* Implement copy_datadir to allow easy copying of state from one node to another
* Instead of starting with a fresh datadir for MNs, reuse a copy of the faucet
* Start masternodes in parallel instead of waiting for the previous to finish
* Allow specifying of window and threshold with -bip9params
* Implement -dip3activationheight for regtests
* Implement fast DIP3 activation in DashTestFramework
* Speed up activation of DIP3 in dip3-deterministicmns.py
* Update qa/rpc-tests/test_framework/test_framework.py
Co-Authored-By: codablock <ablock84@gmail.com>
* Always assign fast_dip3_activation
* Fix off-by-1 in phase calculations
* Fix wait_for_quorum_phase, should look for check_received_messages
* Fix wait_for_quorum_phase for complain phase
* Bump default timeout in wait_for_quorum_phase/wait_for_quorum_commitment to 15
* Fix cleanup of old recovered sigs
When iterating the db, we should also include entries that match exactly
the end time.
* Fix key not found error
* Raise AssertionError in case wait_for_quorum_phase/wait_for_quorum_commitment time out
* Add `owneraddress` and `votingaddress` to json representation of provider txes and rpc output
* Rearrange/unify things a bit
* Add votingAddress to CSimplifiedMNListEntry json
* Use addresses in error messages too
* More unification
* Swap keyIDOwner/keyIDVoting with corresponding addresses in ToString()
* Drop keyIDOwner/keyIDVoting from json and rpc
* More unification: s/operatorRewardAddress/operatorPayoutAddress/
* More unification/cleanup: use specific name instead of just bitcoinAddress
* Fix dip3 test
* Announce blocks as HEADERS instead of INV in comptool
Announcing as INV results in one GETHEADERS message per INV item with
every GETHEADERS containing the same block locator info. This in turn
results in many (1088 in p2p-fullblocktests) replies with each having i+1
headers. As every message is sent in one go, the message processing queue
gets overloaded, leading to GETDATA timeouts for blocks and thus failing
the tests.
Announcing the blocks directly with HEADERS avoids all this and results in
one GETDATA per announced header.
This will later conflict with backported improvements from Bitcoin. When we
get to this point, we can simply ignore changes on Dash's side and take
the improvements from Bitcoin (which also switch to header announcement,
but after some refactorings)
* Give wait_for_pings more time
Large reorgs as in the p2p-fullblocktest can cause very long long delays
for the ping that we're waiting for. This was not a problem before #2593,
as before this wait_until was waiting forever.
* Send larger amounts for IX
* Don't use node0 as sender of IX transactions
node0 tends to have many small UTXOs which result in TXs with many inputs
and high CPU usage.
* Merge #9744: Remove unused module from rpc-tests
a432aa0 Remove unused module from rpc-tests (Takashi Mitsuta)
* Merge #9696: [trivial] Fix recently introduced typos in comments
0c9b9b7 [trivial] Fix recently introduced typos in comments (practicalswift)
* Merge #9657: Improve rpc-tests.py
a6a3e58 Various review markups for rpc-tests.py improvements (John Newbery)
3de3ccd Refactor rpc-tests.py (John Newbery)
afd38e7 Improve rpc-tests.py arguments (John Newbery)
91bffff Use argparse in rpc_tests.py (John Newbery)
1581ecb Use configparser in rpc-tests.py (John Newbery)
* Merge #9724: Qt/Intro: Add explanation of IBD process
f6d18f5 Qt/Intro: Explain a bit more what will happen first time (Luke Dashjr)
50c5657 Qt/Intro: Storage shouldn't grow significantly with pruning enabled (Luke Dashjr)
9adb694 Qt/Intro: Move sizeWarningLabel text into C++ code (Luke Dashjr)
* Merge #9794: Minor update to qrencode package builder
1bfe6b4 Use package name variable inside $(package)_file_name variable (Mitchell Cash)
* Merge #9726: netbase: Do not print an error on connection timeouts through proxy
3ddfe29 netbase: Do not print an error on connection timeouts through proxy (Wladimir J. van der Laan)
13f6085 netbase: Make InterruptibleRecv return an error code instead of bool (Wladimir J. van der Laan)
* Merge #9727: Remove fallbacks for boost_filesystem < v3
056aba2 Remove fallbacks for boost_filesystem < v3 (Wladimir J. van der Laan)
* Merge #9485: ZMQ example using python3 and asyncio
b471daf Adddress nits, use asyncio signal handling, create_task (Bob McElrath)
4bb7d1b Add python version checks and 3.4 example (Bob McElrath)
5406d51 Rewrite to not use Polling wrapper for asyncio, link to python2.7 example (Bob McElrath)
5ea5368 ZMQ example using python3 and asyncio (Bob McElrath)
* Merge #9807: RPC doc fix-ups.
851f6a3 [qa][doc] Correct rpc test options in readme (fanquake)
41e7219 [trivial] Add tests_config.ini to .gitignore (fanquake)
* Dashify
Co-Authored-By: PastaPastaPasta <pasta@dashboost.org>
* Change file permissions
* update travis.yml -parallel -> --jobs
* Increment mocktime before setting new SPORK_16_INSTANTSEND_AUTOLOCKS value
Otherwise nodes will not update sporks as they use the same timestamps.
* Disable autoix while filling mempool
* Retest autoix and regular ix after clearing mempool
* Speed up autoix-mempool tests by making the max mempool smaller
With this less TXs have to be created to fill up the mempool.
* Change DashTestFramework to use DIP3 MNs
* Don't assert disabled bip9 in p2p-autoinstantsend.py
* Replace IsDeterministicMNsSporkActive with IsDIP3Active
IsDIP3Active will now use a fixed parameter from consensus params.
Values for DIP0003Height/DIP0003Hash need to be updated when spork15
activates on mainnet.
Also enforce correct block hash on testnet/mainnet for DIP3 activation
block.
* Remove SPORK_15_DETERMINISTIC_MNS_ENABLED
* Replace all uses of IsDeterministicMNsSporkActive with IsDIP3Active
* Remove DIP3 upgrade-path tests and directly start with DIP3 enabled tests
* Make -masternodeprivkey non-mandatory
This code will vanish later.
* Add an option to use specific address as a source of funds in protx rpc commands
* fix typo "must"
* Always use payoutAddress (or operatorPayoutAddress) as a default if no fundAddress was specified
* make sure we actually selected some inputs
* fundAddress -> feeSourceAddress
* Align help text with new logic
* fix protx_update_service
* fix protx_revoke
* Add fRequireAllInputs to CCoinControl and use it in FundSpecialTx
This avoids adding all inputs even though they are not needed.
* Allow to specify empty operator payout address and simplify fee code in update_service
DIP3 tests were failing to call "protx update_service" as it did not accept
an empty "operatorPayoutAddress".
This also simplifies handling of the feeSourceAddr.
* Specify source for funds and fees in DIP3 tests
* Ensure EvoDB consistency by storing the best block hash
This approach is similar to the one used for chainstate currently.
Ensures that:
- nodes that upgraded after DIP3 has all the data processed correctly (they will crash and require reindex);
- evodb/ is removed when blocks/ is removed (otherwise sync will fail due to duplicate records).
* Implement CEvoDB::VerifyBestBlock/WriteBestBlock and call them from ConnectBlock/DisconnectBlock
* Fix walletbackup.py
* Implement creation and propagation of dummy contributions
These act as a ping which is broadcast a few blocks before the dummy
commitments are created. They are meant to determine online/offline members.
* Use information about received dummy contributions to determine validMembers
* Fix PoSe tests
* Fix dummy DKG phase progress in PoSe tests and give tests more time
Mine one block at a time until we reach the mining phase.
* Fix spork syncing issue in sporks tests
https://github.com/dashpay/dash/pull/2522 caused an issue with sporks syncing
in tests. The introduced time check in CMasternodeSync::ProcessTick causes
masternode sync to never start when mocktime is enabled, so this commit
disables mocktime for sporks.py.
Disabling mocktime however leads to fInitialDownload never becoming false
in CMasternodeSync::UpdatedBlockTip, so mnsync is never started. To fix
this, the tests now create a block before connecting the last node.
This however doesn't work because node1 will ignore the "getheaders" request
from node2 as it has not finished mnsync yet...so we also have to force
finish mnsync for node1.
* Also respond with getdata for announced sporks while in IBD
There was never a good reason to ignore spork announcements while in IBD.
At the same time, this poses the risk of missing out on sporks while in IBD.
This also fixes an issue in sporks testing, as nodes did not request for
announced sporks.
* Use wait_to_sync instead of custom loop
* Add SPORK_17_QUORUM_DKG_ENABLED spork
* Implement CDummyDKG and CDummyCommitment until we have the real DKG merged
This is only used on testnet/devnet/regtest and will NEVER be used on
mainnet. It is NOT SECURE AT ALL!
See comment in quorums_dummydkg.h for more details.
* Test simple PoSe in DIP3 tests
* Generate 2 instead of 4 blocks per iteration in PoSe tests
4 was based on old chainparams where I used larger phases.
* Only sleep when necessary in PoSe tests
* Fix typo in comment
* Give PoSe tests more time and sync after fast-forward
* Sleep in wait_for_instant_lock when TX is not known yet
We'll otherwise stress the CPU quite a lot, which might in turn result in
instant send timeouts.
* Wait for all nodes to have the instant send lock
Otherwise individual nodes might end up not being able to catch up,
especially when it's the last iteration and we generate 6 blocks after it.
* Use getrawtransaction in wait_for_instant_lock instead of gettransaction
gettransaction fails if the TX is not owned by the wallet
* Give instant send tests more time after DIP3 activation
Signature verification changes to BLS when DIP3 gets activated, which is
much more resource hungry. Give instant send tests more time after DIP3
activation until we do proper batched verification of instant send
signatures.
* Add LLMQ parameters to consensus params
* Add DIP6 quorum commitment special TX
* Implement CQuorumBlockProcessor which validates and handles commitments
* Add quorum commitments to new blocks
* Propagate QFCOMMITMENT messages to all nodes
* Allow special transactions in blocks which have no inputs/outputs
But only for TRANSACTION_QUORUM_COMMITMENT for now.
* Add quorum commitments to self-crafted blocks in DIP3 tests
* Add simple fork logic for current testnet
This should avoid a fork on the current testnet. It only applies to the
current chain which activated DIP3 at height 264000 and block
00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f.
When we revert the chain to retest the DIP3 deployment, this fork logic
can be removed again.
* Use quorumVvecHash instead of quorumHash to make null commitments unique
Implementation of https://github.com/dashpay/dips/pull/31
* Re-add quorum commitments after pruning mempool selected blocks
* Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements
Also add BEGIN/END markers for temporary code.
* Add comments/documentation to LLMQParams
* Move code which determines if a commitment is required into IsCommitmentRequired
This should make the code easier to read and also removes some duplication.
The also changes the error types that are possible from 3 to 2 now. Instead
of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is
only "bad-qc-not-allowed" now.
* Use new parameter from consensus parames for the temporary fork
* Revert "Restart MNs in DIP3 tests even if collateral has not moved (#2441)"
This reverts commit 153afb9062.
* Reuse old legacy MN key when upgrading to protx
These need to be restarted even in this case as keys are cycled when
upgrade_mn_protx is called. This resulted in invalid IX votes but was not
noticed because only 2 MNs were affected (still 8 of 10 votes succesful)
* Allow to reuse collaterals and addresses in ProRegTx
This also requires to move out the duplication check from CheckService to
the 2 individual ProTx check methods.
* Implement replacement logic for reused collaterals
* Add tests for new replacement logic
* no `-debug` by default (it's too heavy)
* drop useless `sync_masternodes` calls and add a couple where they could be actually usefull
* change autoix-mempool.py test logic:
1. use separate nodes to send test txes
2. sync nodes while filling the mempool
* Remove reference to now removed "protocolVersion"
* Allow to use non-DIP3 collaterals after DIP3 activation
This removes a rule which only made sense when we assumed all collaterals
would remain in DIP3 ProRegTx transactions after DIP3 activation.
As we allow to refer external collaterals now, this rule should vanish as
well.
* Sleep in case block time is ahead of real time
See comment. This was not a problem before as we had enough time passed
between the last block that caused this and the start-alias call.
Now we added another start-alias call which is directly after we generated
many blocks.
* Add BIP9 parameters for DIP3 deployment on testnet
* Remove autoix BIP9 deployment and reuse DIP3 deployment
* Add BIP9CheckMasternodesUpgraded to chain params
This controls if miners should check for upgraded masternodes first before
adding BIP9 bits to the block version. This only makes sense in network
where masternodes are up and running before BIP9 activation, which is not
necessarely the case in regtest and devnet.
Also refactor ComputeBlockVersion to use fCheckMasternodesUpgraded instead
of the inverse fAssumeMasternodeIsUpgraded. It is set to false by default
and only set to true in CreateNewBlock.
* Check for upgraded masternodes for DIP3 activation (only mainnet and testnet)
* Bump PROTOCOL_VERSION and DMN_PROTO_VERSION
We probably have nodes with 70211 already running on testnet.
Specify masternodeblsprivkey which is required in masternode mode now.
This should fix IS test failures which occur because of `Warning: You should specify a masternodeblsprivkey in the configuration. Please see documentation for help.` init error (there are other issues, so auto-IS test are still going to fail).
* Pass CCoinsView reference to special TX handling methods
* Allow referencing other TX outputs for ProRegTx collateral
* Remove "collateralAmount" from "protx register"
* Rename "protx register" to "protx fund_register"
* Remove UpdateSpork15Value from CDeterministicMNManager
Was not used/implemented anymore
* Lock masternode collaterals after chain/DIP3 is fully initialized
Otherwise detection of collaterals does not work.
* Implement new "protx register" RPC which uses existing collaterals
* Remove "masternode info" RPC
It is not consistent with other "masternode" RPCs anymore as it requires
the ProRegTx hash while all other RPCs work with the collateral.
* Load sporks from disk cache before initializing the chain
Otherwise spork15 is not loaded when we check it for the first time.
* Implement "protx info" RPC
* Use "protx info" instead of "masternode info" in DIP3 tests
* Test external collaterals for ProTx
* Handle review comments
* Don't pass CCoinView reference when it's not used
* Revert "Pass CCoinsView reference to special TX handling methods"
This reverts commit 28688724e1.
* Use GetUTXOCoin instead of now removed coinsView
Also remove collateral height check as GetUTXOCoin only returns confirmed
coins.
* Add conflict handling for external collaterals to mempool
* Handle review comments (squashed Github suggestions)
Co-Authored-By: codablock <ablock84@gmail.com>
* Remove nProtocolVersion fields from deterministic masternode lists
This field was part of my initial implementation from DIP3. One of the last
changes of DIP3 was then to remove this field, which I did not bring back
into code yet. This commit removes it now.
We use PROTOCOL_VERSION now in cases were compatibility in the the pre-DIP3
list is needed.
* Add type and mode fields in DIP3 special TXs
These were added to DIP3 but not in-code yet.
* Add DMN_PROTO_VERSION
