* Introduce SynchronousUpdatedBlockTip signal
This version of UpdatedBlockTip mirrors the asynchronous behavior that we
had before the introduction of asynchronous signal handling.
* Fix tab spacing in validationinterface.cpp
* Invoke CDeterministicMNManager::UpdatedBlockTip from validation thread
It must be invoked synchronously as otherwise things become inconsistent.
* Call CActiveMasternodeManager::Init with block index
pindexNew in UpdatedBlockTip is not necessarily the current tip, so we
shouldn't rely on it in Init(). This is due to the async nature of the
UpdatedBlockTip invocation.
* scripted-diff: Replace #include "" with #include <> (ryanofsky)
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* scripted-diff: Replace #include "" with #include <> (Dash Specific)
-BEGIN VERIFY SCRIPT-
for f in \
src/bls/*.cpp \
src/bls/*.h \
src/evo/*.cpp \
src/evo/*.h \
src/governance/*.cpp \
src/governance/*.h \
src/llmq/*.cpp \
src/llmq/*.h \
src/masternode/*.cpp \
src/masternode/*.h \
src/privatesend/*.cpp \
src/privatesend/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* build: Remove -I for everything but project root
Remove -I from build system for everything but the project root,
and built-in dependencies.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/Makefile.test.include
* qt: refactor: Use absolute include paths in .ui files
* qt: refactor: Changes to make include paths absolute
This makes all include paths in the GUI absolute.
Many changes are involved as every single source file in
src/qt/ assumes to be able to use relative includes.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/qt/dash.cpp
# src/qt/optionsmodel.cpp
# src/qt/test/rpcnestedtests.cpp
* test: refactor: Use absolute include paths for test data files
* Recommend #include<> syntax in developer notes
* refactor: Include obj/build.h instead of build.h
* END BACKPORT #11651 Remove trailing whitespace causing travis failure
* fix backport 11651
Signed-off-by: Pasta <pasta@dashboost.org>
* More of 11651
* fix blockchain.cpp
Signed-off-by: pasta <pasta@dashboost.org>
* Add missing "qt/" in includes
* Add missing "test/" in includes
* Fix trailing whitespaces
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: MeshCollider <dobsonsa68@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Check MNs up to 24 blocks deep when verifying `dstx`
* Handle DSTX-es more like regular txes and not like "other" invs
* Try asking for a DSTX too when trying to find missing tx parents
* Check DSTX-es when chainlock arrives
`HasChainLock` was always `false` in `IsExpired` because tip is updated before the corresponding chainlock is received
* Apply `Handle DSTX-es more like regular txes` idea to `AlreadyHave()`
* Alternative handling of DSTX+recentRejects
Co-authored-by: Alexander Block <ablock84@gmail.com>
* Pass nAcceptTime via TransactionAddedToMempool and use it for ChainLocks
Otherwise the "first seen" time is way off after node restart
* Don't skip TransactionAddedToMempool for chainlocks while blockchain is not synced yet
Otherwise txes from mempool.dat won't be processed there
* Remove ppszTypeName from protocol.cpp and reimplement GetCommand
This removes the need to carefully maintain ppszTypeName, which required
correct order and also did not allow to permanently remove old message
types.
To get the command name for an INV type, GetCommandInternal uses a switch
which needs to be maintained from now on.
The way this is implemented also resembles the way it is implemented in
Bitcoin today, but it's not identical. The original PR that introduced the
switch case in Bitcoin was part of the Segwit changes and thus never got
backported. I decided to implement it in a slightly different way that
avoids throwing exceptions when an unknown INV type is encountered.
IsKnownType will now also leverage GetCommandInternal() to figure out if
the INV type is known locally. This has the side effect of old/legacy
message types to return false from now on. We will depend on this side
effect in later commits when we remove legacy InstantSend code.
* Stop handling/relaying legacy IX messages
When we receive an IX message, we simply treat it as a regular TX and relay
it as such.
We'll however still request IX messages when they are announced to us. We
can't simply revert to requesting TX messages in this case as it might
result in the other peer not answering due to the TX not being in mapRelay
yet. We should at some point in the future completely drop handling of IX
messages instead.
* Remove IsNewInstantSendEnabled() and only use IsInstantSendEnabled()
* Remove legacy InstantSend from GUI
* Remove InstantSend from Bitcoin/Dash URIs
* Remove legacy InstantSend from RPC commands
* Remove legacy InstantSend from wallet
* Remove legacy instantsend.h include
* Remove legacy InstantSend from validation code
* Completely remove remaining legacy InstantSend code
* Remove now unused spork
* Fix InstantSend related test failures
* Remove now obsolete auto IS tests
* Make spork2 and spork3 disabled by default
This should have no influence on mainnet as these sporks are actually set
there. This will however affect regtest, which shouldn't have LLMQ based
InstantSend enabled by default.
* Remove instantsend tests from dip3-deterministicmns.py
These were only testing legacy InstantSend
* Fix .QCheckBox#checkUsePrivateSend styling a bit
* s/TXLEGACYLOCKREQUEST/LEGACYTXLOCKREQUEST/
* Revert "verified via InstantSend" back to "verified via LLMQ based InstantSend"
* Use cmd == nullptr instead of !cmd
* Remove last parameter from AvailableCoins call
This was for fUseInstantSend which is not present anymore since rebase
* Decouple lite mode and client-side PrivateSend
`-enableprivatesend`:
1. off by default in lite mode but can be overridden
2. does not start mixing, use `-privatesendautostart` (default is off) or `privatesend` rpc instead
* Disable PS when there is no wallet, do not auto-start mixing when wallet is locked
* Check for `!fEnablePrivateSend` and `!fPrivateSendRunning` instead of `!pwalletMain` in ps client code
* Add meaningful `privatesend` rpc error messages for various cases when mmixing is disabled
This commit moves all logic of SyncTransaction into ProcessNewTransaction
and then calls it from TransactionAddedToMempool and BlockConnected.
This won't compile/work at first, but the next commits will fix this.
* rename instantx.* file to instantsend.*
* Reorganize Dash Specific code into folders
add to privatesend folder the header files
Signed-off-by: Pasta <Pasta@dash.org>
add "masternode" to imports
Signed-off-by: Pasta <Pasta@dash.org>
add "masternode" to imports
Signed-off-by: Pasta <Pasta@dash.org>
add "masternode" to imports pt 2
Signed-off-by: Pasta <Pasta@dash.org>
* Trivial: vout->txout
* Re-use SetHexStr in few more places
* Tweak log output
* fix v13 release notes links
* Drop no longer used stuff
* Few more trivial fixes
* Adjust few rpc help strings
* Apply review suggestions
* Harden DIP3 activation height
Also drop all related but no longer used parts.
* Pass current block index to GetCommitmentsFromBlock
* Allow to change dip3 activation height for tests
And fix them.
* Sort evo/* source files in Makefile.am
* Keep track of proRegTxHash in CConnman::masternodeQuorumNodes map
We will later need the proRegTxHash
* Fix serialization of std::tuple with const rvalue elements
Having serialization and deserialization in the same specialized template
results in compilation failures due to the "if(for_read)" branch.
* Implement MNAUTH message
This allows masternodes to authenticate themself.
* Protect fresh incoming connections for a second from eviction
Give fresh connections some time to do the VERSION/VERACK handshake and
an optional MNAUTH when it's a masternode. When an MNAUTH happened, the
incoming connection is then forever protected against eviction.
If a timeout of 1 second occurs or the first message after VERACK is not
MNAUTH, the node is not protected anymore and becomes eligable for
eviction.
* Avoid connecting to masternodes if an incoming connection is from the same one
Now that incoming connections from MNs authenticate them self, we can avoid
connecting to the same MNs through intra-quorum connections.
* Apply review suggestions
* Don't rely on UTXO set in CheckCanLock
The UTXO set only works for TXs in the mempool and won't work when we try
to retroactively lock unlocked TXs from blocks.
This is safe as ProcessTx is only called when a TX was accepted into the
mempool or connected in a block, which means that all input checks were
good.
* Rename RetryLockMempoolTxs to RetryLockTxs and let it retry connected TXs
* Instead of manually calling ProcessTx, let SyncTransaction handle all cases
SyncTransaction is called from AcceptToMemoryPool and when transactions got
connected in a block. So this is the time we want to run TXs through
ProcessTx. This also enables retroactive signing of TXs that were unknown
before a new block appeared.
* Test retroactive signing and safe TXs in LLMQ ChainLocks tests
* Also test for retroactive signing of chained TXs
* Honor lockedParentTx when looking for TXs to retry signing
* Stop scanning for TXs to retry after a depth of 6
* Generate 6 block to avoid retroactive signing overloading Travis
* Avoid retroactive signing
* Don't rely on NewPoWValidBlock and use SyncTransaction to build blockTxs
NewPoWValidBlock is not guaranteed to be called when blocks come in fast.
When a block is accepted in AcceptBlock, NewPoWValidBlock is only called
when the new block is a successor of the currently active tip. This is not
the case when after the first block a second block is accepted immediately
as the first block is not connected yet.
This might be a bug actually in the handling of NewPoWValidBlock, so we
might need to check/fix this later, but currently I prefer to not touch
that part.
Instead, we now use SyncTransaction to gather TXs for blockTxs. This works
because SyncTransaction is called for all transactions in a freshly
connected block in one go. The call also happens before UpdatedBlockTip is
called, so it's fine with the existing logic.
* Use tx.IsCoinBase() instead of checking index 0
Also check for empty vin.
* Split up remaining logic from CMasternodeMan into CMasternodeMetaMan and CMasternodeUtils
Also get rid of CMastermode and store remaining meta info
in CMasternodeMetaInfo
* Also allow non-const T in Serialize/Unserialize for shared_ptr
* Rename CActiveDeterministicMasternodeManager to CActiveMasternodeManager
* Fix nowallet compile in masternode-utils.cpp
* Remove CActiveLegacyMasternodeManager
* Remove sentinelping RPC
* Remove unused P2P messages and inv types
There are still places where these are used in the code. The next commits
will clean these up.
* Remove MNB/MNP/MNVERIFY related code from masternode(man).h/cpp
* Remove all legacy code regarding block MN payee voting
* Remove MASTERNODE_SYNC_LIST and MASTERNODE_SYNC_MNW states
Also replace all uses of IsMasternodeListSynced and IsWinnersListSynced
with IsBlockchainSynced.
* Remove unsupported masternode RPCs
* Remove UpdateLastPaid methods
* Remove duplicate deterministicmns.h include
* Remove masternode.conf support
* Remove legacy MN lists support from masternode list GUI
* Remove unnecessary AskForMN call
* Remove compatibility code in CPrivateSendQueue::GetSignatureHash
* Don't add locally calculated MN payee in case GetBlockTxOuts failed
This is not valid in DIP3 mode
* Remove check for IsDeterministicMNsSporkActive in "masternode status"
* Move CMasternode::IsValidNetAddr to CActiveDeterministicMasternodeManager
* Remove use of CMasternode::CheckCollateral in governance code
* Remove uses of MASTERNODE_SENTINEL_PING_MAX_SECONDS/MASTERNODE_SENTINEL_PING_MAX_SECONDS
* Remove support for "-masternodeprivkey"
* Remove pre-DIP3 vote cleanup
* Remove compatibility code for quorumModifierHash/masternodeProTxHash
* Remove check for invalid nBlockHeight in CMasternodePayments::GetBlockTxOuts
...and let it crash instead. We expect this method to be called with the
correct height now (after DIP3 was fully deployed).
* Remove ECDSA based Sign/CheckSignature from CGovernanceObject
Only masternodes sign governance objects, so there is no need for ECDSA
support here anymore.
* Always add superblock and MN reward payments into new block
* Always check block payees (except if fLiteMode==true)
* Always allow superblock and MN payees in same block
* Remove/Fix a few references to masternode.conf and related stuff
Also delete guide-startmany.md and masternode_conf.md
* Implement NotifyMasternodeListChanged signal and call governance maintenance
* Remove non-DIP3 code path from CMasternodeMan::Find
* Remove remaining unused code from CMasternode/CMasternodeMan
* Always load governance.dat on startup
* Mine an empty block instead of incrementing nHeight from chain tip in miner tests
This test is crashing otherwise in GetBlockTxOuts as it tries to access a
previous block that is not existing.
* Skip MN payments verification on historical blocks (pre-DIP3 blocks)
Even though DIP3 was active on BIP9 level, the spork was not active yet at
that point meaning that payments were not enforced at that time.
* Remove unused state and CollateralStatus enums
* Unconditionally return false from IsBlockPayeeValid when IsTransactionValid returns false
IsTransactionValid already handles the case where IsDIP3Active() returns
false, making it return true.
* Add override keyword to CDSNotificationInterface::NotifyMasternodeListChanged
* Fix help for masternodelist status (POSE_BANNED and no OUTPOINT_SPENT)
* Add SPORK_17_QUORUM_DKG_ENABLED spork
* Implement CDummyDKG and CDummyCommitment until we have the real DKG merged
This is only used on testnet/devnet/regtest and will NEVER be used on
mainnet. It is NOT SECURE AT ALL!
See comment in quorums_dummydkg.h for more details.
* Test simple PoSe in DIP3 tests
* Generate 2 instead of 4 blocks per iteration in PoSe tests
4 was based on old chainparams where I used larger phases.
* Only sleep when necessary in PoSe tests
* Fix typo in comment
* Give PoSe tests more time and sync after fast-forward
* Add BIP9 parameters for DIP3 deployment on testnet
* Remove autoix BIP9 deployment and reuse DIP3 deployment
* Add BIP9CheckMasternodesUpgraded to chain params
This controls if miners should check for upgraded masternodes first before
adding BIP9 bits to the block version. This only makes sense in network
where masternodes are up and running before BIP9 activation, which is not
necessarely the case in regtest and devnet.
Also refactor ComputeBlockVersion to use fCheckMasternodesUpgraded instead
of the inverse fAssumeMasternodeIsUpgraded. It is set to false by default
and only set to true in CreateNewBlock.
* Check for upgraded masternodes for DIP3 activation (only mainnet and testnet)
* Bump PROTOCOL_VERSION and DMN_PROTO_VERSION
We probably have nodes with 70211 already running on testnet.
* Remove global fDIP0003ActiveAtTip flag and always use VersionBitsState
fDIP0003ActiveAtTip was used much more often when introduced but turned out
to be not very useful in most places. Always use VersionBitsState now.
* Fix wrong use of VersionBitsState auto IX
* Make sure isAutoLockBip9Active flag is reset in case of chain reorgs
* add locktransaction rpc call
* Remove special instantsend fee for simple transactions
* Function to check if trx is simple enough to be autolocked
* Automatic lock for all received from peers simple trxes
If we get a new transaction with CInv message and it is "simple" and
is accepted in mempool, we initiate its lock. We don't lock orphan trxes
that accepted in mempool after this trx because they are locked by other
peers.
* Automatically lock simple trxes in wallet
* protocol bump for InstantSend without special fee
* Add function to detect used mempool share
* Mempool threshold for auto IX locks
* Add SPORK_16_INSTANTSEND_AUTOLOCKS spork
* Make autolocks active only when spork SPORK_16_INSTANTSEND_AUTOLOCKS is active
* BIP9 autolocks activation
* revert increasing min peer protocol version for mn rank
* move IsTrxSimple check to CTxLockRequest class
* make MAX_INPUTS_FOR_AUTO_IX private member of CTxLockRequest class
* make AUTO_IX_MEMPOOL_THRESHOLD private member of CInstantSend class
* remove locktransaction RPC call
* tests for automatic IS locks
* fix mempool threshod calculation
* bump mocktime in activate_autoix_bip9
* set node times
* no need to spam the node with gettransaction rpc requests that often
* use `spork active` instead of leaking spork logic into tests
* codestyle fixes
* add test description in comments
* fix typo
* sync test nodes more often during BIP9 activation
* Use 4th bit in BIP9 activation
* Fix comments according codestyle guide
* Call AcceptLockRequest and Vote at the first node creating autoix lock
* fix mempool used memory calculation
* rallback not necessary change in CWallet::CreateTransaction
* test for stopping autolocks for full mempool
* Inject "simple autolockable" txes into txlockrequest logic
* Allow disabling txindex in lite mode
* Do not load/store Dash-specific cache in lite mode
* Do not create/show masternode tab in lite mode
* Do not connect PS actions in lite mode
* Fix sync/ignore block updates in Dash submodules in lite mode
* Allow compilation with `--disable-wallet`
* fix remaining references
* Drop wallet references/include in CActiveMasternode and fix other files affected by this change
* Wrap privatesend-client.h include with ifdef/endif and fix other files affected by this change
* Re-enable Travis build with no wallet
reverts 267e57877b
