Merge branch 'v-1.11.0.x' of https://github.com/darkcoin/darkcoin into v0.11.0.x

This commit is contained in:
Evan Duffield 2015-01-01 13:47:23 -07:00
commit 4e5cf9919c
3 changed files with 277 additions and 412 deletions

View File

@ -0,0 +1,276 @@
0.11.0 Release notes
====================
Darkcoin Core 0.11.0 is forked off the Bitcoin Core 0.9.3. The old darkcoin
versions 0.10.x were forked from the Litecoin 0.8 tree. The following changes
are introduced in this major release. This list is compiled from the release
notes of Bitcoin Core 0.9.0, 0.9.1, 0.9.2, 0.9.2.1, 0.9.3 and was completed
with the introduced changes to the Darkcoin Core 0.11.0.
Darkcoin Core:
- Rebrand to `Darkcoin Core`
- Version bumped to 0.11 to indicate a new major release
- Renamed client to identify with network from `Satoshi` to `Core`
- Bump protocol version to 70052
- Changed p2sh-address versions to start with `7` (instead of `3`, this affects
public keys only, old scripts remain valid and usable!)
- Changed testnet address versions to start with `x` or `y` (instead of `m` or
`n`, this affects public keys only, old wallets remain valid and usable!)
- Defined BIP32 (HD) address versions to start with `drkp`/`drkv` (`DRKP`/`DRKV`
for testnet)
- Added new units: `duffs` (1 / 100.000.000 DRK)
- Added units for testnet: tDRK, mtDRK, utDRK, tduffs
- Added new DNS seed from masternode.io
- Fixed wallet locking after sending coins
- Consider generated coins mature at 101 instead of 120 blocks
- Add `-regtest` mode, similar to testnet but private with instant block
generation with `setgenerate` RPC.
- Add separate darkcoin-cli client
Masternodes:
- Improve support for start-many with multi masternode config
- New masternode rpc commands: stop-many, start-alias, stop-alias, list-conf
- Fixed possible masternode payments exploit
- Better support for non-specific masternode payments
- Added masternode support for regtest
- Randomly sort masternodes before picking next winner
- Show number of masternodes in debug window
Darksend:
- Reduced lower darksend limit to 1.5 DRK
- Fixed progress bar calculation for low amounts
- Improved support for adding DRK after anon has completed
- Added denomination information to Overview tab
- Added more detailed Darksend status information to Overview tab
- Added Darksend high precision matching engine
RPC:
- Add `getwalletinfo`, `getblockchaininfo` and `getnetworkinfo` calls
(will replace hodge-podge `getinfo` at some point)
- Add a `relayfee` field to `getnetworkinfo`
- Always show syncnode in `getpeerinfo`
- `sendrawtransaction`: report the reject code and reason, and make it possible
to re-send transactions that are already in the mempool
- `getmininginfo` show right genproclimit
- New notion of 'conflicted' transactions, reported as confirmations: -1
- 'listreceivedbyaddress' now provides tx ids
- Add raw transaction hex to 'gettransaction' output
- Updated help and tests for 'getreceivedby(account|address)'
- In 'getblock', accept 2nd 'verbose' parameter, similar to getrawtransaction,
but defaulting to 1 for backward compatibility
- Add 'verifychain', to verify chain database at runtime
- Add 'dumpwallet' and 'importwallet' RPCs
- 'keypoolrefill' gains optional size parameter
- Add 'getbestblockhash', to return tip of best chain
- Add 'chainwork' (the total work done by all blocks since the genesis block)
to 'getblock' output
- Make RPC password resistant to timing attacks
- Clarify help messages and add examples
- Add 'getrawchangeaddress' call for raw transaction change destinations
- Reject insanely high fees by default in 'sendrawtransaction'
- Add RPC call 'decodescript' to decode a hex-encoded transaction script
- Make 'validateaddress' provide redeemScript
- Add 'getnetworkhashps' to get the calculated network hashrate
- New RPC 'ping' command to request ping, new 'pingtime' and 'pingwait' fields
in 'getpeerinfo' output
- Adding new 'addrlocal' field to 'getpeerinfo' output
- Add verbose boolean to 'getrawmempool'
- Add rpc command 'getunconfirmedbalance' to obtain total unconfirmed balance
- Explicitly ensure that wallet is unlocked in `importprivkey`
- Add check for valid keys in `importprivkey`
Command-line options:
- Fix `-printblocktree` output
- Show error message if ReadConfigFile fails
- New option: -nospendzeroconfchange to never spend unconfirmed change outputs
- New option: -zapwallettxes to rebuild the wallet's transaction information
- Rename option '-tor' to '-onion' to better reflect what it does
- Add '-disablewallet' mode to let darkcoind run entirely without wallet (when
built with wallet)
- Update default '-rpcsslciphers' to include TLSv1.2
- make '-logtimestamps' default on and rework help-message
- RPC client option: '-rpcwait', to wait for server start
- Remove '-logtodebugger'
- Allow `-noserver` with darkcoind
Block-chain handling and storage:
- Upgrade leveldb to 1.17
- Check for correct genesis (prevent cases where a datadir from the wrong
network is accidentally loaded)
- Allow txindex to be removed and add a reindex dialog
- Log aborted block database rebuilds
- Store orphan blocks in serialized form, to save memory
- Limit the number of orphan blocks in memory to 750
- Fix non-standard disconnected transactions causing mempool orphans
Protocol and network code:
- Don't poll showmyip.com, it doesn't exist anymore
- Add a way to limit deserialized string lengths and use it
- Increase IsStandard() scriptSig length
- Avoid querying DNS seeds, if we have open connections
- Remove a useless millisleep in socket handler
- Stricter memory limits on CNode
- Better orphan transaction handling
- Add `-maxorphantx=<n>` and `-maxorphanblocks=<n>` options for control over the
maximum orphan transactions and blocks
- Per-peer block download tracking and stalled download detection
- Prevent socket leak in ThreadSocketHandler and correct some proxy related
socket leaks
- Use pnode->nLastRecv as sync score (was the wrong way around)
- Drop the fee required to relay a transaction to 0.01mDRK per kilobyte
- Send tx relay flag with version
- New 'reject' P2P message (BIP 0061, see
https://gist.github.com/gavinandresen/7079034 for draft)
- Dump addresses every 15 minutes instead of 10 seconds
- Relay OP_RETURN data TxOut as standard transaction type
- Remove CENT-output free transaction rule when relaying
- Lower maximum size for free transaction creation
- Send multiple inv messages if mempool.size > MAX_INV_SZ
- Split MIN_PROTO_VERSION into INIT_PROTO_VERSION and MIN_PEER_PROTO_VERSION
- Do not treat fFromMe transaction differently when broadcasting
- Process received messages one at a time without sleeping between messages
- Improve logging of failed connections
- Add some additional logging to give extra network insight
Wallet:
- Check redeemScript size does not exceed 520 byte limit
- Ignore (and warn about) too-long redeemScripts while loading wallet
- Make GetAvailableCredit run GetHash() only once per transaction (performance
improvement)
- Lower paytxfee warning threshold
- Fix importwallet nTimeFirstKey (trigger necessary rescans)
- Log BerkeleyDB version at startup
- CWallet init fix
- Bug fixes and new regression tests to correctly compute
the balance of wallets containing double-spent (or mutated) transactions
- Store key creation time. Calculate whole-wallet birthday.
- Optimize rescan to skip blocks prior to birthday
- Let user select wallet file with -wallet=foo.dat
- Don't count txins for priority to encourage sweeping
- Don't create empty transactions when reading a corrupted wallet
- Fix rescan to start from beginning after importprivkey
Mining:
- Increase default -blockmaxsize/prioritysize to 750K/50K
- 'getblocktemplate' does not require a key to create a block template
- Mining code fee policy now matches relay fee policy
GUI:
- fix 'opens in testnet mode when presented with a BIP-72 link with no fallback'
- AvailableCoins: acquire cs_main mutex
- Fix unicode character display on MacOSX
- Fix various coin control visual issues
- Show number of in/out connections in debug console
- Show weeks as well as years behind for long timespans behind
- Enable and disable the Show and Remove buttons for requested payments history
based on whether any entry is selected.
- Show also value for options overridden on command line in options dialog
- Fill in label from address book also for URIs
- Fixes feel when resizing the last column on tables
- Fix ESC in disablewallet mode
- Add expert section to wallet tab in optionsdialog
- Do proper boost::path conversion (fixes unicode in datadir)
- Only override -datadir if different from the default (fixes -datadir in config
file)
- Show rescan progress at start-up
- Show importwallet progress
- Get required locks upfront in polling functions (avoids hanging on locks)
- Catch Windows shutdown events while client is running
- Optionally add third party links to transaction context menu
- Check for !pixmap() before trying to export QR code (avoids crashes when no QR
code could be generated)
- Fix "Start darkcoin on system login"
- Switch to Qt 5.2.0 for Windows build
- Add payment request (BIP 0070) support
- Improve options dialog
- Show transaction fee in new send confirmation dialog
- Add total balance in overview page
- Allow user to choose data directory on first start, when data directory is
missing, or when the -choosedatadir option is passed
- Save and restore window positions
- Add vout index to transaction id in transactions details dialog
- Add network traffic graph in debug window
- Add open URI dialog
- Improve receive coins workflow: make the 'Receive' tab into a form to request
payments, and move historical address list functionality to File menu.
- Move initialization/shutdown to a thread. This prevents "Not responding"
messages during startup. Also show a window during shutdown.
- Don't regenerate autostart link on every client startup
- Show and store message of normal darkcoin:URI
- Fix richtext detection hang issue on very old Qt versions
- OS X: Make use of the 10.8+ user notification center to display Growl-like
notifications
- OS X: Added NSHighResolutionCapable flag to Info.plist for better font
rendering on Retina displays.
- OS X: Fix darkcoin-qt startup crash when clicking dock icon
- Linux: Fix Gnome darkcoin: URI handler
Validation:
- Log reason for non-standard transaction rejection
- Prune provably-unspendable outputs, and adapt consistency check for it.
- Detect any sufficiently long fork and add a warning
- Call the -alertnotify script when we see a long or invalid fork
- Fix multi-block reorg transaction resurrection
- Reject non-canonically-encoded serialization sizes
- Reject dust amounts during validation
- Accept nLockTime transactions that finalize in the next block
Build system:
- Add OSX build descriptors to gitian
- Fix explicit --disable-qt-dbus
- Don't require db_cxx.h when compiling with wallet disabled and GUI enabled
- Improve missing boost error reporting
- gitian-linux: --enable-glibc-back-compat for binary compatibility with old
distributions
- gitian: don't export any symbols from executable
- gitian: build against Qt 4.6
- devtools: add script to check symbols from Linux gitian executables
- Remove build-time no-IPv6 setting
- Add statically built executables to Linux build
- Switch to autotools-based build system
- Build without wallet by passing `--disable-wallet` to configure, this
removes the BerkeleyDB dependency
- Upgrade gitian dependencies (libpng, libz, libupnpc, boost, openssl) to more
recent versions
- Windows 64-bit build support
- Solaris compatibility fixes
- Check integrity of gitian input source tarballs
- Enable full GCC Stack-smashing protection for all OSes
Miscellaneous:
- key.cpp: fail with a friendlier message on missing ssl EC support
- Remove bignum dependency for scripts
- Upgrade OpenSSL to 1.0.1i, includes CVE-2014-0224, CVE-2014-0160 and
CVE-2014-0076 (see https://www.openssl.org/news/secadv_20140806.txt)
- Upgrade miniupnpc to 1.9.20140701
- Fix boost detection in build system on some platforms
- Replace non-threadsafe C functions (gmtime, strerror and setlocale)
- Add missing cs_main and wallet locks
- Avoid exception at startup when system locale not recognized
- devtools: add a script to fetch and postprocess translations

View File

@ -1,411 +0,0 @@
Bitcoin Core version 0.9.0 is now available from:
https://bitcoin.org/bin/0.9.0/
This is a new major version release, bringing both new features and
bug fixes.
Please report bugs using the issue tracker at github:
https://github.com/bitcoin/bitcoin/issues
How to Upgrade
--------------
If you are running an older version, shut it down. Wait until it has completely
shut down (which might take a few minutes for older versions), uninstall all
earlier versions of Bitcoin, then run the installer (on Windows) or just copy
over /Applications/Bitcoin-Qt (on Mac) or bitcoind/bitcoin-qt (on Linux).
If you are upgrading from version 0.7.2 or earlier, the first time you run
0.9.0 your blockchain files will be re-indexed, which will take anywhere from
30 minutes to several hours, depending on the speed of your machine.
On Windows, do not forget to uninstall all earlier versions of the Bitcoin
client first, especially if you are switching to the 64-bit version.
Windows 64-bit installer
-------------------------
New in 0.9.0 is the Windows 64-bit version of the client. There have been
frequent reports of users running out of virtual memory on 32-bit systems
during the initial sync. Because of this it is recommended to install the
64-bit version if your system supports it.
NOTE: Release candidate 2 Windows binaries are not code-signed; use PGP
and the SHA256SUMS.asc file to make sure your binaries are correct.
In the final 0.9.0 release, Windows setup.exe binaries will be code-signed.
OSX 10.5 / 32-bit no longer supported
-------------------------------------
0.9.0 drops support for older Macs. The minimum requirements are now:
* A 64-bit-capable CPU (see http://support.apple.com/kb/ht3696);
* Mac OS 10.6 or later (see https://support.apple.com/kb/ht1633).
Downgrading warnings
--------------------
The 'chainstate' for this release is not always compatible with previous
releases, so if you run 0.9 and then decide to switch back to a
0.8.x release you might get a blockchain validation error when starting the
old release (due to 'pruned outputs' being omitted from the index of
unspent transaction outputs).
Running the old release with the -reindex option will rebuild the chainstate
data structures and correct the problem.
Also, the first time you run a 0.8.x release on a 0.9 wallet it will rescan
the blockchain for missing spent coins, which will take a long time (tens
of minutes on a typical machine).
Rebranding to Bitcoin Core
---------------------------
To reduce confusion between Bitcoin-the-network and Bitcoin-the-software we
have renamed the reference client to Bitcoin Core.
OP_RETURN and data in the block chain
-------------------------------------
On OP_RETURN: There was been some confusion and misunderstanding in
the community, regarding the OP_RETURN feature in 0.9 and data in the
blockchain. This change is not an endorsement of storing data in the
blockchain. The OP_RETURN change creates a provably-prunable output,
to avoid data storage schemes -- some of which were already deployed --
that were storing arbitrary data such as images as forever-unspendable
TX outputs, bloating bitcoin's UTXO database.
Storing arbitrary data in the blockchain is still a bad idea; it is less
costly and far more efficient to store non-currency data elsewhere.
Autotools build system
-----------------------
For 0.9.0 we switched to an autotools-based build system instead of individual
(q)makefiles.
Using the standard "./autogen.sh; ./configure; make" to build Bitcoin-Qt and
bitcoind makes it easier for experienced open source developers to contribute
to the project.
Be sure to check doc/build-*.md for your platform before building from source.
Bitcoin-cli
-------------
Another change in the 0.9 release is moving away from the bitcoind executable
functioning both as a server and as a RPC client. The RPC client functionality
("tell the running bitcoin daemon to do THIS") was split into a separate
executable, 'bitcoin-cli'. The RPC client code will eventually be removed from
bitcoind, but will be kept for backwards compatibility for a release or two.
`walletpassphrase` RPC
-----------------------
The behavior of the `walletpassphrase` RPC when the wallet is already unlocked
has changed between 0.8 and 0.9.
The 0.8 behavior of `walletpassphrase` is to fail when the wallet is already unlocked:
> walletpassphrase 1000
walletunlocktime = now + 1000
> walletpassphrase 10
Error: Wallet is already unlocked (old unlock time stays)
The new behavior of `walletpassphrase` is to set a new unlock time overriding
the old one:
> walletpassphrase 1000
walletunlocktime = now + 1000
> walletpassphrase 10
walletunlocktime = now + 10 (overriding the old unlock time)
Transaction malleability-related fixes
--------------------------------------
This release contains a few fixes for transaction ID (TXID) malleability
issues:
- -nospendzeroconfchange command-line option, to avoid spending
zero-confirmation change
- IsStandard() transaction rules tightened to prevent relaying and mining of
mutated transactions
- Additional information in listtransactions/gettransaction output to
report wallet transactions that conflict with each other because
they spend the same outputs.
- Bug fixes to the getbalance/listaccounts RPC commands, which would report
incorrect balances for double-spent (or mutated) transactions.
- New option: -zapwallettxes to rebuild the wallet's transaction information
Transaction Fees
----------------
This release drops the default fee required to relay transactions across the
network and for miners to consider the transaction in their blocks to
0.01mBTC per kilobyte.
Note that getting a transaction relayed across the network does NOT guarantee
that the transaction will be accepted by a miner; by default, miners fill
their blocks with 50 kilobytes of high-priority transactions, and then with
700 kilobytes of the highest-fee-per-kilobyte transactions.
The minimum relay/mining fee-per-kilobyte may be changed with the
minrelaytxfee option. Note that previous releases incorrectly used
the mintxfee setting to determine which low-priority transactions should
be considered for inclusion in blocks.
The wallet code still uses a default fee for low-priority transactions of
0.1mBTC per kilobyte. During periods of heavy transaction volume, even this
fee may not be enough to get transactions confirmed quickly; the mintxfee
option may be used to override the default.
0.9.0 Release notes
=======================
RPC:
- New notion of 'conflicted' transactions, reported as confirmations: -1
- 'listreceivedbyaddress' now provides tx ids
- Add raw transaction hex to 'gettransaction' output
- Updated help and tests for 'getreceivedby(account|address)'
- In 'getblock', accept 2nd 'verbose' parameter, similar to getrawtransaction,
but defaulting to 1 for backward compatibility
- Add 'verifychain', to verify chain database at runtime
- Add 'dumpwallet' and 'importwallet' RPCs
- 'keypoolrefill' gains optional size parameter
- Add 'getbestblockhash', to return tip of best chain
- Add 'chainwork' (the total work done by all blocks since the genesis block)
to 'getblock' output
- Make RPC password resistant to timing attacks
- Clarify help messages and add examples
- Add 'getrawchangeaddress' call for raw transaction change destinations
- Reject insanely high fees by default in 'sendrawtransaction'
- Add RPC call 'decodescript' to decode a hex-encoded transaction script
- Make 'validateaddress' provide redeemScript
- Add 'getnetworkhashps' to get the calculated network hashrate
- New RPC 'ping' command to request ping, new 'pingtime' and 'pingwait' fields
in 'getpeerinfo' output
- Adding new 'addrlocal' field to 'getpeerinfo' output
- Add verbose boolean to 'getrawmempool'
- Add rpc command 'getunconfirmedbalance' to obtain total unconfirmed balance
- Explicitly ensure that wallet is unlocked in `importprivkey`
- Add check for valid keys in `importprivkey`
Command-line options:
- New option: -nospendzeroconfchange to never spend unconfirmed change outputs
- New option: -zapwallettxes to rebuild the wallet's transaction information
- Rename option '-tor' to '-onion' to better reflect what it does
- Add '-disablewallet' mode to let bitcoind run entirely without wallet (when
built with wallet)
- Update default '-rpcsslciphers' to include TLSv1.2
- make '-logtimestamps' default on and rework help-message
- RPC client option: '-rpcwait', to wait for server start
- Remove '-logtodebugger'
- Allow `-noserver` with bitcoind
Block-chain handling and storage:
- Update leveldb to 1.15
- Check for correct genesis (prevent cases where a datadir from the wrong
network is accidentally loaded)
- Allow txindex to be removed and add a reindex dialog
- Log aborted block database rebuilds
- Store orphan blocks in serialized form, to save memory
- Limit the number of orphan blocks in memory to 750
- Fix non-standard disconnected transactions causing mempool orphans
- Add a new checkpoint at block 279,000
Wallet:
- Bug fixes and new regression tests to correctly compute
the balance of wallets containing double-spent (or mutated) transactions
- Store key creation time. Calculate whole-wallet birthday.
- Optimize rescan to skip blocks prior to birthday
- Let user select wallet file with -wallet=foo.dat
- Consider generated coins mature at 101 instead of 120 blocks
- Improve wallet load time
- Don't count txins for priority to encourage sweeping
- Don't create empty transactions when reading a corrupted wallet
- Fix rescan to start from beginning after importprivkey
- Only create signatures with low S values
Mining:
- Increase default -blockmaxsize/prioritysize to 750K/50K
- 'getblocktemplate' does not require a key to create a block template
- Mining code fee policy now matches relay fee policy
Protocol and network:
- Drop the fee required to relay a transaction to 0.01mBTC per kilobyte
- Send tx relay flag with version
- New 'reject' P2P message (BIP 0061, see
https://gist.github.com/gavinandresen/7079034 for draft)
- Dump addresses every 15 minutes instead of 10 seconds
- Relay OP_RETURN data TxOut as standard transaction type
- Remove CENT-output free transaction rule when relaying
- Lower maximum size for free transaction creation
- Send multiple inv messages if mempool.size > MAX_INV_SZ
- Split MIN_PROTO_VERSION into INIT_PROTO_VERSION and MIN_PEER_PROTO_VERSION
- Do not treat fFromMe transaction differently when broadcasting
- Process received messages one at a time without sleeping between messages
- Improve logging of failed connections
- Bump protocol version to 70002
- Add some additional logging to give extra network insight
- Added new DNS seed from bitcoinstats.com
Validation:
- Log reason for non-standard transaction rejection
- Prune provably-unspendable outputs, and adapt consistency check for it.
- Detect any sufficiently long fork and add a warning
- Call the -alertnotify script when we see a long or invalid fork
- Fix multi-block reorg transaction resurrection
- Reject non-canonically-encoded serialization sizes
- Reject dust amounts during validation
- Accept nLockTime transactions that finalize in the next block
Build system:
- Switch to autotools-based build system
- Build without wallet by passing `--disable-wallet` to configure, this
removes the BerkeleyDB dependency
- Upgrade gitian dependencies (libpng, libz, libupnpc, boost, openssl) to more
recent versions
- Windows 64-bit build support
- Solaris compatibility fixes
- Check integrity of gitian input source tarballs
- Enable full GCC Stack-smashing protection for all OSes
GUI:
- Switch to Qt 5.2.0 for Windows build
- Add payment request (BIP 0070) support
- Improve options dialog
- Show transaction fee in new send confirmation dialog
- Add total balance in overview page
- Allow user to choose data directory on first start, when data directory is
missing, or when the -choosedatadir option is passed
- Save and restore window positions
- Add vout index to transaction id in transactions details dialog
- Add network traffic graph in debug window
- Add open URI dialog
- Add Coin Control Features
- Improve receive coins workflow: make the 'Receive' tab into a form to request
payments, and move historical address list functionality to File menu.
- Rebrand to `Bitcoin Core`
- Move initialization/shutdown to a thread. This prevents "Not responding"
messages during startup. Also show a window during shutdown.
- Don't regenerate autostart link on every client startup
- Show and store message of normal bitcoin:URI
- Fix richtext detection hang issue on very old Qt versions
- OS X: Make use of the 10.8+ user notification center to display Growl-like
notifications
- OS X: Added NSHighResolutionCapable flag to Info.plist for better font
rendering on Retina displays.
- OS X: Fix bitcoin-qt startup crash when clicking dock icon
- Linux: Fix Gnome bitcoin: URI handler
Miscellaneous:
- Add Linux script (contrib/qos/tc.sh) to limit outgoing bandwidth
- Add '-regtest' mode, similar to testnet but private with instant block
generation with 'setgenerate' RPC.
- Add 'linearize.py' script to contrib, for creating bootstrap.dat
- Add separate bitcoin-cli client
Credits
--------
Thanks to everyone who contributed to this release:
- Andrey
- Ashley Holman
- b6393ce9-d324-4fe1-996b-acf82dbc3d53
- bitsofproof
- Brandon Dahler
- Calvin Tam
- Christian Decker
- Christian von Roques
- Christopher Latham
- Chuck
- coblee
- constantined
- Cory Fields
- Cozz Lovan
- daniel
- Daniel Larimer
- David Hill
- Dmitry Smirnov
- Drak
- Eric Lombrozo
- fanquake
- fcicq
- Florin
- frewil
- Gavin Andresen
- Gregory Maxwell
- gubatron
- Guillermo Céspedes Tabárez
- Haakon Nilsen
- HaltingState
- Han Lin Yap
- harry
- Ian Kelling
- Jeff Garzik
- Johnathan Corgan
- Jonas Schnelli
- Josh Lehan
- Josh Triplett
- Julian Langschaedel
- Kangmo
- Lake Denman
- Luke Dashjr
- Mark Friedenbach
- Matt Corallo
- Michael Bauer
- Michael Ford
- Michagogo
- Midnight Magic
- Mike Hearn
- Nils Schneider
- Noel Tiernan
- Olivier Langlois
- patrick s
- Patrick Strateman
- paveljanik
- Peter Todd
- phantomcircuit
- phelixbtc
- Philip Kaufmann
- Pieter Wuille
- Rav3nPL
- R E Broadley
- regergregregerrge
- Robert Backhaus
- Roman Mindalev
- Rune K. Svendsen
- Ryan Niebur
- Scott Ellis
- Scott Willeke
- Sergey Kazenyuk
- Shawn Wilkinson
- Sined
- sje
- Subo1978
- super3
- Tamas Blummer
- theuni
- Thomas Holenstein
- Timon Rapp
- Timothy Stranex
- Tom Geller
- Torstein Husebø
- Vaclav Vobornik
- vhf / victor felder
- Vinnie Falco
- Warren Togami
- Wil Bown
- Wladimir J. van der Laan

View File

@ -62,7 +62,7 @@ void ProcessMessageMasternode(CNode* pfrom, std::string& strCommand, CDataStream
return;
}
bool isLocal = addr.IsRFC1918();
bool isLocal = addr.IsRFC1918() || addr.IsLocal();
std::string vchPubKey(pubkey.begin(), pubkey.end());
std::string vchPubKey2(pubkey2.begin(), pubkey2.end());