dash/src/chainparamsbase.cpp

79 lines
6.7 KiB
C++
Raw Permalink Normal View History

// Copyright (c) 2010 Satoshi Nakamoto
// Copyright (c) 2009-2015 The Bitcoin Core developers
// Distributed under the MIT software license, see the accompanying
// file COPYING or http://www.opensource.org/licenses/mit-license.php.
Backport 11651 (#3358) * scripted-diff: Replace #include "" with #include <> (ryanofsky) -BEGIN VERIFY SCRIPT- for f in \ src/*.cpp \ src/*.h \ src/bench/*.cpp \ src/bench/*.h \ src/compat/*.cpp \ src/compat/*.h \ src/consensus/*.cpp \ src/consensus/*.h \ src/crypto/*.cpp \ src/crypto/*.h \ src/crypto/ctaes/*.h \ src/policy/*.cpp \ src/policy/*.h \ src/primitives/*.cpp \ src/primitives/*.h \ src/qt/*.cpp \ src/qt/*.h \ src/qt/test/*.cpp \ src/qt/test/*.h \ src/rpc/*.cpp \ src/rpc/*.h \ src/script/*.cpp \ src/script/*.h \ src/support/*.cpp \ src/support/*.h \ src/support/allocators/*.h \ src/test/*.cpp \ src/test/*.h \ src/wallet/*.cpp \ src/wallet/*.h \ src/wallet/test/*.cpp \ src/wallet/test/*.h \ src/zmq/*.cpp \ src/zmq/*.h do base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f done -END VERIFY SCRIPT- Signed-off-by: Pasta <pasta@dashboost.org> * scripted-diff: Replace #include "" with #include <> (Dash Specific) -BEGIN VERIFY SCRIPT- for f in \ src/bls/*.cpp \ src/bls/*.h \ src/evo/*.cpp \ src/evo/*.h \ src/governance/*.cpp \ src/governance/*.h \ src/llmq/*.cpp \ src/llmq/*.h \ src/masternode/*.cpp \ src/masternode/*.h \ src/privatesend/*.cpp \ src/privatesend/*.h do base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f done -END VERIFY SCRIPT- Signed-off-by: Pasta <pasta@dashboost.org> * build: Remove -I for everything but project root Remove -I from build system for everything but the project root, and built-in dependencies. Signed-off-by: Pasta <pasta@dashboost.org> # Conflicts: # src/Makefile.test.include * qt: refactor: Use absolute include paths in .ui files * qt: refactor: Changes to make include paths absolute This makes all include paths in the GUI absolute. Many changes are involved as every single source file in src/qt/ assumes to be able to use relative includes. Signed-off-by: Pasta <pasta@dashboost.org> # Conflicts: # src/qt/dash.cpp # src/qt/optionsmodel.cpp # src/qt/test/rpcnestedtests.cpp * test: refactor: Use absolute include paths for test data files * Recommend #include<> syntax in developer notes * refactor: Include obj/build.h instead of build.h * END BACKPORT #11651 Remove trailing whitespace causing travis failure * fix backport 11651 Signed-off-by: Pasta <pasta@dashboost.org> * More of 11651 * fix blockchain.cpp Signed-off-by: pasta <pasta@dashboost.org> * Add missing "qt/" in includes * Add missing "test/" in includes * Fix trailing whitespaces Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com> Co-authored-by: Russell Yanofsky <russ@yanofsky.org> Co-authored-by: MeshCollider <dobsonsa68@gmail.com> Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
2020-03-19 23:46:56 +01:00
#include <chainparamsbase.h>
Backport 11651 (#3358) * scripted-diff: Replace #include "" with #include <> (ryanofsky) -BEGIN VERIFY SCRIPT- for f in \ src/*.cpp \ src/*.h \ src/bench/*.cpp \ src/bench/*.h \ src/compat/*.cpp \ src/compat/*.h \ src/consensus/*.cpp \ src/consensus/*.h \ src/crypto/*.cpp \ src/crypto/*.h \ src/crypto/ctaes/*.h \ src/policy/*.cpp \ src/policy/*.h \ src/primitives/*.cpp \ src/primitives/*.h \ src/qt/*.cpp \ src/qt/*.h \ src/qt/test/*.cpp \ src/qt/test/*.h \ src/rpc/*.cpp \ src/rpc/*.h \ src/script/*.cpp \ src/script/*.h \ src/support/*.cpp \ src/support/*.h \ src/support/allocators/*.h \ src/test/*.cpp \ src/test/*.h \ src/wallet/*.cpp \ src/wallet/*.h \ src/wallet/test/*.cpp \ src/wallet/test/*.h \ src/zmq/*.cpp \ src/zmq/*.h do base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f done -END VERIFY SCRIPT- Signed-off-by: Pasta <pasta@dashboost.org> * scripted-diff: Replace #include "" with #include <> (Dash Specific) -BEGIN VERIFY SCRIPT- for f in \ src/bls/*.cpp \ src/bls/*.h \ src/evo/*.cpp \ src/evo/*.h \ src/governance/*.cpp \ src/governance/*.h \ src/llmq/*.cpp \ src/llmq/*.h \ src/masternode/*.cpp \ src/masternode/*.h \ src/privatesend/*.cpp \ src/privatesend/*.h do base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f done -END VERIFY SCRIPT- Signed-off-by: Pasta <pasta@dashboost.org> * build: Remove -I for everything but project root Remove -I from build system for everything but the project root, and built-in dependencies. Signed-off-by: Pasta <pasta@dashboost.org> # Conflicts: # src/Makefile.test.include * qt: refactor: Use absolute include paths in .ui files * qt: refactor: Changes to make include paths absolute This makes all include paths in the GUI absolute. Many changes are involved as every single source file in src/qt/ assumes to be able to use relative includes. Signed-off-by: Pasta <pasta@dashboost.org> # Conflicts: # src/qt/dash.cpp # src/qt/optionsmodel.cpp # src/qt/test/rpcnestedtests.cpp * test: refactor: Use absolute include paths for test data files * Recommend #include<> syntax in developer notes * refactor: Include obj/build.h instead of build.h * END BACKPORT #11651 Remove trailing whitespace causing travis failure * fix backport 11651 Signed-off-by: Pasta <pasta@dashboost.org> * More of 11651 * fix blockchain.cpp Signed-off-by: pasta <pasta@dashboost.org> * Add missing "qt/" in includes * Add missing "test/" in includes * Fix trailing whitespaces Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com> Co-authored-by: Russell Yanofsky <russ@yanofsky.org> Co-authored-by: MeshCollider <dobsonsa68@gmail.com> Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
2020-03-19 23:46:56 +01:00
#include <tinyformat.h>
merge bitcoin#14555: Move util files to directory (script modified to account for Dash backports, doesn't account for rebasing) ------------- BEGIN SCRIPT --------------- mkdir -p src/util git mv src/util.h src/util/system.h git mv src/util.cpp src/util/system.cpp git mv src/utilmemory.h src/util/memory.h git mv src/utilmoneystr.h src/util/moneystr.h git mv src/utilmoneystr.cpp src/util/moneystr.cpp git mv src/utilstrencodings.h src/util/strencodings.h git mv src/utilstrencodings.cpp src/util/strencodings.cpp git mv src/utiltime.h src/util/time.h git mv src/utiltime.cpp src/util/time.cpp git mv src/utilasmap.h src/util/asmap.h git mv src/utilasmap.cpp src/util/asmap.cpp git mv src/utilstring.h src/util/string.h git mv src/utilstring.cpp src/util/string.cpp gsed -i 's/<util\.h>/<util\/system\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp') gsed -i 's/<utilmemory\.h>/<util\/memory\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp') gsed -i 's/<utilmoneystr\.h>/<util\/moneystr\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp') gsed -i 's/<utilstrencodings\.h>/<util\/strencodings\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp') gsed -i 's/<utiltime\.h>/<util\/time\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp') gsed -i 's/<utilasmap\.h>/<util\/asmap\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp') gsed -i 's/<utilstring\.h>/<util\/string\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp') gsed -i 's/BITCOIN_UTIL_H/BITCOIN_UTIL_SYSTEM_H/g' src/util/system.h gsed -i 's/BITCOIN_UTILMEMORY_H/BITCOIN_UTIL_MEMORY_H/g' src/util/memory.h gsed -i 's/BITCOIN_UTILMONEYSTR_H/BITCOIN_UTIL_MONEYSTR_H/g' src/util/moneystr.h gsed -i 's/BITCOIN_UTILSTRENCODINGS_H/BITCOIN_UTIL_STRENCODINGS_H/g' src/util/strencodings.h gsed -i 's/BITCOIN_UTILTIME_H/BITCOIN_UTIL_TIME_H/g' src/util/time.h gsed -i 's/BITCOIN_UTILASMAP_H/BITCOIN_UTIL_ASMAP_H/g' src/util/asmap.h gsed -i 's/BITCOIN_UTILSTRING_H/BITCOIN_UTIL_STRING_H/g' src/util/string.h gsed -i 's/ util\.\(h\|cpp\)/ util\/system\.\1/g' src/Makefile.am gsed -i 's/utilmemory\.\(h\|cpp\)/util\/memory\.\1/g' src/Makefile.am gsed -i 's/utilmoneystr\.\(h\|cpp\)/util\/moneystr\.\1/g' src/Makefile.am gsed -i 's/utilstrencodings\.\(h\|cpp\)/util\/strencodings\.\1/g' src/Makefile.am gsed -i 's/utiltime\.\(h\|cpp\)/util\/time\.\1/g' src/Makefile.am gsed -i 's/utilasmap\.\(h\|cpp\)/util\/asmap\.\1/g' src/Makefile.am gsed -i 's/utilstring\.\(h\|cpp\)/util\/string\.\1/g' src/Makefile.am gsed -i 's/-> util ->/-> util\/system ->/' test/lint/lint-circular-dependencies.sh gsed -i 's/src\/util\.cpp/src\/util\/system\.cpp/g' test/lint/lint-format-strings.py test/lint/lint-locale-dependence.sh gsed -i 's/src\/utilmoneystr\.cpp/src\/util\/moneystr\.cpp/g' test/lint/lint-locale-dependence.sh gsed -i 's/src\/utilstrencodings\.\(h\|cpp\)/src\/util\/strencodings\.\1/g' test/lint/lint-locale-dependence.sh ------------- END SCRIPT ---------------
2021-06-27 08:33:13 +02:00
#include <util/system.h>
2014-08-28 22:56:53 +02:00
#include <assert.h>
const std::string CBaseChainParams::MAIN = "main";
const std::string CBaseChainParams::TESTNET = "test";
const std::string CBaseChainParams::DEVNET = "devnet";
const std::string CBaseChainParams::REGTEST = "regtest";
void SetupChainParamsBaseOptions(ArgsManager& argsman)
{
argsman.AddArg("-budgetparams=<masternode>:<budget>:<superblock>", "Override masternode, budget and superblock start heights (regtest-only)", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-devnet=<name>", "Use devnet chain with provided name", ArgsManager::ALLOW_ANY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-dip3params=<activation>:<enforcement>", "Override DIP3 activation and enforcement heights (regtest-only)", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-dip8params=<activation>", "Override DIP8 activation height (regtest-only)", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-highsubsidyblocks=<n>", "The number of blocks with a higher than normal subsidy to mine at the start of a chain. Block after that height will have fixed subsidy base. (default: 0, devnet-only)", ArgsManager::ALLOW_ANY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-highsubsidyfactor=<n>", "The factor to multiply the normal block subsidy by while in the highsubsidyblocks window of a chain (default: 1, devnet-only)", ArgsManager::ALLOW_ANY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-llmqchainlocks=<quorum name>", "Override the default LLMQ type used for ChainLocks. Allows using ChainLocks with smaller LLMQs. (default: llmq_devnet, devnet-only)", ArgsManager::ALLOW_ANY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-llmqdevnetparams=<size>:<threshold>", "Override the default LLMQ size for the LLMQ_DEVNET quorum (default: 3:2, devnet-only)", ArgsManager::ALLOW_ANY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-llmqinstantsend=<quorum name>", "Override the default LLMQ type used for InstantSend. Allows using InstantSend with smaller LLMQs. (default: llmq_devnet, devnet-only)", ArgsManager::ALLOW_ANY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-llmqinstantsenddip0024=<quorum name>", "Override the default LLMQ type used for InstantSendDIP0024. (default: llmq_devnet_dip0024, devnet-only)", ArgsManager::ALLOW_ANY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-llmqplatform=<quorum name>", "Override the default LLMQ type used for Platform. (default: llmq_devnet_platform, devnet-only)", ArgsManager::ALLOW_ANY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-llmqmnhf=<quorum name>", "Override the default LLMQ type used for EHF. (default: llmq_devnet, devnet-only)", ArgsManager::ALLOW_ANY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-llmqtestinstantsend=<quorum name>", "Override the default LLMQ type used for InstantSend. Used mainly to test Platform. (default: llmq_test_instantsend, regtest-only)", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-llmqtestinstantsenddip0024=<quorum name>", "Override the default LLMQ type used for InstantSendDIP0024. Used mainly to test Platform. (default: llmq_test_dip0024, regtest-only)", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-llmqtestinstantsendparams=<size>:<threshold>", "Override the default LLMQ size for the LLMQ_TEST_INSTANTSEND quorums (default: 3:2, regtest-only)", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-llmqtestparams=<size>:<threshold>", "Override the default LLMQ size for the LLMQ_TEST quorum (default: 3:2, regtest-only)", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-powtargetspacing=<n>", "Override the default PowTargetSpacing value in seconds (default: 2.5 minutes, devnet-only)", ArgsManager::ALLOW_INT, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-minimumdifficultyblocks=<n>", "The number of blocks that can be mined with the minimum difficulty at the start of a chain (default: 0, devnet-only)", ArgsManager::ALLOW_ANY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-chain=<chain>", "Use the chain <chain> (default: main). Allowed values: main, test, regtest", ArgsManager::ALLOW_ANY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-regtest", "Enter regression test mode, which uses a special chain in which blocks can be solved instantly. "
"This is intended for regression testing tools and app development. Equivalent to -chain=regtest", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-testnet", "Use the test chain. Equivalent to -chain=test", ArgsManager::ALLOW_ANY, OptionsCategory::CHAINPARAMS);
argsman.AddArg("-vbparams=<deployment>:<start>:<end>(:<window>:<threshold/thresholdstart>(:<thresholdmin>:<falloffcoeff>:<mnactivation>))",
"Use given start/end times for specified version bits deployment (regtest-only). "
"Specifying window, threshold/thresholdstart, thresholdmin, falloffcoeff and mnactivation is optional.", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::CHAINPARAMS);
}
static std::unique_ptr<CBaseChainParams> globalChainBaseParams;
const CBaseChainParams& BaseParams()
{
assert(globalChainBaseParams);
return *globalChainBaseParams;
}
/**
* Port numbers for incoming Tor connections (9996, 19996, 19796, 19896) have
* been chosen arbitrarily to keep ranges of used ports tight.
*/
std::unique_ptr<CBaseChainParams> CreateBaseChainParams(const std::string& chain)
{
if (chain == CBaseChainParams::MAIN)
return std::make_unique<CBaseChainParams>("", 9998, 9996);
else if (chain == CBaseChainParams::TESTNET)
return std::make_unique<CBaseChainParams>("testnet3", 19998, 19996);
else if (chain == CBaseChainParams::DEVNET)
return std::make_unique<CBaseChainParams>(gArgs.GetDevNetName(), 19798, 19796);
else if (chain == CBaseChainParams::REGTEST)
return std::make_unique<CBaseChainParams>("regtest", 19898, 19896);
else
throw std::runtime_error(strprintf("%s: Unknown chain %s.", __func__, chain));
}
void SelectBaseParams(const std::string& chain)
{
globalChainBaseParams = CreateBaseChainParams(chain);
Merge #11862: Network specific conf sections c25321f Add config changes to release notes (Anthony Towns) 5e3cbe0 [tests] Unit tests for -testnet/-regtest in [test]/[regtest] sections (Anthony Towns) 005ad26 ArgsManager: special handling for -regtest and -testnet (Anthony Towns) 608415d [tests] Unit tests for network-specific config entries (Anthony Towns) 68797e2 ArgsManager: Warn when ignoring network-specific config setting (Anthony Towns) d1fc4d9 ArgsManager: limit some options to only apply on mainnet when in default section (Anthony Towns) 8a9817d [tests] Use regtest section in functional tests configs (Anthony Towns) 30f9407 [tests] Unit tests for config file sections (Anthony Towns) 95eb66d ArgsManager: support config file sections (Anthony Towns) 4d34fcc ArgsManager: drop m_negated_args (Anthony Towns) 3673ca3 ArgsManager: keep command line and config file arguments separate (Anthony Towns) Pull request description: The weekly meeting on [2017-12-07](http://www.erisian.com.au/meetbot/bitcoin-core-dev/2017/bitcoin-core-dev.2017-12-07-19.00.log.html) discussed allowing options to bitcoin to have some sensitivity to what network is in use. @theuni suggested having sections in the config file: <cfields> an alternative to that would be sections in a config file. and on the cmdline they'd look like namespaces. so, [testnet] port=5. or -testnet::port=5. This approach is (more or less) supported by `boost::program_options::detail::config_file_iterator` -- when it sees a `[testnet]` section with `port=5`, it will treat that the same as "testnet.port=5". So `[testnet] port=5` (or `testnet.port=5` without the section header) in bitcoin.conf and `-testnet.port=5` on the command line. The other aspect to this question is possibly limiting some options so that there is no possibility of accidental cross-contamination across networks. For example, if you're using a particular wallet.dat on mainnet, you may not want to accidentally use the same wallet on testnet and risk reusing keys. I've set this up so that the `-addnode` and `-wallet` options are `NETWORK_ONLY`, so that if you have a bitcoin.conf: wallet=/secret/wallet.dat upnp=1 and you run `bitcoind -testnet` or `bitcoind -regtest`, then the `wallet=` setting will be ignored, and should behave as if your bitcoin.conf had specified: upnp=1 [main] wallet=/secret/wallet.dat For any `NETWORK_ONLY` options, if you're using `-testnet` or `-regtest`, you'll have to add the prefix to any command line options. This was necessary for `multiwallet.py` for instance. I've left the "default" options as taking precedence over network specific ones, which might be backwards. So if you have: maxmempool=200 [regtest] maxmempool=100 your maxmempool will still be 200 on regtest. The advantage of doing it this way is that if you have `[regtest] maxmempool=100` in bitcoin.conf, and then say `bitcoind -regtest -maxmempool=200`, the same result is probably in line with what you expect... The other thing to note is that I'm using the chain names from `chainparamsbase.cpp` / `ChainNameFromCommandLine`, so the sections are `[main]`, `[test]` and `[regtest]`; not `[mainnet]` or `[testnet]` as might be expected. Thoughts? Ping @MeshCollider @laanwj @jonasschnelli @morcos Tree-SHA512: f00b5eb75f006189987e5c15e154a42b66ee251777768c1e185d764279070fcb7c41947d8794092b912a03d985843c82e5189871416995436a6260520fb7a4db
2020-04-29 14:50:51 +02:00
gArgs.SelectConfigNetwork(chain);
}