- some were not used, some were included twice, some were in the wrong place, some were missing (but it compiled because some were in the wrong place)
- organized a bit better, grouped dash specific includes in original bitcoin files, should save some time solving conflicts when/if merging patches later
* Make local address discovery more robust in CActiveMasternode
* parameter interaction: -masternode=1 -> setting -listen=1
* slightly postpone first run to give net thread a chance to connect to some peers
* make sure local address detected in CActiveMasternode::ManageStateInitial is valid
* Simplified address detection logic
* locks in PS
* lock in governance
* locks in IS
* lock in ProcessGetData
* locks in CMasternodeSync
* centralize mnodeman.Check call
* locks order in mnpayments
* use current block chainTip when possible (less locks)
* add missing lock in CountInputsWithAmount
* fix deadlock RequestLowDataPaymentBlocks/IsTransactionValid
* LOCK2 in CheckMnbAndUpdateMasternodeList, CheckAndUpdate, SendVerifyRequest
* LOCK(cs) is not needed here
* Decouple governance init actions from serialization
Should fix this:
```
Assertion failed: lock governance.cs not held in governance-classes.cpp:117; locks held:
cs_Shutdown init.cpp:200 (TRY)
cs ./governance.h:195
cs governance.cpp:835
Abort trap: 6
```
* Fix CGovernanceManager initialization problem
* Added logging messages for cases where CGovernanceManager receives a message while not synced
* Prevent potential NULL pointer dereference
- add "spork" debug category
- move "seen" and "unknown" to new "spork" debug category to reduce log spam
- new/updated/seen messages should not overlap
f0ed400 darkSendSigner.SignMessage() should not return error message
154f1b6 darkSendSigner.VerifyMessage() should return non-localized message, its callers should populate error to debug.log
b130c32 darkSendSigner.GetKeysFromSecret() should not return error message, its callers should handle it
068c178 Added DBG macro in util.h to facilitate debugging
- This macro allows debugging statements (typically printf's or cout's) to
be activated or deactivated with a single comment. Uncomment the line:
//#define ENABLE_DASH_DEBUG
in util.h to enable debugging statements.
- When commented any code wrapped with the DBG() macro will simply be removed
by the preprocessor. When not commented all such wrapped statements will
be present.
- For maximum effectiveness it is best that util.h be the first effective include
in all source files. It is also possible to enable the macro for a single file
by temporarily adding #define ENABLE_DASH_DEBUG to the top of the file.
- Code committed to non-development branches should always have the define
commented.
d125d9b V0.12.1.x -- merging trigger/generic object/superblock changes for testnet phase II
- This commit contains the core governance system changes for 0.12.1. Any unrelated
changes have either been removed or moved to separate commits.
120724c File mode fixes
- Changed mode 0755->0644 on several source files.
c7f9e11 Updated todo reminders
- Added reminder to revert temporary reduction of number of votes
required to trigger superblock to 1 for testing
92adc98 Made CSuperblockManager::IsValidSuperblockHeight an inline function
- This is for efficiency since this function is called often and is
only 1 line of code.
c050ed7 Added comment explaining rationale for no LOCK(cs) in CSuperblock::IsValid
dc933fe Removed unused CSuperblockManager::IsBlockValid function
decec88 Moved calls to SuperblockManager::IsValidSuperblockHeight into IsSuperblockTriggered.
- Since calls to the later function are always protected by the former there's
no reason to keep these separate and this simplifies the code in
masternode-payments.cpp.
8672885 Reestablished expected value check for non-superblocks in IsBlockValueValid
b01cbe0 Changes to IsBlockValueValid to fix rpc test failure
a937c76 Changed include order to allow per file activation of the DBG macro
d116aa5 Fixed IsValidSuperblockHeight logic
- Note this has an effect on testing because we can now only create
1 superblock per day. Devs may need to temporarily change testnet params
for easier testing.
2d0c2de Convert superblock payments to CAmount
- We assume that payment values in JSON are in units of DASH
for consistency with other RPC functions, such as
createrawtransaction.
376b833 Revert temporary testing value for nAbsVoteReq
- Also ensure that number of votes required is never smaller than 1
8c89f4b Cleaned up CSuperblock error handling
- Exceptions are now thrown consistently rather than using a mix of
exceptions and return code checking. Exceptions are now caught only
in AddNewTrigger when the CSuperblock constructor is called. Unnecessary object
status members have been removed.
d7c8a6b Removed utilstrencodings header
- This appears to help with travis tests, for unknown reasons.
c4dfc7a Fixed some minor code review issues
63c3580 Reverted locking change in miner.
- This should have been done in the original PR but was overlooked.
4ab72de Fixed variable name to match common practice and bracket formatting
886a678 Improvements to vote conversion code
- Replaced redundantly defined function with inclusion of governance-vote.h
- Replaced magic numbers with their corresponding constant symbols
0a37966 Reordered governance message handling
86d8505 Refactor CActiveMasternode
+ move strMasterNodeAddr to CActiveMasternode
a005c79 Refactor InstantSend
+ new lock cs_instantsend to protect maps on CleanTransactionLocksList()
+ new DEFAULT_INSTANTSEND_DEPTH constant
+ rename MIN_INSTANTX_PROTO_VERSION to MIN_INSTANTSEND_PROTO_VERSION and bump it
d24182c Refactor Privatesend
+ decouple from util.h and version.h
+ more functions for CDarksendBroadcastTx: constructors, signing, serialization
+ move from rand() to insecure_rand() in general but to GetRand() for session id
+ fix defaults
15a6a16 Implement transaction lock zmq notifications
3bc86a6 always push zmqpubhashtxlock even if tx is not from/to our wallet
568315b fix typo
b6d41d2 fix data size for notification name
339be11 implement zmqpubrawtxlock
70f44f9 update zmq_sub.py with hashtxlock and rawtxlock
3249a63 Fix logging - CTransaction::ToString() always has `\n` at the end of a string, avoid adding empty line
ec03753 make mnw errors and ThreadCheckDarkSendPool less spammy
5b678af fix errorMessage - it should not have `\n`, let output code handle line endings instead
a81cdf7 rename `dash-darksend` thread to `dash-privatesend`
5e4f468 fix/remove outdated code
f1c9678 Break tooltip about third party urls in 2 lines
1c860ce Autobackup refactoring and improvements:
- make nWalletBackups globally accessable
- move autobackup code from init.cpp to walletdb.cpp, see AutoBackupWallet function
- refactor autobackup code to warn user if autobackup failed instead of silently ignoring this fact
- refactor autobackup code to be able to backup fresh new wallet right after it was created, add this functionality to init sequence
- add new cmd-line option "-walletbackupsdir" to specify full path to directory for automatic wallet backups, see GetBackupsDir function
0ba1548 autobackup in PS:
- add nKeysLeftSinceAutoBackup to have some idea how many keys in keypool are more or less safe, show it in advanced PS UI mode and in rpc output for privatesend and getwalletinfo commands
- add autobackups support in PrivateSend mixing both in daemon and QT mode, warn user if number of keys left since last autobackup is very low or even stop mixing completely if it's too low
f3a2494 Warn about a special case - less than 60 seconds between restarts i.e. backup file name is the same as previos one. Continue and do not disable automatic backups in this case
.
e7b56bd Refactor to address locked wallets issue, replenish keypool and re-initialize autobackup on unlock (only if was disabled due to keypool issue)
Adjust few message strings.
- use "" account address instead
- remove `collateralPubKey` and `SetCollateralAddress()` from darksend and create `dummyScriptPubkey` and `InitDummyScriptPubkey()` in masternodeman instead
- initialize `dummyScriptPubkey` before loading cache otherwise MNs could be removed because of the invalid tx
- make logthreadnames work correctly without logtimestamps (and with emty strings again)
- fix crash in debug (it3)
- log debug info about locks in one line
- show actual DS rounds instead of n/a in coin control while in debug mode
- fix initial string in debug.log: "Bitcoin version" -> "Dash version"
- Syncing process is now event based, rather than timeout based. This means the system can tell when it's done with each step and moves on between phases much faster. In initial testing it seems to be about 10-15x faster and has synced everytime successfully.
- Please remove print debugging when the syncing system is proven to be debugged.
- Add whitelistforcerelay to control forced relaying.
Also renames whitelistalwaysrelay.
Nodes relay all transactions from whitelisted peers, this
gets in the way of some useful reasons for whitelisting
peers-- for example, bypassing bandwidth limitations.
The purpose of this forced relaying is for specialized gateway
applications where a node is being used as a P2P connection
filter and multiplexer, but where you don't want it getting
in the way of (re-)broadcast.
This change makes it configurable with whitelistforcerelay.
- Blacklist -whitelistalwaysrelay; replaced by -whitelistrelay.
Github-Pull: #7439
Rebased-From: 325c725fb689d113e02a
"permit" is currently used to configure transaction filtering, whereas replacement is more to do with the memory pool state than the transaction itself.
Add a configuration option `-permitrbf` to set transaction replacement policy
for the mempool.
Enabling it will enable (opt-in) RBF, disabling it will refuse all
conflicting transactions.
Conflicts:
src/init.cpp
src/main.cpp
src/main.h
Github-Pull: #7386
Rebased-From: b768108d9c
- Always respect GetRequiredFee for wallet txs
- Add sane fallback for fee estimation
- SQUASHME: Fix rpc tests that assumed fallback to minRelayTxFee
Add new commandline option "-fallbackfee" to use when fee estimation does not have sufficient data.
Github-Pull: #7296
Rebased-From: 995b9f3e420a1bbebe58b
9af5f9c Move uiInterface.NotifyBlockTip signal above the core/wallet signal - This will keep getbestblockhash more in sync with blocknotify callbacks (Jonas Schnelli)
4082e46 [Qt] call GuessVerificationProgress synchronous during core signal, pass double over UI signal (Jonas Schnelli)
947d20b [Qt] reduce cs_main in getVerificationProgress() (Jonas Schnelli)
e6d50fc [Qt] update block tip (height and date) without locking cs_main, update always (each block) (Jonas Schnelli)
012fc91 NotifyBlockTip signal: switch from hash (uint256) to CBlockIndex* - also adds a boolean for indication if the tip update was happening during initial sync - emit notification also during initial sync (Jonas Schnelli)
a46f87f Initialize logging before we do parameter interaction (Jonas Schnelli)
df66147 Move -blocksonly parameter interaction to the new ParameterInteraction() function (Jonas Schnelli)
68354e7 [QT] Call inits parameter interaction before we create the options model (Jonas Schnelli)
411b05a Refactor parameter interaction, call it before AppInit2() (Jonas Schnelli)
1) Chainparams: Explicit CChainParams arg for main:
-AcceptBlock
-AcceptBlockHeader
-ActivateBestChain
-ConnectTip
-InitBlockIndex
-LoadExternalBlockFile
-VerifyDB parametric constructor
2) Also pickup more Params()\. in main.cpp
3) Pass nPruneAfterHeight explicitly to new FindFilesToPrune() in main.cpp
- use defaults in cmd line args/help
- make liquidity provider param interaction more verbose
- allow to override UI restrictions (rounds/amount) from cmd line
This continues/fixes #6719.
`event_base_loopbreak` was not doing what I expected it to, at least in
libevent 2.0.21.
What I expected was that it sets a timeout, given that no other pending
events it would exit in N seconds. However, what it does was delay the
event loop exit with 10 seconds, even if nothing is pending.
Solve it in a different way: give the event loop thread time to exit
out of itself, and if it doesn't, send loopbreak.
This speeds up the RPC tests a lot, each exit incurred a 10 second
overhead, with this change there should be no shutdown overhead in the
common case and up to two seconds if the event loop is blocking.
As a bonus this breaks dependency on boost::thread_group, as the HTTP
server minds its own offspring.
58ef0ff doc: update docs for Tor listening (Wladimir J. van der Laan)
68ccdc4 doc: Mention Tor listening in release notes (Wladimir J. van der Laan)
09c1ae1 torcontrol improvements and fixes (Wladimir J. van der Laan)
2f796e5 Better error message if Tor version too old (Peter Todd)
8f4e67f net: Automatically create hidden service, listen on Tor (Wladimir J. van der Laan)
- Force AUTHCOOKIE size to be 32 bytes: This provides protection against
an attack where a process pretends to be Tor and uses the cookie
authentication method to nab arbitrary files such as the
wallet
- torcontrol logging
- fix cookie auth
- add HASHEDPASSWORD auth, fix fd leak when fwrite() fails
- better error reporting when cookie file is not ok
- better init/shutdown flow
- stop advertizing service when disconnected from tor control port
- COOKIE->SAFECOOKIE auth
69d373f Don't wipe the sigcache in TestBlockValidity (Pieter Wuille)
0b9e9dc Evict sigcache entries that are seen in a block (Pieter Wuille)
830e3f3 Make sigcache faster and more efficient (Pieter Wuille)
Starting with Tor version 0.2.7.1 it is possible, through Tor's control socket
API, to create and destroy 'ephemeral' hidden services programmatically.
https://stem.torproject.org/api/control.html#stem.control.Controller.create_ephemeral_hidden_service
This means that if Tor is running (and proper authorization is available),
bitcoin automatically creates a hidden service to listen on, without user
manual configuration. This will positively affect the number of available
.onion nodes.
- When the node is started, connect to Tor through control socket
- Send `ADD_ONION` command
- First time:
- Make it create a hidden service key
- Save the key in the data directory for later usage
- Make it redirect port 8333 to the local port 8333 (or whatever port we're listening on).
- Keep control socket connection open for as long node is running. The hidden service will
(by default) automatically go away when the connection is closed.
6342a48 Init: Use DEFAULT_TRANSACTION_MINFEE in help message (MarcoFalke)
a9c73a1 [wallet] Add comments for doxygen (MarcoFalke)
6b0e622 [wallet] Refactor to use new MIN_CHANGE (MarcoFalke)
a6efc01 Bugfix: Omit wallet-related options from -help when wallet is disabled (Luke Dashjr)
5f9260f Bugfix: If genproclimit is omitted to RPC setgenerate, don't change it; also show correct default in getmininginfo (Luke Dashjr)
420a82f Bugfix: Describe dblogsize option correctly (it refers to the wallet database, not memory pool) (Luke Dashjr)
caa3d42 Bugfix: RPC: blockchain: Display correct defaults in help for verifychain method (Luke Dashjr)
Moves the call Initialize() from init.cpp to CreateWithArguments() and handles the
return value. Moves the call Shutdown() from init.cpp to destructor.
Changes Initialize() and Shutdown() to protected members.
* -maxuploadtarget can be set in MiB
* if <limit> - ( time-left-in-24h-cycle / 600 * MAX_BLOCK_SIZE ) has reach, stop serve blocks older than one week and filtered blocks
* no action if limit has reached, no guarantee that the target will not be surpassed
* add outbound limit informations to rpc getnettotals
After each transaction which is added to mempool, we first call
Expire() to remove old transactions, then throwing away the
lowest-feerate transactions.
After throwing away transactions by feerate, we set the minimum
relay fee to the maximum fee transaction-and-dependant-set we
removed, plus the default minimum relay fee.
After the next block is received, the minimum relay fee is allowed
to decrease exponentially. Its halflife defaults to 12 hours, but
is decreased to 6 hours if the mempool is smaller than half its
maximum size, and 3 hours if the mempool is smaller than a quarter
its maximum size.
The minimum -maxmempool size is 40*-limitdescendantsize, as it is
easy for an attacker to play games with the cheapest
-limitdescendantsize transactions. -maxmempool defaults to 300MB.
This disables high-priority transaction relay when the min relay
fee adjustment is >0 (ie when the mempool is full). When the relay
fee adjustment drops below the default minimum relay fee / 2 it is
set to 0 (re-enabling priority-based free relay).
(note the 9x multiplier on (void*)'s for CTxMemPool::DynamicMemoryUsage
was accidentally introduced in 5add7a7 but should have waited for this
commit which adds the extra index)
ddf98d1 Make RPC tests cope with server-side timeout between requests (Wladimir J. van der Laan)
2190ea6 rpc: Split option -rpctimeout into -rpcservertimeout and -rpcclienttimeout (Wladimir J. van der Laan)
8b2d6ed http: Disable libevent debug logging, if not explicitly enabled (Wladimir J. van der Laan)
5ce43da init: Ignore SIGPIPE (Wladimir J. van der Laan)
The two timeouts for the server and client, are essentially different:
- In the case of the server it should be a lower value to avoid clients
clogging up connection slots
- In the case of the client it should be a high value to accomedate slow
responses from the server, for example for slow queries or when the
lock is contended
Split the options into `-rpcservertimeout` and `-rpcclienttimeout` with
respective defaults of 30 and 900.
Associate with each CTxMemPoolEntry all the size/fees of descendant
mempool transactions. Sort mempool by max(feerate of entry, feerate
of descendants). Update statistics on-the-fly as transactions enter
or leave the mempool.
Also add ancestor and descendant limiting, so that transactions can
be rejected if the number or size of unconfirmed ancestors exceeds
a target, or if adding a transaction would cause some other mempool
entry to have too many (or too large) a set of unconfirmed in-
mempool descendants.
Ignore SIGPIPE on all non-win32 OSes, otherwise an unexpectedly disconnecting
RPC client will terminate the application. This problem was introduced
with the libhttp-based RPC server.
Fixes#6660.
Continues Johnathan Corgan's work.
Publishing multipart messages
Bugfix: Add missing zmq header includes
Bugfix: Adjust build system to link ZeroMQ code for Qt binaries
- refactor initialization/fix initial values
- use global `fEnableInstantX`
- rpc output: `confirmations` (i.e. total) and `bcconfirmations` (blockchain only), fixes#593 also
- throw error in UI before submiting IX if it violates max amount
Lets nodes advertise that they offer bloom filter support explicitly.
The protocol version bump allows SPV nodes to assume that NODE_BLOOM is
set if NODE_NETWORK is set for pre-70011 nodes.
Also adds an option to turn bloom filter support off for nodes which
advertise a version number >= 70011. Nodes attempting to use bloom
filters on such protocol versions are banned, and a later upgade
should drop nodes of an older version which attempt to use bloom
filters.
Much code stolen from Peter Todd.
Implements BIP 111
d528025 Revert "rpc-tests: re-enable rpc-tests for Windows" (Wladimir J. van der Laan)
1e700c9 doc: update deps in build-unix.md after libevent (Wladimir J. van der Laan)
26c9b83 Move windows socket init to utility function (Wladimir J. van der Laan)
4be0b08 libevent: Windows reuseaddr workaround in depends (Cory Fields)
3a174cd Fix race condition between starting HTTP server thread and setting EventBase() (Wladimir J. van der Laan)
6d2bc22 Document options for new HTTP/RPC server in --help (Wladimir J. van der Laan)
be33f3f Implement RPCTimerHandler for Qt RPC console (Wladimir J. van der Laan)
57d85d9 doc: mention SSL support dropped for RPC in release notes (Wladimir J. van der Laan)
40b556d evhttpd implementation (Wladimir J. van der Laan)
ee2a42b tests: GET requests cannot have request body, use POST in rest.py (Wladimir J. van der Laan)
6e996d3 tests: fix qt payment test (Cory Fields)
3140ef9 build: build-system changes for libevent (Wladimir J. van der Laan)
a9af234 libevent: add depends (Cory Fields)
6a21dd5 Remove rpc_boostasiotocnetaddr test (Wladimir J. van der Laan)
8f9301c qa: Remove -rpckeepalive tests from httpbasics (Wladimir J. van der Laan)
51fcfc0 doc: remove documentation for rpcssl (Wladimir J. van der Laan)
Split StartHTTPServer into InitHTTPServer and StartHTTPServer to give
clients a window to register their handlers without race conditions.
Thanks @ajweiss for figuring this out.
- *Replace usage of boost::asio with [libevent2](http://libevent.org/)*.
boost::asio is not part of C++11, so unlike other boost there is no
forwards-compatibility reason to stick with it. Together with #4738 (convert
json_spirit to UniValue), this rids Bitcoin Core of the worst offenders with
regard to compile-time slowness.
- *Replace spit-and-duct-tape http server with evhttp*. Front-end http handling
is handled by libevent, a work queue (with configurable depth and parallelism)
is used to handle application requests.
- *Wrap HTTP request in C++ class*; this makes the application code mostly
HTTP-server-neutral
- *Refactor RPC to move all http-specific code to a separate file*.
Theoreticaly this can allow building without HTTP server but with another RPC
backend, e.g. Qt's debug console (currently not implemented) or future RPC
mechanisms people may want to use.
- *HTTP dispatch mechanism*; services (e.g., RPC, REST) register which URL
paths they want to handle.
By using a proven, high-performance asynchronous networking library (also used
by Tor) and HTTP server, problems such as #5674, #5655, #344 should be avoided.
What works? bitcoind, bitcoin-cli, bitcoin-qt. Unit tests and RPC/REST tests
pass. The aim for now is everything but SSL support.
Configuration options:
- `-rpcthreads`: repurposed as "number of work handler threads". Still
defaults to 4.
- `-rpcworkqueue`: maximum depth of work queue. When this is reached, new
requests will return a 500 Internal Error.
- `-rpctimeout`: inactivity time, in seconds, after which to disconnect a
client.
- `-debug=http`: low-level http activity logging
Move mempool rejections to debug category `mempoolrej`, to make it possible
to show them without enabling the entire category `mempool` which is
high volume.
- It seems these might cause clients to get stuck in rare cases, plus we sync all of this information from the network when the client loads up anyway. I think it's best to disable these features and see if the clients stop getting stuck on random reboots.
7b79cbd limit total length of user agent comments (Pavol Rusnak)
557f8ea implement uacomment config parameter which can add comments to user agent as per BIP-0014 (Pavol Rusnak)
Previously various user-facing strings have used inconsistent currency units "BTC",
"btc" and "bitcoins". This adds a single constant and uses it for each reference to
the currency unit.
Also adds a description of the unit for --maxtxfee, and adds the missing "amount"
field description to the (deprecated) move RPC command.
Fixes#2007
This checks to see if the system clock appears to be bad and gives a
helpful error message. If the user's clock is set incorrectly, hopefully
they'll abort, fix it, and then save themselves a fruitless resync.
Introduce a PlatformStyle to handle platform-specific customization of
the UI.
This replaces 'scicon', as well as #ifdefs to determine whether to place
icons on buttons.
The selected PlatformStyle defaults to the platform that the application
was compiled on, but can be overridden from the command line with
`-uiplatform=<x>`.
Also fixes the warning from #6328.
- Cache saves masternode payment history
- On startup, the client will find the most recent block and calculate the amount of entries to ask for. The other peer will then send that amount of entries to save bandwidth on restarts.
- Replaced coinbase cache in favor of using the masternode payments voting system only
- Syncing masternode payments now supports up to the syncing the entire payment list
Make it possible to opt-out of the centralized alert system by providing
an option `-noalerts` or `-alerts=0`. The default remains unchanged.
This is a gentler form of #6260, in which I went a bit overboard by
removing the alert system completely.
I intend to add this to the GUI options in another pull after this.
Conflicts:
src/init.cpp
src/main.cpp
Github-Pull: #6274
Rebased-From: 02a6702a82
To protect privacy, do not use UPNP when a proxy is set. The user may
still specify -listen=1 to listen locally (for a hidden service), so
don't rely on this happening through -listen.
Fixes#2927.
Conflicts:
src/init.cpp
Rebased-From: 8c35b6f3be
Github-Pull: #6153
Prevents stomping on debug logs in datadirs that are locked by other
instances and lost parameter interaction messages that can get wiped by
ShrinkDebugFile().
The log is now opened explicitly and all emitted messages are buffered
until this open occurs. The version message and log cut have also been
moved to the earliest possible sensible location.
