## Issue being fixed or feature implemented
It splits from https://github.com/dashpay/dash/pull/5150/ by
@PastaPastaPasta request.
## What was done?
See commits
## How Has This Been Tested?
Run unit/functional tests
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
Many usages of `CBLS{Signature,PrivateKey,PublicKey}` assume using
global variable, even if can be specified explicitly.
Some of these usages have been deglobalized in this PR.
Some prior improvements and fixes are here:
[#5403](https://github.com/dashpay/dash/pull/5403)
## What was done?
- Refactored the uses of global variable of `bls_legacy_scheme` from
`SetHex`, `SetByteVector`, some rpc calls.
- Removed flag `checkMalleable` to simplify code because it's always
`true`.
- Removed dependency from `txmempool.h` on `bls.h` to speed up
compilation.
## How Has This Been Tested?
Run unit/functional tests.
## Breaking Changes
No breaking changes assumed. But in theory behaviour of some RPC can be
more explicit and predictable.
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
Disabled or non-enforced Chainlocks does not mean you can safely mine
non-locked txes, you could end up mining a block that is going to be
rejected by everyone else if a conflicting tx (missing on your node)
would be IS-locked. I can't find any reason why we have this besides "if
Chainlocks are disabled then smth is wrong so let them all be mined" but
we have spork_2 and spork_3 to control IS behaviour and we check them in
`IsTxSafeForMining` already, that would be a much more straightforward
way to deal with a potential issue.
Noticed this while reviewing #5150 and also while testing v19.2 during
recent testnet v19 re-fork.
## What was done?
Drop this check, adjust tests
## How Has This Been Tested?
Run tests locally
## Breaking Changes
Not quote breaking changes but a change in behaviour: with CLs disabled
it will now take 10 minutes for non-locked txes to be mined, same as
when CLs are enabled.
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
## Issue being fixed or feature implemented
Some conditions won't trigger when reorging exactly from the forkpoint
## What was done?
pls see individual commits, tl;dr: you can't get correct results with
`GetAncestor` cause the answer is in the future
## How Has This Been Tested?
reorg to 850000 and back on testnet
```
invalidateblock 0000003eddb94218e7a3f41b2ac6e26143f8a748b50cd26e86bdbbab9ebe50aa
reconsiderblock 0000003eddb94218e7a3f41b2ac6e26143f8a748b50cd26e86bdbbab9ebe50aa
```
this fails on develop and work with this patch
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
## Issue being fixed or feature implemented
same as #5392, alternative solution
~based on #5402 atm, will rebase later~
## What was done?
pls see individual commits
## How Has This Been Tested?
reorg mainnet around forkpoint with a patched client (to allow low
difficulty), run tests
## Breaking Changes
Another evodb migration is required. Going back to an older version or
migrating after the fork requires reindexing.
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
## Issue being fixed or feature implemented
Many objects created and functions called by passing `const
std::unique_ptr<Obj>& obj` instead directly passing `Obj& obj`
In some cases it is indeed needed, but in most cases it is just extra
complexity that is better to avoid.
Motivation:
- providing reference to object instead `unique_ptr` is giving warranty
that there's no `nullptr` and no need to keep it in mind
- value inside unique_ptr by reference can be changed externally and
instead `nullptr` it can turn to real object later (or in opposite)
- code is shorter but cleaner
Based on that this refactoring is useful as it reduces mental load when
reading or writing code.
`std::unique` should be used ONLY for owning object, but not for passing
it everywhere.
## What was done?
Replaced most of usages `std::unique_ptr<Obj>& obj` to `Obj& obj`.
Btw, in several cases implementation assumes that object can be nullptr
and replacement to reference is not possible.
Even using raw pointer is not possible, because the empty
std::unique_ptr can be initialized later somewhere in code.
For example, in `src/init.cpp` there's called `PeerManager::make` and
pass unique_ptr to the `node.llmq_ctx` that would be initialized way
later.
That is out of scope this PR.
List of cases, where reference to `std::unique_ptr` stayed as they are:
- `std::unique_ptr<LLMQContext>& llmq_ctx` in `PeerManagerImpl`,
`PeerManager` and `CDSNotificationInterface`
- `std::unique_ptr<CDeterministicMNManager>& dmnman` in
`CDSNotificationInterface`
Also `CChainState` have 3 references to `unique_ptr` that can't be
replaced too:
- `std::unique_ptr<llmq::CChainLocksHandler>& m_clhandler;`
- `std::unique_ptr<llmq::CInstantSendManager>& m_isman;`
- `std::unique_ptr<llmq::CQuorumBlockProcessor>&
m_quorum_block_processor;`
## How Has This Been Tested?
Run unit/functional tests.
## Breaking Changes
No breaking changes, all of these changes - are internal APIs for Dash
Core developers only.
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
## Issue being fixed or feature implemented
Currently, Chainlocks are either enabled or disabled. This PR adds a
third state: enabled but we will not sign new ones.
Should probably backport this to v19.x
## What was done?
Spork state != 0 but active will now result in chain locks being
enforced but not created.
## How Has This Been Tested?
## Breaking Changes
None
## Checklist:
_Go over all the following points, and put an `x` in all the boxes that
apply._
- [ ] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
10efc0487c442bccb0e4a9ac29452af1592a3cf2 Templatize ValidationState instead of subclassing (Jeffrey Czyz)
10e85d4adc9b7dbbda63e00195e0a962f51e4d2c Remove ValidationState's constructor (Jeffrey Czyz)
0aed17ef2892478c28cd660e53223c6dd1dc0187 Refactor FormatStateMessage into ValidationState (Jeffrey Czyz)
Pull request description:
This removes boilerplate code in the subclasses which otherwise only
differ by the result type.
The subclassing was introduced in a27a295.
ACKs for top commit:
MarcoFalke:
ACK 10efc0487c442bccb0e4a9ac29452af1592a3cf2 🐱
ajtowns:
ACK 10efc0487c442bccb0e4a9ac29452af1592a3cf2 -- looks good to me
jonatack:
ACK 10efc048 code review, build/tests green, nice cleanup
Tree-SHA512: 765dd52dde7d49b9a5c6d99d97c96f4492673e2aed0b0604faa88db0308fa4500a26bf755cca0b896be283874096c215932e1110a2d01dc012cd36a5fce58a42
e09c701e0110350f78366fb837308c086b6503c0 scripted-diff: Bump copyright of files changed in 2020 (MarcoFalke)
6cbe6209646db8914b87bf6edbc18c6031a16f1e scripted-diff: Replace CCriticalSection with RecursiveMutex (MarcoFalke)
Pull request description:
`RecursiveMutex` better clarifies that the mutex is recursive, see also the standard library naming: https://en.cppreference.com/w/cpp/thread/recursive_mutex
For that reason, and to avoid different people asking me the same question repeatedly (e.g. https://github.com/bitcoin/bitcoin/pull/15932#pullrequestreview-339175124 ), remove the outdated alias `CCriticalSection` with a scripted-diff
## Issue being fixed or feature implemented
We use `pQuorumBaseBlockIndex` name when we shouldn't and we don't check
that quorum types and block indexes provided as input params in llmq
utils satisfy our requirements. This is kind of ok-ish as long as we use
these functions appropriately but it's better to make things clearer and
to have actual checks imo.
noticed this while reviewing #5366
## What was done?
Rename `pQuorumBaseBlockIndex` to `pCycleQuorumBaseBlockIndex`/`pindex`
in a few places. Check that quorum types and block indexes have expected
values.
## How Has This Been Tested?
run tests locally
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
## Issue being fixed or feature implemented
Implementation of Randomness Beacon Part 2.
This PR is the next step of #5262.
Starting from v20 activation fork, members for quorums are sorted using
(if available) the best CL signature found in Coinbase.
If no CL signature is present yet, then the usual way is used (By using
Blockhash instead)
## What was done?
## How Has This Been Tested?
Test `feature_llmq_rotation.py` was updated to cover both rotated and
non-rotated quorums.
2 quorums are mined first to ensure Chainlock are working earlier.
Then dip_24 activation is replaced by v20 activation.
The only direct way to test this change is to make sure that all
expected quorums after v20 activation are properly formed.
Note: A `wait_for_chainlocked_block_all_nodes` is called between every
rotation cycle to ensure that Coinbase will use a different Chainlock
signature.
## Breaking Changes
Yes, quorum members will be calculated differently.
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
## Issue being fixed or feature implemented
We had forgotten to harden dip20 and dip24 activation
## What was done?
Hardened dip20 and dip24 activation
## How Has This Been Tested?
Hasn't yet; should do an assumevalid=0 reindex
## Breaking Changes
Hopefully none
## Checklist:
_Go over all the following points, and put an `x` in all the boxes that
apply._
- [ ] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [ ] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
---------
Co-authored-by: Konstantin Akimov <knstqq@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
## Issue being fixed or feature implemented
`cs_map_quorums` was introduced to protect `mapQuorumsCache` only. We
shouldn't hold it for too long or require it to be held in
`BuildQuorumFromCommitment`.
## What was done?
limit the scope of `cs_map_quorums`
## How Has This Been Tested?
build and run tests locally and in gitlab ci
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
## Issue being fixed or feature implemented
## What was done?
- Bumped version of `CbTx`. Added fields `bestCLHeightDiff`,
`bestCLSignature`
- Miner starting from v20 fork, includes best CL signature in `CbTx` (if
available) or null signature.
- All nodes should verify included CL signature before accepting the
block.
## How Has This Been Tested?
Basically, activated v20 on in the beginning of
`feature_llmq_chainlocks.py`
## Breaking Changes
Yes, new version of CbTx
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Invalid number of minimum members in comments for LLMQ_25_67
## Issue being fixed or feature implemented
Invalid number of minimum members in comments for LLMQ_25_67
## What was done?
- Replaced `67` with `17`
## How Has This Been Tested?
None
## Breaking Changes
None
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
## Issue being fixed or feature implemented
This refactoring is a follow-up changes to backport bitcoin#17164 (PR
#5314)
These changes are reduce difference in implementation for our code and
bitcoin's
## What was done?
Removed a flag m_block_relay_peer. Instead I call IsAddrRelayPeer() that
has same information now.
It changes logic introduced in #4888 due to dash-specific code.
## How Has This Been Tested?
Run unit/functional tests.
## Breaking Changes
No breaking changes
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone
3004d5a12d09d94bfc4dee2a8e8f2291996a4aaf [validation] Remove fMissingInputs from AcceptToMemoryPool() (John Newbery)
c428622a5bb1e37b2e6ab2c52791ac05d9271238 [validation] Remove unused first_invalid parameter from ProcessNewBlockHeaders() (John Newbery)
7204c6434b944f6ad51b3c895837729d3aa56eea [validation] Remove useless ret parameter from Invalid() (John Newbery)
1a37de4b3174d19a6d8691ae07e92b32fdfaef11 [validation] Remove error() calls from Invalid() calls (John Newbery)
067981e49246822421a7bcc720491427e1dba8a3 [validation] Tidy Up ValidationResult class (John Newbery)
a27a2957ed9afbe5a96caa5f0f4cbec730d27460 [validation] Add CValidationState subclasses (John Newbery)
Pull request description:
Carries out some remaining tidy-ups remaining after PR 15141:
- split ValidationState into TxValidationState and BlockValidationState (commit from ajtowns)
- various minor code style tidy-ups to the ValidationState class
- remove the useless `ret` parameter from `ValidationState::Invalid()`
- remove the now unused `first_invalid` parameter from `ProcessNewBlockHeaders()`
- remove the `fMissingInputs` parameter from `AcceptToMemoryPool()`, and deal with missing inputs the same way as other errors by using the `TxValidationState` object.
Tip for reviewers (thanks ryanofsky!): The first commit ("[validation] Add CValidationState subclasses" ) is huge and can be easier to start reviewing if you revert the rote, mechanical changes:
Substitute the commit hash of commit "[validation] Add CValidationState subclasses" for <CommitHash> in the commands below.
```sh
git checkout <CommitHash>
git grep -l ValidationState | xargs sed -i 's/BlockValidationState\|TxValidationState/CValidationState/g'
git grep -l ValidationResult | xargs sed -i 's/BlockValidationResult\|TxValidationResult/ValidationInvalidReason/g'
git grep -l MaybePunish | xargs sed -i 's/MaybePunishNode\(ForBlock\|ForTx\)/MaybePunishNode/g'
git diff HEAD^
```
After that it's possible to easily see the mechanical changes with:
```sh
git log -p -n1 -U0 --word-diff-regex=. <CommitHash>
```
ACKs for top commit:
laanwj:
ACK 3004d5a12d09d94bfc4dee2a8e8f2291996a4aaf
amitiuttarwar:
code review ACK 3004d5a12d09d94bfc4dee2a8e8f2291996a4aaf. Also built & ran tests locally.
fjahr:
Code review ACK 3004d5a12d09d94bfc4dee2a8e8f2291996a4aaf . Only nit style change and pure virtual destructor added since my last review.
ryanofsky:
Code review ACK 3004d5a12d09d94bfc4dee2a8e8f2291996a4aaf. Just whitespace change and pure virtual destructor added since last review.
Tree-SHA512: 511de1fb380a18bec1944ea82b513b6192df632ee08bb16344a2df3c40811a88f3872f04df24bc93a41643c96c48f376a04551840fd804a961490d6c702c3d36
9075d13153ce06cd59a45644831ecc43126e1e82 [docs] Add release notes for removal of REJECT reasons (John Newbery)
04a2f326ec0f06fb4fce1c4f93500752f05dede8 [validation] Fix REJECT message comments (John Newbery)
e9d5a59e34ff2d538d8f5315efd9908bf24d0fdc [validation] Remove REJECT code from CValidationState (John Newbery)
0053e16714323c1694c834fdca74f064a1a33529 [logging] Don't log REJECT code when transaction is rejected (John Newbery)
a1a07cfe99fc8cee30ba5976dc36b47b1f6532ab [validation] Fix peer punishment for bad blocks (John Newbery)
Pull request description:
We no longer send BIP 61 REJECT messages, so there's no need to set
a REJECT code in the CValidationState object.
Note that there is a minor bug fix in p2p behaviour here. Because the
call to `MaybePunishNode()` in `PeerLogicValidation::BlockChecked()` only
previously happened if the REJECT code was > 0 and < `REJECT_INTERNAL`,
then there are cases were `MaybePunishNode()` can get called where it
wasn't previously:
- when `AcceptBlockHeader()` fails with `CACHED_INVALID`.
- when `AcceptBlockHeader()` fails with `BLOCK_MISSING_PREV`.
Note that `BlockChecked()` cannot fail with an 'internal' reject code. The
only internal reject code was `REJECT_HIGHFEE`, which was only set in
ATMP.
This reverts a minor bug introduced in 5d08c9c579.
ACKs for top commit:
ariard:
ACK 9075d13, changes since last reviewed are splitting them in separate commits to ease understanding and fix nits
fjahr:
ACK 9075d13153ce06cd59a45644831ecc43126e1e82, confirmed diff to last review was fixing nits in docs/comments.
ryanofsky:
Code review ACK 9075d13153ce06cd59a45644831ecc43126e1e82. Only changes since last review are splitting the main commit and updating comments
Tree-SHA512: 58e8a1a4d4e6f156da5d29fb6ad6a62fc9c594bbfc6432b3252e962d0e9e10149bf3035185dc5320c46c09f3e49662bc2973ec759679c0f3412232087cb8a3a7
## Issue being fixed or feature implemented
Converts some CCriticalSections with Mutexes; other minor refactoring
in
0fce09d1f0
see before
<img width="771" alt="image"
src="https://user-images.githubusercontent.com/6443210/225969163-bb4cee62-3e6a-4224-980a-11b2e0024a60.png">
and after
<img width="766" alt="image"
src="https://user-images.githubusercontent.com/6443210/225969245-e8afcbf6-c112-40c4-9504-82830b005a53.png">
## What was done?
## How Has This Been Tested?
## Breaking Changes
None
## Checklist:
- [ ] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
## What was done?
Added v20 BIP9 style fork structure along with utility functions.
Since several features coming depending on that fork status, we needed
to group them into one
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
should fix "qdata: Already received" discouraging issue
the root of the issue is that we remove expired requests on
UpdatedBlockTip which is too late sometimes.
## What was done?
replacing expired requests with a new one in RequestQuorumData kind of
does the same (drops the expired request) but without waiting for
UpdatedBlockTip
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [ ] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
add a bias to IsExpired to avoid potential timing issues where nodeA thinks it's been 300 seconds but nodeB only thinks it's been 295 for some reason
## What was done?
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [ ] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
Currently, we store internally the nodes that already requested
`QGETDATA` for the same Quorum.
If data for the same Quorum is requested twice from the same `proRegTx`,
then the requester is P2P misbehaved.
## What was done?
Some data like `VerificationVector` and `EncryptedContributions` are not
instantly available.
This PR does not misbehave nodes for requesting data that weren't
available when asked.
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
## What was done?
Added logs with requested parameters (`llmqType`, `quorumHash`,
`proRegTx`) when sending `qgetdata` for better troubleshooting.
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
This allows us to have a bit more granular control over GetLLMQ results,
removes code duplication and also optimises things a tiny bit by
replacing "HasLLMQ + GetLLMQParams" calls with simply "GetLLMQParams".
## What was done?
Use `optional` in `GetLLMQ`, drop `HasLLMQ`.
## How Has This Been Tested?
run tests, reindex on testnet/mainnet
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
## What was done?
## How Has This Been Tested?
## Breaking Changes
After the DIP24 fork, instant locks will still be served by
`llmq_test_instantsend`, since no `llmq_test_dip0024` will be formed
with less than 4 nodes.
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
## What was done?
- Added new LLMQ type `llmq_25_67`
- The above LLMQ is added only for Testnet and it is activated with v19
fork.
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: pasta <pasta@dashboost.org>
## Issue being fixed or feature implemented
Avoid redundant calls to GetLLMQParams
## What was done?
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
Avoid lots of static_cast's from enums to underlying types. Communicate
intention better
## What was done?
implement c++23 inspired ToUnderlying, then see std::to_underlying and
https://en.cppreference.com/w/cpp/types/underlying_type; Then, we use
this instead of static_casts for enums -> underlying type
## How Has This Been Tested?
make check
## Breaking Changes
None
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: Konstantin Akimov <knstqq@gmail.com>
## Issue being fixed or feature implemented
`develop` can't sync on mainnet and testnet atm because platform quorums
are already active there but we skip non-hpms nodes when calculating
quorums.
## What was done?
Fixed the code to respect `IsV19Active`. Also dropped
`IsLLMQTypeHPMNOnly` cause it's not used anywhere else and it just makes
things more confusing imo.
## How Has This Been Tested?
Can successfully sync on mainnet/testnet
## Breaking Changes
n/a, fixes breaking changes introduced earlier :)
## Checklist:
<!--- Go over all the following points, and put an `x` in all the boxes
that apply. -->
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
This refactoring helps to make code more specific and clear.
There's using syntax feature from modern C++ such as 'enum class',
structure bindings in loops, declaration variables inside if/switch
statements, etc.
## What was done?
This PR is based on @PastaPastaPasta 's PR
https://github.com/dashpay/dash/pull/4472
There excluded changes related to using std::optional. Let's decide
firstly about `Result` class: https://github.com/dashpay/dash/pull/5109
## How Has This Been Tested?
Run unit/functional tests
## Breaking Changes
No breaking changes
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: Pasta <pasta@dashboost.org>
## Issue being fixed or feature implemented
Currently, by default in devnet, the LLMQ set for Platform is
`LLMQ_100_67`.
Obviously this is too big for usual devnets, therefore the new
`LLMQ_DEVNET_PLATFORM` is created (size 12, threshold 67%).
`LLMQ_100_67` is still the default one: added possibility to overwrite
it by passing argument `-llmqplatform` (devnets only)
## What was done?
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
## What was done?
As discussed with Platform team, threshold for `llmq_test_platform`
needed to be 67%. Therefore, the size went from 4 members to 3 (while
keeping threshold to 2)
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
fafb381af8279b2d2ca768df0bf68d7eb036a2f9 Remove mempool global (MarcoFalke)
fa0359c5b30730744aa8a7cd9ffab79ded91041f Remove mempool global from p2p (MarcoFalke)
eeee1104d78eb59a582ee1709ff4ac2c33ee1190 Remove mempool global from init (MarcoFalke)
Pull request description:
This refactor unlocks some nice potential features, such as, but not limited to:
* Removing the fee estimates global (would avoid slightly fragile workarounds such as #18766)
* Making the mempool optional for a "blocksonly" operation mode
Even absent those features, the new code without the global should be easier to maintain, read and write tests for.
ACKs for top commit:
jnewbery:
utACK fafb381af8279b2d2ca768df0bf68d7eb036a2f9
hebasto:
ACK fafb381af8279b2d2ca768df0bf68d7eb036a2f9, I have reviewed the code and it looks OK, I agree it can be merged.
darosior:
ACK fafb381af8279b2d2ca768df0bf68d7eb036a2f9
Tree-SHA512: a2e696dc377e2e81eaf9c389e6d13dde4a48d81f3538df88f4da502d3012dd61078495140ab5a5854f360a06249fe0e1f6a094c4e006d8b5cc2552a946becf26
e57980b4738c10344baf136de3e050a3cb958ca5 [mempool] Remove NotifyEntryAdded and NotifyEntryRemoved callbacks (John Newbery)
2dd561f36124972d2364f941de9c3417c65f05b6 [validation] Remove pool member from ConnectTrace (John Newbery)
969b65f3f527631ede1a31c7855151e5c5d91f8f [validation] Remove NotifyEntryRemoved callback from ConnectTrace (John Newbery)
5613f9842b4000fed088b8cf7b99674c328d15e1 [validation] Remove conflictedTxs from PerBlockConnectTrace (John Newbery)
cdb893443cc16edf974f099b8485e04b3db1b1d7 [validation interface] Remove vtxConflicted from BlockConnected (John Newbery)
1168394d759b13af68acec6d5bfa04aaa24561f8 [wallet] Notify conflicted transactions in TransactionRemovedFromMempool (John Newbery)
Pull request description:
These boost signals were added in #9371, before we had a `TransactionRemovedFromMempool` method in the validation interface. The `NotifyEntryAdded` callback was used by validation to build a vector of conflicted transactions when connecting a block, which the wallet was notified of in the `BlockConnected` CValidationInterface callback.
Now that we have a `TransactionRemovedFromMempool` callback, we can fire that signal directly from the mempool for conflicted transactions.
Note that #9371 was implemented to ensure `-walletnotify` events were fired for these conflicted transaction. We inadvertently stopped sending these notifications in #16624 (Sep 2019 commit 7e89994). We should probably fix that, but in a different PR.
ACKs for top commit:
jonatack:
Re-ACK e57980b
ryanofsky:
Code review ACK e57980b4738c10344baf136de3e050a3cb958ca5, no code changes since previous review, but helpful new code comments have been added and the PR description is now more clear about where the old code came from
Tree-SHA512: 3bdbaf1ef2731e788462d4756e69c42a1efdcf168691ce1bbfdaa4b7b55ac3c5b1fd4ab7b90bcdec653703600501b4224d252cfc086aef28f9ce0da3b0563a69
## Issue being fixed or feature implemented
## What was done?
Implementation of 4k collateral HPMN.
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: thephez <thephez@users.noreply.github.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: pasta <pasta@dashboost.org>
Co-authored-by: PastaPastaPasta <6443210+pastapastapasta@users.noreply.github.com>
Co-authored-by: UdjinM6 <1935069+Udjinm6@users.noreply.github.com>
Co-authored-by: Konstantin Akimov <545784+knst@users.noreply.github.com>
## Issue being fixed or feature implemented
Build on linux with clang produce a lot of warnings.
Some of them are fixed in this PR.
## What was done?
Fixed several types of warnings:
- order of member initialization in constructors
- mixing signed/unsigned wariables
- moved static functions from header to cpp file
- other fixes
## How Has This Been Tested?
Set up clang build on Linux + run build + unit/functional tests.
## Breaking Changes
Should not be breaking changes
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have assigned this pull request to a milestone
With 18.2, block
`0000000000000044356e582f9748f9baf084e5b7946e6386b32620d540830fda` is
marked invalid with `bad-qc-invalid`.
## Issue being fixed or feature implemented
While the 19 isn’t active -> Calculate rotation members based on 18.1
code
Once 19 active -> Calculate rotation members based on 18.2 code
## What was done?
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
<!--
*** Please remove the following help text before submitting: ***
Provide a general summary of your changes in the Title above
Pull requests without a rationale and clear improvement may be closed
immediately.
Please provide clear motivation for your patch and explain how it
improves
Dash Core user experience or Dash Core developer experience
significantly:
* Any test improvements or new tests that improve coverage are always
welcome.
* All other changes should have accompanying unit tests (see
`src/test/`) or
functional tests (see `test/`). Contributors should note which tests
cover
modified code. If no tests exist for a region of modified code, new
tests
should accompany the change.
* Bug fixes are most welcome when they come with steps to reproduce or
an
explanation of the potential issue as well as reasoning for the way the
bug
was fixed.
* Features are welcome, but might be rejected due to design or scope
issues.
If a feature is based on a lot of dependencies, contributors should
first
consider building the system outside of Dash Core, if possible.
-->
## Issue being fixed or feature implemented
<!--- Why is this change required? What problem does it solve? -->
<!--- If it fixes an open issue, please link to the issue here. -->
This fixes an issue where qfcommit messages can be replayed from the
past, then are validated and propagated to other nodes. This patch
changes it so that old qfcommits are not relayed.
## What was done?
<!--- Describe your changes in detail -->
## How Has This Been Tested?
<!--- Please describe in detail how you tested your changes. -->
<!--- Include details of your testing environment, and the tests you ran
to -->
<!--- see how your change affects other areas of the code, etc. -->
Deployed to a node, and ensured that the log messages are shown.
## Breaking Changes
<!--- Please describe any breaking changes your code introduces -->
## Checklist:
<!--- Go over all the following points, and put an `x` in all the boxes
that apply. -->
- [ ] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [ ] I have assigned this pull request to a milestone
<!--
*** Please remove the following help text before submitting: ***
Provide a general summary of your changes in the Title above
Pull requests without a rationale and clear improvement may be closed
immediately.
Please provide clear motivation for your patch and explain how it
improves
Dash Core user experience or Dash Core developer experience
significantly:
* Any test improvements or new tests that improve coverage are always
welcome.
* All other changes should have accompanying unit tests (see
`src/test/`) or
functional tests (see `test/`). Contributors should note which tests
cover
modified code. If no tests exist for a region of modified code, new
tests
should accompany the change.
* Bug fixes are most welcome when they come with steps to reproduce or
an
explanation of the potential issue as well as reasoning for the way the
bug
was fixed.
* Features are welcome, but might be rejected due to design or scope
issues.
If a feature is based on a lot of dependencies, contributors should
first
consider building the system outside of Dash Core, if possible.
-->
## Issue being fixed or feature implemented
<!--- Why is this change required? What problem does it solve? -->
<!--- If it fixes an open issue, please link to the issue here. -->
minimizing global uses
## What was done?
<!--- Describe your changes in detail -->
Started the deglobalization, a future PR should be done to continue this
deglobalization
## How Has This Been Tested?
<!--- Please describe in detail how you tested your changes. -->
<!--- Include details of your testing environment, and the tests you ran
to -->
<!--- see how your change affects other areas of the code, etc. -->
## Breaking Changes
<!--- Please describe any breaking changes your code introduces -->
none
## Checklist:
<!--- Go over all the following points, and put an `x` in all the boxes
that apply. -->
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
<!--
*** Please remove the following help text before submitting: ***
Provide a general summary of your changes in the Title above
Pull requests without a rationale and clear improvement may be closed
immediately.
Please provide clear motivation for your patch and explain how it
improves
Dash Core user experience or Dash Core developer experience
significantly:
* Any test improvements or new tests that improve coverage are always
welcome.
* All other changes should have accompanying unit tests (see
`src/test/`) or
functional tests (see `test/`). Contributors should note which tests
cover
modified code. If no tests exist for a region of modified code, new
tests
should accompany the change.
* Bug fixes are most welcome when they come with steps to reproduce or
an
explanation of the potential issue as well as reasoning for the way the
bug
was fixed.
* Features are welcome, but might be rejected due to design or scope
issues.
If a feature is based on a lot of dependencies, contributors should
first
consider building the system outside of Dash Core, if possible.
-->
## Issue being fixed or feature implemented
<!--- Why is this change required? What problem does it solve? -->
<!--- If it fixes an open issue, please link to the issue here. -->
## What was done?
<!--- Describe your changes in detail -->
## How Has This Been Tested?
<!--- Please describe in detail how you tested your changes. -->
<!--- Include details of your testing environment, and the tests you ran
to -->
<!--- see how your change affects other areas of the code, etc. -->
## Breaking Changes
<!--- Please describe any breaking changes your code introduces -->
## Checklist:
<!--- Go over all the following points, and put an `x` in all the boxes
that apply. -->
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
<!--
*** Please remove the following help text before submitting: ***
Provide a general summary of your changes in the Title above
Pull requests without a rationale and clear improvement may be closed
immediately.
Please provide clear motivation for your patch and explain how it
improves
Dash Core user experience or Dash Core developer experience
significantly:
* Any test improvements or new tests that improve coverage are always
welcome.
* All other changes should have accompanying unit tests (see
`src/test/`) or
functional tests (see `test/`). Contributors should note which tests
cover
modified code. If no tests exist for a region of modified code, new
tests
should accompany the change.
* Bug fixes are most welcome when they come with steps to reproduce or
an
explanation of the potential issue as well as reasoning for the way the
bug
was fixed.
* Features are welcome, but might be rejected due to design or scope
issues.
If a feature is based on a lot of dependencies, contributors should
first
consider building the system outside of Dash Core, if possible.
-->
## Issue being fixed or feature implemented
<!--- Why is this change required? What problem does it solve? -->
<!--- If it fixes an open issue, please link to the issue here. -->
Macros should be avoided when possible, the compiler should be used
instead
## What was done?
<!--- Describe your changes in detail -->
Converted a macro to C++
## How Has This Been Tested?
<!--- Please describe in detail how you tested your changes. -->
<!--- Include details of your testing environment, and the tests you ran
to -->
<!--- see how your change affects other areas of the code, etc. -->
## Breaking Changes
<!--- Please describe any breaking changes your code introduces -->
none
## Checklist:
<!--- Go over all the following points, and put an `x` in all the boxes
that apply. -->
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
<!--
*** Please remove the following help text before submitting: ***
Provide a general summary of your changes in the Title above
Pull requests without a rationale and clear improvement may be closed
immediately.
Please provide clear motivation for your patch and explain how it
improves
Dash Core user experience or Dash Core developer experience
significantly:
* Any test improvements or new tests that improve coverage are always
welcome.
* All other changes should have accompanying unit tests (see
`src/test/`) or
functional tests (see `test/`). Contributors should note which tests
cover
modified code. If no tests exist for a region of modified code, new
tests
should accompany the change.
* Bug fixes are most welcome when they come with steps to reproduce or
an
explanation of the potential issue as well as reasoning for the way the
bug
was fixed.
* Features are welcome, but might be rejected due to design or scope
issues.
If a feature is based on a lot of dependencies, contributors should
first
consider building the system outside of Dash Core, if possible.
-->
## Issue being fixed or feature implemented
<!--- Why is this change required? What problem does it solve? -->
<!--- If it fixes an open issue, please link to the issue here. -->
globals should be avoided to avoid annoying lifetime / nullptr /
initialization issues
## What was done?
<!--- Describe your changes in detail -->
removed a global, g_evoDB
## How Has This Been Tested?
<!--- Please describe in detail how you tested your changes. -->
<!--- Include details of your testing environment, and the tests you ran
to -->
<!--- see how your change affects other areas of the code, etc. -->
make check
## Breaking Changes
<!--- Please describe any breaking changes your code introduces -->
none
## Checklist:
<!--- Go over all the following points, and put an `x` in all the boxes
that apply. -->
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [ ] I have assigned this pull request to a milestone
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: Kittywhiskers Van Gogh <63189531+kittywhiskers@users.noreply.github.com>
* llmq: move initialization logic to 'LLMQContext', add unique pointer to NodeContext
* llmq: add aliases to LLMQ globals, expose them to RPC via LLMQContext
* rpc: replace most global invocations with LLMQContext aliases
* rpc: replace quorum RPC global invocations with LLMQContext aliases
* llmq: replace individual global member arguments with context pointer
* llmq: pass aliased context pointer instead of individual globals in tests
* llmq: move BLS worker to LLMQContext, remove global
* llmq: move DKG debug manager to LLMQContext, remove global
* llmq: move DKG session manager to LLMQContext, remove global
* llmq: move quorum share manager to LLMQContext, remove global
* llmq: move quorum signing manager to LLMQContext, remove global
* llmq only logging
* llmq only logging
* style: reference on the left
* refactoring
* fix
* style: fix colon location in for loop
Co-authored-by: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
* fix: move chain activation logic downward to succeed LLMQ initialization
* fix: change order of initialization to reflect dependency
* llmq: pass all global pointers invoked as CDSNotificationInterface arguments
* llmq: pass reference to quorumDKGDebugManager instead of invoking global
* llmq: pass reference to quorumBlockProcessor instead of invoking global
* llmq: pass reference to quorumDKGSessionManager instead of invoking global
* llmq: pass reference to quorumManager instead of invoking global
Co-authored-by: "UdjinM6 <UdjinM6@users.noreply.github.com>"
* llmq: pass reference to quorumSigSharesManager within CSigningManager and networking
* llmq: pass reference to quorumSigSharesManager instead of invoking global
* llmq: pass reference to chainLocksHandler instead of querying global
* llmq: pass reference to quorumInstantSendManager instead of querying global
* trivial: accept argument as const where possible
* style: remove an unneeded const_cast and instead pass by const reference
* style: use const where possible
Co-authored-by: pasta <pasta@dashboost.org>
* refactor: create an enum for DKGError, instead of passing around potentially invalid strings
This also enables us to utilize an std::array instead of a std::map
This also removes the CCriticalSection and instead utilizes atomic doubles
This also adds safety to the dkgsimerror rpc rejecting invalid types
* test: add some tests for DKGError
* coinjoin: make CCoinJoinServer managed pointer, assign CConnman during init
* coinjoin: make CCoinJoinClientQueueManager managed pointer, assign CConnman during init
* sporks: move spork validation logic downwards after CConnman initialization
* sporks: make CSporkManager a pointer, reduce global invocations
* governance: make CGovernanceManager a pointer, reduce global invocations
* llmq: migrate LLMQ subsystem raw pointers to managed pointers
* masternode: make activeMasternodeManager a managed pointer
* masternode: make masternodeSync a managed pointer, assign CConnman during init
* refactor: make instantsend helper functions class members
* fix: send empty CDeterministicMNList if pointer isn't initialized yet
* fix: refactor governance object retrieval logic across node and ui
Update src/interfaces/node.cpp
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
This should help with v18 migration for nodes that failed to update in time. Still have to invalidate/reconsider the pre-fork quorum cycle start block to recalculate quorum members but it's better than having to reindex the whole chain.
* feat: Revive quorum scan caching
* refactor: split quorumsCacheCs mutex into two
* fix: Avoid extra work in quorum scanning
Non-rotation quorums do not become rotation ones (anymore), use `useRotation` to pick the right method only. This brings CPU load for `d-isman` thread (while being idle) from ~5% down to ~1% on testnet for me.
* apply suggestions
* refactor(llmq): substitute memberless class llmq::CLLMQUtils with namespace llmq::utils
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* chore: mark functions internal to `llmq::utils` as `static`
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
We must scan/cache keepOldConnections quorums or we won't be able to process sig shares signed in the 8 blocks window (signig offset) once new quorum(s) are mined.
* fix(llmq): Ensure connections between quorums
Every masternode will now "watch" a single node from _every other_ quorum in addition to intra-quorum connections. This should make propagation of recsigs produced by one quorum to other quorums much more reliable.
* fix: Do this only for masternodes which participate in IS quorums
* refactor: rename `CQuorumManager::EnsureQuorumConnections` to better match the actual behaviour
(and avoid confusion with `CLLMQUtils::EnsureQuorumConnections`)
* refactor: move IS quorums watch logic into `CQuorumManager::CheckQuorumConnections`
avoid calling slow `ScanQuorums` (no caching atm) inside the loop
* tests: check that inter-quorum connections are added
* use `ranges::any_of`
* fix(llmq): mark mns "bad" based on the failed connect attempts count
Avoid using "last success time" as a proxy
* fix(tests): tweak feature_llmq_simplepose.py
We only call AddQuorumProbeConnections when a new quorum is intialized. It's possible to miss the 10 minute probe window if Contribute phase takes too long (when 2 blocks were mined in 10+ minutes). 50 minutes should be enough and probing once in 10 minutes should be safe.
* feat(llmq): Introduce useRotation in LLMQParams
* fix(llmq): Fix IsQuorumRotationEnabled to recognize all dip0024 quorums
* fix(llmq): Do not allow rotation llmqs for `-llmqinstantsend` and non-rotation ones for `-llmqinstantsenddip0024`
* fix(llmq): Unify and fix IsMiningPhase
NOTE: no need for 1 extra block in mining phase for rotation quorums
* chore(llmq): Reduce the number of IsQuorumRotationEnabled calls
* chore(llmq): Improve logging
* feat(llmq): Make `llmq-` threads for rotation quorums distinguishable by quorum index
* fix(llmq): Fix another endless loop in GetQuorumRelayMembers
* throw an error when a llmq type with an incompatible rotation flag is picked for `-llmq...` params
* Add a note about loop conditions
* llmq: Make TransactionRemovedFromMempool the last action for invalid txes, just like we do for orphans with rejected parents
Write to log, send reject msg and (maybe) punish first and only then notify IS about the tx removal. Makes it easier to reason about it when reading logs.
* Remove unused variable
* [refactor] Move tx relay state to separate structure
* [refactor] Change tx_relay structure to be unique_ptr
* Check that tx_relay is initialized before access
* Add comment explaining intended use of m_tx_relay
* Add 2 outbound block-relay-only connections
Transaction relay is primarily optimized for balancing redundancy/robustness
with bandwidth minimization -- as a result transaction relay leaks information
that adversaries can use to infer the network topology.
Network topology is better kept private for (at least) two reasons:
(a) Knowledge of the network graph can make it easier to find the source IP of
a given transaction.
(b) Knowledge of the network graph could be used to split a target node or
nodes from the honest network (eg by knowing which peers to attack in order to
achieve a network split).
We can eliminate the risks of (b) by separating block relay from transaction
relay; inferring network connectivity from the relay of blocks/block headers is
much more expensive for an adversary.
After this commit, bitcoind will make 2 additional outbound connections that
are only used for block relay. (In the future, we might consider rotating our
transaction-relay peers to help limit the effects of (a).)
* Don't relay addr messages to block-relay-only peers
We don't want relay of addr messages to leak information about
these network links.
* doc: improve comments relating to block-relay-only peers
* Disconnect peers violating blocks-only mode
If we set fRelay=false in our VERSION message, and a peer sends an INV or TX
message anyway, disconnect. Since we use fRelay=false to minimize bandwidth,
we should not tolerate remaining connected to a peer violating the protocol.
* net_processing. Removed comment + fixed formatting
* Refactoring net_processing, removed duplicated code
* Refactor some bool in a many-arguments function to enum
It's made to avoid possible typos with arguments, because some of them have default values and it's very high probability to make a mistake here.
* Added UI debug option for Outbound
* Fixed data race related to `setInventoryTxToSend`, introduced in `[refactor] Move tx relay state to separate structure`
Co-authored-by: Suhas Daftuar <sdaftuar@gmail.com>
