## Issue being fixed or feature implemented
Implementation of accepted proposal:
https://www.dashcentral.org/p/TREASURY-REALLOCATION-60-20-20
## What was done?
Once Masternode Reward Location Reallocation activates:
- Treasury is bumped to 20% of block subsidy.
- Block reward shares are immediately set to 75% for MN and 25% miners.
(Previous reallocation periods are dropped)
MN reward share should be 75% of block reward in order to represent 60%
of the block subsidy. (according to the proposal)
- `governancebudget` is returned from `getgovernanceinfo` RPC.
## How Has This Been Tested?
`block_reward_reallocation_tests`
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
## Motivation
CoinJoin's subsystems are initialized by variables and managers that
occupy the global context. The _extent_ to which these subsystems
entrench themselves into the codebase is difficult to assess and moving
them out of the global context forces us to enumerate the subsystems in
the codebase that rely on CoinJoin logic and enumerate the order in
which components are initialized and destroyed.
Keeping this in mind, the scope of this pull request aims to:
* Reduce the amount of CoinJoin-specific entities present in the global
scope
* Make the remaining usage of these entities in the global scope
explicit and easily searchable
## Additional Information
* The initialization of `CCoinJoinClientQueueManager` is dependent on
blocks-only mode being disabled (which can be alternatively interpreted
as enabling the relay of transactions). The same applies to
`CBlockPolicyEstimator`, which `CCoinJoinClientQueueManager` depends.
Therefore, `CCoinJoinClientQueueManager` is only initialized if
transaction relaying is enabled and so is its scheduled maintenance
task. This can be found by looking at `init.cpp`
[here](93f8df1c31/src/init.cpp (L1681-L1683)),
[here](93f8df1c31/src/init.cpp (L2253-L2255))
and
[here](93f8df1c31/src/init.cpp (L2326-L2327)).
For this reason, `CBlockPolicyEstimator` is not a member of `CJContext`
and its usage is fulfilled by passing it as a reference when
initializing the scheduling task.
* `CJClientManager` has not used `CConnman` or `CTxMemPool` as `const`
as existing code that is outside the scope of this PR would cast away
constness, which would be unacceptable. Furthermore, some logical paths
are taken that will grind to a halt if they are stored as `const`.
Examples of such a call chains would be:
* `CJClientManager::DoMaintenance >
CCoinJoinClientManager::DoMaintenance > DoAutomaticDenominating >
CCoinJoinClientSession::DoAutomaticDenominating >
CCoinJoinClientSession::StartNewQueue > CConnman::AddPendingMasternode`
which modifies `CConnman::vPendingMasternodes`, which is non-const
behaviour
* `CJClientManager::DoMaintenance >
CCoinJoinClientManager::DoMaintenance > DoAutomaticDenominating >
CCoinJoin::IsCollateralValid > AcceptToMemoryPool` which adds a
transaction to the memory pool, which is non-const behaviour
* There were cppcheck [linter
failures](https://github.com/dashpay/dash/pull/5337#issuecomment-1685084688)
that seemed to be caused by the usage of `Assert` in
`coinjoin/client.h`. This seems to be resolved by backporting
[bitcoin#24714](https://github.com/bitcoin/bitcoin/pull/24714). (Thanks
@knst!)
* Depends on #5546
---------
Co-authored-by: Kittywhiskers Van Gogh <63189531+kittywhiskers@users.noreply.github.com>
Co-authored-by: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
## What was done?
- remove dependency of Asset Lock txes on CCreditPool
- new case for functional tests of Asset Locks - more than one output
for Asset Lock tx.
## How Has This Been Tested?
Run unit/functional tests
## Breaking Changes
Slightly changes behaviour of TxMempool. Tx can be accepted in mempool
even if Asset Unlock transaction with same index is already mined. But
final consensus rules are same.
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone
fa4632c41714dfaa699bacc6a947d72668a4deef test: Move boost/stdlib includes last (MarcoFalke)
fa488f131fd4f5bab0d01376c5a5013306f1abcd scripted-diff: Bump copyright headers (MarcoFalke)
fac5c373006a9e4bcbb56843bb85f1aca4d87599 scripted-diff: Sort test includes (MarcoFalke)
Pull request description:
When writing tests, often includes need to be added or removed. Currently the list of includes is not sorted, so developers that write tests and have `clang-format` installed will either have an unrelated change (sorting) included in their commit or they will have to manually undo the sort.
This pull preempts both issues by just sorting all includes in one commit.
Please be aware that this is **NOT** a change to policy to enforce clang-format or any other developer guideline or process. Developers are free to use whatever tool they want, see also #18651.
Edit: Also includes a commit to bump the copyright headers, so that the touched files don't need to be touched again for that.
ACKs for top commit:
practicalswift:
ACK fa4632c41714dfaa699bacc6a947d72668a4deef
jonatack:
ACK fa4632c41714dfaa, light review and sanity checks with gcc build and clang fuzz build
Tree-SHA512: 130a8d073a379ba556b1e64104d37c46b671425c0aef0ed725fd60156a95e8dc83fb6f0b5330b2f8152cf5daaf3983b4aca5e75812598f2626c39fd12b88b180
## Issue being fixed or feature implemented
There's one type of output that potentially can be useful for bloom
filter.
It's follow-up for TODO for dashpay/dash#4857.
Asset Lock transactions have:
- standard inputs (covered by regular bloom filter implementation)
- standard outputs (covered by regular bloom filter implementation)
- special outputs that have public key to proof owing this credits on
platform and claiming it.
Asset Unlock transactions have:
- no inputs (no need bloom)
- standard outputs (covered by regular bloom filter implementation)
So far as there's only one special case, let's have this data in the
bloom filter because it can potentially help to show information such as
"Deposit to platform" on mobile clients.
## What was done?
- added special case for Asset Lock transactions for bloom filter
## How Has This Been Tested?
Run unit/functional tests. Doesn't actually tested how bloom filter
works.
## Breaking Changes
N/A
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
## Issue being fixed or feature implemented
This is an implementation of DIP0027 "Credit Asset Locks".
It's a mechanism to fluidly exchange between Dash and credits.
## What was done?
This pull request includes:
- Asset Lock transaction
- Asset Unlock transaction (withdrawal)
- Credit Pool in coinbase
- Unit tests for Asset Lock/Unlock tx
- New functional test `feature_asset_locks.py`
RPC: currently locked amount (credit pool) is available through rpc call
`getblock`.
## How Has This Been Tested?
There added new unit tests for basic checks of transaction validity
(asset lock/unlock).
Also added new functional test "feature_asset_locks.py" that cover
typical cases, but not all corner cases yet.
## Breaking Changes
This feature should be activated as hard-fork because:
- It adds 2 new special transaction and one of them [asset unlock tx]
requires update consensus rulels
- It adds new data in coinbase tx (credit pool)
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**To release DIP 0027**
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
## Issue being fixed or feature implemented
It splits from https://github.com/dashpay/dash/pull/5150/ by
@PastaPastaPasta request.
## What was done?
See commits
## How Has This Been Tested?
Run unit/functional tests
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone
f9abf4ab6d3d3e4d4b7e90723020b5422a141a6f Add logging for CValidationInterface events (Jeffrey Czyz)
6edebacb2191373e76d79a4972d6192300976096 Refactor FormatStateMessage for clarity (Jeffrey Czyz)
72f3227c83810936e7a334304e5fd7c6dab8e91b Format CValidationState properly in all cases (Jeffrey Czyz)
428ac70095253225f64462ee15c595644747f376 Add VALIDATION to BCLog::LogFlags (Jeffrey Czyz)
Pull request description:
Add logging of `CValidationInterface` callbacks using a new `VALIDATIONINTERFACE` log flag (see #12994). A separate flag is desirable as the logging can be noisy and thus may need to be disabled without affecting other logging.
This could help debug issues where there may be race conditions at play, such as #12978.
ACKs for top commit:
jnewbery:
ACK f9abf4ab6d3d3e4d4b7e90723020b5422a141a6f
hebasto:
ACK f9abf4ab6d3d3e4d4b7e90723020b5422a141a6f
ariard:
ACK f9abf4a, only changes since 0cadb12 are replacing log indication `VALIDATIONINTERFACE` by `VALIDATION` and avoiding a forward declaration with a new include
ryanofsky:
Code review ACK f9abf4ab6d3d3e4d4b7e90723020b5422a141a6f. Just suggested changes since last review (thanks!)
Tree-SHA512: 3e0f6e2c8951cf46fbad3ff440971d95d526df2a52a2e4d6452a82785c63d53accfdabae66b0b30e2fe0b00737f8d5cb717edbad1460b63acb11a72c8f5d4236
## Issue being fixed or feature implemented
Move `BuildSimplifiedDiff` to the place it's actually used. This also
resolves 3 circular dependencies we have atm.
## What was done?
mostly trivial move-only changes
## How Has This Been Tested?
it compiles and linter is happy locally
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
3f373659d732a5b1e5fdc692a45b2b8179f66bec Refactor: Replace SigningProvider pointers with unique_ptrs (Andrew Chow)
3afe53c4039103670cec5f9cace897ead76e20a8 Cleanup: Drop unused GUI learnRelatedScripts method (Andrew Chow)
e2f02aa59e3402048269362ff692d49a6df35cfd Refactor: Copy CWallet signals and print function to LegacyScriptPubKeyMan (Andrew Chow)
c729afd0a3b74a3943e4c359270beaf3e6ff8a7b Box the wallet: Add multiple keyman maps and loops (Andrew Chow)
4977c30d59e88a3e5ee248144bcc023debcd895b refactor: define a UINT256_ONE global constant (Andrew Chow)
415afcccd3e5583defdb76e3a280f48e98983301 HD Split: Avoid redundant upgrades (Andrew Chow)
01b4511206e399981a77976deb15785d18db46ae Make UpgradeKeyMetadata work only on LegacyScriptPubKeyMan (Andrew Chow)
4a7e43e8460127a40a7895519587399feff3b682 Store p2sh scripts in AddAndGetDestinationForScript (Andrew Chow)
501acb5538008d98abe79288b92040bc186b93f3 Always try to sign for all pubkeys in multisig (Andrew Chow)
81610eddbc57c46ae243f45d73e715d509f53a6c List output types in an array in order to be iterated over (Andrew Chow)
eb81fc3ee58d3e88af36d8091b9e4017a8603b3c Refactor: Allow LegacyScriptPubKeyMan to be null (Andrew Chow)
fadc08ad944cad42e805228cdd58e0332f4d7184 Locking: Lock cs_KeyStore instead of cs_wallet in legacy keyman (Andrew Chow)
f5be479694d4dbaf59eef562d80fbeacb3bb7dc1 wallet: Improve CWallet:MarkDestinationsDirty (João Barbosa)
Pull request description:
Continuation of wallet boxes project.
Actually makes ScriptPubKeyMan an interface which LegacyScriptPubkeyMan. Moves around functions and things from CWallet into LegacyScriptPubKeyMan so that they are actually separate things without circular dependencies.
***
Introducing the `ScriptPubKeyMan` (short for ScriptPubKeyManager) for managing scriptPubKeys and their associated scripts and keys. This functionality is moved over from `CWallet`. Instead, `CWallet` will have a pointer to a `ScriptPubKeyMan` for every possible address type, internal and external. It will fetch the correct `ScriptPubKeyMan` as necessary. When fetching new addresses, it chooses the `ScriptPubKeyMan` based on address type and whether it is change. For signing, it takes the script and asks each `ScriptPubKeyMan` for whether that `ScriptPubKeyMan` considers that script `IsMine`, whether it has that script, or whether it is able to produce a signature for it. If so, the `ScriptPubKeyMan` will provide a `SigningProvider` to the caller which will use that in order to sign.
There is currently one `ScriptPubKeyMan` - the `LegacyScriptPubKeyMan`. Each `CWallet` will have only one `LegacyScriptPubKeyMan` with the pointers for all of the address types and change pointing to this `LegacyScriptPubKeyMan`. It is created when the wallet is loaded and all keys and metadata are loaded into it instead of `CWallet`. The `LegacyScriptPubKeyMan` is primarily made up of all of the key and script management that used to be in `CWallet`. For convenience, `CWallet` has a `GetLegacyScriptPubKeyMan` which will return the `LegacyScriptPubKeyMan` or a `nullptr` if it does not have one (not yet implemented, but callers will check for the `nullptr`). For purposes of signing, `LegacyScriptPubKeyMan`'s `GetSigningProvider` will return itself rather than a separate `SigningProvider`. This will be different for future `ScriptPubKeyMan`s.
The `LegacyScriptPubKeyMan` will also handle the importing and exporting of keys and scripts instead of `CWallet`. As such, a number of RPCs have been limited to work only if a `LegacyScriptPubKeyMan` can be retrieved from the wallet. These RPCs are `sethdseed`, `addmultisigaddress`, `importaddress`, `importprivkey`, `importpubkey`, `importmulti`, `dumpprivkey`, and `dumpwallet`. Other RPCs which relied on the wallet for scripts and keys have been modified in order to take the `SigningProvider` retrieved from the `ScriptPubKeyMan` for a given script.
Overall, these changes should not effect how everything actually works and the user should experience no difference between having this change and not having it. As such, no functional tests were changed, and the only unit tests changed were those that were directly accessing `CWallet` functions that have been removed.
This PR is the last step in the [Wallet Structure Changes](https://github.com/bitcoin-core/bitcoin-devwiki/wiki/Wallet-Class-Structure-Changes).
ACKs for top commit:
instagibbs:
re-utACK 3f373659d7
Sjors:
re-utACK 3f373659d732a5b1e5fdc692a45b2b8179f66bec (it still compiles on macOS after https://github.com/bitcoin/bitcoin/pull/17261#discussion_r370377070)
meshcollider:
Tested re-ACK 3f373659d732a5b1e5fdc692a45b2b8179f66bec
Tree-SHA512: f8e2b8d9efa750b617691e8702d217ec4c33569ec2554a060141d9eb9b9a3a5323e4216938e2485c44625d7a6e0925d40dea1362b3af9857cf08860c2f344716
## Issue being fixed or feature implemented
Avoid lots of static_cast's from enums to underlying types. Communicate
intention better
## What was done?
implement c++23 inspired ToUnderlying, then see std::to_underlying and
https://en.cppreference.com/w/cpp/types/underlying_type; Then, we use
this instead of static_casts for enums -> underlying type
## How Has This Been Tested?
make check
## Breaking Changes
None
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: Konstantin Akimov <knstqq@gmail.com>
e20c72f9f076681def325b5b5fa53bccda2b0eab Fire TransactionRemovedFromMempool from mempool (251)
Pull request description:
This pull request fires TransactionRemovedFromMempool callbacks from the mempool and cleans up a bunch of code.
It also resolves the `txmempool -> validation -> validationinterface -> txmempool` circular dependency.
Ideally, `validationinterface` is a dumb component that doesn't have any knowledge of the sub-systems it sends its notifications to. The commit that aims to resolve this circular dependency by moving `txmempool` specific code out of `validationinterface` to `txmempool` where it belongs.
ACKs for top commit:
jnewbery:
ACK e20c72f9f076681def325b5b5fa53bccda2b0eab
Tree-SHA512: 354c3ff1113b21a0b511d80d604edfe3846dddae3355e43d1387f68906e54bf5dc01e7c029edc0b8e635b500b2ab97ee50362e2486eb4319f7347ee9a9e6cef3
<!--
*** Please remove the following help text before submitting: ***
Provide a general summary of your changes in the Title above
Pull requests without a rationale and clear improvement may be closed
immediately.
Please provide clear motivation for your patch and explain how it
improves
Dash Core user experience or Dash Core developer experience
significantly:
* Any test improvements or new tests that improve coverage are always
welcome.
* All other changes should have accompanying unit tests (see
`src/test/`) or
functional tests (see `test/`). Contributors should note which tests
cover
modified code. If no tests exist for a region of modified code, new
tests
should accompany the change.
* Bug fixes are most welcome when they come with steps to reproduce or
an
explanation of the potential issue as well as reasoning for the way the
bug
was fixed.
* Features are welcome, but might be rejected due to design or scope
issues.
If a feature is based on a lot of dependencies, contributors should
first
consider building the system outside of Dash Core, if possible.
-->
## Issue being fixed or feature implemented
<!--- Why is this change required? What problem does it solve? -->
<!--- If it fixes an open issue, please link to the issue here. -->
minimizing global uses
## What was done?
<!--- Describe your changes in detail -->
Started the deglobalization, a future PR should be done to continue this
deglobalization
## How Has This Been Tested?
<!--- Please describe in detail how you tested your changes. -->
<!--- Include details of your testing environment, and the tests you ran
to -->
<!--- see how your change affects other areas of the code, etc. -->
## Breaking Changes
<!--- Please describe any breaking changes your code introduces -->
none
## Checklist:
<!--- Go over all the following points, and put an `x` in all the boxes
that apply. -->
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* llmq: move initialization logic to 'LLMQContext', add unique pointer to NodeContext
* llmq: add aliases to LLMQ globals, expose them to RPC via LLMQContext
* rpc: replace most global invocations with LLMQContext aliases
* rpc: replace quorum RPC global invocations with LLMQContext aliases
* llmq: replace individual global member arguments with context pointer
* llmq: pass aliased context pointer instead of individual globals in tests
* llmq: move BLS worker to LLMQContext, remove global
* llmq: move DKG debug manager to LLMQContext, remove global
* llmq: move DKG session manager to LLMQContext, remove global
* llmq: move quorum share manager to LLMQContext, remove global
* llmq: move quorum signing manager to LLMQContext, remove global
ff59bcd3213ef61f2167c0aa60fcaf5afbc20c61 gui: Drop PeerTableModel dependency to ClientModel (João Barbosa)
Pull request description:
Class `PeerTableModel` doesn't actually depend on `ClientModel`.
ACKs for top commit:
Empact:
Code Review ACK ff59bcd321
hebasto:
ACK ff59bcd3213ef61f2167c0aa60fcaf5afbc20c61, tested on Linux Mint 19.3. No changes in behavior are observed.
Tree-SHA512: 29fa3c316c05b8f7b9340e5859bbb8c3a0b826aa7c865c892cfa13b5ad30f822fcaae4e01555f7860cd1727f20b7ef555a808235522a04a6eebaaa7b605f8595
cb8a86d9f952401eaad68b2e3818ce50f7befd91 gui: Remove WalletView and BitcoinGUI circular dependency (João Barbosa)
ac3d10777d65b68862c6deb57594c8fc4d21ca77 gui: Add transactionClicked and coinsSent signals to WalletView (João Barbosa)
Pull request description:
Essentially moves the code in `WalletView::setBitcoinGUI` to the only caller. Two new signals are added beforehand in the first commit so that the connections in `WalletFrame` are all from the wallet view.
ACKs for top commit:
hebasto:
ACK cb8a86d9f952401eaad68b2e3818ce50f7befd91, tested on Linux Mint 19.3.
jonasschnelli:
utACK cb8a86d9f952401eaad68b2e3818ce50f7befd91
Tree-SHA512: 250316cd3689e51c8cded9ccd75963c836dcafa6db25d684f2aa691dea9738895f9140793e0f925784909e39f8257f7e1c7d611e8bd6d6634e1a50333f4ddb1e
3aee10b80b9d9a0f5172fc2ee75f03a37d5c3863 gui: Drop ShutdownWindow dependency to BitcoinGUI (João Barbosa)
61eb058cc10592cfa314ba2209fb370706100e8b gui: Drop BanTableModel dependency to ClientModel (João Barbosa)
Pull request description:
`ShutdownWindow::showShutdownWindow` just needs a widget to center the shutdown window and to borrow its title.
ACKs for top commit:
hebasto:
ACK 3aee10b80b9d9a0f5172fc2ee75f03a37d5c3863, since previous review only suggested change `QWidget` --> `QMainWindow`
jonasschnelli:
utACK 3aee10b80b9d9a0f5172fc2ee75f03a37d5c3863
Tree-SHA512: e15cb6ee274730bd071d3d97b540c5059e5c655248d69a37c3fd00f2aacc6cfcb36b9a65755718027e15482ec8e5e85534c1dc13d0ddb4e0680df03fbf6571f2
* coinjoin: make CCoinJoinServer managed pointer, assign CConnman during init
* coinjoin: make CCoinJoinClientQueueManager managed pointer, assign CConnman during init
* sporks: move spork validation logic downwards after CConnman initialization
* sporks: make CSporkManager a pointer, reduce global invocations
* governance: make CGovernanceManager a pointer, reduce global invocations
* llmq: migrate LLMQ subsystem raw pointers to managed pointers
* masternode: make activeMasternodeManager a managed pointer
* masternode: make masternodeSync a managed pointer, assign CConnman during init
* refactor: make instantsend helper functions class members
* fix: send empty CDeterministicMNList if pointer isn't initialized yet
* fix: refactor governance object retrieval logic across node and ui
Update src/interfaces/node.cpp
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Move wallet enums to walletutil.h
* MOVEONLY: Move key handling code out of wallet to keyman file
Start moving wallet and ismine code to scriptpubkeyman.h, scriptpubkeyman.cpp
The easiest way to review this commit is to run:
git log -p -n1 --color-moved=dimmed_zebra
And check that everything is a move (other than includes and copyrights comments).
This commit is move-only and doesn't change code or affect behavior.
* Refactor: Split up CWallet and LegacyScriptPubKeyMan and classes
This moves CWallet members and methods dealing with keys to a new
LegacyScriptPubKeyMan class, and updates calling code to reference the new
class instead of CWallet.
Most of the changes are simple text replacements and variable substitutions
easily verified with:
git log -p -n1 -U0 --word-diff-regex=.
The only nontrivial chunk of code added is the new LegacyScriptPubKeyMan class
declaration, but this code isn't new and is just selectively copied and moved
from the previous CWallet class declaration. This can be verified with:
git log -p -n1 --color-moved=dimmed_zebra src/wallet/scriptpubkeyman.h src/wallet/wallet.h
or
git diff HEAD~1:src/wallet/wallet.h HEAD:src/wallet/scriptpubkeyman.h
This commit does not change behavior.
* Renamed classes in scriptpubkeyman
* Fixes for conflicts, compilation and linkage errors due to previous commits
* Reordered methods in scriptpubkeyman to make further backports easier
* Reordered methods in scriptpubkeyman to make further backports easier (part II)
* Remove HDChain copy from SigningProvider class
* fixes/suggestions
Co-authored-by: Andrew Chow <achow101-github@achow101.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* refactor(llmq): substitute memberless class llmq::CLLMQUtils with namespace llmq::utils
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* chore: mark functions internal to `llmq::utils` as `static`
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Add HaveKey and HaveCScript to SigningProvider
* Remove CKeyStore and squash into CBasicKeyStore
* Move HaveKey static function from keystore to rpcwallet where it is used
* scripted-diff: rename CBasicKeyStore to FillableSigningProvider
-BEGIN VERIFY SCRIPT-
git grep -l "CBasicKeyStore" | xargs sed -i -e 's/CBasicKeyStore/FillableSigningProvider/g'
-END VERIFY SCRIPT-
* Move KeyOriginInfo to its own header file
* Move various SigningProviders to signingprovider.{cpp,h}
Moves all of the various SigningProviders out of sign.{cpp,h} and
keystore.{cpp,h}. As such, keystore.{cpp,h} is also removed.
Includes and the Makefile are updated to reflect this. Includes were largely
changed using:
git grep -l "keystore.h" | xargs sed -i -e 's;keystore.h;script/signingprovider.h;g'
* Remove CCryptoKeyStore and move all of it's functionality into CWallet
Instead of having a separate CCryptoKeyStore that handles the encryption
stuff, just roll it all into CWallet.
* Fixed cases of mess CWallet functions with CCryptoKeyStore and conflicts
* Move WatchOnly stuff from SigningProvider to CWallet
* Fixes for lint cirtular dependencies to calm linter
Co-authored-by: Andrew Chow <achow101-github@achow101.com>
* Added GET_SNAPSHOT_INFO message handling
* Quorum members by rotation
* Quorum utils functions
* Handle GET_QUORUM_ROTATION_INFO with baseBlockHash from client
* Storing QuorumSnaphots in evoDB when requesting them
* Added DIP Enforcement param
* quorumIndex cache
* Quorum Rotation deployment control
* Usage of Bitsets for storing CQuorumSnapshots
* Correct handling of early quorum quarters
* More asserts
* Corrections
* Handling of quorumIndex
* Refactoring of truncate mechanism
* Various fixes
* Interface correction
* Added template type for indexed cache
* Added quorumIndex into commitmenHash
* Various changes
* Needs to update maqQuorumsCache along with indexedQuorumsCache
* Added CFinalCommitment version 2
* Renamed variables
* Fixes
* Refactoring & correct caching of quorumMembers by rotation
* Added assertions
* Refactoring
* Interface change
* Handling of previous DKG session failure
* Applied refactoring
* Build quarter members improvments
* Merge Quorum Rotation and Decreased fee into one deployment (DIP24)
* Added new LLMQ Type
* Added functional tests + refactoring
* Refactoring
* Spreaded Quorum creation and Quorum Index adaptation
* quorumIndex adaptations
* Added quorumIndex in CFinalCommitment
* Latest work
* Final refactoring
* Batch of refactoring
* Fixes for tests
* Fix for CFinalCommitment
* Fix for Quorums
* Fix
* Small changes
* Thread sync fic
* Safety changes
* Reuse mns when needed
* Refactoring
* More refactoring
* Fixes for rotationinfo handling
* Fix for rotation of members
* Correct order of MNs lists in Quorum Snapshots
* Adding extra logs
* Sync rotation quorums + qrinfo changes
* Fix + extra logs
* Removed redundant field
* Fix for null final commitment + refactoring
* Added timers in tests
* Fix for qrinfo message: quorumdiff and merkleRootQuorums
* Small changes for rotation test
* Remove reading from scanQuorumCache
* Added quorum list output
* Crash fix
* Experimental commit
* apply changes to specialtxman.cpp from specialtx.cpp
* all the changes
* substancially speed up feature_llmq_rotation.py
* reenable asserts, add check for reorgs
* Refactoring
* Added extra logs
* format
* trivial
* drop extra boost includes
* drop ContainsMN
* fix ScanQuorums
* check quorum hash and index in CFinalCommitment::Verify
* fix/tweak tests
* IsQuorumRotationEnabled should be aware of the context
* Calculating members based on earlier block.
* Fix for Quorum Members Cache
* Removed duplicate size of baseBlockHashes
* Adaptations of qrinfo to -8 mn lists
* Introduction of llmqTypeDIP24InstantSend
* Adaptation for llmqTypeDIP24InstantSend
* Adaptations for IS
* bump protocol version
* Added feature_llmq_is_migration test
* Various cleanups
* use unordered_lru_cache for quorumSnapshotCache
* trivial refactor ComputeQuorumMembersByQuarterRotation
* Reduced CFinalCommitment::quorumIndex from 32 to 16 bits
* Keep verified LLMQ relay connections
* Experimental Relay connection fix
* Fix for EnsureQuorumConnections rotation
* Using only valid Mns for checking
* Override of nPowTargetSpacing (devnet only)
* Show penalty score in masternode rpc
* fixups
* Rotation refactoring
* Update src/chainparams.cpp
* Replaced LogPrintf with LogPrint
* IS locking fix once DIP24 activation
* Various cleanup
* Updated MIN_MASTERNODE_PROTO_VERSION
* Introduce LLMQ_TEST_INSTANTSEND reg-test only quorum and actually test switching to dip0024 quorums
* Renamed field lastQuorumHashPerIndex
* Renamed to DIP0024
* chore: update nStartTime and nTimeout for mainnet / testnet for DEPLOYMENT_DIP0024
Co-authored-by: Kittywhiskers Van Gogh <63189531+kittywhiskers@users.noreply.github.com>
Co-authored-by: pasta <pasta@dashboost.org>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
e61de6306fd89fe9aae90253062e7b1b20343f8a Change ismine to take a CWallet instead of CKeyStore (Andrew Chow)
7c611e20007bf5face34d33dffa26c8db67e29ec Move ismine to wallet module (Andrew Chow)
Pull request description:
`IsMine` isn't used outside of the wallet except for the tests. It also doesn't make sense to be outside of the wallet. This PR moves `IsMine` into the wallet module and for it to take a `CWallet` instead of `CKeyStore`. The test that used `IsMine` is also moved to the wallet tests.
This is first [prerequisites](https://github.com/bitcoin-core/bitcoin-devwiki/wiki/Wallet-Class-Structure-Changes#ismine) for the wallet structure changes.
ACKs for commit e61de6:
MarcoFalke:
re-ACK e61de6306f (only change is rebase with git auto-merge)
meshcollider:
Very light code review ACK e61de6306f
Tree-SHA512: 1cb4ad12652aef7922ab7460c6d413e8b9d1855dca78c0a286ae49d5c0765bc7996c55f262c742001d434eb9bd4215dc2cc7aae1b371ee1a82d46b32c17e6341
Co-authored-by: MeshCollider <dobsonsa68@gmail.com>
cb3511b9d Add release notes for importing key origin info change (Andrew Chow)
4c75a69f3 Test importing descriptors with key origin information (Andrew Chow)
02d6586d7 Import KeyOriginData when importing descriptors (Andrew Chow)
3d235dff5 Implement a function to add KeyOriginInfo to a wallet (Andrew Chow)
eab63bc26 Store key origin info in key metadata (Andrew Chow)
345bff601 Remove hdmasterkeyid (Andrew Chow)
bac8c676a Add a method to CWallet to write just CKeyMetadata (Andrew Chow)
e7652d3f6 Add WriteHDKeypath function and move *HDKeypath to util/bip32.{h,cpp} (Andrew Chow)
c45415f73 Refactor keymetadata writing to a separate method (Andrew Chow)
Pull request description:
This PR allows for key origin data as defined by the descriptors document to be imported to the wallet when importing a descriptor using `importmulti`. This allows the `walletprocesspsbt` to include the BIP 32 derivation paths for keys that it is watching that are from a different HD wallet.
In order to make this easier to use, a new field `hdmasterkeyfingerprint` has been added to `getaddressinfo`. Additionally I have removed `hdmasterkeyid` as was planned. I think that this API change is fine since it was going to be removed in 0.18 anyways. `CKeyMetadata` has also been extended to store key origin info to facilitate this.
Tree-SHA512: 9c7794f3c793da57e23c5abbdc3d58779ee9dea3d53168bb86c0643a4ad5a11a446264961e2f772f35eea645048cb60954ed58050002caee4e43cd9f51215097
* refactor: break circular dependencies(-13, +2)
introduces specialtxman, which handles validation of special transactions, specialtx is now simply the primitive underlying type. This breaks a lot of the circular depends
Also removes an unneeded `#include <masternode/payments.h>` in net_processing.cpp, which resolves a circular dependency. (we know it's okay to remove b/c masternode/payments.h isn't included in any header files, and removing it doesn't break compilation)
* format: make clang-format happy
* remove unrelated change
* remove some unneeded includes to `evo/deterministicmns.h`, explicitly include some previously implicitly included includes.
Resolves two circular dependencies
* refactor: remove circular depend, unused include
67f4e9c522 Include core_io.h from core_read.cpp (practicalswift)
eca9767673 Make reasoning about dependencies easier by not including unused dependencies (practicalswift)
Pull request description:
Make reasoning about dependencies easier by not including unused dependencies.
Please note that the removed headers are _not_ "transitively included" by other still included headers. Thus the removals are real.
As an added bonus this change means less work for the preprocessor/compiler. At least 51 393 lines of code no longer needs to be processed:
```
$ git diff -u HEAD~1 | grep -E '^\-#include ' | cut -f2 -d"<" | cut -f1 -d">" | \
sed 's%^%src/%g' | xargs cat | wc -l
51393
```
Note that 51 393 is the lower bound: the real number is likely much higher when taking into account transitively included headers :-)
ACKs for commit 67f4e9:
Tree-SHA512: 0c8868aac59813f099ce53d5307eed7962dd6f2ff3546768ef9e5c4508b87f8210f1a22c7e826c3c06bebbf28bdbfcf1628ed354c2d0fdb9a31a42cefb8fdf13
Co-authored-by: MarcoFalke <falke.marco@gmail.com>
faa1e0fb1712b1f94334e42794163f79988270fd qt: test: Create at most one testing setup (MarcoFalke)
Pull request description:
It is assumed that ideally only one BasicTestingSetup exists at any point in time for each process (due to use of globals).
This assumption is violated in the GUI tests, as a testing setup is created as the first step of the `main` function and then (sometimes) another one for the following test cases.
So, the gui tests create two testing setups:
* `BasicTestingSetup` in `main` (added in fa4a04a5a942d582c62773d815c7e1e9897975d0)
* a testing setup for individual test cases
Avoid that by destructing the testing setup in main after creation and then move the explicit `ECC_Stop` to the only places where it is needed (before and after `apptests`).
ACKs for top commit:
laanwj:
code review ACK faa1e0fb1712b1f94334e42794163f79988270fd
Tree-SHA512: b8edceb7e2a8749e1de3ea80bc20b6fb7d4390bf366bb9817206ada3dc8669a91416f4803c22a0e6c636c514e0c858dcfe04523221f8851b10deaf472f107d82
1ac454a3844b9b8389de0f660fa9455c0efa7140 Enable ShellCheck rules (Hennadii Stepanov)
Pull request description:
Enable some simple ShellCheck rules.
Note for reviewers: `bash` and `shellcheck` on macOS are different from ones on Ubuntu.
For local tests the latest `shellcheck` version 0.6.0 should be used (see #15166).
ACKs for top commit:
practicalswift:
utACK 1ac454a3844b9b8389de0f660fa9455c0efa7140
dongcarl:
utACK 1ac454a
fanquake:
ACK 1ac454a3844b9b8389de0f660fa9455c0efa7140
Tree-SHA512: 8d0a3a5c09fe1a0c22120178f5e6b80f81f746f8c3356b7701ff301c117acb2edea8fe08f08fb54ed73f94b1617515fb239fa28e7ab4121f74872e6494b6f20e
* merge 15638: Move CheckTransaction from lib_server to lib_consensus
* merge 15638: Move policy settings to new src/policy/settings unit
* merge 15638: Move rpc utility methods to rpc/util
* merge 15638: Move rpc rawtransaction util functions to rpc/rawtransaction_util.cpp
* merge 15638: Move several units into common libraries
* merge 15638: Move wallet load functions to wallet/load unit
* merge 15638: Document src subdirectories and different libraries
* [build] Add several util units (cleanup)
* build: resolve missing declarations by re-specifying headers
418d3230f8 Resolve the checkpoints <-> validation CD. (251)
Pull request description:
This pull request attempts to resolve the `checkpoints -> validation -> checkpoints` circular dependency.
The circular dependency is resolved by moving the `CheckPoints::GetLastCheckpoint(const CCheckpointData& data)` function to `validation.cpp` where it used exclusively by the private function `ContextualCheckBlockHeader(const CBlockHeader& block, CValidationState& state, const CChainParams& params, const CBlockIndex* pindexPrev, int64_t nAdjustedTime)`.
ACKs for commit 418d32:
promag:
utACK 418d323, only `GetLastCheckpoint` usage is in `validation.cpp` and so makes sense to move it there.
practicalswift:
utACK 418d3230f86f77dde6e817f502baff8a54b707fa
MarcoFalke:
utACK 418d3230f86f77dde6e817f502baff8a54b707fa
sipa:
utACK 418d3230f86f77dde6e817f502baff8a54b707fa
Tree-SHA512: 03c3556bc192e65f5e3fa76fd545d4ee7d63d3fb06b132f7a1fa6131aa21ddd2e5b2d19e2222dfe524f422daaca30efde219bed188db8c74ff4b088876b5bc16
* include adjustments
* fix macOs build failure
Signed-off-by: pasta <pasta@dashboost.org>
* expcitly include array in spork.h
* sort includes in most files
