Move funds from the coinbase, into the Asset Lock Pool. This is to incentivize MNs to upgrade to platform, because only MNs running platform will get these migrated rewards
## Issue being fixed or feature implemented
#5564 is a bit too optimistic about incoming triggers
## What was done?
Rework governance logic to only approve triggers that match our
expectations i.e. have the same data hash as our own trigger would have
if we would have to submit it.
## How Has This Been Tested?
Run tests
## Breaking Changes
Voting is done in `CreateGovernanceTrigger` only now meaning that it
only happens on next block for incoming triggers. Tweaked tests
accordingly.
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
## Issue being fixed or feature implemented
In case MNs didn't submit their own trigger, should vote for funding yes
when receiving triggers from other nodes.
## What was done?
Check if already submitted theirs and vote accordingly.
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
## What was done?
- remove dependency of Asset Lock txes on CCreditPool
- new case for functional tests of Asset Locks - more than one output
for Asset Lock tx.
## How Has This Been Tested?
Run unit/functional tests
## Breaking Changes
Slightly changes behaviour of TxMempool. Tx can be accepted in mempool
even if Asset Unlock transaction with same index is already mined. But
final consensus rules are same.
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone
0306d78cb49d1684cc96ba3512b582a1fdaf78cc Use getbalances in wallet_address_types tests (Jon Atack)
7eacdc5167c8db94df84e206db85817bc64e4921 Shift coverage from getunconfirmedbalance to getbalances in wallet_abandonconflict tests (Jon Atack)
3e6f7377f600e47e5e3d439fc5d6ccf3db210038 Improve getbalances coverage in wallet_balance tests (Jon Atack)
Pull request description:
<strike>This PR updates several tests and then removes the `getunconfirmedbalance` RPC which was deprecated in facfb4111d14a3b06c46690a2cca7ca91cea8a96 a year ago.
Next steps: remove the deprecated `getwalletinfo` fields and the `getbalance` RPC in follow-ups, if there seems to be consensus on those removals.</strike>
Update:
`getunconfirmedbalance` RPC was deprecated in facfb4111d14a3b06c46690a2cca7ca91cea8a96 a year ago, but following the review comments below, this PR now only updates the test coverage to use `getbalances` while still leaving basic coverage for `getunconfirmedbalance` in wallet_balance.py.
That said, I've seen 3 regular contributors confused in the past 10 days by "DEPRECATED" warnings in the code that are not following the deprecation policy in [JSON-RPC-interface.md#versioning](https://github.com/bitcoin/bitcoin/blob/master/doc/JSON-RPC-interface.md#versioning).
ISTM these warnings should either be removed, or the calls deprecated (`-deprecatedrpc`), or the policy updated to describe these warnings as a pre-deprecation practice.
ACKs for top commit:
jnewbery:
utACK 0306d78cb
Tree-SHA512: 692e43e9bed5afa97d905740666e365f0b64e559e1c75a6a398236d9e943894e3477947fc11324f420a6feaffa0c0c1532aa983c50090ca39d06551399e6ddd1
fa4632c41714dfaa699bacc6a947d72668a4deef test: Move boost/stdlib includes last (MarcoFalke)
fa488f131fd4f5bab0d01376c5a5013306f1abcd scripted-diff: Bump copyright headers (MarcoFalke)
fac5c373006a9e4bcbb56843bb85f1aca4d87599 scripted-diff: Sort test includes (MarcoFalke)
Pull request description:
When writing tests, often includes need to be added or removed. Currently the list of includes is not sorted, so developers that write tests and have `clang-format` installed will either have an unrelated change (sorting) included in their commit or they will have to manually undo the sort.
This pull preempts both issues by just sorting all includes in one commit.
Please be aware that this is **NOT** a change to policy to enforce clang-format or any other developer guideline or process. Developers are free to use whatever tool they want, see also #18651.
Edit: Also includes a commit to bump the copyright headers, so that the touched files don't need to be touched again for that.
ACKs for top commit:
practicalswift:
ACK fa4632c41714dfaa699bacc6a947d72668a4deef
jonatack:
ACK fa4632c41714dfaa, light review and sanity checks with gcc build and clang fuzz build
Tree-SHA512: 130a8d073a379ba556b1e64104d37c46b671425c0aef0ed725fd60156a95e8dc83fb6f0b5330b2f8152cf5daaf3983b4aca5e75812598f2626c39fd12b88b180
fa6c114ae604571435e8c4d25906a8b6d5b9984c test: Add sanitizer suppressions for AMD EPYC CPUs (MarcoFalke)
Pull request description:
Currently the ci system only runs on intel cpus (and some arm devices), but it won't run on CPUs `Using the 'shani(1way,2way)' SHA256 implementation` (excerpt from debug log).
For reference, google cloud CPUs (which is what Cirrus CI uses) print `Using the 'sse4(1way),sse41(4way),avx2(8way)' SHA256 implementation`
The traceback I got:
```
crypto/sha256_shani.cpp:87:18: runtime error: unsigned integer overflow: 0 - 1 cannot be represented in type 'size_t' (aka 'unsigned long')
#0 0x55c0000e95ec in sha256_shani::Transform(unsigned int*, unsigned char const*, unsigned long) /root/bitcoin/ci/scratch/build/bitcoin-x86_64-pc-linux-gnu/src/crypto/sha256_shani.cpp:87:18
#1 0x55bfffb926f8 in (anonymous namespace)::SelfTest() /root/bitcoin/ci/scratch/build/bitcoin-x86_64-pc-linux-gnu/src/crypto/sha256.cpp:517:9
#2 0x55bfffb906ed in SHA256AutoDetect[abi:cxx11]() /root/bitcoin/ci/scratch/build/bitcoin-x86_64-pc-linux-gnu/src/crypto/sha256.cpp:626:5
#3 0x55bfff87ab97 in BasicTestingSetup::BasicTestingSetup(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::vector<char const*, std::allocator<char const*> > const&) /root/bitcoin/ci/scratch/build/bitcoin-x86_64-pc-linux-gnu/src/test/util/setup_common.cpp:104:5
#4 0x55bffe885877 in main /root/bitcoin/ci/scratch/build/bitcoin-x86_64-pc-linux-gnu/src/qt/test/test_main.cpp:52:27
#5 0x7f20c3bf60b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)
#6 0x55bffe7a5f6d in _start (/root/bitcoin/ci/scratch/build/bitcoin-x86_64-pc-linux-gnu/src/qt/test/test_bitcoin-qt+0x1d00f6d)
SUMMARY: UndefinedBehaviorSanitizer: unsigned-integer-overflow crypto/sha256_shani.cpp:87:18 in
ACKs for top commit:
laanwj:
Anyhow ACK fa6c114ae604571435e8c4d25906a8b6d5b9984c
Tree-SHA512: 968a1d28eedec58c337b1323862f583cb1bcd78c5f03396940b9ab53ded12f8c6652877909aba05ee5586532137418fd817ff979bd7bef6e07856094f9d7f9b1
## Issue being fixed or feature implemented
Implementation of issue https://github.com/dashpay/dash-issues/issues/43
## What was done?
Masternode will try to create, sign and submit a Superblock (GovTrigger)
during the `nSuperblockMaturityWindow`.
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
590bda79e876d9b959083105b8c7c41dd87706eb scripted-diff: Remove setup_clean_chain if default is not changed (Fabian Jahr)
98892f39e3d079c73bff7f2a5d5420fa95270497 doc: Improve setup_clean_chain documentation (Fabian Jahr)
Pull request description:
The first commit improves documentation on setup_clean_chain which is misunderstood quite frequently. Most importantly it fixes the TestShell docs which are simply incorrect.
The second commit removes the instances of `setup_clean_clain` in functional tests where it is not changing the default.
This used to be part of #19168 which also sought to rename`setup_clean_chain`.
ACKs for top commit:
jonatack:
ACK 590bda79e876d9b959083105b8c7c41dd87706eb
Tree-SHA512: a7881186e65d31160b8f84107fb185973b37c6e50f190a85c6e2906a13a7472bb4efa9440bd37fe0a9ac5cd2d1e8559870a7e4380632d9a249eca8980b945f3e
e6fe1c37d0a2f8037996dd80619d6c23ec028729 rpc: Improve avoidpartialspends and avoid_reuse documentation (Fabian Jahr)
8f073076b102b77897e5a025ae555baae3d1f671 wallet: Increase OUTPUT_GROUP_MAX_ENTRIES to 100 (Fabian Jahr)
Pull request description:
Follow-up to #17824.
This increases OUTPUT_GROUP_MAX_ENTRIES to 100 which means that OutputGroups will now be up to 100 outputs large, up from previously 10. The main motivation for this change is that during the PR review club on #17824 [several participants signaled](https://bitcoincore.reviews/17824.html#l-339) that 100 might be a better value here.
I think fees should be manageable for users but more importantly, users should know what they can expect when using the wallet with this configuration, so I also tried to clarify the documentation on `-avoidpartialspends` and `avoid_reuse` a bit. If there are other additional ways how or docs where users can be made aware of the potential consequences of using these parameters, please let me know. Another small upside is that [there seem to be a high number of batching transactions with 100 and 200 inputs](https://miro.medium.com/max/3628/1*sZ5eaBSbsJsHx-J9iztq2g.png)([source](https://medium.com/@hasufly/an-analysis-of-batching-in-bitcoin-9bdf81a394e0)) giving these transactions a bit of a larger anonymity set, although that is probably a very weak argument.
ACKs for top commit:
jnewbery:
ACK e6fe1c37d0
Xekyo:
retACK e6fe1c37d0a2f8037996dd80619d6c23ec028729
rajarshimaitra:
tACK `e6fe1c3`
achow101:
ACK e6fe1c37d0a2f8037996dd80619d6c23ec028729
glozow:
code review ACK e6fe1c37d0
Tree-SHA512: 79685c58bafa64ed8303b0ecd616fce50fc9a2b758aa79833e4ad9f15760e09ab60c007bc16ab4cbc4222e644cfd154f1fa494b0f3a5d86faede7af33a6f2826
fad0ae6bb8e10b5cb82a5ec014e59b5aafc85b5e doc: Rename fuzz seed_dir to corpus_dir (MarcoFalke)
Pull request description:
The fuzz corpus directory might contain hand-crafted seeds, but generally it is a set of test inputs. See also https://github.com/google/fuzzing/blob/master/docs/glossary.md#corpus
ACKs for top commit:
practicalswift:
cr ACK fad0ae6bb8e10b5cb82a5ec014e59b5aafc85b5e: patch looks correct and "why not?" :)
fanquake:
ACK fad0ae6bb8e10b5cb82a5ec014e59b5aafc85b5e - did not test
Tree-SHA512: 38c952feb07aeeeb038b3261a12c824fab9ce5153d75f0ecf6d3f43db4f50998eeb2b14b11b7155f529189c93783fa2c11c81059021a04398c43f3505b31a2d4
ba7e17e073f833eccd4c7c111ae9058c3f123371 rpc, test: document {previous,next}blockhash as optional (Sebastian Falbesoner)
Pull request description:
This PR updates the result help of the following RPCs w.r.t. the `previousblockhash` and `nextblockhash` fields:
- getblockheader
- getblock
Also adds trivial tests on genesis block (should not contain "previousblockhash") and best block (should not contain "nextblockhash").
Top commit has no ACKs.
Tree-SHA512: ef42c5c773fc436e1b4a67be14e2532e800e1e30e45e54a57431c6abb714d2c069c70d40ea4012d549293b823a1973b3f569484b3273679683b28ed40abf46bb
c7437185589926ec8def2af6bede6a407b3d2e4a test: add further BIP37 size limit checks to p2p_filter.py (Sebastian Falbesoner)
Pull request description:
This is a follow-up PR to #18628. In addition to the hash-functions limit test introduced with commit fa4c29bc1d, it adds checks for the following size limits as defined in [BIP37](https://github.com/bitcoin/bips/blob/master/bip-0037.mediawiki):
ad message type `filterload`:
> The filter itself is simply a bit field of arbitrary byte-aligned size. The maximum size is **36,000 bytes**.
ad message type `filteradd`:
> The data field must be smaller than or equal to **520 bytes** in size (the maximum size of any potentially matched object).
Also introduces new constants for the limits (or reuses the max script size constant in case for the `filteradd` limit).
Also fixes#18711 by changing the misbehaviour check on "filteradd without filterset" (introduced with #18544) below to also use the more commonly used `assert_debug_log` method.
ACKs for top commit:
MarcoFalke:
ACK c7437185589926ec8def2af6bede6a407b3d2e4a
robot-visions:
ACK c7437185589926ec8def2af6bede6a407b3d2e4a
jonasschnelli:
utACK c7437185589926ec8def2af6bede6a407b3d2e4a. Seems to fix it: https://bitcoinbuilds.org/index.php?build=2524
Tree-SHA512: a03e7639263eb36a381922afb4e1d0ed2ae286f2ad2e7bbd922509a043ddf6cfd08747e01d54d29bfb8f54b66908f653974b9c347e4ca4f43332b586778893be
a9ecbdfcaa15499644d16e9c8ad2c63dfc45b37b test: add more inactive filter tests to p2p_filter.py (Sebastian Falbesoner)
5eae034996b340c19cebab9efb6c89d20fe051ef net: limit BIP37 filter lifespan (active between 'filterload' and 'filterclear') (Sebastian Falbesoner)
Pull request description:
This PR fixes https://github.com/bitcoin/bitcoin/issues/18483. On the master branch, there is currently _always_ a BIP37 filter set for every peer: if not a specific filter is set through a `filterload` message, a default match-everything filter is instanciated and pointed to via the `CBloomFilter` default constructor; that happens both initially, when the containing structure `TxRelay` is constructed:
c0b389b335/src/net.h (L812)
and after a loaded filter is removed again through a `filterclear` message:
c0b389b335/src/net_processing.cpp (L3201)
The behaviour was introduced by commit 37c6389c5a (an intentional covert fix for [CVE-2013-5700](https://github.com/bitcoin/bitcoin/pull/18515), according to gmaxwell).
This default match-everything filter leads to some unintended side-effects:
1. `getdata` request for filtered blocks (i.e. type `MSG_FILTERED_BLOCK`) are always responded to with `merkleblock`s, even if no filter was set by the peer, see issue #18483 (strictly speaking, this is a violation of BIP37) c0b389b335/src/net_processing.cpp (L1504-L1507)
2. if a peer sends a `filteradd` message without having loaded a filter via `filterload` before, the intended increasing of the banscore never happens (triggered if `bad` is set to true, a few lines below) c0b389b335/src/net_processing.cpp (L3182-L3186)
This PR basically activates the `else`-branch code paths for all checks of `pfilter` again (on the master branch, they are dead code) by limiting the pointer's lifespan: instead of always having a filter set, the `pfilter` is only pointing to a `CBloomFilter`-instance after receiving a `filterload` message and the instance is destroyed again (and the pointer nullified) after receiving a `filterclear` message.
Here is a before/after comparison in behaviour:
| code part / scenario | master branch | PR branch |
| --------------------------------------------- | ---------------------------------- | ---------------------------------------------------- |
| `getdata` processing for `MSG_FILTERED_BLOCK` | always responds with `merkleblock` | only responds if filter was set via `filterload` |
| `filteradd` processing, no filter was loaded | nothing | peer's banscore increases by 100 (i.e. disconnect) |
On the other code parts where `pfilter` is checked there is no change in the logic behaviour (except that `CBloomFilter::IsRelevantAndUpdate()` is unnecessarily called and immediately returned in the master branch).
Note that the default constructor of `CBloomFilter` is only used for deserializing the received `filterload` message and nowhere else. The PR also contains a functional test checking that sending `getdata` for filtered blocks is ignored by the node if no bloom filter is set.
ACKs for top commit:
MarcoFalke:
re-ACK a9ecbdfcaa, only change is in test code 🕙
Tree-SHA512: 1a656a6d74ccaf628e7fdca063ba63fbab2089e0b6d0a11be9bbd387c2ee6d3230706ff8ffc1a55711481df3d4547137dd7c9d9184d89eaa43ade4927792d0b6
cd543d9193ac1882c1b4a8a84e3ac7356a8b7ce9 test: check misbehavior more independently in p2p_filter.py (Danny Lee)
Pull request description:
This expands on #18672 in two ways:
- Check positive cases (`filterload` accepted, `filteradd` accepted) in addition to the negative cases added in #18672
- Address MarcoFalke 's [suggestion](https://github.com/bitcoin/bitcoin/pull/18672#discussion_r412101752) to successfully load a filter before testing `filteradd`
ACKs for top commit:
theStack:
re-ACK cd543d9193
Tree-SHA512: f82402f6287ccddf08b38b6432d5e2b2b2ef528802a981d04c24bac459022f732d9090d4849d72d3d1eb2c757161dcb18c4c036b6e11dc80114e9cd49f21c3bd
By design we can have more and more and more gaps in indexes list so far as
we can not re-sign expired transaction of asset-unlock. CRangesList is protected from this situation
## Issue being fixed or feature implemented
## What was done?
Renaming of all classes/variables/functions/rpcs from `hpmn` to `evo`.
## How Has This Been Tested?
All unit and func tests are passing.
Sync of Testnet.
## Breaking Changes
All protx RPCs ending with `_hpmn` were converted to `_evo`.
`_hpmn` RPCs are now deprecated.
Although, they can still be enabled by adding `-deprecatedrpc=hpmn`.
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
---------
Co-authored-by: thephez <thephez@users.noreply.github.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
## Issue being fixed or feature implemented
Execute command when the best chainlock changes (`%s` in cmd is replaced
by chainlocked block hash). Same as `-blocknotify` but for chainlocks.
Let `-instantsendnotify` replace `%w` with wallet name like
`-walletnotify` does.
## What was done?
## How Has This Been Tested?
run tests
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone
fab46b34f4b13abbb0af276c3fb548f25ccc28bd test: Fix restart node race (MarcoFalke)
Pull request description:
It is not allowed to start a node before it has been fully stopped. Otherwise it could lead to intermittent issues due to access issues (e.g. cookie file https://cirrus-ci.com/task/6409665024098304?command=ci#L4793)
Fix that by waiting for the node to fully stop.
ACKs for top commit:
laanwj:
code review ACK fab46b34f4b13abbb0af276c3fb548f25ccc28bd
Tree-SHA512: 7605cac0573a7b04f05ff110d0131e8940d87f7baf6d698505ed16b363d4d15b1e552c5ffd1a187c8fe5639f7e265c3122734c85283275746e46bd789614fd21
fab48da908f3f81135b9163edf5011d1e5f6ef6e test: Fix intermittent wallet_multiwallet issue with got_loading_error (MarcoFalke)
fa8e15f7b75e35846b86e8627a3612e31eb22dcb test: pep8 wallet_multiwallet.py (MarcoFalke)
Pull request description:
Failing the test after 10 iterations without a loading error is problematic because it may take 11 iterations to get a loading error.
Fix that by running until a loading error occurs, which should happen in almost all runs within the first 10 iterations.
ACKs for top commit:
ryanofsky:
Code review ACK fab48da908f3f81135b9163edf5011d1e5f6ef6e. This seems like a good workaround. I think more ideally think load and unload RPCs would not have racy status reporting (suggested previously https://github.com/bitcoin/bitcoin/pull/19300#pullrequestreview-435362710 and
Tree-SHA512: 6b80b26d916276efe2a01af93bca7dbf71a3e67db9d3deb15175070719bf7d1325a1410d93e74c0316942e388faa2ba185dc9d3759c82d1c73c3c509b9997f05
fa918dd537fea775c19a590e5f9161bf51a5839b test: Use Popen.wait instead of RPC in assert_start_raises_init_error (MarcoFalke)
Pull request description:
Using RPC (`wait_for_rpc_connection`) has several issue:
* It polls in a loop, which might be slow
* It tries to read the RPC cookie file, which might not be present, thus leading to intermittent issues
Fix both by using `Popen.wait`
ACKs for top commit:
laanwj:
Code review ACK ~~faf7b05be9c86ee61c39e5314511fe2410128a6b~~ fa918dd537fea775c19a590e5f9161bf51a5839b
darosior:
ACK fa918dd537fea775c19a590e5f9161bf51a5839b
Tree-SHA512: 5368ad0d0ea2deb0af9582a42667c9290efe8f2705f37a236afc2c7908b04265ab342e2dd356a57156e99389f4a27ab6da9fa7bf9161fb7568240aa005e693b9
## Issue being fixed or feature implemented
Bad naming is noticed in https://github.com/dashpay/dash/pull/5026 by
thephez
## What was done?
Renamed `assetLockedAmount` in CbTx to `creditPoolBalance`
Renamed also some local variables and functions to make it matched also.
## How Has This Been Tested?
Run functional/unit tests - succeed
Called python's rpc binding `node.getblock(block_hash)['cbTx']`:
Got this result:
```
{'version': 3, 'height': 1556, 'merkleRootMNList': '978b2b4d1b884de62799b9eaee75c7812fea59f98f80d5ff9c963b0f0f195e14', 'merkleRootQuorums': 'bc7a34eb114f4e4bf38a11080b5d8ac41bdb36dd41e17467bae23c94ba06b013', 'bestCLHeightDiff': 0, 'bestCLSignature': '000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000', 'creditPoolBalance': Decimal('7.00141421')}
```
## Breaking Changes
Renamed `assetLockedAmount` in CbTx to `creditPoolBalance`. @shumkov be
informed
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone
NOTE: There is slight difference with original backport due to future changes
in bitcoin#19272, bitcoin#19763 - otherwise functional test p2p_addr_relay.py fails
fa1da3d4bfc0511a89f5b19d5a4d89e55ff7ccde test: Add basic addr relay test (MarcoFalke)
fa1793c1c44a3f75a09f9c636467b8274c541bdd net: Pass connman const when relaying address (MarcoFalke)
fa47a0b003f53708b6d5df1ed4e7f8a7c68aa3ac net: Make addr relay mockable (MarcoFalke)
Pull request description:
As usual:
* Switch to std::chrono time to be type-safe and mockable
* Add basic test that relies on mocktime to add code coverage
ACKs for top commit:
naumenkogs:
utACK fa1da3d
promag:
ACK fa1da3d4bfc0511a89f5b19d5a4d89e55ff7ccde (fabe56e44b6f683e24e37246a7a8851190947cb3 before https://github.com/bitcoin/bitcoin/pull/18454#issuecomment-607866453), fa5bf23d527a450e72c2bf13d013e5393b664ca3 was dropped since last review.
Tree-SHA512: 0552bf8fcbe375baa3cab62acd8c23b2994efa47daff818ad1116d0ffaa0b9e520dc1bca2bbc68369b25584e85e54861fe6fd0968de4f503b95439c099df9bd7
fixup - see #19272, #19763
faede1b293354560317b67f0b4e6874dcac6ef41 test: Properly raise FailedToStartError when rpc shutdown before warmup finished (MarcoFalke)
Pull request description:
Should fix issues such as https://travis-ci.org/github/bitcoin/bitcoin/jobs/671910152#L7034
Top commit has no ACKs.
Tree-SHA512: ac659f29c5ec91985c916b734e24911cbf4e2c5c4b1f1891a7e6c2d2511ec285167550fb03848eee4a7a3cbc9f8cdb0c766f4e881d9e44368c7415d007006368
7a2ecf16df938dd95d3130a46082def7a02338eb Wallet: Change IsMine check in CWallet::DelAddressBook from assert to failure (Luke Dashjr)
2952c46b923042f2de801f319e03ed5c4c4eb735 Wallet: Replace CAddressBookData.name with GetLabel() method (Luke Dashjr)
d7092c392e10889cd7a080b3d22ed6446a59b87a QA: Test that change doesn't turn into non-change when spent in an avoid-reuse wallet (Luke Dashjr)
Pull request description:
Follow-up to #18192, not strictly necessary for 0.20
ACKs for top commit:
MarcoFalke:
re-ACK 7a2ecf16df, only change is adding an assert_equal in the test 🔰
jnewbery:
utACK 7a2ecf16df938dd95d3130a46082def7a02338eb
Tree-SHA512: e0933ee40f705b751697dc27249e1868ed4874254b174ebdd0a7150125d8c818402e66df2371718c7eeb90e67ee2317215fb260aa9b9d7b9b45ee436de2988ff
It's highly unlikely the test will ever deal with chains with >4500
blocks, so only the subset of the subsidy logic that is needed to
validate `gettxoutsetinfo` output has been included
## Issue being fixed or feature implemented
There's one type of output that potentially can be useful for bloom
filter.
It's follow-up for TODO for dashpay/dash#4857.
Asset Lock transactions have:
- standard inputs (covered by regular bloom filter implementation)
- standard outputs (covered by regular bloom filter implementation)
- special outputs that have public key to proof owing this credits on
platform and claiming it.
Asset Unlock transactions have:
- no inputs (no need bloom)
- standard outputs (covered by regular bloom filter implementation)
So far as there's only one special case, let's have this data in the
bloom filter because it can potentially help to show information such as
"Deposit to platform" on mobile clients.
## What was done?
- added special case for Asset Lock transactions for bloom filter
## How Has This Been Tested?
Run unit/functional tests. Doesn't actually tested how bloom filter
works.
## Breaking Changes
N/A
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
1e62350ca20898189904a88dfef9ea11ddcd8626 refactor: Improve use of explicit keyword (Fabian Jahr)
c502a6dbfb854ca827a5a3925394f9e09d29b898 lint: Use c++17 std in cppcheck linter (Fabian Jahr)
Pull request description:
I found the `extended-lint-cppcheck` linter still uses `std=c++11` when reviewing #20471. The only difference in the output after this change is one line is missing:
```
src/script/descriptor.cpp:159:5: warning: Struct 'PubkeyProvider' has a constructor with 1 argument that is not explicit. [noExplicitConstructor]
```
After some digging, I am still not sure why this one is ignored with c++17 when 40 other`noExplicitConstructor` warnings were still appearing.
In the second commit, I fix these warnings, adding `explicit` where appropriate and adding fixes to ignore otherwise.
ACKs for top commit:
practicalswift:
cr ACK 1e62350ca20898189904a88dfef9ea11ddcd8626: patch looks correct!
MarcoFalke:
review ACK 1e62350ca20898189904a88dfef9ea11ddcd8626
Tree-SHA512: dff7b324429a57160e217cf38d9ddbb6e70c6cb3d3e3e0bd4013d88e07afc2292c3df94d0acf7122e9d486322821682ecf15c8f2724a78667764c05d47f89a12
fa40168ab3102b9ad850f967a0e7fa22dbfbd0c6 Remove unused bits from service flags enum (MarcoFalke)
Pull request description:
Remove service bits that haven't been observed on the active network for years and won't ever be observed on the network with this meaning. Keeping this dead assignment in our source code forever doesn't add any value.
I somehow forgot to do this in commit fa0d0ff6e1bee60fde63724ae28a51aac5a94d4a.
ACKs for top commit:
laanwj:
Code review ACK fa40168ab3102b9ad850f967a0e7fa22dbfbd0c6
practicalswift:
cr ACK fa40168ab3102b9ad850f967a0e7fa22dbfbd0c6
fanquake:
ACK fa40168ab3102b9ad850f967a0e7fa22dbfbd0c6
Tree-SHA512: 376e5ac05940493cf2209fea60515c843e978c4b476f2524f6bf7a37a646d237c3ddcf6c0fa23641f9ba550f625609703d9b51b4be631a7f2a90e1092b557232
fa8abdc9953e381715493b259908e246914793b0 rpc: Use FeeModes doc helper in estimatesmartfee (MarcoFalke)
Pull request description:
Not sure why this doesn't use the doc helper, probably an oversight?
ACKs for top commit:
laanwj:
Code review ACK fa8abdc9953e381715493b259908e246914793b0
Tree-SHA512: 1f2dc8356e3476ddcf9cafafa7f9865ad95bed1e3067c0edab8e3c483e374bdbdbecc066167554b4a1b479e28f6a52c4ae6a75a70c67ee4e1ff4f3ba36b04001
## Issue being fixed or feature implemented
Since v19, Evo nodes are paid 4x blocks in a row.
This needs to be reverted when MN Reward Reallocation activates.
## What was done?
Starting from MN Reward Reallocation activation, Evo nodes are paid one
block in a row (like regular masternodes).
In addition, `nConsecutivePayments` isn't incremented anymore for Evo
nodes.
## How Has This Been Tested?
`feature_llmq_hpmn.py` with MN Reward Reallocation activation.
## Breaking Changes
no
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
---------
Co-authored-by: Konstantin Akimov <knstqq@gmail.com>
a6739cc86827759c543bf81f5532ec46e40549c3 rpc: Add specific error code for "wallet already loaded" (Wladimir J. van der Laan)
Pull request description:
Add a separate RPC error code for "wallet already loaded" to avoid having to match on message to detect this.
Requested by shesek for rust-bitcoinrpc.
If concept ACKed needs:
- [ ] Release note
- [x] A functional test (updated the existing test to make it pass, I think this is enough)
ACKs for top commit:
jonasschnelli:
Code Review ACK a6739cc86827759c543bf81f5532ec46e40549c3
promag:
Code review ACK a6739cc86827759c543bf81f5532ec46e40549c3.
Tree-SHA512: 9091872e6ea148aec733705d6af330f72a02f23b936b892ac28f9023da7430af6332418048adbee6014305b812316391812039e9180f7f3362d11f206c13b7d0
fa39c8a3e8f1090103468780d122a4cf4191bc13 test: Work around libFuzzer deadlock (MarcoFalke)
Pull request description:
Only required part is `symbolize=0`, but the other changes shouldn't hurt
ACKs for top commit:
practicalswift:
cr ACK fa39c8a3e8f1090103468780d122a4cf4191bc13: patch looks correct
Tree-SHA512: 9cddf1de46ad12aea9b8be2c1acb86ba0e07ffdb52f8155d943edf970955551c7cb049a3a6c027846b45dab0dc0966dec42999476ebde50aa761a08dbb751eae
bfa9309ad606102f24c9bd3c33dfe78949f09418 Use COINBASE_MATURITY constant in functional tests. (Kiminuo)
525448df9dc2ab6b7e960ff138956ae3e2efdf60 Move COINBASE_MATURITY from `feature_nulldummy` test to `blocktools`. (Kiminuo)
Pull request description:
`COINBASE_MATURITY` constant was added to `feature_nulldummy` test in #21373. This PR moves the constant to `blocktools.py` file and uses the constant in more tests as suggested [here](https://github.com/bitcoin/bitcoin/pull/21373#discussion_r605418462).
Edit: Goal of this PR is to replace integer constants with `COINBASE_MATURITY` but not necessarily in *all* cases because that would mean to read and fully understand all tests. That's out of my time constraints. Any reports where `COINBASE_MATURITY` should be used are welcome though!
ACKs for top commit:
theStack:
ACK bfa9309ad606102f24c9bd3c33dfe78949f09418 🌇
Tree-SHA512: 01f04645f05a39028681f355cf3d42dd63ea3303f76d93c430e0fdce441934358a2d847a54e6068d61932f1b75e1d406f51859b057b3e4b569f7083915cb317f
92e28fa8b2590cce0e8f0adadae80e46cb63a9ef test: remove unused constants in functional tests (Sebastian Falbesoner)
Pull request description:
This mini-PR gets rid of constants in functional tests that are not used anymore. Found by [vulture ](https://pypi.org/project/vulture/)via the following script that has been lying around here locally for quite some time (I think it was once proposed by practicalswift, but I don't remember the concrete topic/PR):
```
#!/bin/sh
for F in $(git ls-files -- "*.py"); do vulture "$F" | grep "unused variable"; done
```
ACKs for top commit:
practicalswift:
ACK 92e28fa8b2590cce0e8f0adadae80e46cb63a9ef: patch looks correct.
Tree-SHA512: 16516abc8014207bcefdf0545dffaecff1fbba66f45b54c02371dcfd1f18194855c6b72598c11b5407009561eafe8048d47af3471f0efb1795d52477d5a0232e
## Issue being fixed or feature implemented
Current implementation of MnEhfTx is not matched with DIP-0023, this PR
fixes it. It is a prior work for
https://github.com/dashpay/dash/pull/5469
## What was done?
- requestID is fixed from `clsig{quorumHeight}` to `mnhf{versionBit}` +
fixes for signature validation properly
- v20 is minimal height to accept MnEHF special transactions
- versionBit is not BLS version - removed unrelated wrong code and
validations
- TxMempool will accept MnEHF transaction even if inputs/outputs are
zeroes and no fee
- implemented python's serialization/deserialization of MnEHF
transactions for future using in functional tests
## How Has This Been Tested?
Run functional/unit tests. Beside that there's new functional test in
https://github.com/dashpay/dash/pull/5469 that actually test format of
transaction and signature validation - to be merged later.
## Breaking Changes
Payload of MnEhf tx is changed, related consensus rules are changed.
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone
89bdad5b25ae4ac03a486f729a5b58ae6f21946d RPC/Wallet: unloadwallet: Allow specifying wallet_name param matching RPC endpoint (Luke Dashjr)
Pull request description:
Allow specifying the `wallet_name` param to `unloadwallet` on RPC wallet endpoints, so long as it matches the endpoint wallet.
ACKs for top commit:
jonatack:
ACK 89bdad5b25ae4ac03a486f729a5b58ae6f21946d
MarcoFalke:
review ACK 89bdad5b25ae4ac03a486f729a5b58ae6f21946d
Tree-SHA512: efb399c33f7b5596870a26a8680f453ca47aa7a6db4e550f9435d13044f1c4bad0ae11e8f0205213409d08b75c4188c3be782e54aafab1f65b97eb8cf5c252a9
c92387232f750397da7d131f262c150a608408c2 refactor: Extract ParseOpCode from ParseScript (João Barbosa)
Pull request description:
Seems more natural to have `mapOpNames` "hidden" in `ParseOpCode` than in `ParseScript`.
A second lookup in `mapOpNames` is also removed.
ACKs for top commit:
laanwj:
ACK c92387232f750397da7d131f262c150a608408c2
theStack:
re-ACK c92387232f750397da7d131f262c150a608408c2
Tree-SHA512: d59d1964760622cf365479d44e3e676aa0bf46b60e77160140d967e012042df92121d3224c7551dc96eff5ff3294598cc6bade82adb3f60d28810e18e60e1257
## Issue being fixed or feature implemented
The logic for additional indexes is incomplete, handling of P2PK on
block disconnect is broken (luckily no one is using P2PK and reorgs are
rare) and there are a few other small issues that would be nice to have
fixed.
## What was done?
Pls see individual commits
## How Has This Been Tested?
Run `feature_dbcrash.py`, it should succeed (NOTE: it takes ~30 minutes
to complete, that's normal).
Run `feature_addressindex.py`, `feature_timestampindex.py` and
`feature_spentindex.py` (and other tests) should still succeed too.
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
8f5dc8800aeb524eee2fa2451cd22883b7b2bfec test: display command line options passed to send_cli() in debug log (Jon Atack)
Pull request description:
as per https://github.com/bitcoin/bitcoin/pull/18691#discussion_r411382589, and revert two cli calls changed in #18691 from rpc commands back to command line options (these were the only occurrences).
ACKs for top commit:
MarcoFalke:
ACK 8f5dc8800aeb524eee2fa2451cd22883b7b2bfec
Tree-SHA512: fcb3eca00aa4099066028c90d5e50a02e074366e09a17f5f5b937d9f7562dd054ff65681aa0ad4c94f6de1e98b1e2b9ac4cd084ddc297010253989a80483b1b9
## Issue being fixed or feature implemented
This is an implementation of DIP0027 "Credit Asset Locks".
It's a mechanism to fluidly exchange between Dash and credits.
## What was done?
This pull request includes:
- Asset Lock transaction
- Asset Unlock transaction (withdrawal)
- Credit Pool in coinbase
- Unit tests for Asset Lock/Unlock tx
- New functional test `feature_asset_locks.py`
RPC: currently locked amount (credit pool) is available through rpc call
`getblock`.
## How Has This Been Tested?
There added new unit tests for basic checks of transaction validity
(asset lock/unlock).
Also added new functional test "feature_asset_locks.py" that cover
typical cases, but not all corner cases yet.
## Breaking Changes
This feature should be activated as hard-fork because:
- It adds 2 new special transaction and one of them [asset unlock tx]
requires update consensus rulels
- It adds new data in coinbase tx (credit pool)
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**To release DIP 0027**
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
## Issue being fixed or feature implemented
V19 is active on mainnet/testnet now, no need to check activation bits
anymore. This PR also bumps `MinBIP9WarningHeight` to
post-v19-activation height which should stop `unknown new rules
activated (versionbit 8)` warning from appearing.
## What was done?
Bury v19, bump `MinBIP9WarningHeight`
## How Has This Been Tested?
Run tests, reindex on mainnet/testnet.
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
5aadd4be1883386a04bef6a04e9a1142601ef7a7 Convert amounts from float to decimal (Prayank)
Pull request description:
> decimal is preferred in accounting applications
https://docs.python.org/3.8/library/decimal.html
Decimal type saves an exact value so better than using float.
~~3 variables declared with type as 'Decimal' in [test/functional/mempool_accept.py](https://github.com/bitcoin/bitcoin/blob/master/test/functional/mempool_accept.py): fee, fee_expected, output_amount~~
~~Not required to convert to string anymore for using the above variables as decimal~~
+ fee, fee_expected, output_amount
~~+ 8 decimal places~~
+ Using value of coin['amount'] as decimal and removed 'int'
+ Removed unnecessary parentheses
+ Remove str() and use quotes
Fixes https://github.com/bitcoin/bitcoin/issues/20011
ACKs for top commit:
guggero:
ACK 5aadd4be1883386a04bef6a04e9a1142601ef7a7
Tree-SHA512: 5877cf3837e5b65bec0fc8909de141a720bfa02a747513e21d20f3c41ec0cfecc524d2c347a96596b0a1a97900da2acf08b799f26b11d537e4dcddc6ce45f38e
0956e46bff7f0b6da65a4de6d4f8261fe9d7055c test: use zero-argument super() shortcut (Python 3.0+) (Sebastian Falbesoner)
Pull request description:
This mini-PR replaces all calls to `super(...)` with arguments with the zero-argument shortcut `super()` where applicable. See [PEP 3135](https://www.python.org/dev/peps/pep-3135/#specification):
> The new syntax:
>
> super()
>
> is equivalent to:
>
> super(__class__, <firstarg>)
>
> where __class__ is the class that the method was defined in, and <firstarg> is
> the first parameter of the method (normally self for instance methods, and cls
> for class methods).
ACKs for top commit:
fanquake:
ACK 0956e46bff7f0b6da65a4de6d4f8261fe9d7055c
Tree-SHA512: 4ac66fe7ab2be2e8a514e5fcfc41dbb298f21b23ebb7b7b0310d704b0b3cef8adf287a8d80346d1ea9418998c597b4f0ff1f66148d0d806bb43db6607e0fe1cf
a2324e4d3f47f084b07a364c9a360a0bf31e86a0 test: Improve naming and logging of avoid_reuse tests (Fabian Jahr)
1abbdac6777bc5396d17a6772c8176a354730997 wallet: Prefer full destination groups in coin selection (Fabian Jahr)
Pull request description:
Fixes#17603 (together with #17843)
In the case of destination groups of >10 outputs existing in a wallet with `avoid_reuse` enabled, the grouping algorithm is adding left-over outputs as an "incomplete" group to the list of groups even when a full group has already been added. This leads to the strange behavior that if there are >10 outputs for a destination the transaction spending from that will effectively use `len(outputs) % 10` as inputs for that transaction.
From the original PR and the code comment I understand the correct behavior should be the usage of 10 outputs. I opted for minimal changes in the current code although there maybe optimizations possible for cases with >20 outputs on a destination this sounds like too much of an edge case right now.
ACKs for top commit:
jonatack:
Re-ACK a2324e4
achow101:
ACK a2324e4d3f47f084b07a364c9a360a0bf31e86a0
kallewoof:
ACK a2324e4d3f47f084b07a364c9a360a0bf31e86a0
meshcollider:
Tested ACK a2324e4d3f47f084b07a364c9a360a0bf31e86a0 (verified the new test fails on master without this change)
Tree-SHA512: 4743779c5d469fcd16df5baf166024b1d3c8eaca151df1e8281b71df62b29541cf7bfee3f8ab48d83e3b34c9256e53fd38a7b146a54c79f9caa44cce3636971a
25dac9fa65243ca8db02df22f484039c08114401 doc: add release notes for explicit fee estimators and bumpfee change (Karl-Johan Alm)
05227a35545d7656450874b3668bf418c73813fb tests for bumpfee / estimate_modes (Karl-Johan Alm)
3404c1b753432c4859a4ca245f01c240610a00cb policy: optional FeeEstimateMode param to CFeeRate::ToString (Karl-Johan Alm)
6fcf4484302d13bd7739b617470d8c8e31974908 rpc/wallet: add two explicit modes to estimate_mode (Karl-Johan Alm)
b188d80c2de9ebb114da5ceea78baa46bde7dff6 MOVEONLY: Make FeeEstimateMode available to CFeeRate (Karl-Johan Alm)
5d1a411eb12fc700804ffe5d6e205234d30edd5f fees: add FeeModes doc helper function (Karl-Johan Alm)
91f6d2bc8ff4d4cd1b86daa370ec9d2d9662394d rpc/wallet: add conf_target as alias to confTarget in bumpfee (Karl-Johan Alm)
69158b41fc488e4f220559da17a475eff5923a95 added CURRENCY_ATOM to express minimum indivisible unit (Karl-Johan Alm)
Pull request description:
This lets users pick their own fees when using `sendtoaddress`/`sendmany` if they prefer this over the estimators.
ACKs for top commit:
Sjors:
re-utACK 25dac9fa65: rebased, more fancy C++,
jonatack:
ACK 25dac9fa65243ca8db02df2 I think this should be merged after all this time, even though it looks to me like there are needed follow-ups, fixes and test coverage to be added (see further down), which I don't mind helping out with, if wanted.
fjahr:
Code review ACK 25dac9fa65243ca8db02df22f484039c08114401
Tree-SHA512: f31177e6cabf3187a43cdfe93477144f8e8385c7344613743cbbd16e8490d53ff5144aec7b9de6c9a65eb855b55e0f99d7f164dee4b6bf3cfea4dce51cf11d33
## Issue being fixed or feature implemented
Implementation of Randomness Beacon Part 3.
Starting from v20 activation fork, members for quorums are sorted using
(if available) the best CL signature found in Coinbase.
If no CL signature is present yet, then the usual way is used (By using
Blockhash instead)
The actual new way to shuffle is already implemented in
https://github.com/dashpay/dash/pull/5366.
SPV clients also need to calculate members, but they only know block
headers.
Since Coinbase is in the actual block, then they lack the required
information to correctly calculate quorum members.
## What was done?
- Message `MNLISTIDFF` is enriched with a new field `quorumsCLSigs`.
This field holds the Chainlock Signature required for each set of
indexes corresponding to quorums in field `newQuorums`.
- Protocol version has been bumped to `70230`.
- Clients with protocol version greater or equal to `70230` will receive
the new field `quorumsCLSigs`.
- The same field is returned in `protx diff` RPC.
Note:
- Field `quorumsCLSigs` will populated only after v20 activation
- If for one or more quorums, no non-null CL sig was found in CbTx then
a null signature is returned in `quorumsCLSigs`.
## How Has This Been Tested?
- Functional test mininode's protocol version was bumped to `70230`.
- `feature_llmq_rotation.py` checks that `quorumsCLSigs` match in both
P2P and RPC messages.
## Breaking Changes
No
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
---------
Co-authored-by: thephez <thephez@users.noreply.github.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: pasta <pasta@dashboost.org>
## Issue being fixed or feature implemented
It splits from https://github.com/dashpay/dash/pull/5150/ by
@PastaPastaPasta request.
## What was done?
See commits
## How Has This Been Tested?
Run unit/functional tests
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone
b1f59d55d920d2b35269b474762f94fec87bfb16 RPC/Wallet: unloadwallet: Clarify docs/error when both the RPC endpoint and wallet_name parameter specify a wallet (Luke Dashjr)
Pull request description:
Just documentation clarifications from #20448
ACKs for top commit:
MarcoFalke:
review ACK b1f59d55d920d2b35269b474762f94fec87bfb16
jonatack:
re-ACK b1f59d55d920d2b35269b474762f94fec87bfb16 per `git diff e8303a0 b1f59d5`
Tree-SHA512: ac068b0aa7ceed49496367fdd9425b59dbba18b56e89b26afc22a6c8ece51f0b92a169cacd55740b1cadab2b32f4f8e8700e609066ab7e59d3b53c7891da585e
## Issue being fixed or feature implemented
Allow generating 12, 18, 24 words mnemonics. Default to 12 words as it's
the most popular option/de-facto a standard now imo.
## What was done?
Add `-mnemonicbits` option, add tests
## How Has This Been Tested?
run tests, play with wallets on regtest
## Breaking Changes
n/a, old wallets should not be affected
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
## Issue being fixed or feature implemented
Given the hard fork that happened on testnet, there is now lots of the
transactions that were made on the fork that is no longer valid. Some
transactions could be relayed and mined again but some like coinjoin
mixing won't be relayed because of 0 fee and transactions spending
coinbases from the forked branch are no longer valid at all.
## What was done?
Introduce `wipewallettxes` RPC and `wipetxes` command for `dash-wallet`
tool to be able to get rid of some/all txes in the wallet.
## How Has This Been Tested?
run tests, use rpc/command on testnet wallet
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
## Issue being fixed or feature implemented
Version field should always be the first field of a message for better
readibility.
## What was done?
- Introduced new protocol version `MNLISTDIFF_VERSION_ORDER` (`70229`).
- `nVersion` serialisation order is changed for clients with protocol
version greater than or equal to `70229`.
- For clients with protocol version >= `70225` and < `70229` the old
order is used: can be deprecated in the future.
- Increased functional test P2P mininode's protocol version to `70229`.
## How Has This Been Tested?
`feature_llmq_rotation.py` with new protocol version.
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
## Issue being fixed or feature implemented
Disabled or non-enforced Chainlocks does not mean you can safely mine
non-locked txes, you could end up mining a block that is going to be
rejected by everyone else if a conflicting tx (missing on your node)
would be IS-locked. I can't find any reason why we have this besides "if
Chainlocks are disabled then smth is wrong so let them all be mined" but
we have spork_2 and spork_3 to control IS behaviour and we check them in
`IsTxSafeForMining` already, that would be a much more straightforward
way to deal with a potential issue.
Noticed this while reviewing #5150 and also while testing v19.2 during
recent testnet v19 re-fork.
## What was done?
Drop this check, adjust tests
## How Has This Been Tested?
Run tests locally
## Breaking Changes
Not quote breaking changes but a change in behaviour: with CLs disabled
it will now take 10 minutes for non-locked txes to be mined, same as
when CLs are enabled.
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
## Issue being fixed or feature implemented
Mobile wallets would have to convert 4k+ pubkeys at the V19 fork point
and it's a pretty hard job for them that can easily take 10-15 seconds
if not more. Also after the HF, if a masternode list is requested from
before the HF, the operator keys come in basic scheme, but the
merkelroot was calculated with legacy. From mobile team work it wasn't
possible to convert all operator keys to legacy and then calculate the
correct merkleroot.
~This PR builds on top of ~#5392~ #5403 (changes that belong to this PR:
26f7e966500bdea4c604f1d16716b40b366fc707 and
4b42dc8fcee3354afd82ce7e3a72ebe1659f5f22) and aims to solve both of
these issues.~
cc @hashengineering @QuantumExplorer
## What was done?
Introduce `nVersion` on p2p level for every CSimplifiedMNListEntry. Set
`nVersion` to the same value we have it in CDeterministicMNState i.e.
pubkey serialization would not be via basic scheme only after the V19
fork, it would match the way it’s serialized on-chain/in
CDeterministicMNState for that specific MN.
## How Has This Been Tested?
run tests
## Breaking Changes
NOTE: `testnet` is going to re-fork at v19 forkpoint because
`merkleRootMNList` is not going to match
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [ ] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
451b96f7d2796d00eabaec56d831f9e9b1a569cc test: kill process group to avoid dangling processes (S3RK)
Pull request description:
This is an alternative to #19281
This PR fixes a problem when after test failure with `--failfast` option there could be dangling nodes. The nodes will continue to occupy rpc/p2p ports on the machine and will cause further test failures.
If there are any dangling nodes left at the end of the test run we kill the whole process group.
Pros: the operations is immediate and won't lead to CI timeout
Cons: the test_runner process is also killed and exit code is 137
Example output:
```
...
Early exiting after test failure
TEST | STATUS | DURATION
rpc_decodescript.py | ✓ Passed | 2 s
rpc_deprecated.py | ✓ Passed | 2 s
rpc_deriveaddresses.py | ✓ Passed | 2 s
rpc_dumptxoutset.py | ✖ Failed | 2 s
ALL | ✖ Failed | 8 s (accumulated)
Runtime: 4 s
Killed: 9
> echo $?
137
```
ACKs for top commit:
MarcoFalke:
review ACK 451b96f7d2796d00eabaec56d831f9e9b1a569cc
aitorjs:
ACK 451b96f7d2796d00eabaec56d831f9e9b1a569cc. Manual testing with and without **--failfast**.
Tree-SHA512: 87e510a1411b9e7571e63cf7ffc8b9a8935daf9112ffc0f069d6c406ba87743ec439808181f7e13cb97bb200fad528589786c47f0b43cf3a2ef0d06a23cb86dd
fa92af5af39a08982f785542df5419d6d5a4706d ci: Run feature_block and feature_abortnode in valgrind (MarcoFalke)
fa01febeaf801bade77a613e64f18b556ae16d86 test: Remove ci timeout restriction in test_runner (MarcoFalke)
Pull request description:
Also revert commit 0a4912e46a, because some tests take too long for this to be useful anymore.
Top commit has no ACKs.
Tree-SHA512: 363f14766e1f4a5860ab668a516b41acebc6fbdf11d8defb3a95a772dbf82304ca1f5f14b1dbad97f2029503e03d92e8c69df0466a8872409c20665838f617ed
4444edc2e6671d3f73de3725447130f73ecf0375 ci: Enable all functional tests in valgrind (MarcoFalke)
Pull request description:
The travis timeout for our repo has been bumped to 2h, so we can run all tests in valgrind now
ACKs for top commit:
practicalswift:
ACK 4444edc2e6671d3f73de3725447130f73ecf0375 -- regarding the three disabled cases (`feature_abortnode`, `feature_block` and `rpc_bind`): not a big deal since MSan will take care of those once #18288 is merged. More is more :)
Tree-SHA512: ea2f798112911b6d1f3d88cfcdf0a7cdb698687248343703d6fe55da144542c961c15d888bffb41672c10aa76765615cb7c7ff93d468bfad3c51f962f24e7abb
## Issue being fixed or feature implemented
same as #5392, alternative solution
~based on #5402 atm, will rebase later~
## What was done?
pls see individual commits
## How Has This Been Tested?
reorg mainnet around forkpoint with a patched client (to allow low
difficulty), run tests
## Breaking Changes
Another evodb migration is required. Going back to an older version or
migrating after the fork requires reindexing.
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
1ef28b4f7cfba410fef524def1dac24bbc4086ca Make AnalyzePSBT next role calculation simple, correct (Gregory Sanders)
Pull request description:
Sniped test and alternative to https://github.com/bitcoin/bitcoin/pull/18220
Sjors documenting the issue:
```
A PSBT signed by ColdCard was analyzed as follows (see #17509 (comment))
{
"inputs": [
{
"has_utxo": true,
"is_final": false,
"next": "finalizer"
}
],
"estimated_vsize": 141,
"estimated_feerate": 1e-05,
"fee": 1.41e-06,
"next": "signer"
}
I changed AnalyzePSBT so that it returns "next": "finalizer" instead.
```
It makes it much clearer that the role has been decided before hitting the `calc_fee` block, and groups all state-deciding in one spot instead of 2.
Note that this assumes that PSBT roles are a complete ordering, which for now and in the future seems to be a correct assumption.
ACKs for top commit:
Sjors:
ACK 1ef28b4f7cfba410fef524def1dac24bbc4086ca, much nicer. Don't forget to document the bug fix.
achow101:
ACK 1ef28b4f7cfba410fef524def1dac24bbc4086ca
Empact:
ACK 1ef28b4f7c
Tree-SHA512: 22ba4234985c6f9c1445b14565c71268cfaa121c4ef000ee3d5117212b09442dee8d46d9701bceddaf355263fe25dfe40def2ef614d4f2fe66c9ce876cb49934
ffff9dcdc3cbe427739cc19cc7a53f032474fa2a test: Explain why test logging should be used (MarcoFalke)
Pull request description:
Background is that some tests don't have any `self.log` call at all. Thus there are no "anchor points" and those tests are hard to debug because the logs can't easily be parsed by a human.
ACKs for top commit:
jonatack:
ACK ffff9dcdc3cbe427739cc19cc7a53f032474fa2a
instagibbs:
ACK ffff9dcdc3
fanquake:
re-ACK ffff9dcdc3cbe427739cc19cc7a53f032474fa2a
Tree-SHA512: 08d962e85c4892c2a0c58feb5dc697c680a9d68e41a79417da6fcd415e0c5c735c4533a985cf225bb89deb5ca717d9bedf990657958079185804caa512b10f5a
d3bc18408146e91b3836f72360ff6fa2420b6887 doc: update release notes with getaddressinfo label deprecation (Jon Atack)
72af93f36479dc12d795f1d05fa3d8fbd9b293bd test: getaddressinfo label deprecation test (Jon Atack)
d48875fa20d0b71b978cb3d1f85dd9ec14e664cc rpc: deprecate getaddressinfo label field (Jon Atack)
dc0cabeda49a7edbfa71df22846721b6f6224aea test: remove getaddressinfo label tests (Jon Atack)
c7654af6f830577a54df12b5d65df93532db0dc2 doc: address pr17578 review feedback (Jon Atack)
Pull request description:
This PR builds on #17578 (now merged) and deprecates the rpc getaddressinfo `label` field. The deprecated behavior can be re-enabled by starting bitcoind with `-deprecatedrpc=label`.
See http://www.erisian.com.au/bitcoin-core-dev/log-2019-11-22.html#l-622 and https://github.com/bitcoin/bitcoin/pull/17283#issuecomment-554458001 for more context.
Reviewers: This PR may be tested manually by building, then running bitcoind with and without the `-deprecatedrpc=label` flag while verifying the rpc getaddressinfo output and help text.
Next step: add support for multiple labels.
ACKs for top commit:
jnewbery:
ACK d3bc18408146e91b3836f72360ff6fa2420b6887
laanwj:
ACK d3bc18408146e91b3836f72360ff6fa2420b6887
meshcollider:
utACK d3bc18408146e91b3836f72360ff6fa2420b6887
Tree-SHA512: f954402884ec54977def332c8160fd892f289b0d2aee1e91fed9ac3220f7e5b1f7fc6421b84cc7a5c824a0582eca4e6fc194e4e33ddd378c733c8941ac45f56d
## Issue being fixed or feature implemented
fix a couple of issues in helpers, extend feature_dip3_v19.py to check
more after v19 fork
## What was done?
pls see individual PRs
## How Has This Been Tested?
run tests
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
## Issue being fixed or feature implemented
Currently, Chainlocks are either enabled or disabled. This PR adds a
third state: enabled but we will not sign new ones.
Should probably backport this to v19.x
## What was done?
Spork state != 0 but active will now result in chain locks being
enforced but not created.
## How Has This Been Tested?
## Breaking Changes
None
## Checklist:
_Go over all the following points, and put an `x` in all the boxes that
apply._
- [ ] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
0ed2d8e07d3806d78d03a77d2153f22f9d733a07 test: add BIP37 remote crash bug [CVE-2013-5700] test to p2p_filter.py (Sebastian Falbesoner)
Pull request description:
Integrates the missing message type `filteradd` to the test framework and checks that the BIP37 implementation is not vulnerable to the "remote crash bug" [CVE-2013-5700](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2013-5700) anymore. Prior to v.0.8.4, it was possible to trigger a division-by-zero error on the following line in the function `CBloomFilter::Hash()`:
f0d6487e29/src/bloom.cpp (L45)
By setting a zero-length filter via `filterload`, `vData.size()` is 0, so the modulo operation above, called on any .insert() or .contains() operation then crashed the node. The test uses the approach of just sending an arbitrary `filteradd` message after, which calls `CBloomFilter::insert()` (and in turn `CBloomFilter::Hash()`) on the node. The vulnerability was fixed by commit 37c6389c5a (an intentional covert fix, [according to gmaxwell](https://github.com/bitcoin/bitcoin/issues/18483#issuecomment-608224095)), which introduced flags `isEmpty`/`isFull` that wouldn't call the `Hash()` member function if `isFull` is true (set to true by default constructor).
To validate that the test fails if the implementation is vulnerable, one can simply set the flags to false in the member function `UpdateEmptyFull()` (that is called after a filter received via `filterload` is constructed), which activates the vulnerable code path calling `Hash` in any case on adding or testing for data in the filter:
```diff
diff --git a/src/bloom.cpp b/src/bloom.cpp
index bd6069b..ef294a3 100644
--- a/src/bloom.cpp
+++ b/src/bloom.cpp
@@ -199,8 +199,8 @@ void CBloomFilter::UpdateEmptyFull()
full &= vData[i] == 0xff;
empty &= vData[i] == 0;
}
- isFull = full;
- isEmpty = empty;
+ isFull = false;
+ isEmpty = false;
}
```
Resulting in:
```
$ ./p2p_filter.py
[...]
2020-04-03T14:38:59.593000Z TestFramework (INFO): Check that division-by-zero remote crash bug [CVE-2013-5700] is fixed
2020-04-03T14:38:59.695000Z TestFramework (ERROR): Assertion failed
[...]
[... some exceptions following ...]
```
ACKs for top commit:
naumenkogs:
utACK 0ed2d8e07d3806d78d03a77d2153f22f9d733a07
Tree-SHA512: 02d0253d13eab70c4bd007b0750c56a5a92d05d419d53033523eeb3ed80318bc95196ab90f7745ea3ac9ebae7caee3adbf2a055a40a4124e0915226e49018fe8
4670006762ffce654bb12edb5a7e64ad004122a7 test: remove redundant sync_with_ping after add_p2p_connection (Jon Atack)
Pull request description:
Now that #18247 is merged, these calls are redundant.
ACKs for top commit:
vasild:
utACK 4670006
Tree-SHA512: bdbfe8bcf9dbdde0a8115e3a62bfe359910798d7a3010d920ffca07049cb5f97bf8fb9b6f70079b0607105192b61a6d665774e59a2b678597b47ad6237595ad5
6112a209828c43930f677c45461339cdf68a56e9 test: replace (send_message + sync_with_ping) with send_and_ping (Jon Atack)
Pull request description:
This is a follow-up to faf1d047313e71658fb31f6b94fdd5d37705ab85 yesterday.
ACKs for top commit:
vasild:
utACK 6112a20
MarcoFalke:
ACK 6112a209828c43930f677c45461339cdf68a56e9 🎞
Tree-SHA512: 749644ac9a1ef0e1aa6c3ac5e899eb3fa7fb9c0909352f922a80412df2bc0e539692a7757af550eff4d4914cbe57b0c75ce3948f569acc7a52852e91a55ad457
00559229588feb19de2a0cb7506f70c483a1f433 test: add BIP37 'filterclear' test to p2p_filter.py (Sebastian Falbesoner)
Pull request description:
Integrates the message type `filterclear` to the test framework and adds a simple test to `p2p_filter.py`, checking that arbitrary txs get relayed again after deleting the filter.
ACKs for top commit:
naumenkogs:
utACK 00559229588feb19de2a0cb7506f70c483a1f433
Tree-SHA512: fe64e99a526865770707d8077b9968d3923f248045ec7fa56cd380dba85ac77a71a473d244ef3aede2fc0d287b8d7c6bc0156b6033b0c949c2058cc08e255697
83e1d92413e262e6a876336ec433a6fbc335223a test: listsinceblock block height checks (Jon Atack)
Pull request description:
This is the second commit of #17535.
This PR extends a listsinceblock test to check the new transaction 'blockheight' field recently added in #17437. It also cleans up code in the test function without changing or removing existing checks.
ACKs for top commit:
fjahr:
tested ACK 83e1d92413e262e6a876336ec433a6fbc335223a
ryanofsky:
Code review ACK 83e1d92413e262e6a876336ec433a6fbc335223a. Nice test improvements!
Tree-SHA512: 92874b49a3bc0236500495f32dfcf683e1971ca3d4c51702c69ed4ce7dfce21273754f02f93d1243d73793701d9fdf49e14b149477cd249cbbd9e4e8d5bd49f8
dcda81c47101196e53e379d965a2692515ef8363 test: add coverage for script parse error in ParseScript (pierrenn)
Pull request description:
Follow up on this suggestion : https://github.com/bitcoin/bitcoin/pull/18416#issuecomment-603966799
This adds a test case to raise the `script parse error` in `ParseScript`.
ACKs for top commit:
instagibbs:
utACK dcda81c471
Tree-SHA512: ae0ef2c00f34cee818c83582f190d5f4043159e922862f2b442b7b895b8ff3ca421533699247c12c367be77813b5205830a771cd47a18e8932807ccace2d6a1c
fad0867d6ab9430070aa7d60bf7617a6508e0586 Cleanup -includeconf error message (MarcoFalke)
fa9f711c3746ca3962f15224285a453744cd45b3 Fix crash when parsing command line with -noincludeconf=0 (MarcoFalke)
Pull request description:
The error message has several issues:
* It may crash instead of cleanly shutting down, when `-noincludeconf=0` is passed
* It doesn't quote the value
* It includes an erroneous trailing `\n`
* It is redundantly mentioning `"-includeconf cannot be used from commandline;"` several times, when once should be more than sufficient
Fix all issues by:
* Replacing `get_str()` with `write()` to fix the crash and quoting issue
* Remove the `\n` and only print the first value to fix the other issues
Before:
```
$ ./src/bitcoind -noincludeconf=0
terminate called after throwing an instance of 'std::runtime_error'
what(): JSON value is not a string as expected
Aborted (core dumped)
$ ./src/bitcoind -includeconf='a b' -includeconf=c
Error: Error parsing command line arguments: -includeconf cannot be used from commandline; -includeconf=a b
-includeconf cannot be used from commandline; -includeconf=c
```
After:
```
$ ./src/bitcoind -noincludeconf=0
Error: Error parsing command line arguments: -includeconf cannot be used from commandline; -includeconf=true
$ ./src/bitcoind -includeconf='a b' -includeconf=c
Error: Error parsing command line arguments: -includeconf cannot be used from commandline; -includeconf="a b"
```
Hopefully fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=34493
Testcase: https://github.com/bitcoin/bitcoin/files/6515429/clusterfuzz-testcase-minimized-system-6328535926046720.log
```
FUZZ=system ./src/test/fuzz/fuzz ./clusterfuzz-testcase-minimized-system-6328535926046720.log
```
See https://github.com/bitcoin/bitcoin/blob/master/doc/fuzzing.md
ACKs for top commit:
sipa:
utACK fad0867d6ab9430070aa7d60bf7617a6508e0586
Tree-SHA512: b44af93be6bf71b43669058c1449c4c6999f03b5b01b429851b149b12d77733408cb207e9a3edc6f0bffd6030c4c52165e8e23a1c2718ff5082a6ba254cc94a4
9053b88b1c15f57cdcff2fc1c761efebb2ebfefe update docstring in feature_csv_activation.py (Pierre K)
Pull request description:
These changes in the test documentation reflect the changes introduced in #17921.
ACKs for top commit:
MarcoFalke:
review ACK 9053b88
Tree-SHA512: 17fb954baded8dab1c869dd48b76b516150bae616c792c573e4114d4adfdd40195745c56570aa3050cc0015ee496acd7ec178df8ba14831dd22f9722fda84da2
f9abf4ab6d3d3e4d4b7e90723020b5422a141a6f Add logging for CValidationInterface events (Jeffrey Czyz)
6edebacb2191373e76d79a4972d6192300976096 Refactor FormatStateMessage for clarity (Jeffrey Czyz)
72f3227c83810936e7a334304e5fd7c6dab8e91b Format CValidationState properly in all cases (Jeffrey Czyz)
428ac70095253225f64462ee15c595644747f376 Add VALIDATION to BCLog::LogFlags (Jeffrey Czyz)
Pull request description:
Add logging of `CValidationInterface` callbacks using a new `VALIDATIONINTERFACE` log flag (see #12994). A separate flag is desirable as the logging can be noisy and thus may need to be disabled without affecting other logging.
This could help debug issues where there may be race conditions at play, such as #12978.
ACKs for top commit:
jnewbery:
ACK f9abf4ab6d3d3e4d4b7e90723020b5422a141a6f
hebasto:
ACK f9abf4ab6d3d3e4d4b7e90723020b5422a141a6f
ariard:
ACK f9abf4a, only changes since 0cadb12 are replacing log indication `VALIDATIONINTERFACE` by `VALIDATION` and avoiding a forward declaration with a new include
ryanofsky:
Code review ACK f9abf4ab6d3d3e4d4b7e90723020b5422a141a6f. Just suggested changes since last review (thanks!)
Tree-SHA512: 3e0f6e2c8951cf46fbad3ff440971d95d526df2a52a2e4d6452a82785c63d53accfdabae66b0b30e2fe0b00737f8d5cb717edbad1460b63acb11a72c8f5d4236
e09c701e0110350f78366fb837308c086b6503c0 scripted-diff: Bump copyright of files changed in 2020 (MarcoFalke)
6cbe6209646db8914b87bf6edbc18c6031a16f1e scripted-diff: Replace CCriticalSection with RecursiveMutex (MarcoFalke)
Pull request description:
`RecursiveMutex` better clarifies that the mutex is recursive, see also the standard library naming: https://en.cppreference.com/w/cpp/thread/recursive_mutex
For that reason, and to avoid different people asking me the same question repeatedly (e.g. https://github.com/bitcoin/bitcoin/pull/15932#pullrequestreview-339175124 ), remove the outdated alias `CCriticalSection` with a scripted-diff
## Issue being fixed or feature implemented
Speed thing up: 8075fc0c61
Unify things: ff1a390224 (and _probably_
fix issues like https://gitlab.com/dashpay/dash/-/jobs/4304343867),
876f5c3a9f,
ed58cdda13
Let tsan tests finish on smaller/slower machines:
ba1e3360f9
## What was done?
pls see individual commits
## How Has This Been Tested?
run tests locally and my in gitlab ci
https://gitlab.com/UdjinM6/dash/-/jobs/4319419014
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
## Issue being fixed or feature implemented
This changes are follow up for backport bitcoin/bitcoin#16060
## What was done?
Buried all hardened dash deployments
## How Has This Been Tested?
Run unit/functional tests.
Run dash with option `-reindex` for both mainnet/testnet - both succeed.
## Breaking Changes
No breaking changes, it should be fully compatible.
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
Move `BuildSimplifiedDiff` to the place it's actually used. This also
resolves 3 circular dependencies we have atm.
## What was done?
mostly trivial move-only changes
## How Has This Been Tested?
it compiles and linter is happy locally
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
## Issue being fixed or feature implemented
Implementation of Randomness Beacon Part 2.
This PR is the next step of #5262.
Starting from v20 activation fork, members for quorums are sorted using
(if available) the best CL signature found in Coinbase.
If no CL signature is present yet, then the usual way is used (By using
Blockhash instead)
## What was done?
## How Has This Been Tested?
Test `feature_llmq_rotation.py` was updated to cover both rotated and
non-rotated quorums.
2 quorums are mined first to ensure Chainlock are working earlier.
Then dip_24 activation is replaced by v20 activation.
The only direct way to test this change is to make sure that all
expected quorums after v20 activation are properly formed.
Note: A `wait_for_chainlocked_block_all_nodes` is called between every
rotation cycle to ensure that Coinbase will use a different Chainlock
signature.
## Breaking Changes
Yes, quorum members will be calculated differently.
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
## Issue being fixed or feature implemented
We had forgotten to harden dip20 and dip24 activation
## What was done?
Hardened dip20 and dip24 activation
## How Has This Been Tested?
Hasn't yet; should do an assumevalid=0 reindex
## Breaking Changes
Hopefully none
## Checklist:
_Go over all the following points, and put an `x` in all the boxes that
apply._
- [ ] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [ ] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
---------
Co-authored-by: Konstantin Akimov <knstqq@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
## Issue being fixed or feature implemented
Install of dash_hash will change once
https://github.com/dashpay/dash_hash/pull/17/ is merged
## What was done?
- Changed install instructions to match new install in dash_hash README
- Updated Dockerfile to install correctly
## How Has This Been Tested?
N/A
## Breaking Changes
None
## Checklist:
<!--- Go over all the following points, and put an `x` in all the boxes
that apply. -->
- [ ] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
## Issue being fixed or feature implemented
I think the logic in activate_by_name is broken
## What was done?
fix it
## How Has This Been Tested?
run tests
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
## Issue being fixed or feature implemented
`feature_pruning.py` is failing atm
## What was done?
pls see individual commits
## How Has This Been Tested?
run `feature_pruning.py` locally
gitian for this branch with `INTEGRATION_TESTS_ARGS` set to `--extended
--exclude feature_dbcrash --timeoutscale=4 --jobs=4`:
https://gitlab.com/dashpay/dash/-/pipelines/852044104
NOTE:
[`linux64_tsan-test`](https://gitlab.com/dashpay/dash/-/jobs/4197383660)
failed because tsan build binaries are super slow and we hit 30 minutes
timeout for 1 single test because of that. This is not an actual test
failure.
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
## Issue being fixed or feature implemented
## What was done?
- Bumped version of `CbTx`. Added fields `bestCLHeightDiff`,
`bestCLSignature`
- Miner starting from v20 fork, includes best CL signature in `CbTx` (if
available) or null signature.
- All nodes should verify included CL signature before accepting the
block.
## How Has This Been Tested?
Basically, activated v20 on in the beginning of
`feature_llmq_chainlocks.py`
## Breaking Changes
Yes, new version of CbTx
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
## Issue being fixed or feature implemented
Functional tests in CI and locally often fails without a good reason
(pretty randomly)
## What was done?
It was re-implemented `get_recovered_sig` and updated `create_raw_tx`
for better selection/change output.
## How Has This Been Tested?
Run functional times with bug amount of parrallel jobs:
```
test/functional/test_runner.py -j 20 feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py feature_llmq_is_cl_conflicts.py
```
Without these changes usually 2-3 instance fails.
With these changes all failures happened only for `p2p_addrv2_relay.py`
and `mempool_unbroadcast.py`. Beside feature_llmq_is_conflicts.py
improved stability of `interface_zmq_dash.py` also.
## Breaking Changes
No breaking changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
e78aaf41f43d0e2ad78fa6d8dad61032c8ef73d0 [docs] Add release notes for burying bip 9 soft fork deployments (John Newbery)
8319e738f9f118025b332e4fa804d4c31e4113f4 [tests] Add coverage for the content of getblockchaininfo.softforks (James O'Beirne)
0328dcdcfcb56dc8918697716d7686be048ad0b3 [Consensus] Bury segwit deployment (John Newbery)
1c93b9b31c2ab7358f9d55f52dd46340397c906d [Consensus] Bury CSV deployment height (John Newbery)
3862e473f0cb71a762c0306b171b591341d58142 [rpc] Tidy up reporting of buried and ongoing softforks (John Newbery)
Pull request description:
This hardcodes CSV and segwit activation heights, similar to the BIP 90 buried deployments for BIPs 34, 65 and 66.
CSV and segwit have been active for over 18 months. Hardcoding the activation height is a code simplification, makes it easier to understand segwit activation status, and reduces technical debt.
This was originally attempted by jl2012 in #11398 and again by me in #12360.
ACKs for top commit:
ajtowns:
ACK e78aaf41f43d0e2ad78fa6d8dad61032c8ef73d0 ; checked diff to previous acked commit, checked tests still work
ariard:
ACK e78aaf4, check diff, run the tests again and successfully activated csv/segwit heights on mainnet as expected.
MarcoFalke:
ACK e78aaf41f43d0e2ad78fa6d8dad61032c8ef73d0 (still didn't check if the mainnet block heights are correct, but the code looks good now)
Tree-SHA512: 7e951829106e21a81725f7d3e236eddbb59349189740907bb47e33f5dbf95c43753ac1231f47ae7bee85c8c81b2146afcdfdc11deb1503947f23093a9c399912
fa3c6575cac5e3841797980fe60b8368ae579dba lint: Add false positive to python dead code linter (MarcoFalke)
fa25668e1c8982548f1c6f94780709c625811469 test: Test p2sh-witness and bech32 in wallet_import_rescan (MarcoFalke)
fa79af298917d501cee26370fdf9d44d05133d15 test: Replace fragile "rng" with call to random() (MarcoFalke)
fac3dcf7d052586548f2100a0d576618a85741f9 test: Generate one block for each send in wallet_import_rescan (MarcoFalke)
Pull request description:
This adds test coverage for segwit in the `wallet_import_rescan` test, among other cleanups.
ACKs for top commit:
jnewbery:
ACK fa3c6575cac5e3841797980fe60b8368ae579dba
Tree-SHA512: 877741763c62c1bf9d868864a1e3f0699857e8c028e9fcd65c7eeb73600c22cbe97b7b51093737743d9e87bcb991c1fe1086f673e18765aef0fcfe27951402f0
9c23ebd6b18fb1058a8d3e8aae9e0595d3a57ad5 qa: Fix service flag comparison check in rpc_net test (Luke Dashjr)
Pull request description:
Rebase of #16936
ACKs for top commit:
darosior:
ACK 9c23ebd6b18fb1058a8d3e8aae9e0595d3a57ad5
Tree-SHA512: 74f287740403da1040ab1e235ef6eba4e304f3ee5d57a3b25d1e2e1f2f982d256528d398a4d6cb24ba393798e680a8f46cd7dae54ed84ab2c747e96288f1f884
8925df86c4df16b1070343fef8e4d238f3cc3bd1 doc: update release notes (Jon Atack)
8bb405bbadf11391ccba7b334b4cfe66dc85b390 test: getaddressinfo labels purpose deprecation test (Jon Atack)
60aba1f2f11529add115d963d05599130288ae28 rpc: simplify getaddressinfo labels, deprecate previous behavior (Jon Atack)
7851f14ccf2bcd1e9b2ad48e5e08881be06d9d21 rpc: incorporate review feedback from PR 17283 (Jon Atack)
Pull request description:
This PR builds on #17283 (now merged) and is followed by #17585.
It modifies the value returned by rpc getaddressinfo `labels` to an array of label name strings and deprecates the previous behavior of returning an array of JSON hash structures containing label `name` and address `purpose` key/value pairs.
before
```
"labels": [
{
"name": "DOUBLE SPEND",
"purpose": "receive"
}
```
after
```
"labels": [
"DOUBLE SPEND"
]
```
The deprecated behavior can be re-enabled by starting bitcoind with `-deprecatedrpc=labelspurpose`.
For context, see:
- https://github.com/bitcoin/bitcoin/pull/17283#issuecomment-554458001
- http://www.erisian.com.au/bitcoin-core-dev/log-2019-12-13.html#l-425 (lines 425-427)
- http://www.erisian.com.au/bitcoin-core-dev/log-2019-11-22.html#l-622
Reviewers: This PR may be tested manually by building, then running bitcoind with and without the `-deprecatedrpc=labelspurpose` flag while verifying the rpc getaddressinfo help text and `labels` output.
Next steps: deprecate the rpc getaddressinfo `label` field (EDIT: done in #17585) and add support for multiple labels per address. This PR will unblock those.
ACKs for top commit:
jnewbery:
reACK 8925df8
promag:
Code review ACK 8925df86c4df16b1070343fef8e4d238f3cc3bd1.
meshcollider:
Code review ACK 8925df86c4df16b1070343fef8e4d238f3cc3bd1
Tree-SHA512: c2b717209996da32b6484de7bb8800e7048410f9ce6afdb3e02a6866bd4a8f2c730f905fca27b10b877b91cf407f546e69e8c4feb9cd934325a6c71c166bd438
3bd8db80d8d335ab63ece4f110b0fadd562e80b7 [validation] fix comments in CheckInputScripts() (John Newbery)
6f6465cefcd599c89c00f7b51f42a4b87a5ffb0b scripted-diff: [validation] Rename CheckInputs to CheckInputScripts (John Newbery)
Pull request description:
CheckInputs() used to check no double spends, scripts & sigs and amounts. Since
832e074, the double spend and amount checks
have been moved to CheckTxInputs(), and CheckInputs() now just validates
input scripts. Rename the function to CheckInputScripts().
Also fix incorrect comments.
ACKs for top commit:
MarcoFalke:
re-ACK 3bd8db80d8d335ab63ece4f110b0fadd562e80b7, did the rebase myself, checked the scripted diff 👡
promag:
ACK 3bd8db80d8d335ab63ece4f110b0fadd562e80b7 :trollface:
Tree-SHA512: 7b3f8597d210492798fb784ee8ea47ea6377519111190161c7cc34a967509013f4337304f52e9bedc97b7710de7b0ff8880e08cd7f867754567f82e7b02c794c
e2ff385e138562fb3e1cc63bdd58715a2d8bad98 test: check for invalid `-prune` parameters (Sebastian Falbesoner)
Pull request description:
This small PR adds missing test coverage for invalid `-prune` parameter values / combinations:
77e23ca945/src/init.cpp (L926-L928)77e23ca945/src/init.cpp (L935-L937)77e23ca945/src/init.cpp (L844-L849)
Not sure if the tests fit into `feature_config_args.py` or should rather be moved into `feature_pruning.py`; the latter though seems to be run less often due to being very memory-hungry.
ACKs for top commit:
laanwj:
Code review ACK e2ff385e138562fb3e1cc63bdd58715a2d8bad98
Tree-SHA512: bb0db98090058ecac9f8a01301634e9dba9a65fd56b6a0b770f88da28c4f01e240e22b1225f0d231e28bdd4b5b51bff0e6853cccc46ed0190e91b84f7954a9db
c5bb142817c53c6a217163958b5d511f12171004 test: resolve bug in test/functional/interface_bitcoin_cli.py - Test -getinfo with -rpcwallet=unloaded wallet returns no balances (klementtan)
Pull request description:
I think there is a bug in this test case where the new value of `cli_get_info` is not asserted.
ACKs for top commit:
jonatack:
ACK c5bb142817c53c6a217163958b5d511f12171004
Tree-SHA512: 50c0c2c8fe63c95f951dee892fbacedf92208f47efe5ed481fbb255f15137c799d9200fa3ff31a442df0691248d7ff04d899842722c3032cd7f35553622ba38c
eadd1304c81e0b89178e4cc7630bd31650850c85 tests: Add a test for funding with sufficient preset inputs and subtractFeeFromOutputs (Andrew Chow)
ff330badd45067cb520b1cfa1844f60a4c9f2031 Default to bnb_used = false as there are many cases where BnB is not used (Andrew Chow)
Pull request description:
#17290 introduced a bug where, when we had preset inputs that covered the amount being sent and subtractFeeFrromOutputs was being used, transaction funding would result in a `Fee exceeds maximum configured by -maxtxfee` error. This was happening because we weren't setting `bnb_used = false` when the preset inputs were used as it should have been. This resulted in a too high fee because the change would go to fees accidentally.
Apparently this particular case doesn't have a test, so I've added one as well.
ACKs for top commit:
Sjors:
ACK eadd130. I can't get this new test to fail on macOS (without this PR). It passes whether or not I compile with `--enable-debug`. It does fail on Ubuntu. Yay undefined behavior... Anyway, it's a useful test.
fanquake:
ACK eadd1304c81e0b89178e4cc7630bd31650850c85
instagibbs:
utACK eadd1304c8
Tree-SHA512: 7286c321f78666eea558cc591174630d210263594df41cab1065417510591ee514ade0e1d0cec8af09a785757da68de82592b013e8fe8d4966cec3254368706e
33f5fc32e5bfbe1e89c4d20ce455bcc6dc194151 test: add rpc getaddressinfo labels test coverage (Jon Atack)
0f3539ac6d772fc646b5f184fa1efe77bf632f6a test: add listlabels test in wallet_labels.py (Jon Atack)
1388de83900eaced906d369fe9e8887ae74b2dcf rpc: add getaddressinfo code documentation (Jon Atack)
2ee0cb3330ccf70f0540cb42370796e32eff1569 rpc: update getaddressinfo RPCExamples to bech32 (Jon Atack)
8d1ed0c263f8cdff7189f02040b5d02238d93da0 rpc: clarify label vs labels in getaddressinfo RPCHelpman (Jon Atack)
5a0ed850700dfb19167d40b38f80313bd5e427ca rpc: improve getaddressinfo RPCHelpman content (Jon Atack)
70cda342cd20d0e0cd9f28405457544036968f2d rpc: improve getaddressinfo RPCHelpman formatting (Jon Atack)
Pull request description:
This PR is a continuation of the work in https://github.com/bitcoin/bitcoin/pull/12892.
Main motivations:
- There is currently no test coverage for the getaddressinfo `labels` response. Coverage here is a prerequisite before deprecating the `label` response or adding multiple labels per address.
- `bitcoin-cli help getaddressinfo` returns a few content errors, difficult-to-read formatting, and no explanation why it returns both `label` and `labels` and how they relate, which can be confusing for application developers.
Changes by order of commits:
- [x] improve/fix getaddressinfo RPCHelpman layout formatting
- [x] improve/fix getaddressinfo RPCHelpman content
- [x] clarify the `label` and `labels` fields in getaddressinfo RPCHelpman
- [x] update getaddressinfo RPCExamples addresses to bech32
- [x] add getaddressinfo code docs
- [x] add a `listlabels` test assertion in wallet_labels.py
- [x] add missing getaddressinfo `labels` test coverage and improve the existing `label` tests
Here are gists of the CLI help output:
[`bitcoin-cli help getaddressinfo` before this PR](https://gist.github.com/jonatack/022af5221a85c069780359a22643c810)
[`bitcoin-cli help getaddressinfo` after this PR](https://gist.github.com/jonatack/4ee5f6abc62a3d99269570206a5f90ba)
It seems we ought to begin a deprecation process for the getaddressinfo `label` field? If yes, I have a follow-up ready. _--> EDIT: Deprecation follow-ups #17578 and #17585 now build on this PR._
ACKs for top commit:
fjahr:
Re-ACK 33f5fc32e5bfbe1e89c4d20ce455bcc6dc194151
jnewbery:
ACK 33f5fc32e5bfbe1e89c4d20ce455bcc6dc194151.
Tree-SHA512: a001aa863090ec2566a31059477945b1c303ebeb430b33472f8b150e420fa5742fc33bca9d95571746395b607f43f6078dd5b53e238ac1f3fc648b51c8f79a07
fabd71076cd9493bd2d30a198467f5ea621b27aa ci: Print free disk space (MarcoFalke)
fad9fdbea5dfb19328282afda9588edc6f1d0ddf test: Properly deserialize integers in little-endian (MarcoFalke)
fa94fc10c881e502e6c9a71f3b7719aa955900f9 ci: Run functional tests on s390x (MarcoFalke)
Pull request description:
Top commit has no ACKs.
Tree-SHA512: 98ba77eb56f283131fdaeb393fda86cc308f1bf9781e1e0e5736b8d616528dc8ff2e494d55ba107c138083025c66a59e382fcfa9962d4349a5fd6cbbc52484c3
4671fc3d9e669da8b8781f0cbefee43cb9acd527 Expand on wallet_balance.py comment from https://github.com/bitcoin/bitcoin/pull/16766\#issuecomment-527563982 (Jeremy Rubin)
91f3073f08aff395dd813296bf99fd8ccc81bb27 Update release notes to mention changes to IsTrusted and impact on wallet (Jeremy Rubin)
8f174ef112199aa4e98d756039855cc561687c2e Systematize style of IsTrusted single line if (Jeremy Rubin)
b49dcbedf79613f0e0f61bfd742ed265213ed280 update variable naming conventions for IsTrusted (Jeremy Rubin)
5ffe0d144923f365cb1c2fad181eca15d1668692 Update comment in test/functional/wallet_balance.py (Jeremy Rubin)
a550c58267f50c59c2eea1d46edaa5019a8ad5d8 Update wallet_balance.py test to reflect new behavior (Jeremy Rubin)
5dd7da4ccd1354f09e2d00bab29288db0d5665d0 Reuse trustedParents in looped calls to IsTrusted (Jeremy Rubin)
595f09d6de7f1b94428cdd1310777aa6a4c584e5 Cache tx Trust per-call to avoid DoS (Jeremy Rubin)
dce032ce294fe0d531770f540b1de00dc1d13f4b Make IsTrusted scan parents recursively (Jeremy Rubin)
Pull request description:
This slightly modifies the behavior of IsTrusted to recursively check the parents of a transaction. Otherwise, it's possible that a parent is not IsTrusted but a child is. If a parent is not trusted, then a child should not be either.
This recursive scan can be a little expensive, so ~it might be beneficial to have a way of caching IsTrusted state, but this is a little complex because various conditions can change between calls to IsTrusted (e.g., re-org).~ I added a cache which works per call/across calls, but does not store the results semi-permanently. Which reduces DoS risk of this change. There is no risk of untrusted parents causing a resource exploitation, as we immediately return once that is detected.
This is a change that came up as a bug-fix esque change while working on OP_SECURETHEBAG. You can see the branch where this change is important here: https://github.com/bitcoin/bitcoin/compare/master...JeremyRubin:stb-with-rpc?expand=1. Essentially, without this change, we can be tricked into accepting an OP_SECURETHEBAG output because we don't properly check the parents. As this was a change which, on its own, was not dependent on OP_SECURETHEBAG, I broke it out as I felt the change stands on its own by fixing a long standing wallet bug.
The test wallet_balance.py has been corrected to meet the new behavior. The below comment, reproduced, explains what the issue is and the edge cases that can arise before this change.
# Before `test_balance()`, we have had two nodes with a balance of 50
# each and then we:
#
# 1) Sent 40 from node A to node B with fee 0.01
# 2) Sent 60 from node B to node A with fee 0.01
#
# Then we check the balances:
#
# 1) As is
# 2) With transaction 2 from above with 2x the fee
#
# Prior to #16766, in this situation, the node would immediately report
# a balance of 30 on node B as unconfirmed and trusted.
#
# After #16766, we show that balance as unconfirmed.
#
# The balance is indeed "trusted" and "confirmed" insofar as removing
# the mempool transactions would return at least that much money. But
# the algorithm after #16766 marks it as unconfirmed because the 'taint'
# tracking of transaction trust for summing balances doesn't consider
# which inputs belong to a user. In this case, the change output in
# question could be "destroyed" by replace the 1st transaction above.
#
# The post #16766 behavior is correct; we shouldn't be treating those
# funds as confirmed. If you want to rely on that specific UTXO existing
# which has given you that balance, you cannot, as a third party
# spending the other input would destroy that unconfirmed.
#
# For example, if the test transactions were:
#
# 1) Sent 40 from node A to node B with fee 0.01
# 2) Sent 10 from node B to node A with fee 0.01
#
# Then our node would report a confirmed balance of 40 + 50 - 10 = 80
# BTC, which is more than would be available if transaction 1 were
# replaced.
The release notes have been updated to note the new behavior.
ACKs for top commit:
ariard:
Code Review ACK 4671fc3, maybe extend DoS protection in a follow-up PR.
fjahr:
Code review ACK 4671fc3d9e669da8b8781f0cbefee43cb9acd527
ryanofsky:
Code review ACK 4671fc3d9e669da8b8781f0cbefee43cb9acd527. Changes since last review: 2 new commits adding suggested release note and python test comment, also a clean rebase with no changes to the earlier commits. The PR description is more comprehensive now, too. Looks good!
promag:
Code review ACK 4671fc3d9e669da8b8781f0cbefee43cb9acd527.
Tree-SHA512: 6b183ff425304fef49724290053514cb2770f4a2350dcb83660ef24af5c54f7c4c2c345b0f62bba60eb2d2f70625ee61a7fab76a7f491bb5a84be5c4cc86b92f
bd52684508ca2964e6a3af503d21ff99675380c7 test: rest /tx with an invalid/unknown txid (brunoerg)
Pull request description:
This PR adds test coverage to the endpoint `/tx` (rest) passing an invalid and an unknown txid to test its return.
Invalid -> should return status code 400 (bad request)
Unknown -> should return status code 404 (not found)
ACKs for top commit:
kallewoof:
ACK bd52684508ca2964e6a3af503d21ff99675380c7
Tree-SHA512: a7fbb63f30d06fc0855133a36e8317c7930ba13aa2b4a2dd1fc35079d59eacace72e1ffe7ae1b3e067066fe51792415940d72d923e83a659a0d5965e4110b32a
0754e9c01bd3d57aa241e313ba34c18c4897ba98 test: run feature_pruning.py without wallet compiled (Sebastian Falbesoner)
Pull request description:
Only one small part of the pruning test (sub-test `wallet_test`) is wallet-related, hence we can run all other parts without wallet compiled.
ACKs for top commit:
MarcoFalke:
cr ACK 0754e9c01bd3d57aa241e313ba34c18c4897ba98
Tree-SHA512: 856856903d21d64953ed0102cc2a96f55975c4b7d8e93e57b82c266024967160df64df2b6068be089efc05e883e8d6d12e7327053420d4c640b9d8cc5bcb1c58
fa165e954579436fe4b636e4222d8ce0c1269786 Replace stoul with ToIntegral in dbwrapper (MarcoFalke)
Pull request description:
The string is created with `%llu`. See: 7fcf53f7b4/src/leveldb/db/db_impl.cc (L1436-L1437)
So it seems odd to silently accept when parsing: whitespace, a sign character, trailing chars, overflow, ....
Fix that by using the stricter ToIntegral.
ACKs for top commit:
laanwj:
Code review ACK fa165e954579436fe4b636e4222d8ce0c1269786
practicalswift:
cr ACK fa165e954579436fe4b636e4222d8ce0c1269786
theStack:
Code-review ACK fa165e954579436fe4b636e4222d8ce0c1269786
Tree-SHA512: b87f01431ca0b971ff84610022da8679d3c33470b88cfc3f4a337e6e176a0455715588aefd40e8e2bbe7459d902dc89d7bfe34e7fd66755f631cc18dc039fa2f
3004d5a12d09d94bfc4dee2a8e8f2291996a4aaf [validation] Remove fMissingInputs from AcceptToMemoryPool() (John Newbery)
c428622a5bb1e37b2e6ab2c52791ac05d9271238 [validation] Remove unused first_invalid parameter from ProcessNewBlockHeaders() (John Newbery)
7204c6434b944f6ad51b3c895837729d3aa56eea [validation] Remove useless ret parameter from Invalid() (John Newbery)
1a37de4b3174d19a6d8691ae07e92b32fdfaef11 [validation] Remove error() calls from Invalid() calls (John Newbery)
067981e49246822421a7bcc720491427e1dba8a3 [validation] Tidy Up ValidationResult class (John Newbery)
a27a2957ed9afbe5a96caa5f0f4cbec730d27460 [validation] Add CValidationState subclasses (John Newbery)
Pull request description:
Carries out some remaining tidy-ups remaining after PR 15141:
- split ValidationState into TxValidationState and BlockValidationState (commit from ajtowns)
- various minor code style tidy-ups to the ValidationState class
- remove the useless `ret` parameter from `ValidationState::Invalid()`
- remove the now unused `first_invalid` parameter from `ProcessNewBlockHeaders()`
- remove the `fMissingInputs` parameter from `AcceptToMemoryPool()`, and deal with missing inputs the same way as other errors by using the `TxValidationState` object.
Tip for reviewers (thanks ryanofsky!): The first commit ("[validation] Add CValidationState subclasses" ) is huge and can be easier to start reviewing if you revert the rote, mechanical changes:
Substitute the commit hash of commit "[validation] Add CValidationState subclasses" for <CommitHash> in the commands below.
```sh
git checkout <CommitHash>
git grep -l ValidationState | xargs sed -i 's/BlockValidationState\|TxValidationState/CValidationState/g'
git grep -l ValidationResult | xargs sed -i 's/BlockValidationResult\|TxValidationResult/ValidationInvalidReason/g'
git grep -l MaybePunish | xargs sed -i 's/MaybePunishNode\(ForBlock\|ForTx\)/MaybePunishNode/g'
git diff HEAD^
```
After that it's possible to easily see the mechanical changes with:
```sh
git log -p -n1 -U0 --word-diff-regex=. <CommitHash>
```
ACKs for top commit:
laanwj:
ACK 3004d5a12d09d94bfc4dee2a8e8f2291996a4aaf
amitiuttarwar:
code review ACK 3004d5a12d09d94bfc4dee2a8e8f2291996a4aaf. Also built & ran tests locally.
fjahr:
Code review ACK 3004d5a12d09d94bfc4dee2a8e8f2291996a4aaf . Only nit style change and pure virtual destructor added since my last review.
ryanofsky:
Code review ACK 3004d5a12d09d94bfc4dee2a8e8f2291996a4aaf. Just whitespace change and pure virtual destructor added since last review.
Tree-SHA512: 511de1fb380a18bec1944ea82b513b6192df632ee08bb16344a2df3c40811a88f3872f04df24bc93a41643c96c48f376a04551840fd804a961490d6c702c3d36
9075d13153ce06cd59a45644831ecc43126e1e82 [docs] Add release notes for removal of REJECT reasons (John Newbery)
04a2f326ec0f06fb4fce1c4f93500752f05dede8 [validation] Fix REJECT message comments (John Newbery)
e9d5a59e34ff2d538d8f5315efd9908bf24d0fdc [validation] Remove REJECT code from CValidationState (John Newbery)
0053e16714323c1694c834fdca74f064a1a33529 [logging] Don't log REJECT code when transaction is rejected (John Newbery)
a1a07cfe99fc8cee30ba5976dc36b47b1f6532ab [validation] Fix peer punishment for bad blocks (John Newbery)
Pull request description:
We no longer send BIP 61 REJECT messages, so there's no need to set
a REJECT code in the CValidationState object.
Note that there is a minor bug fix in p2p behaviour here. Because the
call to `MaybePunishNode()` in `PeerLogicValidation::BlockChecked()` only
previously happened if the REJECT code was > 0 and < `REJECT_INTERNAL`,
then there are cases were `MaybePunishNode()` can get called where it
wasn't previously:
- when `AcceptBlockHeader()` fails with `CACHED_INVALID`.
- when `AcceptBlockHeader()` fails with `BLOCK_MISSING_PREV`.
Note that `BlockChecked()` cannot fail with an 'internal' reject code. The
only internal reject code was `REJECT_HIGHFEE`, which was only set in
ATMP.
This reverts a minor bug introduced in 5d08c9c579.
ACKs for top commit:
ariard:
ACK 9075d13, changes since last reviewed are splitting them in separate commits to ease understanding and fix nits
fjahr:
ACK 9075d13153ce06cd59a45644831ecc43126e1e82, confirmed diff to last review was fixing nits in docs/comments.
ryanofsky:
Code review ACK 9075d13153ce06cd59a45644831ecc43126e1e82. Only changes since last review are splitting the main commit and updating comments
Tree-SHA512: 58e8a1a4d4e6f156da5d29fb6ad6a62fc9c594bbfc6432b3252e962d0e9e10149bf3035185dc5320c46c09f3e49662bc2973ec759679c0f3412232087cb8a3a7
ea4cc3a7b36a9c77dbf0aff439da3ef0ea58e6e4 Truly decouple wallet from chainparams for -fallbackfee (Jorge Timón)
Pull request description:
Before it was 0 by default for main and 20000 for test and regtest.
Now it is 0 by default for all chains, thus there's no need to call Params().
Also now the default for main is properly documented.
Suggestion for release notes:
-fallbackfee was 0 (disabled) by default for the main chain, but 20000 by default for the test chains. Now it is 0 by default for all chains. Testnet and regtest users will have to add fallbackfee=20000 to their configuration if they weren't setting it and they want it to keep working like before.
Should I propose them to the wiki for the release notes or only after merge?
For more context, see https://github.com/bitcoin/bitcoin/pull/16402#issuecomment-515701042
ACKs for top commit:
MarcoFalke:
ACK ea4cc3a7b36a9c77dbf0aff439da3ef0ea58e6e4
Tree-SHA512: fdfaba5d813da4221e405e0988bef44f3856d10f897a94f9614386d14b7716f4326ab8a6646e26d41ef3f4fa61b936191e216b1b605e9ab0520b0657fc162e6c
----
Co-Authored-By: UdjinM6 <UdjinM6@users.noreply.github.com>
0ccb3addf68067200892963521a92713c4667a63 tests: Remove no longer needed UBSan suppression (float-divide-by-zero in validation.cpp) (practicalswift)
Pull request description:
Remove no longer needed UBSan suppression.
The float divide-by-zero in `validation.cpp` was fixed by instagibbs in ec30a79f1c430cc7fbda37e5d747b0b31b262fa5 (#15283).
ACKs for top commit:
MarcoFalke:
ACK 0ccb3addf68067200892963521a92713c4667a63
Tree-SHA512: 89a4f4b7371fa5725d9f801cee7ebbd17523f66017c9acfa813657dcb8d837f42209eff44ce9e5d48296a630bab9599d75f10024a0c7da7defb228f4eae3392a
5e146022daa4336de94447e5b8e5418296286927 wallet: fix scanning progress calculation for single block range (Sebastian Falbesoner)
Pull request description:
If the blockchain is rescanned for a single block (i.e. start and stop hashes are equal, and with that also the estimated start/stop verification progress values) the progress calculation could lead to a NaN value caused by a division by zero (0.0/0.0), resulting in an invalid JSON result for the `getwalletinfo` RPC. This PR fixes this behaviour by setting the progress to zero in that special case. Fixes#20297.
The behaviour can easily be reproduced by continuously running single block rescans in an endless loop, e.g. via
```bash
#!/bin/bash
while true
do
bitcoin-cli rescanblockchain $(bitcoin-cli getblockcount)
done
```
and at the same time perform some `getwalletinfo` RPCs.
On the master branch, this leads to frequent invalid responses (tested on mainchain):
```
$ bitcoin-cli getwalletinfo
error: couldn't parse reply from server
$ curl --user `cat ~/.bitcoin/.cookie` --data-binary '{"jsonrpc": "1.0", "id": "curltest", "method": "getwalletinfo", "params": []}' -H 'content-type: text/plain;' http://127.0.0.1:8332/
{"result":{"walletname":"","walletversion":169900,"format":"bdb","balance":0.00000000,"unconfirmed_balance":0.00000000,"immature_balance":0.00000000,"txcount":0,"keypoololdest":1603677276,"keypoolsize":1000,"hdseedid":"3196e33ecb47c7130e6ca60f2f895f9259860dca","keypoolsize_hd_internal":1000,"paytxfee":0.00000000,"private_keys_enabled":true,"avoid_reuse":false,"scanning":{"duration":0,"progress":},"descriptors":false},"error":null,"id":"curltest"}
```
(note that missing value for "progress" in the JSON result).
On the PR branch, the behaviour doesn't occur anymore.
ACKs for top commit:
MarcoFalke:
review ACK 5e146022daa4336de94447e5b8e5418296286927
promag:
Core review ACK 5e146022daa4336de94447e5b8e5418296286927.
Tree-SHA512: f0e6aad5a6cd08b36c5fe820fff0ef26663229b39169a4dbe757f3c795a41cf5c69c9dc90efe7515675ae1059307f8971123781a0514d10704123a6f28b125ab
## Issue being fixed or feature implemented
Upgraded version of cppcheck
## What was done?
## How Has This Been Tested?
Ran cppcheck
## Breaking Changes
None
## Checklist:
_Go over all the following points, and put an `x` in all the boxes that
apply._
- [ ] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] ~~I have commented my code, particularly in hard-to-understand
areas~~ N/A
- [ ] ~~I have added or updated relevant unit/integration/functional/e2e
tests~~ N/A
- [ ] ~~I have made corresponding changes to the documentation~~ N/A
- [ ] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
9c891b64ffd14bc8216dbd5eb60816043af265b6 net: initialize nMessageSize to max uint32_t instead of -1 (eugene)
Pull request description:
nMessageSize is uint32_t and is set to -1. This will warn with `-fsanitize=implicit-integer-sign-change` when V1TransportDeserializer calls into the ctor. This pull initializes nMessageSize to `numeric_limits<uint32_t>::max()` instead and removes the ubsan suppression.
ACKs for top commit:
laanwj:
Code review ACK 9c891b64ffd14bc8216dbd5eb60816043af265b6
promag:
Code review ACK 9c891b64ffd14bc8216dbd5eb60816043af265b6.
Tree-SHA512: f05173d9553a01d207a5a7f8ff113d9e11354c50b494a67d44d3931c151581599a9da4e28f40edd113f4698ea9115e6092b2a5b7329c841426726772076c1493
8dd5946c0b7aa8f3976b14a5de4ce84b80a9c32a add functional test (Larry Ruane)
b5a80fa7e487c37b7ac0e3874a2fabade41b9ca8 util: Handle HTTP_SERVICE_UNAVAILABLE in bitcoin-cli (Hennadii Stepanov)
Pull request description:
If `bitcoind` is processing 16 RPC requests, attempting to submit another request using `bitcoin-cli` produces this less-than-helpful error message: `error: couldn't parse reply from server`. This PR changes the error to: `error: server response: Work queue depth exceeded`.
ACKs for top commit:
fjahr:
tACK 8dd5946c0b7aa8f3976b14a5de4ce84b80a9c32a
luke-jr:
utACK 8dd5946c0b7aa8f3976b14a5de4ce84b80a9c32a (no changes since previous utACK)
hebasto:
re-ACK 8dd5946c0b7aa8f3976b14a5de4ce84b80a9c32a, only suggested changes since my [previous](https://github.com/bitcoin/bitcoin/pull/18335#pullrequestreview-460621350) review.
darosior:
ACK 8dd5946c0b7aa8f3976b14a5de4ce84b80a9c32a
Tree-SHA512: 33e25f6ff05d9b56fae2bdb68b132557bb8e995f5438ac4fbbc53c304c5152a98aa43c43600c31d8a6a2830cbd48bf8ec7d89dce50190b29ec00a43830126913
## Issue being fixed or feature implemented
the problem with retries implemented in #4793 is that they don't really
do anything besides fetching results of a failed job multiple times 🙈
## What was done?
partially reverted changes done in #4793, implemented actual job
restart. dropped `--sleep` and `--retries` and added `--attempts`
instead.
## How Has This Been Tested?
Pick any test, add some randomly failing expression somewhere and run it
with some high number of retries.
For example:
```diff
diff --git a/test/functional/feature_dip0020_activation.py b/test/functional/feature_dip0020_activation.py
index 471e4fdc66..b56a954b78 100755
--- a/test/functional/feature_dip0020_activation.py
+++ b/test/functional/feature_dip0020_activation.py
@@ -69,6 +69,7 @@ class DIP0020ActivationTest(BitcoinTestFramework):
# Should be spendable now
tx0id = self.node.sendrawtransaction(tx0_hex)
assert tx0id in set(self.node.getrawmempool())
+ assert int(tx0id[0], 16) < 4
if __name__ == '__main__':
```
On develop:
```
./test/functional/test_runner.py feature_dip0020_activation.py --retries=100 --sleep=0
```
if this fails on the first run, it keeps "failing" (simply fetching the
same results actually) till the end.
With this patch:
```
./test/functional/test_runner.py feature_dip0020_activation.py --attempts=100
```
if this fails on the first run, it can actually succeed after a few
attempts now, unless you are extremely unlucky ofc 😄
Also, check [ci results in my repo
](https://cdn.artifacts.gitlab-static.net/93/b4/93b4f8b17e5dcccab1afee165b4d74d90f05800caf65d6c48a83a1a78c979587/2023_04_08/4081291268/4478867166/job.log?response-content-type=text%2Fplain%3B%20charset%3Dutf-8&response-content-disposition=inline&Expires=1680945516&KeyName=gprd-artifacts-cdn&Signature=2d4mHCJBbgRaTDiSQ6kKIy1PdIM=).
Note:
```
...
feature_dip3_v19.py failed at attempt 1/3, Duration: 159s
...
4/179 - [1mfeature_dip3_v19.py[0m passed, Duration: 244 s
...
feature_llmq_hpmn.py failed at attempt 1/3, Duration: 284s
...
feature_llmq_hpmn.py failed at attempt 2/3, Duration: 296s
...
11/179 - [1mfeature_llmq_hpmn.py[0m failed, Duration: 233 s
...
```
An example with 2 tests failing initially and then passing:
https://gitlab.com/dashpay/dash/-/jobs/4089689970
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
This was reported/requested by @HashEngineering:
> Older versions of our App won't sync due to if (obj.nVersion ==
BASIC_BLS_VERSION) . Older versions don't know what version a SML Entry
is. As such, they will never read the type field. On the android client
this causes an offset problem when reading the mnlistdiff and it will
throw an exception that bans the peer that supplied it. Soon enough, no
peers will be left to connect to because they will all give the android
client bad data.
## What was done?
With this PR, SML will serialise the new v19 fields (`nType`,
`platformHTTPPort`, `platformNodeID`) if the client's version is at
least equal to `70227`.
Note: Serialisation for hashing skips the above rule.
Also, functional test mininode protocol version is set to `70227`.
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
During reviewing TODO were found some TODOes that can be done now.
## What was done?
- fix: follow-up dash#3467 - replaced commented code to disabled code
- follow-up bitcoin#16394 - uncommented code related to `watchonly`
feature
- removed out-dated TODO in `rpc/masternode.cpp` (already done)
- fix: renamed name of clean up test_unittests: removed TODO and updated
name of variable TRAVIS
- rewritten todo inside `.travis.yml`
- fix: adds a missing description for result of rpc `mnsync`
Last commit (`mnsync`) is an only candidate for backport to v19, other
changes are non significant.
## How Has This Been Tested?
Run functional/unit tests
## Breaking Changes
No breaking changes
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
should hopefully fix some sporadic ci test failures (like
https://gitlab.com/dashpay/dash/-/jobs/4052206622#L1962)
## What was done?
tweaked dynamically_add/update functions to make checks more consistent
and avoid some edge cases, pls see individual commits
## How Has This Been Tested?
`feature_llmq_hpmn.py` and `feature_dip3_v19.py` still work locally,
let's see if ci is now (constantly) happy about these too...
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
fabeb5b9c7f678ab3bc24c1860f8514ac52bb56f fuzz: Disable shuffle when merge=1 (MarcoFalke)
Pull request description:
This should hopefully help make the deletion of fuzz inputs more deterministic.
My tests (N=1) revealed that without this patch 7000 files differ (https://github.com/bitcoin-core/qa-assets/pull/44#issuecomment-768841467). With this patch, "only" 2000 files differ.
ACKs for top commit:
practicalswift:
cr ACK fabeb5b9c7f678ab3bc24c1860f8514ac52bb56f: `-shuffle=0` and `-prefer_small=1` make sense
Tree-SHA512: 21a701f52450d402a91dd6e0b33d564c63a9c3b919738eb9a80c24d48fc5b964088e325470738f39af0d595612c844acc7bf0941590cc2dc8c6f6ee4cb69c861
fa6af312277bb1b7e57d9b764d411c5b0873829f test: Document why syncwithvalidationinterfacequeue is needed in tests (MarcoFalke)
fa135a13b8ddaa117bd090ec43a3eab3a95755c1 Revert "test: Add missing sync_all to wallet_balance test" (MarcoFalke)
Pull request description:
syncwithvalidationinterfacequeue is a hidden test-only RPC, so it should not be used when it is not needed. Thus, either remove it or explain why it is needed.
ACKs for top commit:
fjahr:
Code review ACK fa6af312277bb1b7e57d9b764d411c5b0873829f
Tree-SHA512: de30db4ab521184091ee5beeab02989138cf7cf05088f766a2fb106151b239310b63d5380cb79e2a072f72c5ae9513aecae8eb9c1c7be713771585c3cb04d63a
3ebde2143aa98af213872b98b474d904e55056f7 [test] Fix wait condition in disconnect_p2ps (Amiti Uttarwar)
Pull request description:
#19315 currently has a [test failure](https://cirrus-ci.com/task/4545582645641216) because of a race. `disconnect_p2ps` is intended to have a `wait_until` clause that prevents this race, but the conditional doesn't match since its comparing two different object types. `MY_SUBVERSION` is defined in messages.py as a byte string, but is compared to the value returned by the RPC. This PR simply converts types to ensure they match, which should prevent the race from occurring.
HUGE PROPS TO jnewbery for discovering the issue 🔎
ACKs for top commit:
jnewbery:
ACK 3ebde2143aa98af213872b98b474d904e55056f7
glozow:
Code review ACK 3ebde2143a
Tree-SHA512: ca096b80a3e4d757a645f38846d6dc89d6a3d35c3435513a72d278e305faddd4aff9e75a767941b51b2abbf59c82679bac1e9a0140d6f285efe3053e51bcc2a8
638441928a446726ce3a7fb20433a5478e7585bb test: add parameterized constructor for msg_sendcmpct() (Sebastian Falbesoner)
Pull request description:
While working on the test for #19776 I noticed that creating a `sendcmpct` message is quite cumbersome -- due to the lack of a parameterized constructor, one needs to create an empty (that is, initialized with default values) object and then set the two fields one by one. This PR replaces the default constructor with a parameterized constructor and uses it in the test `p2p_compactblocks.py`, reducing LOC. No need to pollute the namespace with temporary throw-away message objects anymore.
ACKs for top commit:
guggero:
Code review ACK 638441928a446726ce3a7fb20433a5478e7585bb.
epson121:
Code review ACK 638441928a446726ce3a7fb20433a5478e7585bb
Tree-SHA512: 3b58d276d714b73abc6cc98d1d52dec5f6026b33f03faaeb7dcbc5d83ac377555179f98b159b2b9ecc8957999c35a1dc082e3c69299c5fde4e35f1bd0587ce9d
637d8bce741213295bd9b9d1982cae663c701ba1 Change FILE_CHAR_BLOCKLIST to FILE_CHARS_DISALLOWED (Benoit Verret)
Pull request description:
Blocklist is ambiguous. It could mean a list of blocks.
Example: "blocknotify" in the same file refers to Bitcoin blocks.
ACKs for top commit:
MarcoFalke:
ACK 637d8bce741213295bd9b9d1982cae663c701ba1
laanwj:
ACK 637d8bce741213295bd9b9d1982cae663c701ba1 — this is a clear variable name improvement
theStack:
ACK 637d8bce741213295bd9b9d1982cae663c701ba1
jonatack:
ACK 637d8bce741213295bd9b9d1982cae663c701ba1
eriknylund:
ACK 637d8bce741213295bd9b9d1982cae663c701ba1
promag:
ACK 637d8bce741213295bd9b9d1982cae663c701ba1.
Tree-SHA512: 028e7102eeaf61105736c55c119a7f5c05411f2b6715a7939c41cb9e8f13afb757bbb6e7a302b3aae21722e69dab91f6eff8099e5884d248299905b4c7687c02
854382885f18aa9a95cdde3d11591b05c305ad3f refactor: test: improve wait_for{header,merkleblock} interface (Sebastian Falbesoner)
1356a45ef042e7bd3d539fbb606d6b1be547d00f test: complete impl. of msg_merkleblock and wait_for_merkleblock (Sebastian Falbesoner)
Pull request description:
Implements the missing initialization/serialization methods for `msg_merkleblock`, based on the already present class `CMerkleBlock`. Also changes the method `wait_for_merkleblock()` to be more precise by waiting for a merkleblock with a specified blockhash instead of an arbitrary one.
In the BIP37 test `p2p_filter.py`, this new method is used to make the test of receiving merkleblock and tx if a filter is set to be more precise, by checking if they also arrive in the right order.
In the course of this PR, also the interface for the methods `wait_for_merkleblock()` and `wait_for_header()` are improved to take a hex string instead of an integer, which is more typesafe and less of a burden to the caller.
ACKs for top commit:
MarcoFalke:
ACK 854382885f18aa9a95cdde3d11591b05c305ad3f
Tree-SHA512: adaf0ac728ef0b9929cb417a7a7b4c1346c400b2d365bf6914515c67b6cfe8f4a7ecc62fb514afdce9792f0bed833416f6bca6b9620f3d5dcdc66e4d5b0b7ea3
## Issue being fixed or feature implemented
1. we need to move time forward to let invs being relayed
2. nNextInvSend in SendMessages can be bumped up to 30+ seconds into the
future in rare cases
make sure timeouts in tests are high enough to relay tx inv/wait for
corresponding islock
## What was done?
tl;dr: bump mocktime while waiting, wait longer
extracted fixes from https://github.com/dashpay/dash/pull/5288 but I
expect this to fix other sporadic test failures too
## How Has This Been Tested?
tests are ok locally and in https://github.com/dashpay/dash/pull/5288
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [ ] I have assigned this pull request to a milestone
## Motivation
Dash Core has a series of functional tests that do not behave in a
deterministic fashion and have a higher chance of failure, especially on
resource limited systems. This results in a lot of false-negatives
during CI runs, prompting the need to re-run them, which is annoying at
best and generates apathy towards CI failure at worst.
## History
The first approach was to isolate non-deterministic tests into their own
distinct GItLab runner, making it such that if a test failed, only that
one runner had to be restarted, instead of the multiple runners that
failed due to these tests.
One problem with this was that this approach effectively omitted these
tests from TSan and UBSan coverage as attempting to combine TSan and
UBSan would cause significant resource exhaustion.
## Description
An alternative approach is to introduce a new flag, `--retries`,
applicable only on non-deterministic tests, that allow a failed test to
be repeated up to a set number of times (default: 3), only reporting
failure once the limit is exhausted.
A limitation of this is that only the log dump from the last attempt
will be available.
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
- updated data file with dash addresses
- removed witness/bench32 support from rpc_createmultisig.py
- other specific changes, such as wallet balances after N mined blocks
- updated descriptors for multisort sign (fixes for bitcoin#17056)
19a354b11f85a3c6c81ff83bf702bf7a40cf5046 Output a descriptor in createmultisig and addmultisigaddress (Andrew Chow)
Pull request description:
Give a descriptor from `createmultisig` and `addmultisigaddress`.
Extracted from #16528 with `addmultisgaddress` and tests added.
ACKs for top commit:
Sjors:
tACK 19a354b11f85a3c6c81ff83bf702bf7a40cf5046
MarcoFalke:
ACK 19a354b11f85a3c6c81ff83bf702bf7a40cf5046
promag:
Code review ACK 19a354b11f85a3c6c81ff83bf702bf7a40cf5046.
meshcollider:
utACK 19a354b11f85a3c6c81ff83bf702bf7a40cf5046
Tree-SHA512: e813125fbbc358ea8d45b1748de16a29a94efd83175b748fb8fa3b0bfc8e783ed36b6c554d84f5d4ead1ba252a83a3e937b6c3f75da7b8d3b4e55f94d6013771
4bb660be90a2811b53855bf1fd33a8dd9ba3db47 Add release note (Andrew Chow)
ed96b295d747738334459490c79b7360ab85aaf7 Update descriptors.md to include sortedmulti (Andrew Chow)
80be78ea75ac9833ee3db3d468ed09fc4fe6274c Test sortedmulti descriptor using BIP 67 tests (Andrew Chow)
6f588fd2276e5b713c6d36e3b01288484ddb59c0 Add sortedmulti descriptor and unit tests (Andrew Chow)
Pull request description:
Adds a `sortedmulti()` descriptor as mentioned in https://github.com/bitcoin/bitcoin/pull/17023#issuecomment-537596416.
`sortedmulti()` works in the same way as `multi` does but sorts the pubkeys in the resulting scripts in lexicographic order as described in [BIP67](https://github.com/bitcoin/bips/blob/master/bip-0067.mediawiki). Note that this does not add support for BIP67 nor is BIP67 fully supported by this descriptor (which is why it is not named `multi67()`) as it does not require compressed pubkeys.
Tests from BIP67 were added and documentation was updated.
ACKs for top commit:
instagibbs:
re-ACK 4bb660be90
Sjors:
re-ACK 4bb660be90a2811b53855bf1fd33a8dd9ba3db47
Tree-SHA512: 93b21112a74ebe0bf316d8f3e0291f69fd975cf0a29332f9728e7b880cad312b8b14007e86adcd7899f117b9303cbcf4cb35f3bb2f2f648d1a446f83f75a70a5
ec4c79326bb670c2cc1757ecfb1900f8460c5257 signrawtransaction*: improve error for partial signing (Anthony Towns)
3c481f8921bbc587cf287329f39243abe703b868 signrawtransactionwithkey: better error messages for bad redeemScript/witnessScript (Anthony Towns)
Pull request description:
Two fixes for `signrawtransactionwith{key,wallet}` (in addition to #16250): one that checks redeemScript/witnessScript matches scriptPubKey (and if both are provided that they match each other sanely), and the other changes the warning when some-but-not-all the signatures for a CHECKMULTISIG are provided to something that suggests more signatures may be all that's required.
Fixes: #13218Fixes: #14823
ACKs for top commit:
instagibbs:
utACK ec4c79326b
achow101:
Code Review ACK ec4c79326bb670c2cc1757ecfb1900f8460c5257
meshcollider:
utACK ec4c79326bb670c2cc1757ecfb1900f8460c5257
Tree-SHA512: 0c95c91d498e85b834662b9e5c83f336ed5fd306be7701ce1dbfa0836fbeb448a267a796585512f7496e820be668b07c2a0a2f45e52dc23f09ee7d9c87e42b35
01174596e69568c434198a86f54cb9ea6740e6c2 signrawtransactionwithkey: report error when missing redeemScript/witnessScript param (Anthony Towns)
Pull request description:
Adding support for "witnessScript" as an alternative to "redeemScript" when using "signrawtransactionwithkey" meant that the `RPCTypeCheckObj()` call in `SignTransaction` can't error out just because either parameter is missing -- it's only a problem if both are missing, which isn't a state `RPCTypeCheckObj()` tests for. This results in the regression described in #16249. This patch adds some code to test for this case and give a similar error, namely:
error code: -8
error message:
Missing redeemScript/witnessScript
Fixes: #16249
ACKs for top commit:
meshcollider:
utACK 01174596e6
promag:
ACK 01174596e. Could also write test without `dict`/`del`:
Tree-SHA512: cf51346b7dea551b7f18f2a93c2a336a293b2535c62c03a5263cd2be8c58cf0cc302891da659c167e88ad1a68a756472c3c07e99f71627c61d32886fc5a3a353
fab6a0a659 test: Add test that addmultisigaddress fails for watchonly addresses (MarcoFalke)
fad81d870a test: Fixup creatmultisig documentation and whitespace (MarcoFalke)
Pull request description:
Just to make sure this is not regressed on accidentally in the future
ACKs for commit fab6a0:
jonatack:
ACK fab6a0a659
Tree-SHA512: bf8dcbc752f8910902a995e55ce486621156aa01f112990344815c4aab980298dfecc108e78245a8986a00c3871338ad16fc818a1bce9dfc6b37b9c88851e39d
f40b3b82df [tests] functional test for createmultisig RPC (Anthony Towns)
b9024fdda3 segwit support for createmultisig RPC (Anthony Towns)
d58055d25f Move AddAndGetDestinationForScript from wallet to outputype module (Anthony Towns)
9a44db2e46 Add outputtype module (Anthony Towns)
Pull request description:
Adds an "address_type" parameter that accepts "legacy", "p2sh-segwit", and "bech32" to choose the type of address created. Defaults to "legacy" rather than the value of the `-address-type` option for backwards compatibility.
As part of implementing this, OutputType is moved from wallet into its own module, and `AddAndGetDestinationForScript` is changed to apply to a `CKeyStore` rather than a wallet, and to invoke `keystore.AddCScript(script)` itself rather than expecting the caller to have done that.
Fixes#12502
Tree-SHA512: a08c1cfa89976e4fd7d29caa90919ebd34a446354d17abb862e99f2ee60ed9bc19d8a21a18547c51dc3812cb9fbed86af0bef2f1e971f62bf95cade4a7d86237
1b41c2c8a126ef4be183e1d800a17d85cab8837b test: improve gettransaction test coverage (Jon Atack)
0f34f54888f680bfbe7a29ac278636d7178a99bb rpc: fix regression in gettransaction (Jon Atack)
Pull request description:
Closes#16872.
PR #16866 renamed the `decode` argument in gettransaction to `verbose` to make it more consistent with other RPC calls like getrawtransaction. However, it inadvertently overloaded the "details" field when `verbose` is passed. The result is that the original "details" field is no longer returned correctly, which seems to be a breaking API change.
This PR:
- takes the simplest path to restoring the "details" field by renaming the decoded one back to "decoded" while leaving the `verbose` argument for API consistency, which was the main intent of #16866,
- addresses [this comment](https://github.com/bitcoin/bitcoin/pull/16185#discussion_r320740413) by mentioning in the RPC help that the new decoded field is equivalent to decoderawtransaction, and
- updates the help, functional test, and release note.
Reviewers, to test this manually, build and run `bitcoin-cli help gettransaction` and `bitcoin-cli gettransaction <wallet txid> false true`, and verify that the command returns both `details` and `decoded` fields.
ACKs for top commit:
jnewbery:
tACK 1b41c2c8a126ef4be183e1d800a17d85cab8837b
Tree-SHA512: 287edd5db7ed58fe8b548975aba58628bd45ed708b28f40174f10a35a455d89f796fbf27430aa881fc376f47aabda8803f74d4d100683bd86577a02279091cf3
7dee8f48088c75ab0e51be60679505f8ce570919 [wallet] Rename 'decode' argument in gettransaction method to 'verbose' (John Newbery)
Pull request description:
This makes the RPC method consistent with other RPC methods that have a
'verbose' option.
Change the name of the return object from 'decoded' to details.
Update help text.
ACKs for top commit:
promag:
ACK 7dee8f48088c75ab0e51be60679505f8ce570919.
meshcollider:
Code review ACK 7dee8f48088c75ab0e51be60679505f8ce570919
0xB10C:
ACK 7dee8f48088c75ab0e51be60679505f8ce570919: reviewed code
Tree-SHA512: a3a62265c8e6e914591f3b3b9f9dd4f42240dc8dab9cbac6ed8d8b8319b6cc847db2ad1689d5440c162e0698f31e39fc6b868ed918b2f62879d61b9865cae66b
/**
* Dash specific comment
*
* Seems as event on_getdata works in our P2PInterface.
* But somehow it's never called for test 'test_in_flight_max',
* it may be due to bug in net_processing.
* Due to that, part of functional tests is disabled
*/
fab365835639a3da03f8ad9a58a0db6c6c4c2314 [qa] Test that getdata requests work as expected (Suhas Daftuar)
fa883ab35ad2d4328e35b1e855d0833740a6b910 net: Use mockable time for tx download (MarcoFalke)
Pull request description:
Two commits:
* First commit changes to mockable time for tx download (refactoring, should only have an effect on regtest)
* Second commit adds a test that uses mocktime to test tx download
ACKs for top commit:
laanwj:
code review ACK 16197/commits/fab365835639a3da03f8ad9a58a0db6c6c4c2314
jamesob:
ACK fab3658356
Tree-SHA512: 3a64a3e283ec4bab1f6e506404b11f0a564a5b61d2a7508ae738a61f035e57220484c66e0ae47d847fe9f7e3ff5cc834909d7b34a9bbcea6abe01f8742806908
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
9965940e35c445ccded55510348af228ff22f0e9 doc: Add release note for the new gettransaction argument (darosior)
b8b3f0435a2837d3897e9e232ef6ca839ce74eb8 tests: Add a new functional test for gettransaction (darosior)
7f3bb247a811582d1aa4805d8e601c19808dc7ba gettransaction: add an argument to decode the transaction (darosior)
Pull request description:
This PR adds a new parameter to the `gettransaction` call : `decode`. If set to `true`, it will add a new `decoded` field to the response. This mimics the behavior of `getrawtransaction`'s `verbose` argument to avoid using 2 calls if we want to decode a wallet transaction (`gettransaction` then `decoderawtransaction`).
Fix#16181 .
ACKs for top commit:
meshcollider:
re-utACK 9965940e35c445ccded55510348af228ff22f0e9
Tree-SHA512: bcb6b4bd252b3488d6afc77659c499c2ad99fd58661eb24b6a2e17014c74f22e47fde70e00fedb4f4754915786622ad02483b2cf2c4dea0ab0eb4ac8276dbeee
0fb2e69815 CreateTransaction: Assume minimum p2sh-p2wpkh spend size for unknown change (Gregory Sanders)
b06483c96a Remove stale comment in CalculateMaximumSignedInputSize (Gregory Sanders)
Pull request description:
This is triggered anytime a fundraw type call(psbt or legacy) is used with a change output address that the wallet doesn't know how to sign for.
This regression was added in 6a34ff5335 since BnB coin selection actually cares about this.
The fix is to assume the smallest typical spend, a P2SH-P2WPKH, which is calculated using a "prototype" dummy signature flow. Future work could generalize this infrastructure to get estimated sizes of inputs for a variety of types.
I also removed a comment which I believe is stale and misleading.
Tree-SHA512: c7e2be189e524f81a7aa4454ad9370cefba715e3781f1e462c8bab77e4d27540191419029e3ebda11e3744c0703271e479dcd560d05e4d470048d9633e34da16
5eb20f81d9 Consistently use ParseHashV to validate hash inputs in rpc (Ben Woosley)
Pull request description:
ParseHashV validates the length and encoding of the string and throws
an informative RPC error on failure, which is as good or better than
these alternative calls.
Note I switched ParseHashV to check string length first, because
IsHex tests that the length is even, and an error like:
"must be of length 64 (not 63, for X)" is much more informative than
"must be hexadecimal string (not X)" in that case.
Split from #13420
Tree-SHA512: f0786b41c0d7793ff76e4b2bb35547873070bbf7561d510029e8edb93f59176277efcd4d183b3185532ea69fc0bbbf3dbe9e19362e8017007ae9d51266cd78ae
cbf2d75d8f49b7b1e32acb5373b312b484f3fa6a qa: Add getdescriptorinfo functional test (João Barbosa)
Pull request description:
The `getdescriptorinfo` RPC was added in #15368, this PR adds some tests.
Top commit has no ACKs.
Tree-SHA512: 5bf3fb5842b975089821c7ac52202ecb23df255f655862646eb532e38e335ff963f8973bcf5b8bba386183281dc9bfe7279ba1cf25fd518c9a45fb45a9243e4d
d484279a46fe2cd5e133b6c18a1e00f802084772 test: add logging to wallet_listsinceblock.py (Jon Atack)
Pull request description:
This is the first commit from #17535.
Top commit has no ACKs.
Tree-SHA512: bb4f527a41bca3ffbf69e910311ce7f85dcc7a2be41350b3c653a27f4044f392b7e528f330e9691f497212469f6b16ce263230bb7a919548dd4e3e21cc72142f
9b0e16226e6c1fb6a3550d635339f1bbb49a852f doc: Correct spelling errors in comments (Ben Woosley)
Pull request description:
And ci script output.
Identified via test/lint/lint-spelling
Before:
```
$ test/lint/lint-spelling.sh
ci/test/05_before_script.sh:29: explicitely ==> explicitly
src/compressor.h:43: Ser ==> Set
src/compressor.h:78: Ser ==> Set
src/logging/timer.h:88: outputing ==> outputting
src/node/psbt.cpp:87: minumum ==> minimum
src/qt/coincontroldialog.cpp:372: UnSelect ==> deselect
src/qt/coincontroldialog.cpp:443: unselect ==> deselect
src/qt/coincontroldialog.cpp:448: UnSelect ==> deselect
src/qt/coincontroldialog.cpp:699: UnSelect ==> deselect
src/serialize.h:211: Ser ==> Set
src/serialize.h:213: Ser ==> Set
src/serialize.h:228: Ser ==> Set
src/serialize.h:246: Ser ==> Set
src/serialize.h:484: Ser ==> Set
src/serialize.h:490: Ser ==> Set
src/serialize.h:510: Ser ==> Set
src/serialize.h:622: Ser ==> Set
src/serialize.h:740: Ser ==> Set
src/test/base32_tests.cpp:14: fo ==> of, for
src/test/base64_tests.cpp:14: fo ==> of, for
src/txmempool.h:756: incomaptible ==> incompatible
src/undo.h:26: Ser ==> Set
src/wallet/coincontrol.h:74: UnSelect ==> deselect
test/functional/feature_backwards_compatibility.py:116: Abondon ==> Abandon
test/functional/rpc_getaddressinfo_label_deprecation.py:7: superceded ==> superseded
test/lint/lint-shell.sh:44: desriptor ==> descriptor
^ Warning: codespell identified likely spelling errors. Any false positives? Add them to the list of ignored words in test/lint/lint-spelling.ignore-words.txt
```
After:
```
$ test/lint/lint-spelling.sh
src/test/base32_tests.cpp:14: fo ==> of, for
src/test/base64_tests.cpp:14: fo ==> of, for
test/functional/rpc_getaddressinfo_label_deprecation.py:7: superceded ==> superseded
^ Warning: codespell identified likely spelling errors. Any false positives? Add them to the list of ignored words in test/lint/lint-spelling.ignore-words.txt
```
ACKs for top commit:
practicalswift:
ACK 9b0e16226e6c1fb6a3550d635339f1bbb49a852f
MarcoFalke:
ACK 9b0e16226e6c1fb6a3550d635339f1bbb49a852f
Tree-SHA512: 9ce203700b11596e4b920b3c5b04f59bc7784fe5b495868d43423608180a9a553ec7efcc5ad70384f3ce462b036c2a682260efebce493c5e6a3d48716b268179
54be4e71d898de8f14e3269550d56097c023d1cc test: check specific reject reasons in feature_csv_activation.py (Sebastian Falbesoner)
Pull request description:
This is kind of a prequel to #17921: increases the general quality of the functional test `feature_csv_activation.py` by checking for the specific reject reasons whenever the sending of a block fails. To get the reason, we have to limit the script threads to 1 via the parameter `-par=1`, like it is also done in `feature_cltv.py`:
a654626f07/test/functional/feature_cltv.py (L57-L61)
The commit also fixes a bug that was uncovered with this checks: for the BIP112 version 1 tx tests, txs from `bip112txs_vary_OP_CSV_v1` have been add twice to the list `failed_txs`:
a654626f07/test/functional/feature_csv_activation.py (L396-L397)
leading also to a block rejection as expected but for the wrong reason. It seems one of those two tx lists was meant to be `bip112txs_vary_OP_CSV_v1` (without the `_9`) and it was a typo.
ACKs for top commit:
MarcoFalke:
ACK 54be4e71d898de8f14e3269550d56097c023d1cc 📶
Tree-SHA512: 9aac11aee3f53f1ae95ddb346a2f268872038f4d118c8dcf81b8201dee869774c9f3c3f1c326e370b8fd4eaf8e0673371689a96d9b1cb91be4286c88824725c3
e4f4ea47ebf7774fb6f445adde7bf7ea71fa05a1 lint: Catch use of [] or {} as default parameter values in Python functions (practicalswift)
25dd86715039586d92176eee16e9c6644d2547f0 Avoid using mutable default parameter values (practicalswift)
Pull request description:
Avoid common Python default parameter gotcha when mutable `dict`/`list`:s are used as default parameter values.
Examples of this gotcha caught during review:
* https://github.com/bitcoin/bitcoin/pull/16673#discussion_r317415261
* https://github.com/bitcoin/bitcoin/pull/14565#discussion_r241942304
Perhaps surprisingly this is how mutable list and dictionary default parameter values behave in Python:
```
>>> def f(i, j=[], k={}):
... j.append(i)
... k[i] = True
... return j, k
...
>>> f(1)
([1], {1: True})
>>> f(1)
([1, 1], {1: True})
>>> f(2)
([1, 1, 2], {1: True, 2: True})
```
In contrast to:
```
>>> def f(i, j=None, k=None):
... if j is None:
... j = []
... if k is None:
... k = {}
... j.append(i)
... k[i] = True
... return j, k
...
>>> f(1)
([1], {1: True})
>>> f(1)
([1], {1: True})
>>> f(2)
([2], {2: True})
```
The latter is typically the intended behaviour.
This PR fixes two instances of this and adds a check guarding against this gotcha going forward :-)
ACKs for top commit:
Sjors:
Oh Python... ACK e4f4ea47ebf7774fb6f445adde7bf7ea71fa05a1. Testing tip: swap the two commits.
Tree-SHA512: 56e14d24fc866211a20185c9fdb274ed046c3aed2dc0e07699e58b6f9fa3b79f6d0c880fb02d72b7fe5cc5eb7c0ff6da0ead33123344e1a872209370c2e49e3f
403e372407db1d020eedede4d322ee79d4a85dfc qa: Relax so that the subscriber is ready before publishing zmq messages (João Barbosa)
Pull request description:
Prevents the syndrome "slow joiner" - see http://zguide.zeromq.org/py:all#sockets-and-patterns - by relaxing before publishing messages.
ACKs for top commit:
MarcoFalke:
unsigned ACK 403e372407db1d020eedede4d322ee79d4a85dfc
Tree-SHA512: 0e856accbc450a9b09160bdce5112b2103dc9436cc317d31fb1c9634ebd76823a300a2e727818057fb4d0a615271772ff23e80553a13e9aa1935500de5eeec5f
37f2784952cb6f598f82922f9ce71d40c9d74e26 tests: Use colors and dots in test_runner.py output only if standard output is a terminal -- allows for using the test runner output as input to other programs (practicalswift)
Pull request description:
Use colors and dots in `test_runner.py` output only if standard output is a terminal -- allows for using the test runner output as input to other programs.
I found the need for this when parsing `test_runner.py` output while investigating intermittent functional test failures.
Before:
```
$ test/functional/test_runner.py wallet_hd.py > output 2>&1
$ less output
Temporary test directory at /tmp/test_runner_₿_🏃_20190807_074115
ESC[1mWARNING!ESC[0m There is already a bitcoind process running on this system. Tests may fail unexpectedly due to resource contention!
Remaining jobs: [wallet_hd.py]
.......................................^M ^M1/1 - ESC[1mwallet_hd.pyESC[0m passed, Duration: 20 s
ESC[1mTEST | STATUS | DURATION
ESC[0mESC[0;32mwallet_hd.py | ✓ Passed | 20 s
ESC[0mESC[1m
ALL | ✓ Passed | 20 s (accumulated)
ESC[0mRuntime: 20 s
```
After:
```
$ test/functional/test_runner.py wallet_hd.py > output 2>&1
$ less output
Temporary test directory at /tmp/test_runner_₿_🏃_20190807_074244
1/1 - wallet_hd.py passed, Duration: 20 s
WARNING! There is already a bitcoind process running on this system. Tests may fail unexpectedly due to resource contention!
Remaining jobs: [wallet_hd.py]
TEST | STATUS | DURATION
wallet_hd.py | ✓ Passed | 20 s
ALL | ✓ Passed | 20 s (accumulated)
Runtime: 20 s
```
ACKs for top commit:
laanwj:
ACK 37f2784952cb6f598f82922f9ce71d40c9d74e26
Tree-SHA512: f15d95f9e07de2954c326d63d7a4bcd2971faeaa00386600dec2fb915ec89475aeef1dbc968b2c12aa5e988d4b3ed1974d6da0b6a3f1e1a105cfd90e8cb97cf6
afc0966d725aeeb8842dc264bd48f0e9c41f6a34 Moved and renamed hash256 from util.py to zmq_interface.py (Elichai Turkel)
Pull request description:
Right now there are two `hash256(bytes)` in the test framework:
first: https://github.com/bitcoin/bitcoin/blob/master/test/functional/test_framework/util.py#L186
second: https://github.com/bitcoin/bitcoin/blob/master/test/functional/test_framework/messages.py#L60
While they have the same name they're actually doing different things, one just does a sha256d and the other sha256d and reverses the bytes.
so I renamed the second one to be `hash256r` to signify that it's hash256 reversed.
ACKs for top commit:
MarcoFalke:
unsigned ACK afc0966d725aeeb8842dc264bd48f0e9c41f6a34
fanquake:
ACK afc0966d725aeeb8842dc264bd48f0e9c41f6a34
Tree-SHA512: fb0e2db6f09c0248d92f2fd72d05a78cec1bebb44449239dbeecefa62cf4bd01d180b2e6dbcee48a8a9cea79a909e224256cabdd0739f334c2943647fe0c5fe4
fa76285fddac613c518e73b35a7486ad2ab4b992 test: Explain why -whitelist is used in feature_fee_estimation (MarcoFalke)
faff85a69a5eb0fdfd8d9a24bc27d1812e49a152 test: Format feature_fee_estimation with pep8 (MarcoFalke)
Pull request description:
ACKs for top commit:
practicalswift:
ACK fa76285fddac613c518e73b35a7486ad2ab4b992 -- diff looks correct
Sjors:
ACK fa76285, every bit of clarification helps. It's clear that without `-whitelist` the test becomes extremely slow (it does pass).
Tree-SHA512: 13ec7e4cd0409e7bb76cbcd344e31c0f612c8ce4a1f1ec6ceaedf345f634bc09786ed38d38920c3469b2862c856ee3e5e42534ef90f531bd8dc83c3db3c06417
8a22fd01140bd957036fc00419b147e4268ae9b1 avoided os-dependant path (Ferdinando M. Ametrano)
Pull request description:
The current code fails on windows because of the forward slashes; using os.path.join solves the problem and it is in general more robust
ACKs for top commit:
MarcoFalke:
ACK 8a22fd01140bd957036fc00419b147e4268ae9b1
Tree-SHA512: 813f27aea33f97c8afac52e716a55fc5d7fb69621023aba99d40df7e1d145e0ec8d1eee49ddd403b219bf0e0e168e0e987b05c78eaef611f744d99bf2fc8bc91
ca185cf5a14b16d61814d7172284bc8efcd28b69 doc: Document differences in bitcoind and bitcoin-qt locale handling (practicalswift)
Pull request description:
Document differences in `bitcoind` and `bitcoin-qt` locale handling.
Since this seems to be the root cause to the locale dependency issues we've seen over the years I thought it was worth documenting :)
Note that 1.) `QLocale` (used by Qt), 2.) C locale (used by locale-sensitive C standard library functions/POSIX functions and some parts of the C++ standard library such as `std::to_string`) and 3.) C++ locale (used by the C++ input/output library) are three separate things. This comment is about the perhaps surprising interference with the C locale (2) that takes place as part of the Qt initialization.
ACKs for top commit:
hebasto:
re-ACK ca185cf5a14b16d61814d7172284bc8efcd28b69
Tree-SHA512: e51c32f3072c506b0029a001d8b108125e1acb4f2b6a48a6be721ddadda9da0ae77a9b39ff33f9d9eebabe2244c1db09e8502e3e7012d7a5d40d98e96da0dc44
## Issue being fixed or feature implemented
fix `p2p_quorum_data.py` test broken by #5276
## What was done?
adjust data request expiration timeout in tests
## How Has This Been Tested?
`./test/functional/test_runner.py p2p_quorum_data.py`
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
bf3be5297a746982cf8e83f45d342121e5665f80 [qa] Ensure we don't generate a too-big block in p2sh sigops test (Suhas Daftuar)
Pull request description:
There's a bug in the loop that is calculating the block size in the p2sh sigops test -- we start with the size of the block when it has no transactions, and then increment by the size of each transaction we add, without regard to the changing size of the encoding for the number of transactions in the block.
This might be fine if the block construction were deterministic, but the first transaction in the block has an ECDSA signature which can be variable length, so we see intermittent failures of this test when the initial transaction has a 70-byte signature and the block ends up being one byte too big.
Fix this by double-checking the block size after construction.
ACKs for top commit:
jonasschnelli:
utACK bf3be5297a746982cf8e83f45d342121e5665f80
jnewbery:
tested ACK bf3be5297a746982cf8e83f45d342121e5665f80
Tree-SHA512: f86385b96f7a6feafa4183727f5f2c9aae8ad70060b574aad13b150f174a17ce9a0040bc51ae7a04bd08f2a5298b983a84b0aed5e86a8440189ebc63b99e64dc
e263a343d4b6a2622df6bb734cd9d51a0d20a663 test: rpc_users: Make variable names more clear. (Carl Dong)
830dc2dd0fccb7f3ec49ff7233a188d92c541e7e test: rpc_users: Also test rpcauth.py with specified password. (Carl Dong)
c73d871799982ca29c29cef90e1a78814cf34019 test: rpc_users: Add function for testing auth params. (Carl Dong)
604e2a997ff26202dd0fa1932d60dc14cc53ac6d test: rpc_users: Add function for auth'd requests. (Carl Dong)
Pull request description:
Fixes#14758
First two commits are tidy-ups which I feel are worthwhile as they are very straightforward, cut down the file by 50%, and made the final diff more minimal. Happy to squash after review.
ACKs for top commit:
laanwj:
ACK e263a343d4b6a2622df6bb734cd9d51a0d20a663
Tree-SHA512: aa75c48570a87060238932d4c68e17234e158077f6195fb4917367e1ecc565e3cd8dd0ae51f9159ddd3d03742739680391bc1246454302db22d4a608c0633e80
797b3ed9090030f32fade81803b580562d4a90a3 script: remove gitian reference from symbol-check.py (fanquake)
15fc9a0299091bfeb3370f993ad95ff638f6ba8c guix: add additional documentation to patches (fanquake)
4516e5ec9223486fe2eba7f4320d786d074a58fd lint: exclude Guix patches from spell-checking (fanquake)
de6ca41a52d2646598daae5f4620bbe766757e21 guix: no-longer pass --enable-glibc-back-compat to Guix (fanquake)
84dd81fb5bf7308b8070b53520266854fb6efad3 build: remove glibc backcompat requirement for Linux symbol checks (fanquake)
Pull request description:
Now that our Guix toolchains are based on glibc 2.24 and 2.27 (RISCV), we don't need to use the `--enable-glibc-back-compat` option to produce binaries that don't use any symbols from glibc 2.17 and 2.27 or later.
This also adds additional documentation to some Guix patches (pointed out in #22365) and removes Guix patches from the spelling linter, because that isn't our spelling.
Symbol usage: https://gist.github.com/fanquake/d15604fc580718444c5aa4b3c3c75fdc.
Guix Builds:
```bash
bash-5.1# find guix-build-$(git rev-parse --short=12 HEAD)/output/ -type f -print0 | env LC_ALL=C sort -z | xargs -r0 sha256sum
ed54e6a6cf4fab328557c0c72eb08c73f2a58c6c70959544cf4b1882e75ea69e guix-build-797b3ed90900/output/aarch64-linux-gnu/SHA256SUMS.part
83bd9dadc59f89f848d143fa4fc3964f16fe0b4bdf35e5093b577ff2c4bd1f43 guix-build-797b3ed90900/output/aarch64-linux-gnu/bitcoin-797b3ed90900-aarch64-linux-gnu-debug.tar.gz
94cb8c35281f12dec6ea5b390b66cad5e27ac8c45a30c42c8d38c438695d54c0 guix-build-797b3ed90900/output/aarch64-linux-gnu/bitcoin-797b3ed90900-aarch64-linux-gnu.tar.gz
7318b63d65c0aa52d2446de8e1f40658d2e47ab8fb0268820c3b7585d140fb23 guix-build-797b3ed90900/output/arm-linux-gnueabihf/SHA256SUMS.part
95e1ffb372964b73f539653ca703b70cf0c018801a9c4c0ffc46a0b63539253c guix-build-797b3ed90900/output/arm-linux-gnueabihf/bitcoin-797b3ed90900-arm-linux-gnueabihf-debug.tar.gz
039d3842e6499626cf955ae0a7590dd6b3d0935cdc217c98aaf9d156b0ebd3b4 guix-build-797b3ed90900/output/arm-linux-gnueabihf/bitcoin-797b3ed90900-arm-linux-gnueabihf.tar.gz
e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855 guix-build-797b3ed90900/output/dist-archive/SKIPATTEST.TAG
2c4e7b6e7aff63ba811e5bf59362d16866c3a358f8844fba8739a61192870622 guix-build-797b3ed90900/output/dist-archive/bitcoin-797b3ed90900.tar.gz
955029b949c368eabd517dd33040d2f01e2ac6a55e7b4f9107907a7c6e0c6060 guix-build-797b3ed90900/output/powerpc64-linux-gnu/SHA256SUMS.part
fd6d6b137f8efedf58a879d11205b1d4649e1f97d7f91e193239ef206fcc285d guix-build-797b3ed90900/output/powerpc64-linux-gnu/bitcoin-797b3ed90900-powerpc64-linux-gnu-debug.tar.gz
51736ac8e77737999f1b5bd4c381b0016f19a8d5e40e786fe941ff04e84c11c9 guix-build-797b3ed90900/output/powerpc64-linux-gnu/bitcoin-797b3ed90900-powerpc64-linux-gnu.tar.gz
8c244c16bfa46c1efdb120e1d91fdd14d3f14eefee8d7e1fbb0a9b4664a5c315 guix-build-797b3ed90900/output/powerpc64le-linux-gnu/SHA256SUMS.part
704ee593251a1b1c65a5bebeef93b23f266af4e8cbf8ae556150c3b2e8f06a6c guix-build-797b3ed90900/output/powerpc64le-linux-gnu/bitcoin-797b3ed90900-powerpc64le-linux-gnu-debug.tar.gz
0ec06ae7d344de20d61e3965d8b383747ef20b0e9d93a3165733ea23bdf2ead8 guix-build-797b3ed90900/output/powerpc64le-linux-gnu/bitcoin-797b3ed90900-powerpc64le-linux-gnu.tar.gz
2dd6c6ecc67b0ea40ca9c43f92efca81ccd054b8db8c197ad84ad9674d510a25 guix-build-797b3ed90900/output/riscv64-linux-gnu/SHA256SUMS.part
5ebb27a855a677f7a188d83995be6b2a3ea8606be152abb7fc7832713fb0677a guix-build-797b3ed90900/output/riscv64-linux-gnu/bitcoin-797b3ed90900-riscv64-linux-gnu-debug.tar.gz
bdaf1783f5e1861597afa37c1880364e118d9a7a7af8017302d82202791019f6 guix-build-797b3ed90900/output/riscv64-linux-gnu/bitcoin-797b3ed90900-riscv64-linux-gnu.tar.gz
726c9092b60ac2e7d7e14b2c24467fcf276a6f89170a871ddab9dce6ac230699 guix-build-797b3ed90900/output/x86_64-apple-darwin18/SHA256SUMS.part
2af4d709b44952654f3c08c86593bf2ccc9a44ed422783a1b95b8a199a894db2 guix-build-797b3ed90900/output/x86_64-apple-darwin18/bitcoin-797b3ed90900-osx-unsigned.dmg
fd49ba445aa6cf3d8c47019a05e9e5740cb0f53349344dd80671297127f49f1a guix-build-797b3ed90900/output/x86_64-apple-darwin18/bitcoin-797b3ed90900-osx-unsigned.tar.gz
3f51cbf8cf18420d4be70e656aa993675cf5e828a255c2030047ae2e059ed5b7 guix-build-797b3ed90900/output/x86_64-apple-darwin18/bitcoin-797b3ed90900-osx64.tar.gz
afd1edee1447bb88d81e972abfae4c4e065b5b1827769f033cff9472084c7c1b guix-build-797b3ed90900/output/x86_64-linux-gnu/SHA256SUMS.part
ec468ef886d25e685f4f7a18b4f7d497dedf757495e0d5beb72c23cc32ab69b5 guix-build-797b3ed90900/output/x86_64-linux-gnu/bitcoin-797b3ed90900-x86_64-linux-gnu-debug.tar.gz
1934d7294f0c9e083d38a3f68d4a61cd679defa79ce0a89f77386978692b9b18 guix-build-797b3ed90900/output/x86_64-linux-gnu/bitcoin-797b3ed90900-x86_64-linux-gnu.tar.gz
94c11c328a628052eb6f50e9816aa768f87ea7acfbbbafdab60f6928da766811 guix-build-797b3ed90900/output/x86_64-w64-mingw32/SHA256SUMS.part
fd371922ba93d81bd4a2b711d617af6756f9f0494db6d83aa0e5f491a24168ef guix-build-797b3ed90900/output/x86_64-w64-mingw32/bitcoin-797b3ed90900-win-unsigned.tar.gz
4e4ad976bc029bbbf9596ad8493accaaba8b0d5c598dd342f8da330609bbdf21 guix-build-797b3ed90900/output/x86_64-w64-mingw32/bitcoin-797b3ed90900-win64-debug.zip
3a89a16b9101e9a17d98efb9234b5bdd264c0bba2c6326511017730e1a08311f guix-build-797b3ed90900/output/x86_64-w64-mingw32/bitcoin-797b3ed90900-win64-setup-unsigned.exe
e285ab737e3c843fd3f1c26c2f053e421a3c39b33995747ce48281884d3f28d1 guix-build-797b3ed90900/output/x86_64-w64-mingw32/bitcoin-797b3ed90900-win64.zip
```
ACKs for top commit:
sipa:
utACK 797b3ed9090030f32fade81803b580562d4a90a3
hebasto:
ACK 797b3ed9090030f32fade81803b580562d4a90a3
Tree-SHA512: 3a569702d8832c155c5ce8d2f6d823f7f12603885576078bc5192bc9038a48261ecb541800f79d1e9bc86d71fa640265c5b8b89df9d8bb680b3bb05d9d78a666
1fca9811e1331ac5dae8188f6178cc37da4929a7 lint: Skip whitespace lint for guix patches (Carl Dong)
a91c46c57d88fc399432afab7bb0fb14c3e490a7 guix: Make nsis reproducible by respecting SOURCE-DATE-EPOCH (Carl Dong)
Pull request description:
```
When building nsis, if VERSION is not specified, it defaults to
cvs_version which is non-deterministic as it includes the current date.
This patches nsis to default to SOURCE_DATE_EPOCH if it exists so that
nsis is reproducible.
Upstream change: https://github.com/kichik/nsis/pull/13
```
Sidenote: also a good demonstration of how Guix allows us to flexibly patch our tools!
Note to reviewers: if you want to compare hashes, please build after Jan 16th 2021 without my substitute server enabled!
ACKs for top commit:
fanquake:
ACK 1fca9811e1331ac5dae8188f6178cc37da4929a7
Tree-SHA512: b800e0ce5f73827ad353739effb9167ec3a6bdb362c725ae20dd3f025ce78660f85c70ce1d75cd0896facf1e8fe38a9e058459ed13dec71ab3a2fe41e20eaa5d
3f373659d732a5b1e5fdc692a45b2b8179f66bec Refactor: Replace SigningProvider pointers with unique_ptrs (Andrew Chow)
3afe53c4039103670cec5f9cace897ead76e20a8 Cleanup: Drop unused GUI learnRelatedScripts method (Andrew Chow)
e2f02aa59e3402048269362ff692d49a6df35cfd Refactor: Copy CWallet signals and print function to LegacyScriptPubKeyMan (Andrew Chow)
c729afd0a3b74a3943e4c359270beaf3e6ff8a7b Box the wallet: Add multiple keyman maps and loops (Andrew Chow)
4977c30d59e88a3e5ee248144bcc023debcd895b refactor: define a UINT256_ONE global constant (Andrew Chow)
415afcccd3e5583defdb76e3a280f48e98983301 HD Split: Avoid redundant upgrades (Andrew Chow)
01b4511206e399981a77976deb15785d18db46ae Make UpgradeKeyMetadata work only on LegacyScriptPubKeyMan (Andrew Chow)
4a7e43e8460127a40a7895519587399feff3b682 Store p2sh scripts in AddAndGetDestinationForScript (Andrew Chow)
501acb5538008d98abe79288b92040bc186b93f3 Always try to sign for all pubkeys in multisig (Andrew Chow)
81610eddbc57c46ae243f45d73e715d509f53a6c List output types in an array in order to be iterated over (Andrew Chow)
eb81fc3ee58d3e88af36d8091b9e4017a8603b3c Refactor: Allow LegacyScriptPubKeyMan to be null (Andrew Chow)
fadc08ad944cad42e805228cdd58e0332f4d7184 Locking: Lock cs_KeyStore instead of cs_wallet in legacy keyman (Andrew Chow)
f5be479694d4dbaf59eef562d80fbeacb3bb7dc1 wallet: Improve CWallet:MarkDestinationsDirty (João Barbosa)
Pull request description:
Continuation of wallet boxes project.
Actually makes ScriptPubKeyMan an interface which LegacyScriptPubkeyMan. Moves around functions and things from CWallet into LegacyScriptPubKeyMan so that they are actually separate things without circular dependencies.
***
Introducing the `ScriptPubKeyMan` (short for ScriptPubKeyManager) for managing scriptPubKeys and their associated scripts and keys. This functionality is moved over from `CWallet`. Instead, `CWallet` will have a pointer to a `ScriptPubKeyMan` for every possible address type, internal and external. It will fetch the correct `ScriptPubKeyMan` as necessary. When fetching new addresses, it chooses the `ScriptPubKeyMan` based on address type and whether it is change. For signing, it takes the script and asks each `ScriptPubKeyMan` for whether that `ScriptPubKeyMan` considers that script `IsMine`, whether it has that script, or whether it is able to produce a signature for it. If so, the `ScriptPubKeyMan` will provide a `SigningProvider` to the caller which will use that in order to sign.
There is currently one `ScriptPubKeyMan` - the `LegacyScriptPubKeyMan`. Each `CWallet` will have only one `LegacyScriptPubKeyMan` with the pointers for all of the address types and change pointing to this `LegacyScriptPubKeyMan`. It is created when the wallet is loaded and all keys and metadata are loaded into it instead of `CWallet`. The `LegacyScriptPubKeyMan` is primarily made up of all of the key and script management that used to be in `CWallet`. For convenience, `CWallet` has a `GetLegacyScriptPubKeyMan` which will return the `LegacyScriptPubKeyMan` or a `nullptr` if it does not have one (not yet implemented, but callers will check for the `nullptr`). For purposes of signing, `LegacyScriptPubKeyMan`'s `GetSigningProvider` will return itself rather than a separate `SigningProvider`. This will be different for future `ScriptPubKeyMan`s.
The `LegacyScriptPubKeyMan` will also handle the importing and exporting of keys and scripts instead of `CWallet`. As such, a number of RPCs have been limited to work only if a `LegacyScriptPubKeyMan` can be retrieved from the wallet. These RPCs are `sethdseed`, `addmultisigaddress`, `importaddress`, `importprivkey`, `importpubkey`, `importmulti`, `dumpprivkey`, and `dumpwallet`. Other RPCs which relied on the wallet for scripts and keys have been modified in order to take the `SigningProvider` retrieved from the `ScriptPubKeyMan` for a given script.
Overall, these changes should not effect how everything actually works and the user should experience no difference between having this change and not having it. As such, no functional tests were changed, and the only unit tests changed were those that were directly accessing `CWallet` functions that have been removed.
This PR is the last step in the [Wallet Structure Changes](https://github.com/bitcoin-core/bitcoin-devwiki/wiki/Wallet-Class-Structure-Changes).
ACKs for top commit:
instagibbs:
re-utACK 3f373659d7
Sjors:
re-utACK 3f373659d732a5b1e5fdc692a45b2b8179f66bec (it still compiles on macOS after https://github.com/bitcoin/bitcoin/pull/17261#discussion_r370377070)
meshcollider:
Tested re-ACK 3f373659d732a5b1e5fdc692a45b2b8179f66bec
Tree-SHA512: f8e2b8d9efa750b617691e8702d217ec4c33569ec2554a060141d9eb9b9a3a5323e4216938e2485c44625d7a6e0925d40dea1362b3af9857cf08860c2f344716
e13fea975d Add regression test for PSBT signing bug #14473 (Glenn Willen)
565500508a Refactor PSBTInput signing to enforce invariant (Glenn Willen)
0f5bda2bd9 Simplify arguments to SignPSBTInput (Glenn Willen)
53e6fffb8f Add bool PSBTInputSigned (Glenn Willen)
65166d4cf8 New PartiallySignedTransaction constructor from CTransction (Glenn Willen)
4f3f5cb4b1 Remove redundant txConst parameter to FillPSBT (Glenn Willen)
fe5d22bc67 More concise conversion of CDataStream to string (Glenn Willen)
Pull request description:
As discussed in the comments on #14473, I think that bug was caused primarily by failure to adhere to the invariant that a PSBTInput always has exactly one of the two utxo fields present -- an invariant that is already enforced by PSBTInput::IsSane, but which we were temporarily suspending during signing.
This refactor repairs the invariant, also fixing the bug. It also simplifies some other code, and removes redundant parameters from some related functions.
fixes#14473
Tree-SHA512: cbad3428175e30f9b7bac3f600668dd1a8f9acde16b915d27a940a2fa6d5149d4fbe236d5808fd590fb20a032274c99e8cac34bef17f79a53fdf69a5948c0fd0
<!--
*** Please remove the following help text before submitting: ***
Provide a general summary of your changes in the Title above
Pull requests without a rationale and clear improvement may be closed
immediately.
Please provide clear motivation for your patch and explain how it
improves
Dash Core user experience or Dash Core developer experience
significantly:
* Any test improvements or new tests that improve coverage are always
welcome.
* All other changes should have accompanying unit tests (see
`src/test/`) or
functional tests (see `test/`). Contributors should note which tests
cover
modified code. If no tests exist for a region of modified code, new
tests
should accompany the change.
* Bug fixes are most welcome when they come with steps to reproduce or
an
explanation of the potential issue as well as reasoning for the way the
bug
was fixed.
* Features are welcome, but might be rejected due to design or scope
issues.
If a feature is based on a lot of dependencies, contributors should
first
consider building the system outside of Dash Core, if possible.
-->
## Issue being fixed or feature implemented
<!--- Why is this change required? What problem does it solve? -->
<!--- If it fixes an open issue, please link to the issue here. -->
Before this fix, uniqueness of HPMN `platformNodeID` was checked only
while processing a block containing a `ProRegTx` or a `ProUpServTx`.
This is not enough as a `ProRegTx` or `ProUpServTx` containing duplicate
HPMN `platformNodeID` must be rejected at tx broadcast level.
## What was done?
<!--- Describe your changes in detail -->
Checking uniqueness when calling respective RPC and when receiving such
txs.
## How Has This Been Tested?
<!--- Please describe in detail how you tested your changes. -->
<!--- Include details of your testing environment, and the tests you ran
to -->
<!--- see how your change affects other areas of the code, etc. -->
## Breaking Changes
<!--- Please describe any breaking changes your code introduces -->
## Checklist:
<!--- Go over all the following points, and put an `x` in all the boxes
that apply. -->
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
`CDeterministicMNList` stores internally a map containing the hashes of
all properties that needed to be unique.
`pubKeyOperator` don't differ between the two schemes (legacy and
basic(v19)) but their serialisation do: hence their hash.
Because this internal map stores only hashes, then we need to
re-calculate hashes and repopulate.
So when we tried to revoke a masternode after the fork, the `ProUpRevTx`
couldn't be mined because the hash of the `pubKeyOperator` differed.
## What was done?
When retrieving a `CDeterministicMNList` for a given block, if v19 is
active for that block, then we repopulate the internal map.
## How Has This Been Tested?
Without this fix, `feature_dip3_v19.py` is failing with
`failed-calc-cb-mnmerkleroot` (Error encountered on Testnet)
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: pasta <pasta@dashboost.org>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
c4027e735072c3de4b4ffb20eecd7187ff36bad7 refactor: test: use wait_for_getdata() in p2p_compactblocks.py (Sebastian Falbesoner)
Pull request description:
The method `wait_for_getdata()` was recently changed to be more precise by waiting for a specified list of hashes, instead of only matching _any_ `getdata` message (see Issue #18614 and PR #18690). This PR replaces the remaining occurences of manual inspection of `last_messages` with this call.
ACKs for top commit:
robot-visions:
ACK c4027e735072c3de4b4ffb20eecd7187ff36bad7
Tree-SHA512: e10b346742f235b6ee2ef1f32f7fd74406c1a277389f020fb9913a93e94cc9530e1e9414872b83c9d2ae652ebce2b09b2c8c8372260c1afb4e0e54fbf7a935b0
faff9e4bb431919a4bc7e4dc4a9ca188e2d18113 test: Remove unused, undocumented and misleading CScript.__add__ (MarcoFalke)
Pull request description:
See the corresponding pull #18612
ACKs for top commit:
laanwj:
ACK faff9e4bb431919a4bc7e4dc4a9ca188e2d18113 provided it passes Travis
Tree-SHA512: 5d9c4d5b6453c70b24a6960d3b42834e9b31f6dbb99ac47a6abfd85f2739d5372563e7188c22aceabeee1c37eb218bf580848356f4a77268d65f178a9419b269
9e1cb1adf1800efe429e348650931f2669b0d2c0 [trivial/doc] Fix comment type (Amiti Uttarwar)
8f30260a67166a6ab7c0f33f7ec1990d3c31761e [doc] Update unbroadcast description in RPC results (Amiti Uttarwar)
750456d6f29c63d57af05bfbdd6035bb9c965de2 [trivial] Remove misleading 'const' (Amiti Uttarwar)
fa32e676e5833a5c5fc735ef00c0a80f5fab7a2c [test] Manage node connections better in mempool persist test (Amiti Uttarwar)
1f94bb0c744a103b633c1051e8fbc01e612097dc [doc] Provide rationale for randomization in scheduling. (Amiti Uttarwar)
9c8a55d9cb0ec73f10b196e79b637aa601c0a6b7 [mempool] Don't throw expected error message when upgrading (Amiti Uttarwar)
ba5498318233ab81decbc585e9619d8ffe2df1b0 [test] Test that wallet transactions aren't rebroadcast before 12 hours (Amiti Uttarwar)
00d44a534b4e5ae249b8011360c6b0f7dc731581 [test] P2P connection behavior should meet expectations (Amiti Uttarwar)
bd093ca15de762fdaf0937a0877d17b0c2bce16e [test] updates to unbroadcast test (Amiti Uttarwar)
dab298d9ab5a5a41685f437db9081fa7b395fa73 [docs] add release notes (Amiti Uttarwar)
Pull request description:
This PR is a follow up to #18038 which introduced the idea of an unbroadcast set & focuses mostly on documentation updates and test fixes. One small functionality update to not throw an expected error in `LoadMempool` when you upgrade software versions.
#18895 is another follow up to that addresses other functionality updates.
Background context:
The unbroadcast set is a mechanism for the mempool to track locally submitted transactions (via wallet or RPC). The node does a best-effort of delivering the transactions to the network via retries every 10-15 minutes until either a `GETDATA` is received or the transaction is removed from the mempool.
ACKs for top commit:
MarcoFalke:
ACK 9e1cb1adf1 👁
gzhao408:
ACK [`9e1cb1a`](9e1cb1adf1)
Tree-SHA512: 0cd51c4ca368b9dce92d50d73ec6e9df278a259e609eef2858f24cb8595ad07acc3db781d9eb0c351715f18fca5a2b4526838981fdb34a522427e9dc868bdaa6
651f1d816f054cb9c637f8a99c9360bba381ef58 [test] wait for inital broadcast before comparing mempool entries (gzhao408)
9d3f7eb9860254eb787ebe2734fd6a26bcf365c1 [mempool] sanity check that all unbroadcast txns are in mempool (gzhao408)
a7ebe48b94c5a9195c8eabd193204c499cb4bfdb [rpc] add unbroadcast info to mempool entries and getmempoolinfo (gzhao408)
d16006960443c2efe37c896e46edae9dca86c57d [wallet] remove nLastResend logic (gzhao408)
Pull request description:
Followup to #18038 by amitiuttarwar which introduces the unbroadcast set: "a mechanism for the mempool to track locally submitted transactions" and decreases the frequency of rebroadcast from 10-15 minutes to 12-36 hours.
This PR addresses some of the outstanding TODOs building on top of it:
- remove `nLastResend` logic, which is used to ensure rebroadcast doesn't happen again if no new block has been mined (makes sense in 10-15 min period, but not necessary for 12-36 hour period). (#18038 [comment](https://github.com/bitcoin/bitcoin/pull/18038#discussion_r416826914))
- expose unbroadcast info via RPCs, for more informative queries and testing (#18038 [comment](https://github.com/bitcoin/bitcoin/pull/18038#discussion_r416837980))
- add sanity check to verify unbroadcast transactions still exist in mempool before rebroadcasting (#18038 [comment](https://github.com/bitcoin/bitcoin/pull/18038#discussion_r416861609))
ACKs for top commit:
naumenkogs:
Code review ACK 651f1d816f054cb9c637f8a99c9360bba381ef58
amitiuttarwar:
ACK 651f1d816f054cb9c637f8a99c9360bba381ef58 🎉
MarcoFalke:
Review ACK 651f1d816f054cb9c637f8a99c9360bba381ef58
Tree-SHA512: d5327e95ef39d44152b48df5c610502ae11c168f43dbbfb2885340c93d1ba9426eb3a5794573f5fc843502109cb3ffb63efa3f2db4f8f112efcde8f76d9a8845
20b6e959449d0c07639599b99ba917d2cac62493 test: refactor functional tests to use restart_node (Christopher Coverdale)
Pull request description:
fixes#19345
This PR replaces consecutive calls to `stop_node()` and `start_node()` with `restart_node()` where appropriate in the functional tests.
The commit messages are repetitive but focused on each file changed with the intention of squashing if applicable.
ACKs for top commit:
laanwj:
ACK 20b6e959449d0c07639599b99ba917d2cac62493
Tree-SHA512: 1cfa1fb8c5f01a7b00fe44e80dbef072147f21e3891098817acd4275b0c5d91dc1c787594209e117edd418f2fa3a7b2dfcbafdf87efc07f740040938d641f3a9
80d4423f997e15780bfa3f91bf4b4bf656b8ea45 Test buffered valid message (Troy Giorshev)
Pull request description:
This PR is a tweak of #19302. This sends a valid message.
Additionally, this test includes logging in the same vein as #19272.
ACKs for top commit:
MarcoFalke:
tested ACK 80d4423f997e15780bfa3f91bf4b4bf656b8ea45 (added an assert(false) to observe deterministic coverage) 🌦
gzhao408:
ACK 80d4423f99👊
Tree-SHA512: 3b1aa5ec480a1661917354788923d64595e2886448c9697ec0606a81293e8b4a4642b2b3cc9afb2206ce6f74e5c6d687308c5ad19cb73c5b354d3071ad8496f8
9a40cfc558b3f7fa4fff1270f969582af17479a5 [refactor] use waiting inside disconnect_p2ps (gzhao408)
aeb9fb414e2d000830287d9dd3fed7fc2eb570d2 [test] wait for disconnect_p2ps to be reflected in getpeerinfo (gzhao408)
e81942d2e1288367e8da94adb2b2a88be99e4751 [test] logging and style followups for bloomfilter tests (gzhao408)
Pull request description:
Followup to #19083 which adds bloomfilter-related tests.
1. Make test_node `disconnect_p2ps` wait until disconnection is complete to avoid race conditions (and not place the burden on tests) from MarcoFalke's [comment](https://github.com/bitcoin/bitcoin/pull/19083#discussion_r437383989). And clean up any redundant `wait_until`s in the functional tests.
2. Clean up style + logging in p2p_filter.py and p2p_nobloomfilter_messages.py and jonatack's other [comments](https://github.com/bitcoin/bitcoin/pull/19083#pullrequestreview-428955784)
ACKs for top commit:
jonatack:
Code review ACK 9a40cfc from re-reviewing the diff and `git range-diff 5cafb46 8386ad5 9a40cfc`
MarcoFalke:
ACK 9a40cfc558b3f7fa4fff1270f969582af17479a5 🐂
Tree-SHA512: 2e14b1c12fc08a355bd5ccad7a2a734a4ccda4bc7dc7bac171cb57359819fc1599d764290729af74832fac3e2be258c5d406c701e78ab6d7262835859b9a7d87
fa156999695ddaeb016d8320bee62f8d96679d55 test: Add basic test for BIP 37 (MarcoFalke)
Pull request description:
This does not add full coverage, but should be a good start and can be extended in the future. Currently, none of the BIP 37 p2p code has test coverage.
ACKs for top commit:
practicalswift:
Code review ACK fa156999695ddaeb016d8320bee62f8d96679d55 -- more testing coverage is better than less testing coverage
Tree-SHA512: d52e8be79240dffb769105c087ae0ae9305d599282546e4ca7379c4c7add2dbcd668265b46670aa07c357638044cf0f61a6fab7dba8971dd0f80c8f99768686e
45eff751c6d07007dabc365dc4c0e6c63e3fe5cf Add functional test for P2P eviction logic of inbound peers (Martin Zumsande)
Pull request description:
This adds a functional test for the eviction logic for inbound peers, which is triggered when the number of maximum connections is exceeded.
The functional test covers eviction protection for peers that have sent us blocks or txns recently, or that have faster pings. I couldn't find a way to test the logic of `CConnman::AttemptToEvictConnection` that is based on netgroup (see #14210 for related discussion)
Fixes#16660 (at least partially).
[Edit: Earlier, this PR also contained a unit test, which was removed after the discussion]
ACKs for top commit:
jonatack:
ACK 45eff751c6d07007dabc365dc4c0e6c63e3fe5cf
naumenkogs:
Tested ACK 45eff75
fjahr:
re-ACK 45eff751c6d07007dabc365dc4c0e6c63e3fe5cf
andrewtoth:
re-ACK 45eff751c6d07007dabc365dc4c0e6c63e3fe5cf
Tree-SHA512: 177208ab6f30dc62da1cc5f51e654f7c9770d8c6b42aca6ae7ecb30e29d3096e04d75739578e7d149a0f29dd92652b4a707e93c0f1be8aa7ed315e6ec3ab07a4
fa98e10d5efcd965ee224ec21c9e79ebb123f055 test: Remove leftover comment in mining_basic (MarcoFalke)
faedb50d89cf113084adfa50c280c295c95571a8 test: pep-8 mining_basic (MarcoFalke)
Pull request description:
Remove an accidental leftover comment from #19082, which no longer applies and thus might be confusing
ACKs for top commit:
adamjonas:
code review ACK fa98e10
Tree-SHA512: c7f7f8f579b3c6e92f45769be0a7af1a421438a3f5524db5278b2269511a9e0e08f44e3836afb26727644035897ee51ff8296d13ce23030549e7403f57b40e40
6fc641644f7193365cf2b40f5cf20374ec871943 change blacklist to blocklist (TrentZ)
Pull request description:
Let's use a more appropriate and clear word and discard the usage of the blacklist. Blocklist is clear and shall make everyone happy.
ACKs for top commit:
amitiuttarwar:
ACK 6fc641644f7193365cf2b40f5cf20374ec871943
jonatack:
ACK 6fc641644f7193365cf2b40f5cf20374ec871943 git grep shows these two lines to be the only uses of the word in the codebase other than for specifying colors for the GUI.
sipsorcery:
ACK 6fc641644f7193365cf2b40f5cf20374ec871943 due to easy change.
Tree-SHA512: 12fd55ad5c79f1a227da90c7fa730972aae6b74ab1f9df79ec1e7d0eca05c383ef7d6ef5f353620a01da344db915005339b62ca0884179d0f47fbefb084c9efc
7daffc6a90a797ce7c365a893a31a31b0206985c [test] CScriptNum Decode Check as Unit Tests (Gillian Chu)
Pull request description:
The CScriptNum test (#14816) is a roundtrip test of the test framework. Thus, it would be better suited as a unit test. This is now possible with the introduction of the unit test module for the functional tests. See #18576.
This PR:
1. Refactors the CScriptNum tests into 2 unit tests, one in script.py and one in blocktools.py.
2. Extends the script.py CScriptNum test to trial larger numbers.
ACKs for top commit:
laanwj:
ACK 7daffc6a90a797ce7c365a893a31a31b0206985c
Tree-SHA512: 17a04a4bfff1b1817bfc167824c679455d9e06e6e0164c00a7e44f8aa5041c5f5080adcc1452fd80ba1a6d8409f976c982bc481d686c434edf97a5893a32a436
f0dfac7da3886f8c1a1eedd70f4fd2bd298b9cd9 test: add executable flag for rpc_estimatefee.py (Sebastian Falbesoner)
Pull request description:
Again a functional test without executable flag set sneaked in (see e.g. https://github.com/bitcoin/bitcoin/pull/17806 and https://github.com/bitcoin/bitcoin/pull/16742 for previous similar PRs, setting the filemode from 644 to 755). Maybe a linter like suggested in https://github.com/bitcoin/bitcoin/pull/17830 would be worth considering to avoid future (trivial) PRs like this?
ACKs for top commit:
promag:
ACK f0dfac7da3886f8c1a1eedd70f4fd2bd298b9cd9.
kristapsk:
ACK f0dfac7da3886f8c1a1eedd70f4fd2bd298b9cd9
Tree-SHA512: b37c11bdef439aa9d5736c9e0e0bbcc19aff876744f0c4e099ca5c67c9ff1293f1f9140f0d167ea13fee5396ae017aa4a0f1bae4f7aec8fa80b46beb421561c1
612a931d1a3ac1678d02aed30c48fd25ccd113db tests: simplify next_block() function in feature_block (John Newbery)
Pull request description:
The solve parameter is unnecessary. Remove it and add comments.
ACKs for top commit:
MarcoFalke:
ACK 612a931d1a3ac1678d02aed30c48fd25ccd113db
TheQuantumPhysicist:
ACK 612a931
Looks good. Thanks for improving it 😄
practicalswift:
ACK 612a931d1a3ac1678d02aed30c48fd25ccd113db -- simpler is better and patch looks correct :)
Tree-SHA512: 25b4879842ea37a3f598be886f02ce4c2fb0b5a618d02b266dbd380f5cbfdd71a8bd35ddd9d6f2cf83920e37c02caf9955a841a02b17ba75ac63f88d32f8b60b
111880aaf7e12a12f0797f1b19673e3d96328edd [test] Add coverage to estimaterawfee and estimatesmartfee (Ben Woosley)
Pull request description:
This adds light functional coverage to estimaterawfee - a subset of
the testing applied to estimatesmartfee, and argument validation
testing to both estimaterawfee and estimatesmartfee.
One valid estimatesmartfee signature test is commented out because it
fails currently.
Extracted from #12940
Top commit has no ACKs.
Tree-SHA512: 361a883457b28b2dc75081666e49d6dc6b5d76eed40d858abe2dd4f35ece152cf1f99c94480a91f42a896aa2a73cf55f57921316fe66970b2d7ba691a3b17e2d
## Issue being fixed or feature implemented
Avoid lots of static_cast's from enums to underlying types. Communicate
intention better
## What was done?
implement c++23 inspired ToUnderlying, then see std::to_underlying and
https://en.cppreference.com/w/cpp/types/underlying_type; Then, we use
this instead of static_casts for enums -> underlying type
## How Has This Been Tested?
make check
## Breaking Changes
None
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: Konstantin Akimov <knstqq@gmail.com>
## Issue being fixed or feature implemented
`develop` can't sync on mainnet and testnet atm because platform quorums
are already active there but we skip non-hpms nodes when calculating
quorums.
## What was done?
Fixed the code to respect `IsV19Active`. Also dropped
`IsLLMQTypeHPMNOnly` cause it's not used anywhere else and it just makes
things more confusing imo.
## How Has This Been Tested?
Can successfully sync on mainnet/testnet
## Breaking Changes
n/a, fixes breaking changes introduced earlier :)
## Checklist:
<!--- Go over all the following points, and put an `x` in all the boxes
that apply. -->
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
## What was done?
1. Increased protocol version of mininode to match v19 changes in
`MNLISTDIFF` P2P message
2. Added verification of MNs and HPMNs (dip4) in `feature_llmq_hpmn.py`
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
## What was done?
As discussed with Platform team, threshold for `llmq_test_platform`
needed to be 67%. Therefore, the size went from 4 members to 3 (while
keeping threshold to 2)
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
## What was done?
- `masternode status` now returns the type as well
- `masternode count` now returns in addition total and total enabled MNs
per type.
## How Has This Been Tested?
Added functional tests
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
e57980b4738c10344baf136de3e050a3cb958ca5 [mempool] Remove NotifyEntryAdded and NotifyEntryRemoved callbacks (John Newbery)
2dd561f36124972d2364f941de9c3417c65f05b6 [validation] Remove pool member from ConnectTrace (John Newbery)
969b65f3f527631ede1a31c7855151e5c5d91f8f [validation] Remove NotifyEntryRemoved callback from ConnectTrace (John Newbery)
5613f9842b4000fed088b8cf7b99674c328d15e1 [validation] Remove conflictedTxs from PerBlockConnectTrace (John Newbery)
cdb893443cc16edf974f099b8485e04b3db1b1d7 [validation interface] Remove vtxConflicted from BlockConnected (John Newbery)
1168394d759b13af68acec6d5bfa04aaa24561f8 [wallet] Notify conflicted transactions in TransactionRemovedFromMempool (John Newbery)
Pull request description:
These boost signals were added in #9371, before we had a `TransactionRemovedFromMempool` method in the validation interface. The `NotifyEntryAdded` callback was used by validation to build a vector of conflicted transactions when connecting a block, which the wallet was notified of in the `BlockConnected` CValidationInterface callback.
Now that we have a `TransactionRemovedFromMempool` callback, we can fire that signal directly from the mempool for conflicted transactions.
Note that #9371 was implemented to ensure `-walletnotify` events were fired for these conflicted transaction. We inadvertently stopped sending these notifications in #16624 (Sep 2019 commit 7e89994). We should probably fix that, but in a different PR.
ACKs for top commit:
jonatack:
Re-ACK e57980b
ryanofsky:
Code review ACK e57980b4738c10344baf136de3e050a3cb958ca5, no code changes since previous review, but helpful new code comments have been added and the PR description is now more clear about where the old code came from
Tree-SHA512: 3bdbaf1ef2731e788462d4756e69c42a1efdcf168691ce1bbfdaa4b7b55ac3c5b1fd4ab7b90bcdec653703600501b4224d252cfc086aef28f9ce0da3b0563a69
e20c72f9f076681def325b5b5fa53bccda2b0eab Fire TransactionRemovedFromMempool from mempool (251)
Pull request description:
This pull request fires TransactionRemovedFromMempool callbacks from the mempool and cleans up a bunch of code.
It also resolves the `txmempool -> validation -> validationinterface -> txmempool` circular dependency.
Ideally, `validationinterface` is a dumb component that doesn't have any knowledge of the sub-systems it sends its notifications to. The commit that aims to resolve this circular dependency by moving `txmempool` specific code out of `validationinterface` to `txmempool` where it belongs.
ACKs for top commit:
jnewbery:
ACK e20c72f9f076681def325b5b5fa53bccda2b0eab
Tree-SHA512: 354c3ff1113b21a0b511d80d604edfe3846dddae3355e43d1387f68906e54bf5dc01e7c029edc0b8e635b500b2ab97ee50362e2486eb4319f7347ee9a9e6cef3
## Issue being fixed or feature implemented
## What was done?
Implementation of 4k collateral HPMN.
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: thephez <thephez@users.noreply.github.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: pasta <pasta@dashboost.org>
Co-authored-by: PastaPastaPasta <6443210+pastapastapasta@users.noreply.github.com>
Co-authored-by: UdjinM6 <1935069+Udjinm6@users.noreply.github.com>
Co-authored-by: Konstantin Akimov <545784+knst@users.noreply.github.com>
fa499b5f027f77c0bf13699852c8c06f78e27bef rpc: bugfix: Properly use iswitness in converttopsbt (MarcoFalke)
fa5c5cd141f0265a5693234690ac757b811157d8 rpc: Switch touched RPCs to IsValidNumArgs (MarcoFalke)
Pull request description:
When a serialized transaction has inputs, there is no risk in only trying to deserialize it with witness allowed. (This is how all transactions from p2p are deserialized.) In fact, it would avoid a common issue where a transaction with inputs can be deserialized in two ways:
* Fixes#12989
* Fixes#15872
* Fixes#15701
* Fixes#13738
* ...
When a serialized transaction has no inputs, there is no risk in only trying to deserialze it with witness disallowed. (A transaction without inputs can't have corresponding witness data)
ACKs for commit fa499b:
meshcollider:
utACK fa499b5f02
ryanofsky:
utACK fa499b5f027f77c0bf13699852c8c06f78e27bef. Changes since last review: consolidating commits and making iswitness documentation the same across methods.
PastaPastaPasta:
utACK fa499b5f027f77c0bf13699852c8c06f78e27bef
Tree-SHA512: a64423a3131f3f0222a40da557c8b590c9ff01b45bcd40796f77a1a64ae74c6680a6be9d01ece95c492dfbcc7e2810409d2c2b336c2894af00bb213972fc85c6
7813eb1db1 [qa] Overhaul p2p_compactblocks.py (Suhas Daftuar)
+ extra fixes for pull request #1966 (compact blocks)
Pull request description:
Remove tests of:
- compactblock behavior in a simulated pre-segwit version of bitcoind
This should have been removed a long time ago, as it is not generally
necessary for us to test the behavior of old nodes (except perhaps if we
want to test that upgrading from an old node to a new one behaves properly)
- compactblock behavior during segwit upgrade (ie verifying that network
behavior before and after activation was as expected)
This is unnecessary to test now that segwit activation has already happened.
ACKs for commit 7813eb:
jnewbery:
utACK 7813eb1db132c023902ad945995cc32a325893ca
Tree-SHA512: cadf035e6f822fa8cff974ed0c2e88a1d4d7da559b341e574e785fd3d309cc2c98c63bc05479265dc00550ae7b77fc3cbe815caae7f68bcff13a04367dca9b52
b651ef7e1c submitheader: more directly test missing prev block header (Gregory Sanders)
1e7f741745 remove some magic mining constants in functional tests (Gregory Sanders)
Pull request description:
The fewer magic numbers the better.
Also more directly tested a `submitheader` case of bad previous blockhash.
Tree-SHA512: 52b01a6aa199fa909eea4e9e84409a901933e545724e33149cc4132c82168199fd678809b6d94d95c9ff6ad02238a9552363620d13b8beaa5d4b67ade9ef425c
## Issue being fixed or feature implemented
it was picking the wrong DMN as a payee...
## What was done?
see code and notes
## How Has This Been Tested?
run tests
## Breaking Changes
n/a
## Checklist:
<!--- Go over all the following points, and put an `x` in all the boxes
that apply. -->
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
deaa6dd144f5650b385658a0c4f9a014aff8dde2 psbt: check output index is within bounds before accessing (Andrew Chow)
f1ef7f0aa46338f4cd8de79696027a1bf868f359 Don't calculate tx fees for PSBTs with invalid money values (Andrew Chow)
Pull request description:
Fixes#17149
Two classes of issues were found by the psbt fuzzer: values out of range and causing overflows, and prevout indexes being out of range. This PR fixes both.
When accessing a specific output using the index given in the tx, check that it is actually a possible output before trying to access the output.
When summing and checking amounts for `decodepsbt` and `analyzepsbt`, make sure that the values are actually valid money values.. Otherwise, stop summing and don't show the fee. For `analyzepsbt`, return that the next role is the Creator since the Creator needs to remake the transaction to be valid.
ACKs for top commit:
practicalswift:
ACK deaa6dd144f5650b385658a0c4f9a014aff8dde2 -- only change since last ACK was the addition of tests
gwillen:
tested ACK deaa6dd, would also like to see this merged!
Tree-SHA512: 06c36720bbb5a7ab1c29f7d15878bf9f0d3e5760c06bff479d412e1bf07bb3e0e9ab6cca820a4bfedaab71bfd7af813807e87cbcdf0af25cc3f66a53a06dbcfd
773d4572a4864ab7b6380858d07d9579ff6dd9a2 Mark PSBTs spending unspendable outputs as invalid in analysis (Andrew Chow)
638e40cb6080800c7b0a7f4028f63326acbe4700 Have a PSBTAnalysis state that indicates invalid PSBT (Andrew Chow)
Pull request description:
When analyzing an unspendable PSBT, report that it is unspendable and exit analysis early.
ACKs for top commit:
Sjors:
ACK 773d457
instagibbs:
After some thought ACK 773d4572a4
Tree-SHA512: 99b0cb2fa1ea37593fc65a20effe881639d69ddeeecf5197bc87bc7f2220cbeb40f1d429d517e4d27f2e9fb563a00cd845d2b4b1ce05246a75a6cb56fb9b0ba5
