FindNode is only interested in active connections, especially when called
from OpenNetworkConnection. Connections which are about to get disconnected
and removed should be treated as if they are not existent anymore, as
otherwise there is a small race between disconnecting and reconnecting
nodes, causing OpenNetworkConnection to return early.
* Merge #10387: Eventually connect to NODE_NETWORK_LIMITED peers
eb91835 Add setter for g_initial_block_download_completed (Jonas Schnelli)
3f56df5 [QA] add NODE_NETWORK_LIMITED address relay and sync test (Jonas Schnelli)
158e1a6 [QA] fix mininode CAddress ser/deser (Jonas Schnelli)
fa999af [QA] Allow addrman loopback tests (add debug option -addrmantest) (Jonas Schnelli)
6fe57bd Connect to peers signaling NODE_NETWORK_LIMITED when out-of-IBD (Jonas Schnelli)
31c45a9 Accept addresses with NODE_NETWORK_LIMITED flag (Jonas Schnelli)
Pull request description:
Eventually connect to peers signalling NODE_NETWORK_LIMITED if we are out of IBD.
Accept and relay NODE_NETWORK_LIMITED peers in addrman.
Tree-SHA512: 8a238fc97f767f81cae1866d6cc061390f23a72af4a711d2f7158c77f876017986abb371d213d1c84019eef7be4ca951e8e6f83fda36769c4e1a1d763f787037
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/init.cpp
# src/protocol.h
# test/functional/node_network_limited.py
* remove witness
Signed-off-by: Pasta <pasta@dashboost.org>
* fix test expecting witness flag
Signed-off-by: Pasta <pasta@dashboost.org>
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
* #3248 use blue logo for Traditional theme
* review tab space and blue logo name
* change file order and spaces
* Revert "review tab space and blue logo name"
This reverts commit 31e0c3d0e9.
* Merge #13134: net: Add option `-enablebip61` to configure sending of BIP61 notifications
87fe292d897e09e176ac7e254144466c319cc9ac doc: Mention disabling BIP61 in bips.md (Wladimir J. van der Laan)
fe16dd8226d924f44432c5b5014aa49ff45c82ff net: Add option `-enablebip61` to configure sending of BIP61 notifications (Wladimir J. van der Laan)
Pull request description:
This commit adds a boolean option `-peersendreject`, defaulting to `1`, that can be used to disable the sending of [BIP61](https://github.com/bitcoin/bips/blob/master/bip-0061.mediawiki) `reject` messages. This functionality has been requested for various reasons:
- security (DoS): reject messages can reveal internal state that can be used to target certain resources such as the mempool more easily.
- bandwidth: a typical node sends lots of reject messages; this counts against upstream bandwidth. Also the reject messages tend to be larger than the message that was rejected.
On the other hand, reject messages can be useful while developing client software (I found them indispensable while creating bitcoin-submittx), as well as for our own test cases, so whatever the default becomes on the long run, IMO the functionality should be retained as option. But that's a discussion for later, for now it's simply a node operator decision.
Also adds a RPC test that checks the functionality.
Tree-SHA512: 9488cc53e13cd8e5c6f8eb472a44309572673405c1d1438c3488f627fae622c95e2198bde5ed7d29e56b948e2918bf1920239e9f865889f4c37c097c37a4d7a9
* 0.17 -> 0.16
Signed-off-by: Pasta <pasta@dashboost.org>
* tx1 -> base_ tx fixing 13134
Signed-off-by: Pasta <pasta@dashboost.org>
* move added bip61 message checking up
Signed-off-by: Pasta <pasta@dashboost.org>
* Dash specific code, only send reject messages if bip61 is enabled
Signed-off-by: Pasta <pasta@dashboost.org>
* Fix invalidtxrequest.py
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Merge #13151: net: Serve blocks directly from disk when possible
0bf431870e45d8e20c4671e51a782ebf97b75fac net: Serve blocks directly from disk when possible (Wladimir J. van der Laan)
Pull request description:
In `ProcessGetBlockData`, send the block data directly from disk if type MSG_WITNESS_BLOCK is requested. This is a valid shortcut as the on-disk format matches the network format.
This is expected to increase performance because a deserialization and subsequent serialization roundtrip is avoided.
Tree-SHA512: 9a9500b4c1354eaae1a6f1c6ef2416c1c1985029852589266f3a70e808f6c7482c135e9ab251a527566935378ab7c32dba4ed43ba5451e802d8e72b77d1ba472
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/net_processing.cpp
# src/validation.cpp
* fix extra bracket
Signed-off-by: Pasta <pasta@dashboost.org>
* remove read raw block from disk functions
Signed-off-by: Pasta <pasta@dashboost.org>
* correct `if (pblock)` scope
Signed-off-by: Pasta <pasta@dashboost.org>
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Instead of selecting every socket in every SocketHandler iteration, we will
now track which nodes are known to have pending receivable data and/or
have empty send buffers.
Each time recv fails to fill a whole receive buffer, fHasRecvData is
set to false so that the socket is added to the receive select set
in the next iteration. When that socket is signalled through select/poll,
fHasRecvData is set to true again and remains true until a future recv
fails.
Each time send fails to send a full message, fCanSendData is set to false
so that the socket is added to the send select set in the next iteration.
At the same time, nodes which have pending messages to send are tracked
in mapNodesWithDataToSend, so that SocketHandler knows for which nodes
SocketSendData must be invoked.
Deleting these from the DB means that future calls to GetListForBlock for
the reorged/orphaned block will return an empty MN list. At the same time,
GetListForBlock will add the empty list to the internal MN list cache.
This behavior is not acceptable for multiple reasons:
1. A caller of GetListForBlock should always expect a valid list if that
block was once in the best chain. We might otherwise run into strange
behavior (e.g. GetAllQuorumMembers returning zero members)
2. If the chain is ever reorged back to the initial chain (that was
orphaned), GetListForBlock should not return the invalid/empty cache
entry for the previously orphaned block.
This should also fix test failures seen on Gitlab CI
* Merge #10762: [wallet] Remove Wallet dependencies from init.cpp
c7ec524 [wallet] Add dummy wallet init class (John Newbery)
49baa4a [wallet] Use global g_wallet_init_interface to init/destroy the wallet. (John Newbery)
caaf972 [wallet] Create wallet init interface. (John Newbery)
5fb5421 [wallet] Move wallet init functions into WalletInit class. (John Newbery)
Pull request description:
This continues the work of #7965. This PR, along with several others, would remove the remaining dependencies from libbitcoin_server.a on libbitcoin_wallet.a.
To create the interface, I've just translated all the old init.cpp wallet function calls into an interface class. I've not done any thinking about whether it makes sense to change that interface by combining/splitting those calls. This is a purely internal interface, so there's no problem in changing it later.
Tree-SHA512: 32ea57615229c33fd1a7f2f29ebc11bf30337685f7211baffa899823ef74b65dcbf068289c557a161c5afffb51fdc38a2ee8180720371f64d433b12b0615cf3f
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/dashd.cpp
# src/init.cpp
* a couple of fixes
Signed-off-by: Pasta <pasta@dashboost.org>
* move privatesend launch options help into wallet/init.cpp
Signed-off-by: Pasta <pasta@dashboost.org>
* remove ENABLE_WALLET for AutoLockMasternodeCollaterals
Signed-off-by: Pasta <pasta@dashboost.org>
* move a wallet param interaction into wallet/init.cpp
Signed-off-by: Pasta <pasta@dashboost.org>
* move PrivateSend init to wallet/init.h
Signed-off-by: Pasta <pasta@dashboost.org>
* move privatesend scheduler into wallet.cpp
Signed-off-by: Pasta <pasta@dashboost.org>
* remove unneeded import
Signed-off-by: Pasta <pasta@dashboost.org>
* move KeePass init and InitAutoBackup into wallet/init.cpp
Signed-off-by: Pasta <pasta@dashboost.org>
* Fix 10762
Changes:
- Should backup wallets before trying to verify them. This is because `-salvagewallet` is very dangerous and can actually corrupt wallets making them irreparably broken.
- No reason to make `schedulePrivateSendClientMaintenance` a part of the wallet (interface) because `privateSendClient` is a global object not tied to the wallet directly atm.
- Should not run client-side mixing on masternodes.
- Fix `InitAutoBackup` signature in `DummyWalletInit`.
* remove boost dependancy in wallet/init.cpp
Signed-off-by: pasta <pasta@dashboost.org>
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
This was only used in only one remaining place and only to ensure that
reject messages are sent before closing sockets. This is solved by the
previous commit now.
This change is quite invasive for integration tests, as they all expect
connections to be dropped ASAP. The next commits all try to fix the upcoming
issues.
73041c3c99 RPC Docs: addmultisigaddress is intended for non-watchonly addresses (Gregory Sanders)
Pull request description:
Spent a couple hours debugging why my p2sh watchonly funds were not appearing in various accounting calls when address was imported via `addmultisigaddress`.
Tree-SHA512: 0673e276e5ca8cdc4c9357bd835a29bd5a994520a78179600944932c700917142930288bf179f5e89b0874beaf1a88bd70129f3a297a46df42a10bab847017bb
