dash/doc/build-unix.md

UNIX BUILD NOTES
====================
Some notes on how to build Dash Core in Unix.

(For BSD specific instructions, see `build-*bsd.md` in this directory.)

Note
---------------------
Always use absolute paths to configure and compile Dash Core and the dependencies.
For example, when specifying the path of the dependency:

```sh
../dist/configure --enable-cxx --disable-shared --with-pic --prefix=$BDB_PREFIX
```

Here `BDB_PREFIX` must be an absolute path - it is defined using $(pwd) which ensures
the usage of the absolute path.

To Build
---------------------

```sh
./autogen.sh
./configure
make
make install # optional
```

This will build dash-qt as well, if the dependencies are met.

Dependencies
---------------------

These dependencies are required:

 Library     | Purpose          | Description
 ------------|------------------|----------------------
 libboost    | Utility          | Library for threading, data structures, etc
 libevent    | Networking       | OS independent asynchronous networking

Optional dependencies:

 Library     | Purpose          | Description
 ------------|------------------|----------------------
 gmp         | Optimized math routines | Arbitrary precision arithmetic library
 miniupnpc   | UPnP Support     | Firewall-jumping support
 libnatpmp   | NAT-PMP Support  | Firewall-jumping support
 libdb4.8    | Berkeley DB      | Optional, wallet storage (only needed when legacy wallet enabled)
 qt          | GUI              | GUI toolkit (only needed when GUI enabled)
 libqrencode | QR codes in GUI  | Optional for generating QR codes (only needed when GUI enabled)
 libzmq3     | ZMQ notification | Optional, allows generating ZMQ notifications (requires ZMQ version >= 4.0.0)
 sqlite3     | SQLite DB        | Optional, wallet storage (only needed when descriptor wallet enabled)

For the versions used, see [dependencies.md](dependencies.md)

Memory Requirements
--------------------

C++ compilers are memory-hungry. It is recommended to have at least 1.5 GB of
memory available when compiling Dash Core. On systems with less, gcc can be
tuned to conserve memory with additional CXXFLAGS:


```sh
./configure CXXFLAGS="--param ggc-min-expand=1 --param ggc-min-heapsize=32768"
```


## Linux Distribution Specific Instructions

### Ubuntu & Debian

#### Dependency Build Instructions

Build requirements:

```sh
sudo apt-get install build-essential libtool autotools-dev automake pkg-config bsdmainutils bison python3
```

Now, you can either build from self-compiled [depends](/depends/README.md) or install the required dependencies:

```sh
sudo apt-get install libevent-dev libboost-dev libboost-system-dev libboost-filesystem-dev libboost-test-dev
```

SQLite is required for the descriptor wallet:

```sh
sudo apt-get install libsqlite3-dev
```

Berkeley DB is required for the legacy wallet. Ubuntu and Debian have their own `libdb-dev` and `libdb++-dev` packages,
but these will install Berkeley DB 5.1 or later. This will break binary wallet compatibility with the distributed
executables, which are based on BerkeleyDB 4.8. If you do not care about wallet compatibility, pass
`--with-incompatible-bdb` to configure. Otherwise, you can build Berkeley DB [yourself](#berkeley-db).

To build Dash Core without wallet, see [*Disable-wallet mode*](#disable-wallet-mode)

Optional port mapping libraries (see: `--with-miniupnpc` and `--with-natpmp`):

```sh
sudo apt-get install libminiupnpc-dev libnatpmp-dev
```

ZMQ dependencies (provides ZMQ API):

```sh
sudo apt-get install libzmq3-dev
```

GMP dependencies (provides platform-optimized routines):

```sh
sudo apt-get install libgmp-dev
```

GUI dependencies:

If you want to build dash-qt, make sure that the required packages for Qt development
are installed. Qt 5 is necessary to build the GUI.
To build without GUI pass `--without-gui`.

To build with Qt 5 you need the following:

```sh
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools
```

Additionally, to support Wayland protocol for modern desktop environments:

```sh
sudo apt-get install qtwayland5
```

libqrencode (optional) can be installed with:

```sh
sudo apt-get install libqrencode-dev
```

Once these are installed, they will be found by configure and a dash-qt executable will be
built by default.


### Fedora

#### Dependency Build Instructions

Build requirements:

```sh
sudo dnf install gcc-c++ libtool make autoconf automake python3
```

Now, you can either build from self-compiled [depends](/depends/README.md) or install the required dependencies:

```sh
sudo dnf install libevent-devel boost-devel
```

SQLite is required for the descriptor wallet:

```sh
sudo dnf install sqlite-devel
```

Berkeley DB is required for the legacy wallet:

```sh
sudo dnf install libdb4-devel libdb4-cxx-devel
```

Newer Fedora releases, since Fedora 33, have only `libdb-devel` and `libdb-cxx-devel` packages, but these will install
Berkeley DB 5.3 or later. This will break binary wallet compatibility with the distributed executables, which
are based on Berkeley DB 4.8. If you do not care about wallet compatibility,
pass `--with-incompatible-bdb` to configure. Otherwise, you can build Berkeley DB [yourself](#berkeley-db).

To build Dash Core without wallet, see [*Disable-wallet mode*](#disable-wallet-mode)

Optional port mapping libraries (see: `--with-miniupnpc` and `--with-natpmp`):

```sh
sudo dnf install miniupnpc-devel libnatpmp-devel
```

ZMQ dependencies (provides ZMQ API):

```sh
sudo dnf install zeromq-devel
```

GMP dependencies (provides platform-optimized routines):

```sh
sudo dnf install gmp-devel
```

GUI dependencies:

If you want to build dash-qt, make sure that the required packages for Qt development
are installed. Qt 5 is necessary to build the GUI.
To build without GUI pass `--without-gui`.

To build with Qt 5 you need the following:

```sh
sudo dnf install qt5-qttools-devel qt5-qtbase-devel
```

Additionally, to support Wayland protocol for modern desktop environments:

```sh
sudo dnf install qt5-qtwayland
```

libqrencode (optional) can be installed with:

```sh
sudo dnf install qrencode-devel
```

Once these are installed, they will be found by configure and a dash-qt executable will be
built by default.

Notes
-----
The release is built with GCC and then "strip dashd" to strip the debug
symbols, which reduces the executable size by about 90%.


miniupnpc
---------

[miniupnpc](https://miniupnp.tuxfamily.org) may be used for UPnP port mapping.  It can be downloaded from [here](
https://miniupnp.tuxfamily.org/files/).  UPnP support is compiled in and
turned off by default.

libnatpmp
---------

[libnatpmp](https://miniupnp.tuxfamily.org/libnatpmp.html) may be used for NAT-PMP port mapping. It can be downloaded
from [here](https://miniupnp.tuxfamily.org/files/). NAT-PMP support is compiled in and
turned off by default.

Berkeley DB
-----------

The legacy wallet uses Berkeley DB. To ensure backwards compatibility it is
recommended to use Berkeley DB 4.8. If you have to build it yourself, you can
use [the installation script included in contrib/](/contrib/install_db4.sh)
like so:

```sh
./contrib/install_db4.sh `pwd`
```

from the root of the repository.

Otherwise, you can build Dash Core from self-compiled [depends](/depends/README.md).

**Note**: You only need Berkeley DB if the wallet is enabled (see [*Disable-wallet mode*](#disable-wallet-mode)).

Boost
-----
If you need to build Boost yourself:

    sudo su
    ./bootstrap.sh
    ./bjam install


Security
--------
To help make your Dash Core installation more secure by making certain attacks impossible to
exploit even if a vulnerability is found, binaries are hardened by default.
This can be disabled with:

Hardening Flags:

    ./configure --enable-hardening
    ./configure --disable-hardening


Hardening enables the following features:
* _Position Independent Executable_: Build position independent code to take advantage of Address Space Layout Randomization
    offered by some kernels. Attackers who can cause execution of code at an arbitrary memory
    location are thwarted if they don't know where anything useful is located.
    The stack and heap are randomly located by default, but this allows the code section to be
    randomly located as well.

    On an AMD64 processor where a library was not compiled with -fPIC, this will cause an error
    such as: "relocation R_X86_64_32 against `......' can not be used when making a shared object;"

    To test that you have built PIE executable, install scanelf, part of paxutils, and use:

        scanelf -e ./dashd

    The output should contain:

     TYPE
    ET_DYN

* _Non-executable Stack_: If the stack is executable then trivial stack-based buffer overflow exploits are possible if
    vulnerable buffers are found. By default, Dash Core should be built with a non-executable stack,
    but if one of the libraries it uses asks for an executable stack or someone makes a mistake
    and uses a compiler extension which requires an executable stack, it will silently build an
    executable without the non-executable stack protection.

    To verify that the stack is non-executable after compiling use:
    `scanelf -e ./dashd`

    The output should contain:
    STK/REL/PTL
    RW- R-- RW-

    The STK RW- means that the stack is readable and writeable but not executable.

Disable-wallet mode
--------------------
When the intention is to run only a P2P node without a wallet, Dash Core may be compiled in
disable-wallet mode with:

    ./configure --disable-wallet

In this case there is no dependency on Berkeley DB 4.8 and SQLite.

Mining is also possible in disable-wallet mode using the `getblocktemplate` RPC call.

Additional Configure Flags
--------------------------
A list of additional configure flags can be displayed with:

```sh
./configure --help
```


Setup and Build Example: Arch Linux
-----------------------------------
This example lists the steps necessary to setup and build a command line only, non-wallet distribution of the latest changes on Arch Linux:

```sh
pacman -S git base-devel boost libevent python
git clone https://github.com/dashpay/dash.git
cd dash/
./autogen.sh
./configure --disable-wallet --without-gui --without-miniupnpc
make check
```

Note:
Enabling wallet support requires either compiling against a Berkeley DB newer than 4.8 (package `db`) using `--with-incompatible-bdb`,
or building and depending on a local version of Berkeley DB 4.8. The readily available Arch Linux packages are currently built using
`--with-incompatible-bdb` according to the [PKGBUILD](https://projects.archlinux.org/svntogit/community.git/tree/bitcoin/trunk/PKGBUILD).
As mentioned above, when maintaining portability of the wallet between the standard Dash Core distributions and independently built
node software is desired, Berkeley DB 4.8 must be used.