Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
// Copyright (c) 2009-2010 Satoshi Nakamoto
|
|
|
|
// Copyright (c) 2009-2015 The Bitcoin Core developers
|
|
|
|
// Distributed under the MIT software license, see the accompanying
|
|
|
|
// file COPYING or http://www.opensource.org/licenses/mit-license.php.
|
|
|
|
|
2020-03-19 23:46:56 +01:00
|
|
|
#include <addrdb.h>
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
|
2020-03-19 23:46:56 +01:00
|
|
|
#include <addrman.h>
|
|
|
|
#include <chainparams.h>
|
|
|
|
#include <clientversion.h>
|
|
|
|
#include <hash.h>
|
|
|
|
#include <random.h>
|
|
|
|
#include <streams.h>
|
|
|
|
#include <tinyformat.h>
|
2021-06-27 08:33:13 +02:00
|
|
|
#include <util/system.h>
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
|
2017-06-22 19:40:00 +02:00
|
|
|
namespace {
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
|
2017-06-22 19:40:00 +02:00
|
|
|
template <typename Stream, typename Data>
|
|
|
|
bool SerializeDB(Stream& stream, const Data& data)
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
{
|
2017-06-22 19:40:00 +02:00
|
|
|
// Write and commit header, data
|
|
|
|
try {
|
|
|
|
CHashWriter hasher(SER_DISK, CLIENT_VERSION);
|
2018-03-30 13:10:00 +02:00
|
|
|
stream << Params().MessageStart() << data;
|
|
|
|
hasher << Params().MessageStart() << data;
|
2017-06-22 19:40:00 +02:00
|
|
|
stream << hasher.GetHash();
|
|
|
|
} catch (const std::exception& e) {
|
|
|
|
return error("%s: Serialize or I/O error - %s", __func__, e.what());
|
|
|
|
}
|
|
|
|
|
|
|
|
return true;
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
}
|
|
|
|
|
2017-06-22 19:40:00 +02:00
|
|
|
template <typename Data>
|
|
|
|
bool SerializeFileDB(const std::string& prefix, const fs::path& path, const Data& data)
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
{
|
|
|
|
// Generate random temporary filename
|
|
|
|
unsigned short randv = 0;
|
|
|
|
GetRandBytes((unsigned char*)&randv, sizeof(randv));
|
2017-06-22 19:40:00 +02:00
|
|
|
std::string tmpfn = strprintf("%s.%04x", prefix, randv);
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
|
|
|
|
// open temp output file, and associate with CAutoFile
|
2017-04-06 20:19:21 +02:00
|
|
|
fs::path pathTmp = GetDataDir() / tmpfn;
|
|
|
|
FILE *file = fsbridge::fopen(pathTmp, "wb");
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
CAutoFile fileout(file, SER_DISK, CLIENT_VERSION);
|
2019-07-02 13:55:10 +02:00
|
|
|
if (fileout.IsNull()) {
|
|
|
|
fileout.fclose();
|
|
|
|
remove(pathTmp);
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
return error("%s: Failed to open file %s", __func__, pathTmp.string());
|
2019-07-02 13:55:10 +02:00
|
|
|
}
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
|
2017-06-22 19:40:00 +02:00
|
|
|
// Serialize
|
2019-07-02 13:55:10 +02:00
|
|
|
if (!SerializeDB(fileout, data)) {
|
|
|
|
fileout.fclose();
|
|
|
|
remove(pathTmp);
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
if (!FileCommit(fileout.Get())) {
|
|
|
|
fileout.fclose();
|
|
|
|
remove(pathTmp);
|
2018-04-23 14:29:15 +02:00
|
|
|
return error("%s: Failed to flush file %s", __func__, pathTmp.string());
|
2019-07-02 13:55:10 +02:00
|
|
|
}
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
fileout.fclose();
|
|
|
|
|
2017-06-22 19:40:00 +02:00
|
|
|
// replace existing file, if any, with new file
|
2019-07-02 13:55:10 +02:00
|
|
|
if (!RenameOver(pathTmp, path)) {
|
|
|
|
remove(pathTmp);
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
return error("%s: Rename-into-place failed", __func__);
|
2019-07-02 13:55:10 +02:00
|
|
|
}
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2017-06-22 19:40:00 +02:00
|
|
|
template <typename Stream, typename Data>
|
|
|
|
bool DeserializeDB(Stream& stream, Data& data, bool fCheckSum = true)
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
{
|
|
|
|
try {
|
2017-06-22 19:40:00 +02:00
|
|
|
CHashVerifier<Stream> verifier(&stream);
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
// de-serialize file header (network specific magic number) and ..
|
2017-06-22 19:40:00 +02:00
|
|
|
unsigned char pchMsgTmp[4];
|
2018-03-30 13:10:00 +02:00
|
|
|
verifier >> pchMsgTmp;
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
// ... verify the network matches ours
|
|
|
|
if (memcmp(pchMsgTmp, Params().MessageStart(), sizeof(pchMsgTmp)))
|
|
|
|
return error("%s: Invalid network magic number", __func__);
|
|
|
|
|
2017-06-22 19:40:00 +02:00
|
|
|
// de-serialize data
|
|
|
|
verifier >> data;
|
|
|
|
|
|
|
|
// verify checksum
|
|
|
|
if (fCheckSum) {
|
|
|
|
uint256 hashTmp;
|
|
|
|
stream >> hashTmp;
|
|
|
|
if (hashTmp != verifier.GetHash()) {
|
|
|
|
return error("%s: Checksum mismatch, data corrupted", __func__);
|
|
|
|
}
|
|
|
|
}
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
}
|
|
|
|
catch (const std::exception& e) {
|
|
|
|
return error("%s: Deserialize or I/O error - %s", __func__, e.what());
|
|
|
|
}
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2017-06-22 19:40:00 +02:00
|
|
|
template <typename Data>
|
|
|
|
bool DeserializeFileDB(const fs::path& path, Data& data)
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
{
|
2017-06-22 19:40:00 +02:00
|
|
|
// open input file, and associate with CAutoFile
|
|
|
|
FILE *file = fsbridge::fopen(path, "rb");
|
|
|
|
CAutoFile filein(file, SER_DISK, CLIENT_VERSION);
|
|
|
|
if (filein.IsNull())
|
|
|
|
return error("%s: Failed to open file %s", __func__, path.string());
|
|
|
|
|
|
|
|
return DeserializeDB(filein, data);
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
}
|
|
|
|
|
2017-06-22 19:40:00 +02:00
|
|
|
}
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
|
2017-06-22 19:40:00 +02:00
|
|
|
CBanDB::CBanDB()
|
|
|
|
{
|
|
|
|
pathBanlist = GetDataDir() / "banlist.dat";
|
|
|
|
}
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
|
2017-06-22 19:40:00 +02:00
|
|
|
bool CBanDB::Write(const banmap_t& banSet)
|
|
|
|
{
|
|
|
|
return SerializeFileDB("banlist", pathBanlist, banSet);
|
|
|
|
}
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
|
2017-06-22 19:40:00 +02:00
|
|
|
bool CBanDB::Read(banmap_t& banSet)
|
|
|
|
{
|
|
|
|
return DeserializeFileDB(pathBanlist, banSet);
|
|
|
|
}
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
|
2017-06-22 19:40:00 +02:00
|
|
|
CAddrDB::CAddrDB()
|
|
|
|
{
|
|
|
|
pathAddr = GetDataDir() / "peers.dat";
|
|
|
|
}
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
|
2017-06-22 19:40:00 +02:00
|
|
|
bool CAddrDB::Write(const CAddrMan& addr)
|
|
|
|
{
|
|
|
|
return SerializeFileDB("peers", pathAddr, addr);
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
bool CAddrDB::Read(CAddrMan& addr)
|
|
|
|
{
|
2017-06-22 19:40:00 +02:00
|
|
|
return DeserializeFileDB(pathAddr, addr);
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
bool CAddrDB::Read(CAddrMan& addr, CDataStream& ssPeers)
|
|
|
|
{
|
2017-06-22 19:40:00 +02:00
|
|
|
bool ret = DeserializeDB(ssPeers, addr, false);
|
|
|
|
if (!ret) {
|
|
|
|
// Ensure addrman is left in a clean state
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
addr.Clear();
|
|
|
|
}
|
2017-06-22 19:40:00 +02:00
|
|
|
return ret;
|
Backport Bitcoin PR#8085: p2p: Begin encapsulation (#1537)
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
2017-07-21 11:35:19 +02:00
|
|
|
}
|