c276df775914e4e42993c76e172ef159e3b830d4 zmq: enable tcp keepalive (mruddy)
Pull request description:
This addresses https://github.com/bitcoin/bitcoin/issues/12754.
These changes enable node operators to address the silent dropping (by network middle boxes) of long-lived low-activity ZMQ TCP connections via further operating system level TCP keepalive configuration. For example, ZMQ sockets that publish block hashes can be affected in this way due to the length of time it sometimes takes between finding blocks (e.g.- sometimes more than an hour).
Prior to this patch, operating system level TCP keepalive configurations would not take effect since the SO_KEEPALIVE option was not enabled on the underlying socket.
There are additional ZMQ socket options related to TCP keepalive that can be set. However, I decided not to implement those options in this changeset because doing so would require adding additional bitcoin node configuration options, and would not yield a better outcome. I preferred a small, easily reviewable patch that doesn't add a bunch of new config options, with the tradeoff that the fine tuning would have to be done via well-documented operating system specific configurations.
I tested this patch by running a node with:
`./src/qt/bitcoin-qt -regtest -txindex -datadir=/tmp/node -zmqpubhashblock=tcp://127.0.0.1:28332 &`
and connecting to it with:
`python3 ./contrib/zmq/zmq_sub.py`
Without these changes, `ss -panto | grep 28332 | grep ESTAB | grep bitcoin` will report no keepalive timer information. With these changes, the output from the prior command will show keepalive timer information consistent with the configuration at the time of connection establishment, e.g.-: `timer:(keepalive,119min,0)`.
I also tested with a non-TCP transport and did not witness any adverse effects:
`./src/qt/bitcoin-qt -regtest -txindex -datadir=/tmp/node -zmqpubhashblock=ipc:///tmp/bitcoin.block &`
ACKs for top commit:
adamjonas:
Just to summarize for those looking to review - as of c276df775914e4e42993c76e172ef159e3b830d4 there are 3 tACKs (n-thumann, Haaroon, and dlogemann), 1 "looks good to me" (laanwj) with no NACKs or any show-stopping concerns raised.
jonasschnelli:
utACK c276df775914e4e42993c76e172ef159e3b830d4
Tree-SHA512: b884c2c9814e97e666546a7188c48f9de9541499a11a934bd48dd16169a900c900fa519feb3b1cb7e9915fc7539aac2829c7806b5937b4e1409b4805f3ef6cd1
* Merge #14060: ZMQ: add options to configure outbound message high water mark, aka SNDHWM
a4edb168b635b6f5c36324e44961cd42cf9bbbaa ZMQ: add options to configure outbound message high water mark, aka SNDHWM (mruddy)
Pull request description:
ZMQ: add options to configure outbound message high water mark, aka SNDHWM
This is my attempt at https://github.com/bitcoin/bitcoin/pull/13315
Tree-SHA512: a4cc3bcf179776899261a97c8c4f31f35d1d8950fd71a09a79c5c064879b38e600b26824c89c4091d941502ed5b0255390882f7d44baf9e6dc49d685a86e8edb
* High watermark settings for Dash-specific messages
Signed-off-by: Dzutte <dzutte.tomsk@gmail.com>
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
* Use single-threaded scheduler for IS, CL and Governance notifications
* Pass shared_ptr-s instead of objects themselves for CL, IS and Governance notifiers in CMainSignals/CValidatibnInterface
* llmq: Create shared_ptr for clsig at the root of its lifetime
* llmq: Create shared_ptr for islock clsig at the root of its lifetime
* llmq: Create shared_ptr for recSig at the root of its lifetime
Co-authored-by: xdustinface <xdustinfacex@gmail.com>
* scripted-diff: Replace #include "" with #include <> (ryanofsky)
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* scripted-diff: Replace #include "" with #include <> (Dash Specific)
-BEGIN VERIFY SCRIPT-
for f in \
src/bls/*.cpp \
src/bls/*.h \
src/evo/*.cpp \
src/evo/*.h \
src/governance/*.cpp \
src/governance/*.h \
src/llmq/*.cpp \
src/llmq/*.h \
src/masternode/*.cpp \
src/masternode/*.h \
src/privatesend/*.cpp \
src/privatesend/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* build: Remove -I for everything but project root
Remove -I from build system for everything but the project root,
and built-in dependencies.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/Makefile.test.include
* qt: refactor: Use absolute include paths in .ui files
* qt: refactor: Changes to make include paths absolute
This makes all include paths in the GUI absolute.
Many changes are involved as every single source file in
src/qt/ assumes to be able to use relative includes.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/qt/dash.cpp
# src/qt/optionsmodel.cpp
# src/qt/test/rpcnestedtests.cpp
* test: refactor: Use absolute include paths for test data files
* Recommend #include<> syntax in developer notes
* refactor: Include obj/build.h instead of build.h
* END BACKPORT #11651 Remove trailing whitespace causing travis failure
* fix backport 11651
Signed-off-by: Pasta <pasta@dashboost.org>
* More of 11651
* fix blockchain.cpp
Signed-off-by: pasta <pasta@dashboost.org>
* Add missing "qt/" in includes
* Add missing "test/" in includes
* Fix trailing whitespaces
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: MeshCollider <dobsonsa68@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
36d326e8b Use nullptr instead of zero (0) as the null pointer constant (practicalswift)
Pull request description:
Use `nullptr` instead of zero (0) as the null pointer constant.
The road towards `nullptr` (C++11) is split into two PRs:
* `NULL` → `nullptr` is handled in PR #10483 (scripted)
* `0` → `nullptr` is handled in PR #10645 (manual, this PR)
By using the C++11 keyword `nullptr` we are guaranteed a prvalue of type `std::nullptr_t`.
For a more thorough discussion, see "A name for the null pointer: nullptr" (Sutter &
Stroustrup), http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2431.pdf
Tree-SHA512: 5412404b40a94ea2d9fc8f81573559c4ffe559749301d486b09d41a7a736345ad602d08ac590930bb00a49692b6075520cf3d543e4da6ccd5b29fa9bcc3f15ea
1c897fc Missing includes (Jorge Timón)
a1fd450 Trivial: Remove unneeded includes from .h: (Jorge Timón)
Tree-SHA512: ada3e62cc2435e58172a88b380be371b717a05725956c15e5493b6e19fe2903e5e6e43fd22dc24699333a0e8a0c7b42eb1ae61b41cb4ba82495be18e2d4ef3c6
move "#include "chain.h"" down a line
Signed-off-by: Pasta <pasta@dashboost.org>
* Contains dashification. disables `-debug dash`
Merge #9424: Change LogAcceptCategory to use uint32_t rather than sets of strings.
6b3bb3d Change LogAcceptCategory to use uint32_t rather than sets of strings. (Gregory Maxwell)
Tree-SHA512: ebb5bcf9a7d00a32dd1390b727ff4d29330a038423611da01268d8e1d2c0229e52a1098e751d4e6db73ef4ae862e1e96d38249883fcaf12b68f55ebb01035b34
Signed-off-by: Pasta <Pasta@dash.org>
31 -> 32
Signed-off-by: Pasta <Pasta@dash.org>
* Merge #10123: Allow debug logs to be excluded from specified component
3bde556 Add -debugexclude option to switch off logging for specified components (John Newbery)
Tree-SHA512: 30202e3f2085fc2fc5dd4bedb92988f4cb162c612a42cf8f6395a7da326f34975ddc347f82bc4ddca6c84c438dc0cc6e87869f90c7ff88105dbeaa52a947fa43
* bump to uint64_t due to added Dash codes
Signed-off-by: Pasta <Pasta@dash.org>
* bump to uint64_t due to added Dash codes cont.
Signed-off-by: Pasta <Pasta@dash.org>
* string -> BCLog format
Signed-off-by: Pasta <Pasta@dash.org>
* uint32_t -> uint64_t
Signed-off-by: Pasta <Pasta@dash.org>
* Fix CBatchedLogger
* Fix most fDebug-s
* Fix `debug` rpc
* Fix BENCH and RAND conflicts
* Add ALERT and use it
* Update LogPrint-s in dash-specific code
* Tweak few log categories
Specifically:
- use PRIVATESEND in `CPrivateSendClientManager::GetRandomNotUsedMasternode()`
- use ZMQ in `CZMQPublishRawGovernanceVoteNotifier::NotifyGovernanceVote()` and `CZMQPublishRawGovernanceObjectNotifier::NotifyGovernanceObject()`
* Drop no longer used MASTERNODE category
* Merge #10153: logging: Fix off-by-one for shrinkdebugfile default
faab624 logging: Fix off-by-one for shrinkdebugfile (MarcoFalke)
Tree-SHA512: d6153e06067906172ff0611af9e585a3ecf0a7d56925b6ad7c12e75aa802441047059b9b6f6c78e79916c3f2abc8f1998bfd2d5b84201ec6421f727c08da3c21
* Shift dash-specific log categories to start from `1ul << 32` to avoid potential future conflicts with bitcoin ones
* Fix `dash` category
* remove debugCategories
Signed-off-by: Pasta <Pasta@dash.org>
* Prepend "std::" to find call
* Check for BCLog::PRIVATESEND instead of logCategories != BCLog::NONE
* Use BCLog::MNPAYMENTS category instead of checking for logCategories != BCLog::NONE
* Move "End Dash" comment below "ALERT"
When adding new entries here, we'll otherwise get confused with ordering
and might end up forgetting that adding something Dash specific must
continue with the bit after 43.
* Implement IS Double spend notifications in zmq
* copy/paste error
* typo
* Send both conflicting and conflicts against as ZMQ notifications
* CTransaction based not hash based
* @UdjinM6 requested changes
* fix whitespace
* added zmq stuff for governance objects and votes
it seems that zmq is currently not in a working state, need to figure that out.
Need to:
plug in the new methods added
possibly plug in the old methods, as it doesn't look like they are.
* formatting fix. Will probably need to revert for this PR
* continue linking new zmq messages in
* added comment, might need to revert
* fixes error of it not knowing about the classes
* Actually link in, all new govobjects and govvotes should be broadcast over zmq now.
* fix compile error, forgot to change params when copying
* fix compile error
* add imports to the header files in zmqconfig.h
* fixing linking(i think) error
* Revert "added comment, might need to revert"
This reverts commit 2918ea40fe.
* Revert "formatting fix. Will probably need to revert for this PR"
This reverts commit ca10558866.
* fix tabs etc
* EOL added
* optimization of hash.begin() @nmarley thoughts?
* remove formatting changes
* iterator i -> it and removal of notifier
* typo in df879f57
* use auto for the iterators
* introduce hash prefix
* implement changes in zmq_sub.py, update the doc, and change argument name to fix typo
* deref iterators before calling methods
* continued e8a4c505
* missed one... continued e8a4c505
* killing some tabs
* fix spacing for setting or comparing iterators
* change order of new variables to match current setup
* re-add elif's I didn't realize got removed
* Revert "fix spacing for setting or comparing iterators"
This reverts commit 8ce2068148.
* Revert "use auto for the iterators"
This reverts commit cb16cf0760.
* Revert "missed one... continued e8a4c505"
This reverts commit 2087cf894f.
* Revert "continued e8a4c505"
This reverts commit a78c8ad2c9.
* Revert "deref iterators before calling methods"
This reverts commit e8a4c505d1.
* Revert "iterator i -> it and removal of notifier"
This reverts commit 29574248b1.
* Revert "fix whitespace"
This reverts commit 612be48d96.
* Revert "typo in df879f5"
* Revert "Optimization of hash.begin()"
* fixes problem with revert
* Udjin complain's a lot ;)
* help text, init.cpp
* add signals in validationinterface.cpp
* Change location of vote notification call.
* remain consistent
* remove unneeded include due to change of notification location
* implement raw notifications
* Drop nBudgetProposalEstablishingTime
* Refactor: replace `== COutPoint()` with `.IsNull()`
* Refactor: add `operator bool()` to CMasternodePing
* Refactor: actually use `operator bool()` for CPendingDsaRequest
* Refactor: fixing code style in TrafficGraphData
* Fix some comments and whitespaces
* Drop CGovernanceVote::GetTypeHash()
* Drop legacy X11 code
No longer used... if it ever was used at all.
* Move `<boost/foreach.hpp>` out of coins.h
* Simplify CMasternodeBlockPayees::GetRequiredPaymentsString()
Also less of boost::lexical_cast
* Drop CTxDSIn::nSentTimes
* Fix few warnings
* fix warning (timer)
* fix nit
* Remove orphan state wipe from UnloadBlockIndex.
As orphan state is now "network state", like in
d6ea737be1,
UnloadBlockIndex is only used during init if we end up reindexing
to clear our block state so that we can start over. However, at
that time no connections have been brought up as CConnman hasn't
been started yet, so all of the network processing state logic is
empty when its called.
* Move network-msg-processing code out of main to its own file
* Rename the remaining main.{h,cpp} to validation.{h,cpp}
* Zmq sequence (#1)
* Fixes ZMQ startup with bad arguments.
pr 7621
* [ZMQ] append a message sequence number to every ZMQ notification
- pr 7762
- contrib/zmq/zmq_sub.py to python 3 compatible
* typo in MSG_RAWTXLOCK
MMSG_RAWTXLOCK to MSG_RAWTXLOCK
* s/Bitcoind/dashd/
15a6a16 Implement transaction lock zmq notifications
3bc86a6 always push zmqpubhashtxlock even if tx is not from/to our wallet
568315b fix typo
b6d41d2 fix data size for notification name
339be11 implement zmqpubrawtxlock
70f44f9 update zmq_sub.py with hashtxlock and rawtxlock
- removes mapBlockIndex find operation
- theoretically allows removing the cs_main lock during zqm notification while introducing a new file position lock
Continues Johnathan Corgan's work.
Publishing multipart messages
Bugfix: Add missing zmq header includes
Bugfix: Adjust build system to link ZeroMQ code for Qt binaries
