* Switch GetQuorumBlockHash from CBlockIndex* to nHeight
* `pindexPrev -> pindex` for ProcessCommitment
* Switch IsCommitmentRequired from CBlockIndex* to block height
* Switch GetMinableCommitment/Tx from CBlockIndex* to block height
* Add `AssertLockHeld(cs_main);`
Co-Authored-By: UdjinM6 <UdjinM6@users.noreply.github.com>
* Add LLMQ parameters to consensus params
* Add DIP6 quorum commitment special TX
* Implement CQuorumBlockProcessor which validates and handles commitments
* Add quorum commitments to new blocks
* Propagate QFCOMMITMENT messages to all nodes
* Allow special transactions in blocks which have no inputs/outputs
But only for TRANSACTION_QUORUM_COMMITMENT for now.
* Add quorum commitments to self-crafted blocks in DIP3 tests
* Add simple fork logic for current testnet
This should avoid a fork on the current testnet. It only applies to the
current chain which activated DIP3 at height 264000 and block
00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f.
When we revert the chain to retest the DIP3 deployment, this fork logic
can be removed again.
* Use quorumVvecHash instead of quorumHash to make null commitments unique
Implementation of https://github.com/dashpay/dips/pull/31
* Re-add quorum commitments after pruning mempool selected blocks
* Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements
Also add BEGIN/END markers for temporary code.
* Add comments/documentation to LLMQParams
* Move code which determines if a commitment is required into IsCommitmentRequired
This should make the code easier to read and also removes some duplication.
The also changes the error types that are possible from 3 to 2 now. Instead
of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is
only "bad-qc-not-allowed" now.
* Use new parameter from consensus parames for the temporary fork
* Add BIP9 parameters for DIP3 deployment on testnet
* Remove autoix BIP9 deployment and reuse DIP3 deployment
* Add BIP9CheckMasternodesUpgraded to chain params
This controls if miners should check for upgraded masternodes first before
adding BIP9 bits to the block version. This only makes sense in network
where masternodes are up and running before BIP9 activation, which is not
necessarely the case in regtest and devnet.
Also refactor ComputeBlockVersion to use fCheckMasternodesUpgraded instead
of the inverse fAssumeMasternodeIsUpgraded. It is set to false by default
and only set to true in CreateNewBlock.
* Check for upgraded masternodes for DIP3 activation (only mainnet and testnet)
* Bump PROTOCOL_VERSION and DMN_PROTO_VERSION
We probably have nodes with 70211 already running on testnet.
* Prepare for DIP3 operator reward payments and switch to array in getblocktemplate
This commit allows to later split MN rewards into multiple recipients, e.g.
the owner reward and operator reward. It also updates the getblocktemplate
output to return an array of MN payments instead of a single entry.
This should allow MN miners and pool operators to prepare themself for the
upcoming changes in regard to operator rewards.
* txoutsMasternode -> voutMasternode
* More renaming
* Consider all masternode payments when looking for a known masternode
011124a Update benchmarking with package statistics (Suhas Daftuar)
42cd8c8 Add benchmarking for CreateNewBlock (Suhas Daftuar)
eed816a Mining: return early when block is almost full (Suhas Daftuar)
Tree-SHA512: c0d8f71e4e0441acf3f4ca12f8705e413b59b323659346a447145653def71710537fb4c6d80cad8e36d68b0aabf19c92e9eab7135a8897b053ed58720856cdda
b4e4ba4 Introduce convenience type CTransactionRef (Pieter Wuille)
1662b43 Make CBlock::vtx a vector of shared_ptr<CTransaction> (Pieter Wuille)
da60506 Add deserializing constructors to CTransaction and CMutableTransaction (Pieter Wuille)
0e85204 Add serialization for unique_ptr and shared_ptr (Pieter Wuille)
c2dd5a3 FIX: correctly measure size of priority block (Alex Morcos)
a278764 FIX: Account for txs already added to block in addPriorityTxs (Alex Morcos)
4dc94d1 Refactor CreateNewBlock to be a method of the BlockAssembler class (Alex Morcos)
* Remove orphan state wipe from UnloadBlockIndex.
As orphan state is now "network state", like in
d6ea737be1,
UnloadBlockIndex is only used during init if we end up reindexing
to clear our block state so that we can start over. However, at
that time no connections have been brought up as CConnman hasn't
been started yet, so all of the network processing state logic is
empty when its called.
* Move network-msg-processing code out of main to its own file
* Rename the remaining main.{h,cpp} to validation.{h,cpp}
* Remove pfrom parameter from ProcessNewBlock
This further decouples ProcessNewBlock from networking/peer logic.
* Replace CValidationState param in ProcessNewBlock with BlockChecked
* Make validationinterface.UpdatedBlockTip more verbose
In anticipation of making all the callbacks out of block processing
flow through it. Note that vHashes will always have something in it
since pindexFork != pindexNewTip.
* Remove duplicate nBlocksEstimate cmp (we already checked IsIBD())
* Remove CConnman parameter from ProcessNewBlock/ActivateBestChain
* Remove SyncWithWallets wrapper function
* Move net-processing logic definitions together in main.h
* Use CValidationInterface from chain logic to notify peer logic
This adds a new CValidationInterface subclass, defined in main.h,
to receive notifications of UpdatedBlockTip and use that to push
blocks to peers, instead of doing it directly from
ActivateBestChain.
* Always call UpdatedBlockTip, even if blocks were only disconnected
* Use BlockChecked signal to send reject messages from mapBlockSource
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
Change the few occurrences of the deprecated `auto_ptr` to c++11 `unique_ptr`.
Silences the deprecation warnings.
Also add a missing `std::` for consistency.
* Changes for getblocktemplate, CreateNewBlock, FillBlockPayee, CreateSuperblock:
- Add support for superblocks in getblocktemplate (+fix miner reward - it was missing)
- Refactor the way masternode payments are passed around, change getblocktemplate format for them too.
b6b6d6c Added nSuperblockStartBlock, adjusted testnet/regtest params
15a3c64 More for governance block checks, p1 (non-compilable):
- add GetPaymentsLimit() and GetPaymentsTotalAmount()
- IsValidBlockHeight() should check nSuperblockStartBlock
- CSuperblock::IsValid should check payment limit and miner payout
- no cs_main
- slightly refactored related things
e8f9e5d More for governance checks, p2 (compilable):
- IsBlockValueValid(), IsBlockPayeeValid() and FillBlockPayee() rewritten, no cs_main for them
- CreateNewBlock adjusted, need more work on CBlockTemplate (see TODO)
- moved (and simplified) IsBlockPayeeValid() call from CheckBlock() to ConnectBlock()
51434cf Add ability to calculate only superblock part of subsidy in GetBlockSubsidy()
aa74200 Fix GetPaymentsLimit()
f7b6234 braces and comment
ade8f64 more checks for IsValidBlockHeight()
