99fecf8 tests: Delete unused function _rpchost_to_args (Wladimir J. van der Laan)
Tree-SHA512: 40911d048d3fd7b3ce83e9b3caf2a409d55b47cbe08ea4450a16ca72264300bb12d5ef7dbcf335885975119b5977f949e6879546840064138fb506e24494d849
* Allow sub-batch verification in CBLSInsecureBatchVerifier
* Implement batch verification of CDKGDebugStatus messages
* Use uint8_t for statusBitset in CDKGDebugMemberStatus and CDKGDebugSessionStatus
No need to waste one byte per member and per LLMQ type.
* Reserve 4k of buffer for CSerializedNetMsg buffer
Profiling has shown that a lot of time is spent in resizing the data
vector when large messages are involved.
* Remove nHeight from CDKGDebugStatus
This field changes every block and causes all masternodes to propagate
its status for every block, even if nothing DKG related has changed.
* Leave out session statuses when we're not a member of that session
Otherwise MNs which are not members of DKG sessions will spam the network
* Remove receivedFinalCommitment from CDKGDebugSessionStatus
This is not bound to a session and thus is prone to spam the network when
final commitments are propagated in the finalization phase.
* Add "minableCommitments" to "quorum dkgstatus"
* Hold cs_main while calling GetMinableCommitment
* Abort processing of pending debug messages when spork18 gets disabled
* Don't ask for debug messages when we've already seen them
"statuses" only contains the current messages but none of the old messages,
so nodes kept re-requesting old messages.
* Use fast_dip3_enforcement instead of fast_dip3_activation
DashTestFramework was refactored before ChainLocks got merged, causing tests
to fail now.
* Move updating of DKG debug status into WaitForNextPhase
Otherwise callers of the RPCs might believe that the next phase has already
started and start producing more blocks, which would then cancel the
current session if it happens faster than the phase handler thread can
progress to the next phase.
* Implement copy_datadir to allow easy copying of state from one node to another
* Instead of starting with a fresh datadir for MNs, reuse a copy of the faucet
* Start masternodes in parallel instead of waiting for the previous to finish
* Allow specifying of window and threshold with -bip9params
* Implement -dip3activationheight for regtests
* Implement fast DIP3 activation in DashTestFramework
* Speed up activation of DIP3 in dip3-deterministicmns.py
* Update qa/rpc-tests/test_framework/test_framework.py
Co-Authored-By: codablock <ablock84@gmail.com>
* Always assign fast_dip3_activation
* Fix off-by-1 in phase calculations
* Fix wait_for_quorum_phase, should look for check_received_messages
* Fix wait_for_quorum_phase for complain phase
* Bump default timeout in wait_for_quorum_phase/wait_for_quorum_commitment to 15
* Fix cleanup of old recovered sigs
When iterating the db, we should also include entries that match exactly
the end time.
* Fix key not found error
* Raise AssertionError in case wait_for_quorum_phase/wait_for_quorum_commitment time out
* Add `owneraddress` and `votingaddress` to json representation of provider txes and rpc output
* Rearrange/unify things a bit
* Add votingAddress to CSimplifiedMNListEntry json
* Use addresses in error messages too
* More unification
* Swap keyIDOwner/keyIDVoting with corresponding addresses in ToString()
* Drop keyIDOwner/keyIDVoting from json and rpc
* More unification: s/operatorRewardAddress/operatorPayoutAddress/
* More unification/cleanup: use specific name instead of just bitcoinAddress
* Fix dip3 test
* Announce blocks as HEADERS instead of INV in comptool
Announcing as INV results in one GETHEADERS message per INV item with
every GETHEADERS containing the same block locator info. This in turn
results in many (1088 in p2p-fullblocktests) replies with each having i+1
headers. As every message is sent in one go, the message processing queue
gets overloaded, leading to GETDATA timeouts for blocks and thus failing
the tests.
Announcing the blocks directly with HEADERS avoids all this and results in
one GETDATA per announced header.
This will later conflict with backported improvements from Bitcoin. When we
get to this point, we can simply ignore changes on Dash's side and take
the improvements from Bitcoin (which also switch to header announcement,
but after some refactorings)
* Give wait_for_pings more time
Large reorgs as in the p2p-fullblocktest can cause very long long delays
for the ping that we're waiting for. This was not a problem before #2593,
as before this wait_until was waiting forever.
* Send larger amounts for IX
* Don't use node0 as sender of IX transactions
node0 tends to have many small UTXOs which result in TXs with many inputs
and high CPU usage.
* Merge #9744: Remove unused module from rpc-tests
a432aa0 Remove unused module from rpc-tests (Takashi Mitsuta)
* Merge #9696: [trivial] Fix recently introduced typos in comments
0c9b9b7 [trivial] Fix recently introduced typos in comments (practicalswift)
* Merge #9657: Improve rpc-tests.py
a6a3e58 Various review markups for rpc-tests.py improvements (John Newbery)
3de3ccd Refactor rpc-tests.py (John Newbery)
afd38e7 Improve rpc-tests.py arguments (John Newbery)
91bffff Use argparse in rpc_tests.py (John Newbery)
1581ecb Use configparser in rpc-tests.py (John Newbery)
* Merge #9724: Qt/Intro: Add explanation of IBD process
f6d18f5 Qt/Intro: Explain a bit more what will happen first time (Luke Dashjr)
50c5657 Qt/Intro: Storage shouldn't grow significantly with pruning enabled (Luke Dashjr)
9adb694 Qt/Intro: Move sizeWarningLabel text into C++ code (Luke Dashjr)
* Merge #9794: Minor update to qrencode package builder
1bfe6b4 Use package name variable inside $(package)_file_name variable (Mitchell Cash)
* Merge #9726: netbase: Do not print an error on connection timeouts through proxy
3ddfe29 netbase: Do not print an error on connection timeouts through proxy (Wladimir J. van der Laan)
13f6085 netbase: Make InterruptibleRecv return an error code instead of bool (Wladimir J. van der Laan)
* Merge #9727: Remove fallbacks for boost_filesystem < v3
056aba2 Remove fallbacks for boost_filesystem < v3 (Wladimir J. van der Laan)
* Merge #9485: ZMQ example using python3 and asyncio
b471daf Adddress nits, use asyncio signal handling, create_task (Bob McElrath)
4bb7d1b Add python version checks and 3.4 example (Bob McElrath)
5406d51 Rewrite to not use Polling wrapper for asyncio, link to python2.7 example (Bob McElrath)
5ea5368 ZMQ example using python3 and asyncio (Bob McElrath)
* Merge #9807: RPC doc fix-ups.
851f6a3 [qa][doc] Correct rpc test options in readme (fanquake)
41e7219 [trivial] Add tests_config.ini to .gitignore (fanquake)
* Dashify
Co-Authored-By: PastaPastaPasta <pasta@dashboost.org>
* Change file permissions
* update travis.yml -parallel -> --jobs
* Increment mocktime before setting new SPORK_16_INSTANTSEND_AUTOLOCKS value
Otherwise nodes will not update sporks as they use the same timestamps.
* Disable autoix while filling mempool
* Retest autoix and regular ix after clearing mempool
* Speed up autoix-mempool tests by making the max mempool smaller
With this less TXs have to be created to fill up the mempool.
* Change DashTestFramework to use DIP3 MNs
* Don't assert disabled bip9 in p2p-autoinstantsend.py
* Replace IsDeterministicMNsSporkActive with IsDIP3Active
IsDIP3Active will now use a fixed parameter from consensus params.
Values for DIP0003Height/DIP0003Hash need to be updated when spork15
activates on mainnet.
Also enforce correct block hash on testnet/mainnet for DIP3 activation
block.
* Remove SPORK_15_DETERMINISTIC_MNS_ENABLED
* Replace all uses of IsDeterministicMNsSporkActive with IsDIP3Active
* Remove DIP3 upgrade-path tests and directly start with DIP3 enabled tests
* Make -masternodeprivkey non-mandatory
This code will vanish later.
* Add an option to use specific address as a source of funds in protx rpc commands
* fix typo "must"
* Always use payoutAddress (or operatorPayoutAddress) as a default if no fundAddress was specified
* make sure we actually selected some inputs
* fundAddress -> feeSourceAddress
* Align help text with new logic
* fix protx_update_service
* fix protx_revoke
* Add fRequireAllInputs to CCoinControl and use it in FundSpecialTx
This avoids adding all inputs even though they are not needed.
* Allow to specify empty operator payout address and simplify fee code in update_service
DIP3 tests were failing to call "protx update_service" as it did not accept
an empty "operatorPayoutAddress".
This also simplifies handling of the feeSourceAddr.
* Specify source for funds and fees in DIP3 tests
* Ensure EvoDB consistency by storing the best block hash
This approach is similar to the one used for chainstate currently.
Ensures that:
- nodes that upgraded after DIP3 has all the data processed correctly (they will crash and require reindex);
- evodb/ is removed when blocks/ is removed (otherwise sync will fail due to duplicate records).
* Implement CEvoDB::VerifyBestBlock/WriteBestBlock and call them from ConnectBlock/DisconnectBlock
* Fix walletbackup.py
* Implement creation and propagation of dummy contributions
These act as a ping which is broadcast a few blocks before the dummy
commitments are created. They are meant to determine online/offline members.
* Use information about received dummy contributions to determine validMembers
* Fix PoSe tests
* Fix dummy DKG phase progress in PoSe tests and give tests more time
Mine one block at a time until we reach the mining phase.
* Fix spork syncing issue in sporks tests
https://github.com/dashpay/dash/pull/2522 caused an issue with sporks syncing
in tests. The introduced time check in CMasternodeSync::ProcessTick causes
masternode sync to never start when mocktime is enabled, so this commit
disables mocktime for sporks.py.
Disabling mocktime however leads to fInitialDownload never becoming false
in CMasternodeSync::UpdatedBlockTip, so mnsync is never started. To fix
this, the tests now create a block before connecting the last node.
This however doesn't work because node1 will ignore the "getheaders" request
from node2 as it has not finished mnsync yet...so we also have to force
finish mnsync for node1.
* Also respond with getdata for announced sporks while in IBD
There was never a good reason to ignore spork announcements while in IBD.
At the same time, this poses the risk of missing out on sporks while in IBD.
This also fixes an issue in sporks testing, as nodes did not request for
announced sporks.
* Use wait_to_sync instead of custom loop
* Add SPORK_17_QUORUM_DKG_ENABLED spork
* Implement CDummyDKG and CDummyCommitment until we have the real DKG merged
This is only used on testnet/devnet/regtest and will NEVER be used on
mainnet. It is NOT SECURE AT ALL!
See comment in quorums_dummydkg.h for more details.
* Test simple PoSe in DIP3 tests
* Generate 2 instead of 4 blocks per iteration in PoSe tests
4 was based on old chainparams where I used larger phases.
* Only sleep when necessary in PoSe tests
* Fix typo in comment
* Give PoSe tests more time and sync after fast-forward
* Sleep in wait_for_instant_lock when TX is not known yet
We'll otherwise stress the CPU quite a lot, which might in turn result in
instant send timeouts.
* Wait for all nodes to have the instant send lock
Otherwise individual nodes might end up not being able to catch up,
especially when it's the last iteration and we generate 6 blocks after it.
* Use getrawtransaction in wait_for_instant_lock instead of gettransaction
gettransaction fails if the TX is not owned by the wallet
* Give instant send tests more time after DIP3 activation
Signature verification changes to BLS when DIP3 gets activated, which is
much more resource hungry. Give instant send tests more time after DIP3
activation until we do proper batched verification of instant send
signatures.
* Add LLMQ parameters to consensus params
* Add DIP6 quorum commitment special TX
* Implement CQuorumBlockProcessor which validates and handles commitments
* Add quorum commitments to new blocks
* Propagate QFCOMMITMENT messages to all nodes
* Allow special transactions in blocks which have no inputs/outputs
But only for TRANSACTION_QUORUM_COMMITMENT for now.
* Add quorum commitments to self-crafted blocks in DIP3 tests
* Add simple fork logic for current testnet
This should avoid a fork on the current testnet. It only applies to the
current chain which activated DIP3 at height 264000 and block
00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f.
When we revert the chain to retest the DIP3 deployment, this fork logic
can be removed again.
* Use quorumVvecHash instead of quorumHash to make null commitments unique
Implementation of https://github.com/dashpay/dips/pull/31
* Re-add quorum commitments after pruning mempool selected blocks
* Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements
Also add BEGIN/END markers for temporary code.
* Add comments/documentation to LLMQParams
* Move code which determines if a commitment is required into IsCommitmentRequired
This should make the code easier to read and also removes some duplication.
The also changes the error types that are possible from 3 to 2 now. Instead
of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is
only "bad-qc-not-allowed" now.
* Use new parameter from consensus parames for the temporary fork
