f8c249ab91 Assert CPubKey::ValidLength to the pubkey's header-relevent size (Ben Woosley)
Pull request description:
A pubkey's length is specific to its type which is indicated by its header value. GetLen returns the header-indicated length, so this change ensures that a key matches its header-indicated length.
And replace some magic values with their constant equivalents.
Tree-SHA512: b727b39a631babe0932326396fc4d796ade8ec1e37454ff0c709ae9b78ecbd0cfdf59d84089ba8415e6efa7bc180e3cd39a14ddaf0871cbac54b96851e1b7b44
The ::value_type of the std::map/std::multimap/std::unordered_map containers is
std::pair<const Key, T>. Dropping the const results in an unnecessary copy,
for example in C++11 range-based loops.
For this I started with a more general scripted diff, then narrowed it down
based on the inspection showing that all actual map/multimap/unordered_map
variables used in loops start with m or have map in the name.
-BEGIN VERIFY SCRIPT-
sed -i -E 's/for \(([^<]*)std::pair<([^c])(.+) : m/for (\1std::pair<const \2\3 : m/' src/*.cpp src/**/*.cpp
sed -i -E 's/for \(([^<]*)std::pair<([^c])(.+) : (.*)map/for (\1std::pair<const \2\3 : \4map/' src/*.cpp src/**/*.cpp
-END VERIFY SCRIPT-
Signed-off-by: pasta <pasta@dashboost.org>
* scripted-diff: Replace #include "" with #include <> (ryanofsky)
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* scripted-diff: Replace #include "" with #include <> (Dash Specific)
-BEGIN VERIFY SCRIPT-
for f in \
src/bls/*.cpp \
src/bls/*.h \
src/evo/*.cpp \
src/evo/*.h \
src/governance/*.cpp \
src/governance/*.h \
src/llmq/*.cpp \
src/llmq/*.h \
src/masternode/*.cpp \
src/masternode/*.h \
src/privatesend/*.cpp \
src/privatesend/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* build: Remove -I for everything but project root
Remove -I from build system for everything but the project root,
and built-in dependencies.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/Makefile.test.include
* qt: refactor: Use absolute include paths in .ui files
* qt: refactor: Changes to make include paths absolute
This makes all include paths in the GUI absolute.
Many changes are involved as every single source file in
src/qt/ assumes to be able to use relative includes.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/qt/dash.cpp
# src/qt/optionsmodel.cpp
# src/qt/test/rpcnestedtests.cpp
* test: refactor: Use absolute include paths for test data files
* Recommend #include<> syntax in developer notes
* refactor: Include obj/build.h instead of build.h
* END BACKPORT #11651 Remove trailing whitespace causing travis failure
* fix backport 11651
Signed-off-by: Pasta <pasta@dashboost.org>
* More of 11651
* fix blockchain.cpp
Signed-off-by: pasta <pasta@dashboost.org>
* Add missing "qt/" in includes
* Add missing "test/" in includes
* Fix trailing whitespaces
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: MeshCollider <dobsonsa68@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Merge #11117: Prepare for non-Base58 addresses
864cd2787 Move CBitcoinAddress to base58.cpp (Pieter Wuille)
5c8ff0d44 Introduce wrappers around CBitcoinAddress (Pieter Wuille)
Pull request description:
This patch removes the need for the intermediary Base58 type `CBitcoinAddress`, by providing {`Encode`,`Decode`,`IsValid`}`Destination` functions that directly operate on the conversion between `std::string`s and `CTxDestination`.
As a side, it also fixes a number of indentation issues, and removes probably several unnecessary implicit `CTxDestination`<->`CBitcoinAddress` conversions.
This change is far from complete. In follow-ups I'd like to:
* Split off the specific address and key encoding logic from base58.h, and move it to a address.h or so.
* Replace `CTxDestination` with a non-`boost::variant` version (which can be more efficient as `boost::variant` allocates everything on the heap, and remove the need for `boost::get<...>` and `IsValidDestination` calls everywhere).
* Do the same for `CBitcoinSecret`, `CBitcoinExtKey`, and `CBitcoinExtPubKey`.
However, I've tried to keep this patch to be minimally invasive, but still enough to support non-Base58 addresses. Perhaps a smaller patch is possible to hack Bech32 support into `CBitcoinAddress`, but I would consider that a move in the wrong direction.
Tree-SHA512: c2c77ffb57caeadf2429b1c2562ce60e8c7be8aa9f8e51b591f354b6b441162625b2efe14c023a1ae485cf2ed417263afa35c892891dfaa7844e7fbabccab85e
* CBitcoinAddress -> EncodeDestination in providertx.h
Signed-off-by: Pasta <pasta@dashboost.org>
* more CBitcoinAddress -> EncodeDestination in providertx.h
Signed-off-by: Pasta <pasta@dashboost.org>
* more CBitcoinAddress -> EncodeDestination in providertx.h
Signed-off-by: Pasta <pasta@dashboost.org>
* more CBitcoinAddress -> EncodeDestination in providertx.h
Signed-off-by: Pasta <pasta@dashboost.org>
* fix CBitcoinAddress GetKeyID check
Signed-off-by: Pasta <pasta@dashboost.org>
* fix providertx.cpp
Signed-off-by: Pasta <pasta@dashboost.org>
* hopefully fix governance-classes.cpp
Signed-off-by: Pasta <pasta@dashboost.org>
* partially fix governance-validators.cpp, unable to resolve "address.IsScript()"
Signed-off-by: Pasta <pasta@dashboost.org>
* partially fix governance-classes.cpp, unable to resolve "address.IsScript()"
Signed-off-by: Pasta <pasta@dashboost.org>
* fix governance-classes.h
Signed-off-by: Pasta <pasta@dashboost.org>
* DecodeTransaction -> DecodeDestination, fix governance-validators.cpp
Signed-off-by: Pasta <pasta@dashboost.org>
* More fixes for 3294
* Move GetIndexKey into rpc/misc.cpp near getAddressesFromParams
No need to have it in base58.cpp anymore as this is only used in getAddressesFromParams
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: Alexander Block <ablock84@gmail.com>
64fb0ac Declare single-argument (non-converting) constructors "explicit" (practicalswift)
Pull request description:
Declare single-argument (non-converting) constructors `explicit`.
In order to avoid unintended implicit conversions.
For a more thorough discussion, see ["C.46: By default, declare single-argument constructors explicit"](http://isocpp.github.io/CppCoreGuidelines/CppCoreGuidelines#c46-by-default-declare-single-argument-constructors-explicit) in the C++ Core Guidelines (Stroustrup & Sutter).
Tree-SHA512: e0c6922e56b11fa402621a38656d8b1122d16dd8f160e78626385373cf184ac7f26cb4c1851eca47e9b0dbd5e924e39a85c3cbdcb627a05ee3a655ecf5f7a0f1
360b464 Comments: More comments on functions/globals in standard.h. (Jim Posen)
Pull request description:
I was confused about what "data carrier" meant, so I wanted to comment the `fAcceptDatacarrier` and `nMaxDatacarrierBytes` fields specifically. Then I figured I'd add docs for the rest of the functions.
Tree-SHA512: e6d0cfe6f4a2ab52ae76f984b1f5d8de371ae938e7832be8b02517d868f1caea62fec8888c917a2bd3d8ef74025de7f00dc96923fa56436dc6b190626652bf29
remove witness
Signed-off-by: Pasta <pasta@dashboost.org>
5a9b508 [trivial] Add end of namespace comments (practicalswift)
Tree-SHA512: 92b0fcae4d1d3f4da9e97569ae84ef2d6e09625a5815cd0e5f0eb6dd2ecba9852fa85c184c5ae9de5117050330ce995e9867b451fa8cd5512169025990541a2b
Previously only one PUSHDATA was allowed, needlessly limiting
applications such as matching OP_RETURN contents with bloom filters that
operate on a per-PUSHDATA level. Now any combination that passes
IsPushOnly() is allowed, so long as the total size of the scriptPubKey
is less than 42 bytes. (unchanged modulo non-minimal PUSHDATA encodings)
Also, this fixes the odd bug where previously the PUSHDATA could be
replaced by any single opcode, even sigops consuming opcodes such as
CHECKMULTISIG. (20 sigops!)
Previously unlike other transaction types the TX_SCRIPTHASH would not
clear vSolutionsRet, which means that unlike other transaction types if
it was called twice in a row you would get the result of the previous
invocation as well.
Previously an empty script wouldn't be hashed, and CScriptID would be
assigned the incorrect value of 0 instead. This bug can be seen in the
RPC decodescript command:
$ btc decodescript ""
{
"asm" : "",
"type" : "nonstandard",
"p2sh" : "31h1vYVSYuKP6AhS86fbRdMw9XHieotbST"
}
Correct output:
$ btc decodescript ""
{
"asm" : "",
"type" : "nonstandard",
"p2sh" : "3J98t1WpEZ73CNmQviecrnyiWrnqRhWNLy"
}
This allows for a reversal of the current behavior.
This:
CScript foo;
CScriptID bar(foo.GetID());
Becomes:
CScript foo;
CScriptID bar(foo);
This way, CScript is no longer dependent on CScriptID or Hash();
