b341143 [build] Add missing stuff to clean-local - test/functional/test_framework/__pycache__ - test/cache (Karl-Johan Alm)
Pull request description:
After doing
```
./autogen.sh && ./configure && make
make clean
make distclean
```
and moving `.gitignore` aside, the following files still remain after this patch:
```
Makefile.in
aclocal.m4
autom4te.cache/
build-aux/compile
build-aux/config.guess
build-aux/config.sub
build-aux/depcomp
build-aux/install-sh
build-aux/ltmain.sh
build-aux/m4/libtool.m4
build-aux/m4/ltoptions.m4
build-aux/m4/ltsugar.m4
build-aux/m4/ltversion.m4
build-aux/m4/lt~obsolete.m4
build-aux/missing
build-aux/test-driver
configure
doc/man/Makefile.in
src/Makefile.in
src/config/bitcoin-config.h.in
```
Most are automake related so I guess it's fine if they litter around.
Tree-SHA512: 7566f56a79932cc1d6ee6ff487d121e3909db57167775e1b27209d93bcc1c14e47b0fcc9c0c272c4b9df907c1bc0664f02006a21b3b6939fa50fc2a5762729e4
Instead of maintaining not-easily-tested instructions for building BerkeleyDB
in doc/build-unix.md, package the installation as a script in contrib/. This
allows shared usage from a number of contexts, e.g. Docker.
Thanks to @jonasschnelli, @laanwj for feedback.
cc5c39d [Build] Add AM_OBJCXXFLAGS and QT_PIE_FLAGS to OBJCXXFLAGS to future-proof darwin targets (fanquake)
f8c6697 Fix automake warnings when running autogen.sh (Evan Klitzke)
Pull request description:
Adjusted @eklitzke's commit to completely remove GZIP_ENV.
Added a commit to address OBJCXXFLAGS.
Rebased on master.
Relevant info from @theuni & #11013 below.
--------
GZIP_ENV was indeed added for determinism, but gitian exports this as needed, so it's not really necessary. I'd rather just remove it.
The mm.o rule was added to support XCode 4.2's ancient version of automake. That's irrelevant now, so it makes sense to remove that too.
All darwin targets are PIE by default, so we don't technically need the flags, but I'd be more comfortable if we hooked up the OBJCXXFLAGS in case future ones are added.
--------
The second commit addresses the last point, but could probably use a better commit message.
These warnings are removed from autogen output:
```
Makefile.am:12: warning: user variable 'GZIP_ENV' defined here ...
/usr/local/Cellar/automake/1.15.1/share/automake-1.15/am/distdir.am: ... overrides Automake variable 'GZIP_ENV' defined here
src/Makefile.am: installing 'build-aux/depcomp'
src/Makefile.am:503: warning: user target '.mm.o' defined here ...
/usr/local/Cellar/automake/1.15.1/share/automake-1.15/am/depend2.am: ... overrides Automake target '.mm.o' defined here
```
Tree-SHA512: bd59df5f6d3aafe35d5e36925bfe61cc71e774583a0438d7dd946c9e7ecf6e59d42f90a58b8cfef0faa404c81050338ad4cefe721b4a949af881e73b6ab254d4
fa81534 Add share/rpcuser to dist. source code archive (MarcoFalke)
Pull request description:
As the legacy rpcuser and rpcpassword are deprected since 0.12.0, we should actually include the script to generate the new auth pair in the distributed source code archive.
Ref: #6753
(Tagging for backport, since it is a trivial bugfix)
Tree-SHA512: f2737957a92396444573f41071a785be5fb318df9efeb3ade7e56b3b56d512e5f9ca36723365fe5be8aaee69c5e8d8ed1178510bf02186c848b3910ee001ecb9
Remove leveldb baseline coverage gathering.
Added filter rules to remove all of the subtress (leveldb, secp256k1, ctaes, univalue) and
benchmarking from the coverage report. These items are unnecessary as we do not test for any
of the subtrees and benchmark coverage is unneeded.
Instead of using lcov -r (which is extremely slow), first use a python script to perform bulk cleanup of the /usr/include/* coverage. Then use lcov -a to remove the duplicate entries. This has the same effect of lcov -r but runs significantly faster
Added an option to configure to allow for branch coverage statistics gathering.
Disabled logprint macro when coverage testing is on so that unnecessary branches are not analyzed.
bctest.py is only used as an import by bitcoin-util-test.py. There's no
value in keeping it as a separate module, so let's merge them into a
single module to keep building and packaging simpler.
bitcoin-test-util is importable as a module, so if any future modules
really want to import the code from bctest.py, they can import
bitcoin-test-util and call the bctest functions by name.
These were meant to help build subdir targets from the top builddir, but cause
infinite recursion when going the other way.
If anyone actually uses these, we can add back specific targets.
This was caused by an pyc files hanging around from previous
python2 invocations, when the matching .py missing from that path.
This should not be a problem with python3's tagged caches.
- Link pull-tester/rpc-tests.py to the build dir
- Add the build-dir's config to the python path so that tests can find it
- The tests themselves are in srcdir
- Clean up __pycache__ in 'make clean'
Unfortunately, the target namees defined at the Makefile.am level can't be used
for *.in substitution. So these new defines will have to stay synced up with
those targets.
Using the new variables for the deploy targets in the main Makefile.am will
ensure that they stay in sync, otherwise build tests will fail.
Ubuntu 16.04 "xenial xerus" does not come with Python 2.x by default.
It is possible to install a python-2.7 package, but this has its own
problem: no `python` or `python2` symlink (see #7717).
This fixes the following scripts to work with python 3:
- `make check` (bctest,py, bitcoin-util-test.py)
- `make translate` (extract_strings_qt.py)
- `make symbols-check` (symbol-check.py)
- `make security-check` (security-check.py)
Explicitly call the python commands using $(PYTHON) instead
of relying on the interpreter line at the top of the scripts.
The RPC tests (via `qa/pull-tester/rpc-tests.py`) are now executed,
when gathering code coverage data, for example with `make cov`.
Generating coverage data requires `lcov`, which can installed with:
sudo apt-get install lcov
To also use the BitcoinJ tests, get the test tool:
TOOL_URL=https://github.com/theuni/bitcoind-comparisontool/raw/master/pull-tests-8c6666f.jar
TOOL_HASH=a865332b3827abcde684ab79f5f43c083b0b6a4c97ff5508c79f29fee24f11cd
wget $TOOL_URL -O ./share/BitcoindComparisonTool.jar
echo "$TOOL_HASH ./share/BitcoindComparisonTool.jar" | shasum --algorithm 256 --check
The coverage data can be generated with:
./autogen.sh
./configure --enable-lcov --with-comparison-tool=./share/BitcoindComparisonTool.jar
make
make cov
Optionally the options `--enable-extended-rpc-tests` and
`--enable-comparison-tool-reorg-tests` may be used to enable more time
consuming tests.
It then runs the tests and generates two HTML reports:
- test_bitcoin.coverage/index.html
- total.coverage/index.html
Until now there were quite a few leftovers, and only the coverage
related files in `src/` were cleaned, while the ones in the other dirs
remained. `qa/tmp/` is related to the BitcoinJ tests, and `cache/` is
related to RPC tests.
1) created rpc-tests.py
2) deleted rpc-tests.sh
3) travis.yml points to rpc-tests.py
4) Modified Makefile.am
5) Updated README.md
6) Added tests_config.py and deleted tests-config.sh
7) Modified configure.ac with script to set correct path in tests_config.py
