b75e83b298 merge bitcoin#24218: Fix implicit-integer-sign-change (Kittywhiskers Van Gogh)
8ecc22f51f merge bitcoin#23471: Improve ZMQ documentation (Kittywhiskers Van Gogh)
2965093c4a merge bitcoin#22079: Add support to listen on IPv6 addresses (Kittywhiskers Van Gogh)
3ac3714957 merge bitcoin#21310: fix sync-up by matching notification to generated block (Kittywhiskers Van Gogh)
7b0c725c59 merge bitcoin#21008: fix zmq test flakiness, improve speed (Kittywhiskers Van Gogh)
5e87efd04b merge bitcoin#20523: deduplicate 'sequence' publisher message creation/sending (Kittywhiskers Van Gogh)
99c730f0f3 merge bitcoin#20953: dedup zmq test setup code (node restart, topics subscription) (Kittywhiskers Van Gogh)
982c1f03d4 merge bitcoin#19572: Create "sequence" notifier, enabling client-side mempool tracking (Kittywhiskers Van Gogh)
b0b4e0fa7f zmq: Make `g_zmq_notification_interface` a smart pointer (Kittywhiskers Van Gogh)
0a1ffd30b9 zmq: extend appending address to log msg for Dash-specific notifications (Kittywhiskers Van Gogh)
Pull request description:
## Additional Information
* [bitcoin#19572](https://github.com/bitcoin/bitcoin/pull/19572) introduces tests in `interface_zmq.py` that validate newly introduced "sequence" reporting of all message types (`C`, `D`, `R` and `A`). The `R` message type (removed from mempool) is tested by leveraging the RBF mechanism, which isn't present in Dash.
In order to allow the tests to successfully pass, all fee bumping and RBF-specific code had to be removed from the tests. This test also involves creating a new block to test the `C` message (connected block) that would return a `time-too-new` error and fail unless mocktime has been disabled (which has been done in this test).
* When backporting [bitcoin#18309](https://github.com/bitcoin/bitcoin/pull/18309) ([dash#5728](https://github.com/dashpay/dash/pull/5728)), Dash-specific ZMQ notifications did not have those changes applied to them and that particular backport was merged upstream *after* [bitcoin#19572](https://github.com/bitcoin/bitcoin/pull/19572), meaning, for completion, the changes from [bitcoin#18309](https://github.com/bitcoin/bitcoin/pull/18309) have been integrated into [bitcoin#19572](https://github.com/bitcoin/bitcoin/pull/19572)'s backport.
As for the Dash-specific notifications, they have been covered to ensure uniformity in a separate commit.
* The ZMQ notification interface has been converted to a smart pointer in the interest of safety (this change is eventually done upstream in 8ed4ff8e05d61a8e954d72cebdc2e1d1ab24fb84 ([bitcoin#27125](https://github.com/bitcoin/bitcoin/pull/27125)))
## Breaking Changes
None expected.
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas **(note: N/A)**
- [x] I have added or updated relevant unit/integration/functional/e2e tests
- [x] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository code-owners and collaborators only)_
ACKs for top commit:
UdjinM6:
utACK b75e83b298
PastaPastaPasta:
utACK b75e83b298
knst:
utACK b75e83b298
Tree-SHA512: 9f860d1203bebe0914a5102f101f646873d14754830d651fb91ed0d1285a6c1a58ffc492b07d4768324d94f53171c9a4da974cf4a0b1e5c665979eace289f6f0
The flag fDIP0001ActiveAtTip shows a status of activation of DIP0001
This flag is used currently only in net.cpp for setup block buffer size.
Assume the bigger by default so far as DIP0001 is activated years ago
CGovernanceManager::IsValid() returns true only if its db is successfully
initialized. If we attempt to initialize it and fail, init logic will
report to us that it failed. If we don't attempt to initialize it at all,
it will remain false.
Since fDisableGovernance is the same as not initializing it at all and
the other case where IsValid() is false is dealt with in init, we can
use IsValid() to infer if governance is enabled.
The order in which they're loaded is dictated by the order in which they
are initialized. This also lets us get rid of that fast-fail because
governance db was always going to load before mncache db and replace it
with an assert.
Also, rename UpdateCachesAndClean to CheckAndRemove in CGovernanceManager
as CheckAndRemove is already an existing alias to UpdateCachesAndClean and
CheckAndRemove is associated with similar functionality in
C{NetFulfilledRequest, Spork}Manager
that's a result of:
contrib/devtools/copyright_header.py update ./
it is not scripted diff, because it works differentlly on my localhost and in CI:
CI doesn't want to use git commit date which is mocked to 30th Dec of 2023
## Issue being fixed or feature implemented
`ConnectBlock` can fail after `ProcessSpecialTxsInBlock`, we shouldn't
be notifying too early. Same for `DisconnectBlock` but that's less of an
issue imo.
## What was done?
Move notifications to the end of `ConnectBlock`/`DisconnectBlock`. There
is no `connman` in `CChainState` and I don't want to pass it in updates
struct so I changed `NotifyMasternodeListChanged` and used `connman`
from `CDSNotificationInterface` instead.
## How Has This Been Tested?
run unit test, run testnet qt wallet
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
Implementation EHF mechanism, part 4. Previous changes are:
- https://github.com/dashpay/dash/pull/4577
- https://github.com/dashpay/dash/pull/5505
- https://github.com/dashpay/dash/pull/5469
## Issue being fixed or feature implemented
Currently MN_RR is activated automatically by soft-fork activation after
v20 is activated.
It is not flexible enough, because platform may not be released by that
time yet or in opposite it can be too long to wait.
Also, any signal of EHF requires manual actions from MN owners to sign
EHF signal - it is automated here.
## What was done?
New spork `SPORK_24_MN_RR_READY`; new EHF manager that sign EHF signals
semi-automatically without manual actions; and send transaction with EHF
signal when signal is signed to network.
Updated rpc `getblockchaininfo` to return information about of EHF
activated forks.
Fixed function `IsTxSafeForMining` in chainlock's handler to skip
transactions without inputs (empty `vin`).
## How Has This Been Tested?
Run unit/functional tests. Some tests have been updated due to new way
of MN_RR activation: `feature_asset_locks.py`, `feature_mnehf.py`,
`feature_llmq_evo.py` and unit test `block_reward_reallocation_tests`.
## Breaking Changes
New way of MN_RR activation.
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
## Motivation
CoinJoin's subsystems are initialized by variables and managers that
occupy the global context. The _extent_ to which these subsystems
entrench themselves into the codebase is difficult to assess and moving
them out of the global context forces us to enumerate the subsystems in
the codebase that rely on CoinJoin logic and enumerate the order in
which components are initialized and destroyed.
Keeping this in mind, the scope of this pull request aims to:
* Reduce the amount of CoinJoin-specific entities present in the global
scope
* Make the remaining usage of these entities in the global scope
explicit and easily searchable
## Additional Information
* The initialization of `CCoinJoinClientQueueManager` is dependent on
blocks-only mode being disabled (which can be alternatively interpreted
as enabling the relay of transactions). The same applies to
`CBlockPolicyEstimator`, which `CCoinJoinClientQueueManager` depends.
Therefore, `CCoinJoinClientQueueManager` is only initialized if
transaction relaying is enabled and so is its scheduled maintenance
task. This can be found by looking at `init.cpp`
[here](93f8df1c31/src/init.cpp (L1681-L1683)),
[here](93f8df1c31/src/init.cpp (L2253-L2255))
and
[here](93f8df1c31/src/init.cpp (L2326-L2327)).
For this reason, `CBlockPolicyEstimator` is not a member of `CJContext`
and its usage is fulfilled by passing it as a reference when
initializing the scheduling task.
* `CJClientManager` has not used `CConnman` or `CTxMemPool` as `const`
as existing code that is outside the scope of this PR would cast away
constness, which would be unacceptable. Furthermore, some logical paths
are taken that will grind to a halt if they are stored as `const`.
Examples of such a call chains would be:
* `CJClientManager::DoMaintenance >
CCoinJoinClientManager::DoMaintenance > DoAutomaticDenominating >
CCoinJoinClientSession::DoAutomaticDenominating >
CCoinJoinClientSession::StartNewQueue > CConnman::AddPendingMasternode`
which modifies `CConnman::vPendingMasternodes`, which is non-const
behaviour
* `CJClientManager::DoMaintenance >
CCoinJoinClientManager::DoMaintenance > DoAutomaticDenominating >
CCoinJoin::IsCollateralValid > AcceptToMemoryPool` which adds a
transaction to the memory pool, which is non-const behaviour
* There were cppcheck [linter
failures](https://github.com/dashpay/dash/pull/5337#issuecomment-1685084688)
that seemed to be caused by the usage of `Assert` in
`coinjoin/client.h`. This seems to be resolved by backporting
[bitcoin#24714](https://github.com/bitcoin/bitcoin/pull/24714). (Thanks
@knst!)
* Depends on #5546
---------
Co-authored-by: Kittywhiskers Van Gogh <63189531+kittywhiskers@users.noreply.github.com>
Co-authored-by: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
## Issue being fixed or feature implemented
Many objects created and functions called by passing `const
std::unique_ptr<Obj>& obj` instead directly passing `Obj& obj`
In some cases it is indeed needed, but in most cases it is just extra
complexity that is better to avoid.
Motivation:
- providing reference to object instead `unique_ptr` is giving warranty
that there's no `nullptr` and no need to keep it in mind
- value inside unique_ptr by reference can be changed externally and
instead `nullptr` it can turn to real object later (or in opposite)
- code is shorter but cleaner
Based on that this refactoring is useful as it reduces mental load when
reading or writing code.
`std::unique` should be used ONLY for owning object, but not for passing
it everywhere.
## What was done?
Replaced most of usages `std::unique_ptr<Obj>& obj` to `Obj& obj`.
Btw, in several cases implementation assumes that object can be nullptr
and replacement to reference is not possible.
Even using raw pointer is not possible, because the empty
std::unique_ptr can be initialized later somewhere in code.
For example, in `src/init.cpp` there's called `PeerManager::make` and
pass unique_ptr to the `node.llmq_ctx` that would be initialized way
later.
That is out of scope this PR.
List of cases, where reference to `std::unique_ptr` stayed as they are:
- `std::unique_ptr<LLMQContext>& llmq_ctx` in `PeerManagerImpl`,
`PeerManager` and `CDSNotificationInterface`
- `std::unique_ptr<CDeterministicMNManager>& dmnman` in
`CDSNotificationInterface`
Also `CChainState` have 3 references to `unique_ptr` that can't be
replaced too:
- `std::unique_ptr<llmq::CChainLocksHandler>& m_clhandler;`
- `std::unique_ptr<llmq::CInstantSendManager>& m_isman;`
- `std::unique_ptr<llmq::CQuorumBlockProcessor>&
m_quorum_block_processor;`
## How Has This Been Tested?
Run unit/functional tests.
## Breaking Changes
No breaking changes, all of these changes - are internal APIs for Dash
Core developers only.
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
e57980b4738c10344baf136de3e050a3cb958ca5 [mempool] Remove NotifyEntryAdded and NotifyEntryRemoved callbacks (John Newbery)
2dd561f36124972d2364f941de9c3417c65f05b6 [validation] Remove pool member from ConnectTrace (John Newbery)
969b65f3f527631ede1a31c7855151e5c5d91f8f [validation] Remove NotifyEntryRemoved callback from ConnectTrace (John Newbery)
5613f9842b4000fed088b8cf7b99674c328d15e1 [validation] Remove conflictedTxs from PerBlockConnectTrace (John Newbery)
cdb893443cc16edf974f099b8485e04b3db1b1d7 [validation interface] Remove vtxConflicted from BlockConnected (John Newbery)
1168394d759b13af68acec6d5bfa04aaa24561f8 [wallet] Notify conflicted transactions in TransactionRemovedFromMempool (John Newbery)
Pull request description:
These boost signals were added in #9371, before we had a `TransactionRemovedFromMempool` method in the validation interface. The `NotifyEntryAdded` callback was used by validation to build a vector of conflicted transactions when connecting a block, which the wallet was notified of in the `BlockConnected` CValidationInterface callback.
Now that we have a `TransactionRemovedFromMempool` callback, we can fire that signal directly from the mempool for conflicted transactions.
Note that #9371 was implemented to ensure `-walletnotify` events were fired for these conflicted transaction. We inadvertently stopped sending these notifications in #16624 (Sep 2019 commit 7e89994). We should probably fix that, but in a different PR.
ACKs for top commit:
jonatack:
Re-ACK e57980b
ryanofsky:
Code review ACK e57980b4738c10344baf136de3e050a3cb958ca5, no code changes since previous review, but helpful new code comments have been added and the PR description is now more clear about where the old code came from
Tree-SHA512: 3bdbaf1ef2731e788462d4756e69c42a1efdcf168691ce1bbfdaa4b7b55ac3c5b1fd4ab7b90bcdec653703600501b4224d252cfc086aef28f9ce0da3b0563a69
<!--
*** Please remove the following help text before submitting: ***
Provide a general summary of your changes in the Title above
Pull requests without a rationale and clear improvement may be closed
immediately.
Please provide clear motivation for your patch and explain how it
improves
Dash Core user experience or Dash Core developer experience
significantly:
* Any test improvements or new tests that improve coverage are always
welcome.
* All other changes should have accompanying unit tests (see
`src/test/`) or
functional tests (see `test/`). Contributors should note which tests
cover
modified code. If no tests exist for a region of modified code, new
tests
should accompany the change.
* Bug fixes are most welcome when they come with steps to reproduce or
an
explanation of the potential issue as well as reasoning for the way the
bug
was fixed.
* Features are welcome, but might be rejected due to design or scope
issues.
If a feature is based on a lot of dependencies, contributors should
first
consider building the system outside of Dash Core, if possible.
-->
## Issue being fixed or feature implemented
<!--- Why is this change required? What problem does it solve? -->
<!--- If it fixes an open issue, please link to the issue here. -->
minimizing global uses
## What was done?
<!--- Describe your changes in detail -->
Started the deglobalization, a future PR should be done to continue this
deglobalization
## How Has This Been Tested?
<!--- Please describe in detail how you tested your changes. -->
<!--- Include details of your testing environment, and the tests you ran
to -->
<!--- see how your change affects other areas of the code, etc. -->
## Breaking Changes
<!--- Please describe any breaking changes your code introduces -->
none
## Checklist:
<!--- Go over all the following points, and put an `x` in all the boxes
that apply. -->
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* llmq: move initialization logic to 'LLMQContext', add unique pointer to NodeContext
* llmq: add aliases to LLMQ globals, expose them to RPC via LLMQContext
* rpc: replace most global invocations with LLMQContext aliases
* rpc: replace quorum RPC global invocations with LLMQContext aliases
* llmq: replace individual global member arguments with context pointer
* llmq: pass aliased context pointer instead of individual globals in tests
* llmq: move BLS worker to LLMQContext, remove global
* llmq: move DKG debug manager to LLMQContext, remove global
* llmq: move DKG session manager to LLMQContext, remove global
* llmq: move quorum share manager to LLMQContext, remove global
* llmq: move quorum signing manager to LLMQContext, remove global
* fix: move chain activation logic downward to succeed LLMQ initialization
* fix: change order of initialization to reflect dependency
* llmq: pass all global pointers invoked as CDSNotificationInterface arguments
* llmq: pass reference to quorumDKGDebugManager instead of invoking global
* llmq: pass reference to quorumBlockProcessor instead of invoking global
* llmq: pass reference to quorumDKGSessionManager instead of invoking global
* llmq: pass reference to quorumManager instead of invoking global
Co-authored-by: "UdjinM6 <UdjinM6@users.noreply.github.com>"
* llmq: pass reference to quorumSigSharesManager within CSigningManager and networking
* llmq: pass reference to quorumSigSharesManager instead of invoking global
* llmq: pass reference to chainLocksHandler instead of querying global
* llmq: pass reference to quorumInstantSendManager instead of querying global
* trivial: accept argument as const where possible
* style: remove an unneeded const_cast and instead pass by const reference
* style: use const where possible
Co-authored-by: pasta <pasta@dashboost.org>
* coinjoin: make CCoinJoinServer managed pointer, assign CConnman during init
* coinjoin: make CCoinJoinClientQueueManager managed pointer, assign CConnman during init
* sporks: move spork validation logic downwards after CConnman initialization
* sporks: make CSporkManager a pointer, reduce global invocations
* governance: make CGovernanceManager a pointer, reduce global invocations
* llmq: migrate LLMQ subsystem raw pointers to managed pointers
* masternode: make activeMasternodeManager a managed pointer
* masternode: make masternodeSync a managed pointer, assign CConnman during init
* refactor: make instantsend helper functions class members
* fix: send empty CDeterministicMNList if pointer isn't initialized yet
* fix: refactor governance object retrieval logic across node and ui
Update src/interfaces/node.cpp
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* use unique_ptr instead of shared
Signed-off-by: pasta <pasta@dashboost.org>
* unique_ptr over shared_ptr
Signed-off-by: pasta <pasta@dashboost.org>
* remove unneeded ptr
Signed-off-by: pasta <pasta@dashboost.org>
* Adjust IsTxSafeForMining checks
Signed-off-by: pasta <pasta@dashboost.org>
* use const ref
Signed-off-by: pasta <pasta@dashboost.org>
* add a todo
Signed-off-by: pasta <pasta@dashboost.org>
* use optional instead of magic max value
fixes a hypothetical bug where myIdx is not "initialized" (ie max), and we sleep forever
Signed-off-by: pasta <pasta@dashboost.org>
* simplify relay check
Signed-off-by: pasta <pasta@dashboost.org>
* use count_if instead of a loop
Signed-off-by: pasta <pasta@dashboost.org>
* add a few vector reserves
Signed-off-by: pasta <pasta@dashboost.org>
* instantsend: Use `NotifyEntryRemoved` signal instead of calling `CInstantSendManager::TransactionRemovedFromMempool` from `CTxMemPool::removeUnchecked` directly
Fixes potential mempool.cs vs cs_main (in RemoveConflictingLock) deadlock
* Apply suggestions from code review
yay, typso!
Co-authored-by: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
Co-authored-by: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
* instantsend: Resolve block conflicts first and take care of mempool ones later
* refactor: Rename RemoveChainLockConflictingLock -> RemoveConflictingLock
* instantsend: Handle transaction removal from mempool (for all reasons besides inclusion in blocks)
* instantsend: Remove old islocks with no known txes from db (once)
* refactor: Replace magic number with CURRENT_VERSION
* fix: Do not remove islocks for (yet) valid orphans
* Apply suggestions from code review
Co-authored-by: dustinface <35775977+xdustinface@users.noreply.github.com>
Co-authored-by: dustinface <35775977+xdustinface@users.noreply.github.com>
* Use single-threaded scheduler for IS, CL and Governance notifications
* Pass shared_ptr-s instead of objects themselves for CL, IS and Governance notifiers in CMainSignals/CValidatibnInterface
* llmq: Create shared_ptr for clsig at the root of its lifetime
* llmq: Create shared_ptr for islock clsig at the root of its lifetime
* llmq: Create shared_ptr for recSig at the root of its lifetime
Co-authored-by: xdustinface <xdustinfacex@gmail.com>
* Change litemode to disablegovernance, this makes it more clear what that flag actually does.
Signed-off-by: pasta <pasta@dashboost.org>
* more fLiteMode to fDisableGovernance
Signed-off-by: pasta <pasta@dashboost.org>
* handle -litemode being set
Signed-off-by: pasta <pasta@dashboost.org>
* enable privatesend by default in litemode
Signed-off-by: Pasta <pasta@dashboost.org>
* remove useless litemode check in CPrivateSendServer::ProcessMessage, must be MN, so must have litemode off already
Signed-off-by: Pasta <pasta@dashboost.org>
* change litemode to mean, doesn't validate governance, but has all other dash features
Signed-off-by: Pasta <pasta@dashboost.org>
* litemode must be off for MNs cont
Signed-off-by: Pasta <pasta@dashboost.org>
* change litemode help text
Signed-off-by: Pasta <pasta@dashboost.org>
* don't skip MN sync in litemode
Signed-off-by: Pasta <pasta@dashboost.org>
* drop fLiteMode in bitcoingui.cpp
Signed-off-by: Pasta <pasta@dashboost.org>
* skip governance sync in litemode
Signed-off-by: pasta <pasta@dashboost.org>
* remove fLiteMode in walletview.cpp
Signed-off-by: pasta <pasta@dashboost.org>
* add back
Signed-off-by: pasta <pasta@dashboost.org>
* fix comments
* fix cache loading
* fix scheduled tasks
* Fix help text for some rpcs (revert what's left of 3478)
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Introduce SynchronousUpdatedBlockTip signal
This version of UpdatedBlockTip mirrors the asynchronous behavior that we
had before the introduction of asynchronous signal handling.
* Fix tab spacing in validationinterface.cpp
* Invoke CDeterministicMNManager::UpdatedBlockTip from validation thread
It must be invoked synchronously as otherwise things become inconsistent.
* Call CActiveMasternodeManager::Init with block index
pindexNew in UpdatedBlockTip is not necessarily the current tip, so we
shouldn't rely on it in Init(). This is due to the async nature of the
UpdatedBlockTip invocation.
* scripted-diff: Replace #include "" with #include <> (ryanofsky)
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* scripted-diff: Replace #include "" with #include <> (Dash Specific)
-BEGIN VERIFY SCRIPT-
for f in \
src/bls/*.cpp \
src/bls/*.h \
src/evo/*.cpp \
src/evo/*.h \
src/governance/*.cpp \
src/governance/*.h \
src/llmq/*.cpp \
src/llmq/*.h \
src/masternode/*.cpp \
src/masternode/*.h \
src/privatesend/*.cpp \
src/privatesend/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* build: Remove -I for everything but project root
Remove -I from build system for everything but the project root,
and built-in dependencies.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/Makefile.test.include
* qt: refactor: Use absolute include paths in .ui files
* qt: refactor: Changes to make include paths absolute
This makes all include paths in the GUI absolute.
Many changes are involved as every single source file in
src/qt/ assumes to be able to use relative includes.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/qt/dash.cpp
# src/qt/optionsmodel.cpp
# src/qt/test/rpcnestedtests.cpp
* test: refactor: Use absolute include paths for test data files
* Recommend #include<> syntax in developer notes
* refactor: Include obj/build.h instead of build.h
* END BACKPORT #11651 Remove trailing whitespace causing travis failure
* fix backport 11651
Signed-off-by: Pasta <pasta@dashboost.org>
* More of 11651
* fix blockchain.cpp
Signed-off-by: pasta <pasta@dashboost.org>
* Add missing "qt/" in includes
* Add missing "test/" in includes
* Fix trailing whitespaces
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: MeshCollider <dobsonsa68@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
