d943491 qa: add a test to detect leaky p2p messages (Cory Fields)
8650bbb qa: Expose on-connection to mininode listeners (Matt Corallo)
5b5e4f8 qa: mininode learns when a socket connects, not its first action (Matt Corallo)
cbfc5a6 net: require a verack before responding to anything else (Cory Fields)
8502e7a net: parse reject earlier (Cory Fields)
c45b9fb net: correctly ban before the handshake is complete (Cory Fields)
66f861a Add a test for P2P inactivity timeouts (Matt Corallo)
b436f92 qa: Expose on-connection to mininode listeners (Matt Corallo)
8aaba7a qa: mininode learns when a socket connects, not its first action (Matt Corallo)
2cbd119 Disconnect peers which we do not receive VERACKs from within 60 sec (Matt Corallo)
266a811 Use MTP for importmulti "now" timestamps (Russell Yanofsky)
3cf9917 Add test to check new importmulti "now" value (Russell Yanofsky)
442887f Require timestamps for importmulti keys (Russell Yanofsky)
This is certainly not exhaustive, but it's better than nothing. Adds checks
for:
- Any message received before sending a version
- Any message received other than version/reject before sending a verack
It also tries to goad the remote into sending a pong, address, or block
announcement.
When importing a watch-only address over importmulti with a specific timestamp,
the wallet's nTimeFirstKey is currently set to 1. After this change, the
provided timestamp will be used and stored as metadata associated with
watch-only key. This can improve wallet performance because it can avoid the
need to scan the entire blockchain for watch only addresses when timestamps are
provided.
Also adds timestamp to validateaddress return value (needed for tests).
Fixes#9034.
Additionally, accept a "now" timestamp, to allow avoiding rescans for keys
which are known never to have been used.
Note that the behavior when "now" is specified is slightly different than the
previous behavior when no timestamp was specified at all. Previously, when no
timestamp was specified, it would avoid rescanning during the importmulti call,
but set the key's nCreateTime value to 1, which would not prevent future block
reads in later ScanForWalletTransactions calls. With this change, passing a
"now" timestamp will set the key's nCreateTime to the current block time
instead of 1.
Fixes#9491
Make sure that RPC tests are actually checking failures correctly by:
- Catching JSON RPC exceptions and verifying the error codes and messages.
- Failing the test case if the JSON RPC exception isn't raised.
A few miscellaneous improvements to rpc-tests.py command line arguments:
- make all arguments start with double dash for consistency
- improve help text and output
- add nozmq argument to explicitly exclude the ZMQ tests
- change 'parallel' to 'jobs'
6dbfe08 [qa] test signrawtransaction merge with missing inputs (Matt Corallo)
ec4f7e4 [qa] Add second input to signrawtransaction test case (Matt Corallo)
691710a [qa] Test that decoderawtransaction throws with extra data appended (Matt Corallo)
922bea9 Better handle invalid parameters to signrawtransaction (Matt Corallo)
7ea0ad5 Fail in DecodeHexTx if there is extra data at the end (Matt Corallo)
Preserve comment, order form, and account strings from the original wallet
transaction. Also set fTimeReceivedIsTxTime and fFromMe fields for consistency
with CWallet::CreateTransaction. The latter two fields don't influence current
wallet behavior, but do record that the transaction originated in the wallet
instead of coming from the network or sendrawtransaction.
7ba0a00 Testing: listsinceblock should not use orphan block height. (Karl-Johan Alm)
ee5c1ce Bug-fix: listsinceblock: use closest common ancestor when a block hash was provided for a chain that was not the main chain. (Karl-Johan Alm)
c9f3062 Add fundrawtransactions new reserveChangeKey option to the release notes (Jonas Schnelli)
9eb325d [QA] Add test for fundrawtransactions new reserveChangeKey option (Jonas Schnelli)
9aa4e6a [Wallet] Add an option to keep the change address key, true by default (Jonas Schnelli)
This command allows a user to increase the fee on a wallet transaction T, creating a "bumper" transaction B.
T must signal that it is BIP-125 replaceable.
T's change output is decremented to pay the additional fee. (B will not add inputs to T.)
T cannot have any descendant transactions.
Once B bumps T, neither T nor B's outputs can be spent until either T or (more likely) B is mined.
Includes code by @jonasschnelli and @ryanofsky
Adds a qa testcase testing the new "-assumevalid" option. The testcase builds
a chain that includes and invalid signature for one of the transactions and
sends that chain to three nodes:
- node0 has no -assumevalid parameter and rejects the invalid chain.
- node1 has -assumevalid set and accepts the invalid chain.
- node2 has -assumevalid set but the invalid block is not buried deep
enough to assume invalid, and so rejects the invalid chain.
02ee4eb Make most_recent_compact_block a pointer to a const (Matt Corallo)
73666ad Add comment to describe callers to ActivateBestChain (Matt Corallo)
962f7f0 Call ActivateBestChain without cs_main/with most_recent_block (Matt Corallo)
0df777d Use a temp pindex to avoid a const_cast in ProcessNewBlockHeaders (Matt Corallo)
c1ae4fc Avoid holding cs_most_recent_block while calling ReadBlockFromDisk (Matt Corallo)
9eb67f5 Ensure we meet the BIP 152 old-relay-types response requirements (Matt Corallo)
5749a85 Cache most-recently-connected compact block (Matt Corallo)
9eaec08 Cache most-recently-announced block's shared_ptr (Matt Corallo)
c802092 Relay compact block messages prior to full block connection (Matt Corallo)
6987219 Add a CValidationInterface::NewPoWValidBlock callback (Matt Corallo)
180586f Call AcceptBlock with the block's shared_ptr instead of CBlock& (Matt Corallo)
8baaba6 [qa] Avoid race in preciousblock test. (Matt Corallo)
9a0b2f4 [qa] Make compact blocks test construction using fetch methods (Matt Corallo)
8017547 Make CBlockIndex*es in net_processing const (Matt Corallo)
If node 0 is sufficiently fast to announce its block to node 1,
node 1 might already have the block by the time the
node_sync_via_rpc loop gets around to node 1, resulting in the
submitblock result "duplicate-inconclusive" as node 1 has the block,
but prefers an alternate chain.
cee1612 reduce number of lookups in TransactionWithinChainLimit (Gregory Sanders)
af9bedb Test for fix of txn chaining in wallet (Gregory Sanders)
5882c09 CreateTransaction: Don't return success with too-many-ancestor txn (Gregory Sanders)
0b2294a SelectCoinsMinConf: Prefer coins with fewer ancestors (Gregory Sanders)
813ede9 [qa] Update compactblocks test for multi-peer reconstruction (Suhas Daftuar)
7017298 Allow compactblock reconstruction when block is in flight (Suhas Daftuar)
c5c92c4 Update python tests for default tx version=2 (BtcDrak)
dab207e Preserve tx version=1 for certain tests (BtcDrak)
c5d746a tiny test fix for mempool_tests (Alex Morcos)
1f0ca1a Bump default transaction version to 2 (BtcDrak)
1a6eacb [QA] add fundrawtransaction test on a locked wallet with empty keypool (Jonas Schnelli)
c24a4f5 [Wallet] Bugfix: FRT: don't terminate when keypool is empty (Jonas Schnelli)
037159c Remove block-request logic from INV message processing (Matt Corallo)
3451203 [qa] Respond to getheaders and do not assume a getdata on inv (Matt Corallo)
d768f15 [qa] Make comptool push blocks instead of relying on inv-fetch (mrbandrews)
Change check_announcement_of_new_block() to wait specifically for the
announcement of the newly created block, instead of waiting for any
announcement at all. A difficult to reproduce failure in
check_announcement_of_new_block() that happened in a travis build
(https://travis-ci.org/bitcoin/bitcoin/jobs/175198367) might have happened
because an older announcement was mistaken for the expected one. The error
looked like:
Assertion failed: Failed
File ".../bitcoin/qa/rpc-tests/test_framework/test_framework.py", line 145, in main
self.run_test()
File ".../bitcoin/build/../qa/rpc-tests/p2p-compactblocks.py", line 787, in run_test
self.test_sendcmpct(self.nodes[1], self.segwit_node, 2, old_node=self.old_node)
File ".../bitcoin/build/../qa/rpc-tests/p2p-compactblocks.py", line 201, in test_sendcmpct
check_announcement_of_new_block(node, test_node, lambda p: p.last_cmpctblock is None and p.last_inv is not None)
File ".../bitcoin/build/../qa/rpc-tests/p2p-compactblocks.py", line 194, in check_announcement_of_new_block
assert(predicate(peer))
This commit also changes the assertion failed message above to include more
detailed information for debug.
Motivation for this change is mainly to make sync_blocks behavior easier to
understand. Behavior is unchanged in the normal case when there are only 2
nodes in the rpc_connections set. When there are more than 2 nodes, the
previous "timeout -= wait" statement wouldn't take into account time spent
waiting for all nodes and as a result could lead to blocking for longer than
the requested timeout.
