* Make internalId private to make sure it's set/accessed properly
* evo: Make internalId only accessible by the constructor
* Tweak constructors
Co-authored-by: xdustinface <xdustinfacex@gmail.com>
* Return invalid state for GetTxPayload failures instead of asserting
* Throw an error when internal `find` fails instead of asserting
* Unify mnlist checks for lists created from blocks and lists created via updates of older lists with diffs
* Wrap evo block processing in try..catch to make sure all earlier introduced throws are caught
* evo/llmq: Adjust reject reasons for CFinalCommitmentTxPayload
In CheckLLMQCommitment this reject string was used so i adjusted the
other one in CQuorumBlockProcessor::GetCommitmentsFromBlock and the new
introduced in PR #3506
* return state.DoS instead of asserting in cbtx.cpp
Signed-off-by: pasta <pasta@dashboost.org>
Co-authored-by: xdustinface <xdustinfacex@gmail.com>
Co-authored-by: pasta <pasta@dashboost.org>
Deleting these from the DB means that future calls to GetListForBlock for
the reorged/orphaned block will return an empty MN list. At the same time,
GetListForBlock will add the empty list to the internal MN list cache.
This behavior is not acceptable for multiple reasons:
1. A caller of GetListForBlock should always expect a valid list if that
block was once in the best chain. We might otherwise run into strange
behavior (e.g. GetAllQuorumMembers returning zero members)
2. If the chain is ever reorged back to the initial chain (that was
orphaned), GetListForBlock should not return the invalid/empty cache
entry for the previously orphaned block.
This should also fix test failures seen on Gitlab CI
* scripted-diff: Replace #include "" with #include <> (ryanofsky)
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* scripted-diff: Replace #include "" with #include <> (Dash Specific)
-BEGIN VERIFY SCRIPT-
for f in \
src/bls/*.cpp \
src/bls/*.h \
src/evo/*.cpp \
src/evo/*.h \
src/governance/*.cpp \
src/governance/*.h \
src/llmq/*.cpp \
src/llmq/*.h \
src/masternode/*.cpp \
src/masternode/*.h \
src/privatesend/*.cpp \
src/privatesend/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* build: Remove -I for everything but project root
Remove -I from build system for everything but the project root,
and built-in dependencies.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/Makefile.test.include
* qt: refactor: Use absolute include paths in .ui files
* qt: refactor: Changes to make include paths absolute
This makes all include paths in the GUI absolute.
Many changes are involved as every single source file in
src/qt/ assumes to be able to use relative includes.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/qt/dash.cpp
# src/qt/optionsmodel.cpp
# src/qt/test/rpcnestedtests.cpp
* test: refactor: Use absolute include paths for test data files
* Recommend #include<> syntax in developer notes
* refactor: Include obj/build.h instead of build.h
* END BACKPORT #11651 Remove trailing whitespace causing travis failure
* fix backport 11651
Signed-off-by: Pasta <pasta@dashboost.org>
* More of 11651
* fix blockchain.cpp
Signed-off-by: pasta <pasta@dashboost.org>
* Add missing "qt/" in includes
* Add missing "test/" in includes
* Fix trailing whitespaces
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: MeshCollider <dobsonsa68@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Masternodes must have required services enabled
* Add a comment about missing bits
* Refactor *InitParameterInteraction parts to follow surrounding code logic
Changes:
- move all related param interactions to appropriate places;
- try to softly set required params, complain and fail to start later if smth is not ok.
* Drop redundant code
a357293 Use MakeUnique<Db>(...) (practicalswift)
3e09b39 Use MakeUnique<T>(...) instead of std::unique_ptr<T>(new T(...)) (practicalswift)
8617989 Add MakeUnique (substitute for C++14 std::make_unique) (practicalswift)
d223bc9 Use unique_ptr for pcoinscatcher/pcoinsdbview/pcoinsTip/pblocktree (practicalswift)
b45c597 Use unique_ptr for pdbCopy (Db) and fix potential memory leak (practicalswift)
29ab96d Use unique_ptr for dbenv (DbEnv) (practicalswift)
f72cbf9 Use unique_ptr for pfilter (CBloomFilter) (practicalswift)
8ccf1bb Use unique_ptr for sem{Addnode,Outbound} (CSemaphore) (practicalswift)
73db063 Use unique_ptr for upnp_thread (boost::thread) (practicalswift)
0024531 Use unique_ptr for dbw (CDBWrapper) (practicalswift)
fa6d122 Use unique_ptr:s for {fee,short,long}Stats (TxConfirmStats) (practicalswift)
5a6f768 Use unique_ptr for httpRPCTimerInterface (HTTPRPCTimerInterface) (practicalswift)
860e912 Use unique_ptr for pwalletMain (CWallet) (practicalswift)
Pull request description:
Use `std::unique_ptr` (C++11) where possible.
Rationale:
1. Avoid resource leaks (specifically: forgetting to `delete` an object created using `new`)
2. Avoid undefined behaviour (specifically: double `delete`:s)
**Note to reviewers:** Please let me know if I've missed any obvious `std::unique_ptr` candidates. Hopefully this PR should cover all the trivial cases.
Tree-SHA512: 9fbeb47b800ab8ff4e0be9f2a22ab63c23d5c613a0c6716d9183db8d22ddbbce592fb8384a8b7874bf7375c8161efb13ca2197ad6f24b75967148037f0f7b20c
* Merge #11117: Prepare for non-Base58 addresses
864cd2787 Move CBitcoinAddress to base58.cpp (Pieter Wuille)
5c8ff0d44 Introduce wrappers around CBitcoinAddress (Pieter Wuille)
Pull request description:
This patch removes the need for the intermediary Base58 type `CBitcoinAddress`, by providing {`Encode`,`Decode`,`IsValid`}`Destination` functions that directly operate on the conversion between `std::string`s and `CTxDestination`.
As a side, it also fixes a number of indentation issues, and removes probably several unnecessary implicit `CTxDestination`<->`CBitcoinAddress` conversions.
This change is far from complete. In follow-ups I'd like to:
* Split off the specific address and key encoding logic from base58.h, and move it to a address.h or so.
* Replace `CTxDestination` with a non-`boost::variant` version (which can be more efficient as `boost::variant` allocates everything on the heap, and remove the need for `boost::get<...>` and `IsValidDestination` calls everywhere).
* Do the same for `CBitcoinSecret`, `CBitcoinExtKey`, and `CBitcoinExtPubKey`.
However, I've tried to keep this patch to be minimally invasive, but still enough to support non-Base58 addresses. Perhaps a smaller patch is possible to hack Bech32 support into `CBitcoinAddress`, but I would consider that a move in the wrong direction.
Tree-SHA512: c2c77ffb57caeadf2429b1c2562ce60e8c7be8aa9f8e51b591f354b6b441162625b2efe14c023a1ae485cf2ed417263afa35c892891dfaa7844e7fbabccab85e
* CBitcoinAddress -> EncodeDestination in providertx.h
Signed-off-by: Pasta <pasta@dashboost.org>
* more CBitcoinAddress -> EncodeDestination in providertx.h
Signed-off-by: Pasta <pasta@dashboost.org>
* more CBitcoinAddress -> EncodeDestination in providertx.h
Signed-off-by: Pasta <pasta@dashboost.org>
* more CBitcoinAddress -> EncodeDestination in providertx.h
Signed-off-by: Pasta <pasta@dashboost.org>
* fix CBitcoinAddress GetKeyID check
Signed-off-by: Pasta <pasta@dashboost.org>
* fix providertx.cpp
Signed-off-by: Pasta <pasta@dashboost.org>
* hopefully fix governance-classes.cpp
Signed-off-by: Pasta <pasta@dashboost.org>
* partially fix governance-validators.cpp, unable to resolve "address.IsScript()"
Signed-off-by: Pasta <pasta@dashboost.org>
* partially fix governance-classes.cpp, unable to resolve "address.IsScript()"
Signed-off-by: Pasta <pasta@dashboost.org>
* fix governance-classes.h
Signed-off-by: Pasta <pasta@dashboost.org>
* DecodeTransaction -> DecodeDestination, fix governance-validators.cpp
Signed-off-by: Pasta <pasta@dashboost.org>
* More fixes for 3294
* Move GetIndexKey into rpc/misc.cpp near getAddressesFromParams
No need to have it in base58.cpp anymore as this is only used in getAddressesFromParams
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: Alexander Block <ablock84@gmail.com>
This has the wanted side effect of proper locking of "cs" inside
CommitCurTransaction and RollbackCurTransaction, which was not easily
possible to implement in the generic version. This fixes some rare crashes.
* Implement CompactFull() in CDBWrapper
This allows to compact the whole DB in one go.
* Implement more compact version of CDeterministicMNListDiff
This introduces CDeterministicMNStateDiff which requires to only store
fields on-disk which actually changed.
* Avoid writing mnUniquePropertyMap to disk when storing snapshots
This map can be rebuilt by simply using AddMN for each deserialized MN.
* Implement Serialize/Unserialize in CScript
This allows us to directly use READWRITE() on scripts and removes the need
for the ugly cast to CScriptBase. This commit also changes all Dash specific
uses of CScript to not use the cast.
* Keep track of registeration counts and introduce internalID for masternodes
The "internalId" is simply the number of MNs registered so far when the
new MN is added. It is deterministic and stays the same forever.
* Use internalId as keys in MN list diffs
This reduces the used size on-disk.
* Two simple speedups in MN list diff handling
1. Avoid full compare if dmn or state pointers match in BuildDiff
2. Use std::move when adding diff to listDiff in GetListForBlock
* Implement upgrade code for old CDeterministicMNListDiff format to new format
* Track tipIndex instead of tipHeight/tipBlockHash
* Store and pass around CBlockIndex* instead of block hash and height
This allows us to switch CDeterministicMNManager::GetListForBlock to work
with CBlockIndex.
* Refactor CDeterministicMNManager::GetListForBlock to require CBlockIndex*
Instead of requiring a block hash. This allows us to remove blockHash and
prevBlockHash from CDeterministicMNListDiff without the use of cs_main
locks in GetListForBlock.
* Remove prevBlockHash, blockHash and nHeight from CDeterministicMNListDiff
* Remove access to determinisitcMNManager in CMasternodeMetaMan::ToString()
The deterministic MN manager is not fully initialized yet at the time this
is called, which results in an empty list being returned everytime.
* Better logic to determine if an upgrade is needed
Reuse the "best block" logic to figure out if an upgrade is needed. Also
use it to ensure that older nodes are unable to start after the upgrade
was performed.
* Return null block hash if it was requested with getmnlistdiff
* bump CGovernanceManager::SERIALIZATION_VERSION_STRING
* Check SERIALIZATION_VERSION_STRING before deserializing anything else
* Invoke Clear() before deserializing just to be sure
* Specialize Serialize(CSizeComputer&) for BLS objects
Speeds up size computation for BLS objects.
* Track memory usage in CDBTransaction and CEvoDB
* Take memory used by CEvoDB/CDBTransaction into account when flushing
* Implement specialized SerReadWrite for immer maps
This allows to use READWRITE and fixes compilation errors with CSizeComputer
* Log EvoDB memory usage independently
Co-Authored-By: UdjinM6 <UdjinM6@users.noreply.github.com>
c1082a7 Chainparams: Use the factory for pow tests (Jorge Timón)
2351a06 Chainparams: Get rid of CChainParams& Params(std::string) (Jorge Timón)
f87f362 Chainparams: Use a regular factory for creating chainparams (Jorge Timón)
Tree-SHA512: 359c8a2a1bc9d02db7856d02810240ada28048ac088f878b575597a7255cdb0ffdd1a647085ee67a34c6a7e7ed9e6cfdb61240cf6e75139619b640dbb096072c
0f3471f net: make CNode's id private (Cory Fields)
9ff0a51 scripted-diff: net: Use accessor rather than node's id directly (Cory Fields)
e50c33e devtools: add script to verify scriptable changes (Cory Fields)
skipped travis changes
Tree-SHA512: a0ff50f4e1d38a2b63109b4996546c91b3e02e00d92c0bf04f48792948f78b1f6d9227a15d25c823fd4723a0277fc6a32c2c1287c7abbb7e50fd82ffb0f8d994
pnode->id to pnode->GetId()
Signed-off-by: Pasta <pasta@dashboost.org>
* Generalize CBLSLazyWrapper so that it can be used of pubkeys and secret keys
* Implement == and != operators for CBLSLazyWrapper
* Implement cached hash for CBLSLazyWrapper
* Use CBLSLazyPublicKey for CDeterministicMNState::pubKeyOperator
* Speed up GetProjectedMNPayees by sorting the MN list by last paid
Instead of updating a temporary list for each projected height and calling
GetMNPayee() on it.
* Cache intermediate lists in GetListForBlock
This avoids re-loading and applying diffs again and again.
* Only update masternode list UI max once every 3 seconds
This avoids updating the UI on every block, which turned out to be very
expensive.
* Fix compilation
* Drop time restrictions for mn list update in ClientModel
They are fully handled by MasternodeList now.
* Merge #8824: Refactor TxToJSON() and ScriptPubKeyToJSON()
0ff9320 refactor TxToJSON() and ScriptPubKeyToJSON() (jonnynewbs)
Tree-SHA512: caf7d590829e221522edd5b1ab8ce67b53a2c6986d3bbe8477eab420b1007bf60f885ed0a25ba9587e468c00768360ddc31db37847e862858573eaed5ed8b0d6
* remove witness and vsize
Signed-off-by: Pasta <Pasta@dash.org>
* Add valueSat
To preserve rpc output format
* Move extrapayload and special tx json output to `TxToUniv`
* Add spent index info
NotifyMasternodeListChanged is called before the tip is updated which means we can't rely on GetListAtChainTip() and have to pass the list into CClientUIInterface
* Contains dashification. disables `-debug dash`
Merge #9424: Change LogAcceptCategory to use uint32_t rather than sets of strings.
6b3bb3d Change LogAcceptCategory to use uint32_t rather than sets of strings. (Gregory Maxwell)
Tree-SHA512: ebb5bcf9a7d00a32dd1390b727ff4d29330a038423611da01268d8e1d2c0229e52a1098e751d4e6db73ef4ae862e1e96d38249883fcaf12b68f55ebb01035b34
Signed-off-by: Pasta <Pasta@dash.org>
31 -> 32
Signed-off-by: Pasta <Pasta@dash.org>
* Merge #10123: Allow debug logs to be excluded from specified component
3bde556 Add -debugexclude option to switch off logging for specified components (John Newbery)
Tree-SHA512: 30202e3f2085fc2fc5dd4bedb92988f4cb162c612a42cf8f6395a7da326f34975ddc347f82bc4ddca6c84c438dc0cc6e87869f90c7ff88105dbeaa52a947fa43
* bump to uint64_t due to added Dash codes
Signed-off-by: Pasta <Pasta@dash.org>
* bump to uint64_t due to added Dash codes cont.
Signed-off-by: Pasta <Pasta@dash.org>
* string -> BCLog format
Signed-off-by: Pasta <Pasta@dash.org>
* uint32_t -> uint64_t
Signed-off-by: Pasta <Pasta@dash.org>
* Fix CBatchedLogger
* Fix most fDebug-s
* Fix `debug` rpc
* Fix BENCH and RAND conflicts
* Add ALERT and use it
* Update LogPrint-s in dash-specific code
* Tweak few log categories
Specifically:
- use PRIVATESEND in `CPrivateSendClientManager::GetRandomNotUsedMasternode()`
- use ZMQ in `CZMQPublishRawGovernanceVoteNotifier::NotifyGovernanceVote()` and `CZMQPublishRawGovernanceObjectNotifier::NotifyGovernanceObject()`
* Drop no longer used MASTERNODE category
* Merge #10153: logging: Fix off-by-one for shrinkdebugfile default
faab624 logging: Fix off-by-one for shrinkdebugfile (MarcoFalke)
Tree-SHA512: d6153e06067906172ff0611af9e585a3ecf0a7d56925b6ad7c12e75aa802441047059b9b6f6c78e79916c3f2abc8f1998bfd2d5b84201ec6421f727c08da3c21
* Shift dash-specific log categories to start from `1ul << 32` to avoid potential future conflicts with bitcoin ones
* Fix `dash` category
* remove debugCategories
Signed-off-by: Pasta <Pasta@dash.org>
* Prepend "std::" to find call
* Check for BCLog::PRIVATESEND instead of logCategories != BCLog::NONE
* Use BCLog::MNPAYMENTS category instead of checking for logCategories != BCLog::NONE
* Move "End Dash" comment below "ALERT"
When adding new entries here, we'll otherwise get confused with ordering
and might end up forgetting that adding something Dash specific must
continue with the bit after 43.
* rename instantx.* file to instantsend.*
* Reorganize Dash Specific code into folders
add to privatesend folder the header files
Signed-off-by: Pasta <Pasta@dash.org>
add "masternode" to imports
Signed-off-by: Pasta <Pasta@dash.org>
add "masternode" to imports
Signed-off-by: Pasta <Pasta@dash.org>
add "masternode" to imports pt 2
Signed-off-by: Pasta <Pasta@dash.org>
* Trivial: vout->txout
* Re-use SetHexStr in few more places
* Tweak log output
* fix v13 release notes links
* Drop no longer used stuff
* Few more trivial fixes
* Adjust few rpc help strings
* Apply review suggestions
* Harden DIP3 activation height
Also drop all related but no longer used parts.
* Pass current block index to GetCommitmentsFromBlock
* Allow to change dip3 activation height for tests
And fix them.
* Don't disconnect peers on MNAUTH verification failure
Only give them a DoS score.
* Re-add cs_main lock
Co-Authored-By: codablock <ablock84@gmail.com>
This fixes a bug in ScanQuorums which made it return quorums which were not
mined at the time of pindexStart. This was due to quorumHashes being based
on older blocks (the phase=0 block) which are ancestors of pindexStart even
if the commitment was actually mined in a later block.
GetMinedAndActiveCommitmentsUntilBlock is also going to be used for quorum
commitment merkle roots in CCbTx.
This also removes GetFirstMinedQuorumHash as it's not needed anymore.
* Sort evo/* source files in Makefile.am
* Keep track of proRegTxHash in CConnman::masternodeQuorumNodes map
We will later need the proRegTxHash
* Fix serialization of std::tuple with const rvalue elements
Having serialization and deserialization in the same specialized template
results in compilation failures due to the "if(for_read)" branch.
* Implement MNAUTH message
This allows masternodes to authenticate themself.
* Protect fresh incoming connections for a second from eviction
Give fresh connections some time to do the VERSION/VERACK handshake and
an optional MNAUTH when it's a masternode. When an MNAUTH happened, the
incoming connection is then forever protected against eviction.
If a timeout of 1 second occurs or the first message after VERACK is not
MNAUTH, the node is not protected anymore and becomes eligable for
eviction.
* Avoid connecting to masternodes if an incoming connection is from the same one
Now that incoming connections from MNs authenticate them self, we can avoid
connecting to the same MNs through intra-quorum connections.
* Apply review suggestions
* Let Commit() return void
The boolean return value will loose its meaning in the next commit
* Implement 2-stage commits for CDBTransaction and CScopedDBTransaction
CDBTransaction is changed to allow CDBBatch, CDBWrapper and other
CDBTransactions as parent instead of just CDBWrapper. This in turn allows
to implement multi-staged commits in CEvoDB.
We now have the "current transaction" which is started and ended (commit
or rollback) for each call to Connect-/DisconnectBlock. When the current
transaction is committed, it moves its contents into the "root transaction"
instead of directly writing to CDBWrapper.
CommitRootTransaction() then handles the final commitment to CDBWrapper. It
is called at the same time when the chainstate is flushed to disk, which
guarantees consistency between chainstate and CEvoDB.
* Allow to efficiently move values into parent transactions to avoid copies
When CDBTransaction<CDBTransaction<...>>::Commit() is called, we can avoid
copying values from this transaction to the parent transaction and instead
pass values by rvalue and let the contents be moved.
* Revert "Force FlushStateToDisk on ConnectTip/DisconnectTip while not in IBD (#2560)"
This reverts commit 6dfceaba5a.
* Fix incorrect usage of begin() when genesis block is requested in "protx diff"
.begin() on mapBlockIndex does NOT return the genesis block, but just the
block with lowest hash.
The fix is to use chainActive[0] to get the genesis block.
* Update src/evo/simplifiedmns.cpp
Co-Authored-By: codablock <ablock84@gmail.com>
* Do not process blocks in CDeterministicMNManager before dip3 activation
This should save us some cpu/disk on initial sync/reindex
* Write initial snapshot on dip3 activation
* Do not access wallet directly from masternodelist ui, use wallet model instead
* Don't access deterministicMNManager from UI directly, use client model instead
* Send just a general signal to UI elements when mn list has changed and let them handle it in their specific ways
* Drop mn list update timers and use signals instead
* some cleanup
* Move initial UI update to init.cpp
* Refactor getMasternodeList()
* Rename setMasternodeCount to updateMasternodeCount
* Drop legacy code in comments
* Drop NotifyMasternodeListChanged from uiInterface and use NotifyBlockTip instead
* Add `owneraddress` and `votingaddress` to json representation of provider txes and rpc output
* Rearrange/unify things a bit
* Add votingAddress to CSimplifiedMNListEntry json
* Use addresses in error messages too
* More unification
* Swap keyIDOwner/keyIDVoting with corresponding addresses in ToString()
* Drop keyIDOwner/keyIDVoting from json and rpc
* More unification: s/operatorRewardAddress/operatorPayoutAddress/
* More unification/cleanup: use specific name instead of just bitcoinAddress
* Fix dip3 test
* Remove CActiveLegacyMasternodeManager
* Remove sentinelping RPC
* Remove unused P2P messages and inv types
There are still places where these are used in the code. The next commits
will clean these up.
* Remove MNB/MNP/MNVERIFY related code from masternode(man).h/cpp
* Remove all legacy code regarding block MN payee voting
* Remove MASTERNODE_SYNC_LIST and MASTERNODE_SYNC_MNW states
Also replace all uses of IsMasternodeListSynced and IsWinnersListSynced
with IsBlockchainSynced.
* Remove unsupported masternode RPCs
* Remove UpdateLastPaid methods
* Remove duplicate deterministicmns.h include
* Remove masternode.conf support
* Remove legacy MN lists support from masternode list GUI
* Remove unnecessary AskForMN call
* Remove compatibility code in CPrivateSendQueue::GetSignatureHash
* Don't add locally calculated MN payee in case GetBlockTxOuts failed
This is not valid in DIP3 mode
* Remove check for IsDeterministicMNsSporkActive in "masternode status"
* Move CMasternode::IsValidNetAddr to CActiveDeterministicMasternodeManager
* Remove use of CMasternode::CheckCollateral in governance code
* Remove uses of MASTERNODE_SENTINEL_PING_MAX_SECONDS/MASTERNODE_SENTINEL_PING_MAX_SECONDS
* Remove support for "-masternodeprivkey"
* Remove pre-DIP3 vote cleanup
* Remove compatibility code for quorumModifierHash/masternodeProTxHash
* Remove check for invalid nBlockHeight in CMasternodePayments::GetBlockTxOuts
...and let it crash instead. We expect this method to be called with the
correct height now (after DIP3 was fully deployed).
* Remove ECDSA based Sign/CheckSignature from CGovernanceObject
Only masternodes sign governance objects, so there is no need for ECDSA
support here anymore.
* Always add superblock and MN reward payments into new block
* Always check block payees (except if fLiteMode==true)
* Always allow superblock and MN payees in same block
* Remove/Fix a few references to masternode.conf and related stuff
Also delete guide-startmany.md and masternode_conf.md
* Implement NotifyMasternodeListChanged signal and call governance maintenance
* Remove non-DIP3 code path from CMasternodeMan::Find
* Remove remaining unused code from CMasternode/CMasternodeMan
* Always load governance.dat on startup
* Mine an empty block instead of incrementing nHeight from chain tip in miner tests
This test is crashing otherwise in GetBlockTxOuts as it tries to access a
previous block that is not existing.
* Skip MN payments verification on historical blocks (pre-DIP3 blocks)
Even though DIP3 was active on BIP9 level, the spork was not active yet at
that point meaning that payments were not enforced at that time.
* Remove unused state and CollateralStatus enums
* Unconditionally return false from IsBlockPayeeValid when IsTransactionValid returns false
IsTransactionValid already handles the case where IsDIP3Active() returns
false, making it return true.
* Add override keyword to CDSNotificationInterface::NotifyMasternodeListChanged
* Fix help for masternodelist status (POSE_BANNED and no OUTPOINT_SPENT)
* Replace IsDeterministicMNsSporkActive with IsDIP3Active
IsDIP3Active will now use a fixed parameter from consensus params.
Values for DIP0003Height/DIP0003Hash need to be updated when spork15
activates on mainnet.
Also enforce correct block hash on testnet/mainnet for DIP3 activation
block.
* Remove SPORK_15_DETERMINISTIC_MNS_ENABLED
* Replace all uses of IsDeterministicMNsSporkActive with IsDIP3Active
* Remove DIP3 upgrade-path tests and directly start with DIP3 enabled tests
* Make -masternodeprivkey non-mandatory
This code will vanish later.
* Ensure EvoDB consistency by storing the best block hash
This approach is similar to the one used for chainstate currently.
Ensures that:
- nodes that upgraded after DIP3 has all the data processed correctly (they will crash and require reindex);
- evodb/ is removed when blocks/ is removed (otherwise sync will fail due to duplicate records).
* Implement CEvoDB::VerifyBestBlock/WriteBestBlock and call them from ConnectBlock/DisconnectBlock
* Fix walletbackup.py
* Don't delete/add values to the unique property map when it's null
This happens when revoking operator keys, as the revoked MN will then have
the address and operator keys set to the null representation. We shouldn't
add the null value to the unique property map as otherwise future revokes
crash in an assert.
* Assert that no null values are passed to Add/DeleteUniqueProperty
* Check for null values before calling Add/DeleteUniqueProperty
* Apply suggestions from code review
Co-Authored-By: codablock <ablock84@gmail.com>
* Add user generated default constructors to BLS primitives
Fixes build issues on Mac:
In file included from evo/deterministicmns.cpp:5:
./evo/deterministicmns.h:375:24: error: default initialization of an object of const type 'const CBLSPublicKey' without a user-provided default constructor
static const T nullValue;
^
All logging that happens in BuildNewListFromBlock is currently printed twice.
This is because BuildNewListFromBlock is called while processing the block
and also while calculating the DIP4 MN list commitment.
This commit adds the debugLogs to this method to allow omitting logs while
called from the DIP4 code.
* Allow to skip sig verification for CFinalCommitment::Verify
* Add CFinalCommitmentTxPayload and CheckLLMQCommitment and use it
As described in https://github.com/dashpay/dips/pull/31 (see discussion).
* Properly ban nodes for invalid commitments
* Add SPORK_17_QUORUM_DKG_ENABLED spork
* Implement CDummyDKG and CDummyCommitment until we have the real DKG merged
This is only used on testnet/devnet/regtest and will NEVER be used on
mainnet. It is NOT SECURE AT ALL!
See comment in quorums_dummydkg.h for more details.
* Test simple PoSe in DIP3 tests
* Generate 2 instead of 4 blocks per iteration in PoSe tests
4 was based on old chainparams where I used larger phases.
* Only sleep when necessary in PoSe tests
* Fix typo in comment
* Give PoSe tests more time and sync after fast-forward
Members which are not in the validMembers bitsets are now PoSe punished.
The maximum PoSe score is dynamic and mostly identical to the number of
registered MNs. Added PoSe scores for failures are then a percentage of
the maximum score, so that we can better control how often failures are
allowed per payment cycle. For LLMQ failures, this is 66% to allow
approximately 2 failures per payment cycle.
* Add LLMQ parameters to consensus params
* Add DIP6 quorum commitment special TX
* Implement CQuorumBlockProcessor which validates and handles commitments
* Add quorum commitments to new blocks
* Propagate QFCOMMITMENT messages to all nodes
* Allow special transactions in blocks which have no inputs/outputs
But only for TRANSACTION_QUORUM_COMMITMENT for now.
* Add quorum commitments to self-crafted blocks in DIP3 tests
* Add simple fork logic for current testnet
This should avoid a fork on the current testnet. It only applies to the
current chain which activated DIP3 at height 264000 and block
00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f.
When we revert the chain to retest the DIP3 deployment, this fork logic
can be removed again.
* Use quorumVvecHash instead of quorumHash to make null commitments unique
Implementation of https://github.com/dashpay/dips/pull/31
* Re-add quorum commitments after pruning mempool selected blocks
* Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements
Also add BEGIN/END markers for temporary code.
* Add comments/documentation to LLMQParams
* Move code which determines if a commitment is required into IsCommitmentRequired
This should make the code easier to read and also removes some duplication.
The also changes the error types that are possible from 3 to 2 now. Instead
of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is
only "bad-qc-not-allowed" now.
* Use new parameter from consensus parames for the temporary fork
* Properly initialize confirmedHash in CSimplifiedMNListEntry
* Add consensus params for temporary hard-fork on testnet
This hard-fork is required on testnet as we have to fix a few consensus
bugs in DIP3/DIP4. It will also be required to introduce LLMQ commitments
to testnet.
* Add temporary fork-logic for testnet, which sets confirmedHash to null
...before fork activation. Otherwise we'd invalidate all DIP3 blocks on
testnet.
* Bump nTemporaryTestnetForkHeight to 273000
