dash/src/netaddress.h

518 lines
18 KiB
C
Raw Normal View History

// Copyright (c) 2009-2015 The Bitcoin Core developers
// Distributed under the MIT software license, see the accompanying
// file COPYING or http://www.opensource.org/licenses/mit-license.php.
#ifndef BITCOIN_NETADDRESS_H
#define BITCOIN_NETADDRESS_H
#if defined(HAVE_CONFIG_H)
Backport 11651 (#3358) * scripted-diff: Replace #include "" with #include <> (ryanofsky) -BEGIN VERIFY SCRIPT- for f in \ src/*.cpp \ src/*.h \ src/bench/*.cpp \ src/bench/*.h \ src/compat/*.cpp \ src/compat/*.h \ src/consensus/*.cpp \ src/consensus/*.h \ src/crypto/*.cpp \ src/crypto/*.h \ src/crypto/ctaes/*.h \ src/policy/*.cpp \ src/policy/*.h \ src/primitives/*.cpp \ src/primitives/*.h \ src/qt/*.cpp \ src/qt/*.h \ src/qt/test/*.cpp \ src/qt/test/*.h \ src/rpc/*.cpp \ src/rpc/*.h \ src/script/*.cpp \ src/script/*.h \ src/support/*.cpp \ src/support/*.h \ src/support/allocators/*.h \ src/test/*.cpp \ src/test/*.h \ src/wallet/*.cpp \ src/wallet/*.h \ src/wallet/test/*.cpp \ src/wallet/test/*.h \ src/zmq/*.cpp \ src/zmq/*.h do base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f done -END VERIFY SCRIPT- Signed-off-by: Pasta <pasta@dashboost.org> * scripted-diff: Replace #include "" with #include <> (Dash Specific) -BEGIN VERIFY SCRIPT- for f in \ src/bls/*.cpp \ src/bls/*.h \ src/evo/*.cpp \ src/evo/*.h \ src/governance/*.cpp \ src/governance/*.h \ src/llmq/*.cpp \ src/llmq/*.h \ src/masternode/*.cpp \ src/masternode/*.h \ src/privatesend/*.cpp \ src/privatesend/*.h do base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f done -END VERIFY SCRIPT- Signed-off-by: Pasta <pasta@dashboost.org> * build: Remove -I for everything but project root Remove -I from build system for everything but the project root, and built-in dependencies. Signed-off-by: Pasta <pasta@dashboost.org> # Conflicts: # src/Makefile.test.include * qt: refactor: Use absolute include paths in .ui files * qt: refactor: Changes to make include paths absolute This makes all include paths in the GUI absolute. Many changes are involved as every single source file in src/qt/ assumes to be able to use relative includes. Signed-off-by: Pasta <pasta@dashboost.org> # Conflicts: # src/qt/dash.cpp # src/qt/optionsmodel.cpp # src/qt/test/rpcnestedtests.cpp * test: refactor: Use absolute include paths for test data files * Recommend #include<> syntax in developer notes * refactor: Include obj/build.h instead of build.h * END BACKPORT #11651 Remove trailing whitespace causing travis failure * fix backport 11651 Signed-off-by: Pasta <pasta@dashboost.org> * More of 11651 * fix blockchain.cpp Signed-off-by: pasta <pasta@dashboost.org> * Add missing "qt/" in includes * Add missing "test/" in includes * Fix trailing whitespaces Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com> Co-authored-by: Russell Yanofsky <russ@yanofsky.org> Co-authored-by: MeshCollider <dobsonsa68@gmail.com> Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
2020-03-19 23:46:56 +01:00
#include <config/dash-config.h>
#endif
#include <attributes.h>
Backport 11651 (#3358) * scripted-diff: Replace #include "" with #include <> (ryanofsky) -BEGIN VERIFY SCRIPT- for f in \ src/*.cpp \ src/*.h \ src/bench/*.cpp \ src/bench/*.h \ src/compat/*.cpp \ src/compat/*.h \ src/consensus/*.cpp \ src/consensus/*.h \ src/crypto/*.cpp \ src/crypto/*.h \ src/crypto/ctaes/*.h \ src/policy/*.cpp \ src/policy/*.h \ src/primitives/*.cpp \ src/primitives/*.h \ src/qt/*.cpp \ src/qt/*.h \ src/qt/test/*.cpp \ src/qt/test/*.h \ src/rpc/*.cpp \ src/rpc/*.h \ src/script/*.cpp \ src/script/*.h \ src/support/*.cpp \ src/support/*.h \ src/support/allocators/*.h \ src/test/*.cpp \ src/test/*.h \ src/wallet/*.cpp \ src/wallet/*.h \ src/wallet/test/*.cpp \ src/wallet/test/*.h \ src/zmq/*.cpp \ src/zmq/*.h do base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f done -END VERIFY SCRIPT- Signed-off-by: Pasta <pasta@dashboost.org> * scripted-diff: Replace #include "" with #include <> (Dash Specific) -BEGIN VERIFY SCRIPT- for f in \ src/bls/*.cpp \ src/bls/*.h \ src/evo/*.cpp \ src/evo/*.h \ src/governance/*.cpp \ src/governance/*.h \ src/llmq/*.cpp \ src/llmq/*.h \ src/masternode/*.cpp \ src/masternode/*.h \ src/privatesend/*.cpp \ src/privatesend/*.h do base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f done -END VERIFY SCRIPT- Signed-off-by: Pasta <pasta@dashboost.org> * build: Remove -I for everything but project root Remove -I from build system for everything but the project root, and built-in dependencies. Signed-off-by: Pasta <pasta@dashboost.org> # Conflicts: # src/Makefile.test.include * qt: refactor: Use absolute include paths in .ui files * qt: refactor: Changes to make include paths absolute This makes all include paths in the GUI absolute. Many changes are involved as every single source file in src/qt/ assumes to be able to use relative includes. Signed-off-by: Pasta <pasta@dashboost.org> # Conflicts: # src/qt/dash.cpp # src/qt/optionsmodel.cpp # src/qt/test/rpcnestedtests.cpp * test: refactor: Use absolute include paths for test data files * Recommend #include<> syntax in developer notes * refactor: Include obj/build.h instead of build.h * END BACKPORT #11651 Remove trailing whitespace causing travis failure * fix backport 11651 Signed-off-by: Pasta <pasta@dashboost.org> * More of 11651 * fix blockchain.cpp Signed-off-by: pasta <pasta@dashboost.org> * Add missing "qt/" in includes * Add missing "test/" in includes * Fix trailing whitespaces Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com> Co-authored-by: Russell Yanofsky <russ@yanofsky.org> Co-authored-by: MeshCollider <dobsonsa68@gmail.com> Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
2020-03-19 23:46:56 +01:00
#include <compat.h>
#include <prevector.h>
Backport 11651 (#3358) * scripted-diff: Replace #include "" with #include <> (ryanofsky) -BEGIN VERIFY SCRIPT- for f in \ src/*.cpp \ src/*.h \ src/bench/*.cpp \ src/bench/*.h \ src/compat/*.cpp \ src/compat/*.h \ src/consensus/*.cpp \ src/consensus/*.h \ src/crypto/*.cpp \ src/crypto/*.h \ src/crypto/ctaes/*.h \ src/policy/*.cpp \ src/policy/*.h \ src/primitives/*.cpp \ src/primitives/*.h \ src/qt/*.cpp \ src/qt/*.h \ src/qt/test/*.cpp \ src/qt/test/*.h \ src/rpc/*.cpp \ src/rpc/*.h \ src/script/*.cpp \ src/script/*.h \ src/support/*.cpp \ src/support/*.h \ src/support/allocators/*.h \ src/test/*.cpp \ src/test/*.h \ src/wallet/*.cpp \ src/wallet/*.h \ src/wallet/test/*.cpp \ src/wallet/test/*.h \ src/zmq/*.cpp \ src/zmq/*.h do base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f done -END VERIFY SCRIPT- Signed-off-by: Pasta <pasta@dashboost.org> * scripted-diff: Replace #include "" with #include <> (Dash Specific) -BEGIN VERIFY SCRIPT- for f in \ src/bls/*.cpp \ src/bls/*.h \ src/evo/*.cpp \ src/evo/*.h \ src/governance/*.cpp \ src/governance/*.h \ src/llmq/*.cpp \ src/llmq/*.h \ src/masternode/*.cpp \ src/masternode/*.h \ src/privatesend/*.cpp \ src/privatesend/*.h do base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f done -END VERIFY SCRIPT- Signed-off-by: Pasta <pasta@dashboost.org> * build: Remove -I for everything but project root Remove -I from build system for everything but the project root, and built-in dependencies. Signed-off-by: Pasta <pasta@dashboost.org> # Conflicts: # src/Makefile.test.include * qt: refactor: Use absolute include paths in .ui files * qt: refactor: Changes to make include paths absolute This makes all include paths in the GUI absolute. Many changes are involved as every single source file in src/qt/ assumes to be able to use relative includes. Signed-off-by: Pasta <pasta@dashboost.org> # Conflicts: # src/qt/dash.cpp # src/qt/optionsmodel.cpp # src/qt/test/rpcnestedtests.cpp * test: refactor: Use absolute include paths for test data files * Recommend #include<> syntax in developer notes * refactor: Include obj/build.h instead of build.h * END BACKPORT #11651 Remove trailing whitespace causing travis failure * fix backport 11651 Signed-off-by: Pasta <pasta@dashboost.org> * More of 11651 * fix blockchain.cpp Signed-off-by: pasta <pasta@dashboost.org> * Add missing "qt/" in includes * Add missing "test/" in includes * Fix trailing whitespaces Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com> Co-authored-by: Russell Yanofsky <russ@yanofsky.org> Co-authored-by: MeshCollider <dobsonsa68@gmail.com> Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
2020-03-19 23:46:56 +01:00
#include <serialize.h>
#include <span.h>
#include <tinyformat.h>
merge bitcoin#14555: Move util files to directory (script modified to account for Dash backports, doesn't account for rebasing) ------------- BEGIN SCRIPT --------------- mkdir -p src/util git mv src/util.h src/util/system.h git mv src/util.cpp src/util/system.cpp git mv src/utilmemory.h src/util/memory.h git mv src/utilmoneystr.h src/util/moneystr.h git mv src/utilmoneystr.cpp src/util/moneystr.cpp git mv src/utilstrencodings.h src/util/strencodings.h git mv src/utilstrencodings.cpp src/util/strencodings.cpp git mv src/utiltime.h src/util/time.h git mv src/utiltime.cpp src/util/time.cpp git mv src/utilasmap.h src/util/asmap.h git mv src/utilasmap.cpp src/util/asmap.cpp git mv src/utilstring.h src/util/string.h git mv src/utilstring.cpp src/util/string.cpp gsed -i 's/<util\.h>/<util\/system\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp') gsed -i 's/<utilmemory\.h>/<util\/memory\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp') gsed -i 's/<utilmoneystr\.h>/<util\/moneystr\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp') gsed -i 's/<utilstrencodings\.h>/<util\/strencodings\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp') gsed -i 's/<utiltime\.h>/<util\/time\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp') gsed -i 's/<utilasmap\.h>/<util\/asmap\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp') gsed -i 's/<utilstring\.h>/<util\/string\.h>/g' $(git ls-files 'src/*.h' 'src/*.cpp') gsed -i 's/BITCOIN_UTIL_H/BITCOIN_UTIL_SYSTEM_H/g' src/util/system.h gsed -i 's/BITCOIN_UTILMEMORY_H/BITCOIN_UTIL_MEMORY_H/g' src/util/memory.h gsed -i 's/BITCOIN_UTILMONEYSTR_H/BITCOIN_UTIL_MONEYSTR_H/g' src/util/moneystr.h gsed -i 's/BITCOIN_UTILSTRENCODINGS_H/BITCOIN_UTIL_STRENCODINGS_H/g' src/util/strencodings.h gsed -i 's/BITCOIN_UTILTIME_H/BITCOIN_UTIL_TIME_H/g' src/util/time.h gsed -i 's/BITCOIN_UTILASMAP_H/BITCOIN_UTIL_ASMAP_H/g' src/util/asmap.h gsed -i 's/BITCOIN_UTILSTRING_H/BITCOIN_UTIL_STRING_H/g' src/util/string.h gsed -i 's/ util\.\(h\|cpp\)/ util\/system\.\1/g' src/Makefile.am gsed -i 's/utilmemory\.\(h\|cpp\)/util\/memory\.\1/g' src/Makefile.am gsed -i 's/utilmoneystr\.\(h\|cpp\)/util\/moneystr\.\1/g' src/Makefile.am gsed -i 's/utilstrencodings\.\(h\|cpp\)/util\/strencodings\.\1/g' src/Makefile.am gsed -i 's/utiltime\.\(h\|cpp\)/util\/time\.\1/g' src/Makefile.am gsed -i 's/utilasmap\.\(h\|cpp\)/util\/asmap\.\1/g' src/Makefile.am gsed -i 's/utilstring\.\(h\|cpp\)/util\/string\.\1/g' src/Makefile.am gsed -i 's/-> util ->/-> util\/system ->/' test/lint/lint-circular-dependencies.sh gsed -i 's/src\/util\.cpp/src\/util\/system\.cpp/g' test/lint/lint-format-strings.py test/lint/lint-locale-dependence.sh gsed -i 's/src\/utilmoneystr\.cpp/src\/util\/moneystr\.cpp/g' test/lint/lint-locale-dependence.sh gsed -i 's/src\/utilstrencodings\.\(h\|cpp\)/src\/util\/strencodings\.\1/g' test/lint/lint-locale-dependence.sh ------------- END SCRIPT ---------------
2021-06-27 08:33:13 +02:00
#include <util/strencodings.h>
#include <util/string.h>
#include <array>
#include <cstdint>
#include <ios>
#include <string>
#include <vector>
Implement named devnets (#1791) * Initial devnet * Move genesis block adding into its own method * Introduce -allowprivatenet to lift limitation on RFC1918 addresses Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed to be relayed. Also, masternodes won't start when the address is considered invalid. This is needed to test local devnet or regtest based networks. * Lift the requirement of minimum MN age for regtest/devnet * Implement named devnets This allows the creation of multiple independent devnets. Each one is identified by a name which is hardened into a "devnet genesis" block, which is automatically positioned at height 1. Validation rules will ensure that a node from devnet=test1 never be able to accept blocks from devnet=test2. This is done by checking the expected devnet genesis block. The genesis block of the devnet is the same as the one from regtest. This starts the devnet with a very low difficulty, allowing us to fill up needed balances for masternodes very fast. Also, the devnet name is put into the sub-version of the VERSION message. If a node connects to the wrong network, it will immediately be disconnected. * Allow to select multiple addresses from the same group in devnet/regtest The selection code normally only allows to select addresses from the same group (e.g. 192.168.x.x) once. This results in connecting to only a single node in devnet/regtest. * Show the devnet name in the title bar and on the loading screen * Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp * Remove unused/unneeded scripts from devnet geneses creation 1. OP_RETURN not needed in input script of devnet genesis 2. genesisOutputScript was unused * Fix copy/paste error in -allowprivatenet description * Improve -devnet parameter error handling - Only allow one of -devnet, -regtest or -testnet - Only allow -devnet=name to be specified once * Use different datadir for each devnet * Fix `devnet-devnet` issue * Fix devnet splashscreen (should use testnet img) * Avoid passing devNetName around (most of the time) * Remove nMaxTipAge from CDevNetParams Not present anymore after rebase on develop
2017-12-20 12:45:01 +01:00
extern bool fAllowPrivateNet;
/**
* A flag that is ORed into the protocol version to designate that addresses
* should be serialized in (unserialized from) v2 format (BIP155).
* Make sure that this does not collide with any of the values in `version.h`
*/
static const int ADDRV2_FORMAT = 0x20000000;
Merge #19534: net: save the network type explicitly in CNetAddr bcfebb6d5511ad4c156868bc799831ace628a225 net: save the network type explicitly in CNetAddr (Vasil Dimov) 100c64a95b518a6a19241aec4058b866a8872d9b net: document `enum Network` (Vasil Dimov) Pull request description: (chopped off from https://github.com/bitcoin/bitcoin/pull/19031 to ease review) Before this change, we would analyze the contents of `CNetAddr::ip[16]` in order to tell which type is an address. Change this by introducing a new member `CNetAddr::m_net` that explicitly tells the type of the address. This is necessary because in BIP155 we will not be able to tell the address type by just looking at its raw representation (e.g. both TORv3 and I2P are "seemingly random" 32 bytes). As a side effect of this change we no longer need to store IPv4 addresses encoded as IPv6 addresses - we can store them in proper 4 bytes (will be done in a separate commit). Also the code gets somewhat simplified - instead of `memcmp(ip, pchIPv4, sizeof(pchIPv4)) == 0` we can use `m_net == NET_IPV4`. ACKs for top commit: troygiorshev: reACK bcfebb6d5511ad4c156868bc799831ace628a225 via `git range-diff master 64897c5 bcfebb6` jonatack: re-ACK bcfebb6 per `git diff 662bb25 bcfebb6`, code review, debug build/tests clean, ran bitcoind. laanwj: Code review ACK bcfebb6d5511ad4c156868bc799831ace628a225 Tree-SHA512: 9347e2a50feac617a994bfb46a8f77e31c236bde882e4fd4f03eea4766cd5110216f5f3d24dee91d25218bab7f8bb6e1d2d6212a44db9e34594299fd6ff7606b Signed-off-by: pasta <pasta@dashboost.org> # Conflicts: # src/netaddress.cpp # src/netaddress.h
2020-07-29 13:31:10 +02:00
/**
* A network type.
* @note An address may belong to more than one network, for example `10.0.0.1`
* belongs to both `NET_UNROUTABLE` and `NET_IPV4`.
* Keep these sequential starting from 0 and `NET_MAX` as the last entry.
* We have loops like `for (int i = 0; i < NET_MAX; i++)` that expect to iterate
* over all enum values and also `GetExtNetwork()` "extends" this enum by
* introducing standalone constants starting from `NET_MAX`.
*/
enum Network
{
Merge #19534: net: save the network type explicitly in CNetAddr bcfebb6d5511ad4c156868bc799831ace628a225 net: save the network type explicitly in CNetAddr (Vasil Dimov) 100c64a95b518a6a19241aec4058b866a8872d9b net: document `enum Network` (Vasil Dimov) Pull request description: (chopped off from https://github.com/bitcoin/bitcoin/pull/19031 to ease review) Before this change, we would analyze the contents of `CNetAddr::ip[16]` in order to tell which type is an address. Change this by introducing a new member `CNetAddr::m_net` that explicitly tells the type of the address. This is necessary because in BIP155 we will not be able to tell the address type by just looking at its raw representation (e.g. both TORv3 and I2P are "seemingly random" 32 bytes). As a side effect of this change we no longer need to store IPv4 addresses encoded as IPv6 addresses - we can store them in proper 4 bytes (will be done in a separate commit). Also the code gets somewhat simplified - instead of `memcmp(ip, pchIPv4, sizeof(pchIPv4)) == 0` we can use `m_net == NET_IPV4`. ACKs for top commit: troygiorshev: reACK bcfebb6d5511ad4c156868bc799831ace628a225 via `git range-diff master 64897c5 bcfebb6` jonatack: re-ACK bcfebb6 per `git diff 662bb25 bcfebb6`, code review, debug build/tests clean, ran bitcoind. laanwj: Code review ACK bcfebb6d5511ad4c156868bc799831ace628a225 Tree-SHA512: 9347e2a50feac617a994bfb46a8f77e31c236bde882e4fd4f03eea4766cd5110216f5f3d24dee91d25218bab7f8bb6e1d2d6212a44db9e34594299fd6ff7606b Signed-off-by: pasta <pasta@dashboost.org> # Conflicts: # src/netaddress.cpp # src/netaddress.h
2020-07-29 13:31:10 +02:00
/// Addresses from these networks are not publicly routable on the global Internet.
NET_UNROUTABLE = 0,
Merge #19534: net: save the network type explicitly in CNetAddr bcfebb6d5511ad4c156868bc799831ace628a225 net: save the network type explicitly in CNetAddr (Vasil Dimov) 100c64a95b518a6a19241aec4058b866a8872d9b net: document `enum Network` (Vasil Dimov) Pull request description: (chopped off from https://github.com/bitcoin/bitcoin/pull/19031 to ease review) Before this change, we would analyze the contents of `CNetAddr::ip[16]` in order to tell which type is an address. Change this by introducing a new member `CNetAddr::m_net` that explicitly tells the type of the address. This is necessary because in BIP155 we will not be able to tell the address type by just looking at its raw representation (e.g. both TORv3 and I2P are "seemingly random" 32 bytes). As a side effect of this change we no longer need to store IPv4 addresses encoded as IPv6 addresses - we can store them in proper 4 bytes (will be done in a separate commit). Also the code gets somewhat simplified - instead of `memcmp(ip, pchIPv4, sizeof(pchIPv4)) == 0` we can use `m_net == NET_IPV4`. ACKs for top commit: troygiorshev: reACK bcfebb6d5511ad4c156868bc799831ace628a225 via `git range-diff master 64897c5 bcfebb6` jonatack: re-ACK bcfebb6 per `git diff 662bb25 bcfebb6`, code review, debug build/tests clean, ran bitcoind. laanwj: Code review ACK bcfebb6d5511ad4c156868bc799831ace628a225 Tree-SHA512: 9347e2a50feac617a994bfb46a8f77e31c236bde882e4fd4f03eea4766cd5110216f5f3d24dee91d25218bab7f8bb6e1d2d6212a44db9e34594299fd6ff7606b Signed-off-by: pasta <pasta@dashboost.org> # Conflicts: # src/netaddress.cpp # src/netaddress.h
2020-07-29 13:31:10 +02:00
/// IPv4
NET_IPV4,
Merge #19534: net: save the network type explicitly in CNetAddr bcfebb6d5511ad4c156868bc799831ace628a225 net: save the network type explicitly in CNetAddr (Vasil Dimov) 100c64a95b518a6a19241aec4058b866a8872d9b net: document `enum Network` (Vasil Dimov) Pull request description: (chopped off from https://github.com/bitcoin/bitcoin/pull/19031 to ease review) Before this change, we would analyze the contents of `CNetAddr::ip[16]` in order to tell which type is an address. Change this by introducing a new member `CNetAddr::m_net` that explicitly tells the type of the address. This is necessary because in BIP155 we will not be able to tell the address type by just looking at its raw representation (e.g. both TORv3 and I2P are "seemingly random" 32 bytes). As a side effect of this change we no longer need to store IPv4 addresses encoded as IPv6 addresses - we can store them in proper 4 bytes (will be done in a separate commit). Also the code gets somewhat simplified - instead of `memcmp(ip, pchIPv4, sizeof(pchIPv4)) == 0` we can use `m_net == NET_IPV4`. ACKs for top commit: troygiorshev: reACK bcfebb6d5511ad4c156868bc799831ace628a225 via `git range-diff master 64897c5 bcfebb6` jonatack: re-ACK bcfebb6 per `git diff 662bb25 bcfebb6`, code review, debug build/tests clean, ran bitcoind. laanwj: Code review ACK bcfebb6d5511ad4c156868bc799831ace628a225 Tree-SHA512: 9347e2a50feac617a994bfb46a8f77e31c236bde882e4fd4f03eea4766cd5110216f5f3d24dee91d25218bab7f8bb6e1d2d6212a44db9e34594299fd6ff7606b Signed-off-by: pasta <pasta@dashboost.org> # Conflicts: # src/netaddress.cpp # src/netaddress.h
2020-07-29 13:31:10 +02:00
/// IPv6
NET_IPV6,
Merge #19534: net: save the network type explicitly in CNetAddr bcfebb6d5511ad4c156868bc799831ace628a225 net: save the network type explicitly in CNetAddr (Vasil Dimov) 100c64a95b518a6a19241aec4058b866a8872d9b net: document `enum Network` (Vasil Dimov) Pull request description: (chopped off from https://github.com/bitcoin/bitcoin/pull/19031 to ease review) Before this change, we would analyze the contents of `CNetAddr::ip[16]` in order to tell which type is an address. Change this by introducing a new member `CNetAddr::m_net` that explicitly tells the type of the address. This is necessary because in BIP155 we will not be able to tell the address type by just looking at its raw representation (e.g. both TORv3 and I2P are "seemingly random" 32 bytes). As a side effect of this change we no longer need to store IPv4 addresses encoded as IPv6 addresses - we can store them in proper 4 bytes (will be done in a separate commit). Also the code gets somewhat simplified - instead of `memcmp(ip, pchIPv4, sizeof(pchIPv4)) == 0` we can use `m_net == NET_IPV4`. ACKs for top commit: troygiorshev: reACK bcfebb6d5511ad4c156868bc799831ace628a225 via `git range-diff master 64897c5 bcfebb6` jonatack: re-ACK bcfebb6 per `git diff 662bb25 bcfebb6`, code review, debug build/tests clean, ran bitcoind. laanwj: Code review ACK bcfebb6d5511ad4c156868bc799831ace628a225 Tree-SHA512: 9347e2a50feac617a994bfb46a8f77e31c236bde882e4fd4f03eea4766cd5110216f5f3d24dee91d25218bab7f8bb6e1d2d6212a44db9e34594299fd6ff7606b Signed-off-by: pasta <pasta@dashboost.org> # Conflicts: # src/netaddress.cpp # src/netaddress.h
2020-07-29 13:31:10 +02:00
/// TOR (v2 or v3)
NET_ONION,
Merge #19534: net: save the network type explicitly in CNetAddr bcfebb6d5511ad4c156868bc799831ace628a225 net: save the network type explicitly in CNetAddr (Vasil Dimov) 100c64a95b518a6a19241aec4058b866a8872d9b net: document `enum Network` (Vasil Dimov) Pull request description: (chopped off from https://github.com/bitcoin/bitcoin/pull/19031 to ease review) Before this change, we would analyze the contents of `CNetAddr::ip[16]` in order to tell which type is an address. Change this by introducing a new member `CNetAddr::m_net` that explicitly tells the type of the address. This is necessary because in BIP155 we will not be able to tell the address type by just looking at its raw representation (e.g. both TORv3 and I2P are "seemingly random" 32 bytes). As a side effect of this change we no longer need to store IPv4 addresses encoded as IPv6 addresses - we can store them in proper 4 bytes (will be done in a separate commit). Also the code gets somewhat simplified - instead of `memcmp(ip, pchIPv4, sizeof(pchIPv4)) == 0` we can use `m_net == NET_IPV4`. ACKs for top commit: troygiorshev: reACK bcfebb6d5511ad4c156868bc799831ace628a225 via `git range-diff master 64897c5 bcfebb6` jonatack: re-ACK bcfebb6 per `git diff 662bb25 bcfebb6`, code review, debug build/tests clean, ran bitcoind. laanwj: Code review ACK bcfebb6d5511ad4c156868bc799831ace628a225 Tree-SHA512: 9347e2a50feac617a994bfb46a8f77e31c236bde882e4fd4f03eea4766cd5110216f5f3d24dee91d25218bab7f8bb6e1d2d6212a44db9e34594299fd6ff7606b Signed-off-by: pasta <pasta@dashboost.org> # Conflicts: # src/netaddress.cpp # src/netaddress.h
2020-07-29 13:31:10 +02:00
/// I2P
NET_I2P,
/// CJDNS
NET_CJDNS,
/// A set of addresses that represent the hash of a string or FQDN. We use
/// them in CAddrMan to keep track of which DNS seeds were used.
NET_INTERNAL,
Merge #19534: net: save the network type explicitly in CNetAddr bcfebb6d5511ad4c156868bc799831ace628a225 net: save the network type explicitly in CNetAddr (Vasil Dimov) 100c64a95b518a6a19241aec4058b866a8872d9b net: document `enum Network` (Vasil Dimov) Pull request description: (chopped off from https://github.com/bitcoin/bitcoin/pull/19031 to ease review) Before this change, we would analyze the contents of `CNetAddr::ip[16]` in order to tell which type is an address. Change this by introducing a new member `CNetAddr::m_net` that explicitly tells the type of the address. This is necessary because in BIP155 we will not be able to tell the address type by just looking at its raw representation (e.g. both TORv3 and I2P are "seemingly random" 32 bytes). As a side effect of this change we no longer need to store IPv4 addresses encoded as IPv6 addresses - we can store them in proper 4 bytes (will be done in a separate commit). Also the code gets somewhat simplified - instead of `memcmp(ip, pchIPv4, sizeof(pchIPv4)) == 0` we can use `m_net == NET_IPV4`. ACKs for top commit: troygiorshev: reACK bcfebb6d5511ad4c156868bc799831ace628a225 via `git range-diff master 64897c5 bcfebb6` jonatack: re-ACK bcfebb6 per `git diff 662bb25 bcfebb6`, code review, debug build/tests clean, ran bitcoind. laanwj: Code review ACK bcfebb6d5511ad4c156868bc799831ace628a225 Tree-SHA512: 9347e2a50feac617a994bfb46a8f77e31c236bde882e4fd4f03eea4766cd5110216f5f3d24dee91d25218bab7f8bb6e1d2d6212a44db9e34594299fd6ff7606b Signed-off-by: pasta <pasta@dashboost.org> # Conflicts: # src/netaddress.cpp # src/netaddress.h
2020-07-29 13:31:10 +02:00
/// Dummy value to indicate the number of NET_* constants.
NET_MAX,
};
/// Prefix of an IPv6 address when it contains an embedded IPv4 address.
/// Used when (un)serializing addresses in ADDRv1 format (pre-BIP155).
static const std::array<uint8_t, 12> IPV4_IN_IPV6_PREFIX{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF
};
/// Prefix of an IPv6 address when it contains an embedded TORv2 address.
/// Used when (un)serializing addresses in ADDRv1 format (pre-BIP155).
/// Such dummy IPv6 addresses are guaranteed to not be publicly routable as they
/// fall under RFC4193's fc00::/7 subnet allocated to unique-local addresses.
static const std::array<uint8_t, 6> TORV2_IN_IPV6_PREFIX{
0xFD, 0x87, 0xD8, 0x7E, 0xEB, 0x43
};
/// Prefix of an IPv6 address when it contains an embedded "internal" address.
/// Used when (un)serializing addresses in ADDRv1 format (pre-BIP155).
/// The prefix comes from 0xFD + SHA256("bitcoin")[0:5].
/// Such dummy IPv6 addresses are guaranteed to not be publicly routable as they
/// fall under RFC4193's fc00::/7 subnet allocated to unique-local addresses.
static const std::array<uint8_t, 6> INTERNAL_IN_IPV6_PREFIX{
0xFD, 0x6B, 0x88, 0xC0, 0x87, 0x24 // 0xFD + sha256("bitcoin")[0:5].
};
/// Size of IPv4 address (in bytes).
static constexpr size_t ADDR_IPV4_SIZE = 4;
/// Size of IPv6 address (in bytes).
static constexpr size_t ADDR_IPV6_SIZE = 16;
/// Size of TORv2 address (in bytes).
static constexpr size_t ADDR_TORV2_SIZE = 10;
/// Size of TORv3 address (in bytes). This is the length of just the address
/// as used in BIP155, without the checksum and the version byte.
static constexpr size_t ADDR_TORV3_SIZE = 32;
/// Size of I2P address (in bytes).
static constexpr size_t ADDR_I2P_SIZE = 32;
/// Size of CJDNS address (in bytes).
static constexpr size_t ADDR_CJDNS_SIZE = 16;
/// Size of "internal" (NET_INTERNAL) address (in bytes).
static constexpr size_t ADDR_INTERNAL_SIZE = 10;
Merge #19534: net: save the network type explicitly in CNetAddr bcfebb6d5511ad4c156868bc799831ace628a225 net: save the network type explicitly in CNetAddr (Vasil Dimov) 100c64a95b518a6a19241aec4058b866a8872d9b net: document `enum Network` (Vasil Dimov) Pull request description: (chopped off from https://github.com/bitcoin/bitcoin/pull/19031 to ease review) Before this change, we would analyze the contents of `CNetAddr::ip[16]` in order to tell which type is an address. Change this by introducing a new member `CNetAddr::m_net` that explicitly tells the type of the address. This is necessary because in BIP155 we will not be able to tell the address type by just looking at its raw representation (e.g. both TORv3 and I2P are "seemingly random" 32 bytes). As a side effect of this change we no longer need to store IPv4 addresses encoded as IPv6 addresses - we can store them in proper 4 bytes (will be done in a separate commit). Also the code gets somewhat simplified - instead of `memcmp(ip, pchIPv4, sizeof(pchIPv4)) == 0` we can use `m_net == NET_IPV4`. ACKs for top commit: troygiorshev: reACK bcfebb6d5511ad4c156868bc799831ace628a225 via `git range-diff master 64897c5 bcfebb6` jonatack: re-ACK bcfebb6 per `git diff 662bb25 bcfebb6`, code review, debug build/tests clean, ran bitcoind. laanwj: Code review ACK bcfebb6d5511ad4c156868bc799831ace628a225 Tree-SHA512: 9347e2a50feac617a994bfb46a8f77e31c236bde882e4fd4f03eea4766cd5110216f5f3d24dee91d25218bab7f8bb6e1d2d6212a44db9e34594299fd6ff7606b Signed-off-by: pasta <pasta@dashboost.org> # Conflicts: # src/netaddress.cpp # src/netaddress.h
2020-07-29 13:31:10 +02:00
/**
* Network address.
*/
class CNetAddr
{
protected:
/**
* Raw representation of the network address.
* In network byte order (big endian) for IPv4 and IPv6.
*/
prevector<ADDR_IPV6_SIZE, uint8_t> m_addr{ADDR_IPV6_SIZE, 0x0};
Merge #19534: net: save the network type explicitly in CNetAddr bcfebb6d5511ad4c156868bc799831ace628a225 net: save the network type explicitly in CNetAddr (Vasil Dimov) 100c64a95b518a6a19241aec4058b866a8872d9b net: document `enum Network` (Vasil Dimov) Pull request description: (chopped off from https://github.com/bitcoin/bitcoin/pull/19031 to ease review) Before this change, we would analyze the contents of `CNetAddr::ip[16]` in order to tell which type is an address. Change this by introducing a new member `CNetAddr::m_net` that explicitly tells the type of the address. This is necessary because in BIP155 we will not be able to tell the address type by just looking at its raw representation (e.g. both TORv3 and I2P are "seemingly random" 32 bytes). As a side effect of this change we no longer need to store IPv4 addresses encoded as IPv6 addresses - we can store them in proper 4 bytes (will be done in a separate commit). Also the code gets somewhat simplified - instead of `memcmp(ip, pchIPv4, sizeof(pchIPv4)) == 0` we can use `m_net == NET_IPV4`. ACKs for top commit: troygiorshev: reACK bcfebb6d5511ad4c156868bc799831ace628a225 via `git range-diff master 64897c5 bcfebb6` jonatack: re-ACK bcfebb6 per `git diff 662bb25 bcfebb6`, code review, debug build/tests clean, ran bitcoind. laanwj: Code review ACK bcfebb6d5511ad4c156868bc799831ace628a225 Tree-SHA512: 9347e2a50feac617a994bfb46a8f77e31c236bde882e4fd4f03eea4766cd5110216f5f3d24dee91d25218bab7f8bb6e1d2d6212a44db9e34594299fd6ff7606b Signed-off-by: pasta <pasta@dashboost.org> # Conflicts: # src/netaddress.cpp # src/netaddress.h
2020-07-29 13:31:10 +02:00
/**
* Network to which this address belongs.
*/
Network m_net{NET_IPV6};
uint32_t scopeId{0}; // for scoped/link-local ipv6 addresses
public:
CNetAddr();
explicit CNetAddr(const struct in_addr& ipv4Addr);
void SetIP(const CNetAddr& ip);
Merge #19534: net: save the network type explicitly in CNetAddr bcfebb6d5511ad4c156868bc799831ace628a225 net: save the network type explicitly in CNetAddr (Vasil Dimov) 100c64a95b518a6a19241aec4058b866a8872d9b net: document `enum Network` (Vasil Dimov) Pull request description: (chopped off from https://github.com/bitcoin/bitcoin/pull/19031 to ease review) Before this change, we would analyze the contents of `CNetAddr::ip[16]` in order to tell which type is an address. Change this by introducing a new member `CNetAddr::m_net` that explicitly tells the type of the address. This is necessary because in BIP155 we will not be able to tell the address type by just looking at its raw representation (e.g. both TORv3 and I2P are "seemingly random" 32 bytes). As a side effect of this change we no longer need to store IPv4 addresses encoded as IPv6 addresses - we can store them in proper 4 bytes (will be done in a separate commit). Also the code gets somewhat simplified - instead of `memcmp(ip, pchIPv4, sizeof(pchIPv4)) == 0` we can use `m_net == NET_IPV4`. ACKs for top commit: troygiorshev: reACK bcfebb6d5511ad4c156868bc799831ace628a225 via `git range-diff master 64897c5 bcfebb6` jonatack: re-ACK bcfebb6 per `git diff 662bb25 bcfebb6`, code review, debug build/tests clean, ran bitcoind. laanwj: Code review ACK bcfebb6d5511ad4c156868bc799831ace628a225 Tree-SHA512: 9347e2a50feac617a994bfb46a8f77e31c236bde882e4fd4f03eea4766cd5110216f5f3d24dee91d25218bab7f8bb6e1d2d6212a44db9e34594299fd6ff7606b Signed-off-by: pasta <pasta@dashboost.org> # Conflicts: # src/netaddress.cpp # src/netaddress.h
2020-07-29 13:31:10 +02:00
/**
* Set from a legacy IPv6 address.
* Legacy IPv6 address may be a normal IPv6 address, or another address
* (e.g. IPv4) disguised as IPv6. This encoding is used in the legacy
* `addr` encoding.
*/
void SetLegacyIPv6(Span<const uint8_t> ipv6);
Merge #19534: net: save the network type explicitly in CNetAddr bcfebb6d5511ad4c156868bc799831ace628a225 net: save the network type explicitly in CNetAddr (Vasil Dimov) 100c64a95b518a6a19241aec4058b866a8872d9b net: document `enum Network` (Vasil Dimov) Pull request description: (chopped off from https://github.com/bitcoin/bitcoin/pull/19031 to ease review) Before this change, we would analyze the contents of `CNetAddr::ip[16]` in order to tell which type is an address. Change this by introducing a new member `CNetAddr::m_net` that explicitly tells the type of the address. This is necessary because in BIP155 we will not be able to tell the address type by just looking at its raw representation (e.g. both TORv3 and I2P are "seemingly random" 32 bytes). As a side effect of this change we no longer need to store IPv4 addresses encoded as IPv6 addresses - we can store them in proper 4 bytes (will be done in a separate commit). Also the code gets somewhat simplified - instead of `memcmp(ip, pchIPv4, sizeof(pchIPv4)) == 0` we can use `m_net == NET_IPV4`. ACKs for top commit: troygiorshev: reACK bcfebb6d5511ad4c156868bc799831ace628a225 via `git range-diff master 64897c5 bcfebb6` jonatack: re-ACK bcfebb6 per `git diff 662bb25 bcfebb6`, code review, debug build/tests clean, ran bitcoind. laanwj: Code review ACK bcfebb6d5511ad4c156868bc799831ace628a225 Tree-SHA512: 9347e2a50feac617a994bfb46a8f77e31c236bde882e4fd4f03eea4766cd5110216f5f3d24dee91d25218bab7f8bb6e1d2d6212a44db9e34594299fd6ff7606b Signed-off-by: pasta <pasta@dashboost.org> # Conflicts: # src/netaddress.cpp # src/netaddress.h
2020-07-29 13:31:10 +02:00
private:
/**
* Set raw IPv4 or IPv6 address (in network byte order)
* @note Only NET_IPV4 and NET_IPV6 are allowed for network.
*/
void SetRaw(Network network, const uint8_t *data);
public:
/**
* Transform an arbitrary string into a non-routable ipv6 address.
* Useful for mapping resolved addresses back to their source.
*/
bool SetInternal(const std::string& name);
bool SetSpecial(const std::string &strName); // for Tor addresses
bool IsBindAny() const; // INADDR_ANY equivalent
bool IsIPv4() const; // IPv4 mapped address (::FFFF:0:0/96, 0.0.0.0/0)
bool IsIPv6() const; // IPv6 address (not mapped IPv4, not Tor)
bool IsRFC1918() const; // IPv4 private networks (10.0.0.0/8, 192.168.0.0/16, 172.16.0.0/12)
bool IsRFC2544() const; // IPv4 inter-network communications (198.18.0.0/15)
bool IsRFC6598() const; // IPv4 ISP-level NAT (100.64.0.0/10)
bool IsRFC5737() const; // IPv4 documentation addresses (192.0.2.0/24, 198.51.100.0/24, 203.0.113.0/24)
bool IsRFC3849() const; // IPv6 documentation address (2001:0DB8::/32)
bool IsRFC3927() const; // IPv4 autoconfig (169.254.0.0/16)
bool IsRFC3964() const; // IPv6 6to4 tunnelling (2002::/16)
bool IsRFC4193() const; // IPv6 unique local (FC00::/7)
bool IsRFC4380() const; // IPv6 Teredo tunnelling (2001::/32)
bool IsRFC4843() const; // IPv6 ORCHID (deprecated) (2001:10::/28)
bool IsRFC7343() const; // IPv6 ORCHIDv2 (2001:20::/28)
bool IsRFC4862() const; // IPv6 autoconfig (FE80::/64)
bool IsRFC6052() const; // IPv6 well-known prefix for IPv4-embedded address (64:FF9B::/96)
bool IsRFC6145() const; // IPv6 IPv4-translated address (::FFFF:0:0:0/96) (actually defined in RFC2765)
bool IsHeNet() const; // IPv6 Hurricane Electric - https://he.net (2001:0470::/36)
bool IsTor() const;
bool IsI2P() const;
bool IsCJDNS() const;
bool IsLocal() const;
bool IsRoutable() const;
bool IsInternal() const;
bool IsValid() const;
/**
* Check if the current object can be serialized in pre-ADDRv2/BIP155 format.
*/
bool IsAddrV1Compatible() const;
enum Network GetNetwork() const;
std::string ToString() const;
std::string ToStringIP(bool fUseGetnameinfo = true) const;
uint64_t GetHash() const;
bool GetInAddr(struct in_addr* pipv4Addr) const;
uint32_t GetNetClass() const;
2020-01-29 22:55:40 +01:00
//! For IPv4, mapped IPv4, SIIT translated IPv4, Teredo, 6to4 tunneled addresses, return the relevant IPv4 address as a uint32.
uint32_t GetLinkedIPv4() const;
//! Whether this address has a linked IPv4 address (see GetLinkedIPv4()).
bool HasLinkedIPv4() const;
// The AS on the BGP path to the node we use to diversify
// peers in AddrMan bucketing based on the AS infrastructure.
// The ip->AS mapping depends on how asmap is constructed.
uint32_t GetMappedAS(const std::vector<bool> &asmap) const;
std::vector<unsigned char> GetGroup(const std::vector<bool> &asmap) const;
std::vector<unsigned char> GetAddrBytes() const;
int GetReachabilityFrom(const CNetAddr *paddrPartner = nullptr) const;
explicit CNetAddr(const struct in6_addr& pipv6Addr, const uint32_t scope = 0);
bool GetIn6Addr(struct in6_addr* pipv6Addr) const;
friend bool operator==(const CNetAddr& a, const CNetAddr& b);
friend bool operator!=(const CNetAddr& a, const CNetAddr& b) { return !(a == b); }
friend bool operator<(const CNetAddr& a, const CNetAddr& b);
Merge #19534: net: save the network type explicitly in CNetAddr bcfebb6d5511ad4c156868bc799831ace628a225 net: save the network type explicitly in CNetAddr (Vasil Dimov) 100c64a95b518a6a19241aec4058b866a8872d9b net: document `enum Network` (Vasil Dimov) Pull request description: (chopped off from https://github.com/bitcoin/bitcoin/pull/19031 to ease review) Before this change, we would analyze the contents of `CNetAddr::ip[16]` in order to tell which type is an address. Change this by introducing a new member `CNetAddr::m_net` that explicitly tells the type of the address. This is necessary because in BIP155 we will not be able to tell the address type by just looking at its raw representation (e.g. both TORv3 and I2P are "seemingly random" 32 bytes). As a side effect of this change we no longer need to store IPv4 addresses encoded as IPv6 addresses - we can store them in proper 4 bytes (will be done in a separate commit). Also the code gets somewhat simplified - instead of `memcmp(ip, pchIPv4, sizeof(pchIPv4)) == 0` we can use `m_net == NET_IPV4`. ACKs for top commit: troygiorshev: reACK bcfebb6d5511ad4c156868bc799831ace628a225 via `git range-diff master 64897c5 bcfebb6` jonatack: re-ACK bcfebb6 per `git diff 662bb25 bcfebb6`, code review, debug build/tests clean, ran bitcoind. laanwj: Code review ACK bcfebb6d5511ad4c156868bc799831ace628a225 Tree-SHA512: 9347e2a50feac617a994bfb46a8f77e31c236bde882e4fd4f03eea4766cd5110216f5f3d24dee91d25218bab7f8bb6e1d2d6212a44db9e34594299fd6ff7606b Signed-off-by: pasta <pasta@dashboost.org> # Conflicts: # src/netaddress.cpp # src/netaddress.h
2020-07-29 13:31:10 +02:00
/**
* Serialize to a stream.
*/
template <typename Stream>
void Serialize(Stream& s) const
{
if (s.GetVersion() & ADDRV2_FORMAT) {
SerializeV2Stream(s);
} else {
SerializeV1Stream(s);
}
Merge #19534: net: save the network type explicitly in CNetAddr bcfebb6d5511ad4c156868bc799831ace628a225 net: save the network type explicitly in CNetAddr (Vasil Dimov) 100c64a95b518a6a19241aec4058b866a8872d9b net: document `enum Network` (Vasil Dimov) Pull request description: (chopped off from https://github.com/bitcoin/bitcoin/pull/19031 to ease review) Before this change, we would analyze the contents of `CNetAddr::ip[16]` in order to tell which type is an address. Change this by introducing a new member `CNetAddr::m_net` that explicitly tells the type of the address. This is necessary because in BIP155 we will not be able to tell the address type by just looking at its raw representation (e.g. both TORv3 and I2P are "seemingly random" 32 bytes). As a side effect of this change we no longer need to store IPv4 addresses encoded as IPv6 addresses - we can store them in proper 4 bytes (will be done in a separate commit). Also the code gets somewhat simplified - instead of `memcmp(ip, pchIPv4, sizeof(pchIPv4)) == 0` we can use `m_net == NET_IPV4`. ACKs for top commit: troygiorshev: reACK bcfebb6d5511ad4c156868bc799831ace628a225 via `git range-diff master 64897c5 bcfebb6` jonatack: re-ACK bcfebb6 per `git diff 662bb25 bcfebb6`, code review, debug build/tests clean, ran bitcoind. laanwj: Code review ACK bcfebb6d5511ad4c156868bc799831ace628a225 Tree-SHA512: 9347e2a50feac617a994bfb46a8f77e31c236bde882e4fd4f03eea4766cd5110216f5f3d24dee91d25218bab7f8bb6e1d2d6212a44db9e34594299fd6ff7606b Signed-off-by: pasta <pasta@dashboost.org> # Conflicts: # src/netaddress.cpp # src/netaddress.h
2020-07-29 13:31:10 +02:00
}
Merge #19534: net: save the network type explicitly in CNetAddr bcfebb6d5511ad4c156868bc799831ace628a225 net: save the network type explicitly in CNetAddr (Vasil Dimov) 100c64a95b518a6a19241aec4058b866a8872d9b net: document `enum Network` (Vasil Dimov) Pull request description: (chopped off from https://github.com/bitcoin/bitcoin/pull/19031 to ease review) Before this change, we would analyze the contents of `CNetAddr::ip[16]` in order to tell which type is an address. Change this by introducing a new member `CNetAddr::m_net` that explicitly tells the type of the address. This is necessary because in BIP155 we will not be able to tell the address type by just looking at its raw representation (e.g. both TORv3 and I2P are "seemingly random" 32 bytes). As a side effect of this change we no longer need to store IPv4 addresses encoded as IPv6 addresses - we can store them in proper 4 bytes (will be done in a separate commit). Also the code gets somewhat simplified - instead of `memcmp(ip, pchIPv4, sizeof(pchIPv4)) == 0` we can use `m_net == NET_IPV4`. ACKs for top commit: troygiorshev: reACK bcfebb6d5511ad4c156868bc799831ace628a225 via `git range-diff master 64897c5 bcfebb6` jonatack: re-ACK bcfebb6 per `git diff 662bb25 bcfebb6`, code review, debug build/tests clean, ran bitcoind. laanwj: Code review ACK bcfebb6d5511ad4c156868bc799831ace628a225 Tree-SHA512: 9347e2a50feac617a994bfb46a8f77e31c236bde882e4fd4f03eea4766cd5110216f5f3d24dee91d25218bab7f8bb6e1d2d6212a44db9e34594299fd6ff7606b Signed-off-by: pasta <pasta@dashboost.org> # Conflicts: # src/netaddress.cpp # src/netaddress.h
2020-07-29 13:31:10 +02:00
/**
* Unserialize from a stream.
*/
template <typename Stream>
void Unserialize(Stream& s)
{
if (s.GetVersion() & ADDRV2_FORMAT) {
UnserializeV2Stream(s);
} else {
UnserializeV1Stream(s);
}
}
friend class CSubNet;
private:
/**
* BIP155 network ids recognized by this software.
*/
enum BIP155Network : uint8_t {
IPV4 = 1,
IPV6 = 2,
TORV2 = 3,
TORV3 = 4,
I2P = 5,
CJDNS = 6,
};
/**
* Size of CNetAddr when serialized as ADDRv1 (pre-BIP155) (in bytes).
*/
static constexpr size_t V1_SERIALIZATION_SIZE = ADDR_IPV6_SIZE;
/**
* Maximum size of an address as defined in BIP155 (in bytes).
* This is only the size of the address, not the entire CNetAddr object
* when serialized.
*/
static constexpr size_t MAX_ADDRV2_SIZE = 512;
/**
* Get the BIP155 network id of this address.
* Must not be called for IsInternal() objects.
* @returns BIP155 network id
*/
BIP155Network GetBIP155Network() const;
/**
* Set `m_net` from the provided BIP155 network id and size after validation.
* @retval true the network was recognized, is valid and `m_net` was set
* @retval false not recognised (from future?) and should be silently ignored
* @throws std::ios_base::failure if the network is one of the BIP155 founding
* networks (id 1..6) with wrong address size.
*/
bool SetNetFromBIP155Network(uint8_t possible_bip155_net, size_t address_size);
/**
* Serialize in pre-ADDRv2/BIP155 format to an array.
*/
void SerializeV1Array(uint8_t (&arr)[V1_SERIALIZATION_SIZE]) const
{
size_t prefix_size;
switch (m_net) {
case NET_IPV6:
assert(m_addr.size() == sizeof(arr));
memcpy(arr, m_addr.data(), m_addr.size());
return;
case NET_IPV4:
prefix_size = sizeof(IPV4_IN_IPV6_PREFIX);
assert(prefix_size + m_addr.size() == sizeof(arr));
memcpy(arr, IPV4_IN_IPV6_PREFIX.data(), prefix_size);
memcpy(arr + prefix_size, m_addr.data(), m_addr.size());
return;
case NET_ONION:
if (m_addr.size() == ADDR_TORV3_SIZE) {
break;
}
prefix_size = sizeof(TORV2_IN_IPV6_PREFIX);
assert(prefix_size + m_addr.size() == sizeof(arr));
memcpy(arr, TORV2_IN_IPV6_PREFIX.data(), prefix_size);
memcpy(arr + prefix_size, m_addr.data(), m_addr.size());
return;
case NET_INTERNAL:
prefix_size = sizeof(INTERNAL_IN_IPV6_PREFIX);
assert(prefix_size + m_addr.size() == sizeof(arr));
memcpy(arr, INTERNAL_IN_IPV6_PREFIX.data(), prefix_size);
memcpy(arr + prefix_size, m_addr.data(), m_addr.size());
return;
case NET_I2P:
break;
case NET_CJDNS:
break;
case NET_UNROUTABLE:
case NET_MAX:
assert(false);
} // no default case, so the compiler can warn about missing cases
// Serialize TORv3, I2P and CJDNS as all-zeros.
memset(arr, 0x0, V1_SERIALIZATION_SIZE);
}
public:
/**
* Serialize in pre-ADDRv2/BIP155 format to a stream.
*/
template <typename Stream>
void SerializeV1Stream(Stream& s) const
{
uint8_t serialized[V1_SERIALIZATION_SIZE];
SerializeV1Array(serialized);
s << serialized;
}
/**
* Serialize as ADDRv2 / BIP155.
*/
template <typename Stream>
void SerializeV2Stream(Stream& s) const
{
if (IsInternal()) {
// Serialize NET_INTERNAL as embedded in IPv6. We need to
// serialize such addresses from addrman.
s << static_cast<uint8_t>(BIP155Network::IPV6);
s << COMPACTSIZE(ADDR_IPV6_SIZE);
SerializeV1Stream(s);
return;
}
s << static_cast<uint8_t>(GetBIP155Network());
s << m_addr;
}
/**
* Unserialize from a pre-ADDRv2/BIP155 format from an array.
*/
void UnserializeV1Array(uint8_t (&arr)[V1_SERIALIZATION_SIZE])
{
Merge #19534: net: save the network type explicitly in CNetAddr bcfebb6d5511ad4c156868bc799831ace628a225 net: save the network type explicitly in CNetAddr (Vasil Dimov) 100c64a95b518a6a19241aec4058b866a8872d9b net: document `enum Network` (Vasil Dimov) Pull request description: (chopped off from https://github.com/bitcoin/bitcoin/pull/19031 to ease review) Before this change, we would analyze the contents of `CNetAddr::ip[16]` in order to tell which type is an address. Change this by introducing a new member `CNetAddr::m_net` that explicitly tells the type of the address. This is necessary because in BIP155 we will not be able to tell the address type by just looking at its raw representation (e.g. both TORv3 and I2P are "seemingly random" 32 bytes). As a side effect of this change we no longer need to store IPv4 addresses encoded as IPv6 addresses - we can store them in proper 4 bytes (will be done in a separate commit). Also the code gets somewhat simplified - instead of `memcmp(ip, pchIPv4, sizeof(pchIPv4)) == 0` we can use `m_net == NET_IPV4`. ACKs for top commit: troygiorshev: reACK bcfebb6d5511ad4c156868bc799831ace628a225 via `git range-diff master 64897c5 bcfebb6` jonatack: re-ACK bcfebb6 per `git diff 662bb25 bcfebb6`, code review, debug build/tests clean, ran bitcoind. laanwj: Code review ACK bcfebb6d5511ad4c156868bc799831ace628a225 Tree-SHA512: 9347e2a50feac617a994bfb46a8f77e31c236bde882e4fd4f03eea4766cd5110216f5f3d24dee91d25218bab7f8bb6e1d2d6212a44db9e34594299fd6ff7606b Signed-off-by: pasta <pasta@dashboost.org> # Conflicts: # src/netaddress.cpp # src/netaddress.h
2020-07-29 13:31:10 +02:00
// Use SetLegacyIPv6() so that m_net is set correctly. For example
// ::FFFF:0102:0304 should be set as m_net=NET_IPV4 (1.2.3.4).
SetLegacyIPv6(arr);
}
/**
* Unserialize from a pre-ADDRv2/BIP155 format from a stream.
*/
template <typename Stream>
void UnserializeV1Stream(Stream& s)
{
uint8_t serialized[V1_SERIALIZATION_SIZE];
s >> serialized;
UnserializeV1Array(serialized);
}
/**
* Unserialize from a ADDRv2 / BIP155 format.
*/
template <typename Stream>
void UnserializeV2Stream(Stream& s)
{
uint8_t bip155_net;
s >> bip155_net;
size_t address_size;
s >> COMPACTSIZE(address_size);
if (address_size > MAX_ADDRV2_SIZE) {
throw std::ios_base::failure(strprintf(
"Address too long: %u > %u", address_size, MAX_ADDRV2_SIZE));
}
scopeId = 0;
if (SetNetFromBIP155Network(bip155_net, address_size)) {
m_addr.resize(address_size);
s >> MakeSpan(m_addr);
if (m_net != NET_IPV6) {
return;
}
// Do some special checks on IPv6 addresses.
// Recognize NET_INTERNAL embedded in IPv6, such addresses are not
// gossiped but could be coming from addrman, when unserializing from
// disk.
if (HasPrefix(m_addr, INTERNAL_IN_IPV6_PREFIX)) {
m_net = NET_INTERNAL;
memmove(m_addr.data(), m_addr.data() + INTERNAL_IN_IPV6_PREFIX.size(),
ADDR_INTERNAL_SIZE);
m_addr.resize(ADDR_INTERNAL_SIZE);
return;
}
if (!HasPrefix(m_addr, IPV4_IN_IPV6_PREFIX) &&
!HasPrefix(m_addr, TORV2_IN_IPV6_PREFIX)) {
return;
}
// IPv4 and TORv2 are not supposed to be embedded in IPv6 (like in V1
// encoding). Unserialize as !IsValid(), thus ignoring them.
} else {
// If we receive an unknown BIP155 network id (from the future?) then
// ignore the address - unserialize as !IsValid().
s.ignore(address_size);
}
// Mimic a default-constructed CNetAddr object which is !IsValid() and thus
// will not be gossiped, but continue reading next addresses from the stream.
m_net = NET_IPV6;
m_addr.assign(ADDR_IPV6_SIZE, 0x0);
}
};
class CSubNet
{
protected:
/// Network (base) address
CNetAddr network;
/// Netmask, in network byte order
uint8_t netmask[16];
/// Is this value valid? (only used to signal parse errors)
bool valid;
public:
CSubNet();
CSubNet(const CNetAddr& addr, uint8_t mask);
CSubNet(const CNetAddr& addr, const CNetAddr& mask);
//constructor for single ip subnet (<ipv4>/32 or <ipv6>/128)
explicit CSubNet(const CNetAddr& addr);
bool Match(const CNetAddr &addr) const;
std::string ToString() const;
bool IsValid() const;
friend bool operator==(const CSubNet& a, const CSubNet& b);
friend bool operator!=(const CSubNet& a, const CSubNet& b) { return !(a == b); }
friend bool operator<(const CSubNet& a, const CSubNet& b);
partial merge #18317: Serialization improvements step 6 (all except wallet/gui) f9ee0f37c28f604bc82dab502ce229c66ef5b3b9 Add comments to CustomUintFormatter (Pieter Wuille) 4eb5643e3538863c9d2ff261f49a9a1b248de243 Convert everything except wallet/qt to new serialization (Pieter Wuille) 2b1f85e8c52c8bc5a17eae4c809eaf61d724af98 Convert blockencodings_tests to new serialization (Pieter Wuille) 73747afbbeb013669faf4c4d2c0903cec4526fb0 Convert merkleblock to new serialization (Pieter Wuille) d06fedd1bc26bf5bf2b203d4445aeaebccca780e Add SER_READ and SER_WRITE for read/write-dependent statements (Russell Yanofsky) 6f9a1e5ad0a270d3b5a715f3e3ea0911193bf244 Extend CustomUintFormatter to support enums (Russell Yanofsky) 769ee5fa0011ae658770586442715452a656559d Merge BigEndian functionality into CustomUintFormatter (Pieter Wuille) Pull request description: The next step of changes from #10785. This: * Adds support for enum serialization to `CustomUintFormatter`, used in `CAddress` for service flags. * Merges `BigEndian` into `CustomUintFormatter`, used in `CNetAddr` for port numbers. * Converts everything (except wallet and gui) to use the new serialization framework. ACKs for top commit: MarcoFalke: re-ACK f9ee0f37c2, only change is new documentation commit for CustomUintFormatter 📂 ryanofsky: Code review ACK f9ee0f37c28f604bc82dab502ce229c66ef5b3b9. Just new commit adding comment since last review jonatack: Code review re-ACK f9ee0f37c28f604bc82dab502ce229c6 only change since last review is an additional commit adding Doxygen documentation for `CustomUintFormatter`. Tree-SHA512: e7a0a36afae592d5a4ff8c81ae04d858ac409388e361f2bc197d9a78abca45134218497ab2dfd6d031e0cce0ca586cf857077b7c6ce17fccf67e2d367c1b6cd4
2020-05-20 13:30:21 +02:00
SERIALIZE_METHODS(CSubNet, obj) { READWRITE(obj.network, obj.netmask, obj.valid); }
};
/** A combination of a network address (CNetAddr) and a (TCP) port */
class CService : public CNetAddr
{
protected:
uint16_t port; // host order
public:
CService();
CService(const CNetAddr& ip, unsigned short port);
CService(const struct in_addr& ipv4Addr, unsigned short port);
explicit CService(const struct sockaddr_in& addr);
void SetPort(unsigned short portIn);
unsigned short GetPort() const;
bool GetSockAddr(struct sockaddr* paddr, socklen_t *addrlen) const;
bool SetSockAddr(const struct sockaddr* paddr);
friend bool operator==(const CService& a, const CService& b);
friend bool operator!=(const CService& a, const CService& b) { return !(a == b); }
friend bool operator<(const CService& a, const CService& b);
std::vector<unsigned char> GetKey() const;
std::string ToString(bool fUseGetnameinfo = true) const;
std::string ToStringPort() const;
std::string ToStringIPPort(bool fUseGetnameinfo = true) const;
CService(const struct in6_addr& ipv6Addr, unsigned short port);
explicit CService(const struct sockaddr_in6& addr);
SERIALIZE_METHODS(CService, obj)
{
READWRITEAS(CNetAddr, obj);
READWRITE(Using<BigEndianFormatter<2>>(obj.port));
}
};
#endif // BITCOIN_NETADDRESS_H