- Scan IX locks on new blocks to make sure no conflicting txes are present
- Upon completion of a IX lock, check for conflicts and remove blocks if needed
Darksend defaults to a new mode which enables inputs/outputs
of each session to be different. For example 10DRK can be input
and 1DRKx10 can be output. This strengthens the anonymity of
Darksend greatly, which also increasing the usability (Users who
run out of .1DRK denominations can simply turn on Darksend to
split up larger inputs).
- When attempting to connect to a masternode for submission into the pool a recursive call to DoAutoDenominate was used. This could possibly take more than 1 minute to complete if it found a string of bad masternodes, in which case the correct masternode was overwritten and replaced with an invalid one. Upon submission, the DS TX was given to the incorrect node causing collateral to be charged.
- To fix this I've removed the recursion and added a critical section to DoAutoDenominate.
- Exact input denominations are matched in PrepareDarksendDenominate to remove the possibility of having change in the pool
- Removed disabled denominations, not needed anymore
Exact amounts are now allocated directly to denominated
funds then submitted to the pool. This improves anonymity
by never having non-denomination inputs enter or exit the pool.
Randomness has also been added to the amount of each session to
improve anonymity.
- Fixed a few issues when calculating progress including some variables that should be limited to 1 (a and b). GetDenominatedBalance also seemed to be giving bad results so I rewrote it to be cleaner, not sure if that was a part of the problem.
- Progress bar is only recalculated when all inputs in wallet have been confirmed (will stop the progress from jumping around)
More info regarding KeePass: http://keepass.info/
KeePass integration will use KeePassHttp (https://github.com/pfn/keepasshttp/) to facilitate communications between the client and KeePass. KeePassHttp is a plugin for KeePass 2.x and provides a secure means of exposing KeePass entries via HTTP for clients to consume.
The implementation is dependent on the following:
- crypter.h for AES encryption helper functions.
- rpcprotocol.h for handling RPC communications. Could only be used partially however due some static values in the code.
- OpenSSL for base64 encoding. regular util.h libraries were not used for base64 encoding/decoding since they do not use secure allocation.
- JSON Spirit for reading / writing RPC communications
The following changes were made:
- Added CLI options in help
- Added RPC commands: keepass <genkey|init|setpassphrase>
- Added keepass.h and keepass.cpp which hold the integration routines
- Modified rpcwallet.cpp to support RPC commands
The following new options are available for darkcoind and darkcoin-qt:
-keepass Use KeePass 2 integration using KeePassHttp plugin (default: 0)
-keepassport=<port> Connect to KeePassHttp on port <port> (default: 19455)
-keepasskey=<key> KeePassHttp key for AES encrypted communication with KeePass
-keepassid=<name> KeePassHttp id for the established association
-keepassname=<name> Name to construct url for KeePass entry that stores the wallet passphrase
The following rpc commands are available:
- keepass genkey: generates a base64 encoded 256 bit AES key that can be used for the communication with KeePassHttp. Only necessary for manual configuration. Use init for automatic configuration.
- keepass init: sets up the association between darkcoind and keepass by generating an AES key and sending an association message to KeePassHttp. This will trigger KeePass to ask for an Id for the association. Returns the association and the base64 encoded string for the AES key.
- keepass setpassphrase <passphrase>: updates the passphrase in KeePassHttp to a new value. This should match the passphrase you intend to use for the wallet. Please note that the standard RPC commands walletpassphrasechange and the wallet encrption from the QT GUI already send the updates to KeePassHttp, so this is only necessary for manual manipulation of the password.
Sample initialization flow from darkcoin-qt console (this needs to be done only once to set up the association):
- Have KeePass running with an open database
- Start darkcoin-qt
- Open console
- type: "keepass init" in darkcoin-qt console
- (keepass pops up and asks for an association id, fill that in). Example: mydrkwallet
- response: Association successful. Id: mydrkwalletdarkcoin - Key: AgQkcs6cI7v9tlSYKjG/+s8wJrGALHl3jLosJpPLzUE=
- Edit darkcoin.conf and fill in these values
keepass=1
keepasskey=AgQkcs6cI7v9tlSYKjG/+s8wJrGALHl3jLosJpPLzUE=
keepassid=mydrkwallet
keepassname=testwallet
- Restart darkcoin-qt
At this point, the association is made. The next action depends on your particular situation:
- current wallet is not yet encrypted. Encrypting the wallet will trigger the integration and stores the password in KeePass (Under the 'KeePassHttp Passwords' group, named after keepassname.
- current wallet is already encrypted: use "keepass setpassphrase <passphrase>" to store the passphrase in KeePass.
At this point, the passphrase is stored in KeePassHttp. When Unlocking the wallet, one can use keepass as the passphrase to trigger retrieval of the password. This works from the RPC commands as well as the GUI.
Darksend is now capable of taking queue objects (which show who wants to mix what)
and looking at it's own inputs to see if it's at all possible to join their mixing
session. This plus other improvements should make Darksend much faster for mixing
coins.
- Progress bar is far more accurate now. It only takes into account the inputs that could possibly go into Darksend and ignores the rest.
- Darksend can support down to 1.5DRK now.
- New "masternode outputs" command for start-many
Previously the minRelayTxFee was only enforced on user specified values.
It was possible for smartfee to produce a fee below minRelayTxFee which
would just result in the transaction getting stuck because it can't be
relayed.
This also introduces a maxtxfee option which sets an absolute maximum
for any fee created by the wallet, with an intention of increasing
user confidence that the automatic fees won't burn them. This was
frequently a concern even before smartfees.
If the configured fee policy won't even allow the wallet to meet the relay
fee the transaction creation may be aborted.
Rebased-From: aa279d6131
Github-Pull: #5485
Add a sanity check to prevent cosmic rays from flipping a bit in the
generated public key, or bugs in the elliptic curve code. This is
simply done by signing a (randomized) message, and verifying the
result.
We're using GetRandomBytes in several contexts where it's either
unwieldy to return an error, or an error would mean a fatal exception
anyhow.
@gmaxwell checked OpenSSL a while ago and discovered that it never
actually fails, but it can't hurt to be a bit paranoid here.
Make the CBlockIndex* (optionally) returned by GetDepthInMainChain
const. This prevents accidental modification. The result is for
reading its properties rather than modifying it.
This allows for a reversal of the current behavior.
This:
CScript foo;
CScriptID bar(foo.GetID());
Becomes:
CScript foo;
CScriptID bar(foo);
This way, CScript is no longer dependent on CScriptID or Hash();
d0c4197 change exit(1) to an assert in CWallet::EncryptWallet (Philip Kaufmann)
870da77 fix possible memory leaks in CWallet::EncryptWallet (Philip Kaufmann)
f606bb9 fix a possible memory leak in CWalletDB::Recover (Philip Kaufmann)
- add missing deletes for pwalletdbEncryption
- add an assert before trying to reserve memory for pwalletdbEncryption
- add a destructor to CWallet, which ensures deletion of
pwalletdbEncryption on object destruction
2c2cc5d Remove some unnecessary c_strs() in logging and the GUI (Philip Kaufmann)
f7d0a86 netbase: Use .data() instead of .c_str() on binary string (Wladimir J. van der Laan)
The case SetMerkleBranch(NULL) was never actually used, and thus the
involved code (loading the block from disk) can be removed and the
implementation simplified.
Split up util.cpp/h into:
- string utilities (hex, base32, base64): no internal dependencies, no dependency on boost (apart from foreach)
- money utilities (parsesmoney, formatmoney)
- time utilities (gettime*, sleep, format date):
- and the rest (logging, argument parsing, config file parsing)
The latter is basically the environment and OS handling,
and is stripped of all utility functions, so we may want to
rename it to something else than util.cpp/h for clarity (Matt suggested
osinterface).
Breaks dependency of sha256.cpp on all the things pulled in by util.
4eedf4f make RandAddSeed() use OPENSSL_cleanse() (Philip Kaufmann)
6354935 move rand functions from util to new random.h/.cpp (Philip Kaufmann)
001a53d add GetRandBytes() as wrapper for RAND_bytes() (Philip Kaufmann)
An user on IRC reported an issue where `getrawchangeaddress`
keeps returning a single address when the keypool is exhausted.
In my opinion this is strange behaviour.
- Change CReserveKey to fail when running out of keys in the keypool.
- Make `getrawchangeaddress` return RPC_WALLET_KEYPOOL_RAN_OUT when
unable to create an address.
- Add a Python RPC test for checking the keypool behaviour in combination
with encrypted wallets.
