e87fefc test: Add rpc_bind test to default-run tests (Wladimir J. van der Laan)
Pull request description:
Skip the parts that cannot be run on the host due to lack of IPv6 support or a second interface to bind on, and warn appropriately.
Without no strong requirements (besides being Linux only, which will skip the test) left, add this test to the default in test_runner.
~~(the non-IPv6 parts of the two dual-IPv4/6 tests could also be enabled, but first going to look what Travis does here to see if there wasn't another reason it was disabled)~~ done, it only makes sense for the first
Tree-SHA512: 724259b14f59dccc7e61ef071359336adb0f76a63db392b6ce6940e21c8ee0470c35374e82970681261685ef299cd70b0c1372598cea85d341f64c2c40ea28ee
728667b771 scripted-diff: rename TestNode to TestP2PConn in tests (John Newbery)
Pull request description:
Several test scripts define a subclass of P2PInterface called TestNode.
This commit renames those to TestP2PConn since we already have a
TestNode class in the test framework.
Tree-SHA512: fc8472677312ad000560fa491b680a441d05c0fee5f8eea2d031d326d81e56d231c235930c0d09dd10afc98d7255fa9f9309d5e2ae6c252bc188a5951644a5b8
b156ff7c3 [tests] bind functional test nodes to 127.0.0.1 (Sjors Provoost)
Pull request description:
Replaces #12200 which broke `rpc_bind.py`.
Prevents OSX firewall allow-this-application-to-accept-inbound-connections permission popups and is generally safer.
To prevent binding to `127.0.0.1`, set `self.bind_to_localhost_only = False`.
cc @jnewbery
Tree-SHA512: 5e700124c91bd0cbdee83ca44910071d71d61d8842334755b685d14fbff6454d75de1ea7de67340370386f58b41361e80e90bb4dca5c4d5992f9d2b27985f999
…listunspent
fa103a5 [qa] wallet_basic: Specify minimum required amount for listunspent (MarcoFalke)
Pull request description:
A value less than that would fail the tests later on anyway:
```
File "./test/functional/wallet_basic.py", line 250, in run_test
self.nodes[1].sendrawtransaction(signed_raw_tx['hex'])
test_framework.authproxy.JSONRPCException: bad-txns-in-belowout, value in (1.00) < value out (49.998) (code 16) (-26)
Tree-SHA512: 7e72ad02b5623bc078610da06c34721836822a920a4e85b12a1e0f339e3205cdc11d39763197770e649fb73376f922ff91a8f244b465195e50a6798658e04f80
Signed-off-by: pasta <pasta@dashboost.org>
* explicitly check that -disablegovernance is true for pruned mode.
Signed-off-by: pasta <pasta@dashboost.org>
* try to set -disablegovernance and -txindex if pruned mode is enabled
Signed-off-by: pasta <pasta@dashboost.org>
* Adjust InitWarning when governance validation is disabled
Signed-off-by: pasta <pasta@dashboost.org>
* Check for deprecated -litemode earlier
* Move -disablegovernance warning into AppInitParameterInteraction
* Tweak -prune help text and a related comment in AppInitParameterInteraction
* Ignore init warnings in blockchain.py
* Adjust "governance validation disabled" warning depending on if running a pruned node
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Skip init warnings in import-rescan.py and node_network_limited.py
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
ea65182f03 [wallet] loadwallet shouldn't create new wallets. (John Newbery)
Pull request description:
A bug in the initial implementation of loadwallet meant that if the
arguement was a directory that didn't contain a wallet.dat file, a new
wallet would be created in that directory. Fix that so that if a
directory is passed in, it must contain a wallet.dat file.
Bug reported by promag (João Barbosa).
Tree-SHA512: 0a59fa8a33fde51a88544ad288b00e4995284fe16424f643076aaba42b8244fff362145217650ee53d518dfab7efbed4237632c34cdd3dcbbecaa9ecaab5fd7b
Co-authored-by: MarcoFalke <falke.marco@gmail.com>
c8176b3cc7556d7bcec39a55ae4d6ba16453baaa Add linter: Make sure we explicitly open all text files using UTF-8 or ASCII encoding in Python (practicalswift)
634bd970013eca90f4b4c1f9044eec8c97ba62c2 Explicitly specify encoding when opening text files in Python code (practicalswift)
Pull request description:
Add linter: Make sure we explicitly open all text files using UTF-8 encoding in Python.
As requested by @laanwj in #13440.
Tree-SHA512: 1651c00fe220ceb273324abd6703aee504029b96c7ef0e3029145901762c733c9b9d24927da281394fd4681a5bff774336c04eed01fafea997bb32192c334c06
Signed-off-by: pasta <pasta@dashboost.org>
# Conflicts:
# contrib/devtools/circular-dependencies.py
# contrib/linearize/linearize-data.py
# contrib/linearize/linearize-hashes.py
# contrib/seeds/generate-seeds.py
# contrib/verify-commits/verify-commits.py
# test/functional/multiwallet.py
# test/functional/notifications.py
# test/functional/test_runner.py
# test/util/rpcauth-test.py
fa8071a0985700a4641ce77dac2cb2fa285d3afe qa: Log as utf-8 (MarcoFalke)
Pull request description:
Explicitly read and write the log files with utf-8 as encoding
Tree-SHA512: ca28f37f34a09845c736ff6c4c21733c3c39584f52c81e48ff25e5e35979c317d0989862b2b93acc7e359fbcc20b99533365455830b2ddb41eb4d8c17314534e
891beb0 [test] fundrawtransaction: lock watch-only shared address (Karl-Johan Alm)
Pull request description:
`self.nodes[0]` creates an address which is watch-only-shared with `self.nodes[3]`. If `nodes[0]` spends the associated UTXO during any of its sends later, the watchonly test will fail, as `nodes[3]` now has insufficient funds.
I ran into this in #12257 and this commit is in that PR as well, but I figured I'd split it out (and remove from there once/if merged).
Tree-SHA512: d04a04b1ecebe82127cccd47c1b3de311bf07f4b51dff80db20ea2f142e1d5c4a85ed6180c5c0b081d550e238c742e119b953f60f487deac5a3f3536e1a8d9fe
* Change litemode to disablegovernance, this makes it more clear what that flag actually does.
Signed-off-by: pasta <pasta@dashboost.org>
* more fLiteMode to fDisableGovernance
Signed-off-by: pasta <pasta@dashboost.org>
* handle -litemode being set
Signed-off-by: pasta <pasta@dashboost.org>
d8e9a2a Remove "rpc" category from GetWarnings (Wladimir J. van der Laan)
7da3b0a rpc: Move RPC_FORBIDDEN_BY_SAFE_MODE code to reserved section (Wladimir J. van der Laan)
2ae705d Remove Safe mode (Andrew Chow)
Pull request description:
Rebase of #10563. Safe mode was [disabled by default and deprecated in 0.16](https://github.com/bitcoin/bitcoin/blob/master/doc/release-notes/release-notes-0.16.0.md#safe-mode-disabled-by-default), so probably should be removed for 0.17.
> Rationale:
>
> Safe mode is useless. It only disables some RPC commands when large work forks are detected. Nothing else is affected by safe mode. It seems that very few people would be affected by safe mode. The people who use Core as a wallet are primarily using it through the GUI, which safe mode does not effect. In the GUI, transactions will still be made as normal; only a warning is displayed.
>
> I also don't think that we should be disabling RPC commands or any functionality in general. If we do, it should be done consistently, which safe mode is not. If we want to keep the idea of a safe mode around, I think that the current system needs to go first before a new system can be implemented.
Tree-SHA512: 067938f47ca6e879fb6c3c4e21f9946fd7c5da3cde67ef436f1666798c78d049225b9111dc97064f42b3bc549d3915229fa19ad5a634588f381e34fc65d64044
Signed-off-by: pasta <pasta@dashboost.org>
# Conflicts:
# src/Makefile.am
# src/rpc/protocol.h
# src/rpc/rawtransaction.cpp
# src/wallet/rpcdump.cpp
# src/wallet/rpcwallet.cpp
# test/functional/pruning.py
9db48c5634 tests: Remove redundant bytes² (practicalswift)
Pull request description:
This is a follow-up to #12993. As @jnewbery noted `bytes()` is idempotent.
Tree-SHA512: 0eb25e0c2c46f9abaac30f964c5eb422bece1414c840a717d86794424294cb19d995a6db7c8df2a2f4ec84776b05274a637f2c111738f397051f510e57184752
b95f9a6 tests: Remove compatibility code not needed now when we're on Python 3 (practicalswift)
Pull request description:
Remove compatibility code not needed now when we're on Python 3.
Tree-SHA512: adc6422794ee08ee8d4c69268e74f0d3eb97c7d3c26c9573698c3305572f20d4840cf9f79fd6fbbe367699bbd95533f90fb6d8569b9787f3f9ca20a3f4c75dd7
f08761371 Add tests of listreceivedbyaddress address filtering (Jeremy Rubin)
8ee08120d Add address filtering to listreceivedbyaddress (Jeremy Rubin)
Pull request description:
Supersede https://github.com/bitcoin/bitcoin/pull/9503 created by @JeremyRubin , I will maintain it.
Tree-SHA512: 2accaed493b7e1c2eb5cb5270180f100f8c718b6585b9574f294191c318dc622a79e42ac185300f291f82d3b2a6f1c00850b6b17e4ff2dbab94d71df695acbfe
fa3528a85b qa: Fix some tests to work on native windows (MarcoFalke)
Pull request description:
This allows some more tests to be run natively on Windows
Tree-SHA512: 8097a82dc046be9f6bb0da634758c9afef7836960ca7a1f88f9acab9512dbf7bc26525b515faae407edab4620846cce2b427940298f822e250f23f924b4c7591
fa1e69e qa: Sync with validationinterface queue in sync_mempools (MarcoFalke)
Pull request description:
Commit e545dedf72 moved `TransactionAddedToMempool` to the background scheduler thread. Thus, adding a transaction to the mempool will no longer add it to the wallet immediately. Functional tests, that `sync_mempools` and then call into wallet rpcs will race against the scheduler thread.
Fix that race by flushing the scheduler queue.
Fixes#12205; Fixes#12171;
References #9584;
Tree-SHA512: 14d99cff9c4756de9fad412f04e6d8e25bb9a0938f24ed8348de79df5b4ee67763dac5214b1a69e77e60787d81ee642976d1482b1b5637edfc4892a238ed22af
1e2e09e2f6 Fix intermittent failure in p2p-versionbits-warning.py (John Newbery)
3bbd843708 Improve comments/logging in p2p-versionbits-warning.py (John Newbery)
ef2beb2c13 Fix flake8 warnings in p2p-versionbits-warning.py (John Newbery)
Pull request description:
fixes#12259 (and tidies up the test)
The problem was that the node was still in IBD at the point the last block was generated. UpdateTip() will not generate a warning if the node is still in IBD:
cc5870a405/src/validation.cpp (L2151)
The 'proper' fix would be to remove the overenthusiastic latching in DoWarning:
cc5870a405/src/validation.cpp (L2135)
so that more than one warning message can be output to `alertnotify`. Really we should suppress multiple messages of the same type, but allow messages to be output if they're for different warnings. That would mean the test wouldn't need to stop-start the node.
Tree-SHA512: 5c9aa5af7eba3c1350ea28482d57d3d79e3166c6224ceddb5d5a631090081d890d7403015e41f413c22990959a488cf1231f88bb825c54a609b24f89c450a1f6
fa796bb qa: Add missing syncwithvalidationinterfacequeue to tests (MarcoFalke)
Pull request description:
Fixes intermittent travis failures with those tests caused by a missing flush of mempool txes to the wallet.
Tree-SHA512: 4f57c93a81af9c07b36c16996bf3e6bbb2af61779f0d6ae0126b64563eb4ec4b53f64241c9cf4c3f322db56f4339fd939319747653bebc93bbc7e3d5dceedda6
b0fec8d623 Append scripts to new test_list array to fix bad assignment (Jeff Rade)
Pull request description:
Fixes review by @MarcoFalke in PR [#12437](https://github.com/bitcoin/bitcoin/pull/12437)
Assignment of `test_list` would point to the same array object as `BASE_SCRIPT` or `ALL_SCRIPTS` which we do not want.
Tree-SHA512: 57d6c1f4563aaffbac68e96782283799b10be687292152d70ffbbc22e7b52c11c1af0c483acb01c69fbaa99bdae01431b65a5d1d0a913d549f58dfd95d0d28d9
97bcd36811 [Trivial] Simplify if-else blocks and more descriptive variable naming (Jeff Rade)
Pull request description:
Was looking through `test_runner.py` to start work on [#11964](https://github.com/bitcoin/bitcoin/issues/11964). Made a few changes to make the file more readable and keep these separate from future PR.
Tree-SHA512: 7508f4ee39672d18718d8f80b61b89918eac7b4c75953682b812b73013f18ebd81adc7953f3b6c98c5c598adeb1998f5455f123b5566d1cc03631c7924b4103a
fa795cf wallet: Disallow abandon of conflicted txes (MarcoFalke)
Pull request description:
Abandon transactions that are already conflicted is a noop, so don't try and return false/throw instead.
Tree-SHA512: fd2af4149bd2323f7f31fe18685c763790b8589319b4e467b464ab456d5e8971501ab16d124e57a22693666b06ae433ac3e59f0fd6dfbd2be2c6cae8be5bcbd8
a9d0ebc262 Enable flake8 warnings for all currently non-violated rules (practicalswift)
4cbab15e75 tests: Fix accidental redefinition of previously defined variable via list comprehension (practicalswift)
0b9207efbe Enable flake8 warning for "list comprehension redefines 'foo' from line N" (F812) (practicalswift)
Pull request description:
* Enable `flake8` warnings for all currently non-violated rules
* Fix accidental redefinition via list comprehension
Tree-SHA512: 738b87789e99d02abb2c6b8ff58f65c0cbfeb93e3bf320763e033e510ebd0a4f72861bc8faaf42c14a056a5d4659c33dc70a63730a32cc15159559427bf21193
ada1af6d8f Fix typo in test_runner.py causing error (MeshCollider)
Pull request description:
In the case that a test fails, the typo in run_tests() (introduced in #11858) will cause an error rather than printing out the combined logs, hiding the cause of the failure.
Tree-SHA512: 7d7aa406d92750320ed20610cc5f174cdc94086f630af8c0c4db2003497132e0c56d59b94312fb42ad4507904a2fa858226a4a9337450930bf206183fc35c0a0
faefd29 qa: Prepare functional tests for Windows (MarcoFalke)
Pull request description:
* Pass `sys.executable` when calling a python script via the subprocess
module
* Don't remove the log file while it is still open and written to
* Properly use os.pathsep and os.path.sep when modifying the PATH
environment variable
* util-tests: Use os.path.join for Windows compatibility
Ref: #8227
Tree-SHA512: c507a536af104b3bde4366b6634099db826532bd3e7c35d694b5883c550920643b3eab79c76703ca67e1044ed09979e855088f7324321c8d52112514e334d614
faac7a2db4f9f511c901cb1b4d4e7c599b92884f qa: Avoid checking reject code for now (MarcoFalke)
Pull request description:
The node will often disconnect before sending a reject code. A more
robust solution would be to read from the debug log. See #13006
Tree-SHA512: 1dabf8a43dabbc722f4ffe4fbc1f870090253a66290b2d1a95e7a24e14c6442b493c314480c0314587164eb65e5d468aa9eb5e107ad90bb3ca821a97ea4d373c
8b2ef27 tests: Test connecting with non-existing RPC cookie file (practicalswift)
a2b2476 tests: Test connecting to a non-existing server (practicalswift)
de04fde bitcoin-cli: Provide a better error message when bitcoind is not running (practicalswift)
Pull request description:
Provide a better `bitcoin-cli` error message when `bitcoind` is not running.
Before this patch:
```
$ killall -9 bitcoind
$ bitcoin-cli -testnet echo 'hello world'
error: Could not locate RPC credentials. No authentication cookie could be found, and RPC password is not set. See -rpcpassword and -stdinrpcpass. Configuration file: (/root/.bitcoin/bitcoin.conf)
```
After this patch:
```
$ killall -9 bitcoind
$ bitcoin-cli -testnet echo 'hello world'
error: Could not connect to the server 127.0.0.1:18332
Make sure the bitcoind server is running and that you are connecting to the correct RPC port.
```
Tree-SHA512: bb16e1a9a1ac110ee202c3cb99b5d7c5c1e5487a17e6cd101e12dc69e9525c14dc71f37b128c26ad615369a57547f15d0f1e29b207c1b2f2ee4b4ba7105f3433
Signed-off-by: Pasta <pasta@dashboost.org>
f98b54352 Only call NotifyBlockTip when the active chain changes (James O'Beirne)
152b7fb25 [tests] Add a (failing) test for waitforblockheight (James O'Beirne)
Pull request description:
This is a subset of the more controversial https://github.com/bitcoin/bitcoin/pull/12407, but this also adds a test demonstrating the bug.
In InvalidateBlock, we're calling NotifyBlockTip with the now-invalid block's prev regardless of what chain the ancestor block is on. This could create numerous issues, but it at least screws up `waitforblockheight` (or anything else relying on `rpc/blockchain.cpp:latestblock`) when InvalidateBlock is called on a block not in chainActive, which can happen via RPC.
Only call NotifyBlockTip when the block being marked invalid is on the active chain.
Tree-SHA512: 9a54fe5e8c7eb489daf5df4483c0986129e871e2ca931a456ba869ecb5d5a8d4f7bd27ccc9e711e9292c9ed79ddef896c85d0e81fc76883503e327995b0e914f
fac70134a rpc: Update createrawtransaction examples (MarcoFalke)
fa06dfce0 [rpc] createrawtransaction: Accept sorted outputs (MarcoFalke)
8acd25d85 rpc: Allow typeAny in RPCTypeCheck (MarcoFalke)
Pull request description:
The second parameter of the `createrawtransaction` is a dictionary of the outputs. This comes with at least two drawbacks:
* In case of duplicate keys, either of them might silently disappear, with no user feedback at all. A user needs to make other mistakes, but this could eventually lead to abnormal tx fees.
* A dictionary does not guarantee that keys are sorted. Again, a user needs to keep this in mind, as it could eventually lead to excessive tx fees.
Even though my scenario of loss-of-funds is unlikely to happen, I see it as a inconvenience that should be fixed.
Tree-SHA512: cd562f34f7f9f79c7d3433805971325c388c2035611be283980f4049066a622df4f0afdc11d7ac96662260ec0115147cb65e1ab5268f5a1b063242f3fe425f77
1dfb4e7d7 [Tests] Check output of parent/child tx list from getrawmempool, getmempooldescendants, getmempoolancestors, and REST interface (Conor Scott)
fc44cb108 [RPC] Add list of child transactions to verbose output of getrawmempool (Conor Scott)
Pull request description:
`bitcoin-cli getrawmempool true` only lists a transaction's parents in the `depends` field. This change adds a `spentby` field to the json response, which lists the transaction's children in the mempool.
Currently the only way to find child transactions is to use `getrawmempool` or make another call to `getmempooldescendants` and search the response for transactions that list the parent_txid in the `depends` list, which is inefficient.
This change allows direct lookup of children.
Example Output
```
"9a9b5733c0d89f207908cfa3fe17809bee71f629aa095c9f8754524e29e98ba4": {
...other geterawmempool data...
"wtxid": "9a9b5733c0d89f207908cfa3fe17809bee71f629aa095c9f8754524e29e98ba4",
"depends": [
"bdd92851d5766a42aeb62af667bb422a116cab4e032bba5e3dd6efe5b4b40aa0"
],
"spentby": [
"dc5d3ec388a9121421208738a041ac30a22163bc2e17758f2275b6c51a15ba7b"
]
},
```
Tree-SHA512: 83da7d421c9799a40ef65af3b7fdb586d6d87385f3f2ede3afd2c311725444b858f9d91cc110422a0fa31905779934fee07211ca6fe6b746792b83692c94b3ce
48b37db50 make peertimeout a debug argument, remove error message translation (Zain Iqbal Allarakhia)
8042bbfbf p2p: allow p2ptimeout to be configurable, speed up slow test (Zain Iqbal Allarakhia)
Pull request description:
**Summary:**
1. _Primary_: Adds a `debug_only=true` flag for peertimeout, defaults to 60 sec., the current hard-coded setting.
2. _Secondary_: Drastically speeds up `p2p_timeout.py` test.
3. _Secondary_: Tests that the correct code path is being tested by adding log assertions to the test.
**Rationale:**
- P2P timeout was hard-coded: make it explicitly specified and configurable, instead of a magic number.
- Addresses #13518; `p2p_timeout.py` takes 4 sec. to run instead of 61 sec.
- Makes `p2p_timeout.py` more explicit. Previously, we relied on a comment to inform us of the timeout amount being tested. Now it is specified directly in the test via passing in the new arg; `-peertimeout=3`.
- Opens us up to testing more P2P scenarios; oftentimes slow tests are the reason we don't test.
**Locally verified changes:**
_With Proposed Change (4.7 sec.):_
```
$ time ./test/functional/p2p_timeouts.py
2018-11-19T00:04:19.077000Z TestFramework (INFO): Initializing test directory /tmp/testhja7g2n7
2018-11-19T00:04:23.479000Z TestFramework (INFO): Stopping nodes
2018-11-19T00:04:23.683000Z TestFramework (INFO): Cleaning up /tmp/testhja7g2n7 on exit
2018-11-19T00:04:23.683000Z TestFramework (INFO): Tests successful
real 0m4.743s
```
_Currently on master (62.8 sec.):_
```
$ time ./test/functional/p2p_timeouts.py
2018-11-19T00:06:10.948000Z TestFramework (INFO): Initializing test directory /tmp/test6mo6k21h
2018-11-19T00:07:13.376000Z TestFramework (INFO): Stopping nodes
2018-11-19T00:07:13.631000Z TestFramework (INFO): Cleaning up /tmp/test6mo6k21h on exit
2018-11-19T00:07:13.631000Z TestFramework (INFO): Tests successful
real 1m2.836s
```
_Error message demonstrated for new argument `-peertimeout`:_
```
$ ./bitcoind -peertimeout=-5
...
Error: peertimeout cannot be configured with a negative value.
```
Tree-SHA512: ff7a244ebea54c4059407bf4fb86465714e6a79cef5d2bcaa22cfe831a81761aaf597ba4d5172fc2ec12266f54712216fc41b5d24849e5d9dab39ba6f09e3a2a
4d9b4256d8 Fix typos (Dimitris Apostolou)
Pull request description:
Unfortunately I messed up my repo while trying to squash #12593 so I created a PR with just the correct fixes.
Tree-SHA512: 295d77b51bd2a9381f1802c263de7ffb2edd670d9647391e32f9a414705b3c8b483bb0e469a9b85ab6a70919ea13397fa8dfda2aea7a398b64b187f178fe6a06
Signed-off-by: pasta <pasta@dashboost.org>
* Trivial Dashification
* Tweak getnetworkinfo and dumpwallet help text
We don't have RBF and Segwit
* CopyrightHolders should also check for missing "Dash Core" copyright
e710387ca9 test: Fix bip68 sequence test to reflect updated rpc error message (Ben Woosley)
Pull request description:
The message changed in #12356, but this test is in the extended test suite, so it didn't fail on CI.
Tree-SHA512: ce800e2636ab7bbba7876aa533e1684e75c37a7d2a119f9c4602fd89ac9215e2e28710a1f27feb642b6737ed858da049ebc52fdd476ff4637e3ac3bb1d8399ce
55f89da1a Don't test against the mempool min fee information in mempool_limit.py (Ben Woosley)
Pull request description:
Because the right-hand side of this comparison can be influenced
externally, e.g. via the -maxmempool argument, the existing mempool state,
host memory usage, etc.
Called out by @MarcoFalke here: https://github.com/bitcoin/bitcoin/pull/12356#discussion_r170094948
Tree-SHA512: 1644cb8046a6953fb93423a5e51af4f5c7d00a35f10389fddd6a823dae6f31ab367b53af70b3b69161adb9c48f57cf4772db7f4610fd7aadd9c0e9b3da17e9f8
bb00c95 Consistently use FormatStateMessage in RPC error output (Ben Woosley)
8b8a1c4 Add test for 'mempool min fee not met' rpc error (Ben Woosley)
c04e0f6 Fix 'mempool min fee not met' debug output (Ben Woosley)
Pull request description:
Output the value that is tested, rather than the unmodified fee value.
Prompted by looking into: #11955
Tree-SHA512: fc0bad47d4af375d208f657a6ccbad6ef7f4e2989ae2ce1171226c22fa92847494a2c55cca687bd5a1548663ed3313569bcc31c00d53c0c193a1b865dd8a7657
db1cbcc [RPC] Remove deprecated addmultisigaddress return format (John Newbery)
cb28a0b [RPC] Remove deprecated createmultisig object (John Newbery)
ed45c82 [tests] Remove test for deprecated createmultsig option (John Newbery)
d066a1c [rpc] Remove deprecated getmininginfo RPC option (John Newbery)
c6f09c2 [rpc] remove deprecated estimatefee RPC (John Newbery)
a8e437a [tests] Remove estimatefee from rpc_deprecated.py test (John Newbery)
a5623b1 [tests] Remove tests for deprecated estimatefee RPC (John Newbery)
d119f2e [tests] Fix style warnings in feature_fee_estimation.py (John Newbery)
Pull request description:
There were some RPC/RPC options deprecated in v0.16. Those can now be removed from master since v0.16 has been branched.
- `estimatefee` RPC has been removed. The `feature_fee_estimation.py` test has been updated to remove the RPC, but doesn't yet have good coverage of the replacement RPC `estimatesmartfee`. Improving the test coverage should be done in a new PR. (#11031)
- the `errors` field returned by `getmininginfo` has been deprecated and replaced by a `warning` field. (#10858)
- providing addresses as inputs to `createmultisig` has been deprecated. Users should use `addmultisigaddress` instead (#11415)
- The return format from `addmultisigaddress` has changed (#11415)
`getwitnessaddress` was also deprecated in v0.16 and can be removed, but many tests are using that RPC, so it's a larger job to remove. It should be removed in a separate PR (possibly after #11739 and #11398 have been merged and the segwit test code tidied up)
Tree-SHA512: 8ffaa5f6094131339b9e9e468e8b141de4b144697d2271efa2992b80b12eb97849ade3da8df5c1c9400ed4c04e6a029926550a3e5846d2029b644f9e84ac7124
7444149 Document method for reviewers to verify chainTxData (John Newbery)
Pull request description:
This commit adds the final block hash of the window to getchaintxstats
and documents how reviewers can verify changes to chainTxData.
Tree-SHA512: d16abb5f47d058e52660f4d495f1e453205b1b83716d7c810ff62a70338db721386c1808ec1fc8468f514e4d80cc58e3c96eeb3184cbbcb1d07830fa5e53f342
fa74d3d720 qa: Remove unused deserialization code in msg_version (MarcoFalke)
fa5099ceb7 p2p: Remove dead code for nVersion=10300 (MarcoFalke)
Pull request description:
This code is undocumented and confusing as well as dead, since peers with a version that old are disconnected immediately.
Tree-SHA512: 58c131a2730b630ffdc191cd65fe736ed1bd57e184902e2af1b1399443c4654617e68774432016df023434055e85d2e8cd32fb03b40c508c3bb8db6d19427434
* Merge #11415: [RPC] Disallow using addresses in createmultisig
1df206f Disallow using addresses in createmultisig (Andrew Chow)
Pull request description:
This PR should be the last part of #7965.
This PR makes createmultisig only accept public keys and marks the old functionality of accepting addresses as deprecated.
It also splits `_createmultisig_redeemscript` into two functions, `_createmultisig_getpubkeys` and `_createmultisig_getaddr_pubkeys`. `_createmultisig_getpubkeys` retrieves public keys from the RPC parameters and `_createmultisig_getaddr_pubkeys` retrieves addresses' public keys from the wallet. `_createmultisig_getaddr_pubkeys` requires the wallet and is only used by `addwitnessaddress` (except when `createmultisig` is used in deprecated mode).
`addwitnessaddress`'s API is also changed. Instead of returning just an address, it now returns the same thing as `createmultisig`: a JSON object with two fields, address and redeemscript.
Tree-SHA512: a5796e41935ad5e47d8165ff996a8b20d5112b5fc1a06a6d3c7f5513c13e7628a4fd37ec30fde05d8b15abfed51bc250710140f6834b13f64d0a0e47a3817969
* fix backport
Signed-off-by: pasta <pasta@dashboost.org>
* fix backport
Signed-off-by: pasta <pasta@dashboost.org>
* fix backport
Signed-off-by: pasta <pasta@dashboost.org>
* Dashify
Co-authored-by: dustinface <35775977+xdustinface@users.noreply.github.com>
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: dustinface <35775977+xdustinface@users.noreply.github.com>
* 🪲 improve evodb consistency recovering from dbcrash
* Adjust the fix
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Fix it
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Disable recovery from a crash during a fork and a corresponding part of dbcrash.py
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Skip some checks in CQuorumBlockProcessor when replaying blocks after the crash
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Process special txes in RollforwardBlock
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Update src/init.cpp
Co-authored-by: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
cd53981 [docs] Add release notes for `loadwallet` RPC. (John Newbery)
a46aeb6 [wallet] [tests] Test loadwallet (John Newbery)
5d15260 [wallet] [rpc] Add loadwallet RPC (John Newbery)
876eb64 [wallet] Pass error message back from CWallet::Verify() (John Newbery)
e0e90db [wallet] Add CWallet::Verify function (John Newbery)
470316c [wallet] setup wallet background flushing in WalletInit directly (John Newbery)
59b87a2 [wallet] Fix potential memory leak in CreateWalletFromFile (John Newbery)
Pull request description:
Adds a `loadwallet` RPCs. This allows wallets to be loaded dynamically during runtime without having to stop-start the node with new `-wallet` params.
Includes functional tests and release notes.
Limitations:
- currently this functionality is only available through the RPC interface.
- wallets loaded in this way will not be displayed in the GUI.
Tree-SHA512: f80dfe32b77f5c97ea3732ac538de7d6ed7e7cd0413c2ec91096bb652ad9bccf05d847ddbe81e7cd3cd44eb8030a51a5f00083871228b1b9b0b8398994f6f9f1
c25321f Add config changes to release notes (Anthony Towns)
5e3cbe0 [tests] Unit tests for -testnet/-regtest in [test]/[regtest] sections (Anthony Towns)
005ad26 ArgsManager: special handling for -regtest and -testnet (Anthony Towns)
608415d [tests] Unit tests for network-specific config entries (Anthony Towns)
68797e2 ArgsManager: Warn when ignoring network-specific config setting (Anthony Towns)
d1fc4d9 ArgsManager: limit some options to only apply on mainnet when in default section (Anthony Towns)
8a9817d [tests] Use regtest section in functional tests configs (Anthony Towns)
30f9407 [tests] Unit tests for config file sections (Anthony Towns)
95eb66d ArgsManager: support config file sections (Anthony Towns)
4d34fcc ArgsManager: drop m_negated_args (Anthony Towns)
3673ca3 ArgsManager: keep command line and config file arguments separate (Anthony Towns)
Pull request description:
The weekly meeting on [2017-12-07](http://www.erisian.com.au/meetbot/bitcoin-core-dev/2017/bitcoin-core-dev.2017-12-07-19.00.log.html) discussed allowing options to bitcoin to have some sensitivity to what network is in use. @theuni suggested having sections in the config file:
<cfields> an alternative to that would be sections in a config file. and on the
cmdline they'd look like namespaces. so, [testnet] port=5. or -testnet::port=5.
This approach is (more or less) supported by `boost::program_options::detail::config_file_iterator` -- when it sees a `[testnet]` section with `port=5`, it will treat that the same as "testnet.port=5". So `[testnet] port=5` (or `testnet.port=5` without the section header) in bitcoin.conf and `-testnet.port=5` on the command line.
The other aspect to this question is possibly limiting some options so that there is no possibility of accidental cross-contamination across networks. For example, if you're using a particular wallet.dat on mainnet, you may not want to accidentally use the same wallet on testnet and risk reusing keys.
I've set this up so that the `-addnode` and `-wallet` options are `NETWORK_ONLY`, so that if you have a bitcoin.conf:
wallet=/secret/wallet.dat
upnp=1
and you run `bitcoind -testnet` or `bitcoind -regtest`, then the `wallet=` setting will be ignored, and should behave as if your bitcoin.conf had specified:
upnp=1
[main]
wallet=/secret/wallet.dat
For any `NETWORK_ONLY` options, if you're using `-testnet` or `-regtest`, you'll have to add the prefix to any command line options. This was necessary for `multiwallet.py` for instance.
I've left the "default" options as taking precedence over network specific ones, which might be backwards. So if you have:
maxmempool=200
[regtest]
maxmempool=100
your maxmempool will still be 200 on regtest. The advantage of doing it this way is that if you have `[regtest] maxmempool=100` in bitcoin.conf, and then say `bitcoind -regtest -maxmempool=200`, the same result is probably in line with what you expect...
The other thing to note is that I'm using the chain names from `chainparamsbase.cpp` / `ChainNameFromCommandLine`, so the sections are `[main]`, `[test]` and `[regtest]`; not `[mainnet]` or `[testnet]` as might be expected.
Thoughts? Ping @MeshCollider @laanwj @jonasschnelli @morcos
Tree-SHA512: f00b5eb75f006189987e5c15e154a42b66ee251777768c1e185d764279070fcb7c41947d8794092b912a03d985843c82e5189871416995436a6260520fb7a4db
be8ab7d08 Create new wallet databases as directories rather than files (Russell Yanofsky)
26c06f24e Allow wallet files not in -walletdir directory (Russell Yanofsky)
d8a99f65e Allow wallet files in multiple directories (Russell Yanofsky)
Pull request description:
This change consists of three commits:
* The first commit is a pure refactoring that removes the restriction that two wallets can only be opened at the same time if they are contained in the same directory.
* The second commit removes the restriction that `-wallet` filenames can only refer to files in the `-walletdir` directory.
* The third commit makes second commit a little safer by changing bitcoin to create wallet databases as directories rather than files, so they can be safely backed up.
All three commits should be straightforward:
* The first commit adds around 20 lines of new code and then updates a bunch of function signatures (generally updating them to take plain fs::path parameters, instead of combinations of strings, fs::paths, and objects like CDBEnv and CWalletDBWrapper).
* The second commit removes two `-wallet` filename checks and adds some test cases to the multiwallet unit test.
* The third commit just changes the mapping from specified wallet paths to bdb environment & data paths.
---
**Note:** For anybody looking at this PR for the first time, I think you can skip the comments before _20 Nov_ and start reading at https://github.com/bitcoin/bitcoin/pull/11687#issuecomment-345625565. Comments before _20 Nov_ were about an earlier version of the PR that didn't include the third commit, and then confusion from not seeing the first commit.
Tree-SHA512: 00bbb120fe0df847cf57014f75f1f7f1f58b0b62fa0b3adab4560163ebdfe06ccdfff33b4231693f03c5dc23601cb41954a07bcea9a4919c8d42f7d62bcf6024
* Merge #10387: Eventually connect to NODE_NETWORK_LIMITED peers
eb91835 Add setter for g_initial_block_download_completed (Jonas Schnelli)
3f56df5 [QA] add NODE_NETWORK_LIMITED address relay and sync test (Jonas Schnelli)
158e1a6 [QA] fix mininode CAddress ser/deser (Jonas Schnelli)
fa999af [QA] Allow addrman loopback tests (add debug option -addrmantest) (Jonas Schnelli)
6fe57bd Connect to peers signaling NODE_NETWORK_LIMITED when out-of-IBD (Jonas Schnelli)
31c45a9 Accept addresses with NODE_NETWORK_LIMITED flag (Jonas Schnelli)
Pull request description:
Eventually connect to peers signalling NODE_NETWORK_LIMITED if we are out of IBD.
Accept and relay NODE_NETWORK_LIMITED peers in addrman.
Tree-SHA512: 8a238fc97f767f81cae1866d6cc061390f23a72af4a711d2f7158c77f876017986abb371d213d1c84019eef7be4ca951e8e6f83fda36769c4e1a1d763f787037
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/init.cpp
# src/protocol.h
# test/functional/node_network_limited.py
* remove witness
Signed-off-by: Pasta <pasta@dashboost.org>
* fix test expecting witness flag
Signed-off-by: Pasta <pasta@dashboost.org>
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
75848bcf40 [tests] Fix p2p_sendheaders race (John Newbery)
Pull request description:
p2p_sendheaders has a race in part 1.3.
part 1.2 sends a block to the node over the 'test_node' connection, but
doesn't wait for an inv to be received on the 'inv_node' connection. If
we get to part 1.3 before that inv has been received, then the
subsequent call to check_last_inv_announcement could fail.
Tree-SHA512: ba9baffb3a9c0d379259190c737a7a4ad2e1133005a5b026af4f6b67a2978e24db39289551ad29134151879593ef5472be7e569a3557c0740fb51f5c56263d9a
Co-authored-by: MarcoFalke <falke.marco@gmail.com>
* Take all nodes into account in check_sigs instead of just just masternodes
Checking only masternodes might result in wait_for_sigs returning too early
when waiting for signatures to get cleaned up, so that node0 still has
the signature locally and thus does not fully re-process new signatures.
* Make sure node0 has received qsendrecsigs from the previously isolated node
* Merge #13134: net: Add option `-enablebip61` to configure sending of BIP61 notifications
87fe292d897e09e176ac7e254144466c319cc9ac doc: Mention disabling BIP61 in bips.md (Wladimir J. van der Laan)
fe16dd8226d924f44432c5b5014aa49ff45c82ff net: Add option `-enablebip61` to configure sending of BIP61 notifications (Wladimir J. van der Laan)
Pull request description:
This commit adds a boolean option `-peersendreject`, defaulting to `1`, that can be used to disable the sending of [BIP61](https://github.com/bitcoin/bips/blob/master/bip-0061.mediawiki) `reject` messages. This functionality has been requested for various reasons:
- security (DoS): reject messages can reveal internal state that can be used to target certain resources such as the mempool more easily.
- bandwidth: a typical node sends lots of reject messages; this counts against upstream bandwidth. Also the reject messages tend to be larger than the message that was rejected.
On the other hand, reject messages can be useful while developing client software (I found them indispensable while creating bitcoin-submittx), as well as for our own test cases, so whatever the default becomes on the long run, IMO the functionality should be retained as option. But that's a discussion for later, for now it's simply a node operator decision.
Also adds a RPC test that checks the functionality.
Tree-SHA512: 9488cc53e13cd8e5c6f8eb472a44309572673405c1d1438c3488f627fae622c95e2198bde5ed7d29e56b948e2918bf1920239e9f865889f4c37c097c37a4d7a9
* 0.17 -> 0.16
Signed-off-by: Pasta <pasta@dashboost.org>
* tx1 -> base_ tx fixing 13134
Signed-off-by: Pasta <pasta@dashboost.org>
* move added bip61 message checking up
Signed-off-by: Pasta <pasta@dashboost.org>
* Dash specific code, only send reject messages if bip61 is enabled
Signed-off-by: Pasta <pasta@dashboost.org>
* Fix invalidtxrequest.py
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Instead of using the initial value. This removes the need for manually
passing of -mocktime when restarting nodes.
It also fixes a few flaky test cases where nodes are getting restarted.
And really only check inbound connections for recent probes. Also bump
mocktime by an hour in llmq-simplepose.py.
This fixes flakiness of llmq-simplepose.py.
89e70f9d7fe384ef9de4fa3828d4c80523290186 Fix that CWallet::AbandonTransaction would only traverse one level (Ben Woosley)
Pull request description:
Prior to this change, it would mark only the first layer of
child transactions abandoned, due to always following the input `hashTx`
rather than the current `now` tx.
Tree-SHA512: df068b49637d299ad73237c7244005fe5aa966d6beae57aff12e6948f173d9381e1b5d08533f7e3a1416991ed57f9f1f7b834057141d85c07dc60bb1f0872cea
fa865efa4a qa: Fix wallet_listreceivedby race (MarcoFalke)
Pull request description:
Generating a block on node 0 will only get node 0 out of IBD and not node 1. So the inv for the `txid` is dropped by node 1 and the call to `sync_all` fails.
Solve it by a call to `sync_blocks` after `generate`.
Tree-SHA512: e21b01a9e8c90bd6a3aad290c97cc4866ab384e22797b318eed55ae2767512203597d3a184b23ad5a3fe76bdbb8a3d5c51e097d56b160232851164434059ff23
12d1b77f7e [tests] Fixed intermittent failure in p2p_sendheaders.py. (lmanners)
Pull request description:
Added handling for the case where headers are announced over more than one message.
refs #12453
Tree-SHA512: 2c5b48ff019089b86e358181ba170d3aac09d4ae41ec79c2718e0ee83705860501bbcb8fd94d0f5c4f86c0d54a96781a967716621bb8c5ecc991b39af3cec506
When we bumped before the call, it sometimes happened that in the following
loop one of the early nodes which got the network reactivated tried to
connect to one of the latter nodes with still disabled network. Such
connection attempts were dropped by the latter nodes and the retry
throttling then prevented the connection to be retried later. Doing the
bumping after setnetworkactive(True) should fix this.
de23739b22 test: Fix rpc_net.py "pong" race condition (Ben Woosley)
Pull request description:
Prior to this change, the test fails with KeyError if pong has
a zero value at the time this is called, as getpeerinfo's
bytesrecv_per_msg result excludes zero-values.
Combined these to a single wait_until as well, which will be a bit more
forgiving re the timeout while still enforcing the same 2 seconds
overall.
https://ci.appveyor.com/project/DrahtBot/bitcoin/builds/21310881#L62
Tree-SHA512: dc60f95a0e139c104fd81c8a7e0c9b3c25907de26c9d4e5976ae490e8ed5db0f0c492cd0e996ef6b5eb02cae82a62d4551ed36f95601871b19472050b3247bc0
d9ab0ffa386f2dd8d05852563d5011b3cb501df8 [qa] Fix race condition in example_test.py (Suhas Daftuar)
Pull request description:
There's a race between sending a getdata for a bunch of blocks with the node receiving those blocks from a peer, which could cause test failure. Fix this.
ACKs for top commit:
MarcoFalke:
ACK d9ab0ffa386f2dd8d05852563d5011b3cb501df8
laanwj:
ACK d9ab0ffa386f2dd8d05852563d5011b3cb501df8
promag:
ACK d9ab0ffa386f2dd8d05852563d5011b3cb501df8.
Tree-SHA512: c891f209eb2492f44e47da52ee6df950ff874ae26d2739011aca940d1caff6cedbac032b6509adbed07044c14fd711ba9d4d0e35c0f70bb2691f2ea4a46672ed
86edf4a2a502416ba8d6cebbce61030992f7ff6f expose CBlockIndex::nTx in getblock(header) (Gregory Sanders)
Pull request description:
Recent publication of a weakness in Bitcoin's merkle tree construction demonstrates many SPV applications vulnerable to an expensive to pull off yet still plausible attack: https://bitslog.wordpress.com/2018/06/09/leaf-node-weakness-in-bitcoin-merkle-tree-design/
Including the coinbase in the txoutproof seems the most effective fix, however results in a significant efficiency downgrade. Transactors will not even know a priori what the size of their proof will be within a couple orders of magnitude, unless they use the mid-state of SHA2 as detailed in the blog post.
Some applications, like Elements blockchain platform that take SPV-style proofs have optional access to a bitcoind to verify these proofs of inclusion and check depth in the chain. Returning `CBlockIndex::nTx` would allow an extremely easy and compact way of checking the depth of the tree, with no additional overhead to the codebase, and works with pruned nodes.
`getblockheader` is arguably not the place for it, but as mentioned before, is a natural workflow for us checking depth of a block in a possibly pruned node.
We should also ensure that `verifytxoutproof` ends up validating this depth fact as well, but left this for another PR.
Tree-SHA512: af4cf48e704c6088f8da06a477fda1aaa6f8770cee9b876c4465d1075966d6a95831a88817673fe5a0d6bbcdc1ffcbc1892e2be0d838c60fc6958d33eacdcc14
fae7b14a04 qa: Make TestNodeCLI command optional in send_cli (MarcoFalke)
ffffb10a9f qa: Rename cli.args to cli.options (MarcoFalke)
Pull request description:
Makes the `command` optional, since there are valid bitcoin-cli calls that have no `command`:
* `bitcoin-cli -?`
* `bitcoin-cli -getinfo`
* ...
Also, rename self.args to self.options, since that is the name in the `bitcoin-cli -help` documentation.
Tree-SHA512: f49c06024e78423301d70782946d47c0fb97a26876afba0a1f71ed329f5d7124aee4c2df520c7af74079bf9937851902f7be9c54abecc28dc29274584804d46c
ac96e788fa test_runner: Readable output if create_cache.py fails (Russell Yanofsky)
Pull request description:
Without this change, create_cache.py process output is shown as a byte() object
with \n escapes in a single line that is hard to read.
Tree-SHA512: 49cd0fff037c03f558e31a1281712cc4419df6c4ed8b342057a3d54ab6b31180e1a23cb586686952d81b8add5bec07844efa8cdf16ad20f40cc903a19437fda5
873beca6d [tests] Rename NodeConn and NodeConnCB (John Newbery)
Pull request description:
Final step in #11518
NodeConn -> P2PConnection
NodeConnCB -> P2PInterface
This is basically just a rename. Should be an easy review.
Tree-SHA512: fe1204b2b3d8182c5e324ffa7cb4099a47ef8536380e0bb9d37a5fccf76a24f548d1f1a7988ab8f830986a3058b670696de3fc891af5e5f75dbeb4e3273005d7
ee5efad6cf [tests] refactor node_network_limited (John Newbery)
b425131f5a [tests] remove redundant duplicate tests from node_network_limited (John Newbery)
2e02984591 [tests] node_network_limited - remove race condition (John Newbery)
dbfe294805 [tests] define NODE_NETWORK_LIMITED in test framework (John Newbery)
1285312048 [tests] fix flake8 warnings in node_network_limited.py (John Newbery)
Pull request description:
Fixes race condition in the node_network_limited test case introduced in #11740. Also tidies up the test and removes redundant duplicate tests.
Tree-SHA512: a5240fe35509d81a47c3d3b141a956378675926093e658d24be43027b20d3b5f0ba7c6017c8208487a1849d4fdfb911a361911d571423db7c50711250aba3011
* [tests] Remove mininode periodic (half-hour) ping messages
* [tests] Tidy up mininode
Add docstrings and renames some methods.
Also removes the redundant NodeConn.readable() method override.
* [tests] Move only: move NodeConnCB below NodeConn
This is required since NodeConnCB will inherit from NodeConn
after the next commit.
* [tests] Make NodeConnCB a subclass of NodeConn
This makes NodeConnCB a subclass of NodeConn, and
removes the need for the client code to know
anything about the implementation details of NodeConnCB.
NodeConn can now be swapped out for any other implementation
of a low-level connection without changing client code.
* [tests] Move version message sending from NodeConn to NodeConnCB
This commit moves the logic that sends a version message
on connection from NodeConn to NodeConnCB. NodeConn should
not be aware of the semantics or meaning of the P2P payloads.
* remove witness
Signed-off-by: Pasta <pasta@dashboost.org>
* Fix 11712
Co-authored-by: John Newbery <john@johnnewbery.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
fadf60e381 qa: Note on test order in test_runner (MarcoFalke)
Pull request description:
C.f. #11964
Tree-SHA512: 5f087965093722d9e7a3febddcc187e412bd0636a7ed2da60111668fe3bba6668110e25a38ddcccc0d0aae132611c56fa72f3f0c473fb3fb59e38be445edfcd5
09c6699900 [qa] Handle disconnect_node race (Suhas Daftuar)
Pull request description:
Several tests call disconnect_nodes() on each node-pair in rapid
succession, resulting in a race condition if a node disconnects a peer
in-between the calculation of the nodeid's to disconnect and the
invocation of the disconnectnode rpc call. Handle this.
Tree-SHA512: 3078cea0006fcb507c812004a777c505eb1e9dda7c6df12dbbe72395a73ff6f6760f597b6492054f5487b34534417ddef5fbad30553c135c288c4b7cfce79223
2f3bd47 Abstract directory locking into util.cpp (MeshCollider)
5260a4a Make .walletlock distinct from .lock (MeshCollider)
64226de Generalise walletdir lock error message for correctness (MeshCollider)
c9ed4bd Add a test for wallet directory locking (MeshCollider)
e60cb99 Add a lock to the wallet directory (MeshCollider)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/11888, needs a 0.16 milestone
Also adds a test that the lock works.
https://github.com/bitcoin/bitcoin/pull/11687 will probably rework this to a per-wallet lock instead of just the walletdir, but this fixes the current issue
Tree-SHA512: 98e52d67f820e3b8f919cf361ffbb7d928f1bd67603e0ed26c5076ea02d9b3a90c3535ddf7329f3b88171396fa28dd3c87adab3577a8a217bd1e4247bda99138
656fde5 Add script birthtime metadata to dump and import wallet (MeshCollider)
1bab9b2 Add script dump note to RPC help text and release notes (MeshCollider)
68c1e00 Add test for importwallet (MeshCollider)
9e1184d Add dumpwallet scripts test (MeshCollider)
ef0c730 Add scripts to importwallet RPC (MeshCollider)
b702ae8 Add CScripts to dumpwallet RPC (MeshCollider)
cdc260a Add GetCScripts to CBasicKeyStore (MeshCollider)
Pull request description:
As discussed in https://github.com/bitcoin/bitcoin/pull/11289#issuecomment-334600457, adds the CScripts from the wallet to the `dumpwallet` RPC and then allows them to be imported with the `importwallet` RPC. Includes a basic test, and modifies the helptext of the dumpwallet RPC.
Notes:
- Reviewers: use `?w=1` to avoid the indentation-only change in commit `Add scripts to importwallet RPC `
- currently the scripts are followed with `# addr=` comments just as the other keys are, unsure if this might confuse users into thinking all the scripts are for valid P2SH addresses though, but I don't think that should be an issue.
- there are no birthtimes for scripts, so script imports don't affect rescans
- `importwallet` imports the CScripts but I'm not sure how to approach specifying whether scripts are for P2SH addresses, BIP173 addresses, etc. whether that matters or not. Otherwise the RPC helptext might just need modification.
Fixes#11715
Tree-SHA512: 36c55837b3a58b9d3499d4c0c2ae82153d62aa71919e751574651b63a1d2b8ecc83796db4553cc65dad9b5341c3a42ae2fcf4d62598c30af267f8e1461ba8272
* [tests] Tidy up mininode.py module
Mostly move only. Adds a few extra comments.
* #11648 [tests] Move test_framework Bitcoin primitives into separate module
I manually recreated this commit, since we have A LOT of conflicts in mininode. However since it is primarily just a move, it was pretty easy to recreate
Signed-off-by: Pasta <pasta@dashboost.org>
* add import to messages.py
Signed-off-by: Pasta <pasta@dashboost.org>
* move import from mininode.py to messages.py
Signed-off-by: Pasta <pasta@dashboost.org>
* fix test failure
Signed-off-by: Pasta <pasta@dashboost.org>
* remove empty line at top of messages.py
Signed-off-by: pasta <pasta@dashboost.org>
* alphabetize MESSAGEMAP seperated by if it is dash specific or not
Signed-off-by: pasta <pasta@dashboost.org>
* remove accidentally added feefilter message
Signed-off-by: pasta <pasta@dashboost.org>
* Add missing getmnlistd/mnlistdiff messages to MESSAGEMAP
Co-authored-by: John Newbery <john@johnnewbery.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
This causes re-tries of LLMQ connections, which is required in cases
where 2 MNs tried to connect to each other and due to bad timing then
disconnected each other.
This is especially important when waiting for phase 1 (initialization),
as we might have skipped a whole DKG session before while the async DKG
session handler is still in the init phase (but for the old/skipped LLMQ).
75d0e4c544 [qa] Delete cookie file before starting node (Suhas Daftuar)
Pull request description:
When a node is restarted during a test after an unclean shutdown (such
as with -dbcrashratio), it's possible an old cookie file was left
behind. This can cause a race condition when restarting the node, where
the test framework might try to connect using credentials from the
old cookie file, just as the node will generate new credentials and
overwrite the old file.
Delete any such cookie file if present prior to startup.
Tree-SHA512: ae1e8bf8fd20e07c32b0715025693bb28b0e3dd34f328cae4346abf579b0c97b5db1c02782e1c46b7a3b6058d268b6d46b668e847658a6eed0be857ffb0d65dc
e36a0c0 [qa] Ensure bitcoind processes are cleaned up when tests end (Suhas Daftuar)
Pull request description:
When tests fail (such as due to a bug in the test, race condition, etc), it's possible that we could follow code paths that bypass our normal node shutdown that occurs in `TestNode.stop_node`. Add a destructor to `TestNode` that cleans this up.
Tree-SHA512: 72e04bc21462ebd0cb346fd1fe0540da454acfbad41923a0b06ea2317e9045b68e58f9adb02d8200891aca89a9d03a022eb72282aeb31a3b3afe7c6843a4b450
63048ec73d [tests] Test starting bitcoind with -h and -version (John Newbery)
Pull request description:
Test that starting bitcoind/bitcoin-qt with `-h` and `-version` works as expected.
Prompted by https://github.com/bitcoin/bitcoin/pull/10762#commitcomment-28345993, which is a nullpointer dereference triggered by starting bitcoin-qt with `-h`.
On master, this test passes when run over bitcoind, but fails when running over bitcoin-qt. I used xvfb as a virtual frame buffer to test:
```
BITCOIND=/home/ubuntu/bitcoin/src/qt/bitcoin-qt xvfb-run ./feature_help.py --nocleanup
2018-03-30T17:09:37.767000Z TestFramework (INFO): Initializing test directory /tmp/user/1000/testdi4dre13
2018-03-30T17:09:37.767000Z TestFramework (INFO): Start bitcoin with -h for help text
2018-03-30T17:09:37.841000Z TestFramework (ERROR): Assertion failed
Traceback (most recent call last):
File "/home/ubuntu/bitcoin/test/functional/test_framework/test_framework.py", line 126, in main
self.run_test()
File "./feature_help.py", line 25, in run_test
assert_equal(ret_code, 0)
File "/home/ubuntu/bitcoin/test/functional/test_framework/util.py", line 39, in assert_equal
raise AssertionError("not(%s)" % " == ".join(str(arg) for arg in (thing1, thing2) + args))
AssertionError: not(-11 == 0)
2018-03-30T17:09:37.842000Z TestFramework (INFO): Stopping nodes
Traceback (most recent call last):
File "./feature_help.py", line 42, in <module>
HelpTest().main()
File "/home/ubuntu/bitcoin/test/functional/test_framework/test_framework.py", line 149, in main
self.stop_nodes()
File "/home/ubuntu/bitcoin/test/functional/test_framework/test_framework.py", line 273, in stop_nodes
node.stop_node()
File "/home/ubuntu/bitcoin/test/functional/test_framework/test_node.py", line 141, in stop_node
self.stop()
File "/home/ubuntu/bitcoin/test/functional/test_framework/test_node.py", line 87, in __getattr__
assert self.rpc_connected and self.rpc is not None, "Error: no RPC connection"
AssertionError: Error: no RPC connection
```
Passes for bitcoind and bitcoin-qt when run on #12836.
Longer term, we should consider running functional tests over bitcoin-qt in one of the Travis jobs.
Tree-SHA512: 0c2f40f3d5f0e78c3a1b07dbee8fd383eebab27ed0bf2a98a5b9cc66613dbd7b70e363c56163a37e02f68ae7ff7b3ae1769705d0e110ca68a00f8693315730a4
fa23105 qa: Cache only chain and wallet for regtest datadir (MarcoFalke)
Pull request description:
mempool.dat should be empty and I don't see a need to copy it around when restoring from the cache.
Tree-SHA512: f11ab69732db4dee0e9a0900570464e49085532b0cebc963877057112a7b985c477da3d32eb2093daabac9ada9e73b7c49881681ec5efa6101919b0af76001cf
9d7f839a2 test: Use os.path.join consistently in feature_pruning tests (Ben Woosley)
81b082277 test: Use wait_until in tests where time was used for polling (Ben Woosley)
Pull request description:
This is prompted by and builds on #12545, a nice cleanup / consolidation of patterns.
In cases where the exception message was meaningful, I tried to represent it as well in a comment.
I expect #12545 will go in first, but I'm happy to squash them if that's preferred.
Tree-SHA512: 7a861244001c87fd6b59b6bc248ee741ac8178f7255d6f1fda39bc693c5ff3b7de5f53d13afe9829aef6ea69153481edb0a9d5bc07c36c4f66b4315edd180bb4
fa41d68a2 qa: Fix python TypeError in script.py (MarcoFalke)
Pull request description:
`__repr__` returns string, so don't mix it with byte strings.
This fixes
```
TypeError: %b requires a bytes-like object, or an object that implements __bytes__, not 'str'
Tree-SHA512: fac06e083f245209bc8a36102217580b0f6186842f4e52a686225111b0b96ff93c301640ff5e7ddef6a5b4f1689071b16a9a8dc80f28e2b060ddee29edd24ec7
42e1b5d [test] Round target fee to 8 decimals in assert_fee_amount (Karl-Johan Alm)
Pull request description:
The output would produce arbitrary number of decimal points, sometimes resulting in 9 decimals:
```
AssertionError: Fee of 0.00000415 BTC too low! (Should be 0.000006175 BTC)
```
The above looks like the expected fee is 6175 sats when in reality it's 618.
Tree-SHA512: ddbff2926a88890d6e34a58db36f0b15a917a80064be6e40e9bcbec3f05ae6202d02adcd7873733945b043fa121d4a56dd930446ec368078fe1935cbfff898ce
6697a70 add test for unconfirmed balance between restarts (Gregory Sanders)
6ba8f30 don't attempt mempool entry for wallet transactions on startup if already in mempool (Gregory Sanders)
Pull request description:
…eady in mempool
Mempool loads first, wallet second. Second attempt fails, marking that transaction !fInMempool. Those funds will disappear until confirmation is reached.
Tree-SHA512: 955f0565ec1dc1ba395e0b803a98c07b7cd00c8cac5ec618ed832fed259a856fb7bbbe41310cf6a4e43c0435e09b156109d2a4467d403811dc8379d2caebeede
9d42cc333 [tests] address review comments (John Newbery)
f0c4ab9a7 [tests] fix flakiness in sendheaders.py (John Newbery)
25fd6e2c2 [tests] refactor check_last_announcement() in sendheaders.py (John Newbery)
f39d4bbd1 [tests] tidy up BaseNode in sendheaders.py (John Newbery)
2613c545f [tests] fix flake8 warnings in sendheaders.py (John Newbery)
Pull request description:
This PR should fix the intermittent failure of sendheaders.py described in #11673. The first three commits are tidying up and refactoring the file. The final commit _fix flakiness in sendheaders.py_ fixes the intermittent failures. The commit message for that commit describes the problems that are being fixed.
I think @laanwj @MeshCollider @MarcoFalke have seen these failures.
fixes#11673
Tree-SHA512: 278e1af85f2eae00f970f2d8ef33686dd52b4f62180dea4cfdaff7bcf3287c6f1c2930355d99461a12f0c51c4d42cc3b1cb3275174134028ca4d06ffc24c18dd
aac6bce112 test: Make ua_comment test pass on 0.16.0 (Wladimir J. van der Laan)
Pull request description:
The specific length of the uacomment is one shorter on `0.16.0` than on `0.15.99` causing the (stupid) test to fail.
This change makes `assert_start_raises_init_error` optionally take a regexp, so that the error message can be checked without being specific about the reported length.
Tree-SHA512: 1c5e9f1d0b36f004f8113c7e211e8281194ce8057869ac3702172d8b021df3c3aa3b8f79b9434678ed0fb7146f848802410647d434fc884aa200b6a5e26afe8b
dcfef27 cli: Reject arguments to -getinfo (Wladimir J. van der Laan)
Pull request description:
Currently it's possible to accidentally type e.g.
bitcoin-cli -getinfo getbalance
and get an answer which can be confusing; the trailing arguments are just ignored.
To avoid this, throw an error if the user provides arguments to
`-getinfo`.
Tree-SHA512: 3603e8fa852b884d1dd3b7462db40b092fe8b3390fd4384b4ee330315d797aff711e9f62990012fd4b5a55c8678734ba8497a5488a09ee6b65cf8a99017d6eb4
ec527c6 Don't allow relative -walletdir paths (Russell Yanofsky)
Pull request description:
This makes it an error to explicitly specify a non-absolute -walletdir path, and also adds a debug.log warning if a relative rather than absolute -datadir path is configured.
Specifying paths relative to the current working directory in a daemon process can be dangerous, because files can fail to be located even if the configuration doesn't change, but the daemon is started up differently.
Specifying a relative -datadir now adds a warning to the debug log. It would not be backwards-compatible to forbid relative -datadir paths entirely, and it could also be inconvenient for command line testing.
Specifying a relative -walletdir now results in a startup error. But since the -walletdir option is new in 0.16.0, there should be no compatibility issues. Another reason not to use working directory paths for -walletdir specifically is that the default -walletdir is a "wallets" subdirectory inside the datadir, so it could be surprising that setting -walletdir manually would choose a directory rooted in a completely different location.
Tree-SHA512: 67cbdae677f82487a9031c5ec96b0205a488ab08718a0f4f49365e025119f3d7f6cfc88ba1eba04c1ecd8b9561a5b2c42e2e1a267af7c08c76b83e5e361f5a31
a14dbff39e Allow multiwallet.py to be used with --usecli (Russell Yanofsky)
f6ade9ce1a [tests] allow tests to be run with --usecli (John Newbery)
ff9a363ff7 TestNodeCLI batch emulation (Russell Yanofsky)
ca9085afc5 Prevent TestNodeCLI.args mixups (Russell Yanofsky)
fcfb952bca Improve TestNodeCLI output parsing (Russell Yanofsky)
Pull request description:
Lack of test coverage was pointed out by @jnewbery in https://github.com/bitcoin/bitcoin/pull/11687#discussion_r158133900
Tree-SHA512: 5f10e31abad11a5edab0da4e2515e39547adb6ab9e55e50427ab2eb7ec9a43d6b896b579b15863e5edc9beee7d8bf1c84d9dabd247be0760a1b9ae39e1e8ee02
aac6b3f067 Update files.md for new wallets/ subdirectory (MeshCollider)
b67342906c Cleanups for walletdir PR (MeshCollider)
Pull request description:
This addresses the remaining nits from https://github.com/bitcoin/bitcoin/pull/11466
- Updates `doc/files.md` with respect to the new default wallet directory
- Fixes @promag and @laanwj's error message nit, and Jonas' release notes nit
- ~Addresses @laanwj's net-specific wallet subdirectory concern in the case that a walletdir is specified~
- Changes the #includes from "" to <> style after #11651
Tree-SHA512: b86bf5fdc4de54c1b0f65b60a83af3cf82b35d216ce9c0de724803bfba6934796238b6c412659dcc29ae2e3e856d4eb97ae777c80f36f4089d8acecfddefe9aa
2b2b96cd45 Use std::bind instead of boost::bind to re-lock the wallet (Suhas Daftuar)
662d19ff72 [rpcwallet] Clamp walletpassphrase value at 100M seconds (Suhas Daftuar)
Pull request description:
Larger values seem to trigger a bug on macos+libevent (resulting in the rpc server stopping).
Tree-SHA512: 890f3b641f6c586e2f8f629a9d23bca6ceb8b237b285561aad488cb7adf941a21177d3129d0c2b8293c0a673cd8e401957dbe2b6b3b7c8c4e991bb411d260102
fafdad0d4 qa: Remove unused NodeConn members (MarcoFalke)
Pull request description:
* `ver_send` and `ver_recv` were completely unused
* `rpc` was only used once, in p2p-segwit. Imo better only pass it to the constructor in that single test
Tree-SHA512: 7f85554d6d0fd2096516ca3c608811d5370da66cde35d8031bdc921607a7a4efdb26355896012f75f713f8df09e28d46ba46be69fd96a5898fabb1a25cbcb8ad
fb00c45c3 [tests] Explicitly disallow support for p2p versions below 60001 (John Newbery)
3858aabbd [tests] Remove support for p2p alert messages (John Newbery)
c0b127470 [tests] Remove support for bre-BIP31 ping messages (John Newbery)
2904e301c [tests] Remove dead code from mininode.py (John Newbery)
Pull request description:
This is the first part of #11518. It removes a ~150 lines of unused code from the mininode module:
- remove unused `deliver_sleep_time` and `EarlyDisconnectError` code
- remove support for pre-BIP31 ping messages
- remove support for alert message
- explicitly don't support p2p versions lower than 60001
Should be an easy ACK for reviewers. If all extended tests pass, then this code really was dead :)
Tree-SHA512: 508e612ceb0b094250d18e75522d51e6b14cd069443050ba4af34d6f890c58721cb5653e8bc000b60635b9474d035b0dcd9c509c0dcdb3a7501df17b787f83b0
readd is None check
Signed-off-by: Pasta <pasta@dashboost.org>
f89308532 [tests] Don't subclass from object for Python 3 (John Newbery)
8f9e3627e [tests] authproxy.py: tidy up __init__() (John Newbery)
323d8f61e [tests] fix flake8 warnings in authproxy.py (John Newbery)
fc0176d01 [tests] use python3 for authproxy.py (John Newbery)
Pull request description:
A few trivial tidyups in the test_framework:
- the test_framework can only be run in Python3, so remove the py2/3 compatibility workarounds in authproxy.py
- while there, do some general tidying up of the module - fix flake8 warnings, make initialization code more compact
- All classes in Python3 are new-style. No need to explicitly inherit from `object`.
Tree-SHA512: d15c93aa4b47c1ad7d05baa7a564053cf0294932e178c95ef335380113f42e1af314978d07d3b107292a8e3496fd840535b5571a9164182feaa062a1e9ff8b73
fix up mininode.py slightly
Signed-off-by: Pasta <pasta@dashboost.org>
5e69a43 Add test for bitcoin-cli -getinfo (John Newbery)
3826253 rpc: Handle `getinfo` locally in bitcoin-cli w/ `-getinfo` (Wladimir J. van der Laan)
Pull request description:
Since @laanwj doesn't want to maintain these changes anymore, I will.
This PR is a revival of #8843. I have addressed @jnewbery's comments.
Regarding atomicity, I don't think that is a concern here. This is explicitly a new API and those who use it will know that this is different and that it is not atomic.
Tree-SHA512: 9664ed13a5557bda8c43f34d6527669a641f260b7830e592409b28c845258fc7e0fdd85dd42bfa88c103fea3ecdfede5f81e3d91870e2accba81c6d6de6b21ff
134cdc7 Test walletpassphrase timeout bounds and clamping (Andrew Chow)
0b63e3c Clamp walletpassphrase timeout to 2^(30) seconds and check its bounds (Andrew Chow)
Pull request description:
Fixes#12100
Makes the timeout be clamped to 2^30 seconds to avoid the issue with sign flipping with large timeout values and thus relocking the wallet instantly. Unlocking for at most ~34 years should be sufficient.
Also checks that the timeout is not negative to avoid instant relocks.
Tree-SHA512: 426922f08c54e323d259e25dcdbebc2cd560708a65111ce6051493a7e7c61e79d9da1ea4026cc0d68807d728f5d7c0d7c58168c6ef4167b94cf6c2877af88794
aad3090 [rpc] Adding ::minRelayTxFee amount to getmempoolinfo and updating mempoolminfee help description (Jeff Rade)
Pull request description:
These are RPC document changes from #11475 which is now merged. Took into consideration comments from #11475 and #6941 for this PR.
Biggest change here is when calling `getmempoolinfo`, will now show the `minrelaytxfee` in the JSON reponse (see below):
```
$ bitcoin-cli getmempoolinfo
{
"size": 50,
"bytes": 13102,
"usage": 70480,
"maxmempool": 300000000,
"mempoolminfee": 0.00001000,
"minrelaytxfee": 0.00001000
}
```
Fixes#8953
Tree-SHA512: 5ca583961365ee1cfe6e0d19afb0b41d542e179efee3b3c5f3fcf7d3ebca9cc3eedfd1434a0da40c5eed84fba98b35646fda201e6e61c689b58bee9cbea44b9e
be9a13c Add configuration/argument testing (MeshCollider)
Pull request description:
Adds a new functional test for testing various command line and configuration file argument interactions, that aren't specific enough to other functionality to be placed in other tests.
Currently this tests the error messages for non-existent datadir, which would have caught the bug fixed in https://github.com/bitcoin/bitcoin/pull/11829. It also tests that command line arguments override the ones in the config file.
I plan on working on a fix for https://github.com/bitcoin/bitcoin/issues/11819 / https://github.com/bitcoin/bitcoin/issues/1044 and then expanding this test with cases for that.
Tree-SHA512: 97aea18c67d331db3ca3d0c99c79267cf012df67fddafc9fac63d392f5c3a6469aa14d93b5865c3bbe561461648d2485367978a77446483b8df53d1916f1c8e8
de74c62 [Doc] Update bip.md, add support for BIP 159 (Jonas Schnelli)
e054d0e [QA] Add node_network_limited test (Jonas Schnelli)
bd09416 Avoid leaking the prune height through getdata (fingerprinting countermeasure) (Jonas Schnelli)
27df193 Always set NODE_NETWORK_LIMITED bit (Jonas Schnelli)
7caba38 Add NODE_NETWORK_LIMITED flags and min block amount constants (Jonas Schnelli)
Pull request description:
Extracted from #10387.
Does implement BIP159, but only the signalling part. No connections are made to NODE_NETWORK_LIMITED in this PR.
The address relay and connection work (the more complicated part) can then be separated (probably in #10387).
Tree-SHA512: e3218eb4789a9320b0f42dc10f62d30c13c49bdef00443fbe653bee22933477adcfc1cf8f6a95269324560b5721203ed41f3c5e2dd8a98ec2791f6a9d8346b1a
fa4c16d qa: Add getrawtransaction in_active_chain=False test (MarcoFalke)
Pull request description:
#10275 accidentally forgot to add a test for `in_active_chain==False`.
This adds a test and also removes the special casing of `blockhash.IsNull()`, which makes no sense imo.
Tree-SHA512: 6c51295820b3dcd53b0b48020ab2b8c8f5864cd5061ddab2b35d35d643eb3e60ef95ff20c06c985a2e47f7080e82f27f3e00ee61c85dce627776d5ea6febee8f
434526a [test] Add tests for getrawtransaction with block hash. (Karl-Johan Alm)
b167951 [rpc] Allow getrawtransaction to take optional blockhash to fetch transaction from a block directly. (Karl-Johan Alm)
a5f5a2c [rpc] Fix fVerbose parsing (remove excess if cases). (Karl-Johan Alm)
Pull request description:
[Reviewer hint: use [?w=1](https://github.com/bitcoin/bitcoin/pull/10275/files?w=1) to avoid seeing a bunch of indentation changes.]
Presuming a user knows the block hash of the block containing a given transaction, this PR allows them to fetch the raw transaction, even without `-txindex`. It also enables support for getting transactions that are in orphaned blocks.
Note that supplying a block hash will override mempool and txindex support in `GetTransaction`. The rationale behind this is that a transaction may be in multiple places (orphaned blocks) and if the user supplies an explicit block hash it should be adhered to.
```Bash
$ # a41.. is a tx inside an orphan block ..3c6f.. -- first try getting it normally
$ ./bitcoin-cli getrawtransaction a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79 1
error code: -5
error message:
No such mempool transaction. Use -txindex to enable blockchain transaction queries. Use gettransaction for wallet transactions.
$ # now try with block hash
$ ./bitcoin-cli getrawtransaction a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79 1 0000000000000000003c6fe479122bfa4a9187493937af1734e1e5cd9f198ec7
{
"hex": "01000000014e7e81144e42f6d65550e59b715d470c9301fd7ac189[...]90488ac00000000",
"inMainChain": false,
"txid": "a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79",
"hash": "a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79",
"size": 225,
[...]
}
$ # another tx 6c66... in block 462000
$ ./bitcoin-cli getrawtransaction 6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735 1 00000000000000000217f2c12922e321f6d4aa933ce88005a9a493c503054a40
{
"hex": "0200000004d157[...]88acaf0c0700",
"inMainChain": true,
"txid": "6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735",
"hash": "6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735",
"size": 666,
[...]
}
$
```
Tree-SHA512: 279be3818141edd3cc194a9ee65929331920afb30297ab2d6da07293a2d7311afee5c8b00c6457477d9f1f86e86786a9b56878ea3ee19fa2629b829d042d0cda
aece8a463 (finally) remove getinfo in favor of more module-specific infos (Matt Corallo)
Pull request description:
I see no reason not to have done this in 0.13, let alone for 0.15.
Tree-SHA512: ed3e36f99e9cb90304089e5957ddfbf74141e3e77d850e498e9e45dd8bc1deb9fe36b3fec4c43243023268670a45808de3c23d660df76fa27db6688814c464a5
c1e5d40 Make debugging test crash easier (MeshCollider)
8263f6a Create walletdir if datadir doesn't exist and fix tests (MeshCollider)
9587a9c Default walletdir is wallets/ if it exists (MeshCollider)
d987889 Add release notes for -walletdir and wallets/ dir (MeshCollider)
80c5cbc Add test for -walletdir (MeshCollider)
0530ba0 Add -walletdir parameter to specify custom wallet dir (MeshCollider)
Pull request description:
Closes#11348
Adds a `-walletdir` parameter which specifies a directory to use for wallets, allowing them to be stored separately from the 'main' data directory. Creates a new `wallets/` directory in datadir if this is the first time running, and defaults to using it if it exists.
Includes tests and release notes. Things which might need to be considered more:
- there is no 'lock' on the wallets directory, which might be needed?
- because this uses a new wallets/ directory by default, downgrading to an earlier version won't see the wallets in that directory (not a big deal though, users can just copy them up to the main dir)
- jnewbery suggested putting each wallet in its own directory, which is a good idea, but out of scope for this PR IMO. EDIT: this is being done in https://github.com/bitcoin/bitcoin/pull/11687
- doc/files.md needs updating (will do soon)
I also considered including a cleanup by removing caching of data directory paths and instead just initialise them once on startup (c.f. #3073), but decided it wasn't super relevant here will just complicate review.
Tree-SHA512: c8ac04bfe9a810c32055f2c8b8fa0d535e56125ceb8d96f12447dd3538bf3e5ee992b60b1cd2173bf5f3fa023a9feab12c9963593bf27ed419df929bb413398d
* Merge #10952: [wallet] Remove vchDefaultKey and have better first run detection
e53615b Remove vchDefaultKey and have better first run detection (Andrew Chow)
Pull request description:
Removes vchDefaultKey which was only used for first run detection. Improves wallet first run detection by checking to see if any keys were read from the database.
This also fixes a (rather contrived) case where an encrypted non-HD wallet has corruption such that the default key is no longer valid and is loaded into a Core version that supports HD wallets. This causes a runtime exception since a new hd master key is generated as the software believes the wallet file is newly created but cannot add the generated key to the wallet since it is encrypted. I was only able to replicate this error by creating a non-hd wallet, encrypting it, then editing the wallet using `db_dump` and `db_load` before loading the wallet with hd enabled. This problem has been reported by [two](https://bitcointalk.org/index.php?topic=1993244.0) [users](https://bitcointalk.org/index.php?topic=1746976.msg17511261#msg17511261) so it is something that can happen, although that raises the question of "what corrupted the default key".
~P.S. I don't know what's up with the whitespace changes. I think my text editor is doing something stupid but I don't think those are important enough to attempt undoing them.~ Undid those
Tree-SHA512: 63b485f356566e8ffa033ad9b7101f7f6b56372b29ec2a43b947b0eeb1ada4c2cfe24740515d013aedd5f51aa1890dfbe499d2c5c062fc1b5d272324728a7d55
* Update src/wallet/wallet.cpp
Co-Authored-By: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
ee11121 Add special error for genesis coinbase to gettransaction (MeshCollider)
Pull request description:
Suggested by sipa here: https://botbot.me/freenode/bitcoin-core-dev/2018-01-23/?msg=96069825&page=2
Just adds a special error message for the genesis block coinbase transaction when using `getrawtransaction`
Tree-SHA512: cd102c7983ec5457b299bff4b6db747d339fda157933a3ac54aec26b1e48b115aa68c1c9e6cb7a916f15c7786273ab558b2b20ab9768544d211e0ae9d1480e34
88af502 test: Add createrawtransaction functional tests (João Barbosa)
27c6199 test: Add multidict to support dictionary with duplicate key (laanwj) (João Barbosa)
320669a rpc: Validate replaceable type in createrawtransaction (João Barbosa)
Pull request description:
This was motivated by the `Invalid parameter, duplicated address` test.
Credit to @laanwj for `multidict` implementation.
Tree-SHA512: a87139ae11004b73b467db1e8a072b75e23a0622b173a5668eed383b3575d8abc709817ddd2dfdc53f55afc90750fb61331199ad5de38c1ef6d482f2bc220f74
5a7c09a test: Add tests for `-debuglogfile` with subdirs (Anthony Towns)
4158734 doc: Update release notes for `-debuglogfile` (Wladimir J. van der Laan)
2323242 test: Add test for `-debuglogfile` (Wladimir J. van der Laan)
cf5f432 Add `-debuglogfile` option (Wladimir J. van der Laan)
Pull request description:
This patch adds an option to configure the name and/or directory of the debug log file.
The user can specify either a relative path, in which case the path is relative to the (network specific) data directory. They can also specify an absolute path to put the log anywhere else in the file system.
Alternative to #11741 that gets rid of the concept of a "log directory" by specifying the path for the specific kind of log, the debug log. Which happens to be the only kind of log we have at this point*, but a hypothetical new kind of log (say, an audit log) would get a new option. This has more flexibility than specifying a directory which has to contain all of them.
\* excluding `db.log` which is internally generated by the wallet database library, but that one moves along with `-walletdir`.
Tree-SHA512: 4434d0e598dc23504e5c9e67fdbaef56db4f0fd490f9f54fd503e69d4dda9b5b69c539e1794ed841e72161b7b1dc3374d2f1193dd431b057566750e56fd8f24b
28f8b66 Diagnose unsuitable outputs in lockunspent(). (Eelis)
Pull request description:
Fixes#2667.
This is a simplified version of pull request #3574, which was abandoned by its author.
I added some tests as well.
Tree-SHA512: e63e00dec8b1b232079380183805cb0b0b18c78ea6bea769837949aab984689d7f68b2ccfe66b1873517b040b9e616ce0eb058575c3d4382aa8c26eebcf1f14e
5e0ba8f8c [wallet] getreceivedbyaddress should return error if address is not mine (John Newbery)
ea0cd24f7 [tests] Tidy up receivedby.py (John Newbery)
Pull request description:
Two commits:
- First commit tidies up the `receivedby.py` test (and speeds it up by factor of two)
- Second commit changes getreceivedbyaddress to return error if the address is not found in wallet, and adds test to `receivedby.py`
Tree-SHA512: e41342dcbd037a6b440cbe4ecd3b8ed589e18e477333f0d866f3564e948e0f5231e497d5ffb66da4e6680eb772d9f0cf839125098bb68b92d04a5ee35c6c0a81
11413646b [trivial] (whitespace only) fix getblockchaininfo alignment (John Newbery)
bd9c18171 [rpc] Add initialblockdownload to getblockchaininfo (John Newbery)
Pull request description:
Exposing whether the node is in IBD would help for testing, and may be useful in general, particularly for developers.
First discussed in #10357 here: https://github.com/bitcoin/bitcoin/pull/10357#pullrequestreview-59963870
> ... we could simplify this (and possibly other) tests by just adding a way to know if a node is in IBD. I'd like to do that, but I'm not sure it makes sense to complicate this PR with discussion over how that information should be made available. Eg it's not clear to me that the notion of being in IBD is worth exposing to the casual user, versus a hidden rpc call or something, since the definition has changed over time, and may continue to change in the future. But I still do agree that at least for testing purposes it would be far simpler to expose the field somehow...
This PR currently implements the simplest way of doing this: adding an `initialblockdownload` field to `getblockchaininfo`. Other approaches we could take:
1. add a new debug RPC method that exposes `IBD` and potentially other information.
2. add a parameter to `getblockchaininfo`, eg `debug_info`, which would cause it to return debug information including IBD
3. add a query string to the url `?debug=true` which would cause RPCs to return additional debug information.
I quite like the idea of (3). Feedback on these and other approaches very much welcomed!
@sdaftuar @laanwj
Tree-SHA512: a6dedd47f8c9bd38769cc597524466250041136feb33500644b9c48d0ffe4e3eeeb2587b5bbc6420364ebdd2667df807fbb50416f9a7913bbf11a14ea86dc0d4
bc9c0a7 Improve wallet-accounts test (Russell Yanofsky)
Pull request description:
Add comments and
- Verify sending to a account causes getaccountaddress to generate new addresses.
- Verify sending to a account causes getreceivedbyaccount to return amount received.
- Verify ways setaccount updates the accounts of existing addresses.
Tree-SHA512: 4facc8d10fb23847081e8081839d4050faa855cca40f34012b82297bf1a8cfdb975b26314bc518dc6b3f5997452a7acf309f9627e0dff359347c628b37014bfa
Sometimes the node we ask for mnlistdiff is so fast to reply that we receive the message back before we reset `last_mnlistdiff`. To fix this we should reset it before sending the message, not after.
