* scripted-diff: Replace #include "" with #include <> (ryanofsky)
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* scripted-diff: Replace #include "" with #include <> (Dash Specific)
-BEGIN VERIFY SCRIPT-
for f in \
src/bls/*.cpp \
src/bls/*.h \
src/evo/*.cpp \
src/evo/*.h \
src/governance/*.cpp \
src/governance/*.h \
src/llmq/*.cpp \
src/llmq/*.h \
src/masternode/*.cpp \
src/masternode/*.h \
src/privatesend/*.cpp \
src/privatesend/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* build: Remove -I for everything but project root
Remove -I from build system for everything but the project root,
and built-in dependencies.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/Makefile.test.include
* qt: refactor: Use absolute include paths in .ui files
* qt: refactor: Changes to make include paths absolute
This makes all include paths in the GUI absolute.
Many changes are involved as every single source file in
src/qt/ assumes to be able to use relative includes.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/qt/dash.cpp
# src/qt/optionsmodel.cpp
# src/qt/test/rpcnestedtests.cpp
* test: refactor: Use absolute include paths for test data files
* Recommend #include<> syntax in developer notes
* refactor: Include obj/build.h instead of build.h
* END BACKPORT #11651 Remove trailing whitespace causing travis failure
* fix backport 11651
Signed-off-by: Pasta <pasta@dashboost.org>
* More of 11651
* fix blockchain.cpp
Signed-off-by: pasta <pasta@dashboost.org>
* Add missing "qt/" in includes
* Add missing "test/" in includes
* Fix trailing whitespaces
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: MeshCollider <dobsonsa68@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* add new quorum type LLMQ_EVONET
* add params for new quorum type LLMQ_EVONET
* add LLMQ_EVONET to devnet llmqs
* allow modifying of LLMQ_EVONET params on startup
* rename LLMQ_EVONET to LLMQ_DEVNET
* Update src/chainparams.cpp
Co-Authored-By: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
* Update src/chainparams.cpp
Co-authored-by: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
2b839ab Update chainparams comment for more info on service bits per dnsseed (Matt Corallo)
62e7642 Fall back to oneshot for DNS Seeds which don't support filtering. (Matt Corallo)
51ae766 Use GetDesireableServiceFlags in static seeds, document this. (Matt Corallo)
fb6f6b1 bluematt's testnet-seed now supports x9 (and is just a static list) (Matt Corallo)
Pull request description:
4440710 broke inserting entries into addrman from dnsseeds which
did not support service bits, as well as static seeds. Static seeds
were already being filtered by UA for 0.13.1+ (ie NODE_WITNESS), so
simply changing the default service bits to include NODE_WITNESS
(and updating docs appropriately) is sufficient. For DNS Seeds, not
supporting NODE_WITNESS is no longer useful, so instead use
non-filtering seeds as oneshot hosts irrespective of named proxy.
I've set my testnet-seed to also support x9, though because it is simply a static host, it may be useful to leave the support off so that it is used as a oneshot to get addresses from a live node instead. I'm fine with either.
Tree-SHA512: 3f17d4d2b0b84d876981c962d2b44cb0c8f95f52c56a48c6b35fd882f6d7a40805f320ec452985a1c0b34aebddb1922709156c3ceccd1b9f8363fd7cb537d21d
* Rename LLMQ_5_60 to LLMQ_TEST
* Introduce -llmqtestparams which allows to modify LLMQ_TEST on regtest
Also add support in DashTestFramework
* Use parameters size=3, threshold=2 as default for LLMQ_TEST
And fall back to the old parameters where necessary
* Wait for all contributions, even when one member is lying
Otherwise we might end up continuing too fast, which would fail the DKG.
* Update src/chainparams.cpp
Co-Authored-By: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
c1be285 chainparams: make supported service bits option explicit (Cory Fields)
d5c7c1c net: use an internal address for fixed seeds (Cory Fields)
6cdc488 net: switch to dummy internal ip for dns seed source (Cory Fields)
6d0bd5b net: do not allow resolving to an internal address (Cory Fields)
7f31762 net: add an internal subnet for representing unresolved hostnames (Cory Fields)
Tree-SHA512: 9bf1042bef546ac3ef0e0d3a9a5555eb21628ff2674a0cf8c6367194b22bfdab477adf452c0e7c56f44e0fb37debc5e14bdb623452e076fb9c492c7702601d7a
c1082a7 Chainparams: Use the factory for pow tests (Jorge Timón)
2351a06 Chainparams: Get rid of CChainParams& Params(std::string) (Jorge Timón)
f87f362 Chainparams: Use a regular factory for creating chainparams (Jorge Timón)
Tree-SHA512: 359c8a2a1bc9d02db7856d02810240ada28048ac088f878b575597a7255cdb0ffdd1a647085ee67a34c6a7e7ed9e6cfdb61240cf6e75139619b640dbb096072c
* Harden DIP3 activation height
Also drop all related but no longer used parts.
* Pass current block index to GetCommitmentsFromBlock
* Allow to change dip3 activation height for tests
And fix them.
* Implement copy_datadir to allow easy copying of state from one node to another
* Instead of starting with a fresh datadir for MNs, reuse a copy of the faucet
* Start masternodes in parallel instead of waiting for the previous to finish
* Allow specifying of window and threshold with -bip9params
* Implement -dip3activationheight for regtests
* Implement fast DIP3 activation in DashTestFramework
* Speed up activation of DIP3 in dip3-deterministicmns.py
* Update qa/rpc-tests/test_framework/test_framework.py
Co-Authored-By: codablock <ablock84@gmail.com>
* Always assign fast_dip3_activation
* Add BIP9 parameters for DIP3 deployment on testnet
* Remove autoix BIP9 deployment and reuse DIP3 deployment
* Add BIP9CheckMasternodesUpgraded to chain params
This controls if miners should check for upgraded masternodes first before
adding BIP9 bits to the block version. This only makes sense in network
where masternodes are up and running before BIP9 activation, which is not
necessarely the case in regtest and devnet.
Also refactor ComputeBlockVersion to use fCheckMasternodesUpgraded instead
of the inverse fAssumeMasternodeIsUpgraded. It is set to false by default
and only set to true in CreateNewBlock.
* Check for upgraded masternodes for DIP3 activation (only mainnet and testnet)
* Bump PROTOCOL_VERSION and DMN_PROTO_VERSION
We probably have nodes with 70211 already running on testnet.
* Allow to use low difficulty and higher block rewards for devnet
Configurable through -minimumdifficultyblocks, -highsubsidyblocks and -highsubsidyfactor
* Fix review comments
* Handle review comments
* support set of keys to sign spork
* several addresses support in -sporkkey
* tests for multykey sporks
* command line option -minsporkkeys
* make spork active only after given number of signers
* use signature in spork hash calculation
* test for new and old spork messages interaction
* add multikeyspork.py to integration tests
* change test to have ability to distinguish default spork value
* require min spork keys number to be more than the half of the common spork keys number
* calc current spork value with majority of signers
* set test nodes time in integration test
* extract keyid from signed spork message directly
* change -sporkaddr option syntax to process several addresses
* codestyle fixes
* fix test comments
* codestyle fixes
* simplify CSporkManager::SporkValueIsActive
* Calc signature hash without signature field
* do not restore pubkey ids from cach
* Calc different keyids to check signature because not all sporks can be synced at moment
* codestyle fixes
* Fix CSporkManager::CheckAndRemove to use several keys
* codestyle fixes
* Correct processing of not actual spork6 value with GetSignerKeyID
* Allow changing budget parameters for regtest
* Lift some limitations for local addresses for masternodes in regtest
Needed to make masternodes works in regtest mode
* Add "masternode check" RPC to force invocation of CheckAndRemove
Useful in integration tests where MN lists must be predictable
* Drop custom logic for delaying GETHEADERS
Reverts "Fix duplicate headers download in initial sync (#1589)" and all following fixes
This reverts commit 169afafd50.
* Fix duplicate initial headers sync
* Switch CNetFulfilledRequestManager and CMasternodeMan maps/funcs to CService
This is to make them work correctly on regtest.
We make sure that behaviour on other networks is not affected though.
* Add fAllowMultiplePorts to chainparams
Tweak either we should allow nodes with the same address and multiple ports or not for this specific chain
* Support passing CKeyID to CMessageSigner/CHashSigner
* Use Dash addresses instead of raw public keys for sporks
The spork addresses are identical to the previously used public keys.
Also use CKeyID/CKey directly inside CSporkManager instead of parsing the
addresses/keys over and over. The default spork key (from chainparams) is
initialized with InitDefaultSporkAddress(). SetPrivKey parses the private
key now and stores it in sporkPrivKey instead of parsing it in
CSporkMessage::Sign().
* Allow setting of spork address via command line
* Remove unused strMasternodePaymentsPubKey chainparam
Traces from the past...
* Review fixes
1. Remove the need for InitDefaultSporkAddress
2. Remove bogus checks for hex private keys
3. Alphabetical order for new include
4. Add . to help string
* Add regtest spork key
As this key is not meant to be private, the private key is also added in
the form of a comment (for later use in regtests)
* Review fixes
* Initial devnet
* Move genesis block adding into its own method
* Introduce -allowprivatenet to lift limitation on RFC1918 addresses
Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed
to be relayed. Also, masternodes won't start when the address is considered
invalid.
This is needed to test local devnet or regtest based networks.
* Lift the requirement of minimum MN age for regtest/devnet
* Implement named devnets
This allows the creation of multiple independent devnets. Each one is
identified by a name which is hardened into a "devnet genesis" block,
which is automatically positioned at height 1. Validation rules will
ensure that a node from devnet=test1 never be able to accept blocks
from devnet=test2. This is done by checking the expected devnet genesis
block.
The genesis block of the devnet is the same as the one from regtest. This
starts the devnet with a very low difficulty, allowing us to fill up
needed balances for masternodes very fast.
Also, the devnet name is put into the sub-version of the VERSION message.
If a node connects to the wrong network, it will immediately be disconnected.
* Allow to select multiple addresses from the same group in devnet/regtest
The selection code normally only allows to select addresses from the same
group (e.g. 192.168.x.x) once. This results in connecting to only a single
node in devnet/regtest.
* Show the devnet name in the title bar and on the loading screen
* Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp
* Remove unused/unneeded scripts from devnet geneses creation
1. OP_RETURN not needed in input script of devnet genesis
2. genesisOutputScript was unused
* Fix copy/paste error in -allowprivatenet description
* Improve -devnet parameter error handling
- Only allow one of -devnet, -regtest or -testnet
- Only allow -devnet=name to be specified once
* Use different datadir for each devnet
* Fix `devnet-devnet` issue
* Fix devnet splashscreen (should use testnet img)
* Avoid passing devNetName around (most of the time)
* Remove nMaxTipAge from CDevNetParams
Not present anymore after rebase on develop
* Fix duplicate headers download in initial sync
Now that initial block download is delayed until the headers sync is done,
it was noticed that the initial headers sync may happen multiple times in
parallel in the case new blocks are announced. This happens because for
every block in INV that is received, a getheaders message is immediately
sent out resulting in a full download of the headers chain starting from
the point of where the initial headers sync is currently at. This happens
once for each peer that announces the new block. This slows down the
initial headers sync and increases the chance of another block being
announced before it is finished, probably leading to the same behavior
as already described, slowing down the sync even more...and so on.
This commit delays sending of GETHEADERS to later in case the chain is too
far behind while a new block gets announced. Header chains will still be
downloaded multiple times, but the downloading will start much closer
to the tip of the chain, so the damage is not that bad anymore.
This ensures that we get all headers from all peers, even if any of them
is on another chain. This should avoid what happened in
https://github.com/bitcoin/bitcoin/pull/8054
which needed to be reverted later.
This fixes the Bitcoin issue https://github.com/bitcoin/bitcoin/issues/6755
* Introduce DelayGetHeadersTime chain param and fix tests
The delaying of GETHEADERS in combination with very old block times in
test cases resulted in the delaying being triggered when the first newly
mined block arrives. This results in a completely stalled sync.
This is fixed by avoiding delaying in when running tests.
* Disconnect peers which are not catched up
Peers which stop sending us headers too early are very likely peers which
did not catch up before and stalled for some reason. We should disconnect
these peers and chose another one to continue.
* HD wallet
Minimal set of changes (no refactoring) backported from Bitcoin upstream to make HD wallets work in Dash 0.12.1.x+
* minimal bip44 (hardcoded account and change)
* minimal bip39
Additional cmd-line options for new wallet:
-mnemonic
-mnemonicpassphrase
* Do not recreate HD wallet on encryption
Adjusted keypool.py test
* Do not store any private keys for hd wallet besides the master one
Derive all keys on the fly.
Original idea/implementation - btc PR9298, backported and improved
* actually use bip39
* pbkdf2 test
* backport wallet-hd.py test
* Allow specifying hd seed, add dumphdseed rpc, fix bugs
- -hdseed cmd-line param to specify HD seed on wallet creation
- dumphdseed rpc to dump HD seed
- allow seed of any size
- fix dumpwallet rpc bug (wasn't decrypting HD seed)
- print HD seed and extended public masterkey on dumpwallet
* top up keypool on HD wallet encryption
* split HD chain: external/internal
* add missing cs_wallet lock in init.cpp
* fix `const char *` issues (use strings)
* default mnemonic passphrase is an empty string in all cases
* store mnemonic/mnemonicpassphrase
replace dumphdseed with dumphdinfo
* Add fCrypted flag to CHDChain
* prepare internal structures for multiple HD accounts
(plus some code cleanup)
* use secure allocator for storing sensitive HD data
* use secure strings for mnemonic(passphrase)
* small fix in GenerateNewHDChain
* use 24 words for mnemonic by default
* make sure mnemonic passphrase provided by user does not exceed 256 symbols
* more usage of secure allocators and memory_cleanse
* code cleanup
* rename: CSecureVector -> SecureVector
* add missing include
* fix warning in rpcdump.cpp
* refactor mnemonic_check (also fix a bug)
* move bip39 functions to CMnemonic
* Few fixes for CMnemonic:
- use `SecureVector` for data, bits, seed
- `Check` should return bool
* init vectors with desired size where possible
42bdf42 Refactor/fix spork:
- move ProcessSpork, GetSporkValue, IsSporkActive, ExecuteSpork and mapSporksActive to CSporkManager
- move Sign, CheckSignature, Relay to CSporkMessage
- move ReprocessBlocks out of sporks to main.cpp / rename DisconnectBlocksAndReprocess to DisconnectBlocks
- rename SporkKey to SporkPubKey
- bugfix: only set strMasterPrivKey if spork signature produced by that key was verified successfully
- few log format changes, cleaned up includes
- use "" account address instead
- remove `collateralPubKey` and `SetCollateralAddress()` from darksend and create `dummyScriptPubkey` and `InitDummyScriptPubkey()` in masternodeman instead
- initialize `dummyScriptPubkey` before loading cache otherwise MNs could be removed because of the invalid tx
get rid of most `if(Params().NetworkIDString() == CBaseChainParams::MAIN)` and alike to unify formulas.
Further improvements will require testnet restart (see TODO notes in changed code) so I'm keeping few things as they are till then.
