Merge pull request #4259 from PastaPastaPasta/backport-triv-pr13

backport: 'trivial' pr14

build-aux/m4/ax_boost_thread.m4

@@ -30,7 +30,7 @@
 #   and this notice are preserved. This file is offered as-is, without any
 #   warranty.
 
-#serial 32
+#serial 33
 
 AC_DEFUN([AX_BOOST_THREAD],
 [
@@ -67,13 +67,24 @@ AC_DEFUN([AX_BOOST_THREAD],
         [AC_LANG_PUSH([C++])
              CXXFLAGS_SAVE=$CXXFLAGS
 
-             if test "x$host_os" = "xsolaris" ; then
-                 CXXFLAGS="-pthreads $CXXFLAGS"
-             elif test "x$host_os" = "xmingw32" ; then
-                 CXXFLAGS="-mthreads $CXXFLAGS"
-             else
-                CXXFLAGS="-pthread $CXXFLAGS"
-             fi
+             case "x$host_os" in
+                 xsolaris )
+                     CXXFLAGS="-pthreads $CXXFLAGS"
+                     break;
+                     ;;
+                 xmingw32 )
+                     CXXFLAGS="-mthreads $CXXFLAGS"
+                     break;
+                     ;;
+                 *android* )
+                     break;
+                     ;;
+                 * )
+                     CXXFLAGS="-pthread $CXXFLAGS"
+                     break;
+                     ;;
+             esac
+
              AC_COMPILE_IFELSE([
                  AC_LANG_PROGRAM(
                      [[@%:@include <boost/thread/thread.hpp>]],
@@ -84,13 +95,23 @@ AC_DEFUN([AX_BOOST_THREAD],
              AC_LANG_POP([C++])
         ])
         if test "x$ax_cv_boost_thread" = "xyes"; then
-           if test "x$host_os" = "xsolaris" ; then
-              BOOST_CPPFLAGS="-pthreads $BOOST_CPPFLAGS"
-           elif test "x$host_os" = "xmingw32" ; then
-              BOOST_CPPFLAGS="-mthreads $BOOST_CPPFLAGS"
-           else
-              BOOST_CPPFLAGS="-pthread $BOOST_CPPFLAGS"
-           fi
+            case "x$host_os" in
+                xsolaris )
+                    BOOST_CPPFLAGS="-pthreads $BOOST_CPPFLAGS"
+                    break;
+                    ;;
+                xmingw32 )
+                    BOOST_CPPFLAGS="-mthreads $BOOST_CPPFLAGS"
+                    break;
+                    ;;
+                *android* )
+                    break;
+                    ;;
+                * )
+                    BOOST_CPPFLAGS="-pthread $BOOST_CPPFLAGS"
+                    break;
+                    ;;
+            esac
 
             AC_SUBST(BOOST_CPPFLAGS)
 
@@ -148,6 +169,9 @@ AC_DEFUN([AX_BOOST_THREAD],
                     xmingw32 )
                         break;
                         ;;
+                    *android* )
+                        break;
+                        ;;
                     * )
                         BOOST_THREAD_LIB="$BOOST_THREAD_LIB -lpthread"
                         break;

build-aux/m4/bitcoin_qt.m4

@@ -79,10 +79,19 @@ AC_DEFUN([BITCOIN_QT_INIT],[
 
   AC_ARG_WITH([qtdbus],
     [AS_HELP_STRING([--with-qtdbus],
-    [enable DBus support (default is yes if qt is enabled and QtDBus is found)])],
+    [enable DBus support (default is yes if qt is enabled and QtDBus is found, except on Android)])],
     [use_dbus=$withval],
     [use_dbus=auto])
 
+  dnl Android doesn't support D-Bus and certainly doesn't use it for notifications
+  case $host in
+    *android*)
+      if test "x$use_dbus" != xyes; then
+        use_dbus=no
+      fi
+    ;;
+  esac
+
   AC_SUBST(QT_TRANSLATION_DIR,$qt_translation_path)
 ])
 

configure.ac

@@ -110,9 +110,6 @@ AC_PATH_TOOL(CPPFILT, c++filt)
 AC_PATH_TOOL(OBJCOPY, objcopy)
 AC_PATH_TOOL(DSYMUTIL, dsymutil)
 AC_PATH_PROG(DOXYGEN, doxygen)
-if test -z "$DOXYGEN"; then
-   AC_MSG_WARN([Doxygen not found])
-fi
 AM_CONDITIONAL([HAVE_DOXYGEN], [test -n "$DOXYGEN"])
 
 AC_ARG_VAR(PYTHONPATH, Augments the default search path for python module files)
@@ -635,6 +632,7 @@ case $host in
            BUILD_OS=darwin
            ;;
          *)
+           AC_PATH_TOOL([DSYMUTIL], [dsymutil], dsymutil)
            AC_PATH_TOOL([INSTALLNAMETOOL], [install_name_tool], install_name_tool)
            AC_PATH_TOOL([OTOOL], [otool], otool)
            AC_PATH_PROGS([GENISOIMAGE], [genisoimage mkisofs],genisoimage)

doc/zmq.md

@@ -1,6 +1,6 @@
 # Block and Transaction Broadcasting with ZeroMQ
 
-[ZeroMQ](http://zeromq.org/) is a lightweight wrapper around TCP
+[ZeroMQ](https://zeromq.org/) is a lightweight wrapper around TCP
 connections, inter-process communication, and shared-memory,
 providing various message-oriented semantics such as publish/subscribe,
 request/reply, and push/pull.
@@ -37,8 +37,9 @@ The ZeroMQ feature in Dash Core requires ZeroMQ API version 4.x or
 newer. Typically, it is packaged by distributions as something like
 *libzmq3-dev*. The C++ wrapper for ZeroMQ is *not* needed.
 
-In order to run the example Python client scripts in contrib/ one must
-also install *python3-zmq*, though this is not necessary for daemon
+In order to run the example Python client scripts in the `contrib/zmq/`
+directory, one must also install [PyZMQ](https://github.com/zeromq/pyzmq)
+(generally with `pip install pyzmq`), though this is not necessary for daemon
 operation.
 
 ## Enabling

src/.clang-format

@@ -1,9 +1,9 @@
 Language:        Cpp
 AccessModifierOffset: -4
-AlignAfterOpenBracket: false
+AlignAfterOpenBracket: true
 AlignEscapedNewlinesLeft: true
 AlignTrailingComments: true
-AllowAllParametersOfDeclarationOnNextLine: false
+AllowAllParametersOfDeclarationOnNextLine: true
 AllowShortBlocksOnASingleLine: false
 AllowShortFunctionsOnASingleLine: All
 AllowShortIfStatementsOnASingleLine: true

src/chain.h

@@ -424,12 +424,6 @@ public:
         return vChain[nHeight];
     }
 
-    /** Compare two chains efficiently. */
-    friend bool operator==(const CChain &a, const CChain &b) {
-        return a.vChain.size() == b.vChain.size() &&
-               a.vChain[a.vChain.size() - 1] == b.vChain[b.vChain.size() - 1];
-    }
-
     /** Efficiently check whether a block is present in this chain. */
     bool Contains(const CBlockIndex *pindex) const {
         return (*this)[pindex->nHeight] == pindex;

src/core_write.cpp

@@ -120,8 +120,9 @@ std::string ScriptToAsmStr(const CScript& script, const bool fAttemptSighashDeco
                     // checks in CheckSignatureEncoding.
                     if (CheckSignatureEncoding(vch, SCRIPT_VERIFY_STRICTENC, nullptr)) {
                         const unsigned char chSigHashType = vch.back();
-                        if (mapSigHashTypes.count(chSigHashType)) {
-                            strSigHashDecode = "[" + mapSigHashTypes.find(chSigHashType)->second + "]";
+                        const auto it = mapSigHashTypes.find(chSigHashType);
+                        if (it != mapSigHashTypes.end()) {
+                            strSigHashDecode = "[" + it->second + "]";
                             vch.pop_back(); // remove the sighash type byte. it will be replaced by the decode.
                         }
                     }

src/dbwrapper.h

@@ -345,18 +345,6 @@ public:
     // Get an estimate of LevelDB memory usage (in bytes).
     size_t DynamicMemoryUsage() const;
 
-    // not available for LevelDB; provide for compatibility with BDB
-    bool Flush()
-    {
-        return true;
-    }
-
-    bool Sync()
-    {
-        CDBBatch batch(*this);
-        return WriteBatch(batch, true);
-    }
-
     CDBIterator *NewIterator()
     {
         return new CDBIterator(*this, pdb->NewIterator(iteroptions));

src/miner.cpp

@@ -118,7 +118,7 @@ std::unique_ptr<CBlockTemplate> BlockAssembler::CreateNewBlock(const CScript& sc
 
     if(!pblocktemplate.get())
         return nullptr;
-    pblock = &pblocktemplate->block; // pointer for convenience
+    CBlock* const pblock = &pblocktemplate->block; // pointer for convenience
 
     // Add dummy coinbase tx as first transaction
     pblock->vtx.emplace_back();
@@ -281,7 +281,7 @@ bool BlockAssembler::TestPackageTransactions(const CTxMemPool::setEntries& packa
 
 void BlockAssembler::AddToBlock(CTxMemPool::txiter iter)
 {
-    pblock->vtx.emplace_back(iter->GetSharedTx());
+    pblocktemplate->block.vtx.emplace_back(iter->GetSharedTx());
     pblocktemplate->vTxFees.push_back(iter->GetFee());
     pblocktemplate->vTxSigOps.push_back(iter->GetSigOpCount());
     nBlockSize += iter->GetTxSize();

src/miner.h

@@ -129,8 +129,6 @@ class BlockAssembler
 private:
     // The constructed block template
     std::unique_ptr<CBlockTemplate> pblocktemplate;
-    // A convenience pointer that always refers to the CBlock in pblocktemplate
-    CBlock* pblock;
 
     // Configuration parameters for the block size
     unsigned int nBlockMaxSize;

src/net_processing.cpp

@@ -1400,7 +1400,6 @@ bool static AlreadyHave(const CInv& inv) EXCLUSIVE_LOCKS_REQUIRED(cs_main)
 
 static void RelayAddress(const CAddress& addr, bool fReachable, CConnman* connman)
 {
-    unsigned int nRelayNodes = fReachable ? 2 : 1; // limited relaying of addresses outside our network(s)
 
     // Relay to a limited number of other nodes
     // Use deterministic randomness to send to the same nodes for 24 hours
@@ -1409,6 +1408,9 @@ static void RelayAddress(const CAddress& addr, bool fReachable, CConnman* connma
     const CSipHasher hasher = connman->GetDeterministicRandomizer(RANDOMIZER_ID_ADDRESS_RELAY).Write(hashAddr << 32).Write((GetTime() + hashAddr) / (24*60*60));
     FastRandomContext insecure_rand;
 
+    // Relay reachable addresses to 2 peers. Unreachable addresses are relayed randomly to 1 or 2 peers.
+    unsigned int nRelayNodes = (fReachable || (hasher.Finalize() & 1)) ? 2 : 1;
+
     std::array<std::pair<uint64_t, CNode*>,2> best{{{0, nullptr}, {0, nullptr}}};
     assert(nRelayNodes <= best.size());
 

src/netaddress.cpp

@@ -419,17 +419,6 @@ bool CNetAddr::IsLocal() const
 
 bool CNetAddr::IsValid() const
 {
-    // Cleanup 3-byte shifted addresses caused by garbage in size field
-    // of addr messages from versions before 0.2.9 checksum.
-    // Two consecutive addr messages look like this:
-    // header20 vectorlen3 addr26 addr26 addr26 header20 vectorlen3 addr26 addr26 addr26...
-    // so if the first length field is garbled, it reads the second batch
-    // of addr misaligned by 3 bytes.
-    if (IsIPv6() && memcmp(m_addr.data(), IPV4_IN_IPV6_PREFIX.data() + 3,
-                           sizeof(IPV4_IN_IPV6_PREFIX) - 3) == 0) {
-        return false;
-    }
-
     // unspecified IPv6 address (::/128)
     unsigned char ipNone6[16] = {};
     if (IsIPv6() && memcmp(m_addr.data(), ipNone6, sizeof(ipNone6)) == 0) {

src/protocol.cpp

@@ -8,10 +8,6 @@
 #include <util/system.h>
 #include <util/strencodings.h>
 
-#ifndef WIN32
-# include <arpa/inet.h>
-#endif
-
 static std::atomic<bool> g_initial_block_download_completed(false);
 
 namespace NetMsgType {

src/protocol.h

@@ -60,19 +60,16 @@ namespace NetMsgType {
 /**
  * The version message provides information about the transmitting node to the
  * receiving node at the beginning of a connection.
- * @see https://bitcoin.org/en/developer-reference#version
  */
 extern const char *VERSION;
 /**
  * The verack message acknowledges a previously-received version message,
  * informing the connecting node that it can begin to send other messages.
- * @see https://bitcoin.org/en/developer-reference#verack
  */
 extern const char *VERACK;
 /**
  * The addr (IP address) message relays connection information for peers on the
  * network.
- * @see https://bitcoin.org/en/developer-reference#addr
  */
 extern const char *ADDR;
 /**
@@ -90,82 +87,69 @@ extern const char *SENDADDRV2;
 /**
  * The inv message (inventory message) transmits one or more inventories of
  * objects known to the transmitting peer.
- * @see https://bitcoin.org/en/developer-reference#inv
  */
 extern const char *INV;
 /**
  * The getdata message requests one or more data objects from another node.
- * @see https://bitcoin.org/en/developer-reference#getdata
  */
 extern const char *GETDATA;
 /**
  * The merkleblock message is a reply to a getdata message which requested a
  * block using the inventory type MSG_MERKLEBLOCK.
  * @since protocol version 70001 as described by BIP37.
- * @see https://bitcoin.org/en/developer-reference#merkleblock
  */
 extern const char *MERKLEBLOCK;
 /**
  * The getblocks message requests an inv message that provides block header
  * hashes starting from a particular point in the block chain.
- * @see https://bitcoin.org/en/developer-reference#getblocks
  */
 extern const char *GETBLOCKS;
 /**
  * The getheaders message requests a headers message that provides block
  * headers starting from a particular point in the block chain.
  * @since protocol version 31800.
- * @see https://bitcoin.org/en/developer-reference#getheaders
  */
 extern const char *GETHEADERS;
 /**
  * The tx message transmits a single transaction.
- * @see https://bitcoin.org/en/developer-reference#tx
  */
 extern const char *TX;
 /**
  * The headers message sends one or more block headers to a node which
  * previously requested certain headers with a getheaders message.
  * @since protocol version 31800.
- * @see https://bitcoin.org/en/developer-reference#headers
  */
 extern const char *HEADERS;
 /**
  * The block message transmits a single serialized block.
- * @see https://bitcoin.org/en/developer-reference#block
  */
 extern const char *BLOCK;
 /**
  * The getaddr message requests an addr message from the receiving node,
  * preferably one with lots of IP addresses of other receiving nodes.
- * @see https://bitcoin.org/en/developer-reference#getaddr
  */
 extern const char *GETADDR;
 /**
  * The mempool message requests the TXIDs of transactions that the receiving
  * node has verified as valid but which have not yet appeared in a block.
  * @since protocol version 60002.
- * @see https://bitcoin.org/en/developer-reference#mempool
  */
 extern const char *MEMPOOL;
 /**
  * The ping message is sent periodically to help confirm that the receiving
  * peer is still connected.
- * @see https://bitcoin.org/en/developer-reference#ping
  */
 extern const char *PING;
 /**
  * The pong message replies to a ping message, proving to the pinging node that
  * the ponging node is still alive.
  * @since protocol version 60001 as described by BIP31.
- * @see https://bitcoin.org/en/developer-reference#pong
  */
 extern const char *PONG;
 /**
  * The notfound message is a reply to a getdata message which requested an
  * object the receiving node does not have available for relay.
  * @since protocol version 70001.
- * @see https://bitcoin.org/en/developer-reference#notfound
  */
 extern const char *NOTFOUND;
 /**
@@ -174,7 +158,6 @@ extern const char *NOTFOUND;
  * @since protocol version 70001 as described by BIP37.
  *   Only available with service bit NODE_BLOOM since protocol version
  *   70011 as described by BIP111.
- * @see https://bitcoin.org/en/developer-reference#filterload
  */
 extern const char *FILTERLOAD;
 /**
@@ -183,7 +166,6 @@ extern const char *FILTERLOAD;
  * @since protocol version 70001 as described by BIP37.
  *   Only available with service bit NODE_BLOOM since protocol version
  *   70011 as described by BIP111.
- * @see https://bitcoin.org/en/developer-reference#filteradd
  */
 extern const char *FILTERADD;
 /**
@@ -192,7 +174,6 @@ extern const char *FILTERADD;
  * @since protocol version 70001 as described by BIP37.
  *   Only available with service bit NODE_BLOOM since protocol version
  *   70011 as described by BIP111.
- * @see https://bitcoin.org/en/developer-reference#filterclear
  */
 extern const char *FILTERCLEAR;
 /**
@@ -206,7 +187,6 @@ extern const char *REJECT;
  * Indicates that a node prefers to receive new block announcements via a
  * "headers" message rather than an "inv".
  * @since protocol version 70012 as described by BIP130.
- * @see https://bitcoin.org/en/developer-reference#sendheaders
  */
 extern const char *SENDHEADERS;
 

src/qt/forms/debugwindow.ui

@@ -307,7 +307,7 @@
        <item row="11" column="0">
         <widget class="QLabel" name="label_3">
          <property name="text">
-          <string>Current number of blocks</string>
+          <string>Current block height</string>
          </property>
         </widget>
        </item>

src/qt/forms/receivecoinsdialog.ui

@@ -110,6 +110,12 @@
             <property name="text">
              <string>&amp;Request payment</string>
             </property>
+            <property name="autoDefault">
+             <bool>false</bool>
+            </property>
+            <property name="default">
+             <bool>true</bool>
+            </property>
            </widget>
           </item>
           <item>

src/qt/receivecoinsdialog.cpp

@@ -194,22 +194,6 @@ void ReceiveCoinsDialog::resizeEvent(QResizeEvent *event)
     columnResizingFixer->stretchColumnWidth(RecentRequestsTableModel::Message);
 }
 
-void ReceiveCoinsDialog::keyPressEvent(QKeyEvent *event)
-{
-    if (event->key() == Qt::Key_Return)
-    {
-        // press return -> submit form
-        if (ui->reqLabel->hasFocus() || ui->reqAmount->hasFocus() || ui->reqMessage->hasFocus())
-        {
-            event->ignore();
-            on_receiveButton_clicked();
-            return;
-        }
-    }
-
-    this->QDialog::keyPressEvent(event);
-}
-
 QModelIndex ReceiveCoinsDialog::selectedRow()
 {
     if(!model || !model->getRecentRequestsTableModel() || !ui->recentRequestsView->selectionModel())

src/qt/receivecoinsdialog.h

@@ -48,9 +48,6 @@ public Q_SLOTS:
     void reject() override;
     void accept() override;
 
-protected:
-    virtual void keyPressEvent(QKeyEvent *event) override;
-
 private:
     Ui::ReceiveCoinsDialog *ui;
     GUIUtil::TableViewLastColumnResizingFixer *columnResizingFixer;

src/qt/rpcconsole.cpp

@@ -482,6 +482,7 @@ RPCConsole::RPCConsole(interfaces::Node& node, QWidget* parent, Qt::WindowFlags
 
     // Install event filter for up and down arrow
     ui->lineEdit->installEventFilter(this);
+    ui->lineEdit->setMaxLength(16 * 1024 * 1024);
     ui->messagesWidget->installEventFilter(this);
 
     connect(ui->clearButton, SIGNAL(clicked()), this, SLOT(clear()));

src/qt/transactiontablemodel.cpp

@@ -193,17 +193,12 @@ public:
 
     TransactionRecord *index(interfaces::Wallet& wallet, int numBlocks, int idx)
     {
-        if(idx >= 0 && idx < cachedWallet.size())
-        {
+        if (idx >= 0 && idx < cachedWallet.size()) {
             TransactionRecord *rec = &cachedWallet[idx];
 
-            // Get required locks upfront. This avoids the GUI from getting
-            // stuck if the core is holding the locks for a longer time - for
-            // example, during a wallet rescan.
-            //
             // If a status update is needed (blocks came in since last check),
-            //  update the status of this transaction from the wallet. Otherwise,
-            // simply re-use the cached status.
+            // try to update the status of this transaction from the wallet.
+            // Otherwise, simply re-use the cached status.
             interfaces::WalletTxStatus wtx;
             int64_t adjustedTime;
             if (rec->statusUpdateNeeded(numBlocks, parent->getChainLockHeight()) && wallet.tryGetTxStatus(rec->hash, wtx, adjustedTime)) {

src/random.cpp

@@ -245,6 +245,8 @@ void GetOSRand(unsigned char *ent32)
     if (getentropy(ent32, NUM_OS_RANDOM_BYTES) != 0) {
         RandFailure();
     }
+    // Silence a compiler warning about unused function.
+    (void)GetDevURandom;
 #elif defined(HAVE_GETENTROPY_RAND) && defined(MAC_OSX)
     // We need a fallback for OSX < 10.12
     if (&getentropy != nullptr) {
@@ -254,6 +256,8 @@ void GetOSRand(unsigned char *ent32)
     } else {
         GetDevURandom(ent32);
     }
+    // Silence a compiler warning about unused function.
+    (void)GetDevURandom;
 #elif defined(HAVE_SYSCTL_ARND)
     /* FreeBSD and similar. It is possible for the call to return less
      * bytes than requested, so need to read in a loop.
@@ -267,6 +271,8 @@ void GetOSRand(unsigned char *ent32)
         }
         have += len;
     } while (have < NUM_OS_RANDOM_BYTES);
+    // Silence a compiler warning about unused function.
+    (void)GetDevURandom;
 #else
     /* Fall back to /dev/urandom if there is no specific method implemented to
      * get system entropy for this OS.

src/threadsafety.h

@@ -18,9 +18,7 @@
 #define LOCKABLE __attribute__((lockable))
 #define SCOPED_LOCKABLE __attribute__((scoped_lockable))
 #define GUARDED_BY(x) __attribute__((guarded_by(x)))
-#define GUARDED_VAR __attribute__((guarded_var))
 #define PT_GUARDED_BY(x) __attribute__((pt_guarded_by(x)))
-#define PT_GUARDED_VAR __attribute__((pt_guarded_var))
 #define ACQUIRED_AFTER(...) __attribute__((acquired_after(__VA_ARGS__)))
 #define ACQUIRED_BEFORE(...) __attribute__((acquired_before(__VA_ARGS__)))
 #define EXCLUSIVE_LOCK_FUNCTION(...) __attribute__((exclusive_lock_function(__VA_ARGS__)))
@@ -33,14 +31,12 @@
 #define EXCLUSIVE_LOCKS_REQUIRED(...) __attribute__((exclusive_locks_required(__VA_ARGS__)))
 #define SHARED_LOCKS_REQUIRED(...) __attribute__((shared_locks_required(__VA_ARGS__)))
 #define NO_THREAD_SAFETY_ANALYSIS __attribute__((no_thread_safety_analysis))
-#define ASSERT_EXCLUSIVE_LOCK(...) __attribute((assert_exclusive_lock(__VA_ARGS__)))
+#define ASSERT_EXCLUSIVE_LOCK(...) __attribute__((assert_exclusive_lock(__VA_ARGS__)))
 #else
 #define LOCKABLE
 #define SCOPED_LOCKABLE
 #define GUARDED_BY(x)
-#define GUARDED_VAR
 #define PT_GUARDED_BY(x)
-#define PT_GUARDED_VAR
 #define ACQUIRED_AFTER(...)
 #define ACQUIRED_BEFORE(...)
 #define EXCLUSIVE_LOCK_FUNCTION(...)

src/validation.cpp

@@ -4877,7 +4877,6 @@ bool LoadExternalBlockFile(const CChainParams& chainparams, FILE* fileIn, CDiskB
                 if (dbp)
                     dbp->nPos = nBlockPos;
                 blkdat.SetLimit(nBlockPos + nSize);
-                blkdat.SetPos(nBlockPos);
                 std::shared_ptr<CBlock> pblock = std::make_shared<CBlock>();
                 CBlock& block = *pblock;
                 blkdat >> block;

src/wallet/rpcwallet.cpp

@@ -81,7 +81,7 @@ bool EnsureWalletIsAvailable(CWallet * const pwallet, bool avoidException)
     if (avoidException) return false;
     if (!HasWallets()) {
         throw JSONRPCError(
-            RPC_METHOD_NOT_FOUND, "Method not found (wallet method is disabled because no wallet is loaded)");
+            RPC_WALLET_NOT_FOUND, "No wallet is loaded. Load a wallet using loadwallet or create a new one with createwallet. (Note: A default wallet is no longer automatically created)");
     }
     throw JSONRPCError(RPC_WALLET_NOT_SPECIFIED,
         "Wallet file not specified (must request wallet RPC through /wallet/<filename> uri-path).");

test/functional/rpc_blockchain.py

@@ -37,6 +37,8 @@ from test_framework.blocktools import (
     create_coinbase,
 )
 from test_framework.messages import (
+    CBlockHeader,
+    FromHex,
     msg_block,
 )
 from test_framework.mininode import (
@@ -234,6 +236,14 @@ class BlockchainTest(BitcoinTestFramework):
         assert isinstance(int(header['versionHex'], 16), int)
         assert isinstance(header['difficulty'], Decimal)
 
+        # Test with verbose=False, which should return the header as hex.
+        header_hex = node.getblockheader(blockhash=besthash, verbose=False)
+        assert_is_hex_string(header_hex)
+
+        header = FromHex(CBlockHeader(), header_hex)
+        header.calc_sha256()
+        assert_equal(header.hash, besthash)
+
     def _test_getdifficulty(self):
         difficulty = self.nodes[0].getdifficulty()
         # 1 hash in 2 should be valid, so difficulty should be 1/2**31

test/functional/wallet_basic.py

@@ -486,6 +486,9 @@ class WalletTest(BitcoinTestFramework):
             timeout -= 0.5
         assert_equal(len(self.nodes[0].getrawmempool()), chainlimit * 2)
 
+        # Prevent potential race condition when calling wallet RPCs right after restart
+        self.nodes[0].syncwithvalidationinterfacequeue()
+
         node0_balance = self.nodes[0].getbalance()
         # With walletrejectlongchains we will not create the tx and store it in our wallet.
         assert_raises_rpc_error(-4, "Transaction has too long of a mempool chain", self.nodes[0].sendtoaddress, sending_addr, node0_balance - Decimal('0.01'))

test/functional/wallet_multiwallet.py

@@ -183,7 +183,7 @@ class MultiWalletTest(BitcoinTestFramework):
 
         self.restart_node(0, ['-nowallet'])
         assert_equal(node.listwallets(), [])
-        assert_raises_rpc_error(-32601, "Method not found", node.getwalletinfo)
+        assert_raises_rpc_error(-18, "No wallet is loaded. Load a wallet using loadwallet or create a new one with createwallet. (Note: A default wallet is no longer automatically created)", node.getwalletinfo)
 
         self.log.info("Load first wallet")
         loadwallet_name = node.loadwallet(wallet_names[0])
@@ -278,7 +278,7 @@ class MultiWalletTest(BitcoinTestFramework):
         for wallet_name in self.nodes[0].listwallets():
             self.nodes[0].unloadwallet(wallet_name)
         assert_equal(self.nodes[0].listwallets(), [])
-        assert_raises_rpc_error(-32601, "Method not found (wallet method is disabled because no wallet is loaded)", self.nodes[0].getwalletinfo)
+        assert_raises_rpc_error(-18, "No wallet is loaded. Load a wallet using loadwallet or create a new one with createwallet. (Note: A default wallet is no longer automatically created)", self.nodes[0].getwalletinfo)
 
         # Successfully load a previously unloaded wallet
         self.nodes[0].loadwallet('w1')

test/lint/lint-git-commit-check.sh

@@ -0,0 +1,47 @@
+#!/usr/bin/env bash
+# Copyright (c) 2020 The Bitcoin Core developers
+# Distributed under the MIT software license, see the accompanying
+# file COPYING or http://www.opensource.org/licenses/mit-license.php.
+#
+# Linter to check that commit messages have a new line before the body
+# or no body at all
+
+export LC_ALL=C
+
+EXIT_CODE=0
+
+while getopts "?" opt; do
+  case $opt in
+    ?)
+      echo "Usage: $0 [N]"
+      echo "       COMMIT_RANGE='<commit range>' $0"
+      echo "       $0 -?"
+      echo "Checks unmerged commits, the previous N commits, or a commit range."
+      echo "COMMIT_RANGE='47ba2c3...ee50c9e' $0"
+      exit ${EXIT_CODE}
+    ;;
+  esac
+done
+
+if [ -z "${COMMIT_RANGE}" ]; then
+    if [ -n "$1" ]; then
+      COMMIT_RANGE="HEAD~$1...HEAD"
+    else
+      MERGE_BASE=$(git merge-base HEAD master)
+      COMMIT_RANGE="$MERGE_BASE..HEAD"
+    fi
+fi
+
+while IFS= read -r commit_hash  || [[ -n "$commit_hash" ]]; do
+    n_line=0
+    while IFS= read -r line || [[ -n "$line" ]]; do
+        n_line=$((n_line+1))
+        length=${#line}
+        if [ $n_line -eq 2 ] && [ $length -ne 0 ]; then
+            echo "The subject line of commit hash ${commit_hash} is followed by a non-empty line. Subject lines should always be followed by a blank line."
+            EXIT_CODE=1
+        fi
+    done < <(git log --format=%B -n 1 "$commit_hash")
+done < <(git log "${COMMIT_RANGE}" --format=%H)
+
+exit ${EXIT_CODE}