77a733a99 [tests] Add additional unit tests for -nofoo edge cases (Anthony Towns)
af173c2be [tests] Check GetChainName works with config entries (Anthony Towns)
fa27f1c23 [tests] Add unit tests for ReadConfigStream (Anthony Towns)
087c5d204 ReadConfigStream: assume the stream is good (Anthony Towns)
6d5815aad Separate out ReadConfigStream from ReadConfigFile (Anthony Towns)
834d30341 [tests] Add unit tests for GetChainName (Anthony Towns)
11b6b5b86 Move ChainNameFromCommandLine into ArgsManager and rename to GetChainName (Anthony Towns)
Pull request description:
This does a bit of refactoring of the configuration handling code in order to add additional tests to make adding support for [test]/[regtest] sections in the config file in #11862 easier. Should not cause any behaviour changes.
Tree-SHA512: 8d2ce1449fc180de03414e7e569d1a21ba1e9f6564e13d3faf3961f710adc725fa0d4ab49b89ebd2baa11ea36ac5018377f693a84037d386a8b8697c9d6db3e9
Instead of propagating all sig shares to all LLMQ members, this will now
make all members send their individual sig share to a single member, which
is then responsible for the recovery and propagation of the recovered
signature. This process is repeated by all members every second for another
target/recovering member, until a recovered signature appears.
* scripted-diff: Replace #include "" with #include <> (ryanofsky)
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* scripted-diff: Replace #include "" with #include <> (Dash Specific)
-BEGIN VERIFY SCRIPT-
for f in \
src/bls/*.cpp \
src/bls/*.h \
src/evo/*.cpp \
src/evo/*.h \
src/governance/*.cpp \
src/governance/*.h \
src/llmq/*.cpp \
src/llmq/*.h \
src/masternode/*.cpp \
src/masternode/*.h \
src/privatesend/*.cpp \
src/privatesend/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* build: Remove -I for everything but project root
Remove -I from build system for everything but the project root,
and built-in dependencies.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/Makefile.test.include
* qt: refactor: Use absolute include paths in .ui files
* qt: refactor: Changes to make include paths absolute
This makes all include paths in the GUI absolute.
Many changes are involved as every single source file in
src/qt/ assumes to be able to use relative includes.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/qt/dash.cpp
# src/qt/optionsmodel.cpp
# src/qt/test/rpcnestedtests.cpp
* test: refactor: Use absolute include paths for test data files
* Recommend #include<> syntax in developer notes
* refactor: Include obj/build.h instead of build.h
* END BACKPORT #11651 Remove trailing whitespace causing travis failure
* fix backport 11651
Signed-off-by: Pasta <pasta@dashboost.org>
* More of 11651
* fix blockchain.cpp
Signed-off-by: pasta <pasta@dashboost.org>
* Add missing "qt/" in includes
* Add missing "test/" in includes
* Fix trailing whitespaces
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: MeshCollider <dobsonsa68@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
fbf327b Minimal code changes to allow msvc compilation. (Aaron Clauson)
Pull request description:
These changes are required to allow the Bitcoin source to build with Microsoft's C++ compiler (#11562 is also required).
I looked around for a better place for the typedef of ssize_t which is in random.h. The best candidate looks like src/compat.h but I figured including that header in random.h is a bigger change than the typedef. Note that the same typedef is in at least two other places including the OpenSSL and Berkeley DB headers so some of the Bitcoin code already picks it up.
Tree-SHA512: aa6cc6283015e08ab074641f9abdc116c4dc58574dc90f75e7a5af4cc82946d3052370e5cbe855fb6180c00f8dc66997d3724ff0412e4b7417e51b6602154825
* add new quorum type LLMQ_EVONET
* add params for new quorum type LLMQ_EVONET
* add LLMQ_EVONET to devnet llmqs
* allow modifying of LLMQ_EVONET params on startup
* rename LLMQ_EVONET to LLMQ_DEVNET
* Update src/chainparams.cpp
Co-Authored-By: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
* Update src/chainparams.cpp
Co-authored-by: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Refactor PS a bit and make it so that the expected flow is for a mixing tx to time out, however there is in effect no max on the number of participants.
Signed-off-by: Pasta <pasta@dashboost.org>
* revert maxParticipants bump, to be bumped with next breaking change
Signed-off-by: Pasta <pasta@dashboost.org>
* revert min participants to 3 on testnet / devnet, regtest at 2
Signed-off-by: Pasta <pasta@dashboost.org>
* nit extraneous
Co-Authored-By: thephez <thephez@users.noreply.github.com>
Co-authored-by: thephez <thephez@users.noreply.github.com>
2b839ab Update chainparams comment for more info on service bits per dnsseed (Matt Corallo)
62e7642 Fall back to oneshot for DNS Seeds which don't support filtering. (Matt Corallo)
51ae766 Use GetDesireableServiceFlags in static seeds, document this. (Matt Corallo)
fb6f6b1 bluematt's testnet-seed now supports x9 (and is just a static list) (Matt Corallo)
Pull request description:
4440710 broke inserting entries into addrman from dnsseeds which
did not support service bits, as well as static seeds. Static seeds
were already being filtered by UA for 0.13.1+ (ie NODE_WITNESS), so
simply changing the default service bits to include NODE_WITNESS
(and updating docs appropriately) is sufficient. For DNS Seeds, not
supporting NODE_WITNESS is no longer useful, so instead use
non-filtering seeds as oneshot hosts irrespective of named proxy.
I've set my testnet-seed to also support x9, though because it is simply a static host, it may be useful to leave the support off so that it is used as a oneshot to get addresses from a live node instead. I'm fine with either.
Tree-SHA512: 3f17d4d2b0b84d876981c962d2b44cb0c8f95f52c56a48c6b35fd882f6d7a40805f320ec452985a1c0b34aebddb1922709156c3ceccd1b9f8363fd7cb537d21d
* Rename LLMQ_5_60 to LLMQ_TEST
* Introduce -llmqtestparams which allows to modify LLMQ_TEST on regtest
Also add support in DashTestFramework
* Use parameters size=3, threshold=2 as default for LLMQ_TEST
And fall back to the old parameters where necessary
* Wait for all contributions, even when one member is lying
Otherwise we might end up continuing too fast, which would fail the DKG.
* Update src/chainparams.cpp
Co-Authored-By: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Drop (test.)dnsseed.masternode.io
* makeseeds.py
mainnet 1185193, testnet 225964
* generate-seeds.py
* Update tor.md with live onion nodes
All old nodes are down
c1be285 chainparams: make supported service bits option explicit (Cory Fields)
d5c7c1c net: use an internal address for fixed seeds (Cory Fields)
6cdc488 net: switch to dummy internal ip for dns seed source (Cory Fields)
6d0bd5b net: do not allow resolving to an internal address (Cory Fields)
7f31762 net: add an internal subnet for representing unresolved hostnames (Cory Fields)
Tree-SHA512: 9bf1042bef546ac3ef0e0d3a9a5555eb21628ff2674a0cf8c6367194b22bfdab477adf452c0e7c56f44e0fb37debc5e14bdb623452e076fb9c492c7702601d7a
* Remove ppszTypeName from protocol.cpp and reimplement GetCommand
This removes the need to carefully maintain ppszTypeName, which required
correct order and also did not allow to permanently remove old message
types.
To get the command name for an INV type, GetCommandInternal uses a switch
which needs to be maintained from now on.
The way this is implemented also resembles the way it is implemented in
Bitcoin today, but it's not identical. The original PR that introduced the
switch case in Bitcoin was part of the Segwit changes and thus never got
backported. I decided to implement it in a slightly different way that
avoids throwing exceptions when an unknown INV type is encountered.
IsKnownType will now also leverage GetCommandInternal() to figure out if
the INV type is known locally. This has the side effect of old/legacy
message types to return false from now on. We will depend on this side
effect in later commits when we remove legacy InstantSend code.
* Stop handling/relaying legacy IX messages
When we receive an IX message, we simply treat it as a regular TX and relay
it as such.
We'll however still request IX messages when they are announced to us. We
can't simply revert to requesting TX messages in this case as it might
result in the other peer not answering due to the TX not being in mapRelay
yet. We should at some point in the future completely drop handling of IX
messages instead.
* Remove IsNewInstantSendEnabled() and only use IsInstantSendEnabled()
* Remove legacy InstantSend from GUI
* Remove InstantSend from Bitcoin/Dash URIs
* Remove legacy InstantSend from RPC commands
* Remove legacy InstantSend from wallet
* Remove legacy instantsend.h include
* Remove legacy InstantSend from validation code
* Completely remove remaining legacy InstantSend code
* Remove now unused spork
* Fix InstantSend related test failures
* Remove now obsolete auto IS tests
* Make spork2 and spork3 disabled by default
This should have no influence on mainnet as these sporks are actually set
there. This will however affect regtest, which shouldn't have LLMQ based
InstantSend enabled by default.
* Remove instantsend tests from dip3-deterministicmns.py
These were only testing legacy InstantSend
* Fix .QCheckBox#checkUsePrivateSend styling a bit
* s/TXLEGACYLOCKREQUEST/LEGACYTXLOCKREQUEST/
* Revert "verified via InstantSend" back to "verified via LLMQ based InstantSend"
* Use cmd == nullptr instead of !cmd
* Remove last parameter from AvailableCoins call
This was for fUseInstantSend which is not present anymore since rebase
3fb81a8 Use list initialization (C++11) for maps/vectors instead of boost::assign::map_list_of/list_of (practicalswift)
Tree-SHA512: 63a9ac9ec5799472943dce1cd92a4b14e7f1fe12758a5fc4b1efceaf2c85a4ba71dad5ccc50813527f18b192e7714c076e2478ecd6ca0d452b24e88416f872f7
c1082a7 Chainparams: Use the factory for pow tests (Jorge Timón)
2351a06 Chainparams: Get rid of CChainParams& Params(std::string) (Jorge Timón)
f87f362 Chainparams: Use a regular factory for creating chainparams (Jorge Timón)
Tree-SHA512: 359c8a2a1bc9d02db7856d02810240ada28048ac088f878b575597a7255cdb0ffdd1a647085ee67a34c6a7e7ed9e6cfdb61240cf6e75139619b640dbb096072c
* Bump nMinimumChainWork and defaultAssumeValid for mainnet
Signed-off-by: Pasta <Pasta@dash.org>
add back 0x
Signed-off-by: Pasta <Pasta@dash.org>
* Bump nMinimumChainWork and defaultAssumeValid for testnet
Signed-off-by: Pasta <Pasta@dash.org>
add back 0x 2nd time
Signed-off-by: Pasta <Pasta@dash.org>
* Add a checkpoint for 0.14
Signed-off-by: Pasta <Pasta@dash.org>
* add testnet checkpoint 0.14
Signed-off-by: Pasta <Pasta@dash.org>
* update mainnet ChainTxData
Signed-off-by: Pasta <Pasta@dash.org>
formatting fix mainnet chaintxdata
Signed-off-by: Pasta <Pasta@dash.org>
update mainnet ChainTxData to specific block
Signed-off-by: Pasta <Pasta@dash.org>
* update testnet chainTxData
Signed-off-by: Pasta <Pasta@dash.org>
update testnet ChainTxData to specific block
Signed-off-by: Pasta <Pasta@dash.org>
And for llmq5_60, set it to 3 instead of 24 (which was incorrect from the
beginning).
Increasing all LLMQs "keepOldConnections" by one is required because we
don't use the tip when scanning active quorums, but a block that is 8 blocks
in the past. This however means that we need to keep connections for one
additional quorum alive.
This fixes an issue with signing sessions randomly failing with timeouts.
* Trivial: vout->txout
* Re-use SetHexStr in few more places
* Tweak log output
* fix v13 release notes links
* Drop no longer used stuff
* Few more trivial fixes
* Adjust few rpc help strings
* Apply review suggestions
* Harden DIP3 activation height
Also drop all related but no longer used parts.
* Pass current block index to GetCommitmentsFromBlock
* Allow to change dip3 activation height for tests
And fix them.
On testnet it's quite usual to have multiple MNs on the same IP. Now that
we have LLMQs and DKGs which require deterministic intra quorum connections,
we must allow them to connect to each other even if the IPs are shared very
often.
* Require only 3 out of 5 signatures for old InstantSend in regtest mode
* Use LLMQs of size 5 with threshold of 3 for regtest
* Fix wrong check for out-of-range bits in CFixedBitSet
* Reduce number of masternodes in masternode/LLMQ tests
* Add missing \n to LogPrintf call
* Use correct indexes for isolated/receiver/sender nodes
The way it was before resulted in nodes 1-3 being unused and 6-8 being used
for these 3 special nodes even though these are masternodes.
* Avoid stopping/starting isolated node in p2p-instantsend.py
It's enough to disable networking for this node.
