dash/src/chainparams.cpp

1080 lines
55 KiB
C++
Raw Normal View History

// Copyright (c) 2010 Satoshi Nakamoto
// Copyright (c) 2009-2014 The Bitcoin Core developers
// Copyright (c) 2014-2020 The Dash Core developers
// Distributed under the MIT software license, see the accompanying
// file COPYING or http://www.opensource.org/licenses/mit-license.php.
Backport 11651 (#3358) * scripted-diff: Replace #include "" with #include <> (ryanofsky) -BEGIN VERIFY SCRIPT- for f in \ src/*.cpp \ src/*.h \ src/bench/*.cpp \ src/bench/*.h \ src/compat/*.cpp \ src/compat/*.h \ src/consensus/*.cpp \ src/consensus/*.h \ src/crypto/*.cpp \ src/crypto/*.h \ src/crypto/ctaes/*.h \ src/policy/*.cpp \ src/policy/*.h \ src/primitives/*.cpp \ src/primitives/*.h \ src/qt/*.cpp \ src/qt/*.h \ src/qt/test/*.cpp \ src/qt/test/*.h \ src/rpc/*.cpp \ src/rpc/*.h \ src/script/*.cpp \ src/script/*.h \ src/support/*.cpp \ src/support/*.h \ src/support/allocators/*.h \ src/test/*.cpp \ src/test/*.h \ src/wallet/*.cpp \ src/wallet/*.h \ src/wallet/test/*.cpp \ src/wallet/test/*.h \ src/zmq/*.cpp \ src/zmq/*.h do base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f done -END VERIFY SCRIPT- Signed-off-by: Pasta <pasta@dashboost.org> * scripted-diff: Replace #include "" with #include <> (Dash Specific) -BEGIN VERIFY SCRIPT- for f in \ src/bls/*.cpp \ src/bls/*.h \ src/evo/*.cpp \ src/evo/*.h \ src/governance/*.cpp \ src/governance/*.h \ src/llmq/*.cpp \ src/llmq/*.h \ src/masternode/*.cpp \ src/masternode/*.h \ src/privatesend/*.cpp \ src/privatesend/*.h do base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f done -END VERIFY SCRIPT- Signed-off-by: Pasta <pasta@dashboost.org> * build: Remove -I for everything but project root Remove -I from build system for everything but the project root, and built-in dependencies. Signed-off-by: Pasta <pasta@dashboost.org> # Conflicts: # src/Makefile.test.include * qt: refactor: Use absolute include paths in .ui files * qt: refactor: Changes to make include paths absolute This makes all include paths in the GUI absolute. Many changes are involved as every single source file in src/qt/ assumes to be able to use relative includes. Signed-off-by: Pasta <pasta@dashboost.org> # Conflicts: # src/qt/dash.cpp # src/qt/optionsmodel.cpp # src/qt/test/rpcnestedtests.cpp * test: refactor: Use absolute include paths for test data files * Recommend #include<> syntax in developer notes * refactor: Include obj/build.h instead of build.h * END BACKPORT #11651 Remove trailing whitespace causing travis failure * fix backport 11651 Signed-off-by: Pasta <pasta@dashboost.org> * More of 11651 * fix blockchain.cpp Signed-off-by: pasta <pasta@dashboost.org> * Add missing "qt/" in includes * Add missing "test/" in includes * Fix trailing whitespaces Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com> Co-authored-by: Russell Yanofsky <russ@yanofsky.org> Co-authored-by: MeshCollider <dobsonsa68@gmail.com> Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
2020-03-19 23:46:56 +01:00
#include <chainparams.h>
#include <consensus/merkle.h>
Backport 11651 (#3358) * scripted-diff: Replace #include "" with #include <> (ryanofsky) -BEGIN VERIFY SCRIPT- for f in \ src/*.cpp \ src/*.h \ src/bench/*.cpp \ src/bench/*.h \ src/compat/*.cpp \ src/compat/*.h \ src/consensus/*.cpp \ src/consensus/*.h \ src/crypto/*.cpp \ src/crypto/*.h \ src/crypto/ctaes/*.h \ src/policy/*.cpp \ src/policy/*.h \ src/primitives/*.cpp \ src/primitives/*.h \ src/qt/*.cpp \ src/qt/*.h \ src/qt/test/*.cpp \ src/qt/test/*.h \ src/rpc/*.cpp \ src/rpc/*.h \ src/script/*.cpp \ src/script/*.h \ src/support/*.cpp \ src/support/*.h \ src/support/allocators/*.h \ src/test/*.cpp \ src/test/*.h \ src/wallet/*.cpp \ src/wallet/*.h \ src/wallet/test/*.cpp \ src/wallet/test/*.h \ src/zmq/*.cpp \ src/zmq/*.h do base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f done -END VERIFY SCRIPT- Signed-off-by: Pasta <pasta@dashboost.org> * scripted-diff: Replace #include "" with #include <> (Dash Specific) -BEGIN VERIFY SCRIPT- for f in \ src/bls/*.cpp \ src/bls/*.h \ src/evo/*.cpp \ src/evo/*.h \ src/governance/*.cpp \ src/governance/*.h \ src/llmq/*.cpp \ src/llmq/*.h \ src/masternode/*.cpp \ src/masternode/*.h \ src/privatesend/*.cpp \ src/privatesend/*.h do base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f done -END VERIFY SCRIPT- Signed-off-by: Pasta <pasta@dashboost.org> * build: Remove -I for everything but project root Remove -I from build system for everything but the project root, and built-in dependencies. Signed-off-by: Pasta <pasta@dashboost.org> # Conflicts: # src/Makefile.test.include * qt: refactor: Use absolute include paths in .ui files * qt: refactor: Changes to make include paths absolute This makes all include paths in the GUI absolute. Many changes are involved as every single source file in src/qt/ assumes to be able to use relative includes. Signed-off-by: Pasta <pasta@dashboost.org> # Conflicts: # src/qt/dash.cpp # src/qt/optionsmodel.cpp # src/qt/test/rpcnestedtests.cpp * test: refactor: Use absolute include paths for test data files * Recommend #include<> syntax in developer notes * refactor: Include obj/build.h instead of build.h * END BACKPORT #11651 Remove trailing whitespace causing travis failure * fix backport 11651 Signed-off-by: Pasta <pasta@dashboost.org> * More of 11651 * fix blockchain.cpp Signed-off-by: pasta <pasta@dashboost.org> * Add missing "qt/" in includes * Add missing "test/" in includes * Fix trailing whitespaces Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com> Co-authored-by: Russell Yanofsky <russ@yanofsky.org> Co-authored-by: MeshCollider <dobsonsa68@gmail.com> Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
2020-03-19 23:46:56 +01:00
#include <tinyformat.h>
#include <util.h>
#include <utilstrencodings.h>
Backport 11651 (#3358) * scripted-diff: Replace #include "" with #include <> (ryanofsky) -BEGIN VERIFY SCRIPT- for f in \ src/*.cpp \ src/*.h \ src/bench/*.cpp \ src/bench/*.h \ src/compat/*.cpp \ src/compat/*.h \ src/consensus/*.cpp \ src/consensus/*.h \ src/crypto/*.cpp \ src/crypto/*.h \ src/crypto/ctaes/*.h \ src/policy/*.cpp \ src/policy/*.h \ src/primitives/*.cpp \ src/primitives/*.h \ src/qt/*.cpp \ src/qt/*.h \ src/qt/test/*.cpp \ src/qt/test/*.h \ src/rpc/*.cpp \ src/rpc/*.h \ src/script/*.cpp \ src/script/*.h \ src/support/*.cpp \ src/support/*.h \ src/support/allocators/*.h \ src/test/*.cpp \ src/test/*.h \ src/wallet/*.cpp \ src/wallet/*.h \ src/wallet/test/*.cpp \ src/wallet/test/*.h \ src/zmq/*.cpp \ src/zmq/*.h do base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f done -END VERIFY SCRIPT- Signed-off-by: Pasta <pasta@dashboost.org> * scripted-diff: Replace #include "" with #include <> (Dash Specific) -BEGIN VERIFY SCRIPT- for f in \ src/bls/*.cpp \ src/bls/*.h \ src/evo/*.cpp \ src/evo/*.h \ src/governance/*.cpp \ src/governance/*.h \ src/llmq/*.cpp \ src/llmq/*.h \ src/masternode/*.cpp \ src/masternode/*.h \ src/privatesend/*.cpp \ src/privatesend/*.h do base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f done -END VERIFY SCRIPT- Signed-off-by: Pasta <pasta@dashboost.org> * build: Remove -I for everything but project root Remove -I from build system for everything but the project root, and built-in dependencies. Signed-off-by: Pasta <pasta@dashboost.org> # Conflicts: # src/Makefile.test.include * qt: refactor: Use absolute include paths in .ui files * qt: refactor: Changes to make include paths absolute This makes all include paths in the GUI absolute. Many changes are involved as every single source file in src/qt/ assumes to be able to use relative includes. Signed-off-by: Pasta <pasta@dashboost.org> # Conflicts: # src/qt/dash.cpp # src/qt/optionsmodel.cpp # src/qt/test/rpcnestedtests.cpp * test: refactor: Use absolute include paths for test data files * Recommend #include<> syntax in developer notes * refactor: Include obj/build.h instead of build.h * END BACKPORT #11651 Remove trailing whitespace causing travis failure * fix backport 11651 Signed-off-by: Pasta <pasta@dashboost.org> * More of 11651 * fix blockchain.cpp Signed-off-by: pasta <pasta@dashboost.org> * Add missing "qt/" in includes * Add missing "test/" in includes * Fix trailing whitespaces Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com> Co-authored-by: Russell Yanofsky <russ@yanofsky.org> Co-authored-by: MeshCollider <dobsonsa68@gmail.com> Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
2020-03-19 23:46:56 +01:00
#include <arith_uint256.h>
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
2014-08-28 22:56:53 +02:00
#include <assert.h>
Backport 11651 (#3358) * scripted-diff: Replace #include "" with #include <> (ryanofsky) -BEGIN VERIFY SCRIPT- for f in \ src/*.cpp \ src/*.h \ src/bench/*.cpp \ src/bench/*.h \ src/compat/*.cpp \ src/compat/*.h \ src/consensus/*.cpp \ src/consensus/*.h \ src/crypto/*.cpp \ src/crypto/*.h \ src/crypto/ctaes/*.h \ src/policy/*.cpp \ src/policy/*.h \ src/primitives/*.cpp \ src/primitives/*.h \ src/qt/*.cpp \ src/qt/*.h \ src/qt/test/*.cpp \ src/qt/test/*.h \ src/rpc/*.cpp \ src/rpc/*.h \ src/script/*.cpp \ src/script/*.h \ src/support/*.cpp \ src/support/*.h \ src/support/allocators/*.h \ src/test/*.cpp \ src/test/*.h \ src/wallet/*.cpp \ src/wallet/*.h \ src/wallet/test/*.cpp \ src/wallet/test/*.h \ src/zmq/*.cpp \ src/zmq/*.h do base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f done -END VERIFY SCRIPT- Signed-off-by: Pasta <pasta@dashboost.org> * scripted-diff: Replace #include "" with #include <> (Dash Specific) -BEGIN VERIFY SCRIPT- for f in \ src/bls/*.cpp \ src/bls/*.h \ src/evo/*.cpp \ src/evo/*.h \ src/governance/*.cpp \ src/governance/*.h \ src/llmq/*.cpp \ src/llmq/*.h \ src/masternode/*.cpp \ src/masternode/*.h \ src/privatesend/*.cpp \ src/privatesend/*.h do base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f done -END VERIFY SCRIPT- Signed-off-by: Pasta <pasta@dashboost.org> * build: Remove -I for everything but project root Remove -I from build system for everything but the project root, and built-in dependencies. Signed-off-by: Pasta <pasta@dashboost.org> # Conflicts: # src/Makefile.test.include * qt: refactor: Use absolute include paths in .ui files * qt: refactor: Changes to make include paths absolute This makes all include paths in the GUI absolute. Many changes are involved as every single source file in src/qt/ assumes to be able to use relative includes. Signed-off-by: Pasta <pasta@dashboost.org> # Conflicts: # src/qt/dash.cpp # src/qt/optionsmodel.cpp # src/qt/test/rpcnestedtests.cpp * test: refactor: Use absolute include paths for test data files * Recommend #include<> syntax in developer notes * refactor: Include obj/build.h instead of build.h * END BACKPORT #11651 Remove trailing whitespace causing travis failure * fix backport 11651 Signed-off-by: Pasta <pasta@dashboost.org> * More of 11651 * fix blockchain.cpp Signed-off-by: pasta <pasta@dashboost.org> * Add missing "qt/" in includes * Add missing "test/" in includes * Fix trailing whitespaces Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com> Co-authored-by: Russell Yanofsky <russ@yanofsky.org> Co-authored-by: MeshCollider <dobsonsa68@gmail.com> Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
2020-03-19 23:46:56 +01:00
#include <chainparamsseeds.h>
static CBlock CreateGenesisBlock(const char* pszTimestamp, const CScript& genesisOutputScript, uint32_t nTime, uint32_t nNonce, uint32_t nBits, int32_t nVersion, const CAmount& genesisReward)
{
CMutableTransaction txNew;
txNew.nVersion = 1;
txNew.vin.resize(1);
txNew.vout.resize(1);
2015-06-05 22:01:44 +02:00
txNew.vin[0].scriptSig = CScript() << 486604799 << CScriptNum(4) << std::vector<unsigned char>((const unsigned char*)pszTimestamp, (const unsigned char*)pszTimestamp + strlen(pszTimestamp));
txNew.vout[0].nValue = genesisReward;
txNew.vout[0].scriptPubKey = genesisOutputScript;
CBlock genesis;
genesis.nTime = nTime;
genesis.nBits = nBits;
genesis.nNonce = nNonce;
genesis.nVersion = nVersion;
genesis.vtx.push_back(MakeTransactionRef(std::move(txNew)));
genesis.hashPrevBlock.SetNull();
genesis.hashMerkleRoot = BlockMerkleRoot(genesis);
return genesis;
}
static CBlock CreateDevNetGenesisBlock(const uint256 &prevBlockHash, const std::string& devNetName, uint32_t nTime, uint32_t nNonce, uint32_t nBits, const CAmount& genesisReward)
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
{
assert(!devNetName.empty());
CMutableTransaction txNew;
txNew.nVersion = 1;
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
txNew.vin.resize(1);
txNew.vout.resize(1);
// put height (BIP34) and devnet name into coinbase
txNew.vin[0].scriptSig = CScript() << 1 << std::vector<unsigned char>(devNetName.begin(), devNetName.end());
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
txNew.vout[0].nValue = genesisReward;
txNew.vout[0].scriptPubKey = CScript() << OP_RETURN;
CBlock genesis;
genesis.nTime = nTime;
genesis.nBits = nBits;
genesis.nNonce = nNonce;
genesis.nVersion = 4;
genesis.vtx.push_back(MakeTransactionRef(std::move(txNew)));
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
genesis.hashPrevBlock = prevBlockHash;
genesis.hashMerkleRoot = BlockMerkleRoot(genesis);
return genesis;
}
/**
* Build the genesis block. Note that the output of its generation
* transaction cannot be spent since it did not originally exist in the
* database.
*
* CBlock(hash=00000ffd590b14, ver=1, hashPrevBlock=00000000000000, hashMerkleRoot=e0028e, nTime=1390095618, nBits=1e0ffff0, nNonce=28917698, vtx=1)
* CTransaction(hash=e0028e, ver=1, vin.size=1, vout.size=1, nLockTime=0)
* CTxIn(COutPoint(000000, -1), coinbase 04ffff001d01044c5957697265642030392f4a616e2f3230313420546865204772616e64204578706572696d656e7420476f6573204c6976653a204f76657273746f636b2e636f6d204973204e6f7720416363657074696e6720426974636f696e73)
* CTxOut(nValue=50.00000000, scriptPubKey=0xA9037BAC7050C479B121CF)
* vMerkleTree: e0028e
*/
static CBlock CreateGenesisBlock(uint32_t nTime, uint32_t nNonce, uint32_t nBits, int32_t nVersion, const CAmount& genesisReward)
{
const char* pszTimestamp = "Wired 09/Jan/2014 The Grand Experiment Goes Live: Overstock.com Is Now Accepting Bitcoins";
const CScript genesisOutputScript = CScript() << ParseHex("040184710fa689ad5023690c80f3a49c8f13f8d45b8c857fbcbc8bc4a8e4d3eb4b10f4d4604fa08dce601aaf0f470216fe1b51850b4acf21b179c45070ac7b03a9") << OP_CHECKSIG;
return CreateGenesisBlock(pszTimestamp, genesisOutputScript, nTime, nNonce, nBits, nVersion, genesisReward);
}
void CChainParams::UpdateVersionBitsParameters(Consensus::DeploymentPos d, int64_t nStartTime, int64_t nTimeout, int64_t nWindowSize, int64_t nThresholdStart, int64_t nThresholdMin, int64_t nFalloffCoeff)
{
consensus.vDeployments[d].nStartTime = nStartTime;
consensus.vDeployments[d].nTimeout = nTimeout;
if (nWindowSize != -1) {
consensus.vDeployments[d].nWindowSize = nWindowSize;
}
if (nThresholdStart != -1) {
consensus.vDeployments[d].nThresholdStart = nThresholdStart;
}
if (nThresholdMin != -1) {
consensus.vDeployments[d].nThresholdMin = nThresholdMin;
}
if (nFalloffCoeff != -1) {
consensus.vDeployments[d].nFalloffCoeff = nFalloffCoeff;
}
}
void CChainParams::UpdateDIP3Parameters(int nActivationHeight, int nEnforcementHeight)
{
consensus.DIP0003Height = nActivationHeight;
consensus.DIP0003EnforcementHeight = nEnforcementHeight;
}
void CChainParams::UpdateBudgetParameters(int nMasternodePaymentsStartBlock, int nBudgetPaymentsStartBlock, int nSuperblockStartBlock)
{
consensus.nMasternodePaymentsStartBlock = nMasternodePaymentsStartBlock;
consensus.nBudgetPaymentsStartBlock = nBudgetPaymentsStartBlock;
consensus.nSuperblockStartBlock = nSuperblockStartBlock;
}
void CChainParams::UpdateSubsidyAndDiffParams(int nMinimumDifficultyBlocks, int nHighSubsidyBlocks, int nHighSubsidyFactor)
{
consensus.nMinimumDifficultyBlocks = nMinimumDifficultyBlocks;
consensus.nHighSubsidyBlocks = nHighSubsidyBlocks;
consensus.nHighSubsidyFactor = nHighSubsidyFactor;
}
void CChainParams::UpdateLLMQChainLocks(Consensus::LLMQType llmqType) {
consensus.llmqTypeChainLocks = llmqType;
}
void CChainParams::UpdateLLMQTestParams(int size, int threshold) {
auto& params = consensus.llmqs.at(Consensus::LLMQ_TEST);
params.size = size;
params.minSize = threshold;
params.threshold = threshold;
params.dkgBadVotesThreshold = threshold;
}
void CChainParams::UpdateLLMQDevnetParams(int size, int threshold)
{
auto& params = consensus.llmqs.at(Consensus::LLMQ_DEVNET);
params.size = size;
params.minSize = threshold;
params.threshold = threshold;
params.dkgBadVotesThreshold = threshold;
}
static CBlock FindDevNetGenesisBlock(const CBlock &prevBlock, const CAmount& reward)
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
{
std::string devNetName = gArgs.GetDevNetName();
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
assert(!devNetName.empty());
CBlock block = CreateDevNetGenesisBlock(prevBlock.GetHash(), devNetName.c_str(), prevBlock.nTime + 1, 0, prevBlock.nBits, reward);
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
arith_uint256 bnTarget;
bnTarget.SetCompact(block.nBits);
for (uint32_t nNonce = 0; nNonce < UINT32_MAX; nNonce++) {
block.nNonce = nNonce;
uint256 hash = block.GetHash();
if (UintToArith256(hash) <= bnTarget)
return block;
}
// This is very unlikely to happen as we start the devnet with a very low difficulty. In many cases even the first
// iteration of the above loop will give a result already
error("FindDevNetGenesisBlock: could not find devnet genesis block for %s", devNetName);
assert(false);
}
Implement and enforce DIP6 commitments (#2477) * Add LLMQ parameters to consensus params * Add DIP6 quorum commitment special TX * Implement CQuorumBlockProcessor which validates and handles commitments * Add quorum commitments to new blocks * Propagate QFCOMMITMENT messages to all nodes * Allow special transactions in blocks which have no inputs/outputs But only for TRANSACTION_QUORUM_COMMITMENT for now. * Add quorum commitments to self-crafted blocks in DIP3 tests * Add simple fork logic for current testnet This should avoid a fork on the current testnet. It only applies to the current chain which activated DIP3 at height 264000 and block 00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f. When we revert the chain to retest the DIP3 deployment, this fork logic can be removed again. * Use quorumVvecHash instead of quorumHash to make null commitments unique Implementation of https://github.com/dashpay/dips/pull/31 * Re-add quorum commitments after pruning mempool selected blocks * Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements Also add BEGIN/END markers for temporary code. * Add comments/documentation to LLMQParams * Move code which determines if a commitment is required into IsCommitmentRequired This should make the code easier to read and also removes some duplication. The also changes the error types that are possible from 3 to 2 now. Instead of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is only "bad-qc-not-allowed" now. * Use new parameter from consensus parames for the temporary fork
2018-11-23 15:42:09 +01:00
// this one is for testing only
static Consensus::LLMQParams llmq_test = {
.type = Consensus::LLMQ_TEST,
.name = "llmq_test",
.size = 3,
.minSize = 2,
.threshold = 2,
Implement and enforce DIP6 commitments (#2477) * Add LLMQ parameters to consensus params * Add DIP6 quorum commitment special TX * Implement CQuorumBlockProcessor which validates and handles commitments * Add quorum commitments to new blocks * Propagate QFCOMMITMENT messages to all nodes * Allow special transactions in blocks which have no inputs/outputs But only for TRANSACTION_QUORUM_COMMITMENT for now. * Add quorum commitments to self-crafted blocks in DIP3 tests * Add simple fork logic for current testnet This should avoid a fork on the current testnet. It only applies to the current chain which activated DIP3 at height 264000 and block 00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f. When we revert the chain to retest the DIP3 deployment, this fork logic can be removed again. * Use quorumVvecHash instead of quorumHash to make null commitments unique Implementation of https://github.com/dashpay/dips/pull/31 * Re-add quorum commitments after pruning mempool selected blocks * Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements Also add BEGIN/END markers for temporary code. * Add comments/documentation to LLMQParams * Move code which determines if a commitment is required into IsCommitmentRequired This should make the code easier to read and also removes some duplication. The also changes the error types that are possible from 3 to 2 now. Instead of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is only "bad-qc-not-allowed" now. * Use new parameter from consensus parames for the temporary fork
2018-11-23 15:42:09 +01:00
.dkgInterval = 24, // one DKG per hour
.dkgPhaseBlocks = 2,
.dkgMiningWindowStart = 10, // dkgPhaseBlocks * 5 = after finalization
.dkgMiningWindowEnd = 18,
.dkgBadVotesThreshold = 2,
2018-05-24 16:14:55 +02:00
.signingActiveQuorumCount = 2, // just a few ones to allow easier testing
.keepOldConnections = 3,
.recoveryMembers = 3,
Implement and enforce DIP6 commitments (#2477) * Add LLMQ parameters to consensus params * Add DIP6 quorum commitment special TX * Implement CQuorumBlockProcessor which validates and handles commitments * Add quorum commitments to new blocks * Propagate QFCOMMITMENT messages to all nodes * Allow special transactions in blocks which have no inputs/outputs But only for TRANSACTION_QUORUM_COMMITMENT for now. * Add quorum commitments to self-crafted blocks in DIP3 tests * Add simple fork logic for current testnet This should avoid a fork on the current testnet. It only applies to the current chain which activated DIP3 at height 264000 and block 00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f. When we revert the chain to retest the DIP3 deployment, this fork logic can be removed again. * Use quorumVvecHash instead of quorumHash to make null commitments unique Implementation of https://github.com/dashpay/dips/pull/31 * Re-add quorum commitments after pruning mempool selected blocks * Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements Also add BEGIN/END markers for temporary code. * Add comments/documentation to LLMQParams * Move code which determines if a commitment is required into IsCommitmentRequired This should make the code easier to read and also removes some duplication. The also changes the error types that are possible from 3 to 2 now. Instead of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is only "bad-qc-not-allowed" now. * Use new parameter from consensus parames for the temporary fork
2018-11-23 15:42:09 +01:00
};
// this one is for testing only
static Consensus::LLMQParams llmq_test_v17 = {
.type = Consensus::LLMQ_TEST_V17,
.name = "llmq_test_v17",
.size = 3,
.minSize = 2,
.threshold = 2,
.dkgInterval = 24, // one DKG per hour
.dkgPhaseBlocks = 2,
.dkgMiningWindowStart = 10, // dkgPhaseBlocks * 5 = after finalization
.dkgMiningWindowEnd = 18,
.dkgBadVotesThreshold = 2,
.signingActiveQuorumCount = 2, // just a few ones to allow easier testing
.keepOldConnections = 3,
.recoveryMembers = 3,
};
// this one is for devnets only
static Consensus::LLMQParams llmq_devnet = {
.type = Consensus::LLMQ_DEVNET,
.name = "llmq_devnet",
.size = 10,
.minSize = 7,
.threshold = 6,
.dkgInterval = 24, // one DKG per hour
.dkgPhaseBlocks = 2,
.dkgMiningWindowStart = 10, // dkgPhaseBlocks * 5 = after finalization
.dkgMiningWindowEnd = 18,
.dkgBadVotesThreshold = 7,
.signingActiveQuorumCount = 3, // just a few ones to allow easier testing
.keepOldConnections = 4,
.recoveryMembers = 6,
};
Implement and enforce DIP6 commitments (#2477) * Add LLMQ parameters to consensus params * Add DIP6 quorum commitment special TX * Implement CQuorumBlockProcessor which validates and handles commitments * Add quorum commitments to new blocks * Propagate QFCOMMITMENT messages to all nodes * Allow special transactions in blocks which have no inputs/outputs But only for TRANSACTION_QUORUM_COMMITMENT for now. * Add quorum commitments to self-crafted blocks in DIP3 tests * Add simple fork logic for current testnet This should avoid a fork on the current testnet. It only applies to the current chain which activated DIP3 at height 264000 and block 00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f. When we revert the chain to retest the DIP3 deployment, this fork logic can be removed again. * Use quorumVvecHash instead of quorumHash to make null commitments unique Implementation of https://github.com/dashpay/dips/pull/31 * Re-add quorum commitments after pruning mempool selected blocks * Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements Also add BEGIN/END markers for temporary code. * Add comments/documentation to LLMQParams * Move code which determines if a commitment is required into IsCommitmentRequired This should make the code easier to read and also removes some duplication. The also changes the error types that are possible from 3 to 2 now. Instead of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is only "bad-qc-not-allowed" now. * Use new parameter from consensus parames for the temporary fork
2018-11-23 15:42:09 +01:00
static Consensus::LLMQParams llmq50_60 = {
.type = Consensus::LLMQ_50_60,
.name = "llmq_50_60",
.size = 50,
.minSize = 40,
.threshold = 30,
.dkgInterval = 24, // one DKG per hour
.dkgPhaseBlocks = 2,
.dkgMiningWindowStart = 10, // dkgPhaseBlocks * 5 = after finalization
.dkgMiningWindowEnd = 18,
2018-05-24 16:14:55 +02:00
.dkgBadVotesThreshold = 40,
.signingActiveQuorumCount = 24, // a full day worth of LLMQs
.keepOldConnections = 25,
.recoveryMembers = 25,
Implement and enforce DIP6 commitments (#2477) * Add LLMQ parameters to consensus params * Add DIP6 quorum commitment special TX * Implement CQuorumBlockProcessor which validates and handles commitments * Add quorum commitments to new blocks * Propagate QFCOMMITMENT messages to all nodes * Allow special transactions in blocks which have no inputs/outputs But only for TRANSACTION_QUORUM_COMMITMENT for now. * Add quorum commitments to self-crafted blocks in DIP3 tests * Add simple fork logic for current testnet This should avoid a fork on the current testnet. It only applies to the current chain which activated DIP3 at height 264000 and block 00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f. When we revert the chain to retest the DIP3 deployment, this fork logic can be removed again. * Use quorumVvecHash instead of quorumHash to make null commitments unique Implementation of https://github.com/dashpay/dips/pull/31 * Re-add quorum commitments after pruning mempool selected blocks * Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements Also add BEGIN/END markers for temporary code. * Add comments/documentation to LLMQParams * Move code which determines if a commitment is required into IsCommitmentRequired This should make the code easier to read and also removes some duplication. The also changes the error types that are possible from 3 to 2 now. Instead of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is only "bad-qc-not-allowed" now. * Use new parameter from consensus parames for the temporary fork
2018-11-23 15:42:09 +01:00
};
static Consensus::LLMQParams llmq400_60 = {
.type = Consensus::LLMQ_400_60,
Multiple fixes and optimizations for LLMQs and ChainLocks (#2724) * Indicate success when signing was unnecessary * Fix typo in name of LLMQ_400_60 * Move RemoveAskFor call for CLSIGs into ProcessNewChainLock In case we got INV items for the same CLSIG that we recreated through HandleNewRecoveredSig, (re-)requesting of the CLSIG from other peers becomes unnecessary. * Move Cleanup() call in CChainLocksHandler::UpdatedBlockTip up We bail out early in a few situations from this method, so that Cleanup() might not be called while its at the bottom. * Bail out from CChainLocksHandler::UpdatedBlockTip if we already got the CLSIG * Call RemoveAskFor when QFCOMMITMENT was received Otherwise we might end up re-requesting it for a very long time when the commitment INV was received shortly before it got mined. * Call RemoveSigSharesForSession when a recovered sig is received Otherwise we end up with session data in node states lingering around until a fake "timeout" occurs (can be seen in the logs). * Better handling of false-positive conflicts in CSigningManager The old code was emitting a lot of messages in logs as it treated sigs for exactly the same session as a conflict. This commit fixes this by looking at the signHash before logging. Also handle a corner-case where a recovered sig might be deleted between the HasRecoveredSigForId and GetRecoveredSigById call. * Don't run into session timeout when sig shares come in slow Instead of just tracking when the first share was received, we now also track when the last (non-duplicate) share was received. Sessios will now timeout 5 minutes after the first share arrives, or 1 minute after the last one arrived.
2019-02-27 14:10:12 +01:00
.name = "llmq_400_60",
Implement and enforce DIP6 commitments (#2477) * Add LLMQ parameters to consensus params * Add DIP6 quorum commitment special TX * Implement CQuorumBlockProcessor which validates and handles commitments * Add quorum commitments to new blocks * Propagate QFCOMMITMENT messages to all nodes * Allow special transactions in blocks which have no inputs/outputs But only for TRANSACTION_QUORUM_COMMITMENT for now. * Add quorum commitments to self-crafted blocks in DIP3 tests * Add simple fork logic for current testnet This should avoid a fork on the current testnet. It only applies to the current chain which activated DIP3 at height 264000 and block 00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f. When we revert the chain to retest the DIP3 deployment, this fork logic can be removed again. * Use quorumVvecHash instead of quorumHash to make null commitments unique Implementation of https://github.com/dashpay/dips/pull/31 * Re-add quorum commitments after pruning mempool selected blocks * Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements Also add BEGIN/END markers for temporary code. * Add comments/documentation to LLMQParams * Move code which determines if a commitment is required into IsCommitmentRequired This should make the code easier to read and also removes some duplication. The also changes the error types that are possible from 3 to 2 now. Instead of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is only "bad-qc-not-allowed" now. * Use new parameter from consensus parames for the temporary fork
2018-11-23 15:42:09 +01:00
.size = 400,
.minSize = 300,
.threshold = 240,
.dkgInterval = 24 * 12, // one DKG every 12 hours
.dkgPhaseBlocks = 4,
.dkgMiningWindowStart = 20, // dkgPhaseBlocks * 5 = after finalization
.dkgMiningWindowEnd = 28,
2018-05-24 16:14:55 +02:00
.dkgBadVotesThreshold = 300,
.signingActiveQuorumCount = 4, // two days worth of LLMQs
.keepOldConnections = 5,
.recoveryMembers = 100,
Implement and enforce DIP6 commitments (#2477) * Add LLMQ parameters to consensus params * Add DIP6 quorum commitment special TX * Implement CQuorumBlockProcessor which validates and handles commitments * Add quorum commitments to new blocks * Propagate QFCOMMITMENT messages to all nodes * Allow special transactions in blocks which have no inputs/outputs But only for TRANSACTION_QUORUM_COMMITMENT for now. * Add quorum commitments to self-crafted blocks in DIP3 tests * Add simple fork logic for current testnet This should avoid a fork on the current testnet. It only applies to the current chain which activated DIP3 at height 264000 and block 00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f. When we revert the chain to retest the DIP3 deployment, this fork logic can be removed again. * Use quorumVvecHash instead of quorumHash to make null commitments unique Implementation of https://github.com/dashpay/dips/pull/31 * Re-add quorum commitments after pruning mempool selected blocks * Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements Also add BEGIN/END markers for temporary code. * Add comments/documentation to LLMQParams * Move code which determines if a commitment is required into IsCommitmentRequired This should make the code easier to read and also removes some duplication. The also changes the error types that are possible from 3 to 2 now. Instead of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is only "bad-qc-not-allowed" now. * Use new parameter from consensus parames for the temporary fork
2018-11-23 15:42:09 +01:00
};
// Used for deployment and min-proto-version signalling, so it needs a higher threshold
static Consensus::LLMQParams llmq400_85 = {
.type = Consensus::LLMQ_400_85,
.name = "llmq_400_85",
.size = 400,
.minSize = 350,
.threshold = 340,
.dkgInterval = 24 * 24, // one DKG every 24 hours
.dkgPhaseBlocks = 4,
.dkgMiningWindowStart = 20, // dkgPhaseBlocks * 5 = after finalization
.dkgMiningWindowEnd = 48, // give it a larger mining window to make sure it is mined
2018-05-24 16:14:55 +02:00
.dkgBadVotesThreshold = 300,
.signingActiveQuorumCount = 4, // four days worth of LLMQs
.keepOldConnections = 5,
.recoveryMembers = 100,
Implement and enforce DIP6 commitments (#2477) * Add LLMQ parameters to consensus params * Add DIP6 quorum commitment special TX * Implement CQuorumBlockProcessor which validates and handles commitments * Add quorum commitments to new blocks * Propagate QFCOMMITMENT messages to all nodes * Allow special transactions in blocks which have no inputs/outputs But only for TRANSACTION_QUORUM_COMMITMENT for now. * Add quorum commitments to self-crafted blocks in DIP3 tests * Add simple fork logic for current testnet This should avoid a fork on the current testnet. It only applies to the current chain which activated DIP3 at height 264000 and block 00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f. When we revert the chain to retest the DIP3 deployment, this fork logic can be removed again. * Use quorumVvecHash instead of quorumHash to make null commitments unique Implementation of https://github.com/dashpay/dips/pull/31 * Re-add quorum commitments after pruning mempool selected blocks * Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements Also add BEGIN/END markers for temporary code. * Add comments/documentation to LLMQParams * Move code which determines if a commitment is required into IsCommitmentRequired This should make the code easier to read and also removes some duplication. The also changes the error types that are possible from 3 to 2 now. Instead of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is only "bad-qc-not-allowed" now. * Use new parameter from consensus parames for the temporary fork
2018-11-23 15:42:09 +01:00
};
// Used for Platform
static Consensus::LLMQParams llmq100_67 = {
.type = Consensus::LLMQ_100_67,
.name = "llmq_100_67",
.size = 100,
.minSize = 80,
.threshold = 67,
.dkgInterval = 24, // one DKG per hour
.dkgPhaseBlocks = 2,
.dkgMiningWindowStart = 10, // dkgPhaseBlocks * 5 = after finalization
.dkgMiningWindowEnd = 18,
.dkgBadVotesThreshold = 80,
.signingActiveQuorumCount = 24, // a full day worth of LLMQs
.keepOldConnections = 25,
.recoveryMembers = 50,
};
Implement and enforce DIP6 commitments (#2477) * Add LLMQ parameters to consensus params * Add DIP6 quorum commitment special TX * Implement CQuorumBlockProcessor which validates and handles commitments * Add quorum commitments to new blocks * Propagate QFCOMMITMENT messages to all nodes * Allow special transactions in blocks which have no inputs/outputs But only for TRANSACTION_QUORUM_COMMITMENT for now. * Add quorum commitments to self-crafted blocks in DIP3 tests * Add simple fork logic for current testnet This should avoid a fork on the current testnet. It only applies to the current chain which activated DIP3 at height 264000 and block 00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f. When we revert the chain to retest the DIP3 deployment, this fork logic can be removed again. * Use quorumVvecHash instead of quorumHash to make null commitments unique Implementation of https://github.com/dashpay/dips/pull/31 * Re-add quorum commitments after pruning mempool selected blocks * Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements Also add BEGIN/END markers for temporary code. * Add comments/documentation to LLMQParams * Move code which determines if a commitment is required into IsCommitmentRequired This should make the code easier to read and also removes some duplication. The also changes the error types that are possible from 3 to 2 now. Instead of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is only "bad-qc-not-allowed" now. * Use new parameter from consensus parames for the temporary fork
2018-11-23 15:42:09 +01:00
/**
* Main network
*/
/**
* What makes a good checkpoint block?
* + Is surrounded by blocks with reasonable timestamps
* (no blocks before with a timestamp after, none after with
* timestamp before)
* + Contains no strange transactions
*/
2015-08-02 16:28:38 +02:00
class CMainParams : public CChainParams {
public:
CMainParams() {
strNetworkID = "main";
consensus.nSubsidyHalvingInterval = 210240; // Note: actual number of blocks per calendar year with DGW v3 is ~200700 (for example 449750 - 249050)
consensus.nMasternodePaymentsStartBlock = 100000; // not true, but it's ok as long as it's less then nMasternodePaymentsIncreaseBlock
consensus.nMasternodePaymentsIncreaseBlock = 158000; // actual historical value
consensus.nMasternodePaymentsIncreasePeriod = 576*30; // 17280 - actual historical value
consensus.nInstantSendConfirmationsRequired = 6;
consensus.nInstantSendKeepLock = 24;
consensus.nBudgetPaymentsStartBlock = 328008; // actual historical value
consensus.nBudgetPaymentsCycleBlocks = 16616; // ~(60*24*30)/2.6, actual number of blocks per month is 200700 / 12 = 16725
consensus.nBudgetPaymentsWindowBlocks = 100;
consensus.nSuperblockStartBlock = 614820; // The block at which 12.1 goes live (end of final 12.0 budget cycle)
consensus.nSuperblockStartHash = uint256S("0000000000020cb27c7ef164d21003d5d20cdca2f54dd9a9ca6d45f4d47f8aa3");
consensus.nSuperblockCycle = 16616; // ~(60*24*30)/2.6, actual number of blocks per month is 200700 / 12 = 16725
consensus.nGovernanceMinQuorum = 10;
consensus.nGovernanceFilterElements = 20000;
consensus.nMasternodeMinimumConfirmations = 15;
consensus.BIP34Height = 951;
consensus.BIP34Hash = uint256S("0x000001f35e70f7c5705f64c6c5cc3dea9449e74d5b5c7cf74dad1bcca14a8012");
consensus.BIP65Height = 619382; // 00000000000076d8fcea02ec0963de4abfd01e771fec0863f960c2c64fe6f357
consensus.BIP66Height = 245817; // 00000000000b1fa2dfa312863570e13fae9ca7b5566cb27e55422620b469aefa
consensus.DIP0001Height = 782208;
consensus.DIP0003Height = 1028160;
consensus.DIP0003EnforcementHeight = 1047200;
consensus.DIP0003EnforcementHash = uint256S("000000000000002d1734087b4c5afc3133e4e1c3e1a89218f62bcd9bb3d17f81");
A pack of small fixes (#1992) * Make sure gobject collateral was mined `CGovernanceObject::IsCollateralValid()` would still fail for non-mined collateral later trying to check confirmations * Fix powLimit for mainnet/testnet That's a legacy thing, slightly rising it to match the actual bit-shifted value has no effect because real values are already lower. Also clarify values for all networks in comments. * Check for script addresses in CSuperblock::ParsePaymentSchedule() Sentinel should already be downvoting such triggers if they would exist, no need to store/relay them. * Do not process already known valid vote twice in CGovernanceObject::ProcessVote() This should be handled by `CGovernanceManager::ProcessVote()` but imo it's better to have this at the `CGovernanceObject::ProcessVote()` level as well. * Make sure CGovernanceObjectVoteFile::AddVote() never adds/updates already known votes The way `CGovernanceObjectVoteFile::AddVote()` is used (i.e. wrapped in `CGovernanceObjectVoteFile::HasVote()` condition) it's already the case. Hoever nothing would guarantee consistency if it would be used elsewhere without such wrapper, so it's better to have similar check inside. * Do not even try mnb recovery when -connect is set `CConnman::ThreadOpenMasternodeConnections()` thread won't even start when `-connect` is set, so no need to ask for recovery, there is nothing that is going to be able to process such request. * No need for SIGHASH_ANYONECANPAY in PS collateral signature Collateral is just a normal tx created and signed by each participant individually, there is no need for special sig types. * Release semMasternodeOutbound in CConnman::Interrupt() Re-align Dash code with Bitcoin.
2018-03-19 14:08:32 +01:00
consensus.powLimit = uint256S("00000fffffffffffffffffffffffffffffffffffffffffffffffffffffffffff"); // ~uint256(0) >> 20
consensus.nPowTargetTimespan = 24 * 60 * 60; // Dash: 1 day
consensus.nPowTargetSpacing = 2.5 * 60; // Dash: 2.5 minutes
consensus.fPowAllowMinDifficultyBlocks = false;
consensus.fPowNoRetargeting = false;
consensus.nPowKGWHeight = 15200;
consensus.nPowDGWHeight = 34140;
consensus.nRuleChangeActivationThreshold = 1916; // 95% of 2016
consensus.nMinerConfirmationWindow = 2016; // nPowTargetTimespan / nPowTargetSpacing
2016-03-09 22:00:53 +01:00
consensus.vDeployments[Consensus::DEPLOYMENT_TESTDUMMY].bit = 28;
consensus.vDeployments[Consensus::DEPLOYMENT_TESTDUMMY].nStartTime = 1199145601; // January 1, 2008
consensus.vDeployments[Consensus::DEPLOYMENT_TESTDUMMY].nTimeout = 1230767999; // December 31, 2008
// Deployment of BIP68, BIP112, and BIP113.
consensus.vDeployments[Consensus::DEPLOYMENT_CSV].bit = 0;
consensus.vDeployments[Consensus::DEPLOYMENT_CSV].nStartTime = 1486252800; // Feb 5th, 2017
consensus.vDeployments[Consensus::DEPLOYMENT_CSV].nTimeout = 1517788800; // Feb 5th, 2018
// Deployment of DIP0001
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0001].bit = 1;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0001].nStartTime = 1508025600; // Oct 15th, 2017
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0001].nTimeout = 1539561600; // Oct 15th, 2018
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0001].nWindowSize = 4032;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0001].nThresholdStart = 3226; // 80% of 4032
2018-01-30 20:18:51 +01:00
// Deployment of BIP147
consensus.vDeployments[Consensus::DEPLOYMENT_BIP147].bit = 2;
consensus.vDeployments[Consensus::DEPLOYMENT_BIP147].nStartTime = 1524477600; // Apr 23th, 2018
consensus.vDeployments[Consensus::DEPLOYMENT_BIP147].nTimeout = 1556013600; // Apr 23th, 2019
2018-01-30 20:18:51 +01:00
consensus.vDeployments[Consensus::DEPLOYMENT_BIP147].nWindowSize = 4032;
consensus.vDeployments[Consensus::DEPLOYMENT_BIP147].nThresholdStart = 3226; // 80% of 4032
2018-01-30 20:18:51 +01:00
// Deployment of DIP0003
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0003].bit = 3;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0003].nStartTime = 1546300800; // Jan 1st, 2019
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0003].nTimeout = 1577836800; // Jan 1st, 2020
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0003].nWindowSize = 4032;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0003].nThresholdStart = 3226; // 80% of 4032
// Deployment of DIP0008
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0008].bit = 4;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0008].nStartTime = 1557878400; // May 15th, 2019
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0008].nTimeout = 1589500800; // May 15th, 2020
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0008].nWindowSize = 4032;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0008].nThresholdStart = 3226; // 80% of 4032
// Deployment of Block Reward Reallocation
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].bit = 5;
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nStartTime = 1601510400; // Oct 1st, 2020
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nTimeout = 1633046400; // Oct 1st, 2021
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nWindowSize = 4032;
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nThresholdStart = 3226; // 80% of 4032
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nThresholdMin = 2420; // 60% of 4032
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nFalloffCoeff = 5; // this corresponds to 10 periods
// Deployment of v17 Hard Fork
consensus.vDeployments[Consensus::DEPLOYMENT_V17].bit = 6;
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nStartTime = 1612137600; // February 1st, 2021
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nTimeout = 1643673600; // February 1st, 2022
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nWindowSize = 4032;
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nThresholdStart = 3226; // 80% of 4032
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nThresholdMin = 2420; // 60% of 4032
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nFalloffCoeff = 5; // this corresponds to 10 periods
Backport "assumed valid blocks" feature from Bitcoin 0.13 (#1582) * IBD check uses minimumchain work instead of checkpoints. This introduces a 'minimum chain work' chainparam which is intended to be the known amount of work in the chain for the network at the time of software release. If you don't have this much work, you're not yet caught up. This is used instead of the count of blocks test from checkpoints. This criteria is trivial to keep updated as there is no element of subjectivity, trust, or position dependence to it. It is also a more reliable metric of sync status than a block count. * Remove GetTotalBlocksEstimate and checkpoint tests that test nothing. GetTotalBlocksEstimate is no longer used and it was the only thing the checkpoint tests were testing. Since checkpoints are on their way out it makes more sense to remove the test file than to cook up a new pointless test. # Conflicts: # src/Makefile.test.include # src/test/Checkpoints_tests.cpp * IsInitialBlockDownload no longer uses header-only timestamps. This avoids a corner case (mostly visible on testnet) where bogus headers can keep nodes in IsInitialBlockDownload. * Delay parallel block download until chain has sufficient work nMinimumChainWork is an anti-DoS threshold; wait until we have a proposed tip with more work than that before downloading blocks towards that tip. * Add timeout for headers sync At startup, we choose one peer to serve us the headers chain, until our best header is close to caught up. Disconnect this peer if more than 15 minutes + 1ms/expected_header passes and our best header is still more than 1 day away from current time. * Introduce assumevalid setting to skip presumed valid scripts. This disentangles the script validation skipping from checkpoints. A new option is introduced "assumevalid" which specifies a block whos ancestors we assume all have valid scriptsigs and so we do not check them when they are also burried under the best header by two weeks worth of work. Unlike checkpoints this has no influence on consensus unless you set it to a block with an invalid history. Because of this it can be easily be updated without risk of influencing the network consensus. This results in a massive IBD speedup. This approach was independently recommended by Peter Todd and Luke-Jr since POW based signature skipping (see PR#9180) does not have the verifiable properties of a specific hash and may create bad incentives. The downside is that, like checkpoints, the defaults bitrot and older releases will sync slower. On the plus side users can provide their own value here, and if they set it to something crazy all that will happen is more time will be spend validating signatures. Checkblocks and checklevel are also moved to the hidden debug options: Especially now that checkblocks has a low default there is little need to change these settings, and users frequently misunderstand them as influencing security or IBD speed. By hiding them we offset the space added by this new option. * Add consensusParams to FindNextBlocksToDownload * Adjust check in headers timeout logic to align with 144 blocks in Dash
2017-08-23 16:21:08 +02:00
// The best chain should have at least this much work.
consensus.nMinimumChainWork = uint256S("0x0000000000000000000000000000000000000000000044f363f417890207722e"); // 1364585
Backport "assumed valid blocks" feature from Bitcoin 0.13 (#1582) * IBD check uses minimumchain work instead of checkpoints. This introduces a 'minimum chain work' chainparam which is intended to be the known amount of work in the chain for the network at the time of software release. If you don't have this much work, you're not yet caught up. This is used instead of the count of blocks test from checkpoints. This criteria is trivial to keep updated as there is no element of subjectivity, trust, or position dependence to it. It is also a more reliable metric of sync status than a block count. * Remove GetTotalBlocksEstimate and checkpoint tests that test nothing. GetTotalBlocksEstimate is no longer used and it was the only thing the checkpoint tests were testing. Since checkpoints are on their way out it makes more sense to remove the test file than to cook up a new pointless test. # Conflicts: # src/Makefile.test.include # src/test/Checkpoints_tests.cpp * IsInitialBlockDownload no longer uses header-only timestamps. This avoids a corner case (mostly visible on testnet) where bogus headers can keep nodes in IsInitialBlockDownload. * Delay parallel block download until chain has sufficient work nMinimumChainWork is an anti-DoS threshold; wait until we have a proposed tip with more work than that before downloading blocks towards that tip. * Add timeout for headers sync At startup, we choose one peer to serve us the headers chain, until our best header is close to caught up. Disconnect this peer if more than 15 minutes + 1ms/expected_header passes and our best header is still more than 1 day away from current time. * Introduce assumevalid setting to skip presumed valid scripts. This disentangles the script validation skipping from checkpoints. A new option is introduced "assumevalid" which specifies a block whos ancestors we assume all have valid scriptsigs and so we do not check them when they are also burried under the best header by two weeks worth of work. Unlike checkpoints this has no influence on consensus unless you set it to a block with an invalid history. Because of this it can be easily be updated without risk of influencing the network consensus. This results in a massive IBD speedup. This approach was independently recommended by Peter Todd and Luke-Jr since POW based signature skipping (see PR#9180) does not have the verifiable properties of a specific hash and may create bad incentives. The downside is that, like checkpoints, the defaults bitrot and older releases will sync slower. On the plus side users can provide their own value here, and if they set it to something crazy all that will happen is more time will be spend validating signatures. Checkblocks and checklevel are also moved to the hidden debug options: Especially now that checkblocks has a low default there is little need to change these settings, and users frequently misunderstand them as influencing security or IBD speed. By hiding them we offset the space added by this new option. * Add consensusParams to FindNextBlocksToDownload * Adjust check in headers timeout logic to align with 144 blocks in Dash
2017-08-23 16:21:08 +02:00
// By default assume that the signatures in ancestors of this block are valid.
consensus.defaultAssumeValid = uint256S("0x00000000000000022f355c52417fca9b73306958f7c0832b3a7bce006ca369ef"); // 1364585
Backport "assumed valid blocks" feature from Bitcoin 0.13 (#1582) * IBD check uses minimumchain work instead of checkpoints. This introduces a 'minimum chain work' chainparam which is intended to be the known amount of work in the chain for the network at the time of software release. If you don't have this much work, you're not yet caught up. This is used instead of the count of blocks test from checkpoints. This criteria is trivial to keep updated as there is no element of subjectivity, trust, or position dependence to it. It is also a more reliable metric of sync status than a block count. * Remove GetTotalBlocksEstimate and checkpoint tests that test nothing. GetTotalBlocksEstimate is no longer used and it was the only thing the checkpoint tests were testing. Since checkpoints are on their way out it makes more sense to remove the test file than to cook up a new pointless test. # Conflicts: # src/Makefile.test.include # src/test/Checkpoints_tests.cpp * IsInitialBlockDownload no longer uses header-only timestamps. This avoids a corner case (mostly visible on testnet) where bogus headers can keep nodes in IsInitialBlockDownload. * Delay parallel block download until chain has sufficient work nMinimumChainWork is an anti-DoS threshold; wait until we have a proposed tip with more work than that before downloading blocks towards that tip. * Add timeout for headers sync At startup, we choose one peer to serve us the headers chain, until our best header is close to caught up. Disconnect this peer if more than 15 minutes + 1ms/expected_header passes and our best header is still more than 1 day away from current time. * Introduce assumevalid setting to skip presumed valid scripts. This disentangles the script validation skipping from checkpoints. A new option is introduced "assumevalid" which specifies a block whos ancestors we assume all have valid scriptsigs and so we do not check them when they are also burried under the best header by two weeks worth of work. Unlike checkpoints this has no influence on consensus unless you set it to a block with an invalid history. Because of this it can be easily be updated without risk of influencing the network consensus. This results in a massive IBD speedup. This approach was independently recommended by Peter Todd and Luke-Jr since POW based signature skipping (see PR#9180) does not have the verifiable properties of a specific hash and may create bad incentives. The downside is that, like checkpoints, the defaults bitrot and older releases will sync slower. On the plus side users can provide their own value here, and if they set it to something crazy all that will happen is more time will be spend validating signatures. Checkblocks and checklevel are also moved to the hidden debug options: Especially now that checkblocks has a low default there is little need to change these settings, and users frequently misunderstand them as influencing security or IBD speed. By hiding them we offset the space added by this new option. * Add consensusParams to FindNextBlocksToDownload * Adjust check in headers timeout logic to align with 144 blocks in Dash
2017-08-23 16:21:08 +02:00
/**
* The message start string is designed to be unlikely to occur in normal data.
* The characters are rarely used upper ASCII, not valid as UTF-8, and produce
2015-04-28 16:47:17 +02:00
* a large 32-bit integer with any alignment.
*/
pchMessageStart[0] = 0xbf;
pchMessageStart[1] = 0x0c;
pchMessageStart[2] = 0x6b;
pchMessageStart[3] = 0xbd;
nDefaultPort = 9999;
nPruneAfterHeight = 100000;
genesis = CreateGenesisBlock(1390095618, 28917698, 0x1e0ffff0, 1, 50 * COIN);
consensus.hashGenesisBlock = genesis.GetHash();
assert(consensus.hashGenesisBlock == uint256S("0x00000ffd590b1485b3caadc19b22e6379c733355108f107a430458cdf3407ab6"));
assert(genesis.hashMerkleRoot == uint256S("0xe0028eb9648db56b1ac77cf090b99048a8007e2bb64b68f092c03c7f56a662c7"));
// Note that of those which support the service bits prefix, most only support a subset of
// possible options.
// This is fine at runtime as we'll fall back to using them as a oneshot if they don't support the
// service bits we want, but we should get them updated to support all service bits wanted by any
// release ASAP to avoid it where possible.
vSeeds.emplace_back("dnsseed.dash.org");
vSeeds.emplace_back("dnsseed.dashdot.io");
// Dash addresses start with 'X'
base58Prefixes[PUBKEY_ADDRESS] = std::vector<unsigned char>(1,76);
// Dash script addresses start with '7'
base58Prefixes[SCRIPT_ADDRESS] = std::vector<unsigned char>(1,16);
// Dash private keys start with '7' or 'X'
base58Prefixes[SECRET_KEY] = std::vector<unsigned char>(1,204);
// Dash BIP32 pubkeys start with 'xpub' (Bitcoin defaults)
base58Prefixes[EXT_PUBLIC_KEY] = {0x04, 0x88, 0xB2, 0x1E};
// Dash BIP32 prvkeys start with 'xprv' (Bitcoin defaults)
base58Prefixes[EXT_SECRET_KEY] = {0x04, 0x88, 0xAD, 0xE4};
HD wallet (#1405) * HD wallet Minimal set of changes (no refactoring) backported from Bitcoin upstream to make HD wallets work in Dash 0.12.1.x+ * minimal bip44 (hardcoded account and change) * minimal bip39 Additional cmd-line options for new wallet: -mnemonic -mnemonicpassphrase * Do not recreate HD wallet on encryption Adjusted keypool.py test * Do not store any private keys for hd wallet besides the master one Derive all keys on the fly. Original idea/implementation - btc PR9298, backported and improved * actually use bip39 * pbkdf2 test * backport wallet-hd.py test * Allow specifying hd seed, add dumphdseed rpc, fix bugs - -hdseed cmd-line param to specify HD seed on wallet creation - dumphdseed rpc to dump HD seed - allow seed of any size - fix dumpwallet rpc bug (wasn't decrypting HD seed) - print HD seed and extended public masterkey on dumpwallet * top up keypool on HD wallet encryption * split HD chain: external/internal * add missing cs_wallet lock in init.cpp * fix `const char *` issues (use strings) * default mnemonic passphrase is an empty string in all cases * store mnemonic/mnemonicpassphrase replace dumphdseed with dumphdinfo * Add fCrypted flag to CHDChain * prepare internal structures for multiple HD accounts (plus some code cleanup) * use secure allocator for storing sensitive HD data * use secure strings for mnemonic(passphrase) * small fix in GenerateNewHDChain * use 24 words for mnemonic by default * make sure mnemonic passphrase provided by user does not exceed 256 symbols * more usage of secure allocators and memory_cleanse * code cleanup * rename: CSecureVector -> SecureVector * add missing include * fix warning in rpcdump.cpp * refactor mnemonic_check (also fix a bug) * move bip39 functions to CMnemonic * Few fixes for CMnemonic: - use `SecureVector` for data, bits, seed - `Check` should return bool * init vectors with desired size where possible
2017-05-29 13:51:40 +02:00
// Dash BIP44 coin type is '5'
HD wallet (#1405) * HD wallet Minimal set of changes (no refactoring) backported from Bitcoin upstream to make HD wallets work in Dash 0.12.1.x+ * minimal bip44 (hardcoded account and change) * minimal bip39 Additional cmd-line options for new wallet: -mnemonic -mnemonicpassphrase * Do not recreate HD wallet on encryption Adjusted keypool.py test * Do not store any private keys for hd wallet besides the master one Derive all keys on the fly. Original idea/implementation - btc PR9298, backported and improved * actually use bip39 * pbkdf2 test * backport wallet-hd.py test * Allow specifying hd seed, add dumphdseed rpc, fix bugs - -hdseed cmd-line param to specify HD seed on wallet creation - dumphdseed rpc to dump HD seed - allow seed of any size - fix dumpwallet rpc bug (wasn't decrypting HD seed) - print HD seed and extended public masterkey on dumpwallet * top up keypool on HD wallet encryption * split HD chain: external/internal * add missing cs_wallet lock in init.cpp * fix `const char *` issues (use strings) * default mnemonic passphrase is an empty string in all cases * store mnemonic/mnemonicpassphrase replace dumphdseed with dumphdinfo * Add fCrypted flag to CHDChain * prepare internal structures for multiple HD accounts (plus some code cleanup) * use secure allocator for storing sensitive HD data * use secure strings for mnemonic(passphrase) * small fix in GenerateNewHDChain * use 24 words for mnemonic by default * make sure mnemonic passphrase provided by user does not exceed 256 symbols * more usage of secure allocators and memory_cleanse * code cleanup * rename: CSecureVector -> SecureVector * add missing include * fix warning in rpcdump.cpp * refactor mnemonic_check (also fix a bug) * move bip39 functions to CMnemonic * Few fixes for CMnemonic: - use `SecureVector` for data, bits, seed - `Check` should return bool * init vectors with desired size where possible
2017-05-29 13:51:40 +02:00
nExtCoinType = 5;
vFixedSeeds = std::vector<SeedSpec6>(pnSeed6_main, pnSeed6_main + ARRAYLEN(pnSeed6_main));
Implement and enforce DIP6 commitments (#2477) * Add LLMQ parameters to consensus params * Add DIP6 quorum commitment special TX * Implement CQuorumBlockProcessor which validates and handles commitments * Add quorum commitments to new blocks * Propagate QFCOMMITMENT messages to all nodes * Allow special transactions in blocks which have no inputs/outputs But only for TRANSACTION_QUORUM_COMMITMENT for now. * Add quorum commitments to self-crafted blocks in DIP3 tests * Add simple fork logic for current testnet This should avoid a fork on the current testnet. It only applies to the current chain which activated DIP3 at height 264000 and block 00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f. When we revert the chain to retest the DIP3 deployment, this fork logic can be removed again. * Use quorumVvecHash instead of quorumHash to make null commitments unique Implementation of https://github.com/dashpay/dips/pull/31 * Re-add quorum commitments after pruning mempool selected blocks * Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements Also add BEGIN/END markers for temporary code. * Add comments/documentation to LLMQParams * Move code which determines if a commitment is required into IsCommitmentRequired This should make the code easier to read and also removes some duplication. The also changes the error types that are possible from 3 to 2 now. Instead of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is only "bad-qc-not-allowed" now. * Use new parameter from consensus parames for the temporary fork
2018-11-23 15:42:09 +01:00
// long living quorum params
consensus.llmqs[Consensus::LLMQ_50_60] = llmq50_60;
consensus.llmqs[Consensus::LLMQ_400_60] = llmq400_60;
consensus.llmqs[Consensus::LLMQ_400_85] = llmq400_85;
consensus.llmqs[Consensus::LLMQ_100_67] = llmq100_67;
consensus.llmqTypeChainLocks = Consensus::LLMQ_400_60;
consensus.llmqTypeInstantSend = Consensus::LLMQ_50_60;
consensus.llmqTypePlatform = Consensus::LLMQ_100_67;
Implement and enforce DIP6 commitments (#2477) * Add LLMQ parameters to consensus params * Add DIP6 quorum commitment special TX * Implement CQuorumBlockProcessor which validates and handles commitments * Add quorum commitments to new blocks * Propagate QFCOMMITMENT messages to all nodes * Allow special transactions in blocks which have no inputs/outputs But only for TRANSACTION_QUORUM_COMMITMENT for now. * Add quorum commitments to self-crafted blocks in DIP3 tests * Add simple fork logic for current testnet This should avoid a fork on the current testnet. It only applies to the current chain which activated DIP3 at height 264000 and block 00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f. When we revert the chain to retest the DIP3 deployment, this fork logic can be removed again. * Use quorumVvecHash instead of quorumHash to make null commitments unique Implementation of https://github.com/dashpay/dips/pull/31 * Re-add quorum commitments after pruning mempool selected blocks * Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements Also add BEGIN/END markers for temporary code. * Add comments/documentation to LLMQParams * Move code which determines if a commitment is required into IsCommitmentRequired This should make the code easier to read and also removes some duplication. The also changes the error types that are possible from 3 to 2 now. Instead of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is only "bad-qc-not-allowed" now. * Use new parameter from consensus parames for the temporary fork
2018-11-23 15:42:09 +01:00
fDefaultConsistencyChecks = false;
fRequireStandard = true;
fRequireRoutableExternalIP = true;
fMineBlocksOnDemand = false;
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
fAllowMultipleAddressesFromGroup = false;
fAllowMultiplePorts = false;
nLLMQConnectionRetryTimeout = 60;
2015-04-03 00:51:08 +02:00
nPoolMinParticipants = 3;
nPoolMaxParticipants = 20;
nFulfilledRequestExpireTime = 60*60; // fulfilled requests expire in 1 hour
vSporkAddresses = {"Xgtyuk76vhuFW2iT7UAiHgNdWXCf3J34wh"};
nMinSporkKeys = 1;
fBIP9CheckMasternodesUpgraded = true;
checkpointData = {
{
{1500, uint256S("0x000000aaf0300f59f49bc3e970bad15c11f961fe2347accffff19d96ec9778e3")},
{4991, uint256S("0x000000003b01809551952460744d5dbb8fcbd6cbae3c220267bf7fa43f837367")},
{9918, uint256S("0x00000000213e229f332c0ffbe34defdaa9e74de87f2d8d1f01af8d121c3c170b")},
{16912, uint256S("0x00000000075c0d10371d55a60634da70f197548dbbfa4123e12abfcbc5738af9")},
{23912, uint256S("0x0000000000335eac6703f3b1732ec8b2f89c3ba3a7889e5767b090556bb9a276")},
{35457, uint256S("0x0000000000b0ae211be59b048df14820475ad0dd53b9ff83b010f71a77342d9f")},
{45479, uint256S("0x000000000063d411655d590590e16960f15ceea4257122ac430c6fbe39fbf02d")},
{55895, uint256S("0x0000000000ae4c53a43639a4ca027282f69da9c67ba951768a20415b6439a2d7")},
{68899, uint256S("0x0000000000194ab4d3d9eeb1f2f792f21bb39ff767cb547fe977640f969d77b7")},
{74619, uint256S("0x000000000011d28f38f05d01650a502cc3f4d0e793fbc26e2a2ca71f07dc3842")},
{75095, uint256S("0x0000000000193d12f6ad352a9996ee58ef8bdc4946818a5fec5ce99c11b87f0d")},
{88805, uint256S("0x00000000001392f1652e9bf45cd8bc79dc60fe935277cd11538565b4a94fa85f")},
{107996, uint256S("0x00000000000a23840ac16115407488267aa3da2b9bc843e301185b7d17e4dc40")},
{137993, uint256S("0x00000000000cf69ce152b1bffdeddc59188d7a80879210d6e5c9503011929c3c")},
{167996, uint256S("0x000000000009486020a80f7f2cc065342b0c2fb59af5e090cd813dba68ab0fed")},
{207992, uint256S("0x00000000000d85c22be098f74576ef00b7aa00c05777e966aff68a270f1e01a5")},
{312645, uint256S("0x0000000000059dcb71ad35a9e40526c44e7aae6c99169a9e7017b7d84b1c2daf")},
{407452, uint256S("0x000000000003c6a87e73623b9d70af7cd908ae22fee466063e4ffc20be1d2dbc")},
{523412, uint256S("0x000000000000e54f036576a10597e0e42cc22a5159ce572f999c33975e121d4d")},
{523930, uint256S("0x0000000000000bccdb11c2b1cfb0ecab452abf267d89b7f46eaf2d54ce6e652c")},
{750000, uint256S("0x00000000000000b4181bbbdddbae464ce11fede5d0292fb63fdede1e7c8ab21c")},
{888900, uint256S("0x0000000000000026c29d576073ab51ebd1d3c938de02e9a44c7ee9e16f82db28")},
{967800, uint256S("0x0000000000000024e26c7df7e46d673724d223cf4ca2b2adc21297cc095600f4")},
{1067570, uint256S("0x000000000000001e09926bcf5fa4513d23e870a34f74e38200db99eb3f5b7a70")},
{1167570, uint256S("0x000000000000000fb7b1e9b81700283dff0f7d87cf458e5edfdae00c669de661")},
{1364585, uint256S("0x00000000000000022f355c52417fca9b73306958f7c0832b3a7bce006ca369ef")},
}
};
chainTxData = ChainTxData{
1601017518, // * UNIX timestamp of last known number of transactions (Block 1344000)
28914483, // * total number of transactions between genesis and that timestamp
// (the tx=... number in the SetBestChain debug.log lines)
0.3 // * estimated number of transactions per second after that timestamp
};
}
};
/**
* Testnet (v3)
*/
class CTestNetParams : public CChainParams {
public:
CTestNetParams() {
strNetworkID = "test";
consensus.nSubsidyHalvingInterval = 210240;
consensus.nMasternodePaymentsStartBlock = 4010; // not true, but it's ok as long as it's less then nMasternodePaymentsIncreaseBlock
consensus.nMasternodePaymentsIncreaseBlock = 4030;
consensus.nMasternodePaymentsIncreasePeriod = 10;
consensus.nInstantSendConfirmationsRequired = 2;
consensus.nInstantSendKeepLock = 6;
consensus.nBudgetPaymentsStartBlock = 4100;
consensus.nBudgetPaymentsCycleBlocks = 50;
consensus.nBudgetPaymentsWindowBlocks = 10;
consensus.nSuperblockStartBlock = 4200; // NOTE: Should satisfy nSuperblockStartBlock > nBudgetPeymentsStartBlock
consensus.nSuperblockStartHash = uint256(); // do not check this on testnet
consensus.nSuperblockCycle = 24; // Superblocks can be issued hourly on testnet
consensus.nGovernanceMinQuorum = 1;
consensus.nGovernanceFilterElements = 500;
consensus.nMasternodeMinimumConfirmations = 1;
consensus.BIP34Height = 76;
consensus.BIP34Hash = uint256S("0x000008ebb1db2598e897d17275285767717c6acfeac4c73def49fbea1ddcbcb6");
consensus.BIP65Height = 2431; // 0000039cf01242c7f921dcb4806a5994bc003b48c1973ae0c89b67809c2bb2ab
consensus.BIP66Height = 2075; // 0000002acdd29a14583540cb72e1c5cc83783560e38fa7081495d474fe1671f7
consensus.DIP0001Height = 5500;
consensus.DIP0003Height = 7000;
consensus.DIP0003EnforcementHeight = 7300;
consensus.DIP0003EnforcementHash = uint256S("00000055ebc0e974ba3a3fb785c5ad4365a39637d4df168169ee80d313612f8f");
A pack of small fixes (#1992) * Make sure gobject collateral was mined `CGovernanceObject::IsCollateralValid()` would still fail for non-mined collateral later trying to check confirmations * Fix powLimit for mainnet/testnet That's a legacy thing, slightly rising it to match the actual bit-shifted value has no effect because real values are already lower. Also clarify values for all networks in comments. * Check for script addresses in CSuperblock::ParsePaymentSchedule() Sentinel should already be downvoting such triggers if they would exist, no need to store/relay them. * Do not process already known valid vote twice in CGovernanceObject::ProcessVote() This should be handled by `CGovernanceManager::ProcessVote()` but imo it's better to have this at the `CGovernanceObject::ProcessVote()` level as well. * Make sure CGovernanceObjectVoteFile::AddVote() never adds/updates already known votes The way `CGovernanceObjectVoteFile::AddVote()` is used (i.e. wrapped in `CGovernanceObjectVoteFile::HasVote()` condition) it's already the case. Hoever nothing would guarantee consistency if it would be used elsewhere without such wrapper, so it's better to have similar check inside. * Do not even try mnb recovery when -connect is set `CConnman::ThreadOpenMasternodeConnections()` thread won't even start when `-connect` is set, so no need to ask for recovery, there is nothing that is going to be able to process such request. * No need for SIGHASH_ANYONECANPAY in PS collateral signature Collateral is just a normal tx created and signed by each participant individually, there is no need for special sig types. * Release semMasternodeOutbound in CConnman::Interrupt() Re-align Dash code with Bitcoin.
2018-03-19 14:08:32 +01:00
consensus.powLimit = uint256S("00000fffffffffffffffffffffffffffffffffffffffffffffffffffffffffff"); // ~uint256(0) >> 20
consensus.nPowTargetTimespan = 24 * 60 * 60; // Dash: 1 day
consensus.nPowTargetSpacing = 2.5 * 60; // Dash: 2.5 minutes
consensus.fPowAllowMinDifficultyBlocks = true;
consensus.fPowNoRetargeting = false;
consensus.nPowKGWHeight = 4002; // nPowKGWHeight >= nPowDGWHeight means "no KGW"
consensus.nPowDGWHeight = 4002; // TODO: make sure to drop all spork6 related code on next testnet reset
consensus.nRuleChangeActivationThreshold = 1512; // 75% for testchains
consensus.nMinerConfirmationWindow = 2016; // nPowTargetTimespan / nPowTargetSpacing
2016-03-09 22:00:53 +01:00
consensus.vDeployments[Consensus::DEPLOYMENT_TESTDUMMY].bit = 28;
consensus.vDeployments[Consensus::DEPLOYMENT_TESTDUMMY].nStartTime = 1199145601; // January 1, 2008
consensus.vDeployments[Consensus::DEPLOYMENT_TESTDUMMY].nTimeout = 1230767999; // December 31, 2008
// Deployment of BIP68, BIP112, and BIP113.
consensus.vDeployments[Consensus::DEPLOYMENT_CSV].bit = 0;
consensus.vDeployments[Consensus::DEPLOYMENT_CSV].nStartTime = 1544655600; // Dec 13th, 2018
consensus.vDeployments[Consensus::DEPLOYMENT_CSV].nTimeout = 1576191600; // Dec 13th, 2019
// Deployment of DIP0001
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0001].bit = 1;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0001].nStartTime = 1544655600; // Dec 13th, 2018
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0001].nTimeout = 1576191600; // Dec 13th, 2019
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0001].nWindowSize = 100;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0001].nThresholdStart = 50; // 50% of 100
2018-01-30 20:18:51 +01:00
// Deployment of BIP147
consensus.vDeployments[Consensus::DEPLOYMENT_BIP147].bit = 2;
consensus.vDeployments[Consensus::DEPLOYMENT_BIP147].nStartTime = 1544655600; // Dec 13th, 2018
consensus.vDeployments[Consensus::DEPLOYMENT_BIP147].nTimeout = 1576191600; // Dec 13th, 2019
2018-01-30 20:18:51 +01:00
consensus.vDeployments[Consensus::DEPLOYMENT_BIP147].nWindowSize = 100;
consensus.vDeployments[Consensus::DEPLOYMENT_BIP147].nThresholdStart = 50; // 50% of 100
2018-01-30 20:18:51 +01:00
// Deployment of DIP0003
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0003].bit = 3;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0003].nStartTime = 1544655600; // Dec 13th, 2018
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0003].nTimeout = 1576191600; // Dec 13th, 2019
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0003].nWindowSize = 100;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0003].nThresholdStart = 50; // 50% of 100
Automatic InstantSend locks for "simple" transactions (#2140) * add locktransaction rpc call * Remove special instantsend fee for simple transactions * Function to check if trx is simple enough to be autolocked * Automatic lock for all received from peers simple trxes If we get a new transaction with CInv message and it is "simple" and is accepted in mempool, we initiate its lock. We don't lock orphan trxes that accepted in mempool after this trx because they are locked by other peers. * Automatically lock simple trxes in wallet * protocol bump for InstantSend without special fee * Add function to detect used mempool share * Mempool threshold for auto IX locks * Add SPORK_16_INSTANTSEND_AUTOLOCKS spork * Make autolocks active only when spork SPORK_16_INSTANTSEND_AUTOLOCKS is active * BIP9 autolocks activation * revert increasing min peer protocol version for mn rank * move IsTrxSimple check to CTxLockRequest class * make MAX_INPUTS_FOR_AUTO_IX private member of CTxLockRequest class * make AUTO_IX_MEMPOOL_THRESHOLD private member of CInstantSend class * remove locktransaction RPC call * tests for automatic IS locks * fix mempool threshod calculation * bump mocktime in activate_autoix_bip9 * set node times * no need to spam the node with gettransaction rpc requests that often * use `spork active` instead of leaking spork logic into tests * codestyle fixes * add test description in comments * fix typo * sync test nodes more often during BIP9 activation * Use 4th bit in BIP9 activation * Fix comments according codestyle guide * Call AcceptLockRequest and Vote at the first node creating autoix lock * fix mempool used memory calculation * rallback not necessary change in CWallet::CreateTransaction * test for stopping autolocks for full mempool * Inject "simple autolockable" txes into txlockrequest logic
2018-09-26 16:17:47 +02:00
// Deployment of DIP0008
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0008].bit = 4;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0008].nStartTime = 1553126400; // Mar 21st, 2019
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0008].nTimeout = 1584748800; // Mar 21st, 2020
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0008].nWindowSize = 100;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0008].nThresholdStart = 50; // 50% of 100
// Deployment of Block Reward Reallocation
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].bit = 5;
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nStartTime = 1598918400; // Sep 1st, 2020
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nTimeout = 1630454400; // Sep 1st, 2021
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nWindowSize = 100;
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nThresholdStart = 80; // 80% of 100
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nThresholdMin = 60; // 60% of 100
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nFalloffCoeff = 5; // this corresponds to 10 periods
// Deployment of v17 Hard Fork
consensus.vDeployments[Consensus::DEPLOYMENT_V17].bit = 6;
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nStartTime = 1606780800; // December 1st, 2020
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nTimeout = 1638316800; // December 1st, 2021
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nWindowSize = 100;
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nThresholdStart = 80; // 80% of 100
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nThresholdMin = 60; // 60% of 100
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nFalloffCoeff = 5; // this corresponds to 10 periods
Backport "assumed valid blocks" feature from Bitcoin 0.13 (#1582) * IBD check uses minimumchain work instead of checkpoints. This introduces a 'minimum chain work' chainparam which is intended to be the known amount of work in the chain for the network at the time of software release. If you don't have this much work, you're not yet caught up. This is used instead of the count of blocks test from checkpoints. This criteria is trivial to keep updated as there is no element of subjectivity, trust, or position dependence to it. It is also a more reliable metric of sync status than a block count. * Remove GetTotalBlocksEstimate and checkpoint tests that test nothing. GetTotalBlocksEstimate is no longer used and it was the only thing the checkpoint tests were testing. Since checkpoints are on their way out it makes more sense to remove the test file than to cook up a new pointless test. # Conflicts: # src/Makefile.test.include # src/test/Checkpoints_tests.cpp * IsInitialBlockDownload no longer uses header-only timestamps. This avoids a corner case (mostly visible on testnet) where bogus headers can keep nodes in IsInitialBlockDownload. * Delay parallel block download until chain has sufficient work nMinimumChainWork is an anti-DoS threshold; wait until we have a proposed tip with more work than that before downloading blocks towards that tip. * Add timeout for headers sync At startup, we choose one peer to serve us the headers chain, until our best header is close to caught up. Disconnect this peer if more than 15 minutes + 1ms/expected_header passes and our best header is still more than 1 day away from current time. * Introduce assumevalid setting to skip presumed valid scripts. This disentangles the script validation skipping from checkpoints. A new option is introduced "assumevalid" which specifies a block whos ancestors we assume all have valid scriptsigs and so we do not check them when they are also burried under the best header by two weeks worth of work. Unlike checkpoints this has no influence on consensus unless you set it to a block with an invalid history. Because of this it can be easily be updated without risk of influencing the network consensus. This results in a massive IBD speedup. This approach was independently recommended by Peter Todd and Luke-Jr since POW based signature skipping (see PR#9180) does not have the verifiable properties of a specific hash and may create bad incentives. The downside is that, like checkpoints, the defaults bitrot and older releases will sync slower. On the plus side users can provide their own value here, and if they set it to something crazy all that will happen is more time will be spend validating signatures. Checkblocks and checklevel are also moved to the hidden debug options: Especially now that checkblocks has a low default there is little need to change these settings, and users frequently misunderstand them as influencing security or IBD speed. By hiding them we offset the space added by this new option. * Add consensusParams to FindNextBlocksToDownload * Adjust check in headers timeout logic to align with 144 blocks in Dash
2017-08-23 16:21:08 +02:00
// The best chain should have at least this much work.
consensus.nMinimumChainWork = uint256S("0x000000000000000000000000000000000000000000000000022f13324cfe06a3"); // 395750
Backport "assumed valid blocks" feature from Bitcoin 0.13 (#1582) * IBD check uses minimumchain work instead of checkpoints. This introduces a 'minimum chain work' chainparam which is intended to be the known amount of work in the chain for the network at the time of software release. If you don't have this much work, you're not yet caught up. This is used instead of the count of blocks test from checkpoints. This criteria is trivial to keep updated as there is no element of subjectivity, trust, or position dependence to it. It is also a more reliable metric of sync status than a block count. * Remove GetTotalBlocksEstimate and checkpoint tests that test nothing. GetTotalBlocksEstimate is no longer used and it was the only thing the checkpoint tests were testing. Since checkpoints are on their way out it makes more sense to remove the test file than to cook up a new pointless test. # Conflicts: # src/Makefile.test.include # src/test/Checkpoints_tests.cpp * IsInitialBlockDownload no longer uses header-only timestamps. This avoids a corner case (mostly visible on testnet) where bogus headers can keep nodes in IsInitialBlockDownload. * Delay parallel block download until chain has sufficient work nMinimumChainWork is an anti-DoS threshold; wait until we have a proposed tip with more work than that before downloading blocks towards that tip. * Add timeout for headers sync At startup, we choose one peer to serve us the headers chain, until our best header is close to caught up. Disconnect this peer if more than 15 minutes + 1ms/expected_header passes and our best header is still more than 1 day away from current time. * Introduce assumevalid setting to skip presumed valid scripts. This disentangles the script validation skipping from checkpoints. A new option is introduced "assumevalid" which specifies a block whos ancestors we assume all have valid scriptsigs and so we do not check them when they are also burried under the best header by two weeks worth of work. Unlike checkpoints this has no influence on consensus unless you set it to a block with an invalid history. Because of this it can be easily be updated without risk of influencing the network consensus. This results in a massive IBD speedup. This approach was independently recommended by Peter Todd and Luke-Jr since POW based signature skipping (see PR#9180) does not have the verifiable properties of a specific hash and may create bad incentives. The downside is that, like checkpoints, the defaults bitrot and older releases will sync slower. On the plus side users can provide their own value here, and if they set it to something crazy all that will happen is more time will be spend validating signatures. Checkblocks and checklevel are also moved to the hidden debug options: Especially now that checkblocks has a low default there is little need to change these settings, and users frequently misunderstand them as influencing security or IBD speed. By hiding them we offset the space added by this new option. * Add consensusParams to FindNextBlocksToDownload * Adjust check in headers timeout logic to align with 144 blocks in Dash
2017-08-23 16:21:08 +02:00
// By default assume that the signatures in ancestors of this block are valid.
consensus.defaultAssumeValid = uint256S("0x000008b78b6aef3fd05ab78db8b76c02163e885305545144420cb08704dce538"); // 395750
Backport "assumed valid blocks" feature from Bitcoin 0.13 (#1582) * IBD check uses minimumchain work instead of checkpoints. This introduces a 'minimum chain work' chainparam which is intended to be the known amount of work in the chain for the network at the time of software release. If you don't have this much work, you're not yet caught up. This is used instead of the count of blocks test from checkpoints. This criteria is trivial to keep updated as there is no element of subjectivity, trust, or position dependence to it. It is also a more reliable metric of sync status than a block count. * Remove GetTotalBlocksEstimate and checkpoint tests that test nothing. GetTotalBlocksEstimate is no longer used and it was the only thing the checkpoint tests were testing. Since checkpoints are on their way out it makes more sense to remove the test file than to cook up a new pointless test. # Conflicts: # src/Makefile.test.include # src/test/Checkpoints_tests.cpp * IsInitialBlockDownload no longer uses header-only timestamps. This avoids a corner case (mostly visible on testnet) where bogus headers can keep nodes in IsInitialBlockDownload. * Delay parallel block download until chain has sufficient work nMinimumChainWork is an anti-DoS threshold; wait until we have a proposed tip with more work than that before downloading blocks towards that tip. * Add timeout for headers sync At startup, we choose one peer to serve us the headers chain, until our best header is close to caught up. Disconnect this peer if more than 15 minutes + 1ms/expected_header passes and our best header is still more than 1 day away from current time. * Introduce assumevalid setting to skip presumed valid scripts. This disentangles the script validation skipping from checkpoints. A new option is introduced "assumevalid" which specifies a block whos ancestors we assume all have valid scriptsigs and so we do not check them when they are also burried under the best header by two weeks worth of work. Unlike checkpoints this has no influence on consensus unless you set it to a block with an invalid history. Because of this it can be easily be updated without risk of influencing the network consensus. This results in a massive IBD speedup. This approach was independently recommended by Peter Todd and Luke-Jr since POW based signature skipping (see PR#9180) does not have the verifiable properties of a specific hash and may create bad incentives. The downside is that, like checkpoints, the defaults bitrot and older releases will sync slower. On the plus side users can provide their own value here, and if they set it to something crazy all that will happen is more time will be spend validating signatures. Checkblocks and checklevel are also moved to the hidden debug options: Especially now that checkblocks has a low default there is little need to change these settings, and users frequently misunderstand them as influencing security or IBD speed. By hiding them we offset the space added by this new option. * Add consensusParams to FindNextBlocksToDownload * Adjust check in headers timeout logic to align with 144 blocks in Dash
2017-08-23 16:21:08 +02:00
pchMessageStart[0] = 0xce;
pchMessageStart[1] = 0xe2;
pchMessageStart[2] = 0xca;
pchMessageStart[3] = 0xff;
nDefaultPort = 19999;
nPruneAfterHeight = 1000;
2016-12-14 14:33:46 +01:00
genesis = CreateGenesisBlock(1390666206UL, 3861367235UL, 0x1e0ffff0, 1, 50 * COIN);
consensus.hashGenesisBlock = genesis.GetHash();
assert(consensus.hashGenesisBlock == uint256S("0x00000bafbc94add76cb75e2ec92894837288a481e5c005f6563d91623bf8bc2c"));
assert(genesis.hashMerkleRoot == uint256S("0xe0028eb9648db56b1ac77cf090b99048a8007e2bb64b68f092c03c7f56a662c7"));
vFixedSeeds.clear();
vFixedSeeds = std::vector<SeedSpec6>(pnSeed6_test, pnSeed6_test + ARRAYLEN(pnSeed6_test));
vSeeds.clear();
// nodes with support for servicebits filtering should be at the top
vSeeds.emplace_back("testnet-seed.dashdot.io"); // Just a static list of stable node(s), only supports x9
// Testnet Dash addresses start with 'y'
base58Prefixes[PUBKEY_ADDRESS] = std::vector<unsigned char>(1,140);
// Testnet Dash script addresses start with '8' or '9'
base58Prefixes[SCRIPT_ADDRESS] = std::vector<unsigned char>(1,19);
// Testnet private keys start with '9' or 'c' (Bitcoin defaults)
base58Prefixes[SECRET_KEY] = std::vector<unsigned char>(1,239);
// Testnet Dash BIP32 pubkeys start with 'tpub' (Bitcoin defaults)
base58Prefixes[EXT_PUBLIC_KEY] = {0x04, 0x35, 0x87, 0xCF};
// Testnet Dash BIP32 prvkeys start with 'tprv' (Bitcoin defaults)
base58Prefixes[EXT_SECRET_KEY] = {0x04, 0x35, 0x83, 0x94};
HD wallet (#1405) * HD wallet Minimal set of changes (no refactoring) backported from Bitcoin upstream to make HD wallets work in Dash 0.12.1.x+ * minimal bip44 (hardcoded account and change) * minimal bip39 Additional cmd-line options for new wallet: -mnemonic -mnemonicpassphrase * Do not recreate HD wallet on encryption Adjusted keypool.py test * Do not store any private keys for hd wallet besides the master one Derive all keys on the fly. Original idea/implementation - btc PR9298, backported and improved * actually use bip39 * pbkdf2 test * backport wallet-hd.py test * Allow specifying hd seed, add dumphdseed rpc, fix bugs - -hdseed cmd-line param to specify HD seed on wallet creation - dumphdseed rpc to dump HD seed - allow seed of any size - fix dumpwallet rpc bug (wasn't decrypting HD seed) - print HD seed and extended public masterkey on dumpwallet * top up keypool on HD wallet encryption * split HD chain: external/internal * add missing cs_wallet lock in init.cpp * fix `const char *` issues (use strings) * default mnemonic passphrase is an empty string in all cases * store mnemonic/mnemonicpassphrase replace dumphdseed with dumphdinfo * Add fCrypted flag to CHDChain * prepare internal structures for multiple HD accounts (plus some code cleanup) * use secure allocator for storing sensitive HD data * use secure strings for mnemonic(passphrase) * small fix in GenerateNewHDChain * use 24 words for mnemonic by default * make sure mnemonic passphrase provided by user does not exceed 256 symbols * more usage of secure allocators and memory_cleanse * code cleanup * rename: CSecureVector -> SecureVector * add missing include * fix warning in rpcdump.cpp * refactor mnemonic_check (also fix a bug) * move bip39 functions to CMnemonic * Few fixes for CMnemonic: - use `SecureVector` for data, bits, seed - `Check` should return bool * init vectors with desired size where possible
2017-05-29 13:51:40 +02:00
// Testnet Dash BIP44 coin type is '1' (All coin's testnet default)
HD wallet (#1405) * HD wallet Minimal set of changes (no refactoring) backported from Bitcoin upstream to make HD wallets work in Dash 0.12.1.x+ * minimal bip44 (hardcoded account and change) * minimal bip39 Additional cmd-line options for new wallet: -mnemonic -mnemonicpassphrase * Do not recreate HD wallet on encryption Adjusted keypool.py test * Do not store any private keys for hd wallet besides the master one Derive all keys on the fly. Original idea/implementation - btc PR9298, backported and improved * actually use bip39 * pbkdf2 test * backport wallet-hd.py test * Allow specifying hd seed, add dumphdseed rpc, fix bugs - -hdseed cmd-line param to specify HD seed on wallet creation - dumphdseed rpc to dump HD seed - allow seed of any size - fix dumpwallet rpc bug (wasn't decrypting HD seed) - print HD seed and extended public masterkey on dumpwallet * top up keypool on HD wallet encryption * split HD chain: external/internal * add missing cs_wallet lock in init.cpp * fix `const char *` issues (use strings) * default mnemonic passphrase is an empty string in all cases * store mnemonic/mnemonicpassphrase replace dumphdseed with dumphdinfo * Add fCrypted flag to CHDChain * prepare internal structures for multiple HD accounts (plus some code cleanup) * use secure allocator for storing sensitive HD data * use secure strings for mnemonic(passphrase) * small fix in GenerateNewHDChain * use 24 words for mnemonic by default * make sure mnemonic passphrase provided by user does not exceed 256 symbols * more usage of secure allocators and memory_cleanse * code cleanup * rename: CSecureVector -> SecureVector * add missing include * fix warning in rpcdump.cpp * refactor mnemonic_check (also fix a bug) * move bip39 functions to CMnemonic * Few fixes for CMnemonic: - use `SecureVector` for data, bits, seed - `Check` should return bool * init vectors with desired size where possible
2017-05-29 13:51:40 +02:00
nExtCoinType = 1;
Implement and enforce DIP6 commitments (#2477) * Add LLMQ parameters to consensus params * Add DIP6 quorum commitment special TX * Implement CQuorumBlockProcessor which validates and handles commitments * Add quorum commitments to new blocks * Propagate QFCOMMITMENT messages to all nodes * Allow special transactions in blocks which have no inputs/outputs But only for TRANSACTION_QUORUM_COMMITMENT for now. * Add quorum commitments to self-crafted blocks in DIP3 tests * Add simple fork logic for current testnet This should avoid a fork on the current testnet. It only applies to the current chain which activated DIP3 at height 264000 and block 00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f. When we revert the chain to retest the DIP3 deployment, this fork logic can be removed again. * Use quorumVvecHash instead of quorumHash to make null commitments unique Implementation of https://github.com/dashpay/dips/pull/31 * Re-add quorum commitments after pruning mempool selected blocks * Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements Also add BEGIN/END markers for temporary code. * Add comments/documentation to LLMQParams * Move code which determines if a commitment is required into IsCommitmentRequired This should make the code easier to read and also removes some duplication. The also changes the error types that are possible from 3 to 2 now. Instead of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is only "bad-qc-not-allowed" now. * Use new parameter from consensus parames for the temporary fork
2018-11-23 15:42:09 +01:00
// long living quorum params
consensus.llmqs[Consensus::LLMQ_50_60] = llmq50_60;
consensus.llmqs[Consensus::LLMQ_400_60] = llmq400_60;
consensus.llmqs[Consensus::LLMQ_400_85] = llmq400_85;
consensus.llmqs[Consensus::LLMQ_100_67] = llmq100_67;
consensus.llmqTypeChainLocks = Consensus::LLMQ_50_60;
consensus.llmqTypeInstantSend = Consensus::LLMQ_50_60;
consensus.llmqTypePlatform = Consensus::LLMQ_100_67;
Implement and enforce DIP6 commitments (#2477) * Add LLMQ parameters to consensus params * Add DIP6 quorum commitment special TX * Implement CQuorumBlockProcessor which validates and handles commitments * Add quorum commitments to new blocks * Propagate QFCOMMITMENT messages to all nodes * Allow special transactions in blocks which have no inputs/outputs But only for TRANSACTION_QUORUM_COMMITMENT for now. * Add quorum commitments to self-crafted blocks in DIP3 tests * Add simple fork logic for current testnet This should avoid a fork on the current testnet. It only applies to the current chain which activated DIP3 at height 264000 and block 00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f. When we revert the chain to retest the DIP3 deployment, this fork logic can be removed again. * Use quorumVvecHash instead of quorumHash to make null commitments unique Implementation of https://github.com/dashpay/dips/pull/31 * Re-add quorum commitments after pruning mempool selected blocks * Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements Also add BEGIN/END markers for temporary code. * Add comments/documentation to LLMQParams * Move code which determines if a commitment is required into IsCommitmentRequired This should make the code easier to read and also removes some duplication. The also changes the error types that are possible from 3 to 2 now. Instead of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is only "bad-qc-not-allowed" now. * Use new parameter from consensus parames for the temporary fork
2018-11-23 15:42:09 +01:00
fDefaultConsistencyChecks = false;
fRequireStandard = false;
fRequireRoutableExternalIP = true;
fMineBlocksOnDemand = false;
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
fAllowMultipleAddressesFromGroup = false;
fAllowMultiplePorts = true;
nLLMQConnectionRetryTimeout = 60;
2015-04-03 00:51:08 +02:00
nPoolMinParticipants = 2;
nPoolMaxParticipants = 20;
nFulfilledRequestExpireTime = 5*60; // fulfilled requests expire in 5 minutes
vSporkAddresses = {"yjPtiKh2uwk3bDutTEA2q9mCtXyiZRWn55"};
nMinSporkKeys = 1;
fBIP9CheckMasternodesUpgraded = true;
checkpointData = {
{
{261, uint256S("0x00000c26026d0815a7e2ce4fa270775f61403c040647ff2c3091f99e894a4618")},
{1999, uint256S("0x00000052e538d27fa53693efe6fb6892a0c1d26c0235f599171c48a3cce553b1")},
{2999, uint256S("0x0000024bc3f4f4cb30d29827c13d921ad77d2c6072e586c7f60d83c2722cdcc5")},
{96090, uint256S("0x00000000033df4b94d17ab43e999caaf6c4735095cc77703685da81254d09bba")},
{200000, uint256S("0x000000001015eb5ef86a8fe2b3074d947bc972c5befe32b28dd5ce915dc0d029")},
{395750, uint256S("0x000008b78b6aef3fd05ab78db8b76c02163e885305545144420cb08704dce538")},
}
};
chainTxData = ChainTxData{
1601053246, // * UNIX timestamp of last known number of transactions (Block 387900)
3326586, // * total number of transactions between genesis and that timestamp
// (the tx=... number in the SetBestChain debug.log lines)
0.02 // * estimated number of transactions per second after that timestamp
};
}
};
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
/**
* Devnet
*/
class CDevNetParams : public CChainParams {
public:
CDevNetParams() {
strNetworkID = "devnet";
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
consensus.nSubsidyHalvingInterval = 210240;
consensus.nMasternodePaymentsStartBlock = 4010; // not true, but it's ok as long as it's less then nMasternodePaymentsIncreaseBlock
consensus.nMasternodePaymentsIncreaseBlock = 4030;
consensus.nMasternodePaymentsIncreasePeriod = 10;
consensus.nInstantSendConfirmationsRequired = 2;
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
consensus.nInstantSendKeepLock = 6;
consensus.nBudgetPaymentsStartBlock = 4100;
consensus.nBudgetPaymentsCycleBlocks = 50;
consensus.nBudgetPaymentsWindowBlocks = 10;
consensus.nSuperblockStartBlock = 4200; // NOTE: Should satisfy nSuperblockStartBlock > nBudgetPeymentsStartBlock
consensus.nSuperblockStartHash = uint256(); // do not check this on devnet
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
consensus.nSuperblockCycle = 24; // Superblocks can be issued hourly on devnet
consensus.nGovernanceMinQuorum = 1;
consensus.nGovernanceFilterElements = 500;
consensus.nMasternodeMinimumConfirmations = 1;
consensus.BIP34Height = 1; // BIP34 activated immediately on devnet
consensus.BIP65Height = 1; // BIP65 activated immediately on devnet
consensus.BIP66Height = 1; // BIP66 activated immediately on devnet
consensus.DIP0001Height = 2; // DIP0001 activated immediately on devnet
consensus.DIP0003Height = 2; // DIP0003 activated immediately on devnet
consensus.DIP0003EnforcementHeight = 2; // DIP0003 activated immediately on devnet
consensus.DIP0003EnforcementHash = uint256();
A pack of small fixes (#1992) * Make sure gobject collateral was mined `CGovernanceObject::IsCollateralValid()` would still fail for non-mined collateral later trying to check confirmations * Fix powLimit for mainnet/testnet That's a legacy thing, slightly rising it to match the actual bit-shifted value has no effect because real values are already lower. Also clarify values for all networks in comments. * Check for script addresses in CSuperblock::ParsePaymentSchedule() Sentinel should already be downvoting such triggers if they would exist, no need to store/relay them. * Do not process already known valid vote twice in CGovernanceObject::ProcessVote() This should be handled by `CGovernanceManager::ProcessVote()` but imo it's better to have this at the `CGovernanceObject::ProcessVote()` level as well. * Make sure CGovernanceObjectVoteFile::AddVote() never adds/updates already known votes The way `CGovernanceObjectVoteFile::AddVote()` is used (i.e. wrapped in `CGovernanceObjectVoteFile::HasVote()` condition) it's already the case. Hoever nothing would guarantee consistency if it would be used elsewhere without such wrapper, so it's better to have similar check inside. * Do not even try mnb recovery when -connect is set `CConnman::ThreadOpenMasternodeConnections()` thread won't even start when `-connect` is set, so no need to ask for recovery, there is nothing that is going to be able to process such request. * No need for SIGHASH_ANYONECANPAY in PS collateral signature Collateral is just a normal tx created and signed by each participant individually, there is no need for special sig types. * Release semMasternodeOutbound in CConnman::Interrupt() Re-align Dash code with Bitcoin.
2018-03-19 14:08:32 +01:00
consensus.powLimit = uint256S("7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff"); // ~uint256(0) >> 1
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
consensus.nPowTargetTimespan = 24 * 60 * 60; // Dash: 1 day
consensus.nPowTargetSpacing = 2.5 * 60; // Dash: 2.5 minutes
consensus.fPowAllowMinDifficultyBlocks = true;
consensus.fPowNoRetargeting = false;
consensus.nPowKGWHeight = 4001; // nPowKGWHeight >= nPowDGWHeight means "no KGW"
consensus.nPowDGWHeight = 4001;
consensus.nRuleChangeActivationThreshold = 1512; // 75% for testchains
consensus.nMinerConfirmationWindow = 2016; // nPowTargetTimespan / nPowTargetSpacing
consensus.vDeployments[Consensus::DEPLOYMENT_TESTDUMMY].bit = 28;
consensus.vDeployments[Consensus::DEPLOYMENT_TESTDUMMY].nStartTime = 1199145601; // January 1, 2008
consensus.vDeployments[Consensus::DEPLOYMENT_TESTDUMMY].nTimeout = 1230767999; // December 31, 2008
// Deployment of BIP68, BIP112, and BIP113.
consensus.vDeployments[Consensus::DEPLOYMENT_CSV].bit = 0;
consensus.vDeployments[Consensus::DEPLOYMENT_CSV].nStartTime = 1506556800; // September 28th, 2017
consensus.vDeployments[Consensus::DEPLOYMENT_CSV].nTimeout = 1538092800; // September 28th, 2018
// Deployment of DIP0001
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0001].bit = 1;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0001].nStartTime = 1505692800; // Sep 18th, 2017
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0001].nTimeout = 1537228800; // Sep 18th, 2018
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0001].nWindowSize = 100;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0001].nThresholdStart = 50; // 50% of 100
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
2018-01-30 20:18:51 +01:00
// Deployment of BIP147
consensus.vDeployments[Consensus::DEPLOYMENT_BIP147].bit = 2;
consensus.vDeployments[Consensus::DEPLOYMENT_BIP147].nStartTime = 1517792400; // Feb 5th, 2018
consensus.vDeployments[Consensus::DEPLOYMENT_BIP147].nTimeout = 1549328400; // Feb 5th, 2019
consensus.vDeployments[Consensus::DEPLOYMENT_BIP147].nWindowSize = 100;
consensus.vDeployments[Consensus::DEPLOYMENT_BIP147].nThresholdStart = 50; // 50% of 100
2018-01-30 20:18:51 +01:00
2018-02-14 21:31:42 +01:00
// Deployment of DIP0003
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0003].bit = 3;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0003].nStartTime = 1535752800; // Sep 1st, 2018
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0003].nTimeout = 1567288800; // Sep 1st, 2019
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0003].nWindowSize = 100;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0003].nThresholdStart = 50; // 50% of 100
2018-02-14 21:31:42 +01:00
// Deployment of DIP0008
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0008].bit = 4;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0008].nStartTime = 1553126400; // Mar 21st, 2019
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0008].nTimeout = 1900281600; // Mar 21st, 2030
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0008].nWindowSize = 100;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0008].nThresholdStart = 50; // 50% of 100
// Deployment of Block Reward Reallocation
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].bit = 5;
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nStartTime = 1598918400; // Sep 1st, 2020
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nTimeout = 1900281600; // Mar 21st, 2030
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nWindowSize = 100;
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nThresholdStart = 80; // 80% of 100
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nThresholdMin = 60; // 60% of 100
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nFalloffCoeff = 5; // this corresponds to 10 periods
// Deployment of v17 Hard Fork
consensus.vDeployments[Consensus::DEPLOYMENT_V17].bit = 6;
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nStartTime = 1604188800; // November 1st, 2020
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nTimeout = 1635724800; // November 1st, 2021
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nWindowSize = 100;
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nThresholdStart = 80; // 80% of 100
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nThresholdMin = 60; // 60% of 100
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nFalloffCoeff = 5; // this corresponds to 10 periods
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
// The best chain should have at least this much work.
consensus.nMinimumChainWork = uint256S("0x000000000000000000000000000000000000000000000000000000000000000");
// By default assume that the signatures in ancestors of this block are valid.
consensus.defaultAssumeValid = uint256S("0x000000000000000000000000000000000000000000000000000000000000000");
pchMessageStart[0] = 0xe2;
pchMessageStart[1] = 0xca;
pchMessageStart[2] = 0xff;
pchMessageStart[3] = 0xce;
nDefaultPort = 19799;
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
nPruneAfterHeight = 1000;
genesis = CreateGenesisBlock(1417713337, 1096447, 0x207fffff, 1, 50 * COIN);
consensus.hashGenesisBlock = genesis.GetHash();
assert(consensus.hashGenesisBlock == uint256S("0x000008ca1832a4baf228eb1553c03d3a2c8e02399550dd6ea8d65cec3ef23d2e"));
assert(genesis.hashMerkleRoot == uint256S("0xe0028eb9648db56b1ac77cf090b99048a8007e2bb64b68f092c03c7f56a662c7"));
devnetGenesis = FindDevNetGenesisBlock(genesis, 50 * COIN);
consensus.hashDevnetGenesisBlock = devnetGenesis.GetHash();
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
vFixedSeeds.clear();
vSeeds.clear();
//vSeeds.push_back(CDNSSeedData("dashevo.org", "devnet-seed.dashevo.org"));
// Testnet Dash addresses start with 'y'
base58Prefixes[PUBKEY_ADDRESS] = std::vector<unsigned char>(1,140);
// Testnet Dash script addresses start with '8' or '9'
base58Prefixes[SCRIPT_ADDRESS] = std::vector<unsigned char>(1,19);
// Testnet private keys start with '9' or 'c' (Bitcoin defaults)
base58Prefixes[SECRET_KEY] = std::vector<unsigned char>(1,239);
// Testnet Dash BIP32 pubkeys start with 'tpub' (Bitcoin defaults)
base58Prefixes[EXT_PUBLIC_KEY] = {0x04, 0x35, 0x87, 0xCF};
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
// Testnet Dash BIP32 prvkeys start with 'tprv' (Bitcoin defaults)
base58Prefixes[EXT_SECRET_KEY] = {0x04, 0x35, 0x83, 0x94};
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
// Testnet Dash BIP44 coin type is '1' (All coin's testnet default)
nExtCoinType = 1;
Implement and enforce DIP6 commitments (#2477) * Add LLMQ parameters to consensus params * Add DIP6 quorum commitment special TX * Implement CQuorumBlockProcessor which validates and handles commitments * Add quorum commitments to new blocks * Propagate QFCOMMITMENT messages to all nodes * Allow special transactions in blocks which have no inputs/outputs But only for TRANSACTION_QUORUM_COMMITMENT for now. * Add quorum commitments to self-crafted blocks in DIP3 tests * Add simple fork logic for current testnet This should avoid a fork on the current testnet. It only applies to the current chain which activated DIP3 at height 264000 and block 00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f. When we revert the chain to retest the DIP3 deployment, this fork logic can be removed again. * Use quorumVvecHash instead of quorumHash to make null commitments unique Implementation of https://github.com/dashpay/dips/pull/31 * Re-add quorum commitments after pruning mempool selected blocks * Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements Also add BEGIN/END markers for temporary code. * Add comments/documentation to LLMQParams * Move code which determines if a commitment is required into IsCommitmentRequired This should make the code easier to read and also removes some duplication. The also changes the error types that are possible from 3 to 2 now. Instead of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is only "bad-qc-not-allowed" now. * Use new parameter from consensus parames for the temporary fork
2018-11-23 15:42:09 +01:00
// long living quorum params
consensus.llmqs[Consensus::LLMQ_DEVNET] = llmq_devnet;
Implement and enforce DIP6 commitments (#2477) * Add LLMQ parameters to consensus params * Add DIP6 quorum commitment special TX * Implement CQuorumBlockProcessor which validates and handles commitments * Add quorum commitments to new blocks * Propagate QFCOMMITMENT messages to all nodes * Allow special transactions in blocks which have no inputs/outputs But only for TRANSACTION_QUORUM_COMMITMENT for now. * Add quorum commitments to self-crafted blocks in DIP3 tests * Add simple fork logic for current testnet This should avoid a fork on the current testnet. It only applies to the current chain which activated DIP3 at height 264000 and block 00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f. When we revert the chain to retest the DIP3 deployment, this fork logic can be removed again. * Use quorumVvecHash instead of quorumHash to make null commitments unique Implementation of https://github.com/dashpay/dips/pull/31 * Re-add quorum commitments after pruning mempool selected blocks * Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements Also add BEGIN/END markers for temporary code. * Add comments/documentation to LLMQParams * Move code which determines if a commitment is required into IsCommitmentRequired This should make the code easier to read and also removes some duplication. The also changes the error types that are possible from 3 to 2 now. Instead of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is only "bad-qc-not-allowed" now. * Use new parameter from consensus parames for the temporary fork
2018-11-23 15:42:09 +01:00
consensus.llmqs[Consensus::LLMQ_50_60] = llmq50_60;
consensus.llmqs[Consensus::LLMQ_400_60] = llmq400_60;
consensus.llmqs[Consensus::LLMQ_400_85] = llmq400_85;
consensus.llmqs[Consensus::LLMQ_100_67] = llmq100_67;
consensus.llmqTypeChainLocks = Consensus::LLMQ_50_60;
consensus.llmqTypeInstantSend = Consensus::LLMQ_50_60;
consensus.llmqTypePlatform = Consensus::LLMQ_100_67;
Implement and enforce DIP6 commitments (#2477) * Add LLMQ parameters to consensus params * Add DIP6 quorum commitment special TX * Implement CQuorumBlockProcessor which validates and handles commitments * Add quorum commitments to new blocks * Propagate QFCOMMITMENT messages to all nodes * Allow special transactions in blocks which have no inputs/outputs But only for TRANSACTION_QUORUM_COMMITMENT for now. * Add quorum commitments to self-crafted blocks in DIP3 tests * Add simple fork logic for current testnet This should avoid a fork on the current testnet. It only applies to the current chain which activated DIP3 at height 264000 and block 00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f. When we revert the chain to retest the DIP3 deployment, this fork logic can be removed again. * Use quorumVvecHash instead of quorumHash to make null commitments unique Implementation of https://github.com/dashpay/dips/pull/31 * Re-add quorum commitments after pruning mempool selected blocks * Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements Also add BEGIN/END markers for temporary code. * Add comments/documentation to LLMQParams * Move code which determines if a commitment is required into IsCommitmentRequired This should make the code easier to read and also removes some duplication. The also changes the error types that are possible from 3 to 2 now. Instead of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is only "bad-qc-not-allowed" now. * Use new parameter from consensus parames for the temporary fork
2018-11-23 15:42:09 +01:00
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
fDefaultConsistencyChecks = false;
fRequireStandard = false;
fRequireRoutableExternalIP = true;
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
fMineBlocksOnDemand = false;
fAllowMultipleAddressesFromGroup = true;
fAllowMultiplePorts = true;
nLLMQConnectionRetryTimeout = 60;
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
nPoolMinParticipants = 2;
nPoolMaxParticipants = 20;
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
nFulfilledRequestExpireTime = 5*60; // fulfilled requests expire in 5 minutes
vSporkAddresses = {"yjPtiKh2uwk3bDutTEA2q9mCtXyiZRWn55"};
nMinSporkKeys = 1;
// devnets are started with no blocks and no MN, so we can't check for upgraded MN (as there are none)
fBIP9CheckMasternodesUpgraded = false;
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
checkpointData = (CCheckpointData) {
{
{ 0, uint256S("0x000008ca1832a4baf228eb1553c03d3a2c8e02399550dd6ea8d65cec3ef23d2e")},
{ 1, devnetGenesis.GetHash() },
}
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
};
chainTxData = ChainTxData{
2018-01-22 08:05:44 +01:00
devnetGenesis.GetBlockTime(), // * UNIX timestamp of devnet genesis block
2, // * we only have 2 coinbase transactions when a devnet is started up
0.01 // * estimated number of transactions per second
};
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
}
};
/**
* Regression test
*/
class CRegTestParams : public CChainParams {
public:
CRegTestParams() {
strNetworkID = "regtest";
consensus.nSubsidyHalvingInterval = 150;
consensus.nMasternodePaymentsStartBlock = 240;
consensus.nMasternodePaymentsIncreaseBlock = 350;
consensus.nMasternodePaymentsIncreasePeriod = 10;
consensus.nInstantSendConfirmationsRequired = 2;
consensus.nInstantSendKeepLock = 6;
consensus.nBudgetPaymentsStartBlock = 1000;
consensus.nBudgetPaymentsCycleBlocks = 50;
consensus.nBudgetPaymentsWindowBlocks = 10;
consensus.nSuperblockStartBlock = 1500;
consensus.nSuperblockStartHash = uint256(); // do not check this on regtest
consensus.nSuperblockCycle = 10;
consensus.nGovernanceMinQuorum = 1;
consensus.nGovernanceFilterElements = 100;
consensus.nMasternodeMinimumConfirmations = 1;
consensus.BIP34Height = 100000000; // BIP34 has not activated on regtest (far in the future so block v1 are not rejected in tests)
consensus.BIP34Hash = uint256();
consensus.BIP65Height = 1351; // BIP65 activated on regtest (Used in rpc activation tests)
consensus.BIP66Height = 1251; // BIP66 activated on regtest (Used in rpc activation tests)
consensus.DIP0001Height = 2000;
consensus.DIP0003Height = 432;
consensus.DIP0003EnforcementHeight = 500;
consensus.DIP0003EnforcementHash = uint256();
A pack of small fixes (#1992) * Make sure gobject collateral was mined `CGovernanceObject::IsCollateralValid()` would still fail for non-mined collateral later trying to check confirmations * Fix powLimit for mainnet/testnet That's a legacy thing, slightly rising it to match the actual bit-shifted value has no effect because real values are already lower. Also clarify values for all networks in comments. * Check for script addresses in CSuperblock::ParsePaymentSchedule() Sentinel should already be downvoting such triggers if they would exist, no need to store/relay them. * Do not process already known valid vote twice in CGovernanceObject::ProcessVote() This should be handled by `CGovernanceManager::ProcessVote()` but imo it's better to have this at the `CGovernanceObject::ProcessVote()` level as well. * Make sure CGovernanceObjectVoteFile::AddVote() never adds/updates already known votes The way `CGovernanceObjectVoteFile::AddVote()` is used (i.e. wrapped in `CGovernanceObjectVoteFile::HasVote()` condition) it's already the case. Hoever nothing would guarantee consistency if it would be used elsewhere without such wrapper, so it's better to have similar check inside. * Do not even try mnb recovery when -connect is set `CConnman::ThreadOpenMasternodeConnections()` thread won't even start when `-connect` is set, so no need to ask for recovery, there is nothing that is going to be able to process such request. * No need for SIGHASH_ANYONECANPAY in PS collateral signature Collateral is just a normal tx created and signed by each participant individually, there is no need for special sig types. * Release semMasternodeOutbound in CConnman::Interrupt() Re-align Dash code with Bitcoin.
2018-03-19 14:08:32 +01:00
consensus.powLimit = uint256S("7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff"); // ~uint256(0) >> 1
consensus.nPowTargetTimespan = 24 * 60 * 60; // Dash: 1 day
consensus.nPowTargetSpacing = 2.5 * 60; // Dash: 2.5 minutes
consensus.fPowAllowMinDifficultyBlocks = true;
consensus.fPowNoRetargeting = true;
consensus.nPowKGWHeight = 15200; // same as mainnet
consensus.nPowDGWHeight = 34140; // same as mainnet
consensus.nRuleChangeActivationThreshold = 108; // 75% for testchains
consensus.nMinerConfirmationWindow = 144; // Faster than normal for regtest (144 instead of 2016)
2016-03-09 22:00:53 +01:00
consensus.vDeployments[Consensus::DEPLOYMENT_TESTDUMMY].bit = 28;
consensus.vDeployments[Consensus::DEPLOYMENT_TESTDUMMY].nStartTime = 0;
consensus.vDeployments[Consensus::DEPLOYMENT_TESTDUMMY].nTimeout = 999999999999ULL;
consensus.vDeployments[Consensus::DEPLOYMENT_CSV].bit = 0;
consensus.vDeployments[Consensus::DEPLOYMENT_CSV].nStartTime = 0;
consensus.vDeployments[Consensus::DEPLOYMENT_CSV].nTimeout = 999999999999ULL;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0001].bit = 1;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0001].nStartTime = 0;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0001].nTimeout = 999999999999ULL;
2018-01-30 20:18:51 +01:00
consensus.vDeployments[Consensus::DEPLOYMENT_BIP147].bit = 2;
consensus.vDeployments[Consensus::DEPLOYMENT_BIP147].nStartTime = 0;
consensus.vDeployments[Consensus::DEPLOYMENT_BIP147].nTimeout = 999999999999ULL;
2018-02-14 21:31:42 +01:00
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0003].bit = 3;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0003].nStartTime = 0;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0003].nTimeout = 999999999999ULL;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0008].bit = 4;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0008].nStartTime = 0;
consensus.vDeployments[Consensus::DEPLOYMENT_DIP0008].nTimeout = 999999999999ULL;
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].bit = 5;
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nStartTime = 0;
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nTimeout = 999999999999ULL;
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nWindowSize = 500;
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nThresholdStart = 400; // 80%
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nThresholdMin = 300; // 60%
consensus.vDeployments[Consensus::DEPLOYMENT_REALLOC].nFalloffCoeff = 5;
consensus.vDeployments[Consensus::DEPLOYMENT_V17].bit = 6;
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nStartTime = 0;
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nTimeout = 999999999999ULL;
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nWindowSize = 100;
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nThresholdStart = 80;
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nThresholdMin = 60;
consensus.vDeployments[Consensus::DEPLOYMENT_V17].nFalloffCoeff = 5;
Backport "assumed valid blocks" feature from Bitcoin 0.13 (#1582) * IBD check uses minimumchain work instead of checkpoints. This introduces a 'minimum chain work' chainparam which is intended to be the known amount of work in the chain for the network at the time of software release. If you don't have this much work, you're not yet caught up. This is used instead of the count of blocks test from checkpoints. This criteria is trivial to keep updated as there is no element of subjectivity, trust, or position dependence to it. It is also a more reliable metric of sync status than a block count. * Remove GetTotalBlocksEstimate and checkpoint tests that test nothing. GetTotalBlocksEstimate is no longer used and it was the only thing the checkpoint tests were testing. Since checkpoints are on their way out it makes more sense to remove the test file than to cook up a new pointless test. # Conflicts: # src/Makefile.test.include # src/test/Checkpoints_tests.cpp * IsInitialBlockDownload no longer uses header-only timestamps. This avoids a corner case (mostly visible on testnet) where bogus headers can keep nodes in IsInitialBlockDownload. * Delay parallel block download until chain has sufficient work nMinimumChainWork is an anti-DoS threshold; wait until we have a proposed tip with more work than that before downloading blocks towards that tip. * Add timeout for headers sync At startup, we choose one peer to serve us the headers chain, until our best header is close to caught up. Disconnect this peer if more than 15 minutes + 1ms/expected_header passes and our best header is still more than 1 day away from current time. * Introduce assumevalid setting to skip presumed valid scripts. This disentangles the script validation skipping from checkpoints. A new option is introduced "assumevalid" which specifies a block whos ancestors we assume all have valid scriptsigs and so we do not check them when they are also burried under the best header by two weeks worth of work. Unlike checkpoints this has no influence on consensus unless you set it to a block with an invalid history. Because of this it can be easily be updated without risk of influencing the network consensus. This results in a massive IBD speedup. This approach was independently recommended by Peter Todd and Luke-Jr since POW based signature skipping (see PR#9180) does not have the verifiable properties of a specific hash and may create bad incentives. The downside is that, like checkpoints, the defaults bitrot and older releases will sync slower. On the plus side users can provide their own value here, and if they set it to something crazy all that will happen is more time will be spend validating signatures. Checkblocks and checklevel are also moved to the hidden debug options: Especially now that checkblocks has a low default there is little need to change these settings, and users frequently misunderstand them as influencing security or IBD speed. By hiding them we offset the space added by this new option. * Add consensusParams to FindNextBlocksToDownload * Adjust check in headers timeout logic to align with 144 blocks in Dash
2017-08-23 16:21:08 +02:00
// The best chain should have at least this much work.
consensus.nMinimumChainWork = uint256S("0x00");
// By default assume that the signatures in ancestors of this block are valid.
consensus.defaultAssumeValid = uint256S("0x00");
pchMessageStart[0] = 0xfc;
pchMessageStart[1] = 0xc1;
pchMessageStart[2] = 0xb7;
pchMessageStart[3] = 0xdc;
nDefaultPort = 19899;
nPruneAfterHeight = 1000;
genesis = CreateGenesisBlock(1417713337, 1096447, 0x207fffff, 1, 50 * COIN);
consensus.hashGenesisBlock = genesis.GetHash();
assert(consensus.hashGenesisBlock == uint256S("0x000008ca1832a4baf228eb1553c03d3a2c8e02399550dd6ea8d65cec3ef23d2e"));
assert(genesis.hashMerkleRoot == uint256S("0xe0028eb9648db56b1ac77cf090b99048a8007e2bb64b68f092c03c7f56a662c7"));
vFixedSeeds.clear(); //!< Regtest mode doesn't have any fixed seeds.
vSeeds.clear(); //!< Regtest mode doesn't have any DNS seeds.
fDefaultConsistencyChecks = true;
fRequireStandard = false;
fRequireRoutableExternalIP = false;
fMineBlocksOnDemand = true;
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
fAllowMultipleAddressesFromGroup = true;
fAllowMultiplePorts = true;
nLLMQConnectionRetryTimeout = 1; // must be lower then the LLMQ signing session timeout so that tests have control over failing behavior
nFulfilledRequestExpireTime = 5*60; // fulfilled requests expire in 5 minutes
nPoolMinParticipants = 2;
nPoolMaxParticipants = 20;
// privKey: cP4EKFyJsHT39LDqgdcB43Y3YXjNyjb5Fuas1GQSeAtjnZWmZEQK
vSporkAddresses = {"yj949n1UH6fDhw6HtVE5VMj2iSTaSWBMcW"};
nMinSporkKeys = 1;
// regtest usually has no masternodes in most tests, so don't check for upgraged MNs
fBIP9CheckMasternodesUpgraded = false;
checkpointData = {
{
{0, uint256S("0x000008ca1832a4baf228eb1553c03d3a2c8e02399550dd6ea8d65cec3ef23d2e")},
}
};
chainTxData = ChainTxData{
0,
0,
0
};
// Regtest Dash addresses start with 'y'
base58Prefixes[PUBKEY_ADDRESS] = std::vector<unsigned char>(1,140);
// Regtest Dash script addresses start with '8' or '9'
base58Prefixes[SCRIPT_ADDRESS] = std::vector<unsigned char>(1,19);
// Regtest private keys start with '9' or 'c' (Bitcoin defaults)
base58Prefixes[SECRET_KEY] = std::vector<unsigned char>(1,239);
// Regtest Dash BIP32 pubkeys start with 'tpub' (Bitcoin defaults)
base58Prefixes[EXT_PUBLIC_KEY] = {0x04, 0x35, 0x87, 0xCF};
// Regtest Dash BIP32 prvkeys start with 'tprv' (Bitcoin defaults)
base58Prefixes[EXT_SECRET_KEY] = {0x04, 0x35, 0x83, 0x94};
HD wallet (#1405) * HD wallet Minimal set of changes (no refactoring) backported from Bitcoin upstream to make HD wallets work in Dash 0.12.1.x+ * minimal bip44 (hardcoded account and change) * minimal bip39 Additional cmd-line options for new wallet: -mnemonic -mnemonicpassphrase * Do not recreate HD wallet on encryption Adjusted keypool.py test * Do not store any private keys for hd wallet besides the master one Derive all keys on the fly. Original idea/implementation - btc PR9298, backported and improved * actually use bip39 * pbkdf2 test * backport wallet-hd.py test * Allow specifying hd seed, add dumphdseed rpc, fix bugs - -hdseed cmd-line param to specify HD seed on wallet creation - dumphdseed rpc to dump HD seed - allow seed of any size - fix dumpwallet rpc bug (wasn't decrypting HD seed) - print HD seed and extended public masterkey on dumpwallet * top up keypool on HD wallet encryption * split HD chain: external/internal * add missing cs_wallet lock in init.cpp * fix `const char *` issues (use strings) * default mnemonic passphrase is an empty string in all cases * store mnemonic/mnemonicpassphrase replace dumphdseed with dumphdinfo * Add fCrypted flag to CHDChain * prepare internal structures for multiple HD accounts (plus some code cleanup) * use secure allocator for storing sensitive HD data * use secure strings for mnemonic(passphrase) * small fix in GenerateNewHDChain * use 24 words for mnemonic by default * make sure mnemonic passphrase provided by user does not exceed 256 symbols * more usage of secure allocators and memory_cleanse * code cleanup * rename: CSecureVector -> SecureVector * add missing include * fix warning in rpcdump.cpp * refactor mnemonic_check (also fix a bug) * move bip39 functions to CMnemonic * Few fixes for CMnemonic: - use `SecureVector` for data, bits, seed - `Check` should return bool * init vectors with desired size where possible
2017-05-29 13:51:40 +02:00
// Regtest Dash BIP44 coin type is '1' (All coin's testnet default)
HD wallet (#1405) * HD wallet Minimal set of changes (no refactoring) backported from Bitcoin upstream to make HD wallets work in Dash 0.12.1.x+ * minimal bip44 (hardcoded account and change) * minimal bip39 Additional cmd-line options for new wallet: -mnemonic -mnemonicpassphrase * Do not recreate HD wallet on encryption Adjusted keypool.py test * Do not store any private keys for hd wallet besides the master one Derive all keys on the fly. Original idea/implementation - btc PR9298, backported and improved * actually use bip39 * pbkdf2 test * backport wallet-hd.py test * Allow specifying hd seed, add dumphdseed rpc, fix bugs - -hdseed cmd-line param to specify HD seed on wallet creation - dumphdseed rpc to dump HD seed - allow seed of any size - fix dumpwallet rpc bug (wasn't decrypting HD seed) - print HD seed and extended public masterkey on dumpwallet * top up keypool on HD wallet encryption * split HD chain: external/internal * add missing cs_wallet lock in init.cpp * fix `const char *` issues (use strings) * default mnemonic passphrase is an empty string in all cases * store mnemonic/mnemonicpassphrase replace dumphdseed with dumphdinfo * Add fCrypted flag to CHDChain * prepare internal structures for multiple HD accounts (plus some code cleanup) * use secure allocator for storing sensitive HD data * use secure strings for mnemonic(passphrase) * small fix in GenerateNewHDChain * use 24 words for mnemonic by default * make sure mnemonic passphrase provided by user does not exceed 256 symbols * more usage of secure allocators and memory_cleanse * code cleanup * rename: CSecureVector -> SecureVector * add missing include * fix warning in rpcdump.cpp * refactor mnemonic_check (also fix a bug) * move bip39 functions to CMnemonic * Few fixes for CMnemonic: - use `SecureVector` for data, bits, seed - `Check` should return bool * init vectors with desired size where possible
2017-05-29 13:51:40 +02:00
nExtCoinType = 1;
Implement and enforce DIP6 commitments (#2477) * Add LLMQ parameters to consensus params * Add DIP6 quorum commitment special TX * Implement CQuorumBlockProcessor which validates and handles commitments * Add quorum commitments to new blocks * Propagate QFCOMMITMENT messages to all nodes * Allow special transactions in blocks which have no inputs/outputs But only for TRANSACTION_QUORUM_COMMITMENT for now. * Add quorum commitments to self-crafted blocks in DIP3 tests * Add simple fork logic for current testnet This should avoid a fork on the current testnet. It only applies to the current chain which activated DIP3 at height 264000 and block 00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f. When we revert the chain to retest the DIP3 deployment, this fork logic can be removed again. * Use quorumVvecHash instead of quorumHash to make null commitments unique Implementation of https://github.com/dashpay/dips/pull/31 * Re-add quorum commitments after pruning mempool selected blocks * Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements Also add BEGIN/END markers for temporary code. * Add comments/documentation to LLMQParams * Move code which determines if a commitment is required into IsCommitmentRequired This should make the code easier to read and also removes some duplication. The also changes the error types that are possible from 3 to 2 now. Instead of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is only "bad-qc-not-allowed" now. * Use new parameter from consensus parames for the temporary fork
2018-11-23 15:42:09 +01:00
// long living quorum params
consensus.llmqs[Consensus::LLMQ_TEST] = llmq_test;
consensus.llmqs[Consensus::LLMQ_TEST_V17] = llmq_test_v17;
consensus.llmqTypeChainLocks = Consensus::LLMQ_TEST;
consensus.llmqTypeInstantSend = Consensus::LLMQ_TEST;
consensus.llmqTypePlatform = Consensus::LLMQ_TEST;
Implement and enforce DIP6 commitments (#2477) * Add LLMQ parameters to consensus params * Add DIP6 quorum commitment special TX * Implement CQuorumBlockProcessor which validates and handles commitments * Add quorum commitments to new blocks * Propagate QFCOMMITMENT messages to all nodes * Allow special transactions in blocks which have no inputs/outputs But only for TRANSACTION_QUORUM_COMMITMENT for now. * Add quorum commitments to self-crafted blocks in DIP3 tests * Add simple fork logic for current testnet This should avoid a fork on the current testnet. It only applies to the current chain which activated DIP3 at height 264000 and block 00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f. When we revert the chain to retest the DIP3 deployment, this fork logic can be removed again. * Use quorumVvecHash instead of quorumHash to make null commitments unique Implementation of https://github.com/dashpay/dips/pull/31 * Re-add quorum commitments after pruning mempool selected blocks * Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements Also add BEGIN/END markers for temporary code. * Add comments/documentation to LLMQParams * Move code which determines if a commitment is required into IsCommitmentRequired This should make the code easier to read and also removes some duplication. The also changes the error types that are possible from 3 to 2 now. Instead of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is only "bad-qc-not-allowed" now. * Use new parameter from consensus parames for the temporary fork
2018-11-23 15:42:09 +01:00
}
};
static std::unique_ptr<CChainParams> globalChainParams;
const CChainParams &Params() {
assert(globalChainParams);
return *globalChainParams;
}
std::unique_ptr<CChainParams> CreateChainParams(const std::string& chain)
{
if (chain == CBaseChainParams::MAIN)
return std::unique_ptr<CChainParams>(new CMainParams());
else if (chain == CBaseChainParams::TESTNET)
return std::unique_ptr<CChainParams>(new CTestNetParams());
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
else if (chain == CBaseChainParams::DEVNET) {
return std::unique_ptr<CChainParams>(new CDevNetParams());
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
} else if (chain == CBaseChainParams::REGTEST)
return std::unique_ptr<CChainParams>(new CRegTestParams());
throw std::runtime_error(strprintf("%s: Unknown chain %s.", __func__, chain));
}
void SelectParams(const std::string& network)
{
SelectBaseParams(network);
globalChainParams = CreateChainParams(network);
}
void UpdateVersionBitsParameters(Consensus::DeploymentPos d, int64_t nStartTime, int64_t nTimeout, int64_t nWindowSize, int64_t nThresholdStart, int64_t nThresholdMin, int64_t nFalloffCoeff)
{
globalChainParams->UpdateVersionBitsParameters(d, nStartTime, nTimeout, nWindowSize, nThresholdStart, nThresholdMin, nFalloffCoeff);
}
void UpdateDIP3Parameters(int nActivationHeight, int nEnforcementHeight)
{
globalChainParams->UpdateDIP3Parameters(nActivationHeight, nEnforcementHeight);
}
void UpdateBudgetParameters(int nMasternodePaymentsStartBlock, int nBudgetPaymentsStartBlock, int nSuperblockStartBlock)
{
globalChainParams->UpdateBudgetParameters(nMasternodePaymentsStartBlock, nBudgetPaymentsStartBlock, nSuperblockStartBlock);
}
void UpdateDevnetSubsidyAndDiffParams(int nMinimumDifficultyBlocks, int nHighSubsidyBlocks, int nHighSubsidyFactor)
{
globalChainParams->UpdateSubsidyAndDiffParams(nMinimumDifficultyBlocks, nHighSubsidyBlocks, nHighSubsidyFactor);
}
void UpdateDevnetLLMQChainLocks(Consensus::LLMQType llmqType)
{
globalChainParams->UpdateLLMQChainLocks(llmqType);
}
void UpdateLLMQTestParams(int size, int threshold)
{
globalChainParams->UpdateLLMQTestParams(size, threshold);
}
void UpdateLLMQDevnetParams(int size, int threshold)
{
globalChainParams->UpdateLLMQDevnetParams(size, threshold);
}