77a733a99 [tests] Add additional unit tests for -nofoo edge cases (Anthony Towns)
af173c2be [tests] Check GetChainName works with config entries (Anthony Towns)
fa27f1c23 [tests] Add unit tests for ReadConfigStream (Anthony Towns)
087c5d204 ReadConfigStream: assume the stream is good (Anthony Towns)
6d5815aad Separate out ReadConfigStream from ReadConfigFile (Anthony Towns)
834d30341 [tests] Add unit tests for GetChainName (Anthony Towns)
11b6b5b86 Move ChainNameFromCommandLine into ArgsManager and rename to GetChainName (Anthony Towns)
Pull request description:
This does a bit of refactoring of the configuration handling code in order to add additional tests to make adding support for [test]/[regtest] sections in the config file in #11862 easier. Should not cause any behaviour changes.
Tree-SHA512: 8d2ce1449fc180de03414e7e569d1a21ba1e9f6564e13d3faf3961f710adc725fa0d4ab49b89ebd2baa11ea36ac5018377f693a84037d386a8b8697c9d6db3e9
5460460 Add AbsPathForConfigVal to consolidate datadir prefixing for path args (James O'Beirne)
a1e1305 Clarify help messages for path args to mention datadir prefix (James O'Beirne)
Pull request description:
Change `-conf`'s help message to indicate that relative path values will be prefixed by the datadir path. This behavior probably merits clarification; it's kind of confusing when attempting to specify a configuration file in the current directory with `-conf=bitcoin.conf`, but instead loading the `bitcoin.conf` file in ~/.bitcoin datadir.
### Edit
This PR has been modified to document all cases where relative path configurations are modified to be under datadir. A small refactoring has also been added which consolidates this normalization.
Tree-SHA512: be4fc0595fbeba33d17af08f59898af45e76a44f00719ea0282403b155ac6755584604fab765250a3aa14ed6991882c4d1ccbe601184362c5ba97c886bdda344
be8ab7d08 Create new wallet databases as directories rather than files (Russell Yanofsky)
26c06f24e Allow wallet files not in -walletdir directory (Russell Yanofsky)
d8a99f65e Allow wallet files in multiple directories (Russell Yanofsky)
Pull request description:
This change consists of three commits:
* The first commit is a pure refactoring that removes the restriction that two wallets can only be opened at the same time if they are contained in the same directory.
* The second commit removes the restriction that `-wallet` filenames can only refer to files in the `-walletdir` directory.
* The third commit makes second commit a little safer by changing bitcoin to create wallet databases as directories rather than files, so they can be safely backed up.
All three commits should be straightforward:
* The first commit adds around 20 lines of new code and then updates a bunch of function signatures (generally updating them to take plain fs::path parameters, instead of combinations of strings, fs::paths, and objects like CDBEnv and CWalletDBWrapper).
* The second commit removes two `-wallet` filename checks and adds some test cases to the multiwallet unit test.
* The third commit just changes the mapping from specified wallet paths to bdb environment & data paths.
---
**Note:** For anybody looking at this PR for the first time, I think you can skip the comments before _20 Nov_ and start reading at https://github.com/bitcoin/bitcoin/pull/11687#issuecomment-345625565. Comments before _20 Nov_ were about an earlier version of the PR that didn't include the third commit, and then confusion from not seeing the first commit.
Tree-SHA512: 00bbb120fe0df847cf57014f75f1f7f1f58b0b62fa0b3adab4560163ebdfe06ccdfff33b4231693f03c5dc23601cb41954a07bcea9a4919c8d42f7d62bcf6024
* scripted-diff: Replace #include "" with #include <> (ryanofsky)
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* scripted-diff: Replace #include "" with #include <> (Dash Specific)
-BEGIN VERIFY SCRIPT-
for f in \
src/bls/*.cpp \
src/bls/*.h \
src/evo/*.cpp \
src/evo/*.h \
src/governance/*.cpp \
src/governance/*.h \
src/llmq/*.cpp \
src/llmq/*.h \
src/masternode/*.cpp \
src/masternode/*.h \
src/privatesend/*.cpp \
src/privatesend/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* build: Remove -I for everything but project root
Remove -I from build system for everything but the project root,
and built-in dependencies.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/Makefile.test.include
* qt: refactor: Use absolute include paths in .ui files
* qt: refactor: Changes to make include paths absolute
This makes all include paths in the GUI absolute.
Many changes are involved as every single source file in
src/qt/ assumes to be able to use relative includes.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/qt/dash.cpp
# src/qt/optionsmodel.cpp
# src/qt/test/rpcnestedtests.cpp
* test: refactor: Use absolute include paths for test data files
* Recommend #include<> syntax in developer notes
* refactor: Include obj/build.h instead of build.h
* END BACKPORT #11651 Remove trailing whitespace causing travis failure
* fix backport 11651
Signed-off-by: Pasta <pasta@dashboost.org>
* More of 11651
* fix blockchain.cpp
Signed-off-by: pasta <pasta@dashboost.org>
* Add missing "qt/" in includes
* Add missing "test/" in includes
* Fix trailing whitespaces
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: MeshCollider <dobsonsa68@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
dcfef27 cli: Reject arguments to -getinfo (Wladimir J. van der Laan)
Pull request description:
Currently it's possible to accidentally type e.g.
bitcoin-cli -getinfo getbalance
and get an answer which can be confusing; the trailing arguments are just ignored.
To avoid this, throw an error if the user provides arguments to
`-getinfo`.
Tree-SHA512: 3603e8fa852b884d1dd3b7462db40b092fe8b3390fd4384b4ee330315d797aff711e9f62990012fd4b5a55c8678734ba8497a5488a09ee6b65cf8a99017d6eb4
5e69a43 Add test for bitcoin-cli -getinfo (John Newbery)
3826253 rpc: Handle `getinfo` locally in bitcoin-cli w/ `-getinfo` (Wladimir J. van der Laan)
Pull request description:
Since @laanwj doesn't want to maintain these changes anymore, I will.
This PR is a revival of #8843. I have addressed @jnewbery's comments.
Regarding atomicity, I don't think that is a concern here. This is explicitly a new API and those who use it will know that this is different and that it is not atomic.
Tree-SHA512: 9664ed13a5557bda8c43f34d6527669a641f260b7830e592409b28c845258fc7e0fdd85dd42bfa88c103fea3ecdfede5f81e3d91870e2accba81c6d6de6b21ff
79191f5 Add option -stdinrpcpass to allow RPC password to be read from standard input (Joe Harvell)
Pull request description:
Add a new command-line option to bitcoin-cli that allows the RPC password to be read from standard intput. The purpose of this option is to allow secure RPC password input to bitcoin-cli through an external program that is capable of disabling terminal echo.
This option works similarly to the existing -stdin option, and also works when combined with that option.
I have also written a simple ncurses based program that disables echo, gets input from the terminal and writes to standard output. I couldn't find an existing askpass program that doesn't require graphics libraries, since they are primarily used for getting passwords in a graphics environment. Unless someone can point out a suitable existing askpass program, I plan to submit my ncurses program to the contrib directory separately from this pull request.
Tree-SHA512: 6d426d757de325d928fab42ea8e423273a7dea9f838acb745ccf9f9daa2b47e23044ec1c019cda1a081253f5145fc10f79ae82dfe7f8e952e1f271ec56018e14
df389bc Change wallet method disabled error text (Russell Yanofsky)
e526b3d Fix misleading "Method not found" multiwallet errors (Russell Yanofsky)
Pull request description:
Raise RPC_WALLET_NOT_SPECIFIED instead of RPC_METHOD_NOT_FOUND when a required
wallet filename was not specified in an RPC call.
Also raise more specific RPC_WALLET_NOT_FOUND error instead of
RPC_INVALID_PARAMETER in case an invalid wallet was specified, for consistency.
Tree-SHA512: 6a8d885283f69bcfc28f2e08ac03eff02f9f8160a312ce2a90d868aa52533434fc0b4c4ab86547c2f09392338956df915637eaf7136a4fc105e6c8179f2d0ac8
6b9faf7 [QA] add basic multiwallet test (Jonas Schnelli)
979d0b8 [tests] [wallet] Add wallet endpoint support to authproxy (John Newbery)
76603b1 Select wallet based on the given endpoint (Jonas Schnelli)
32c9710 Fix test_bitcoin circular dependency issue (Jonas Schnelli)
31e0720 Add wallet endpoint support to bitcoin-cli (-usewallet) (Jonas Schnelli)
dd2185c Register wallet endpoint (Jonas Schnelli)
Pull request description:
Alternative for #10829 and #10650.
It adds the most simplest form of wallet based endpoint support (`/wallet/<filename>`).
No v1 and no node/wallet endpoint split.
Tree-SHA512: 23de1fd2f9b48d94682928b582fb6909e16ca507c2ee19e1f989d5a4f3aa706194c4b1fe8854d1d79ba531b7092434239776cae1ae715ff536e829424f59f9be
5c643241e [utils] allow square brackets for ipv6 addresses in bitcoin-cli (John Newbery)
fe4fabaf1 [refactor] move SplitHostPort() into utilstrencodings (John Newbery)
Pull request description:
bitcoin-cli's `-rpcconnect` can accept ipv6 addresses (as long as the libevent version is new enough), but fails to parse ipv6 with square brackets. This PR makes `bitcoin-cli` parse ipv6 in square brackets correctly.
`bitcoin-cli -rpcconnect=[::1] <command>`
should now be equivalent to
`bitcoin-cli -rpcconnect=::1 <command>`
This is useful so the `bitcoin-cli` option can now be in the same format as the `bitcoind` option.
Doesn't include tests. I have a branch that fully tests `bitcoin-cli`, but that's queued behind several intermediate PRs.
- first commit moves `SplitHostPort()` from libbitcoin_common into libbitcoin_util
- second commit adds proper ipv6 parsing to bitcoin-cli
Tree-SHA512: 249d409f10360c989474283341f458cc97364a56a7d004ae6d5f13d8bffe3a51b5dc2484d42218848e2d42cd9c0b13a1b92e94ea19b209f7e91c875c208d8409
* Remove use of -rdynamic
This causes check-symbols to fail horribly and also turned out to be not
required when using libbacktrace. It was only required when using
"backtrace()" from "<execinfo.h>"
* Remove spurious ], from configure.ac
* Add -DENABLE_STACKTRACES=1 to CMakeLists.txt
* Remove unused method my_backtrace_simple_callback
* Use fs::path().filename() instead of basename()
* Add static g_exeFileName and g_exeFileBaseName
* Use .exe.dbg file when available
* Use uint64_t instead of uintptr_t
* Implement GetBaseAddress() for unix and win32
* Implement unified crash_info and use it everywhere before printing crash info
* Print a serialized version of crash_info when there is no debug info
* Implement "-printcrashinfo" command line option
* Compile stacktrace support unconditionally and only make crash hooks conditional
This also renames the --enable-stacktraces option to --enable-crash-hooks
* Enable crash hooks in win/linux Gitian builds
* Try to load .debug file on MacOS and enable crash hooks for osx Gitian builds
* Check for dsymutil and if it needs --flat
* Create .debug files in osx Gitian build
* Handle review comments
* Also print crash description when no stacktrace is available
* Unconditionally add -g1 debug information
Instead of making it dependent on "--enable-crash-hooks". We will need the
debug info every time now, even in release builds.
* Put MacOS debug info into dSYM symbols instead of plain .debug files
* Implement MacOS specific GetBaseAddress
c1082a7 Chainparams: Use the factory for pow tests (Jorge Timón)
2351a06 Chainparams: Get rid of CChainParams& Params(std::string) (Jorge Timón)
f87f362 Chainparams: Use a regular factory for creating chainparams (Jorge Timón)
Tree-SHA512: 359c8a2a1bc9d02db7856d02810240ada28048ac088f878b575597a7255cdb0ffdd1a647085ee67a34c6a7e7ed9e6cfdb61240cf6e75139619b640dbb096072c
f110272 Remove `namespace fs=fs` (Wladimir J. van der Laan)
75594bd torcontrol: Use fs::path instead of std::string for private key path (Wladimir J. van der Laan)
2a5f574 Use fsbridge for fopen and freopen (Wladimir J. van der Laan)
bac5c9c Replace uses of boost::filesystem with fs (Wladimir J. van der Laan)
7d5172d Replace includes of boost/filesystem.h with fs.h (Wladimir J. van der Laan)
19e36bb Add fs.cpp/h (Wladimir J. van der Laan)
Tree-SHA512: 2c34f059dfa6850b9323f3389e9090a6b5f839a457a2960d182c2ecfafd9883c956f5928bb796613402d3aad68ebc78259796a7a313f4a6cfa98aaf507a66842
* Add libbacktrace to depends
This is currently only useful to extract symbols. It fails to gather
stacktraces when compiled with MinGW, so we can only use it to get symbol
information from a stack trace which we gathered outside of libbacktrace.
* Add -mbig-obj to CXXFLAGS for MinGW builds
* Implement stacktraces for C++ exceptions
This is a hack and should only be used for debugging. It works by wrapping
the C++ ABI __wrap___cxa_allocate_exception. The wrapper records a backtrace
and stores it in a global map. Later the stacktrace can be retrieved with
GetExceptionStacktraceStr.
This commit also adds handlers to pretty print uncaught exceptions and
signals.
* Use GetPrettyExceptionStr for all unhandled exceptions
* Use --enable-stacktraces in CI for linux32/linux64
* Register exception translators to pretty print exceptions in unit tests
* Catch and print python exceptions when stopping nodes
Otherwise the code at the bottom is never executed when nodes crash,
leading to no output of debug.log files on Travis.
* Remove now unneeded/unused TestCrash methods
4e7e2e1 Update RPC argument names (John Newbery)
481f289 rpc: Named argument support for bitcoin-cli (Wladimir J. van der Laan)
9adb4e1 rpc: Argument name consistency (Wladimir J. van der Laan)
8d713f7 rpc: Named arguments for rawtransaction calls (Wladimir J. van der Laan)
37a166f rpc: Named arguments for wallet calls (Wladimir J. van der Laan)
78b684f rpc: Named arguments for mining calls (Wladimir J. van der Laan)
b8ebc59 rpc: Named arguments for net calls (Wladimir J. van der Laan)
2ca9dcd test: Add test for RPC named arguments (Wladimir J. van der Laan)
fba1a61 rpc: Named arguments for misc calls (Wladimir J. van der Laan)
286ec08 rpc: Add 'echo' call for testing (Wladimir J. van der Laan)
495eb44 rpc: Named arguments for blockchain calls (Wladimir J. van der Laan)
6f1c76a rpc: Support named arguments (Wladimir J. van der Laan)
5865d41 authproxy: Add support for RPC named arguments (Wladimir J. van der Laan)
05a55a6 Added EVENT_CFLAGS to test makefile to explicitly include libevent headers. (Karl-Johan Alm)
280a559 Added some simple tests for the RAII-style events. (Karl-Johan Alm)
7f7f102 Switched bitcoin-cli.cpp to use RAII unique pointers with deleters. (Karl-Johan Alm)
e5534d2 Added std::unique_ptr<> wrappers with deleters for libevent modules. (Karl-Johan Alm)
e7156ad [RPC] pass HTTP basic authentication username to the JSONRequest object (Jonas Schnelli)
69d1c25 [RPC] Give RPC commands more information about the RPC request (Jonas Schnelli)
23c32a9 rpc: Change JSONRPCRequest to JSONRPCRequestObj (Wladimir J. van der Laan)
027fdb8 When/if the copyright line does not mention Bitcoin Core developers, add a second line to copyrights in -version, About dialog, and splash screen (Luke Dashjr)
cc2095e Rewrite FormatParagraph to handle newlines within input strings correctly (Luke Dashjr)
cddffaf Bugfix: Include COPYRIGHT_HOLDERS_SUBSTITUTION in Makefile substitutions so it gets passed to extract-strings correctly (Luke Dashjr)
29598e4 Move PACKAGE_URL to configure.ac (Luke Dashjr)
78ec83d splashscreen: Resize text to fit exactly (Luke Dashjr)
3cae140 Bugfix: Actually use _COPYRIGHT_HOLDERS_SUBSTITUTION everywhere (Luke Dashjr)
4d5a3df Bugfix: gitian-descriptors: Add missing python-setuptools requirement for OS X (biplist module) (Luke Dashjr)
e4ab5e5 Bugfix: Correct copyright year in Mac DMG background image (Luke Dashjr)
917b1d0 Set copyright holders displayed in notices separately from the package name (Luke Dashjr)
c39a6ff Travis & gitian-osx: Use depends for ds_store and mac_alias modules (Luke Dashjr)
902ccde depends: Add mac_alias to depends (Luke Dashjr)
82a2d98 depends: Add ds_store to depends (Cory Fields)
de619a3 depends: Pass PYTHONPATH along to configure (Cory Fields)
e611b6e macdeploy: Use rsvg-convert rather than cairosvg (Luke Dashjr)
63bcdc5 More complicated package name substitution for Mac deployment (Luke Dashjr)
1a6c67c Parameterise 2009 in translatable copyright strings (Luke Dashjr)
d5f4683 Unify package name to as few places as possible without major changes (Luke Dashjr)
f22f14c doc: mention bitcoin-cli -stdin in release notes (Wladimir J. van der Laan)
92bcca3 rpc: Input-from-stdin mode for bitcoin-cli (Wladimir J. van der Laan)
Fixes: #1345
The actual problem is that GetDataDir has the side effect of creating the
datadir, even if it is not known yet where it really is. This is only
known after reading the config file or when explicitly specified in the
cmd line.
Thus, if GetDataDir gets called before the datadir value from the config
is read, it tries to create it at the default location.
* Fix exit codes:
- `--help`, `--version` etc should exit with `0` i.e. no error ("not enough args" case should still trigger an error)
- error reading config file should exit with error
- slightly refactor AppInitRPC/AppInitRawTx to return standard exit codes (EXIT_FAILURE/EXIT_SUCCESS) or CONTINUE_EXECUTION (-1)
- every main()/exit() should return/use one of EXIT_ codes instead of magic numbers
