Darksend defaults to a new mode which enables inputs/outputs
of each session to be different. For example 10DRK can be input
and 1DRKx10 can be output. This strengthens the anonymity of
Darksend greatly, which also increasing the usability (Users who
run out of .1DRK denominations can simply turn on Darksend to
split up larger inputs).
LiteMode disables Darksend/Masternodes/InstantX for clients
who want speed and don't need access to these features. UI
for Darksend is also hidden while in this mode.
Crash was caused by Params() usage in CDarkSendPool::CDarkSendPool upon wallet start. I've moved init of the collateral address outside of the class to CDarkSendPool.InitCollateralAddress() instead.
More info regarding KeePass: http://keepass.info/
KeePass integration will use KeePassHttp (https://github.com/pfn/keepasshttp/) to facilitate communications between the client and KeePass. KeePassHttp is a plugin for KeePass 2.x and provides a secure means of exposing KeePass entries via HTTP for clients to consume.
The implementation is dependent on the following:
- crypter.h for AES encryption helper functions.
- rpcprotocol.h for handling RPC communications. Could only be used partially however due some static values in the code.
- OpenSSL for base64 encoding. regular util.h libraries were not used for base64 encoding/decoding since they do not use secure allocation.
- JSON Spirit for reading / writing RPC communications
The following changes were made:
- Added CLI options in help
- Added RPC commands: keepass <genkey|init|setpassphrase>
- Added keepass.h and keepass.cpp which hold the integration routines
- Modified rpcwallet.cpp to support RPC commands
The following new options are available for darkcoind and darkcoin-qt:
-keepass Use KeePass 2 integration using KeePassHttp plugin (default: 0)
-keepassport=<port> Connect to KeePassHttp on port <port> (default: 19455)
-keepasskey=<key> KeePassHttp key for AES encrypted communication with KeePass
-keepassid=<name> KeePassHttp id for the established association
-keepassname=<name> Name to construct url for KeePass entry that stores the wallet passphrase
The following rpc commands are available:
- keepass genkey: generates a base64 encoded 256 bit AES key that can be used for the communication with KeePassHttp. Only necessary for manual configuration. Use init for automatic configuration.
- keepass init: sets up the association between darkcoind and keepass by generating an AES key and sending an association message to KeePassHttp. This will trigger KeePass to ask for an Id for the association. Returns the association and the base64 encoded string for the AES key.
- keepass setpassphrase <passphrase>: updates the passphrase in KeePassHttp to a new value. This should match the passphrase you intend to use for the wallet. Please note that the standard RPC commands walletpassphrasechange and the wallet encrption from the QT GUI already send the updates to KeePassHttp, so this is only necessary for manual manipulation of the password.
Sample initialization flow from darkcoin-qt console (this needs to be done only once to set up the association):
- Have KeePass running with an open database
- Start darkcoin-qt
- Open console
- type: "keepass init" in darkcoin-qt console
- (keepass pops up and asks for an association id, fill that in). Example: mydrkwallet
- response: Association successful. Id: mydrkwalletdarkcoin - Key: AgQkcs6cI7v9tlSYKjG/+s8wJrGALHl3jLosJpPLzUE=
- Edit darkcoin.conf and fill in these values
keepass=1
keepasskey=AgQkcs6cI7v9tlSYKjG/+s8wJrGALHl3jLosJpPLzUE=
keepassid=mydrkwallet
keepassname=testwallet
- Restart darkcoin-qt
At this point, the association is made. The next action depends on your particular situation:
- current wallet is not yet encrypted. Encrypting the wallet will trigger the integration and stores the password in KeePass (Under the 'KeePassHttp Passwords' group, named after keepassname.
- current wallet is already encrypted: use "keepass setpassphrase <passphrase>" to store the passphrase in KeePass.
At this point, the passphrase is stored in KeePassHttp. When Unlocking the wallet, one can use keepass as the passphrase to trigger retrieval of the password. This works from the RPC commands as well as the GUI.
DoAutoDenomination just wrote to the debug.log and because of that users commonly would have a hard time seeing what was happening. This fixes that by setting a status and displaying that status in the overview.
Previously -proxy was not setting the proxy for IsLimited networks, so
if you set your configuration to be onlynet=tor you wouldn't get an
IPv4 proxy set.
The payment protocol gets its proxy configuration from the IPv4 proxy,
and so it would experience a connection leak.
This addresses issue #5355 and also clears up a cosmetic bug where
getinfo proxy output shows nothing when onlynet=tor is set.
Conflicts:
src/init.cpp
Rebased-From: 3c77714134
Github-Issue: #5358
There is no reason to store thousands of orphan transactions;
normally an orphan's parents will either be broadcast or
mined reasonably quickly.
This pull drops the maximum number of orphans from 10,000 down
to 100, and adds a command-line option (-maxorphantx) that is
just like -maxorphanblocks to override the default.
Previously if bitcoind is linked with an OpenSSL which is compiled
without EC support, this is seen as an assertion failure "pKey !=
NULL" at key.cpp:134, which occurs after several seconds. It is an
esoteric piece of knowledge to interpret this as "oops, I linked
with the wrong OpenSSL", and because of the delay it may not even
be noticed.
The new output is
: OpenSSL appears to lack support for elliptic curve cryptography. For
more information, visit
https://en.bitcoin.it/wiki/OpenSSL_and_EC_Libraries
: Initialization sanity check failed. Bitcoin Core is shutting down.
which occurs immediately after attempted startup.
This also blocks in an InitSanityCheck() function which currently only
checks for EC support but should eventually do more. See #4081.
Rebased-From: 4a09e1d
Size specifiers are no longer needed now that we use typesafe tinyformat
for string formatting, instead of the system's sprintf.
No functional changes.
This continues the work in #3735.
Rebased-By: Wladimir J. van der Laan <laanwj@gmail.com>
Rebased-From: 783b182
Use line buffering (instead of block buffering) so that messages arrive
immediately in systemd-journald, tail -f debug.log, and the like.
Rebased-By: Wladimir J. van der Laan <laanwj@gmail.com>
Rebased-From: 283e405
The year is 2014. All supported operating systems have IPv6 support,
most certainly at build time (this doesn't mean that IPv6 is configured,
of course).
If noone is exercising the functionality to disable it, that means it
doesn't get tested, and IMO it's better to get rid of it.
(it's also not used consistently in RPC/boost and Net code...)
Prints the actual version of BerkeleyDB that is linked against, if
wallet support is enabled.
Useful for troubleshooting.
For example:
2014-05-01 07:44:02 Using BerkeleyDB version Berkeley DB 4.8.30: (April 9, 2010)
2014-05-01 07:54:25 Using BerkeleyDB version Berkeley DB 5.1.29: (October 25, 20 11)
- introduce DEFAULT_SCRIPTCHECK_THREADS in main.h
- only show values from -"MAX_HW_THREADS" up to 16 for -par, as it
makes no sense to try to leave more "cores free" than the system
supports anyway
- use the new constant in optionsdialog and remove defaults from
.ui file
