transaction index (default: 0)
Maintain a full transaction index (default: 0)
Maintain at most <n> connections to peers (default: 125)
Maintain at most <n> connections to peers (default: 125)
Masternode options:
Masternode options:
Masternode queue is full.
Masternode queue is full.
Masternode:
Masternode:
Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000)
Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000)
Maximum per-connection send buffer, <n>*1000 bytes (default: 1000)
Maximum per-connection send buffer, <n>*1000 bytes (default: 1000)
Missing input transaction information.
Missing input transaction information.
No compatible masternode found.
No compatible masternode found.
No funds detected in need of denominating.
No funds detected in need of denominating.
No masternodes detected.
No masternodes detected.
No matching denominations found for mixing.
No matching denominations found for mixing.
Non-standard public key detected.
Non-standard public key detected.
Not compatible with existing transactions.
Not compatible with existing transactions.
Not enough file descriptors available.
Not enough file descriptors available.
Not in the masternode list.
Not in the masternode list.
Only accept block chain matching built-in checkpoints (default: 1)
Only accept block chain matching built-in checkpoints (default: 1)
Only connect to nodes in network <net> (IPv4, IPv6 or Tor)
Only connect to nodes in network <net> (IPv4, IPv6 or Tor)
Options:
Options:
Password for JSON-RPC connections
Password for JSON-RPC connections
Prepend debug output with timestamp (default: 1)
Prepend debug output with timestamp (default: 1)
Print block on startup, if found in block index
Print block on startup, if found in block index
Print block tree on startup (default: 0)
Print block tree on startup (default: 0)
RPC SSL options: (see the Bitcoin Wiki for SSL setup instructions)
RPC SSL options: (see the Bitcoin Wiki for SSL setup instructions)
RPC client options:
RPC client options:
RPC server options:
RPC server options:
Randomly drop 1 of every <n> network messages
Randomly drop 1 of every <n> network messages
Randomly fuzz 1 of every <n> network messages
Randomly fuzz 1 of every <n> network messages
Rebuild block chain index from current blk000??.dat files
Rebuild block chain index from current blk000??.dat files
Rescan the block chain for missing wallet transactions
Rescan the block chain for missing wallet transactions
Rescanning...
Rescanning...
Run a thread to flush wallet periodically (default: 1)
Run a thread to flush wallet periodically (default: 1)
Run in the background as a daemon and accept commands
Run in the background as a daemon and accept commands
SSL options: (see the Bitcoin Wiki for SSL setup instructions)
SSL options: (see the Bitcoin Wiki for SSL setup instructions)
Select SOCKS version for -proxy (4 or 5, default: 5)
Select SOCKS version for -proxy (4 or 5, default: 5)
Send command to Dash Core
Send command to Dash Core
Send commands to node running on <ip> (default: 127.0.0.1)
Send commands to node running on <ip> (default: 127.0.0.1)
Send trace/debug info to console instead of debug.log file
Send trace/debug info to console instead of debug.log file
Server certificate file (default: server.cert)
Server certificate file (default: server.cert)
Server private key (default: server.pem)
Server private key (default: server.pem)
Session not complete!
Session not complete!
Session timed out (30 seconds), please resubmit.
Session timed out (30 seconds), please resubmit.
Set database cache size in megabytes (%d to %d, default: %d)
Set database cache size in megabytes (%d to %d, default: %d)
Set key pool size to <n> (default: 100)
Set key pool size to <n> (default: 100)
Set maximum block size in bytes (default: %d)
Set maximum block size in bytes (default: %d)
Set minimum block size in bytes (default: 0)
Set minimum block size in bytes (default: 0)
Set the masternode private key
Set the masternode private key
Set the number of threads to service RPC calls (default: 4)
Set the number of threads to service RPC calls (default: 4)
Sets the DB_PRIVATE flag in the wallet db environment (default: 1)
Sets the DB_PRIVATE flag in the wallet db environment (default: 1)
Show all debugging options (usage: --help -help-debug)
Show all debugging options (usage: --help -help-debug)
Show benchmark information (default: 0)
Show benchmark information (default: 0)
Shrink debug.log file on client startup (default: 1 when no -debug)
Shrink debug.log file on client startup (default: 1 when no -debug)
Signing failed.
Signing failed.
Signing timed out, please resubmit.
Signing timed out, please resubmit.
Signing transaction failed
Signing transaction failed
Specify configuration file (default: darkcoin.conf)
Specify configuration file (default: darkcoin.conf)
Specify connection timeout in milliseconds (default: 5000)
Specify connection timeout in milliseconds (default: 5000)
Specify data directory
Specify data directory
Specify masternode configuration file (default: masternode.conf)
Specify masternode configuration file (default: masternode.conf)
Specify pid file (default: darkcoind.pid)
Specify pid file (default: darkcoind.pid)
Specify wallet file (within data directory)
Specify wallet file (within data directory)
Specify your own public address
Specify your own public address
Spend unconfirmed change when sending transactions (default: 1)
Spend unconfirmed change when sending transactions (default: 1)
Start Dash Core Daemon
Start Dash Core Daemon
System error:
System error:
This help message
This help message
This is intended for regression testing tools and app development.
This is intended for regression testing tools and app development.
This is not a masternode.
This is not a masternode.
Threshold for disconnecting misbehaving peers (default: 100)
Threshold for disconnecting misbehaving peers (default: 100)
To use the %s option
To use the %s option
Transaction amount too small
Transaction amount too small
Transaction amounts must be positive
Transaction amounts must be positive
Transaction created successfully.
Transaction created successfully.
Transaction fees are too high.
Transaction fees are too high.
Transaction not valid.
Transaction not valid.
Transaction too large
Transaction too large
Unable to bind to %s on this computer (bind returned error %s)
Unable to bind to %s on this computer (bind returned error %s)
Unable to sign masternode payment winner, wrong key?
Unable to sign masternode payment winner, wrong key?
Unable to sign spork message, wrong key?
Unable to sign spork message, wrong key?
Unknown -socks proxy version requested: %i
Unknown -socks proxy version requested: %i
Unknown network specified in -onlynet: '%s'
Unknown network specified in -onlynet: '%s'
Upgrade wallet to latest format
Upgrade wallet to latest format
Usage (deprecated, use darkcoin-cli):
Usage (deprecated, use darkcoin-cli):
Usage:
Usage:
Use KeePass 2 integration using KeePassHttp plugin (default: 0)
Use KeePass 2 integration using KeePassHttp plugin (default: 0)
Use N separate masternodes to anonymize funds (2-8, default: 2)
Use N separate masternodes to anonymize funds (2-8, default: 2)
Use OpenSSL (https) for JSON-RPC connections
Use OpenSSL (https) for JSON-RPC connections
Use UPnP to map the listening port (default: 0)
Use UPnP to map the listening port (default: 0)
Use UPnP to map the listening port (default: 1 when listening)
Use UPnP to map the listening port (default: 1 when listening)
Use the test network
Use the test network
Username for JSON-RPC connections
Username for JSON-RPC connections
Value more than Darksend pool maximum allows.
Value more than Darksend pool maximum allows.
Verifying blocks...
Verifying blocks...
Verifying wallet...
Verifying wallet...
Wait for RPC server to start
Wait for RPC server to start
Wallet %s resides outside data directory %s
Wallet %s resides outside data directory %s
Wallet is locked.
Wallet is locked.
Wallet needed to be rewritten: restart Dash to complete
Wallet needed to be rewritten: restart Dash to complete
Wallet options:
Wallet options:
Warning
Warning
Warning: Deprecated argument -debugnet ignored, use -debug=net
Warning: Deprecated argument -debugnet ignored, use -debug=net
Warning: This version is obsolete, upgrade required!
Warning: This version is obsolete, upgrade required!
Wrong state.
Wrong state.
You need to rebuild the database using -reindex to change -txindex
You need to rebuild the database using -reindex to change -txindex
Zapping all transactions from wallet...
Zapping all transactions from wallet...
on startup
on startup
version
version
wallet.dat corrupt, salvage failed
wallet.dat corrupt, salvage failed