faab63111d8f27335aa1f09c1a48da3be45135de shutdown: Stop threads before resetting ptrs (MarcoFalke)
Pull request description:
On shutdown some threads would continue to run after or during a pointer reset. This leads to occasional segfaults on shutdown.
Fix this by resetting the smart pointers after all threads that might read from them have been stopped.
This should fix:
* A segfault in the txindex thread, that occurs when the txindex destructor is done, but the thread was not yet stopped (as this is done in the base index destructor)
* A segfault in the scheduler thread, which dereferences conman. (e.g. CheckForStaleTipAndEvictPeers)
Tree-SHA512: abbcf67fadd088e10fe8c384fadfb90bb115d5317145ccb5363603583b320efc18131e46384f55a9bc574969013dfcbd08c49e0d42c004ed7212eca193858ab2
082a61c Move scheduler/threadGroup into common-init instead of per-app (Matt Corallo)
Pull request description:
This resolves#12229 which pointed out a shutdown deadlock due to
scheduler/checkqueue having been shut down while network message
processing is still running.
Tree-SHA512: 0c0a76113996b164b0610d3b8c40b396f3e384d165bf098768e31fe3701b00763d0d810ef24702387e2e936fefb9fb900a6225f7417bb0175b585f365d542660
* Introduce SynchronousUpdatedBlockTip signal
This version of UpdatedBlockTip mirrors the asynchronous behavior that we
had before the introduction of asynchronous signal handling.
* Fix tab spacing in validationinterface.cpp
* Invoke CDeterministicMNManager::UpdatedBlockTip from validation thread
It must be invoked synchronously as otherwise things become inconsistent.
* Call CActiveMasternodeManager::Init with block index
pindexNew in UpdatedBlockTip is not necessarily the current tip, so we
shouldn't rely on it in Init(). This is due to the async nature of the
UpdatedBlockTip invocation.
* scripted-diff: Replace #include "" with #include <> (ryanofsky)
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* scripted-diff: Replace #include "" with #include <> (Dash Specific)
-BEGIN VERIFY SCRIPT-
for f in \
src/bls/*.cpp \
src/bls/*.h \
src/evo/*.cpp \
src/evo/*.h \
src/governance/*.cpp \
src/governance/*.h \
src/llmq/*.cpp \
src/llmq/*.h \
src/masternode/*.cpp \
src/masternode/*.h \
src/privatesend/*.cpp \
src/privatesend/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* build: Remove -I for everything but project root
Remove -I from build system for everything but the project root,
and built-in dependencies.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/Makefile.test.include
* qt: refactor: Use absolute include paths in .ui files
* qt: refactor: Changes to make include paths absolute
This makes all include paths in the GUI absolute.
Many changes are involved as every single source file in
src/qt/ assumes to be able to use relative includes.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/qt/dash.cpp
# src/qt/optionsmodel.cpp
# src/qt/test/rpcnestedtests.cpp
* test: refactor: Use absolute include paths for test data files
* Recommend #include<> syntax in developer notes
* refactor: Include obj/build.h instead of build.h
* END BACKPORT #11651 Remove trailing whitespace causing travis failure
* fix backport 11651
Signed-off-by: Pasta <pasta@dashboost.org>
* More of 11651
* fix blockchain.cpp
Signed-off-by: pasta <pasta@dashboost.org>
* Add missing "qt/" in includes
* Add missing "test/" in includes
* Fix trailing whitespaces
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: MeshCollider <dobsonsa68@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
2e9406c Interrupt loading thread after shutdown request (João Barbosa)
Pull request description:
This change (currently) avoids loading the mempool if shutdown is requested.
Tree-SHA512: 3dca3a6ea5b09bd71db0974584d93dfe81819bc0bdbb4d9b6fa0474755306d1403f6c058ecb8211384493a8f7ca3a9134173db744b7344043cfc7d79286c8fd4
a8b5d20 Reset pblocktree before deleting LevelDB file (Sjors Provoost)
Pull request description:
#11043 repaced:
```
delete pblocktree;
pblocktree = new CBlockTreeDB(nBlockTreeDBCache, false, fReset);
```
With:
```
pblocktree.reset(new CBlockTreeDB(nBlockTreeDBCache, false, fReset));
```
This is problematic because `new CBlockTreeDB` tries to delete the existing file, which will fail with `LOCK: already held by process` if it's still open. That's the case for QT.
When QT finds a problem with the index it will ask the user if they want to reindex. At that point it has already opened `blocks/index`. It then runs this [while loop](https://github.com/bitcoin/bitcoin/blob/v0.16.0rc3/src/init.cpp#L1415) again with `fReset = 1`, resulting in the above error.
This change makes that error go away, presumably because `reset()` without an argument closes the file.
Tree-SHA512: fde8b546912f6773ac64da8476673cc270b125aa2d909212391d1a2001b35c8260a8772126b99dfd76b39faaa286feb7c43239185fe584bd4dc2bc04a64044ce
dd2de47 Fix fast-shutdown crash if genesis block was not loaded (Matt Corallo)
1c9394a Fix fast-shutdown hang on ThreadImport+GenesisWait (Matt Corallo)
Pull request description:
The second commit is a much simpler alternative fix for the issue fixed in #12349. To test I made ShutdownRequested() always StartShutdown() after a certain number of calls, which turned up one other hang, fixed in the first commit.
Tree-SHA512: 86bde6ac4b8b4e2cb99fff87dafeed02c0d9514acee6d94455637fb2da9ffc274b5ad31b0a6b9f5bd7b700ae35395f28ddb14ffc65ddda3619aa28df28a5607d
c60c49b Improve help text and behavior of RPC-logging (Akio Nakamura)
Pull request description:
1. It is allowed `libevent` logging to be updated during runtime,
but still described that restriction in the help text.
So we delete these text.
2. Add a descrption about the evaluation order of `<include>` and
`<exclude>` to clarify how debug loggig categories to be set.
3. Add a description about the available logging category `"all"`
which is not explained.
4. Add `"optional"` to the help text of `<include>` and `<exclude>`.
5. Add missing new lines before `"Argument:"`.
6. `"0"`,`"1"` are allowed in both array of `<include>` and `<exclude>`.
`"0"` is **ignored** and `"1"` is treated **same as** `"all"`.
It is confusing, so forbid them.
7. It always returns all logging categories with status.
Fix the help text to match this behavior.
Tree-SHA512: c2142da1a9bf714af8ebc38ac0d82394e2073fc0bd56f136372e3db7b2af3b6746f8d6b0241fe66c1698c208c124deb076be83f07dec0d0a180ad150593af415
* Masternodes must have required services enabled
* Add a comment about missing bits
* Refactor *InitParameterInteraction parts to follow surrounding code logic
Changes:
- move all related param interactions to appropriate places;
- try to softly set required params, complain and fail to start later if smth is not ok.
* Drop redundant code
ec527c6 Don't allow relative -walletdir paths (Russell Yanofsky)
Pull request description:
This makes it an error to explicitly specify a non-absolute -walletdir path, and also adds a debug.log warning if a relative rather than absolute -datadir path is configured.
Specifying paths relative to the current working directory in a daemon process can be dangerous, because files can fail to be located even if the configuration doesn't change, but the daemon is started up differently.
Specifying a relative -datadir now adds a warning to the debug log. It would not be backwards-compatible to forbid relative -datadir paths entirely, and it could also be inconvenient for command line testing.
Specifying a relative -walletdir now results in a startup error. But since the -walletdir option is new in 0.16.0, there should be no compatibility issues. Another reason not to use working directory paths for -walletdir specifically is that the default -walletdir is a "wallets" subdirectory inside the datadir, so it could be surprising that setting -walletdir manually would choose a directory rooted in a completely different location.
Tree-SHA512: 67cbdae677f82487a9031c5ec96b0205a488ab08718a0f4f49365e025119f3d7f6cfc88ba1eba04c1ecd8b9561a5b2c42e2e1a267af7c08c76b83e5e361f5a31
89f0312 Remove redundant pwallet nullptr check (Matt Corallo)
c4784b5 Add a dev notes document describing the new wallet RPC blocking (Matt Corallo)
3ea8b75 Give ZMQ consistent order with UpdatedBlockTip on scheduler thread (Matt Corallo)
cb06edf Fix wallet RPC race by waiting for callbacks in sendrawtransaction (Matt Corallo)
e545ded Also call other wallet notify callbacks in scheduler thread (Matt Corallo)
17220d6 Use callbacks to cache whether wallet transactions are in mempool (Matt Corallo)
5d67a78 Add calls to CWallet::BlockUntilSyncedToCurrentChain() in RPCs (Matt Corallo)
5ee3172 Add CWallet::BlockUntilSyncedToCurrentChain() (Matt Corallo)
0b2f42d Add CallFunctionInQueue to wait on validation interface queue drain (Matt Corallo)
2b4b345 Add ability to assert a lock is not held in DEBUG_LOCKORDER (Matt Corallo)
0343676 Call TransactionRemovedFromMempool in the CScheduler thread (Matt Corallo)
a7d3936 Add a CValidationInterface::TransactionRemovedFromMempool (Matt Corallo)
Pull request description:
Based on #10179, this effectively reverts #9583, regaining most of the original speedups of #7946.
This concludes the work of #9725, #10178, and #10179.
See individual commit messages for more information.
Tree-SHA512: eead4809b0a75d1fb33b0765174ff52c972e45040635e38cf3686cef310859c1e6b3c00e7186cbd17374c6ae547bfbd6c1718fe36f26c76ba8a8b052d6ed7bc9
a357293 Use MakeUnique<Db>(...) (practicalswift)
3e09b39 Use MakeUnique<T>(...) instead of std::unique_ptr<T>(new T(...)) (practicalswift)
8617989 Add MakeUnique (substitute for C++14 std::make_unique) (practicalswift)
d223bc9 Use unique_ptr for pcoinscatcher/pcoinsdbview/pcoinsTip/pblocktree (practicalswift)
b45c597 Use unique_ptr for pdbCopy (Db) and fix potential memory leak (practicalswift)
29ab96d Use unique_ptr for dbenv (DbEnv) (practicalswift)
f72cbf9 Use unique_ptr for pfilter (CBloomFilter) (practicalswift)
8ccf1bb Use unique_ptr for sem{Addnode,Outbound} (CSemaphore) (practicalswift)
73db063 Use unique_ptr for upnp_thread (boost::thread) (practicalswift)
0024531 Use unique_ptr for dbw (CDBWrapper) (practicalswift)
fa6d122 Use unique_ptr:s for {fee,short,long}Stats (TxConfirmStats) (practicalswift)
5a6f768 Use unique_ptr for httpRPCTimerInterface (HTTPRPCTimerInterface) (practicalswift)
860e912 Use unique_ptr for pwalletMain (CWallet) (practicalswift)
Pull request description:
Use `std::unique_ptr` (C++11) where possible.
Rationale:
1. Avoid resource leaks (specifically: forgetting to `delete` an object created using `new`)
2. Avoid undefined behaviour (specifically: double `delete`:s)
**Note to reviewers:** Please let me know if I've missed any obvious `std::unique_ptr` candidates. Hopefully this PR should cover all the trivial cases.
Tree-SHA512: 9fbeb47b800ab8ff4e0be9f2a22ab63c23d5c613a0c6716d9183db8d22ddbbce592fb8384a8b7874bf7375c8161efb13ca2197ad6f24b75967148037f0f7b20c
07c4838 Always return true if AppInitMain got to the end (Matt Corallo)
Pull request description:
This should fix a rare zapwallettxes failure on travis, but also
avoids having init operations (re-adding wallet transactions to
mempool) running after RPC is free'd.
I believe this was the failure at https://travis-ci.org/bitcoin/bitcoin/jobs/311747844 (from #11605).
Tree-SHA512: f0fea8c1b9265e2eeda57043d541380a3e58e4d9388fa24628a52fd56324257fcd7df0ca02e8f77f66fadd68d951893bab0f610ed9fd0a89b2ccd6bad1efa351
de74c62 [Doc] Update bip.md, add support for BIP 159 (Jonas Schnelli)
e054d0e [QA] Add node_network_limited test (Jonas Schnelli)
bd09416 Avoid leaking the prune height through getdata (fingerprinting countermeasure) (Jonas Schnelli)
27df193 Always set NODE_NETWORK_LIMITED bit (Jonas Schnelli)
7caba38 Add NODE_NETWORK_LIMITED flags and min block amount constants (Jonas Schnelli)
Pull request description:
Extracted from #10387.
Does implement BIP159, but only the signalling part. No connections are made to NODE_NETWORK_LIMITED in this PR.
The address relay and connection work (the more complicated part) can then be separated (probably in #10387).
Tree-SHA512: e3218eb4789a9320b0f42dc10f62d30c13c49bdef00443fbe653bee22933477adcfc1cf8f6a95269324560b5721203ed41f3c5e2dd8a98ec2791f6a9d8346b1a
* add new quorum type LLMQ_EVONET
* add params for new quorum type LLMQ_EVONET
* add LLMQ_EVONET to devnet llmqs
* allow modifying of LLMQ_EVONET params on startup
* rename LLMQ_EVONET to LLMQ_DEVNET
* Update src/chainparams.cpp
Co-Authored-By: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
* Update src/chainparams.cpp
Co-authored-by: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
76ea17c79 Add mutex requirement for AddToCompactExtraTransactions(…) (practicalswift)
4616c825a Use -Wthread-safety-analysis if available (+ -Werror=thread-safety-analysis if --enable-werror) (practicalswift)
7e319d639 Fix -Wthread-safety-analysis warnings. Change the sync.h primitives to std from boost. (Matt Corallo)
Pull request description:
* Add mutex requirement for `AddToCompactExtraTransactions(…)`.
* Use `-Wthread-safety-analysis` if available.
* Rebased on top of https://github.com/TheBlueMatt/bitcoin/commits/2017-08-test-10923 - now includes: Fix -Wthread-safety-analysis warnings. Change the sync.h primitives to std from boost.
Tree-SHA512: fb7365f85daa2741c276a1c899228181a8d46af51db7fbbdffceeaff121a3eb2ab74d7c8bf5e7de879bcc5042d00d24cb4649c312d51caba45a3f6135fd8b38f
cffe85f Skip sys::system(...) call in case of empty command (practicalswift)
6fb8f5f Check that -blocknotify command is non-empty before executing (practicalswift)
Pull request description:
Check that `-blocknotify` command is non-empty before executing.
To make the `BlockNotifyCallback(...)` (`-blocknotify`) behaviour consistent with that of:
* `AlertNotify(...)` (`-alertnotify`)
* `AddToWallet(...)` (`-walletnotify`)
Tree-SHA512: 18272166793a5a8b9cc2a727bfbcea53d38c329a55bc975c02db601329d608a61c20e026ce4b616193ecd3810dca4d3e2cb3bf773898a51872008a8dba96763e
5a7c09a test: Add tests for `-debuglogfile` with subdirs (Anthony Towns)
4158734 doc: Update release notes for `-debuglogfile` (Wladimir J. van der Laan)
2323242 test: Add test for `-debuglogfile` (Wladimir J. van der Laan)
cf5f432 Add `-debuglogfile` option (Wladimir J. van der Laan)
Pull request description:
This patch adds an option to configure the name and/or directory of the debug log file.
The user can specify either a relative path, in which case the path is relative to the (network specific) data directory. They can also specify an absolute path to put the log anywhere else in the file system.
Alternative to #11741 that gets rid of the concept of a "log directory" by specifying the path for the specific kind of log, the debug log. Which happens to be the only kind of log we have at this point*, but a hypothetical new kind of log (say, an audit log) would get a new option. This has more flexibility than specifying a directory which has to contain all of them.
\* excluding `db.log` which is internally generated by the wallet database library, but that one moves along with `-walletdir`.
Tree-SHA512: 4434d0e598dc23504e5c9e67fdbaef56db4f0fd490f9f54fd503e69d4dda9b5b69c539e1794ed841e72161b7b1dc3374d2f1193dd431b057566750e56fd8f24b
d31e5c1 Fix shutdown in case of errors during initialization (Wladimir J. van der Laan)
Pull request description:
PR #10286 introduced a few steps which are not robust to early shutdown in initialization.
Stumbled upon this with #11781, not sure if there are other scenarios that can trigger it, but it's good to harden against this in any case.
E.g.
```
$ src/bitcoind -debuglogfile=/dfdf
Error: Could not open debug log file /dfdf
Program received signal SIGSEGV, Segmentation fault.
UnregisterValidationInterface (pwalletIn=0x0) at /.../bitcoin/src/validationinterface.cpp:82
82 g_signals.m_internals->BlockChecked.disconnect(boost::bind(&CValidationInterface::BlockChecked, pwalletIn, _1, _2));
(gdb) bt
#0 UnregisterValidationInterface (pwalletIn=0x0) at /.../bitcoin/src/validationinterface.cpp:82
#1 0x00005555555a11fc in Shutdown () at /.../bitcoin/src/init.cpp:196
#2 0x00005555555961cc in AppInit (argc=<optimized out>, argv=<optimized out>) at /.../bitcoin/src/bitcoind.cpp:183
#3 0x0000555555596249 in main (argc=0, argv=0x555555ecf200) at /.../bitcoin/src/bitcoind.cpp:19
```
Tree-SHA512: 7dd9570a9803514a17781bfadf1edde47e96df4e852cce2f423cab422e005fb94d44e777af1a6ea5167b04a4d889e848ae7a61a7e0e94232247ddea32ee70fc8
abbd230 Move RPC registration out of AppInitParameterInteraction (Russell Yanofsky)
Pull request description:
Move to AppInitServers. This doesn't have any effects on bitcoin behavior. It was just strange to have this unrelated code in the middle of parameter interaction.
Tree-SHA512: 373e18f2ef8d21999ad36295d69326128a3086044acfc8ed537abd5497c8d3620b9832f7f6aa87c0c0939bb5e0d92be8a3c006b5997e9e6fa20334f5610c89bc
c626dcb50 Make fUseCrypto atomic (MeshCollider)
731065b11 Consistent parameter names in txdb.h (MeshCollider)
35aeabec6 Make fReindex atomic to avoid race (MeshCollider)
58d91af59 Fix race for mapBlockIndex in AppInitMain (MeshCollider)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/11106
Also makes fReindex atomic as suggested in @TheBlueMatt comment below, and makes fUseCrypto atomic as suggested in 10916
d291e7635b just renames the parameters in the txdb header file to make them consistent with those used in the cpp file, noticed it when looking for uses of fReindex
Tree-SHA512: b378aa7289fd505b76565cd4d48dcdc04ac5540283ea1c80442170b0f13cb6df771b1a94dd54b7fec3478a7b4668c224ec9d795f16937782724c5d020edd3a42
f4c4e38 [trivial] Make namespace explicit for is_regular_file (John Newbery)
Pull request description:
is_regular_file resolves using argument dependent lookup. Make the
namespace explicit so it's obvious where the function is defined.
For those not familiar with argument dependent lookups:
- http://en.cppreference.com/w/cpp/language/adl
- https://en.wikipedia.org/wiki/Argument-dependent_name_lookup
Thanks to C++ guru @ryanofsky for pointing this out to me.
Tree-SHA512: 919f1818081a8f90c5751181f87e13b06d90f8aec0ab873100434e55c85cca6e0e288ecc7f135e19e9b5dba7952e96b6393864b7840e20b69dd40e92a157928b
048e0c3e2 [rpc] [tests] Add deprecated RPC test (Cristian Mircea Messel)
d4cdbd6fb [rpc] Deprecate estimatefee RPC (John Newbery)
Pull request description:
Deprecates estimatefee in v0.16, for final removal in v0.17.
This commit introduces a phased removal of RPC methods. RPC method is
disabled by default in version x, but can be enabled by using the
`-deprecatedrpc=<methodname>` argument. RPC method is removed entirely in version
(x+1).
This gives users fair warning that an RPC is to be removed, and time to change client software if necessary. Deprecation warnings in RPC return values or release notes are easily ignored.
This is a more generic version of the approach I tried to use in #10841, which too late to make it into v0.15.
Tree-SHA512: 9695a600e84b812974387333e4a6805d18972da30befb754e9e4da77cd9815d00c5cc2ee0b0350bdbbdb5fdc6ba47789f8b2c6f5b15c8cd5a1deefcc4832da30
5d2a3995e [trivial] fixup comment for VerifyWallets() (John Newbery)
43b0e81d0 [wallet] Add StartWallets() function to wallet/init.cpp (John Newbery)
290f3c56d [wallet] Add RegisterWalletRPC() function to wallet/init.cpp (John Newbery)
062d63102 [wallet] Add CloseWallets() function to wallet/init.cpp (John Newbery)
77fe07c15 [wallet] Add StopWallets() function to wallet/init.cpp (John Newbery)
2da5eafa4 [wallet] Add FlushWallets() function to wallet/init.cpp (John Newbery)
1b9cee66e [wallet] Rename WalletVerify() to VerifyWallets() (John Newbery)
9c76ba18c [wallet] Rename InitLoadWallet() to OpenWallets() (John Newbery)
Pull request description:
Apologies for the mostly code move only PR. This is a pre-req for both #10740 and #10762
All wallet component initialization/destruction functions are now in their own `wallet/init.cpp` translation unit and are no longer static functions on the CWallet class. The bitcoin_server also no longer has any knowledge that there are multiple wallets in vpwallet.
There should be no changes in behavior from this PR.
Tree-SHA512: 7c260eb094f2fa1a88d803769ba60935810968a7309f731135e4b17623b97f18c03bbcd293c942093d1efce62c6c978f9ff484d54dc9a60bc2fcb5af2d160fcd
Move some static functions out of wallet.h/cpp
This commit just moves a few function declarations and updates callers.
Function bodies are moved in two followup MOVEONLY commits.
This change is desirable because wallet.h/cpp are monolithic and hard to
navigate, so pulling things out and grouping together pieces of related
functionality should improve the organization.
Another proximate motivation is the wallet process separation work in
https://github.com/bitcoin/bitcoin/pull/10973, where (at least initially)
parameter parsing and fee estimation are still done in the main process rather
than the wallet process, and having functions that run in different processes
scrambled up throughout wallet.cpp is unnecessarily confusing.
MOVEONLY: Fee functions wallet/wallet.cpp -> wallet/fees.cpp
make it actual move only
Signed-off-by: Pasta <pasta@dashboost.org>
MOVEONLY: Init functions wallet/wallet.cpp -> wallet/init.cpp
make it actual move only
Signed-off-by: Pasta <pasta@dashboost.org>
add keepass include
Signed-off-by: Pasta <pasta@dashboost.org>
64fb0ac Declare single-argument (non-converting) constructors "explicit" (practicalswift)
Pull request description:
Declare single-argument (non-converting) constructors `explicit`.
In order to avoid unintended implicit conversions.
For a more thorough discussion, see ["C.46: By default, declare single-argument constructors explicit"](http://isocpp.github.io/CppCoreGuidelines/CppCoreGuidelines#c46-by-default-declare-single-argument-constructors-explicit) in the C++ Core Guidelines (Stroustrup & Sutter).
Tree-SHA512: e0c6922e56b11fa402621a38656d8b1122d16dd8f160e78626385373cf184ac7f26cb4c1851eca47e9b0dbd5e924e39a85c3cbdcb627a05ee3a655ecf5f7a0f1
* Don't load caches when blocks/chainstate was not present
* Delete old cache files when we decided to not load them
* Make sure cache files are of the exact format we expected them to be, flush empty objects into them instead of deleting files naively
* Streamline logic a bit, rename fIgnoreCacheFiles to fLoadCacheFiles
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Rename LLMQ_5_60 to LLMQ_TEST
* Introduce -llmqtestparams which allows to modify LLMQ_TEST on regtest
Also add support in DashTestFramework
* Use parameters size=3, threshold=2 as default for LLMQ_TEST
And fall back to the old parameters where necessary
* Wait for all contributions, even when one member is lying
Otherwise we might end up continuing too fast, which would fail the DKG.
* Update src/chainparams.cpp
Co-Authored-By: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
352d582ba Add vConnect to CConnman::Options (Marko Bencun)
Pull request description:
Split the "-connect" argument parsing out of CConnman and put it into
AppInitMain().
Tree-SHA512: f2d3efc4e2c5808ff98696ea20dd96df599bc472ed5afc9c3eea305d94c36a6ab50c632aa05396c7c34d1917d91b1e7ccd725656ff2631e2a36d9eac477455dc
40a0f9f Enable devirtualization opportunities by using the final specifier (C++11) (practicalswift)
9a1675e optim: mark a few classes final (Cory Fields)
Pull request description:
Using gcc's ```-Wsuggest-final-types``` and lto, I identified a few easy devirtualization wins:
> wallet/wallet.h:651:7: warning: Declaring type 'struct CWallet' final would enable devirtualization of 26 calls [-Wsuggest-final-types]
>coins.h:201:7: warning: Declaring type 'struct CCoinsViewCache' final would enable devirtualization of 13 calls [-Wsuggest-final-types]
>txdb.h:67:7: warning: Declaring type 'struct CCoinsViewDB' final would enable devirtualization of 5 calls [-Wsuggest-final-types]
>zmq/zmqnotificationinterface.h:16:7: warning: Declaring type 'struct CZMQNotificationInterface' final would enable devirtualization of 4 calls [-Wsuggest-final-types]
>httpserver.cpp:42:7: warning: Declaring type 'struct HTTPWorkItem' final would enable devirtualization of 2 calls [-Wsuggest-final-types]
Tree-SHA512: 2a825fd27121ccabaacff5cde2fc8a50d1b4cc846374606caa2a71b0cd8fcb0d3c9b5b3fd342d944998610e2168048601278f8a3709cc515191a0bb2d98ba782
ec6902d0e rpc: Push down safe mode checks (Andrew Chow)
Pull request description:
This contains most of the changes of #10563 "remove safe mode" by @achow101, but doesn't remove the safe mode yet, but put an `ObserveSafeMode()` check in (all 23) individual calls which used to have okSafeMode=false.
This cleans up the ugly "okSafeMode" flag from the dispatch tables, which is not a concern for the RPC server.
Extra-author: Wladimir J. van der Laan <laanwj@gmail.com>
Tree-SHA512: eee0f251fe2f38f122e7391e3c4e98d6a1e2757f3b718d6b560ad835ae94f11490865a0aef893e90b5fe298165932c8dd8298224173ac2677a5245cd532bac6e
More of 11179
more of 11179 privatesend
Signed-off-by: Pasta <pasta@dashboost.org>
cont
Signed-off-by: Pasta <pasta@dashboost.org>
fix merge from develop
Signed-off-by: Pasta <pasta@dashboost.org>
4aa2508 Bugfix: Use testnet RequireStandard for -acceptnonstdtxn default (Luke Dashjr)
Pull request description:
Fixes a bug introduced in #8855
`-acceptnonstdtxn` is a valid option only for testnet/regtest (in Core), and the help message reflects that. Currently, however, it is buggy in two ways:
1. It uses mainnet to get the default value, which doesn't make sense since the option is never available for mainnet, and the only time the option is available, is when the default is the opposite.
2. It uses the value of "require standard" directly as the default for "accept non-standard transactions", but these concepts are opposites: a negation must be performed to transform one to the other.
Note the combination of these bugs results in the correct boolean output, but the logic to get there is completely wrong.
Tree-SHA512: 06ce513f59ba31f7ab4b6422a08a17bb37a5652dea4c38a4bbefedd5e2752d17bfccc32a4b0508068fa4783e316bff00a821ef18a24b1a2bb02859995d188fdc
f4c3d2c Enable disablesafemode by default. (Gregory Maxwell)
Pull request description:
Safemode is almost useless as is-- it only triggers in limited
cases most of which aren't even concerning. There have been
several proposals to remove it. But as a simpler, safer, and
more flexible first case, simply deactivate it by default.
Anyone who wants it can re-enable and know what they've signed up for.
Tree-SHA512: f5409a3e81514c32db8eb27c7563ef85e25e56e5fc2a59eac2c30b10ec54087d982c1d3b702bedf9f3133c1f272f23805582a0f468350ba18d8b5a02bedd6401
* Sync mempool from other nodes on start
* Add `-syncmempool` cmd-line option to be able to disable mempool sync if needed
* Only sync mempool with outbound peers
Co-authored-by: Alexander Block <ablock84@gmail.com>
* Add collateral, owner and voting addresses to masternode list table
* Adjust column names in masternode list table
* Slightly refactor updateDIP3List()
* Lock cs_main in updateDIP3List early to avoid GUI frezes
* Update MN list in GUI 10 times less often while blockchain is still syncing
* Move GetUTXO calls outside of main update loop
* Fill coin cache for masternode UTXOs on start
* Detect masternode mode from privkey arg
The `masternode` argument seems redundant. This change enables masternode mode
based on the presence (and validity) of the `masternodeblsprivkey` argument.
* Deprecate -masternode option
* Remove -masternode switch from functional tests
* Move -masternode deprecate warning to better place
* It should not be possible to change settings for additional indexes without reindex
* Should write db flags for additional indexes on reindex
* Add tests to make sure index settings can't be changed without reindex
6262915 Add unit test for stale tip checking (Suhas Daftuar)
83df257 Add CConnmanTest to mutate g_connman in tests (João Barbosa)
ac7b37c Connect to an extra outbound peer if our tip is stale (Suhas Daftuar)
db32a65 Track tip update time and last new block announcement from each peer (Suhas Daftuar)
2d4327d net: Allow connecting to extra outbound peers (Suhas Daftuar)
Pull request description:
This is an alternative approach to #11534. Rather than disconnect an outbound peer when our tip looks stale, instead try to connect to an additional outbound peer.
Periodically, check to see if we have more outbound peers than we target (ie if any extra peers are in use), and if so, disconnect the one that least recently announced a new block (breaking ties by choosing the newest peer that we connected to).
Tree-SHA512: 8f19e910e0bb36867f81783e020af225f356451899adfc7ade1895d6d3bd5afe51c83759610dfd10c62090c4fe404efa0283b2f63fde0bd7da898a1aaa7fb281
77939f27f Fix uninitialized g_connman crash in Shutdown() (MeshCollider)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/11312
As @dooglus pointed out, `g_connman` is uninitialized when an invalid wallet path is passed on start up, but then dereferenced in `Shutdown()`, so this tiny PR just fixes that.
Tree-SHA512: 2557133422a6e393017081450a7e6c100fe7d9ce36e628e5f5f479bc07617a7bd9a9ad4d44c0d8abadf2e3eb62a11ce9743abc27b4ae8c20f709e72df4f25a7f
2525b972a net: stop both net/net_processing before destroying them (Cory Fields)
80e2e9d0c net: drop unused connman param (Cory Fields)
8ad663c1f net: use an interface class rather than signals for message processing (Cory Fields)
28f11e940 net: pass CConnman via pointer rather than reference (Cory Fields)
Pull request description:
See individual commits.
Benefits:
- Allows us to begin moving stuff out of CNode and into CNodeState (after #10652 and follow-ups)
- Drops boost dependency and overhead
- Drops global signal registration
- Friendlier backtraces
Tree-SHA512: af2038c959dbec25f0c90c74c88dc6a630e6b9e984adf52aceadd6954aa463b6aadfccf979c2459a9f3354326b5077ee02048128eda2a649236fadb595b66ee3
15f5d3b17 Switch DNSSeed-needed metric to any-automatic-nodes, not services (Matt Corallo)
5ee88b4bd Clarify docs for requirements/handling of addnode/connect nodes (Matt Corallo)
57edc0b0c Rename fAddnode to a more-descriptive "manual_connection" (Matt Corallo)
44407100f Replace relevant services logic with a function suite. (Matt Corallo)
Pull request description:
This was mostly written as a way to clean things up so that the NETWORK_LIMITED PR (#10387) can be simplified a ton, but its also a nice standalone cleanup that will also require a bit of review because it tweaks a lot of stuff across net. The new functions are fine in protocol.h right now since they're straight-forward, but after NETWORK_LIMITED will really want to move elsewhere after @theuni moves the nServices-based selection to addrman from connman.
Adds HasAllRelevantServices and GetRelevantServices, which check
for NETWORK|WITNESS.
This changes the following:
* Removes nRelevantServices from CConnman, disconnecting it a bit
more from protocol-level logic.
* Replaces our sometimes-connect-to-!WITNESS-nodes logic with
simply always requiring WITNESS|NETWORK for outbound non-feeler
connections (feelers still only require NETWORK).
* This has the added benefit of removing nServicesExpected from
CNode - instead letting net_processing's VERSION message
handling simply check HasAllRelevantServices.
* This implies we believe WITNESS nodes to continue to be a
significant majority of nodes on the network, but also because
we cannot sync properly from !WITNESS nodes, it is strange to
continue using our valuable outbound slots on them.
* In order to prevent this change from preventing connection to
-connect= nodes which have !WITNESS, -connect nodes are now
given the "addnode" flag. This also allows outbound connections
to !NODE_NETWORK nodes for -connect nodes (which was already true
of addnodes).
* Has the (somewhat unintended) consequence of changing one of the
eviction metrics from the same
sometimes-connect-to-!WITNESS-nodes metric to requiring
HasRelevantServices.
This should make NODE_NETWORK_LIMITED much simpler to implement.
Tree-SHA512: 90606896c86cc5da14c77843b16674a6a012065e7b583d76d1c47a18215358abefcbab44ff4fab3fadcd39aa9a42d4740c6dc8874a58033bdfc8ad3fb5c649fc
eac64bb7a [qa] Test nMinimumChainWork (Suhas Daftuar)
0311836f6 Allow setting nMinimumChainWork on command line (Suhas Daftuar)
Pull request description:
As discussed briefly here: https://botbot.me/freenode/bitcoin-core-dev/2017-02-28/?msg=81712308&page=4
This adds a hidden command line option for setting `nMinimumChainWork`, which allows us to test this parameter in our functional tests, as well as allowing for niche use cases like syncing nodes that are otherwise disconnected from the network.
See also #10345, which proposes a new use of `nMinimumChainWork`.
Tree-SHA512: fe4d8f4f289697615c98d8760f1cc74c076110310ea0b5b875fcab78c127da9195b4eb84148aebacc7606c246e5773d3f13bd5d9559d0a8bffac20a3a28c62df
cd0ea4874 Changing -txindex requires -reindex, not -reindex-chainstate (Matt Corallo)
Pull request description:
If there's an 0.15.0rc3, this should go in it.
Tree-SHA512: 857e77f0af9c055a3d1d91f37474ee9e06d6bc8c5ed21b29201b6c386801e7041523949076cdf0daa4d357a5175ce49394d85a1bedfbf13f3e577bdb6da1d6ce
e7539f8 Fix some broken init-time prints/constants (Matt Corallo)
13ab353 Check for empty coinsview instead of just-reset coinsview in init (Matt Corallo)
fce3f4f Fix resume-of-reindex-after-restart (Matt Corallo)
efac91e Always wait for threadGroup to exit in bitcoind shutdown (Matt Corallo)
Pull request description:
This is a follow-on to #10758 to help move 10758 along. The first fixes a regression in master that was partially fixed in 10758, the second I'm not sure if its a regression or not, but its clearly a bug that should be fixed.
Tree-SHA512: aca7b97a97dca66e1a218a33cc6f4aa002292ff1bb0af64e35b81fbaa91b9504f2605375808b43e93a63fc73634ad079b30ef6c9f4ba338d3b5f72d816dfeaff
c0025d0 Fix segfault when shutting down before fully loading (Matt Corallo)
1385697 Order chainstate init more logically. (Matt Corallo)
ff3a219 Call RewindBlockIndex even if we're about to run -reindex-chainstate (Matt Corallo)
b0f3249 More user-friendly error message if UTXO DB runs ahead of block DB (Matt Corallo)
eda888e Fix some LoadChainTip-related init-order bugs. (Matt Corallo)
Pull request description:
This does a number of things to clean up chainstate init order,
fixing some issues as it goes:
* Order chainstate init more logically - first all of the
blocktree-related loading, then coinsdb, then
pcoinsTip/chainActive. Only create objects as needed.
* More clearly document exactly what is and isn't called in
-reindex and -reindex-chainstate both with comments noting
calls as no-ops and by adding if guards.
* Move the writing of fTxIndex to LoadBlockIndex - this fixes a
bug introduced in d6af06d68a where
InitBlockIndex was writing to fTxIndex which had not yet been
checked (because LoadChainTip hadn't yet initialized the
chainActive, which would otherwise have resulted in
InitBlockIndex being a NOP), allowing you to modify -txindex
without reindex, potentially corrupting your chainstate!
* Rename InitBlockIndex to LoadGenesisBlock, which is now a more
natural name for it. Also check mapBlockIndex instead of
chainActive, fixing a bug where we'd write the genesis block out
on every start.
* Move LoadGenesisBlock further down in init. This is a more logical
location for it, as it is after all of the blockindex-related
loading and checking, but before any of the UTXO-related loading
and checking.
* Give LoadChainTip a return value - allowing it to indicate that
the UTXO DB ran ahead of the block DB. This just provides a nicer
error message instead of the previous mysterious
assert(!setBlockIndexCandidates.empty()) error.
* Calls ActivateBestChain in case we just loaded the genesis
block in LoadChainTip, avoiding relying on the ActivateBestChain
in ThreadImport before continuing init process.
* Move all of the VerifyDB()-related stuff into a -reindex +
-reindex-chainstate if guard. It couldn't do anything useful
as chainActive.Tip() would be null at this point anyway.
Tree-SHA512: 3c96ee7ed44f4130bee3479a40c5cd99a619fda5e309c26d60b54feab9f6ec60fabab8cf47a049c9cf15e88999b2edb7f16cbe6819e97273560b201a89d90762
* remove liquidity provider. The reason behind this is two fold:
1. it is very likely nobody is currently running this on the mainnet (due to already strong liquidity), it provides no use for testnet as there you can just enable mixing and get the same affect. Because of this reason I don't find it okay to just remove it outright.
2. even if people did use it (or if some do as a novelty) it likely hurts the privacy of the system. This is because as a liquidity provider your outputs will always take many (sometimes hundreds) blocks before being used in a new mixing round, whereas real user's funds will normally be mixed again very rapidly.
Signed-off-by: Pasta <pasta@dashboost.org>
* remove unused function
Signed-off-by: Pasta <pasta@dashboost.org>
* clarify comment regarding default peer connections and how that applies to MNs
Signed-off-by: Pasta <pasta@dashboost.org>
* clarify debug log when maxconnections is force set
Signed-off-by: Pasta <pasta@dashboost.org>
f4d00e6 Add a discard_rate (Alex Morcos)
b138585 Remove factor of 3 from definition of dust. (Alex Morcos)
Pull request description:
The definition of dust is redefined to remove the factor of 3.
Dust is redefined to be the value of an output such that it would
cost that value in fees to (create and) spend the output at the dust
relay rate. The previous definition was that it would cost 1/3 of the
value. The default dust relay rate is correspondingly increased to
3000 sat/kB so the actual default dust output value of 546 satoshis
for a non-segwit output remains unchanged. This commit is a refactor
only unless a dustrelayfee is passed on the commandline in which case
that number now needs to be increased by a factor of 3 to get the same
behavior. -dustrelayfee is a hidden command line option.
Note: It's not exactly a refactor due to edge case changes in rounding
as evidenced by the required change to the unit test.
A discard_rate is added which defaults to 10,000 sat/kB
Any change output which would be dust at the discard_rate you are
willing to discard completely and add to fee (as well as continuing to
pay the fee that would have been needed for creating the change)
This would be a nice addition for 0.15 and I think will remain useful for 0.16 with the new coin selection algorithms in discussion, but its not crucial.
It does add translation strings, but we could (should?) avoid that by hiding the option
Tree-SHA512: 5b6f655354d0ab6b8b6cac1e8d1fe3136d10beb15c6d948fb15bfb105155a9d03684c6240624039b3eed6428b7e60e54216cc8b2f90c4600701e39f646284a9b
Signed-off-by: Pasta <pasta@dashboost.org>
1f668b6 Expose if CScheduler is being serviced, assert its not in EmptyQueue (Matt Corallo)
3192975 Flush CValidationInterface callbacks prior to destruction (Matt Corallo)
08096bb Support more than one CScheduler thread for serial clients (Matt Corallo)
2fbf2db Add default arg to CScheduler to schedule() a callback now (Matt Corallo)
cda1429 Give CMainSignals a reference to the global scheduler (Matt Corallo)
3a19fed Make ValidationInterface signals-type-agnostic (Matt Corallo)
ff6a834 Use TestingSetup to DRY qt rpcnestedtests (Matt Corallo)
Tree-SHA512: fab91e34e30b080ed4d0a6d8c1214910e383c45440676e37be61d0bde6ae98d61e8903d22b846e95ba4e73a6ce788798350266feba246d8a2ab357e8523e4ac5
176c021 [qa] Test non-atomic chainstate writes (Suhas Daftuar)
d6af06d Dont create pcoinsTip until after ReplayBlocks. (Matt Corallo)
eaca1b7 Random db flush crash simulator (Pieter Wuille)
0580ee0 Adapt memory usage estimation for flushing (Pieter Wuille)
013a56a Non-atomic flushing using the blockchain as replay journal (Pieter Wuille)
b3a279c [MOVEONLY] Move LastCommonAncestor to chain (Pieter Wuille)
Tree-SHA512: 47ccc62303f9075c44d2a914be75bd6969ff881a857a2ff1227f05ec7def6f4c71c46680c5a28cb150c814999526797dc05cf2701fde1369c06169f46eccddee
dba485d init: Factor out AppInitLockDataDirectory (Wladimir J. van der Laan)
Pull request description:
Alternative to #10818, alternative solution to #10815.
After this change: All the AppInit steps before and inclusive AppInitLockDataDirectory must not have Shutdown() called in case of failure. Only when AppInitMain fails, Shutdown should be called.
Changes the GUI and bitcoind code to consistently do this.
Tree-SHA512: 393e1a0ae05eb8e791025069e3ac4f6f3cdeb459ec63feda85d01cf6696ab3fed7632b6a0ac3641b8c7015af51d46756b5bba77f5e5f0c446f0c2dea58bbc92e
38bc1ec Make more json-like output from estimaterawfee (Alex Morcos)
2d2e170 Comments and improved documentation (Alex Morcos)
ef589f8 minor cleanup: remove unnecessary variable (Alex Morcos)
3ee76d6 Introduce a scale factor (Alex Morcos)
5f1f0c6 Historical block span (Alex Morcos)
aa19b8e Clean up fee estimate debug printing (Alex Morcos)
10f7cbd Track first recorded height (Alex Morcos)
3810e97 Rewrite estimateSmartFee (Alex Morcos)
c7447ec Track failures in fee estimation. (Alex Morcos)
4186d3f Expose estimaterawfee (Alex Morcos)
2681153 minor refactor: explicitly track start of new bucket range and don't update curNearBucket on final loop. (Alex Morcos)
1ba43cc Make EstimateMedianVal smarter about small failures. (Alex Morcos)
d3e30bc Refactor to update moving average on fly (Alex Morcos)
e5007ba Change parameters for fee estimation and estimates on all 3 time horizons. (Alex Morcos)
c0a273f Change file format for fee estimates. (Alex Morcos)
Tree-SHA512: 186e7508d86a1f351bb656edcd84ee9091f5f2706331eda9ee29da9c8eb5bf67b8c1f2abf6662835560e7f613b1377099054f20767f41ddcdbc89c4f9e78946d
6b8d872 Protect SSE4 code behind a compile-time flag (Pieter Wuille)
fa9be90 Add selftest for SHA256 transform (Pieter Wuille)
c1ccb15 Add SSE4 based SHA256 (Pieter Wuille)
2991c91 Add SHA256 dispatcher (Pieter Wuille)
4d50f38 Support multi-block SHA256 transforms (Pieter Wuille)
Pull request description:
This adds an SSE4 assembly version of the SHA256 transform by Intel, and uses it at run time if SSE4 instructions are available, and use a fallback C++ implementation otherwise. Nearly every x86_64 CPU supports SSE4. The feature is only enabled when compiled with `--enable-experimental-asm`.
In order to avoid build dependencies and other complications, the original Intel YASM code was translated to GCC extended asm syntax.
This gives around a 50% speedup on the SHA256 benchmark for me.
It is based on an earlier patch by @laanwj, though only includes a single assembly version (for now), and removes the YASM dependency.
Tree-SHA512: d31c50695ceb45264291537b93c0d7497670be38edf021ca5402eaa7d4e1e0e1ae492326e28d4e93979d066168129e62d1825e0384b1b906d36f85d93dfcb43c
959dd8781 Avoid printing incorrect block indexing time due to uninitialized variable (practicalswift)
Tree-SHA512: a76e43c3ffa734ed5c7eadf363f345f268aa0e6ce775aba8f856fe3bbc82f240dc7c734c5ca3ac500a12eb41fae00623413e79f484d5acf809b6e400851d771d
5a9b508 [trivial] Add end of namespace comments (practicalswift)
Tree-SHA512: 92b0fcae4d1d3f4da9e97569ae84ef2d6e09625a5815cd0e5f0eb6dd2ecba9852fa85c184c5ae9de5117050330ce995e9867b451fa8cd5512169025990541a2b
* Merge #8694: Basic multiwallet support
c237bd7 wallet: Update formatting (Luke Dashjr)
9cbe8c8 wallet: Forbid -salvagewallet, -zapwallettxes, and -upgradewallet with multiple wallets (Luke Dashjr)
a2a5f3f wallet: Base backup filenames on original wallet filename (Luke Dashjr)
b823a4c wallet: Include actual backup filename in recovery warning message (Luke Dashjr)
84dcb45 Bugfix: wallet: Fix warningStr, errorStr argument order (Luke Dashjr)
008c360 Wallet: Move multiwallet sanity checks to CWallet::Verify, and do other checks on all wallets (Luke Dashjr)
0f08575 Wallet: Support loading multiple wallets if -wallet used more than once (Luke Dashjr)
b124cf0 Wallet: Replace pwalletMain with a vector of wallet pointers (Luke Dashjr)
19b3648 CWalletDB: Store the update counter per wallet (Luke Dashjr)
74e8738 Bugfix: ForceSetArg should replace entr(ies) in mapMultiArgs, not append (Luke Dashjr)
23fb9ad wallet: Move nAccountingEntryNumber from static/global to CWallet (Luke Dashjr)
9d15d55 Bugfix: wallet: Increment "update counter" when modifying account stuff (Luke Dashjr)
f28eb80 Bugfix: wallet: Increment "update counter" only after actually making the applicable db changes to avoid potential races (Luke Dashjr)
Tree-SHA512: 23f5dda58477307bc07997010740f1dc729164cdddefd2f9a2c9c7a877111eb1516d3e2ad4f9b104621f0b7f17369c69fcef13d28b85cb6c01d35f09a8845f23
* pwalletMain -> vpwallets
Signed-off-by: Pasta <pasta@dashboost.org>
* add gArgs
Signed-off-by: Pasta <pasta@dashboost.org>
* continued pwalletsMain -> vpwallets
Signed-off-by: Pasta <pasta@dashboost.org>
* remove external pwalletMains and pwalletMain -> vpwallet
Signed-off-by: Pasta <pasta@dashboost.org>
* add external referance to vpwallets
Signed-off-by: Pasta <pasta@dashboost.org>
* more pWalletMain -> vpwallets[0]
Signed-off-by: Pasta <pasta@dashboost.org>
* code review
Signed-off-by: Pasta <pasta@dashboost.org>
* revert LOCK(cs_main) move
Signed-off-by: Pasta <pasta@dashboost.org>
* import wallet.h and remove extern
Signed-off-by: Pasta <pasta@dashboost.org>
* batch.* -> WriteIC and EraseIC
Signed-off-by: Pasta <pasta@dashboost.org>
* wrap wallet.h include inside of an ifdef
Signed-off-by: Pasta <pasta@dashboost.org>
* drop wallet.h
Signed-off-by: Pasta <pasta@dashboost.org>
* add dropped "!"
Signed-off-by: Pasta <pasta@dashboost.org>
cb24c85 Use rdrand as entropy source on supported platforms (Pieter Wuille)
Tree-SHA512: c42eaa01a14e6bc097c70b6bf8540d61854c2f76cb32be69c2a3c411a126f7b4bf4a4486e4493c4cc367cc689319abde0d4adb799d29a54fd3e81767ce0766fc
* Remove ppszTypeName from protocol.cpp and reimplement GetCommand
This removes the need to carefully maintain ppszTypeName, which required
correct order and also did not allow to permanently remove old message
types.
To get the command name for an INV type, GetCommandInternal uses a switch
which needs to be maintained from now on.
The way this is implemented also resembles the way it is implemented in
Bitcoin today, but it's not identical. The original PR that introduced the
switch case in Bitcoin was part of the Segwit changes and thus never got
backported. I decided to implement it in a slightly different way that
avoids throwing exceptions when an unknown INV type is encountered.
IsKnownType will now also leverage GetCommandInternal() to figure out if
the INV type is known locally. This has the side effect of old/legacy
message types to return false from now on. We will depend on this side
effect in later commits when we remove legacy InstantSend code.
* Stop handling/relaying legacy IX messages
When we receive an IX message, we simply treat it as a regular TX and relay
it as such.
We'll however still request IX messages when they are announced to us. We
can't simply revert to requesting TX messages in this case as it might
result in the other peer not answering due to the TX not being in mapRelay
yet. We should at some point in the future completely drop handling of IX
messages instead.
* Remove IsNewInstantSendEnabled() and only use IsInstantSendEnabled()
* Remove legacy InstantSend from GUI
* Remove InstantSend from Bitcoin/Dash URIs
* Remove legacy InstantSend from RPC commands
* Remove legacy InstantSend from wallet
* Remove legacy instantsend.h include
* Remove legacy InstantSend from validation code
* Completely remove remaining legacy InstantSend code
* Remove now unused spork
* Fix InstantSend related test failures
* Remove now obsolete auto IS tests
* Make spork2 and spork3 disabled by default
This should have no influence on mainnet as these sporks are actually set
there. This will however affect regtest, which shouldn't have LLMQ based
InstantSend enabled by default.
* Remove instantsend tests from dip3-deterministicmns.py
These were only testing legacy InstantSend
* Fix .QCheckBox#checkUsePrivateSend styling a bit
* s/TXLEGACYLOCKREQUEST/LEGACYTXLOCKREQUEST/
* Revert "verified via InstantSend" back to "verified via LLMQ based InstantSend"
* Use cmd == nullptr instead of !cmd
* Remove last parameter from AvailableCoins call
This was for fUseInstantSend which is not present anymore since rebase
* Implement CompactFull() in CDBWrapper
This allows to compact the whole DB in one go.
* Implement more compact version of CDeterministicMNListDiff
This introduces CDeterministicMNStateDiff which requires to only store
fields on-disk which actually changed.
* Avoid writing mnUniquePropertyMap to disk when storing snapshots
This map can be rebuilt by simply using AddMN for each deserialized MN.
* Implement Serialize/Unserialize in CScript
This allows us to directly use READWRITE() on scripts and removes the need
for the ugly cast to CScriptBase. This commit also changes all Dash specific
uses of CScript to not use the cast.
* Keep track of registeration counts and introduce internalID for masternodes
The "internalId" is simply the number of MNs registered so far when the
new MN is added. It is deterministic and stays the same forever.
* Use internalId as keys in MN list diffs
This reduces the used size on-disk.
* Two simple speedups in MN list diff handling
1. Avoid full compare if dmn or state pointers match in BuildDiff
2. Use std::move when adding diff to listDiff in GetListForBlock
* Implement upgrade code for old CDeterministicMNListDiff format to new format
* Track tipIndex instead of tipHeight/tipBlockHash
* Store and pass around CBlockIndex* instead of block hash and height
This allows us to switch CDeterministicMNManager::GetListForBlock to work
with CBlockIndex.
* Refactor CDeterministicMNManager::GetListForBlock to require CBlockIndex*
Instead of requiring a block hash. This allows us to remove blockHash and
prevBlockHash from CDeterministicMNListDiff without the use of cs_main
locks in GetListForBlock.
* Remove prevBlockHash, blockHash and nHeight from CDeterministicMNListDiff
* Remove access to determinisitcMNManager in CMasternodeMetaMan::ToString()
The deterministic MN manager is not fully initialized yet at the time this
is called, which results in an empty list being returned everytime.
* Better logic to determine if an upgrade is needed
Reuse the "best block" logic to figure out if an upgrade is needed. Also
use it to ensure that older nodes are unable to start after the upgrade
was performed.
* Return null block hash if it was requested with getmnlistdiff
* bump CGovernanceManager::SERIALIZATION_VERSION_STRING
* Check SERIALIZATION_VERSION_STRING before deserializing anything else
* Invoke Clear() before deserializing just to be sure
* Decouple lite mode and client-side PrivateSend
`-enableprivatesend`:
1. off by default in lite mode but can be overridden
2. does not start mixing, use `-privatesendautostart` (default is off) or `privatesend` rpc instead
* Disable PS when there is no wallet, do not auto-start mixing when wallet is locked
* Check for `!fEnablePrivateSend` and `!fPrivateSendRunning` instead of `!pwalletMain` in ps client code
* Add meaningful `privatesend` rpc error messages for various cases when mmixing is disabled
381a46e Consensus: Policy: MOVEONLY: Move CFeeRate out of the consensus module (Jorge Timón)
330bb5a Consensus: Minimal way to move dust out of consensus (Jorge Timón)
Tree-SHA512: 19a2ea8169afd5a9d3f940d8974e34cfaead153e3ff3068ac82fccdb8694d19d9b45938904ec9e8cd095bd5ca3a0080364da29372f6aaf56b11a6c2ccd6c7a4d
c1082a7 Chainparams: Use the factory for pow tests (Jorge Timón)
2351a06 Chainparams: Get rid of CChainParams& Params(std::string) (Jorge Timón)
f87f362 Chainparams: Use a regular factory for creating chainparams (Jorge Timón)
Tree-SHA512: 359c8a2a1bc9d02db7856d02810240ada28048ac088f878b575597a7255cdb0ffdd1a647085ee67a34c6a7e7ed9e6cfdb61240cf6e75139619b640dbb096072c
07c4838 Always return true if AppInitMain got to the end (Matt Corallo)
Pull request description:
This should fix a rare zapwallettxes failure on travis, but also
avoids having init operations (re-adding wallet transactions to
mempool) running after RPC is free'd.
I believe this was the failure at https://travis-ci.org/bitcoin/bitcoin/jobs/311747844 (from #11605).
Tree-SHA512: f0fea8c1b9265e2eeda57043d541380a3e58e4d9388fa24628a52fd56324257fcd7df0ca02e8f77f66fadd68d951893bab0f610ed9fd0a89b2ccd6bad1efa351
78da882 Util: Small improvements in gArgs usage (Jorge Timón)
5292245 Util: Put mapMultiArgs inside ArgsManager (Jorge Timón)
b3cbd55 scripted-diff: Util: Encapsulate mapMultiArgs behind gArgs (Jorge Timón)
f2957ce Util: Create ArgsManager class... (Jorge Timón)
Tree-SHA512: 7d58250da440ad0f41745f46ab6021d6ecbb292035cab3d86fb08ce6bd822df604ac31b3ded6fd6914f7cfd12ba531cbc06a76eb500f629627f47ae6ac8350a7
add ForceRemoveArg and ForceSetMultiArg to ArgsManager class
Signed-off-by: Pasta <pasta@dashboost.org>
add static inlines for ForceSetMultiArgs and ForceRemoveArg
Signed-off-by: Pasta <pasta@dashboost.org>
both void
Signed-off-by: Pasta <pasta@dashboost.org>
use gArgs, dash code
Signed-off-by: Pasta <pasta@dashboost.org>
revert a bit
Signed-off-by: Pasta <pasta@dashboost.org>
adj
Signed-off-by: Pasta <pasta@dashboost.org>
use gArgs
Signed-off-by: Pasta <pasta@dashboost.org>
remove '_'
Signed-off-by: Pasta <pasta@dashboost.org>
a750d77 Add tests for mempool persistence (John Newbery)
91c91e1 Control mempool persistence using a command line parameter. (John Newbery)
Tree-SHA512: 157d01cefd1903b8bfc5cbab42a3cc5e9c1094179bf4b64b3d34c0d4d9b976d593755bfea5c41c631cb758e1de17c6c2058c130d487d20560b7c0bafcddfa520
68af651 MOVEONLY: move TxConfirmStats to cpp (Alex Morcos)
2332f19 Initialize TxConfirmStats in constructor (Alex Morcos)
5ba81e5 Read and Write fee estimate file directly from CBlockPolicyEstimator (Alex Morcos)
14e10aa Call estimate(Smart)Fee directly from CBlockPolicyEstimator (Alex Morcos)
dbb9e36 Give CBlockPolicyEstimator it's own lock (Alex Morcos)
f6187d6 Make processBlockTx private. (Alex Morcos)
ae7327b Make feeEstimator its own global instance of CBlockPolicyEstimator (Alex Morcos)
Tree-SHA512: dbf3bd2b30822e609a35f3da519b62d23f8a50e564750695ddebd08553b4c01874ae3e07d792c6cc78cc377d2db33b951ffedc46ac7edaf5793f9ebb931713af
finish #9942 by removing removed functions
Signed-off-by: Pasta <Pasta@dash.org>
f110272 Remove `namespace fs=fs` (Wladimir J. van der Laan)
75594bd torcontrol: Use fs::path instead of std::string for private key path (Wladimir J. van der Laan)
2a5f574 Use fsbridge for fopen and freopen (Wladimir J. van der Laan)
bac5c9c Replace uses of boost::filesystem with fs (Wladimir J. van der Laan)
7d5172d Replace includes of boost/filesystem.h with fs.h (Wladimir J. van der Laan)
19e36bb Add fs.cpp/h (Wladimir J. van der Laan)
Tree-SHA512: 2c34f059dfa6850b9323f3389e9090a6b5f839a457a2960d182c2ecfafd9883c956f5928bb796613402d3aad68ebc78259796a7a313f4a6cfa98aaf507a66842
* Contains dashification. disables `-debug dash`
Merge #9424: Change LogAcceptCategory to use uint32_t rather than sets of strings.
6b3bb3d Change LogAcceptCategory to use uint32_t rather than sets of strings. (Gregory Maxwell)
Tree-SHA512: ebb5bcf9a7d00a32dd1390b727ff4d29330a038423611da01268d8e1d2c0229e52a1098e751d4e6db73ef4ae862e1e96d38249883fcaf12b68f55ebb01035b34
Signed-off-by: Pasta <Pasta@dash.org>
31 -> 32
Signed-off-by: Pasta <Pasta@dash.org>
* Merge #10123: Allow debug logs to be excluded from specified component
3bde556 Add -debugexclude option to switch off logging for specified components (John Newbery)
Tree-SHA512: 30202e3f2085fc2fc5dd4bedb92988f4cb162c612a42cf8f6395a7da326f34975ddc347f82bc4ddca6c84c438dc0cc6e87869f90c7ff88105dbeaa52a947fa43
* bump to uint64_t due to added Dash codes
Signed-off-by: Pasta <Pasta@dash.org>
* bump to uint64_t due to added Dash codes cont.
Signed-off-by: Pasta <Pasta@dash.org>
* string -> BCLog format
Signed-off-by: Pasta <Pasta@dash.org>
* uint32_t -> uint64_t
Signed-off-by: Pasta <Pasta@dash.org>
* Fix CBatchedLogger
* Fix most fDebug-s
* Fix `debug` rpc
* Fix BENCH and RAND conflicts
* Add ALERT and use it
* Update LogPrint-s in dash-specific code
* Tweak few log categories
Specifically:
- use PRIVATESEND in `CPrivateSendClientManager::GetRandomNotUsedMasternode()`
- use ZMQ in `CZMQPublishRawGovernanceVoteNotifier::NotifyGovernanceVote()` and `CZMQPublishRawGovernanceObjectNotifier::NotifyGovernanceObject()`
* Drop no longer used MASTERNODE category
* Merge #10153: logging: Fix off-by-one for shrinkdebugfile default
faab624 logging: Fix off-by-one for shrinkdebugfile (MarcoFalke)
Tree-SHA512: d6153e06067906172ff0611af9e585a3ecf0a7d56925b6ad7c12e75aa802441047059b9b6f6c78e79916c3f2abc8f1998bfd2d5b84201ec6421f727c08da3c21
* Shift dash-specific log categories to start from `1ul << 32` to avoid potential future conflicts with bitcoin ones
* Fix `dash` category
* remove debugCategories
Signed-off-by: Pasta <Pasta@dash.org>
* Prepend "std::" to find call
* Check for BCLog::PRIVATESEND instead of logCategories != BCLog::NONE
* Use BCLog::MNPAYMENTS category instead of checking for logCategories != BCLog::NONE
* Move "End Dash" comment below "ALERT"
When adding new entries here, we'll otherwise get confused with ordering
and might end up forgetting that adding something Dash specific must
continue with the bit after 43.
0fb2887 Move several relay options into the Relay help group (Jameson Lopp)
Tree-SHA512: 31fdfd8c741adb6fe6806a28955f0fbbc9360b1d8c3d8a28684794822f1b3231fffab93357357d986b81a4532c9eeabb79e5ede9378ff3ad8930ceb6588d9eb6
* rename instantx.* file to instantsend.*
* Reorganize Dash Specific code into folders
add to privatesend folder the header files
Signed-off-by: Pasta <Pasta@dash.org>
add "masternode" to imports
Signed-off-by: Pasta <Pasta@dash.org>
add "masternode" to imports
Signed-off-by: Pasta <Pasta@dash.org>
add "masternode" to imports pt 2
Signed-off-by: Pasta <Pasta@dash.org>
f885b67 refactor: Make rest.cpp dependency on `*toJSON` in `blockchain.cpp` explicit (Wladimir J. van der Laan)
8d8f28d refactor: Move RPCNotifyBlockChange out of `rpc/server.h` (Wladimir J. van der Laan)
e6dcfee refactor: Move GetDifficulty out of `rpc/server.h` (Wladimir J. van der Laan)
Tree-SHA512: fc2656611d18442f2fddba5ac1554d958151f6785c2039afdfc36735d7e71592d9686ff6cc7b2ad95180071d7514470e62c52d697c5a1e88f851bddaf5942edb
* Be more accurate with denom creation/consumption
- Calculate and pass an actual balance needed to be denominated to CreateDenominated.
- Drop GetNeedsToBeAnonymizedBalance and fix corresponding conditions: do not overshoot, do not check max pool amount - these conditions are handled outside.
- Properly calculate various balance limits.
- Handle edge case for the final denom.
* Add an option to control max number of denoms created and respect it
`-privatesenddenoms`, default is 300
Note: CreateDenominated failure is not an error anymore
* Add few more stats to log in DoAutomaticDenominating
* Trivial: vout->txout
* Re-use SetHexStr in few more places
* Tweak log output
* fix v13 release notes links
* Drop no longer used stuff
* Few more trivial fixes
* Adjust few rpc help strings
* Apply review suggestions
* Harden DIP3 activation height
Also drop all related but no longer used parts.
* Pass current block index to GetCommitmentsFromBlock
* Allow to change dip3 activation height for tests
And fix them.
* Prepare Dash-related stuff before starting ThreadImport
* Ensure activeMasternodeManager is not null in ThreadImport when DIP3 is active and we are running in masternode mode
* Implement copy_datadir to allow easy copying of state from one node to another
* Instead of starting with a fresh datadir for MNs, reuse a copy of the faucet
* Start masternodes in parallel instead of waiting for the previous to finish
* Allow specifying of window and threshold with -bip9params
* Implement -dip3activationheight for regtests
* Implement fast DIP3 activation in DashTestFramework
* Speed up activation of DIP3 in dip3-deterministicmns.py
* Update qa/rpc-tests/test_framework/test_framework.py
Co-Authored-By: codablock <ablock84@gmail.com>
* Always assign fast_dip3_activation
7e6dcd9 random: Add fallback if getrandom syscall not available (Wladimir J. van der Laan)
7cad849 sanity: Move OS random to sanity check function (Wladimir J. van der Laan)
aa09ccb squashme: comment that NUM_OS_RANDOM_BYTES should not be changed lightly (Wladimir J. van der Laan)
224e6eb util: Specific GetOSRandom for Linux/FreeBSD/OpenBSD (Wladimir J. van der Laan)
Tree-SHA512: 9fd408b1316c69de86674f342339b2f89192fd317c8c036b5df4320f828fa263c7966146bfc1904c51137ee4a26e4cb0f560b2cd05e18cde4d808b9b92ad15c4
* No need to translate "Dash"
* Fix missing dashification
* Update docs
* Fix cmd-line params help
- `bool` should have no `=<smth>`
- non-`bool` should have proper `<smth>`
* Fix `quorum dkgstatus` help
* add llmq/ into files.md
