eb91835 Add setter for g_initial_block_download_completed (Jonas Schnelli)
3f56df5 [QA] add NODE_NETWORK_LIMITED address relay and sync test (Jonas Schnelli)
158e1a6 [QA] fix mininode CAddress ser/deser (Jonas Schnelli)
fa999af [QA] Allow addrman loopback tests (add debug option -addrmantest) (Jonas Schnelli)
6fe57bd Connect to peers signaling NODE_NETWORK_LIMITED when out-of-IBD (Jonas Schnelli)
31c45a9 Accept addresses with NODE_NETWORK_LIMITED flag (Jonas Schnelli)
Pull request description:
Eventually connect to peers signalling NODE_NETWORK_LIMITED if we are out of IBD.
Accept and relay NODE_NETWORK_LIMITED peers in addrman.
Tree-SHA512: 8a238fc97f767f81cae1866d6cc061390f23a72af4a711d2f7158c77f876017986abb371d213d1c84019eef7be4ca951e8e6f83fda36769c4e1a1d763f787037
e7d9fc5 [qt] navigate to transaction history page after send (Sjors Provoost)
Pull request description:
Before this change QT just remained on the Send tab, which I found confusing. Now it switches to the Transactions tab. This makes it more clear to the user that the send actually succeeded, and here they can monitor progress.
Ideally I would like to highlight the transaction, e.g. by refactoring `TransactionView::focusTransaction(const QModelIndex &idx)` to accept a transaction hash, but I'm not sure how to do that.
Tree-SHA512: 8aa93e03874de8434e18951f8aec47377814c0bcaf7eda4766fc41d5a4e32806346e12e4139e4d45468dfdf0b786f5a7faa393a31b8cd6c65ccac21fb3782c33
5aad635 Use memset() to optimize prevector::resize() (Evan Klitzke)
e46be25 Reduce redundant code of prevector and speed it up (Akio Nakamura)
f0e7aa7 Add new prevector benchmarks. (Evan Klitzke)
Pull request description:
This branch optimizes various `prevector` operations, especially resizing vectors. While profiling the `loadblk` thread I noticed that a lot of time was being spent in `prevector::resize()` which led to this work. I have some data here indicating that it takes up **37%** of the time in `ReadBlockFromDisk()`: https://monad.io/readblockfromdisk.svg
This branch improves things significantly. For trivial types, the new results for the prevector benchmark are:
* `PrevectorClearTrivial` which tests `prevector::clear()` becomes 24.6x faster
* `PrevectorDestructorTrivial` which tests `prevector::~prevector()` becomes 20.5x faster
* `PrevectorResizeTrivial` which tests `prevector::resize()` becomes 20.3x faster
Note that in practice it looks like the prevector is only used to contain `unsigned char` types, which is a trivial type. The benchmarks are testing a bit of an extreme case, but the changes here are motivated by the profiling data for `ReadBlockFromDisk()` I linked to above.
The pull request here consists of a series of three commits:
* The first adds new benchmarks but does not change the prevector code.
* The second is from @AkioNak , and merges some prevector optimizations he submitted in #11988
* The third optimizes `prevector::resize()` to use `memset()` when the prevector contains trivially constructible types
Tree-SHA512: 28f7cbb91a19f9f43b6a5942781d7eb2e3197389186b666f086b69df12bee37773140f765426d715bfb8ebff79cb27a5f1206d0325b54b4aa65598b50fb18368
Before this PR, the linenumber infomaition is output if trailing-space
or tab code was found, but the output occurence is only per a file.
This PR separates the output timing of file name and line number.
As a result, users will find where they need to fix more easily.
Further optimize prevector::resize() (which is called by a number of
other prevector methods) to use memset to initialize memory when the
prevector contains trivial types.
In prevector.h, the code which like item_ptr(size()) apears in the loop.
Both item_ptr() and size() judge whether values are held directly or
indirectly, but in most cases it is sufficient to make that judgement
once outside the loop.
This PR adds 2 private function fill() which has the loop to initialize
by specified value (or iterator of the other prevector's element),
but don't call item_ptr() in their loop.
Other functions(assign(), constructor, operator=(), insert())
that has similar loop, call fill() instead of original loop.
Also, resize() was changed like fill(), but it calls the default
constructor for that element each time.
90ba2df11 Fix missing cs_main lock for GuessVerificationProgress() (Jonas Schnelli)
Pull request description:
`GuessVerificationProgress()` needs `cs_main` due to accessing the `pindex->nChainTx`.
This adds a `AssertLockHeld` in `GuessVerificationProgress()` and adds the missing locks in...
* `LoadChainTip()`
* `ScanForWalletTransactions()` (got missed in #11281)
* GUI, `ClientModel::getVerificationProgress()` <--- **this may have GUI performance impacts**, but could be relaxed later with a cache or something more efficient.
Tree-SHA512: 13302946571422375f32af8e396b9d2c1180f2693ea363aeba9e98c8266ddec64fe7862bfdcbb5a93a4b12165a61eec1e51e4e7d7a8515fa50879095dc163412
face7220b7 qa: Move common args to bitcoin.conf (MarcoFalke)
Pull request description:
Beside removing duplicates of the same args in the code, this actually helps with debugging after a test failure.
For example, `bitcoin-qt` has `server` turned off, so you'd have to turn it on every time, if you wanted to debug a temporary test datadir created by the test framework.
Also, `keypool` would fill up if you forget to specify `-keypool=1`.
Tree-SHA512: 996bec8738dc0fce7297ab1fc5b4fbe3aa31b9b6241f8c4e685db728925363ccaca6145ad1edc6bee2f360e02ac4b9a53fcdff74eb79de90793393742d52b559
ac91ea6 [depends] Allow depends system to support armv7l (Henrik Jonsson)
Pull request description:
Credit for the actual patches goes to @theuni, I just tested them on an armv7l machine.
This change allows the depends system to build our dependencies on 32-bit ARM / armv7l architecture. I.e. with this patch, the following steps now builds fine:
```
$ uname -m
armv7l
$ ./autogen.sh
$ cd depends && make NO_QT=1 && cd ..
$ ./configure --prefix=$(pwd)/depends/armv7l-unknown-linux-gnueabihf
$ make
```
Without this patch, the `cd depends && make NO_QT=1` command fails on armv7l.
Tree-SHA512: 1a81be2f1346e0e7080e83a991d9851f0371438262a34580eda5f43ebd220a3ce1ed0d783c43a0a8aed18082bbb1afc91e5c9bf3f4a36eecc82b6a9b6eff5e4c
42e1b5d [test] Round target fee to 8 decimals in assert_fee_amount (Karl-Johan Alm)
Pull request description:
The output would produce arbitrary number of decimal points, sometimes resulting in 9 decimals:
```
AssertionError: Fee of 0.00000415 BTC too low! (Should be 0.000006175 BTC)
```
The above looks like the expected fee is 6175 sats when in reality it's 618.
Tree-SHA512: ddbff2926a88890d6e34a58db36f0b15a917a80064be6e40e9bcbec3f05ae6202d02adcd7873733945b043fa121d4a56dd930446ec368078fe1935cbfff898ce
Because the right-hand side of this comparison can be influenced
externally, e.g. via the -maxmempool argument, the existing mempool state,
host memory usage, etc.
835a21b Squashed 'src/leveldb/' changes from c521b3ac65..64052c76c5 (MarcoFalke)
Pull request description:
Pull in changes from https://github.com/bitcoin/bitcoin/pull/11674#issuecomment-348174674.
Merges cleanly into master and 0.16 branch.
Tree-SHA512: 819c042c0dfac8dc3078fc182c1e22d4a85b343967475d3389be5b5b056361114d8c9892437cd1dc4b45808c27880c0e166e047afc2c2bd2bbc33e55336a8c33
d2ee6e3 init: Remove translation for `-blockmaxsize` option help (Wladimir J. van der Laan)
Pull request description:
Move `-blockmaxsize`, a deprecated option which is replaced by `-blockmaxweight`, to debug options and remove the translation.
This message is absolutely terrible for translators (esp the `* 4` part).
(for 0.17 we should probably remove this option completely?)
(reported by French Language Coordinator)
Tree-SHA512: 379150c9217672d2f2f93b4c02a3ac638e77ca56fb518e30c56c46d59f89eac422b4f540e70a9abd3c6ad653ac4b786d4734621b18f93804885d81e223f1a908
eacc5b24f8 Declare CMutableTransaction a struct in rawtransaction.h (Ben Woosley)
Pull request description:
Because it's a struct.
Fix for #10579 - this was called out in code review. https://github.com/bitcoin/bitcoin/pull/10579#discussion_r168936821
Tree-SHA512: 10758a667218481de6f50b5ed874e92eb350c621f7a6355fba7da6ab42b09e1764f827e89491c8663e554fcfd23f124b299f968237c6ad1ff7819e211bd7e521
a6e6e39a8b Bugfix: respect user defined configuration file (-conf) when open conf. file from QT settings (Jonas Schnelli)
Pull request description:
Fixes#12488.
In master, opening the configuration file from the GUI settings will always open the file "bitcoin.conf" regardless of the `-conf=` settings.
This PR makes the GUI settings open configuration file function respect the `-conf` option.
Tree-SHA512: fb54cc699b4d2a3947f749fdf5f1a51251ffd67d0f6c6a937a5b80f0ba5a5c1085d0eef190453bbc04696d4d76c2c266de0fe9712e65e4bb36116158b54263d4
Move `-blockmaxsize`, a deprecated option which is replaced by
`-blockmaxweight`, to debug options and remove the translation.
This message is absolutely terrible for translators (esp the `* 4`
part).
The output would produce arbitrary number of decimal points, sometimes resulting in 9 decimals:
AssertionError: Fee of 0.00000415 BTC too low! (Should be 0.000006175 BTC)
The above looks like the expected fee is 6175 sats when in reality it's 618.
