Instead of only doing it the first time. This is a preparation for
the new intra-quorum connection system (which connects all members to all
other members)
* scripted-diff: Replace #include "" with #include <> (ryanofsky)
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* scripted-diff: Replace #include "" with #include <> (Dash Specific)
-BEGIN VERIFY SCRIPT-
for f in \
src/bls/*.cpp \
src/bls/*.h \
src/evo/*.cpp \
src/evo/*.h \
src/governance/*.cpp \
src/governance/*.h \
src/llmq/*.cpp \
src/llmq/*.h \
src/masternode/*.cpp \
src/masternode/*.h \
src/privatesend/*.cpp \
src/privatesend/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* build: Remove -I for everything but project root
Remove -I from build system for everything but the project root,
and built-in dependencies.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/Makefile.test.include
* qt: refactor: Use absolute include paths in .ui files
* qt: refactor: Changes to make include paths absolute
This makes all include paths in the GUI absolute.
Many changes are involved as every single source file in
src/qt/ assumes to be able to use relative includes.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/qt/dash.cpp
# src/qt/optionsmodel.cpp
# src/qt/test/rpcnestedtests.cpp
* test: refactor: Use absolute include paths for test data files
* Recommend #include<> syntax in developer notes
* refactor: Include obj/build.h instead of build.h
* END BACKPORT #11651 Remove trailing whitespace causing travis failure
* fix backport 11651
Signed-off-by: Pasta <pasta@dashboost.org>
* More of 11651
* fix blockchain.cpp
Signed-off-by: pasta <pasta@dashboost.org>
* Add missing "qt/" in includes
* Add missing "test/" in includes
* Fix trailing whitespaces
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: MeshCollider <dobsonsa68@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Implement CompactFull() in CDBWrapper
This allows to compact the whole DB in one go.
* Implement more compact version of CDeterministicMNListDiff
This introduces CDeterministicMNStateDiff which requires to only store
fields on-disk which actually changed.
* Avoid writing mnUniquePropertyMap to disk when storing snapshots
This map can be rebuilt by simply using AddMN for each deserialized MN.
* Implement Serialize/Unserialize in CScript
This allows us to directly use READWRITE() on scripts and removes the need
for the ugly cast to CScriptBase. This commit also changes all Dash specific
uses of CScript to not use the cast.
* Keep track of registeration counts and introduce internalID for masternodes
The "internalId" is simply the number of MNs registered so far when the
new MN is added. It is deterministic and stays the same forever.
* Use internalId as keys in MN list diffs
This reduces the used size on-disk.
* Two simple speedups in MN list diff handling
1. Avoid full compare if dmn or state pointers match in BuildDiff
2. Use std::move when adding diff to listDiff in GetListForBlock
* Implement upgrade code for old CDeterministicMNListDiff format to new format
* Track tipIndex instead of tipHeight/tipBlockHash
* Store and pass around CBlockIndex* instead of block hash and height
This allows us to switch CDeterministicMNManager::GetListForBlock to work
with CBlockIndex.
* Refactor CDeterministicMNManager::GetListForBlock to require CBlockIndex*
Instead of requiring a block hash. This allows us to remove blockHash and
prevBlockHash from CDeterministicMNListDiff without the use of cs_main
locks in GetListForBlock.
* Remove prevBlockHash, blockHash and nHeight from CDeterministicMNListDiff
* Remove access to determinisitcMNManager in CMasternodeMetaMan::ToString()
The deterministic MN manager is not fully initialized yet at the time this
is called, which results in an empty list being returned everytime.
* Better logic to determine if an upgrade is needed
Reuse the "best block" logic to figure out if an upgrade is needed. Also
use it to ensure that older nodes are unable to start after the upgrade
was performed.
* Return null block hash if it was requested with getmnlistdiff
* bump CGovernanceManager::SERIALIZATION_VERSION_STRING
* Check SERIALIZATION_VERSION_STRING before deserializing anything else
* Invoke Clear() before deserializing just to be sure
* Sort evo/* source files in Makefile.am
* Keep track of proRegTxHash in CConnman::masternodeQuorumNodes map
We will later need the proRegTxHash
* Fix serialization of std::tuple with const rvalue elements
Having serialization and deserialization in the same specialized template
results in compilation failures due to the "if(for_read)" branch.
* Implement MNAUTH message
This allows masternodes to authenticate themself.
* Protect fresh incoming connections for a second from eviction
Give fresh connections some time to do the VERSION/VERACK handshake and
an optional MNAUTH when it's a masternode. When an MNAUTH happened, the
incoming connection is then forever protected against eviction.
If a timeout of 1 second occurs or the first message after VERACK is not
MNAUTH, the node is not protected anymore and becomes eligable for
eviction.
* Avoid connecting to masternodes if an incoming connection is from the same one
Now that incoming connections from MNs authenticate them self, we can avoid
connecting to the same MNs through intra-quorum connections.
* Apply review suggestions
* Fix warning about size_t to int conversion
* Fix loop in CLLMQUtils::GetQuorumConnections to add at least 2 connections
When reaching very small quorum sizes, the current algorithm results in
only a single connection to be added. This would be fine usually, but is an
issue when this connection fails. We should always have at least one backup
connection.
This fixes simple PoSe test failures where the quorum size gets down to 4
with one of the 4 members being down. If other nodes are unlucky to connect
to this node, they fail as well even though 3 members in a quorum should
work fine.
* Update src/llmq/quorums_utils.cpp
Co-Authored-By: codablock <ablock84@gmail.com>
Instead of trying to manually figure out params for different quorum/ring sizes, connect to nodes at indexes (i+2^k)%n where k: 0..floor(log2(n-1))-1, n: size of the quorum/ring
* Add LLMQ parameters to consensus params
* Add DIP6 quorum commitment special TX
* Implement CQuorumBlockProcessor which validates and handles commitments
* Add quorum commitments to new blocks
* Propagate QFCOMMITMENT messages to all nodes
* Allow special transactions in blocks which have no inputs/outputs
But only for TRANSACTION_QUORUM_COMMITMENT for now.
* Add quorum commitments to self-crafted blocks in DIP3 tests
* Add simple fork logic for current testnet
This should avoid a fork on the current testnet. It only applies to the
current chain which activated DIP3 at height 264000 and block
00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f.
When we revert the chain to retest the DIP3 deployment, this fork logic
can be removed again.
* Use quorumVvecHash instead of quorumHash to make null commitments unique
Implementation of https://github.com/dashpay/dips/pull/31
* Re-add quorum commitments after pruning mempool selected blocks
* Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements
Also add BEGIN/END markers for temporary code.
* Add comments/documentation to LLMQParams
* Move code which determines if a commitment is required into IsCommitmentRequired
This should make the code easier to read and also removes some duplication.
The also changes the error types that are possible from 3 to 2 now. Instead
of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is
only "bad-qc-not-allowed" now.
* Use new parameter from consensus parames for the temporary fork
