Sync release-notes.md with Bitcoin 0.14

Also remove references to unused communication channels (Freenode, mailing lists)
This commit is contained in:
Alexander Block 2018-01-19 10:50:14 +01:00
parent c5fdd27d40
commit 1c8b7b4663

View File

@ -5,11 +5,25 @@ Release Process
* Update manpages, see [gen-manpages.sh](https://github.com/dashpay/dash/blob/master/contrib/devtools/README.md#gen-manpagessh). * Update manpages, see [gen-manpages.sh](https://github.com/dashpay/dash/blob/master/contrib/devtools/README.md#gen-manpagessh).
* Update hardcoded [seeds](/contrib/seeds) Before every minor and major release:
* * * * Update [bips.md](bips.md) to account for changes since the last release.
* Update version in sources (see below)
* Write release notes (see below)
* Update `src/chainparams.cpp` nMinimumChainWork with information from the getblockchaininfo rpc.
* Update `src/chainparams.cpp` defaultAssumeValid with information from the getblockhash rpc.
- The selected value must not be orphaned so it may be useful to set the value two blocks back from the tip.
- Testnet should be set some tens of thousands back from the tip due to reorgs there.
- This update should be reviewed with a reindex-chainstate with assumevalid=0 to catch any defect
that causes rejection of blocks in the past history.
Before every major release:
* Update hardcoded [seeds](/contrib/seeds/README.md). TODO: Give example PR for Dash
* Update [`BLOCK_CHAIN_SIZE`](/src/qt/intro.cpp) to the current size plus some overhead.
### First time / New builders ### First time / New builders
If you're using the automated script (found in [contrib/gitian-build.sh](/contrib/gitian-build.sh)), then at this point you should run it with the "--setup" command. Otherwise ignore this. If you're using the automated script (found in [contrib/gitian-build.sh](/contrib/gitian-build.sh)), then at this point you should run it with the "--setup" command. Otherwise ignore this.
Check out the source code in the following directory hierarchy. Check out the source code in the following directory hierarchy.
@ -22,162 +36,202 @@ Check out the source code in the following directory hierarchy.
### Dash Core maintainers/release engineers, update (commit) version in sources ### Dash Core maintainers/release engineers, update (commit) version in sources
pushd ./dash - `configure.ac`:
contrib/verifysfbinaries/verify.sh - `_CLIENT_VERSION_MAJOR`
configure.ac - `_CLIENT_VERSION_MINOR`
doc/README* - `_CLIENT_VERSION_REVISION`
doc/Doxyfile - Don't forget to set `_CLIENT_VERSION_IS_RELEASE` to `true`
contrib/gitian-descriptors/*.yml - `src/clientversion.h`: (this mirrors `configure.ac` - see issue #3539)
src/clientversion.h (change CLIENT_VERSION_IS_RELEASE to true) - `CLIENT_VERSION_MAJOR`
- `CLIENT_VERSION_MINOR`
- `CLIENT_VERSION_REVISION`
- Don't forget to set `CLIENT_VERSION_IS_RELEASE` to `true`
- `doc/README.md` and `doc/README_windows.txt`
- `doc/Doxyfile`: `PROJECT_NUMBER` contains the full version
- `contrib/gitian-descriptors/*.yml`: usually one'd want to do this on master after branching off the release - but be sure to at least do it before a new major release
# tag version in git Write release notes. git shortlog helps a lot, for example:
git tag -s v(new version, e.g. 0.8.0) git shortlog --no-merges v(current version, e.g. 0.12.2)..v(new version, e.g. 0.12.3)
# write release notes. git shortlog helps a lot, for example: Generate list of authors:
git shortlog --no-merges v(current version, e.g. 0.7.2)..v(new version, e.g. 0.8.0) git log --format='%aN' "$*" | sort -ui | sed -e 's/^/- /'
popd
* * * Tag version (or release candidate) in git
git tag -s v(new version, e.g. 0.12.3)
### Setup and perform Gitian builds ### Setup and perform Gitian builds
If you're using the automated script (found in [contrib/gitian-build.sh](/contrib/gitian-build.sh)), then at this point you should run it with the "--build" command. Otherwise ignore this. If you're using the automated script (found in [contrib/gitian-build.sh](/contrib/gitian-build.sh)), then at this point you should run it with the "--build" command. Otherwise ignore this.
Setup Gitian descriptors: Setup Gitian descriptors:
pushd ./dash pushd ./dash
export SIGNER=(your Gitian key, ie bluematt, sipa, etc) export SIGNER=(your Gitian key, ie bluematt, sipa, etc)
export VERSION=(new version, e.g. 0.8.0) export VERSION=(new version, e.g. 0.12.3)
git fetch git fetch
git checkout v${VERSION} git checkout v${VERSION}
popd popd
Ensure your gitian.sigs are up-to-date if you wish to gverify your builds against other Gitian signatures. Ensure your gitian.sigs are up-to-date if you wish to gverify your builds against other Gitian signatures.
pushd ./gitian.sigs pushd ./gitian.sigs
git pull git pull
popd popd
Ensure gitian-builder is up-to-date: Ensure gitian-builder is up-to-date:
pushd ./gitian-builder
git pull
popd
pushd ./gitian-builder
git pull
### Fetch and create inputs: (first time, or when dependency versions change) ### Fetch and create inputs: (first time, or when dependency versions change)
mkdir -p inputs pushd ./gitian-builder
wget -P inputs https://bitcoincore.org/cfields/osslsigncode-Backports-to-1.7.1.patch mkdir -p inputs
wget -P inputs http://downloads.sourceforge.net/project/osslsigncode/osslsigncode/osslsigncode-1.7.1.tar.gz wget -P inputs https://bitcoincore.org/cfields/osslsigncode-Backports-to-1.7.1.patch
wget -P inputs http://downloads.sourceforge.net/project/osslsigncode/osslsigncode/osslsigncode-1.7.1.tar.gz
popd
Create the OS X SDK tarball, see the [OS X readme](README_osx.md) for details, and copy it into the inputs directory. Create the OS X SDK tarball, see the [OS X readme](README_osx.md) for details, and copy it into the inputs directory.
### Optional: Seed the Gitian sources cache and offline git repositories ### Optional: Seed the Gitian sources cache and offline git repositories
By default, Gitian will fetch source files as needed. To cache them ahead of time: By default, Gitian will fetch source files as needed. To cache them ahead of time:
make -C ../dash/depends download SOURCES_PATH=`pwd`/cache/common pushd ./gitian-builder
make -C ../dash/depends download SOURCES_PATH=`pwd`/cache/common
popd
Only missing files will be fetched, so this is safe to re-run for each build. Only missing files will be fetched, so this is safe to re-run for each build.
NOTE: Offline builds must use the --url flag to ensure Gitian fetches only from local URLs. For example: NOTE: Offline builds must use the --url flag to ensure Gitian fetches only from local URLs. For example:
```
./bin/gbuild --url dash=/path/to/dash,signature=/path/to/sigs {rest of arguments} pushd ./gitian-builder
``` ./bin/gbuild --url dash=/path/to/dash,signature=/path/to/sigs {rest of arguments}
popd
The gbuild invocations below <b>DO NOT DO THIS</b> by default. The gbuild invocations below <b>DO NOT DO THIS</b> by default.
### Build and sign Dash Core for Linux, Windows, and OS X: ### Build and sign Dash Core for Linux, Windows, and OS X:
./bin/gbuild --memory 3000 --commit dash=v${VERSION} ../dash/contrib/gitian-descriptors/gitian-linux.yml pushd ./gitian-builder
./bin/gsign --signer $SIGNER --release ${VERSION}-linux --destination ../gitian.sigs/ ../dash/contrib/gitian-descriptors/gitian-linux.yml ./bin/gbuild --memory 3000 --commit dash=v${VERSION} ../dash/contrib/gitian-descriptors/gitian-linux.yml
mv build/out/dash-*.tar.gz build/out/src/dash-*.tar.gz ../ ./bin/gsign --signer $SIGNER --release ${VERSION}-linux --destination ../gitian.sigs/ ../dash/contrib/gitian-descriptors/gitian-linux.yml
mv build/out/dash-*.tar.gz build/out/src/dash-*.tar.gz ../
./bin/gbuild --memory 3000 --commit dash=v${VERSION} ../dash/contrib/gitian-descriptors/gitian-win.yml ./bin/gbuild --memory 3000 --commit dash=v${VERSION} ../dash/contrib/gitian-descriptors/gitian-win.yml
./bin/gsign --signer $SIGNER --release ${VERSION}-win-unsigned --destination ../gitian.sigs/ ../dash/contrib/gitian-descriptors/gitian-win.yml ./bin/gsign --signer $SIGNER --release ${VERSION}-win-unsigned --destination ../gitian.sigs/ ../dash/contrib/gitian-descriptors/gitian-win.yml
mv build/out/dash-*-win-unsigned.tar.gz inputs/dash-win-unsigned.tar.gz mv build/out/dash-*-win-unsigned.tar.gz inputs/dash-win-unsigned.tar.gz
mv build/out/dash-*.zip build/out/dash-*.exe ../ mv build/out/dash-*.zip build/out/dash-*.exe ../
./bin/gbuild --memory 3000 --commit dash=v${VERSION} ../dash/contrib/gitian-descriptors/gitian-osx.yml ./bin/gbuild --memory 3000 --commit dash=v${VERSION} ../dash/contrib/gitian-descriptors/gitian-osx.yml
./bin/gsign --signer $SIGNER --release ${VERSION}-osx-unsigned --destination ../gitian.sigs/ ../dash/contrib/gitian-descriptors/gitian-osx.yml ./bin/gsign --signer $SIGNER --release ${VERSION}-osx-unsigned --destination ../gitian.sigs/ ../dash/contrib/gitian-descriptors/gitian-osx.yml
mv build/out/dash-*-osx-unsigned.tar.gz inputs/dash-osx-unsigned.tar.gz mv build/out/dash-*-osx-unsigned.tar.gz inputs/dash-osx-unsigned.tar.gz
mv build/out/dash-*.tar.gz build/out/dash-*.dmg ../ mv build/out/dash-*.tar.gz build/out/dash-*.dmg ../
popd popd
Build output expected: Build output expected:
1. source tarball (dash-${VERSION}.tar.gz) 1. source tarball (`dash-${VERSION}.tar.gz`)
2. linux 32-bit and 64-bit dist tarballs (dash-${VERSION}-linux[32|64].tar.gz) 2. linux 32-bit and 64-bit dist tarballs (`dash-${VERSION}-linux[32|64].tar.gz`)
3. windows 32-bit and 64-bit unsigned installers and dist zips (dash-${VERSION}-win[32|64]-setup-unsigned.exe, dash-${VERSION}-win[32|64].zip) 3. windows 32-bit and 64-bit unsigned installers and dist zips (`dash-${VERSION}-win[32|64]-setup-unsigned.exe`, `dash-${VERSION}-win[32|64].zip`)
4. OS X unsigned installer and dist tarball (dash-${VERSION}-osx-unsigned.dmg, dash-${VERSION}-osx64.tar.gz) 4. OS X unsigned installer and dist tarball (`dash-${VERSION}-osx-unsigned.dmg`, `dash-${VERSION}-osx64.tar.gz`)
5. Gitian signatures (in gitian.sigs/${VERSION}-<linux|{win,osx}-unsigned>/(your Gitian key)/ 5. Gitian signatures (in `gitian.sigs/${VERSION}-<linux|{win,osx}-unsigned>/(your Gitian key)/`)
### Verify other gitian builders signatures to your own. (Optional) ### Verify other gitian builders signatures to your own. (Optional)
Add other gitian builders keys to your gpg keyring, and/or refresh keys. Add other gitian builders keys to your gpg keyring, and/or refresh keys.
gpg --import ../dash/contrib/gitian-keys/*.pgp gpg --import dash/contrib/gitian-keys/*.pgp
gpg --refresh-keys gpg --refresh-keys
Verify the signatures Verify the signatures
./bin/gverify -v -d ../gitian.sigs/ -r ${VERSION}-linux ../dash/contrib/gitian-descriptors/gitian-linux.yml pushd ./gitian-builder
./bin/gverify -v -d ../gitian.sigs/ -r ${VERSION}-win-unsigned ../dash/contrib/gitian-descriptors/gitian-win.yml ./bin/gverify -v -d ../gitian.sigs/ -r ${VERSION}-linux ../dash/contrib/gitian-descriptors/gitian-linux.yml
./bin/gverify -v -d ../gitian.sigs/ -r ${VERSION}-osx-unsigned ../dash/contrib/gitian-descriptors/gitian-osx.yml ./bin/gverify -v -d ../gitian.sigs/ -r ${VERSION}-win-unsigned ../dash/contrib/gitian-descriptors/gitian-win.yml
./bin/gverify -v -d ../gitian.sigs/ -r ${VERSION}-osx-unsigned ../dash/contrib/gitian-descriptors/gitian-osx.yml
popd popd
### Next steps: ### Next steps:
Commit your signature to gitian.sigs: Commit your signature to gitian.sigs:
pushd gitian.sigs pushd gitian.sigs
git add ${VERSION}-linux/${SIGNER} git add ${VERSION}-linux/${SIGNER}
git add ${VERSION}-win-unsigned/${SIGNER} git add ${VERSION}-win-unsigned/${SIGNER}
git add ${VERSION}-osx-unsigned/${SIGNER} git add ${VERSION}-osx-unsigned/${SIGNER}
git commit -a git commit -a
git push # Assuming you can push to the gitian.sigs tree git push # Assuming you can push to the gitian.sigs tree
popd popd
Wait for Windows/OS X detached signatures: Wait for Windows/OS X detached signatures:
Once the Windows/OS X builds each have 3 matching signatures, they will be signed with their respective release keys.
Detached signatures will then be committed to the [dash-detached-sigs](https://github.com/dashpay/dash-detached-sigs) repository, which can be combined with the unsigned apps to create signed binaries.
Create (and optionally verify) the signed OS X binary: - Once the Windows/OS X builds each have 3 matching signatures, they will be signed with their respective release keys.
- Detached signatures will then be committed to the [dash-detached-sigs](https://github.com/dashpay/dash-detached-sigs) repository, which can be combined with the unsigned apps to create signed binaries.
pushd ./gitian-builder Create (and optionally verify) the signed OS X binary:
./bin/gbuild -i --commit signature=v${VERSION} ../dash/contrib/gitian-descriptors/gitian-osx-signer.yml
./bin/gsign --signer $SIGNER --release ${VERSION}-osx-signed --destination ../gitian.sigs/ ../dash/contrib/gitian-descriptors/gitian-osx-signer.yml
./bin/gverify -v -d ../gitian.sigs/ -r ${VERSION}-osx-signed ../dash/contrib/gitian-descriptors/gitian-osx-signer.yml
mv build/out/dash-osx-signed.dmg ../dash-${VERSION}-osx.dmg
popd
Create (and optionally verify) the signed Windows binaries: pushd ./gitian-builder
./bin/gbuild -i --commit signature=v${VERSION} ../dash/contrib/gitian-descriptors/gitian-osx-signer.yml
./bin/gsign --signer $SIGNER --release ${VERSION}-osx-signed --destination ../gitian.sigs/ ../dash/contrib/gitian-descriptors/gitian-osx-signer.yml
./bin/gverify -v -d ../gitian.sigs/ -r ${VERSION}-osx-signed ../dash/contrib/gitian-descriptors/gitian-osx-signer.yml
mv build/out/dash-osx-signed.dmg ../dash-${VERSION}-osx.dmg
popd
pushd ./gitian-builder Create (and optionally verify) the signed Windows binaries:
./bin/gbuild -i --commit signature=v${VERSION} ../dash/contrib/gitian-descriptors/gitian-win-signer.yml
./bin/gsign --signer $SIGNER --release ${VERSION}-win-signed --destination ../gitian.sigs/ ../dash/contrib/gitian-descriptors/gitian-win-signer.yml pushd ./gitian-builder
./bin/gverify -v -d ../gitian.sigs/ -r ${VERSION}-win-signed ../dash/contrib/gitian-descriptors/gitian-win-signer.yml ./bin/gbuild -i --commit signature=v${VERSION} ../dash/contrib/gitian-descriptors/gitian-win-signer.yml
mv build/out/dash-*win64-setup.exe ../dash-${VERSION}-win64-setup.exe ./bin/gsign --signer $SIGNER --release ${VERSION}-win-signed --destination ../gitian.sigs/ ../dash/contrib/gitian-descriptors/gitian-win-signer.yml
mv build/out/dash-*win32-setup.exe ../dash-${VERSION}-win32-setup.exe ./bin/gverify -v -d ../gitian.sigs/ -r ${VERSION}-win-signed ../dash/contrib/gitian-descriptors/gitian-win-signer.yml
popd mv build/out/dash-*win64-setup.exe ../dash-${VERSION}-win64-setup.exe
mv build/out/dash-*win32-setup.exe ../dash-${VERSION}-win32-setup.exe
popd
Commit your signature for the signed OS X/Windows binaries: Commit your signature for the signed OS X/Windows binaries:
pushd gitian.sigs pushd gitian.sigs
git add ${VERSION}-osx-signed/${SIGNER} git add ${VERSION}-osx-signed/${SIGNER}
git add ${VERSION}-win-signed/${SIGNER} git add ${VERSION}-win-signed/${SIGNER}
git commit -a git commit -a
git push # Assuming you can push to the gitian.sigs tree git push # Assuming you can push to the gitian.sigs tree
popd popd
-------------------------------------------------------------------------
### After 3 or more people have gitian-built and their results match: ### After 3 or more people have gitian-built and their results match:
- Create `SHA256SUMS.asc` for the builds, and GPG-sign it: - Create `SHA256SUMS.asc` for the builds, and GPG-sign it:
```bash ```bash
sha256sum * > SHA256SUMS sha256sum * > SHA256SUMS
```
The list of files should be:
```
dash-${VERSION}-aarch64-linux-gnu.tar.gz
dash-${VERSION}-arm-linux-gnueabihf.tar.gz
dash-${VERSION}-i686-pc-linux-gnu.tar.gz
dash-${VERSION}-x86_64-linux-gnu.tar.gz
dash-${VERSION}-osx64.tar.gz
dash-${VERSION}-osx.dmg
dash-${VERSION}.tar.gz
dash-${VERSION}-win32-setup.exe
dash-${VERSION}-win32.zip
dash-${VERSION}-win64-setup.exe
dash-${VERSION}-win64.zip
```
The `*-debug*` files generated by the gitian build contain debug symbols
for troubleshooting by developers. It is assumed that anyone that is interested
in debugging can run gitian to generate the files for themselves. To avoid
end-user confusion about which file to pick, as well as save storage
space *do not upload these to the dash.org server*.
- GPG-sign it, delete the unsigned file:
```
gpg --digest-algo sha256 --clearsign SHA256SUMS # outputs SHA256SUMS.asc gpg --digest-algo sha256 --clearsign SHA256SUMS # outputs SHA256SUMS.asc
rm SHA256SUMS rm SHA256SUMS
``` ```
@ -192,11 +246,7 @@ Note: check that SHA256SUMS itself doesn't end up in SHA256SUMS, which is a spur
- Release on Dash forum: https://www.dash.org/forum/topic/official-announcements.54/ - Release on Dash forum: https://www.dash.org/forum/topic/official-announcements.54/
- Dash-development mailing list - Optionally Discord, twitter, reddit /r/Dashpay, ... but this will usually sort out itself
- Update title of #dashpay on Freenode IRC
- Optionally reddit /r/Dashpay, ... but this will usually sort out itself
- Notify flare so that he can start building [the PPAs](https://launchpad.net/~dash.org/+archive/ubuntu/dash) - Notify flare so that he can start building [the PPAs](https://launchpad.net/~dash.org/+archive/ubuntu/dash)