3f592b8 [QA] add wallet-rbf test (Jonas Schnelli)
8222e05 Disable wallet fallbackfee by default on mainnet (Jonas Schnelli)
Pull request description:
Removes the default fallback fee on mainnet (but keeps it on testnet/regtest).
Transactions using the fallbackfee in case the fallback fee has not been set are getting rejected.
Tree-SHA512: e54d2594b7f954e640cc513a18b0bfbe189f15e15bdeed4fe02b7677f939bca1731fef781b073127ffd4ce08a595fb118259b8826cdaa077ff7d5ae9495810db
eb91835 Add setter for g_initial_block_download_completed (Jonas Schnelli)
3f56df5 [QA] add NODE_NETWORK_LIMITED address relay and sync test (Jonas Schnelli)
158e1a6 [QA] fix mininode CAddress ser/deser (Jonas Schnelli)
fa999af [QA] Allow addrman loopback tests (add debug option -addrmantest) (Jonas Schnelli)
6fe57bd Connect to peers signaling NODE_NETWORK_LIMITED when out-of-IBD (Jonas Schnelli)
31c45a9 Accept addresses with NODE_NETWORK_LIMITED flag (Jonas Schnelli)
Pull request description:
Eventually connect to peers signalling NODE_NETWORK_LIMITED if we are out of IBD.
Accept and relay NODE_NETWORK_LIMITED peers in addrman.
Tree-SHA512: 8a238fc97f767f81cae1866d6cc061390f23a72af4a711d2f7158c77f876017986abb371d213d1c84019eef7be4ca951e8e6f83fda36769c4e1a1d763f787037
face7220b7 qa: Move common args to bitcoin.conf (MarcoFalke)
Pull request description:
Beside removing duplicates of the same args in the code, this actually helps with debugging after a test failure.
For example, `bitcoin-qt` has `server` turned off, so you'd have to turn it on every time, if you wanted to debug a temporary test datadir created by the test framework.
Also, `keypool` would fill up if you forget to specify `-keypool=1`.
Tree-SHA512: 996bec8738dc0fce7297ab1fc5b4fbe3aa31b9b6241f8c4e685db728925363ccaca6145ad1edc6bee2f360e02ac4b9a53fcdff74eb79de90793393742d52b559
42e1b5d [test] Round target fee to 8 decimals in assert_fee_amount (Karl-Johan Alm)
Pull request description:
The output would produce arbitrary number of decimal points, sometimes resulting in 9 decimals:
```
AssertionError: Fee of 0.00000415 BTC too low! (Should be 0.000006175 BTC)
```
The above looks like the expected fee is 6175 sats when in reality it's 618.
Tree-SHA512: ddbff2926a88890d6e34a58db36f0b15a917a80064be6e40e9bcbec3f05ae6202d02adcd7873733945b043fa121d4a56dd930446ec368078fe1935cbfff898ce
Because the right-hand side of this comparison can be influenced
externally, e.g. via the -maxmempool argument, the existing mempool state,
host memory usage, etc.
The output would produce arbitrary number of decimal points, sometimes resulting in 9 decimals:
AssertionError: Fee of 0.00000415 BTC too low! (Should be 0.000006175 BTC)
The above looks like the expected fee is 6175 sats when in reality it's 618.
Splits signrwatransaction into a wallet version (signrawtransactionwithwallet) and
non-wallet version (signrawtransactionwithkey). signrawtransaction is marked as DEPRECATED
and will call the right signrawtransaction* command as per the parameters in order to
maintain compatibility.
Updated signrawtransactions test to use new RPCs
b22cce014 scripted-diff: validateaddress to getaddressinfo in tests (Andrew Chow)
b98bfc5ed Create getaddressinfo RPC and deprecate parts of validateaddress (Andrew Chow)
1598f3230 [rpc] Move DescribeAddressVisitor to rpc/util (John Newbery)
39633ecd5 [rpc] split wallet and non-wallet parts of DescribeAddressVisitor (John Newbery)
Pull request description:
This PR makes a new RPC command called `getaddressinfo` which relies on the wallet. It contains all of `validateaddress`'s address info stuff. Those parts in `validateaddress` have been marked as deprecated. The tests have been updated to use `getaddressinfo` except the `disablewallet` test which is the only test that actually uses `validateaddress` to validate an address.
Tree-SHA512: ce00ed0f2416200b8de1e0a75e8517c024be0b6153457d302c3879b3491cce28191e7c29aed08ec7d2eeeadc62918f5c43a7cb79cd2e4b6d9291bd83ec31c852
e710387ca9 test: Fix bip68 sequence test to reflect updated rpc error message (Ben Woosley)
Pull request description:
The message changed in #12356, but this test is in the extended test suite, so it didn't fail on CI.
Tree-SHA512: ce800e2636ab7bbba7876aa533e1684e75c37a7d2a119f9c4602fd89ac9215e2e28710a1f27feb642b6737ed858da049ebc52fdd476ff4637e3ac3bb1d8399ce
Change all instances of validateaddress to getaddressinfo since it seems that
no test actually uses validateaddress for actually validating addresses.
-BEGIN VERIFY SCRIPT-
find ./test/functional -path '*py' -not -path ./test/functional/wallet_disable.py -not -path ./test/functional/rpc_deprecated.py -not -path ./test/functional/wallet_address_types.py -exec sed -i'' -e 's/validateaddress/getaddressinfo/g' {} \;
-END VERIFY SCRIPT-
Moves the parts of validateaddress which require the wallet into getaddressinfo
which is part of the wallet RPCs. Mark those parts of validateaddress which
require the wallet as deprecated.
Validateaddress will call getaddressinfo
for the data that both share for right now.
Moves IsMine functions to libbitcoin_common and then links libbitcoin_wallet
before libbitcoin_common in order to prevent linker errors since IsMine is no
longer used in libbitcoin_server.
65682da [tests] bind functional test nodes to 127.0.0.1 (Sjors Provoost)
Pull request description:
Prevents OSX firewall allow-this-application-to-accept-inbound-connections permission popups and is generally safer.
To test, make an arbitrary whitespace change to `src/bitcoind.cpp` and recompile. This normally resets the firewall's memory.
Easiest way to reproduce a popup without running the test suite:
```sh
src/bitcoind -regtest -bind=127.0.0.1 # No popup
src/bitcoind -regtest # Popup
```
Tree-SHA512: ffa92f148a2ead2ceca978c285882979639be23eb31ad6a27aa81df9fdddba5d493719c92c09a351a81d638f6f739c351a721e42168d77ead60abe074df773d6
bb00c95 Consistently use FormatStateMessage in RPC error output (Ben Woosley)
8b8a1c4 Add test for 'mempool min fee not met' rpc error (Ben Woosley)
c04e0f6 Fix 'mempool min fee not met' debug output (Ben Woosley)
Pull request description:
Output the value that is tested, rather than the unmodified fee value.
Prompted by looking into: #11955
Tree-SHA512: fc0bad47d4af375d208f657a6ccbad6ef7f4e2989ae2ce1171226c22fa92847494a2c55cca687bd5a1548663ed3313569bcc31c00d53c0c193a1b865dd8a7657
[tests] update tests from changes to mininode in #11771 - added by @conscott
[tests] trivial update to hex conversion for readability - added by @conscott
95e2e9a [tests] Change invalidtxrequest to use BitcoinTestFramework (John Newbery)
359d067 [tests] Fix flake8 warnings in invalidtxrequest (John Newbery)
c32cf9f [tests] Add P2PDataStore class (John Newbery)
cc046f6 [tests] Reduce NodeConn connection logging from info to debug (John Newbery)
Pull request description:
Next step in #10603
- first commit changes log level for an internal log from INFO to DEBUG. (Not really related, but I started finding the INFO level logging annoying when debuging test failures)
- second commit introduces a `P2PStub` class - a subclass of `NodeConnCB` which has its own block and tx store and responds appropriately to getdata requests. Not all the functionality is used in `invalidtxrequest.py`, but will be used in `invalidblockrequest.py` and `p2p-fullblocktest` when those are changed to use `BitcoinTestFramework`
- third commit tidies up `invalidtxrequest.py`
- fourth commit removes usage of `ComparisonTestFramework`
Tree-SHA512: f3085c73c15d6ce894e401490bce8a7fa7cf52b0c9d135ff7e351f1f6f517c99accab8588fcdc443f39ea8315329aaabd66b2baa32499df5a774737882030373
faefd29 qa: Prepare functional tests for Windows (MarcoFalke)
Pull request description:
* Pass `sys.executable` when calling a python script via the subprocess
module
* Don't remove the log file while it is still open and written to
* Properly use os.pathsep and os.path.sep when modifying the PATH
environment variable
* util-tests: Use os.path.join for Windows compatibility
Ref: #8227
Tree-SHA512: c507a536af104b3bde4366b6634099db826532bd3e7c35d694b5883c550920643b3eab79c76703ca67e1044ed09979e855088f7324321c8d52112514e334d614
fa795cf wallet: Disallow abandon of conflicted txes (MarcoFalke)
Pull request description:
Abandon transactions that are already conflicted is a noop, so don't try and return false/throw instead.
Tree-SHA512: fd2af4149bd2323f7f31fe18685c763790b8589319b4e467b464ab456d5e8971501ab16d124e57a22693666b06ae433ac3e59f0fd6dfbd2be2c6cae8be5bcbd8
a9d0ebc262 Enable flake8 warnings for all currently non-violated rules (practicalswift)
4cbab15e75 tests: Fix accidental redefinition of previously defined variable via list comprehension (practicalswift)
0b9207efbe Enable flake8 warning for "list comprehension redefines 'foo' from line N" (F812) (practicalswift)
Pull request description:
* Enable `flake8` warnings for all currently non-violated rules
* Fix accidental redefinition via list comprehension
Tree-SHA512: 738b87789e99d02abb2c6b8ff58f65c0cbfeb93e3bf320763e033e510ebd0a4f72861bc8faaf42c14a056a5d4659c33dc70a63730a32cc15159559427bf21193
db1cbcc [RPC] Remove deprecated addmultisigaddress return format (John Newbery)
cb28a0b [RPC] Remove deprecated createmultisig object (John Newbery)
ed45c82 [tests] Remove test for deprecated createmultsig option (John Newbery)
d066a1c [rpc] Remove deprecated getmininginfo RPC option (John Newbery)
c6f09c2 [rpc] remove deprecated estimatefee RPC (John Newbery)
a8e437a [tests] Remove estimatefee from rpc_deprecated.py test (John Newbery)
a5623b1 [tests] Remove tests for deprecated estimatefee RPC (John Newbery)
d119f2e [tests] Fix style warnings in feature_fee_estimation.py (John Newbery)
Pull request description:
There were some RPC/RPC options deprecated in v0.16. Those can now be removed from master since v0.16 has been branched.
- `estimatefee` RPC has been removed. The `feature_fee_estimation.py` test has been updated to remove the RPC, but doesn't yet have good coverage of the replacement RPC `estimatesmartfee`. Improving the test coverage should be done in a new PR. (#11031)
- the `errors` field returned by `getmininginfo` has been deprecated and replaced by a `warning` field. (#10858)
- providing addresses as inputs to `createmultisig` has been deprecated. Users should use `addmultisigaddress` instead (#11415)
- The return format from `addmultisigaddress` has changed (#11415)
`getwitnessaddress` was also deprecated in v0.16 and can be removed, but many tests are using that RPC, so it's a larger job to remove. It should be removed in a separate PR (possibly after #11739 and #11398 have been merged and the segwit test code tidied up)
Tree-SHA512: 8ffaa5f6094131339b9e9e468e8b141de4b144697d2271efa2992b80b12eb97849ade3da8df5c1c9400ed4c04e6a029926550a3e5846d2029b644f9e84ac7124
45eea40 Bech32 addresses in dumpwallet (fivepiece)
Pull request description:
Output bech32 addresses in dumpwallet if address type is not as legacy
Tree-SHA512: f6b6f788293779fe6339b94d9b792180e1d1dcb9c8e826caef8693557e1710213ba57891981c17505ace8d67b407eeca6fd9a8825757dd292cca2aa12575d15c
7444149 Document method for reviewers to verify chainTxData (John Newbery)
Pull request description:
This commit adds the final block hash of the window to getchaintxstats
and documents how reviewers can verify changes to chainTxData.
Tree-SHA512: d16abb5f47d058e52660f4d495f1e453205b1b83716d7c810ff62a70338db721386c1808ec1fc8468f514e4d80cc58e3c96eeb3184cbbcb1d07830fa5e53f342
9bb59cf7ba QA: segwit.py: s/find_unspent/find_spendable_utxo/ (Jorge Timón)
Pull request description:
Separated from #8994
It was found out testing that PR but I think this fix should be done even without #8994 the fix is not necessary by luck. Unless I'm missing something.
Tree-SHA512: ba1a970e674878ae2f27ee8bba372fa3b42dafff682374f50e5ddc9896fd8808fef2b2b70c7028f2a7b0dbea9f3e29a757e2cde98970f5761bf414455ba02c09
The specific length of the uacomment is one shorter on `0.16.0` than on
`0.15.99` causing the (stupid) test to fail.
Just match the latter part of the message only.
125f4a4909 [tests] Require all tests to follow naming convention (Anthony Towns)
Pull request description:
Based on top of #11774
Tree-SHA512: 1eb156b5a97b30c203b7b0ad3d2055b391ef825e2e57805c7745b5259a9b1caaa115768ec225452f12f354e550f83e071f9c6fee2c36698b4679191895aab8de
ee11121 Add special error for genesis coinbase to gettransaction (MeshCollider)
Pull request description:
Suggested by sipa here: https://botbot.me/freenode/bitcoin-core-dev/2018-01-23/?msg=96069825&page=2
Just adds a special error message for the genesis block coinbase transaction when using `getrawtransaction`
Tree-SHA512: cd102c7983ec5457b299bff4b6db747d339fda157933a3ac54aec26b1e48b115aa68c1c9e6cb7a916f15c7786273ab558b2b20ab9768544d211e0ae9d1480e34
Makes following changes to fix and tidy up p2p-versionbits-warning.py:
- add node alias in the run() method
- call versionbits_in_alert_file() in a wait_until loop.
- don't clear out the alert.txt file
- explicitly comment why the node needs to be stop-started
- Verify that the node is out of IBD after stop-start (nodes in IBD do
not generate alert messages)
- no need to subclass P2PInterface
* Pass `sys.executable` when calling a python script via the subprocess
module
* Don't remove the log file while it is still open and written to
* Properly use os.pathsep and os.path.sep when modifying the PATH
environment variable
* util-tests: Use os.path.join for Windows compatibility
16f6f59dc [qa] Test fundrawtransaction with change_type option (João Barbosa)
536ddeb17 [rpc] Add change_type option to fundrawtransaction (João Barbosa)
31dbd5af4 [wallet] Add change type to CCoinControl (João Barbosa)
Pull request description:
Adds a new option `change_type` to `fundrawtransaction` RPC. This is useful to override the node `-changetype` argument.
The new option is exclusive to `changeAddress` option, setting both raises a RPC error.
See also #11403, #12119.
Tree-SHA512: 654686444f6125e37015a62f167064d54ec335701534988447be4687fa5ef9c7980a8a07cc0a03fff6ea6c4c1abf0f77a8843d535c4f3fe0bf93f968a4e676e6
596c446 [wallet] use P2WPKH change output if any destination is P2WPKH or P2WSH (Sjors Provoost)
Pull request description:
If `-changetype` is not explicitly set, then regardless of `-addresstype`, the wallet will use a ~`bech32` change address~ `P2WPKH` change output if any destination is `P2WPKH` or `P2WSH`.
This seems more intuitive to me and more in line with the spirit of [BIP-69](https://github.com/bitcoin/bips/blob/master/bip-0069.mediawiki).
When combined with #11991 a QT user could opt to use `bech32` exclusively without having to figure out how to launch with `-changetype=bech32`, although so would #11937.
Tree-SHA512: 9238d3ccd1f3be8dfdd43444ccf45d6bdc6584ced3172a3045f3ecfec4a7cc8999db0cdb76ae49236492a84e6dbf3a1fdf18544d3eaf6d518e1f8bd241db33e7
fae7b14a04 qa: Make TestNodeCLI command optional in send_cli (MarcoFalke)
ffffb10a9f qa: Rename cli.args to cli.options (MarcoFalke)
Pull request description:
Makes the `command` optional, since there are valid bitcoin-cli calls that have no `command`:
* `bitcoin-cli -?`
* `bitcoin-cli -getinfo`
* ...
Also, rename self.args to self.options, since that is the name in the `bitcoin-cli -help` documentation.
Tree-SHA512: f49c06024e78423301d70782946d47c0fb97a26876afba0a1f71ed329f5d7124aee4c2df520c7af74079bf9937851902f7be9c54abecc28dc29274584804d46c
1df206f Disallow using addresses in createmultisig (Andrew Chow)
Pull request description:
This PR should be the last part of #7965.
This PR makes createmultisig only accept public keys and marks the old functionality of accepting addresses as deprecated.
It also splits `_createmultisig_redeemscript` into two functions, `_createmultisig_getpubkeys` and `_createmultisig_getaddr_pubkeys`. `_createmultisig_getpubkeys` retrieves public keys from the RPC parameters and `_createmultisig_getaddr_pubkeys` retrieves addresses' public keys from the wallet. `_createmultisig_getaddr_pubkeys` requires the wallet and is only used by `addwitnessaddress` (except when `createmultisig` is used in deprecated mode).
`addwitnessaddress`'s API is also changed. Instead of returning just an address, it now returns the same thing as `createmultisig`: a JSON object with two fields, address and redeemscript.
Tree-SHA512: a5796e41935ad5e47d8165ff996a8b20d5112b5fc1a06a6d3c7f5513c13e7628a4fd37ec30fde05d8b15abfed51bc250710140f6834b13f64d0a0e47a3817969
ec527c6 Don't allow relative -walletdir paths (Russell Yanofsky)
Pull request description:
This makes it an error to explicitly specify a non-absolute -walletdir path, and also adds a debug.log warning if a relative rather than absolute -datadir path is configured.
Specifying paths relative to the current working directory in a daemon process can be dangerous, because files can fail to be located even if the configuration doesn't change, but the daemon is started up differently.
Specifying a relative -datadir now adds a warning to the debug log. It would not be backwards-compatible to forbid relative -datadir paths entirely, and it could also be inconvenient for command line testing.
Specifying a relative -walletdir now results in a startup error. But since the -walletdir option is new in 0.16.0, there should be no compatibility issues. Another reason not to use working directory paths for -walletdir specifically is that the default -walletdir is a "wallets" subdirectory inside the datadir, so it could be surprising that setting -walletdir manually would choose a directory rooted in a completely different location.
Tree-SHA512: 67cbdae677f82487a9031c5ec96b0205a488ab08718a0f4f49365e025119f3d7f6cfc88ba1eba04c1ecd8b9561a5b2c42e2e1a267af7c08c76b83e5e361f5a31
Also warn if bitcoind is configured to use a relative -datadir path.
Specifying paths relative to the current working directory in a daemon process
can be dangerous, because files can fail to be located even if the
configuration doesn't change, but the daemon is started up differently.
Specifying a relative -datadir now adds a warning to the debug log. It would
not be backwards-compatible to forbid relative -datadir paths entirely, and it
could also be also inconvenient for command line testing.
Specifying a relative -walletdir now results in a startup error. But since the
-walletdir option is new in 0.16.0, there should be no compatibility issues.
Another reason not to use working directory paths for -walletdir specifically
is that the default -walletdir is a "wallets" subdirectory inside the datadir,
so it could be surprising that setting -walletdir manually would choose a
directory rooted in a completely different location.
fa1e69e qa: Sync with validationinterface queue in sync_mempools (MarcoFalke)
Pull request description:
Commit e545dedf72 moved `TransactionAddedToMempool` to the background scheduler thread. Thus, adding a transaction to the mempool will no longer add it to the wallet immediately. Functional tests, that `sync_mempools` and then call into wallet rpcs will race against the scheduler thread.
Fix that race by flushing the scheduler queue.
Fixes#12205; Fixes#12171;
References #9584;
Tree-SHA512: 14d99cff9c4756de9fad412f04e6d8e25bb9a0938f24ed8348de79df5b4ee67763dac5214b1a69e77e60787d81ee642976d1482b1b5637edfc4892a238ed22af
134cdc7 Test walletpassphrase timeout bounds and clamping (Andrew Chow)
0b63e3c Clamp walletpassphrase timeout to 2^(30) seconds and check its bounds (Andrew Chow)
Pull request description:
Fixes#12100
Makes the timeout be clamped to 2^30 seconds to avoid the issue with sign flipping with large timeout values and thus relocking the wallet instantly. Unlocking for at most ~34 years should be sufficient.
Also checks that the timeout is not negative to avoid instant relocks.
Tree-SHA512: 426922f08c54e323d259e25dcdbebc2cd560708a65111ce6051493a7e7c61e79d9da1ea4026cc0d68807d728f5d7c0d7c58168c6ef4167b94cf6c2877af88794
5fecd84 [tests] Remove redundant import in blocktools.py test (Anthony Towns)
9b20bb4 [tests] Check tests conform to naming convention (Anthony Towns)
7250b4e [tests] README.md nit fixes (Anthony Towns)
82b2712 [tests] move witness util functions to blocktools.py (John Newbery)
1e10854 [tests] [docs] update README for new test naming scheme (John Newbery)
Pull request description:
Splitting #11774 into two parts -- this part updates the README with the proposed naming convention, and adds some checks to test_runner.py that the number of tests violating the naming convention doesn't increase too much. Idea is this part of the change should not introduce merge conflicts or require much rebasing, so reviews of the complicated bits won't become invalidated too often; while the second part will just be file renames, which will require regular rebasing and will introduce merge conflicts with pending PRs, but can be merged later, and should also be much easier to review, since it will only include relatively trivial changes.
Tree-SHA512: b96557d41714addbbfe2aed62fb5a48639eaeb1eb3aba30ac1b3a86bb3cb8d796c6247f9c414c4695c4bf54c0ec9968ac88e2f88fb62483bc1a2f89368f7fc80
a14dbff39e Allow multiwallet.py to be used with --usecli (Russell Yanofsky)
f6ade9ce1a [tests] allow tests to be run with --usecli (John Newbery)
ff9a363ff7 TestNodeCLI batch emulation (Russell Yanofsky)
ca9085afc5 Prevent TestNodeCLI.args mixups (Russell Yanofsky)
fcfb952bca Improve TestNodeCLI output parsing (Russell Yanofsky)
Pull request description:
Lack of test coverage was pointed out by @jnewbery in https://github.com/bitcoin/bitcoin/pull/11687#discussion_r158133900
Tree-SHA512: 5f10e31abad11a5edab0da4e2515e39547adb6ab9e55e50427ab2eb7ec9a43d6b896b579b15863e5edc9beee7d8bf1c84d9dabd247be0760a1b9ae39e1e8ee02
