AboutDialog About Darkcoin Core Darkcoin Core version This is experimental software. Distributed under the MIT/X11 software license, see the accompanying file COPYING or http://www.opensource.org/licenses/mit-license.php. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) and cryptographic software written by Eric Young (eay@cryptsoft.com) and UPnP software written by Thomas Bernard. Copyright The Bitcoin Core developers The Darkcoin Core developers (%1-bit) AddressBookPage Double-click to edit address or label Klik dua kali untuk mengubah alamat atau label Create a new address Cipta alamat baru &New &Baru Copy the currently selected address to the system clipboard Salin alamat terpilih ke dalam sistem papan klip &Copy &Salin Delete the currently selected address from the list &Delete &Padam Export the data in the current tab to a file &Export &Eksport C&lose Choose the address to send coins to Pilih alamat untuk menghantar syiling Choose the address to receive coins with Pilih alamat untuk menerima syiling C&hoose &Pilih Sending addresses Receiving addresses These are your Darkcoin addresses for sending payments. Always check the amount and the receiving address before sending coins. These are your Darkcoin addresses for receiving payments. It is recommended to use a new receiving address for each transaction. &Copy Address &Salin Alamat Copy &Label &Edit Export Address List Comma separated file (*.csv) Fail yang dipisahkan dengan koma Exporting Failed There was an error trying to save the address list to %1. AddressTableModel Label Address Alamat (no label) AskPassphraseDialog Passphrase Dialog Enter passphrase New passphrase Repeat new passphrase Serves to disable the trivial sendmoney when OS account compromised. Provides no real security. For anonymization only Enter the new passphrase to the wallet. Please use a passphrase of 10 or more random characters, or eight or more words. Encrypt wallet This operation needs your wallet passphrase to unlock the wallet. Unlock wallet This operation needs your wallet passphrase to decrypt the wallet. Decrypt wallet Change passphrase Enter the old and new passphrase to the wallet. Confirm wallet encryption Warning: If you encrypt your wallet and lose your passphrase, you will LOSE ALL OF YOUR DARKCOINS! Are you sure you wish to encrypt your wallet? Wallet encrypted Darkcoin will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your darkcoins from being stolen by malware infecting your computer. IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet. Wallet encryption failed Wallet encryption failed due to an internal error. Your wallet was not encrypted. The supplied passphrases do not match. Wallet unlock failed The passphrase entered for the wallet decryption was incorrect. Wallet decryption failed Wallet passphrase was successfully changed. Warning: The Caps Lock key is on! BitcoinGUI Darkcoin Core Wallet Node [testnet] &Overview Show general overview of wallet &Send Send coins to a Darkcoin address &Receive Request payments (generates QR codes and darkcoin: URIs) &Transactions Browse transaction history E&xit Quit application &About Darkcoin Core Show information about Darkcoin About &Qt Show information about Qt &Options... Pilihan Modify configuration options for Darkcoin &Show / Hide Show or hide the main Window &Encrypt Wallet... Encrypt the private keys that belong to your wallet &Backup Wallet... Backup wallet to another location &Change Passphrase... Change the passphrase used for wallet encryption &Unlock Wallet... Unlock wallet &Lock Wallet Sign &message... Sign messages with your Darkcoin addresses to prove you own them &Verify message... Verify messages to ensure they were signed with specified Darkcoin addresses &Information Show diagnostic information &Debug console Open debugging console &Network Monitor Show network monitor &Sending addresses... Show the list of used sending addresses and labels &Receiving addresses... Show the list of used receiving addresses and labels Open &URI... Open a darkcoin: URI or payment request &Command-line options Show the Darkcoin Core help message to get a list with possible Darkcoin command-line options &File &Settings &Tools &Help Tabs toolbar Darkcoin client %n active connection(s) to Darkcoin network Synchronizing with network... Importing blocks from disk... Reindexing blocks on disk... No block source available... Processed %1 blocks of transaction history. Up to date %n hour(s) %n day(s) %n week(s) %1 and %2 %n year(s) %1 behind Catching up... Last received block was generated %1 ago. Transactions after this will not yet be visible. Darkcoin Error Warning Information Sent transaction Incoming transaction Date: %1 Amount: %2 Type: %3 Address: %4 Wallet is encrypted and currently unlocked Wallet is encrypted and currently unlocked for anonimization only Wallet is encrypted and currently locked A fatal error occurred. Darkcoin can no longer continue safely and will quit. ClientModel Network Alert CoinControlDialog Coin Control Address Selection Quantity: Bytes: Amount: Priority: Fee: Low Output: After Fee: Change: (un)select all Tree mode List mode Amount Address Alamat Darksend Rounds Date Confirmations Confirmed Priority Copy address Copy label Copy amount Copy transaction ID Lock unspent Unlock unspent Copy quantity Copy fee Copy after fee Copy bytes Copy priority Copy low output Copy change highest higher high medium-high medium low-medium low lower lowest (%1 locked) none Dust yes no This label turns red, if the transaction size is greater than 1000 bytes. This means a fee of at least %1 per kB is required. Can vary +/- 1 byte per input. Transactions with higher priority are more likely to get included into a block. This label turns red, if the priority is smaller than "medium". This label turns red, if any recipient receives an amount smaller than %1. This means a fee of at least %1 is required. Amounts below 0.546 times the minimum relay fee are shown as dust. This label turns red, if the change is smaller than %1. (no label) change from %1 (%2) (change) DarksendConfig Configure Darksend Basic Privacy High Privacy Maximum Privacy Please select a privacy level. Use 2 separate masternodes to mix funds up to 1000 DRK Use 8 separate masternodes to mix funds up to 1000 DRK Use 16 separate masternodes This option is the quickest and will cost about ~0.025 DRK to anonymize 1000 DRK This option is moderately fast and will cost about 0.05 DRK to anonymize 1000 DRK 0.1 DRK per 1000 DRK you anonymize. This is the slowest and most secure option. Using maximum anonymity will cost Darksend Configuration Darksend was successfully set to basic (%1 and 2 rounds). You can change this at any time by opening Darkcoin's configuration screen. Darksend was successfully set to high (%1 and 8 rounds). You can change this at any time by opening Darkcoin's configuration screen. Darksend was successfully set to maximum (%1 and 16 rounds). You can change this at any time by opening Darkcoin's configuration screen. EditAddressDialog Edit Address Alamat &Label The label associated with this address list entry &Address Alamat The address associated with this address list entry. This can only be modified for sending addresses. New receiving address New sending address Edit receiving address Edit sending address The entered address "%1" is not a valid Darkcoin address. The entered address "%1" is already in the address book. Could not unlock wallet. New key generation failed. FreespaceChecker A new data directory will be created. name Directory already exists. Add %1 if you intend to create a new directory here. Path already exists, and is not a directory. Cannot create data directory here. HelpMessageDialog Darkcoin Core - Command-line options Darkcoin Core version Usage: command-line options UI options Choose data directory on startup (default: 0) Set language, for example "de_DE" (default: system locale) Start minimized Set SSL root certificates for payment request (default: -system-) Show splash screen on startup (default: 1) Intro Welcome Welcome to Darkcoin Core. As this is the first time the program is launched, you can choose where Darkcoin Core will store its data. Darkcoin Core will download and store a copy of the Darkcoin block chain. At least %1GB of data will be stored in this directory, and it will grow over time. The wallet will also be stored in this directory. Use the default data directory Use a custom data directory: Darkcoin Error: Specified data directory "%1" can not be created. Error GB of free space available (of %1GB needed) OpenURIDialog Open URI Open payment request from URI or file URI: Select payment request file Select payment request file to open OptionsDialog Options &Main Automatically start Darkcoin after logging in to the system. &Start Darkcoin on system login Size of &database cache MB Number of script &verification threads (0 = auto, <0 = leave that many cores free) <html><head/><body>This setting determines the amount of individual masternodes that an input will be anonymized through. More rounds of anonymization gives a higher degree of privacy, but also costs more in fees.</body></html> Darksend rounds to use Amount of Darkcoin to keep anonymized W&allet Optional transaction fee per kB that helps make sure your transactions are processed quickly. Most transactions are 1 kB. Pay transaction &fee Expert Whether to show coin control features or not. Enable coin &control features If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed. &Spend unconfirmed change &Network Automatically open the Darkcoin client port on the router. This only works when your router supports UPnP and it is enabled. Map port using &UPnP Connect to the Darkcoin network through a SOCKS proxy. &Connect through SOCKS proxy (default proxy): Proxy &IP: IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1) &Port: Port of the proxy (e.g. 9050) SOCKS &Version: SOCKS version of the proxy (e.g. 5) &Window Show only a tray icon after minimizing the window. &Minimize to the tray instead of the taskbar Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Quit in the menu. M&inimize on close &Display User Interface &language: The user interface language can be set here. This setting will take effect after restarting Darkcoin. &Unit to show amounts in: Choose the default subdivision unit to show in the interface and when sending coins. Whether to show Darkcoin addresses in the transaction list or not. &Display addresses in transaction list Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |. Third party transaction URLs Active command-line options that override above options: Reset all client options to default. &Reset Options &OK &Cancel default none Confirm options reset Client restart required to activate changes. Client will be shutdown, do you want to proceed? This change would require a client restart. The supplied proxy address is invalid. OverviewPage Form Wallet The displayed information may be out of date. Your wallet automatically synchronizes with the Darkcoin network after a connection is established, but this process has not completed yet. Available: Your current spendable balance Pending: Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance Immature: Mined balance that has not yet matured Total: Your current total balance Status: Enabled/Disabled Completion: Darksend Balance: 0 DRK Amount and Rounds: 0 DRK / 0 Rounds Submitted Denom: The denominations you submitted to the Masternode. To mix, other users must submit the exact same denominations. n/a Darksend Start/Stop Mixing (Last Message) Try to manually submit a Darksend request. Try Mix Reset the current status of Darksend (can interrupt Darksend if it's in the process of Mixing, which can cost you money!) Reset Recent transactions out of sync Disabled Start Darksend Mixing Stop Darksend Mixing No inputs detected Found unconfirmed denominated outputs, will wait till they confirm to recalculate. Rounds Enabled Last Darksend message: Darksend is idle. Darksend request complete: Your transaction was accepted into the pool! Submitted following entries to masternode: Submitted to masternode, Waiting for more entries Found enough users, signing ... Found enough users, signing ( waiting. ) Found enough users, signing ( waiting.. ) Found enough users, signing ( waiting... ) Transmitting final transaction. Finalizing transaction. Darksend request incomplete: Will retry... Darksend request complete: Submitted to masternode, waiting in queue . Submitted to masternode, waiting in queue .. Submitted to masternode, waiting in queue ... Unknown state: N/A Darksend was successfully reset. Darksend requires at least %1 to use. Wallet is locked and user declined to unlock. Disabling Darksend. PaymentServer Payment request error Cannot start darkcoin: click-to-pay handler Net manager warning Your active proxy doesn't support SOCKS5, which is required for payment requests via proxy. URI handling Payment request fetch URL is invalid: %1 URI can not be parsed! This can be caused by an invalid Darkcoin address or malformed URI parameters. Payment request file handling Payment request file can not be read or processed! This can be caused by an invalid payment request file. Unverified payment requests to custom payment scripts are unsupported. Requested payment amount of %1 is too small (considered dust). Refund from %1 Error communicating with %1: %2 Payment request can not be parsed or processed! Bad response from server %1 Network request error Payment acknowledged QObject Darkcoin Error: Specified data directory "%1" does not exist. Error: Cannot parse configuration file: %1. Only use key=value syntax. Error reading masternode configuration file: %1 Error: Invalid combination of -regtest and -testnet. Darkcoin Core didn't yet exit safely... Enter a Darkcoin address (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg) QRImageWidget &Save Image... &Copy Image Save QR Code PNG Image (*.png) RPCConsole Tools window &Information Masternode Count General Name Client name N/A Number of connections Open the Darkcoin debug log file from the current data directory. This can take a few seconds for large log files. &Open Startup time Network Last block time Debug log file Using OpenSSL version Build date Current number of blocks Client version Block chain &Console Clear console &Network Traffic &Clear Totals In: Out: Welcome to the Darkcoin RPC console. Use up and down arrows to navigate history, and Ctrl-L to clear screen. Type help for an overview of available commands. %1 B %1 KB %1 MB %1 GB %1 m %1 h %1 h %2 m ReceiveCoinsDialog Reuse one of the previously used receiving addresses. Reusing addresses has security and privacy issues. Do not use this unless re-generating a payment request made before. R&euse an existing receiving address (not recommended) An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Darkcoin network. &Message: An optional label to associate with the new receiving address. Use this form to request payments. All fields are optional. &Label: An optional amount to request. Leave this empty or zero to not request a specific amount. &Amount: &Request payment Clear all fields of the form. Clear Requested payments history Show the selected request (does the same as double clicking an entry) Show Remove the selected entries from the list Remove Copy label Copy message Copy amount ReceiveRequestDialog QR Code Copy &URI Copy &Address &Save Image... Request payment to %1 Payment information URI Address Alamat Amount Label Message Resulting URI too long, try to reduce the text for label / message. Error encoding URI into QR Code. RecentRequestsTableModel Date Label Message Amount (no label) (no message) (no amount) SendCoinsDialog Send Coins Coin Control Features Inputs... automatically selected Insufficient funds! Quantity: Bytes: Amount: Priority: Fee: Low Output: After Fee: Change: If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address. Custom change address Confirm the send action S&end Clear all fields of the form. Clear &All Send to multiple recipients at once Add &Recipient Darksend InstantX Balance: Baki Copy quantity Copy amount Copy fee Copy after fee Copy bytes Copy priority Copy low output Copy change (darksend requires this amount to be rounded up to the nearest %1). %1 to %2 Are you sure you want to send? are added as transaction fee Total Amount %1 (= %2) or Confirm send coins Payment request expired Invalid payment address %1 The recipient address is not valid, please recheck. The amount to pay must be larger than 0. The amount exceeds your balance. The total exceeds your balance when the %1 transaction fee is included. Duplicate address found, can only send to each address once per send operation. Transaction creation failed! The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. Error: The wallet was unlocked only to anonymize coins. Warning: Invalid Darkcoin address Warning: Unknown change address (no label) SendCoinsEntry This is a normal payment. Pay &To: The address to send the payment to (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg) Choose previously used address Alt+A Paste address from clipboard Alt+P Remove this entry &Label: Enter a label for this address to add it to the list of used addresses A&mount: Message: A message that was attached to the darkcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Darkcoin network. This is an unverified payment request. Pay To: Memo: This is a verified payment request. Enter a label for this address to add it to your address book ShutdownWindow Darkcoin Core is shutting down... Do not shut down the computer until this window disappears. SignVerifyMessageDialog Signatures - Sign / Verify a Message &Sign Message You can sign messages with your addresses to prove you own them. Be careful not to sign anything vague, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. The address to sign the message with (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg) Choose previously used address Alt+A Paste address from clipboard Alt+P Enter the message you want to sign here Signature Copy the current signature to the system clipboard Sign the message to prove you own this Darkcoin address Sign &Message Reset all sign message fields Clear &All &Verify Message Enter the signing address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. The address the message was signed with (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg) Verify the message to ensure it was signed with the specified Darkcoin address Verify &Message Reset all verify message fields Click "Sign Message" to generate signature Enter a Darkcoin address (e.g. XwnLY9Tf7Zsef8gMGL2fhWA9ZmMjt4KPwg) The entered address is invalid. Please check the address and try again. The entered address does not refer to a key. Wallet unlock was cancelled. Private key for the entered address is not available. Message signing failed. Message signed. The signature could not be decoded. Please check the signature and try again. The signature did not match the message digest. Message verification failed. Message verified. SplashScreen Darkcoin Core Version %1 The Bitcoin Core developers The Darkcoin Core developers [testnet] TrafficGraphWidget KB/s TransactionDesc Open for %n more block(s) Open until %1 conflicted %1/offline (verified via instantx) %1/confirmed (verified via instantx) %1 confirmations (verified via instantx) %1/offline %1/unconfirmed %1 confirmations Status , has not been successfully broadcast yet , broadcast through %n node(s) Date Source Generated From unknown To own address label Credit matures in %n more block(s) not accepted Debit Transaction fee Net amount Message Comment Transaction ID Merchant Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours. Debug information Transaction Inputs Amount true false TransactionDescDialog Transaction details This pane shows a detailed description of the transaction TransactionTableModel Date Type Address Alamat Amount Open for %n more block(s) Open until %1 Offline Unconfirmed Confirming (%1 of %2 recommended confirmations) Confirmed (%1 confirmations) Conflicted Immature (%1 confirmations, will be available after %2) This block was not received by any other nodes and will probably not be accepted! Generated but not accepted Received with Received from Received via Darksend Sent to Payment to yourself Mined Darksend Denominate Darksend Collateral Payment Darksend Split Up Large Inputs Darksent (n/a) Transaction status. Hover over this field to show number of confirmations. Date and time that the transaction was received. Type of transaction. Destination address of transaction. Amount removed from or added to balance. TransactionView All Today This week This month Last month This year Range... Received with Sent to Darksent Darksend Denominate To yourself Mined Other Enter address or label to search Min amount Copy address Copy label Copy amount Copy transaction ID Edit label Show transaction details Export Transaction History Comma separated file (*.csv) Fail yang dipisahkan dengan koma Confirmed Date Type Label Address Alamat Amount ID Exporting Failed There was an error trying to save the transaction history to %1. Exporting Successful The transaction history was successfully saved to %1. Range: to WalletFrame No wallet has been loaded. WalletModel Send Coins WalletView &Export &Eksport Export the data in the current tab to a file Backup Wallet Wallet Data (*.dat) Backup Failed There was an error trying to save the wallet data to %1. Backup Successful The wallet data was successfully saved to %1. darkcoin-core %s, you must set a rpcpassword in the configuration file: %s It is recommended you use the following random password: rpcuser=darkcoinrpc rpcpassword=%s (you do not need to remember this password) The username and password MUST NOT be the same. If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %%s | mail -s "Darkcoin Alert" admin@foo.com Acceptable ciphers (default: TLSv1.2+HIGH:TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!3DES:@STRENGTH) An error occurred while setting up the RPC port %u for listening on IPv4: %s An error occurred while setting up the RPC port %u for listening on IPv6, falling back to IPv4: %s Bind to given address and always listen on it. Use [host]:port notation for IPv6 Cannot obtain a lock on data directory %s. Darkcoin Core is probably already running. Continuously rate-limit free transactions to <n>*1000 bytes per minute (default:15) Disable all Masternode and Darksend related functionality (0-1, default: 0) Enable instantx, show confirmations for locked transactions (bool, default: true) Enable use of automated darksend for funds stored in this wallet (0-1, default: 0) Enter regression test mode, which uses a special chain in which blocks can be solved instantly. This is intended for regression testing tools and app development. Enter regression test mode, which uses a special chain in which blocks can be solved instantly. Error: Listening for incoming connections failed (listen returned error %s) Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds! Error: Wallet unlocked for anonymization only, unable to create transaction. Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message) Execute command when a wallet transaction changes (%s in cmd is replaced by TxID) Execute command when the best block changes (%s in cmd is replaced by block hash) Fees smaller than this are considered zero fee (for transaction creation) (default: Flush database activity from memory pool to disk log every <n> megabytes (default: 100) Found unconfirmed denominated outputs, will wait till they confirm to continue. How thorough the block verification of -checkblocks is (0-4, default: 3) In this mode -genproclimit controls how many blocks are generated immediately. Listen for JSON-RPC connections on <port> (default: 9998 or testnet: 19998) Name to construct url for KeePass entry that stores the wallet passphrase Number of seconds to keep misbehaving peers from reconnecting (default: 86400) Output debugging information (default: 0, supplying <category> is optional) Provide liquidity to Darksend by infrequently mixing coins on a continual basis (0-100, default: 0, 1=very frequent, high fees, 100=very infrequent, low fees) Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect) Set external address:port to get to this masternode (example: address:port) Set maximum size of high-priority/low-fee transactions in bytes (default: %d) Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d) Set the processor limit for when generation is on (-1 = unlimited, default: -1) Show N confirmations for a successfully locked transaciton (0-9999, default: 1) This is a pre-release test build - use at your own risk - do not use for mining or merchant applications Unable to bind to %s on this computer. Darkcoin Core is probably already running. Unable to locate enough Darksend non-denominated funds for this transaction that are not equal 1000 DRK Unable to locate enough Darksend non-denominated funds for this transaction Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: -proxy) Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction. Warning: Please check that your computer's date and time are correct! If your clock is wrong Darkcoin will not work properly. Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues. Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade. Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect. Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup. You must set rpcpassword=<password> in the configuration file: %s If the file does not exist, create it with owner-readable-only file permissions. You must specify a masternodeprivkey in the configuration. Please see documentation for help. (default: 1) (default: wallet.dat) <category> can be: Accept command line and JSON-RPC commands Accept connections from outside (default: 1 if no -proxy or -connect) Add a node to connect to and attempt to keep the connection open Allow DNS lookups for -addnode, -seednode and -connect Allow JSON-RPC connections from specified IP address Already have that input. Always query for peer addresses via DNS lookup (default: 0) Attempt to recover private keys from a corrupt wallet.dat Block creation options: Can't denominate: no compatible inputs left. Cannot downgrade wallet Cannot resolve -bind address: '%s' Cannot resolve -externalip address: '%s' Cannot write default address Clear list of wallet transactions (diagnostic tool; implies -rescan) Collateral is not valid. Collateral not valid. Connect only to the specified node(s) Connect through SOCKS proxy Connect to JSON-RPC on <port> (default: 9998 or testnet: 19998) Connect to KeePassHttp on port <port> (default: 19455) Connect to a node to retrieve peer addresses, and disconnect Connection options: Corrupted block database detected Darkcoin Core Daemon Darkcoin Core RPC client version Darksend is disabled. Darksend options: Debugging/Testing options: Disable safemode, override a real safe mode event (default: 0) Discover own IP address (default: 1 when listening and no -externalip) Do not load the wallet and disable wallet RPC calls Do you want to rebuild the block database now? Done loading Enable the client to act as a masternode (0-1, default: 0) Entries are full. Error connecting to masternode. Error initializing block database Error initializing wallet database environment %s! Error loading block database Error loading wallet.dat Error loading wallet.dat: Wallet corrupted Error loading wallet.dat: Wallet requires newer version of Darkcoin Error opening block database Error reading from database, shutting down. Error recovering public key. Error Error: Disk space is low! Error: Wallet locked, unable to create transaction! Error: You already have pending entries in the Darksend pool Error: system error: Failed to listen on any port. Use -listen=0 if you want this. Failed to read block info Failed to read block Failed to sync block index Failed to write block index Failed to write block info Failed to write block Failed to write file info Failed to write to coin database Failed to write transaction index Failed to write undo data Fee per kB to add to transactions you send Fees smaller than this are considered zero fee (for relaying) (default: Force safe mode (default: 0) Generate coins (default: 0) Get help for a command How many blocks to check at startup (default: 288, 0 = all) If <category> is not supplied, output all debugging information. Ignore masternodes less than version (example: 70050; default : 0) Importing... Imports blocks from external blk000??.dat file Incompatible mode. Incompatible version. Incorrect or no genesis block found. Wrong datadir for network? Information Initialization sanity check failed. Darkcoin Core is shutting down. Input is not valid. InstantX options: Insufficient funds Invalid -onion address: '%s' Invalid -proxy address: '%s' Invalid amount for -minrelaytxfee=<amount>: '%s' Invalid amount for -mintxfee=<amount>: '%s' Invalid amount for -paytxfee=<amount>: '%s' Invalid amount Invalid masternodeprivkey. Please see documenation. Invalid private key. Invalid script detected. KeePassHttp id for the established association KeePassHttp key for AES encrypted communication with KeePass Keep N darkcoin anonymized (default: 0) Keep at most <n> unconnectable blocks in memory (default: %u) Keep at most <n> unconnectable transactions in memory (default: %u) Last Darksend was too recent. Last successful darksend action was too recent. Limit size of signature cache to <n> entries (default: 50000) List commands Listen for connections on <port> (default: 9999 or testnet: 19999) Loading addresses... Loading block index... Loading wallet... (%3.2f %%) Loading wallet... Log transaction priority and fee per kB when mining blocks (default: 0) Maintain a full transaction index (default: 0) Maintain at most <n> connections to peers (default: 125) Masternode options: Masternode queue is full. Masternode: Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000) Maximum per-connection send buffer, <n>*1000 bytes (default: 1000) Missing input transaction information. No compatible masternode found. No funds detected in need of denominating. No masternodes detected. No matching denominations found for mixing. Non-standard public key detected. Not compatible with existing transactions. Not enough file descriptors available. Not in the masternode list. Only accept block chain matching built-in checkpoints (default: 1) Only connect to nodes in network <net> (IPv4, IPv6 or Tor) Options: Password for JSON-RPC connections Prepend debug output with timestamp (default: 1) Print block on startup, if found in block index Print block tree on startup (default: 0) RPC SSL options: (see the Bitcoin Wiki for SSL setup instructions) RPC client options: RPC server options: Randomly drop 1 of every <n> network messages Randomly fuzz 1 of every <n> network messages Rebuild block chain index from current blk000??.dat files Rescan the block chain for missing wallet transactions Rescanning... Run a thread to flush wallet periodically (default: 1) Run in the background as a daemon and accept commands SSL options: (see the Bitcoin Wiki for SSL setup instructions) Select SOCKS version for -proxy (4 or 5, default: 5) Send command to Darkcoin Core Send commands to node running on <ip> (default: 127.0.0.1) Send trace/debug info to console instead of debug.log file Server certificate file (default: server.cert) Server private key (default: server.pem) Session not complete! Session timed out (30 seconds), please resubmit. Set database cache size in megabytes (%d to %d, default: %d) Set key pool size to <n> (default: 100) Set maximum block size in bytes (default: %d) Set minimum block size in bytes (default: 0) Set the masternode private key Set the number of threads to service RPC calls (default: 4) Sets the DB_PRIVATE flag in the wallet db environment (default: 1) Show all debugging options (usage: --help -help-debug) Show benchmark information (default: 0) Shrink debug.log file on client startup (default: 1 when no -debug) Signing failed. Signing timed out, please resubmit. Signing transaction failed Specify configuration file (default: darkcoin.conf) Specify connection timeout in milliseconds (default: 5000) Specify data directory Specify masternode configuration file (default: masternode.conf) Specify pid file (default: darkcoind.pid) Specify wallet file (within data directory) Specify your own public address Spend unconfirmed change when sending transactions (default: 1) Start Darkcoin Core Daemon System error: This help message This is intended for regression testing tools and app development. This is not a masternode. Threshold for disconnecting misbehaving peers (default: 100) To use the %s option Transaction amount too small Transaction amounts must be positive Transaction created successfully. Transaction fees are too high. Transaction not valid. Transaction too large Unable to bind to %s on this computer (bind returned error %s) Unable to locate enough Darksend denominated funds for this transaction Unable to sign masternode payment winner, wrong key? Unknown -socks proxy version requested: %i Unknown network specified in -onlynet: '%s' Upgrade wallet to latest format Usage (deprecated, use darkcoin-cli): Usage: Use KeePass 2 integration using KeePassHttp plugin (default: 0) Use N separate masternodes to anonymize funds (2-8, default: 2) Use OpenSSL (https) for JSON-RPC connections Use UPnP to map the listening port (default: 0) Use UPnP to map the listening port (default: 1 when listening) Use the test network Username for JSON-RPC connections Value more than Darksend pool maximum allows. Verifying blocks... Verifying wallet... Wait for RPC server to start Wallet %s resides outside data directory %s Wallet is locked. Wallet needed to be rewritten: restart Darkcoin to complete Wallet options: Warning Warning: Deprecated argument -debugnet ignored, use -debug=net Warning: This version is obsolete, upgrade required! Wrong state. You need to rebuild the database using -reindex to change -txindex Zapping all transactions from wallet... on startup version wallet.dat corrupt, salvage failed