* Handle attempts to read non-existent records from isdb properly
* Do not reject blocks that conflict with islocks while still syncing
Otherwise you can stuck with no new blocks/headers which means you won't be able to verify new chainlocks that might override stored islocks
* Handle duplicates/conflicting islocks better
* More constness
0784af16ef remove parameters -addresstype=legacy in rpc_rawtransaction test (LongShao007)
a65dafa8f1 replace tx hash with txid in test rawtransaction (LongShao007)
Pull request description:
The transaction hash is different from txid for witness transactions, so we should use txid instead of hash.
ACKs for commit 0784af:
Tree-SHA512: 98b699eb5f25c3a603b11eb7072efe9bc69c0c0ecc7f996405de31bc45d92105970e09fd8e4f75b42a46498817f596d36d9b28eae7d24e63a4f2f2abfcee0eab
fa566b2601ee5a40bf814e529d7db253dacd28e7 test: Add missing sync_blocks to feature_pruning (MarcoFalke)
Pull request description:
Fixes#16537Fixes#16520
ACKs for top commit:
promag:
ACK fa566b2601ee5a40bf814e529d7db253dacd28e7.
jonatack:
ACK fa566b2601ee5a40bf814e529d7db253dacd28e7. These past few months I have been seeing intermittent failures with this test on master. Ran `(for i in {1..40}; do test/functional/feature_pruning.py -l=debug; done)` overnight with this change; no failures.
Tree-SHA512: 5181d5ea525f43ad09e1c8b9ae72e32219f483948854c6dc07dda24b790cbdf4012e586253a0e158a71a980d1ca9f5fdf06aafbe95b8ea3d9154ef2c8687395b
fa4b8c90d3 test: add_nodes can only be called once after set_test_params (MarcoFalke)
faa831102a Revert "tests: Support calling add_nodes more than once" (MarcoFalke)
Pull request description:
Writing tests should be straightforward and with little side-effects as possible.
I don't see how this is needed and can not be achieved with `self.num_nodes` (and `self.extra_args` et al.)
Tree-SHA512: 83a67f2cba9d97e21d80847ff405a4633fcb0d5674486efa57ee1813e46efe8709ae0fb462b8339a01ebeca5c4f2d29ecb1807d648b8fd9ee8ce336b08d580a8
03d6d23810 [tests] make pruning test faster (John Newbery)
1c29ac40fb [tests] style fixes in feature_pruning.py (John Newbery)
Pull request description:
This commit makes the pruning.py much faster.
Key insights to do this:
- pruning.py doesn't care what kind of transactions make up the big
blocks that are pruned in the test. Instead of making blocks with
several large, expensive to construct and validate transactions,
instead make the large blocks contain a single coinbase transaction with
a huge OP_RETURN txout.
- avoid stop-starting nodes where possible.
ACKs for commit 03d6d2:
MarcoFalke:
utACK 03d6d238104d228acfae9f3e122879bddef8d27d
Tree-SHA512: 511642ce0fa294319dce3486fe06d75970d8ab66deda7f692be081d3056b4ce5b4cf91a7b5762eefbba224ba6c848750016454ff1e5d564acc507b1c41213628
947f73ceba7d74153fe83b538e42be1dfe77aea4 [docs] remove reference to signrawtransaction in the developer docs. (John Newbery)
7b6616b78bd9f76502002db1a209a0363979e506 [rpc] Remove deprecated functionality message from validateaddress help (John Newbery)
839c3f7c4937eb8a3e1e5ab2dafff26688af1078 [rpc] Remove signrawtransaction warning (John Newbery)
Pull request description:
Removes some deprecated code from the RPCs:
- signrawtransaction was deprecated in 0.17 and removed in 0.18. A warning message was left in place to advise users to use signrawtransactionwithwallet and signrawtransactionwithkey. That warning can now be removed.
- validateaddress had some functionality deprecated in 0.17 and removed in 0.18. The help text for that functionality was not removed in 0.18 and can be removed now.
Tree-SHA512: 981678a697954ff2c392752e5a183b4b12c4eb94f55766ee1aa97a70d300668237db8fc5748c2772869d0155ba4a93e38817887b98160ee972a6f6ee94e3f7d9
1a7ba84e11 Fix lack of warning of unrecognized section names (Akio Nakamura)
Pull request description:
In #14708, It was introduced that to warn when unrecognized section names are exist in the config file.
But ```m_config_sections.clear()``` in ```ArgsManager::ReadConfigStream()``` is called every time when reading each configuration file, so it can warn about only last reading file if ```includeconf``` exists.
This PR fix lack of warning by collecting all section names by moving ```m_config_sections.clear()``` to ```ArgsManager::ReadConfigFiles()``` .
Also add a test code to confirm this situation.
Tree-SHA512: 26aa0cbe3e4ae2e58cbe73d4492ee5cf465fd4c3e5df2c8ca7e282b627df9e637267af1e3816386b1dc6db2398b31936925ce0e432219fec3a9b3398f01e3e65
fad0ce59e9 tests: Fail if RPC has been added without tests (MarcoFalke)
Pull request description:
Need to be run with --coverage
ACKs for commit fad0ce:
ryanofsky:
utACK fad0ce59e9154f9b7e61907a71c740a942c60282. New comment in travis.yml is the only change since last review.
Tree-SHA512: b53632dfe9865ec06991bfcba2fd67238bebbb866b355f09624eaf233257b2bca902caac6c24abb358b2f4c1c43f28ca75e30982765911e1a117102df65276d9
fa90a89eee [test] combine_logs: append node stderr and stdout if it exists (MarcoFalke)
Pull request description:
See issue:
* tests: bitcoind stdout and error should be passed to the logger #13519
ACKs for commit fa90a8:
laanwj:
utACK fa90a89eeefcc362970216d95973ad01a21366ed
Tree-SHA512: 39c4596e2e133c9011ab01bc4dc24e884d0a8cce7a67d3765f17c288d3ffbd438e1ff6016d0f817a981b27fce17fa77a1ff56787ddb1ea55123ce9ecffb44c08
4aabadbf44 tests: have combine_logs default to most recent test dir (James O'Beirne)
Pull request description:
Have `combine_logs.py` default to the most recent test directory if no argument is provided. This allows you to avoid an annoying copy-paste when iterating on a failing test, since you can do something like
```sh
alias testlogs='./test/functional/combine_logs.py -c | less'
./test/functional/some_test.py # fails
testlogs
```
Tree-SHA512: 919642ab09c314888a23c9491963b35b9da87e60deb740d1d5e816444aa9bdda5e519dc8ca131669f2d563167ef5f5abb14e22f20f47bf8362915ed578181846
a2a04a5abb Bugfix: Only run bitcoin-tx tests when bitcoin-tx is enabled (Luke Dashjr)
92af71cea9 configure: Make it possible to build only one of bitcoin-cli or bitcoin-tx (Luke Dashjr)
Pull request description:
Includes #5618 (which the reasons for rejecting no longer hold true)
Tree-SHA512: f30a8e4a2f70166b7cabef77c4674163b3a9da14c6a547d34f00d1056a19bf4d23e22851eea726fad2afc8735d5473ae91122c770b65ac3886663dc20e2c5b70
When receiving an islock, propagate it as islock.
When creating/receiving and isdlock, propagate it as isdlock to peers which support it and as islock to peers which don't.
Functional tests to cover both islock and isdlock scenarios.
3d0a82cff8cbb809876e82dbe62d14d2adc07d94 devtools: Accomodate block-style copyright blocks (Ben Woosley)
0ef0e51fe4bb592e67255776b5a0ba04679fb8c4 lint: Bump flake8 to 3.7.8 (Ben Woosley)
838920704ad90a71cf288b700052503db8abb17e lint: Disable flake8 W504 warning (Ben Woosley)
b21680baf5391a602b295b9d7d0ef66553661cb9 test/contrib: Fix invalid escapes in regex strings (Ben Woosley)
Pull request description:
This is a second go at #15221, fixing new lints in:
W504 line break after binary operator
W605 invalid escape sequence
F841 local variable 'e' is assigned to but never used
This time around:
* One commit per rule, for easier review
* I went with the PEP-8 style of breaking before binary operators
* I looked into the raw regex newline issue, and found that raw strings with newlines embedded do work appropriately. E.g. run `re.match(r" \n ", " \n ")` to check this for yourself. `re.MULTILINE` exists to modify `^` and `$` in multiline scenarios, but all of these searches are per-line.
ACKs for top commit:
practicalswift:
ACK 3d0a82cff8cbb809876e82dbe62d14d2adc07d94 -- diff looks correct
Tree-SHA512: bea0c144cadd72e4adf2e9a4b4ee0535dd91a8e694206924cf8a389dc9253f364a717edfe9abda88108fbb67fda19b9e823f46822d7303c0aaa72e48909a6105
3f6568d66b cli: remove duplicate wallet fields from -getinfo (fanquake)
Pull request description:
`walletversion` and `balance` are both included below.
Tree-SHA512: cd9fe9739a2f492c8f7c0407b43a6fa95187f7e5318f05e080bac112f9f4333d2e9b84c505d098f8d66fa79439007d1c0b22e5a87d70bf5ea53ab647ee4c2046
890396cbd5 cli: replace testnet with chain and return network name as per BIP70. (fanquake)
Pull request description:
Related IRC discussion [here (line 151)](http://www.erisian.com.au/bitcoin-core-dev/log-2019-03-09.html).
Tree-SHA512: 8bdbacc7b8ce8bd2cc7c47aa9d73f2830a7c2e2ec43686430e3fba1a9db0e53a285467f26cde6dcc3bf948b7d6d59b9b7f184ce1a30a8970f39e5396dfc122f0
* partial Merge #14454: Add SegWit support to importmulti
c11875c5908a17314bb38caa911507dc6401ec49 Add segwit address tests for importmulti (MeshCollider)
201451b1ca3c6db3b13f9491a81db5b120b864bb Make getaddressinfo return solvability (MeshCollider)
1753d217ead7e2de35b3df6cd6573a1c9a068f84 Add release notes for importmulti segwit change (MeshCollider)
353c064596fc2e2c149987ac3b3c11b4c90c4d5f Fix typo in test_framework/blocktools (MeshCollider)
f6ed748cf045d7f0d9a49e15cc0c0001610b9231 Add SegWit support to importmulti with some ProcessImport cleanup (MeshCollider)
Pull request description:
Add support for segwit to importmulti, supports P2WSH, P2WPKH, P2SH-P2WPKH, P2SH-P2WSH. Adds a new `witnessscript` parameter which must be used for the witness scripts in the relevant situations.
Also includes some tests for the various import types.
~Also makes the change in #14019 redundant, but cherry-picks the test from that PR to test the behavior (@achow101).~
Fixes#12253, also addresses the second point in #12703, and fixes#14407
Tree-SHA512: 775a755c524d1c387a99acddd772f677d2073876b72403dcfb92c59f9b405ae13ceedcf4dbd2ee1d7a8db91c494f67ca137161032ee3a2071282eeb411be090a
# Conflicts:
# src/wallet/rpcdump.cpp
# test/functional/test_framework/blocktools.py
# test/functional/wallet_importmulti.py
* make linter happy
Signed-off-by: pasta <pasta@dashboost.org>
* Fixes: trivial + linter + add missing consistency check + more/redo 14679
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
fab98992043f47fa7240d7c1217920d0c4f783a2 test: Try once more when RPC connection fails on Windows (MarcoFalke)
faa655731eac751d4eb494268e2c815493ba9382 test: Document why connection is re-constructed on windows (MarcoFalke)
fa9f4f663c36b0824406036445e5cff0a78174e9 test: Remove python 3.4 workaround (MarcoFalke)
fae760f2b24cb26494b65c0a7ac38b92ead345af cirrus: Bump freebsd to 12.1 (MarcoFalke)
Pull request description:
Fixes: #18548
ACKs for top commit:
hebasto:
ACK fab98992043f47fa7240d7c1217920d0c4f783a2, I have reviewed the code and it looks OK, I agree it can be merged.
Tree-SHA512: c4e9ed8d995b63a820ca66984f152ac216c83ba1f318b61b15c6d375c0e936c08f6bc3d38c255dddf3ee8952f848c7ababf684854e07a7c1b1d8504e6b7208ba
369244f654 utils: Fix broken Windows filelock (Chun Kuan Lee)
Pull request description:
Fix broken filelock on Windows, also add a test for this. It's a regression introduced by #13862.
Tree-SHA512: 15665b1930cf39ec71f3ab07def8e2897659f6fd4d2de749d63a5a8ec920e4a04282f12bc262f242b1b3d14d2dd9fa191ddbcf16a46fb927b5b2b14d9f6b5d01
faa4043c66 qa: Run more tests with wallet disabled (MarcoFalke)
Pull request description:
Instead of skipping the whole test, only skip the wallet specific section of a test if the wallet is not compiled in. This is mostly an indentation change, so can be reviewed with `--ignore-all-space`.
Tree-SHA512: 5941a8b6b00dca5cf9438c5f6f010ba812115188a69e427d7ade4c1ab8cfe7a57c73daf52c66235dbb24b1cd9ab7c7a17c49bc23d931e041b605d79116a71f66
Merge #14324: qa: Run more tests with wallet disabled
faa4043c66 qa: Run more tests with wallet disabled (MarcoFalke)
Pull request description:
Instead of skipping the whole test, only skip the wallet specific section of a test if the wallet is not compiled in. This is mostly an indentation change, so can be reviewed with `--ignore-all-space`.
Tree-SHA512: 5941a8b6b00dca5cf9438c5f6f010ba812115188a69e427d7ade4c1ab8cfe7a57c73daf52c66235dbb24b1cd9ab7c7a17c49bc23d931e041b605d79116a71f66
168b6c317ca054c1287c36be532964e861f44266 add dummy file param to fix jupyter (Josiah Baker)
Pull request description:
this fixes argparse to use `parse_known_args`. previously, if an unknown argument was passed, argparse would fail with an `unrecognized arguments: %s` error.
## why
the documentation mentions being able to run `TestShell` in a REPL interpreter or a jupyter notebook. when i tried to run inside a jupyter notebook, i got the following error:
this was due to the notebook passing the filename of the notebook as an argument. this is a known problem with notebooks and argparse, documented here: https://stackoverflow.com/questions/48796169/how-to-fix-ipykernel-launcher-py-error-unrecognized-arguments-in-jupyter
## testing
to test, make sure you have jupyter notebooks installed. you can do this by running:
```
pip install notebook
```
or following instructions from [here](https://jupyterlab.readthedocs.io/en/stable/getting_started/installation.html).
once installed, start a notebook (`jupyter notebook`), launch a python3 kernel and run the following snippet:
```python
import sys
# make sure this is the path for your system
sys.path.insert(0, "/path/to/bitcoin/test/functional")
from test_framework.test_shell import TestShell
test = TestShell().setup(num_nodes=2, setup_clean_chain=True)
```
you should see the following output, without errors:
if you are unfamiliar with notebooks, here is a short guide on using them: https://jupyter.readthedocs.io/en/latest/running.html
ACKs for top commit:
MarcoFalke:
review ACK 168b6c317ca054c1287c36be532964e861f44266
jamesob:
crACK 168b6c317c
practicalswift:
cr ACK 168b6c317ca054c1287c36be532964e861f44266
Tree-SHA512: 4fee1563bf64a1cf9009934182412446cde03badf2f19553b78ad2cb3ceb0e5e085a5db41ed440473494ac047f04641311ecbba3948761c6553d0ca4b54937b4
e1fdd2963baab68bb6a77af2ad7a07fcacd4e73e Test batch rpc with params (Gregory Sanders)
Pull request description:
Useful as an example and test case.
ACKs for top commit:
laanwj:
ACK e1fdd2963baab68bb6a77af2ad7a07fcacd4e73e
theStack:
ACK e1fdd2963baab68bb6a77af2ad7a07fcacd4e73e
Tree-SHA512: 2d2ba8960916342b264a14624857d6dd10005be12efafb3e970b82656f721c8f3700ebc9b8809de1b2f887d482b772043504aeaeebc7f2e1c8203f076a451526
ff94da7887 tests: Make appveyor run with --usecli (practicalswift)
db01839361 test: Add missing call to skip_if_no_cli() (practicalswift)
Pull request description:
Add missing call to `skip_if_no_cli()` as suggested by @MarcoFalke in #14365.
Tree-SHA512: b0a2ddfad0f81cc9544f63c4e490fb983d833a47c23522549d1200ea6a8a132b2cd4bf0d66b862ef3a548d8471128b80aea3525fb5dec65221e23f32a8d46746
c7b3e487f2 tests: exclude all tests with difference parameters (Chun Kuan Lee)
Pull request description:
Fix broken exclusion list in functional tests. See https://github.com/bitcoin/bitcoin/pull/14007#pullrequestreview-158309105
Tree-SHA512: b6c2b86fef13e3c00c695adaeeb3e47ee9b48877c71bc605d24201ce931b2ef3ae9f5f199071fa1ec5de2d7aadc478410094c380cc297922e683e9b2569cda03
0ca4c8b3c6 Changed functional tests which do not require wallets to run without (sanket1729)
Pull request description:
Addresses #14216 . Changed Changed `get_deterministic_priv_key()` to return named tuple`(address, key)`
I have tried to be exhaustive as possible in maximum coverage for non-wallet mode without affecting any coverage for wallet mode.
However, I could not check the tests in wallet mode because of timeout issues. Hopefully, travis job checks those.
Tests `feature_block.py`, `feature_logging.py` and `feature_reindex.py` were skipping despite having no direct dependency on any wallet functions. So, I have also disabled the `skip_test_no_wallet()` for those files too.
Tree-SHA512: 8f84bd8400a732d4266c7518d5cbcf1eb761f623a64a74849e0470142c8ef22cb75364474ddae75d9213c3d16659a52917b5ed979a313695da6abd16c4fd7445
fac95398366f644911b58f1605e6bc37fb76782d qa: Run all tests even if wallet is not compiled (MarcoFalke)
faa669cbcd1fc799517b523b0f850e01b11bf40a qa: Premine to deterministic address with -disablewallet (MarcoFalke)
Pull request description:
Currently the test_runner would exit if the wallet was not compiled into the Bitcoin Core executable. However, a lot of the tests run without the wallet just fine and there is no need to globally require the wallet to run the tests.
Tree-SHA512: 63177260aa29126fd20f0be217a82b10b62288ab846f96f1cbcc3bd2c52702437703475d91eae3f8d821a3149fc62b725a4c5b2a7b3657b67ffcbc81532a03bb
661ac15a4a appveyor: Run functional tests on appveyor (Chun Kuan Lee)
2148c36b6e tests: Make it possible to run functional tests on Windows (Chun Kuan Lee)
Pull request description:
This PR do the following things:
- Make functional tests compatible with Windows
- Print color output in functional tests for Windows 10
- Run util and functional tests on appveyor
- Do not run symlink tests on Windows
Note:
- The wallet_multiwallet.py fail is unrelated to the test framework, it's a bug related to c++ code or maybe dependencies. `bitcoind` would exit with 0xC0000005(Access violation) during shutdown occasionally. Disable this for now.
- Not using `--failfast` because this is still in experimental. We should track if there is any other error.
- Disable ZMQ tests because the python zmq library could cause access violation sometimes.
- Disable `feature_notifications` because Bitcoin Core handles the command in different thread, whicha can cause a race condition.
Tree-SHA512: b76db137d264e62a5c130e1cbca7a2ca002a7a0f4153fa0b92c1ea6c9c09ef0533e11c49bdbd566c472d8ff59f245758feb5e5a6ec6cb6bb66a1c67bab5fa48a
82fc4017b774aaff8799c2b6e8ba5370d94dbf4d test: Catch decimal.InvalidOperation from TestNodeCLI#send_cli (Ben Woosley)
Pull request description:
`decimal.InvalidOperation` is a special case of a float parsing error, which
presumably should be handled in the same way as a general parsing error,
rather than blow up.
Alternatives include: logging the error, or re-raising with more information.
Example log output:
```
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_framework.py", line 603, in sync_all
self.sync_blocks(nodes)
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_framework.py", line 568, in sync_blocks
best_hash = [x.getbestblockhash() for x in rpc_connections]
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_framework.py", line 568, in <listcomp>
best_hash = [x.getbestblockhash() for x in rpc_connections]
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_node.py", line 571, in __call__
return self.cli.send_cli(self.command, *args, **kwargs)
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_node.py", line 639, in send_cli
return json.loads(cli_stdout, parse_float=decimal.Decimal)
File "/usr/lib64/python3.6/json/__init__.py", line 367, in loads
return cls(**kw).decode(s)
File "/usr/lib64/python3.6/json/decoder.py", line 339, in decode
obj, end = self.raw_decode(s, idx=_w(s, 0).end())
File "/usr/lib64/python3.6/json/decoder.py", line 355, in raw_decode
obj, end = self.scan_once(s, idx)
decimal.InvalidOperation: [<class 'decimal.InvalidOperation'>]
```
See: https://travis-ci.org/github/bitcoin/bitcoin/jobs/713502326
ACKs for top commit:
laanwj:
ACK 82fc4017b774aaff8799c2b6e8ba5370d94dbf4d
Tree-SHA512: 8c102b8bf831b05c5ca4b2e1feb5574dcbaed8cab0b2f22b013c5dfcb81788a38839a163dd1e2c6470ccbe5874214663b84485f45467738fd850ca38d539ae25
2c6a02e0248825e205e6deea4c38409044feb4ab Clean message_count and last_message (Troy Giorshev)
Pull request description:
From #19580
This PR changes comments to clarify the intended usage of `message_count` and `last_message`. Additionally it changes the only usage of `message_count` to use `last_message` instead, bringing the code into alignment with the intended usage.
Note: Now `message_count` is completely unused. However, it is ready to be used (i.e. the supporting code works) and likely will be used in some test in the future.
ACKs for top commit:
jnewbery:
utACK 2c6a02e0248825e205e6deea4c38409044feb4ab
Tree-SHA512: 07c7684c9586de4f845e10d7aac36c1aab9fb56b409949c1c70d5ca705bc3971ca7d5943245a0472def4efd7b4e1c5dad2f713db5ead8fca08404daf4891e98b
233a886b4221190a3e53128162d708266494576e test: check that getblockfilter RPC fails without block filter index (Sebastian Falbesoner)
Pull request description:
If a node was started without compact block filter index (parameter `--blockfilterindex=0`), the `getblockfilter` RPC call should fail.
ACKs for top commit:
MarcoFalke:
review ACK 233a886b4221190a3e53128162d708266494576e
Tree-SHA512: c8824373fad7d1de2dcb43c1d9541d736b478235be243080d2b7479c2588eac0e5722337ec1307394b331e0002fbcabb368e4955c2dc98dd5fce76d8c089e8a1
9e165d0de4c3cd168137fc85b8f31b371bd4e851 test: Wait for 'cmpctblock' in p2p_compactblocks when it is expected (Ben Woosley)
Pull request description:
This is a more narrowly-construed wait which eliminates the possibility of the
wait being triggered by other messages.
Note `received_block_announcement` reflect three possible messages:
edec7f7c25/test/functional/p2p_compactblocks.py (L34-L53)
Prompted by looking into: #19449
ACKs for top commit:
laanwj:
Code review ACK 9e165d0de4c3cd168137fc85b8f31b371bd4e851
theStack:
ACK 9e165d0de4
Tree-SHA512: bc4a9c8bf031c8a7efb40d9625feaa3fd1f56f3b75da7034944af71ccea44328a6c708ab0c13fea85fb7cf4fd9043fe90eb94a25e95b2d42be44c2962b4904ce
fac3e22b18cd29053bc17065fd75db7b84ba6f40 qa: Read reject reasons from debug log, not p2p messages (MarcoFalke)
Pull request description:
For local testing we don't need to rely on p2p messages just to assert a reject reason.
Replace reading p2p messages with reading from the debug log file.
Tree-SHA512: fa59598ecf5e00cfb420ef1892d90aa415501fd882e1c608894dc577b0d00e93a442326d3a9167fef77d26aafbe345b730b49109982ccad68a5942384564a90b
bb08423d5ca866d4a139a3b57ff110d818d08b32 [doc] Add release notes for 'account' API removal (John Newbery)
1f4b865e57b4567270b1586bb1f348ab9106485d [wallet] Re-sort wallet RPC commands (John Newbery)
f0dc850bf698f7377797d7d68365d4fc79b0221c [wallet] Remove wallet account RPCs (John Newbery)
c410f415758913c933ad6c71cf50227cc85aa385 [tests] Remove wallet accounts test (John Newbery)
Pull request description:
This is the first part of #13825. It simply removes the RPC methods and tests.
#13825 touches lots of files and will require frequent rebasing.
Breaking it down for easier reviewing and fewer rebases.
Tree-SHA512: d29af8e7a035e4484e6b9bb56cb86592be0ec112d8ba4ce19c15d15366ff3086e89e99fca26b90c9d66f6d3e06894486d0f29948df0bb7dcb1e2c49c6887a85a
f13ad1cae0 modify test for memory locked in case locking pages failed at some point (Adam Jonas)
2fa85ebd1c add rpc_misc.py, mv test getmemoryinfo, add test mallocinfo (Adam Jonas)
Pull request description:
Creating the `rpc_misc.py` functional test file to add space for adding tests to a file that doesn't have a lot of coverage.
- Removing the `getmemoryinfo()` smoke test from wallet basic rather than moving it to keep the wallet decoupled. Feel like testing for reasonable memory allocation values should suffice.
- Adding coverage for `mallocinfo()`. Introduced standard lib XML parser since the function exports an XML string that describes the current state of the memory-allocation implementation in the caller.
Tree-SHA512: ced30115622916c88d1e729969ee331272ec9f2881eb36dee4bb7331bf633a6810a57fed63a0cfaf86de698edb5162e6a035efd07c89ece1df56b69d61288072
a2eb6f5405 [rpc] Add getnodeaddresses RPC command (chris-belcher)
Pull request description:
Implements issue https://github.com/bitcoin/bitcoin/issues/9463
New getnodeaddresses call gives access via RPC to the peers known by the node. It may be useful for bitcoin wallets to broadcast their transactions over tor for improved privacy without using the centralized DNS seeds. getnodeaddresses is very similar to the getaddr p2p method.
Please advise me on the best approach for writing an automated test. By my reading the getaddr p2p method also isn't really tested.
Tree-SHA512: ad03abf518847476495b76a2f5394b8030aa86654429167fa618e21460abb505c10ef9817ec1b80472320d41d0aff5dc94a8efce023aaaaf5e81386aa92b852b
Co-authored-by: MarcoFalke <falke.marco@gmail.com>
fa852f0e8d test: Bump timeout on tests that timeout on windows (MarcoFalke)
Pull request description:
Those tests build a ton of blocks and time out for me on Windows with:
```
test_framework.authproxy.JSONRPCException: 'generatetoaddress' RPC took longer than 60.000000 seconds. Consider using larger timeout for calls that take longer to return. (-344)
Tree-SHA512: a8fffeaddd02c051fbcc04bfac69f6ed826b8f16616e3b2e210a469d07c3e5706baab8121f1cd7ed265481de3a6197cf371513e2afbe506cf13b1dabfe3a0005
8e4b4f683a0b342cec24cd51b1e98433034ea2ea Address test todos by removing -txindex to nodes. Originally added when updating getrawtransaction to stop searching unspent utxos. (Amiti Uttarwar)
Pull request description:
Original todos added when removing getrawtransaction default behavior of searching unspent utxos.
Tree-SHA512: d080953c3b0d2e5dca2265a15966dc25985a614c9cc86271ecd6276178ce428c85e262c24df92501695c32fed7beec0339b989f03cce91b57fb2efba201b7809
fae8b8bb1a qa: Add tool-prefix to functional test readme (MarcoFalke)
faf3d22725 test_runner: Remove unused --force option (MarcoFalke)
Pull request description:
When someone calls the script they already have all intention to call it, no need to specify a redundant `--force`.
The functional tests are still disabled on the travis windows cross builds, where they'd run into issues when run under Wine.
Tree-SHA512: ada0dd9b3c0cd28c5832a12c5e04c029dc3bfe5ddf366fd0abc24fb7914d2e0f0a873fe756ade7ba780a561abe9bc731838c289accc421deda481269e08514cd
62d3f5057f2ed0c8646839f38dbe29adf4601502 qa: fix deprecated log.warn in feature_dbcrash test (Jon Atack)
Pull request description:
This clears up the following deprecation message when running test/functional/feature_dbcrash.py:
```
test/functional/feature_dbcrash.py:270:
DeprecationWarning: The 'warn' method is deprecated, use 'warning' instead
self.log.warn("Node %d never crashed during utxo flush!", i)
```
Git grepping indicates that this was the last remaining use of `log.warn` in the functional tests.
ACKs for top commit:
fanquake:
ACK 62d3f5057f2ed0c8646839f38dbe29adf4601502 - checked that there were no more occurrences.
Tree-SHA512: 2fe87400f82488e44391f4897876003a98736013e819a7dbc3b3e87a5ffbfba8d5ccab81cf2b7577f40135c95e4db96e93bb8cb24de396efb4ad814fbda09559
a407b6fdf3 [tests] Make random seed logged and settable (John Newbery)
Pull request description:
This allows tests which use randomness to be reproducibly run on failure.
ACKs for commit a407b6:
jonatack:
re-ACK a407b6fdf34f77eb347378674da9cf80394897de
jb55:
great! utACK a407b6fdf34f77eb347378674da9cf80394897de
Tree-SHA512: e1e89e6e76d11ddec71a8f0f077227e4b46303f80461b170900d3f95d4dcc4187b0d1decfd63562ea970aaaf530ef032a3e64ed1669aac29033d95161855fda3
fa6ab8ada1 rpc: Return more specific reject reason for submitblock (MarcoFalke)
Pull request description:
The second commit in #13439 made the `TODO` in the first commit impossible to solve.
The meaning of `fNewBlock` changed from "This is the first time we process this block" to "We are about to write the new *valid* block".
So whenever `fNewBlock` is true, the block was valid. And whenever the `fNewBlock` is false, the block is either valid or invalid. If it was valid and not new, we know it is a `"duplicate"`. In all other cases, the `BIP22ValidationResult()` will return the reason why it is invalid.
Tree-SHA512: 4b6edf7a912339c3acb0fccfabbdd6d812a0321fb1639c244c2714e58dc119aa2b8c6bf8f7d61ea609a1b861bbc23f920370fcf989c48452721e259a8ce93d24
Co-authored-by: MarcoFalke <falke.marco@gmail.com>
faee59103d test: Fix race in mempool_accept (MarcoFalke)
Pull request description:
If we happen to pick the same random coin to spend, there would be mempool conflicts in some runs of the test. Fix that by popping from a static list of coins to spend from.
Tree-SHA512: f6fd37e43d919371aa8bc3a2c93b569f9169961fe702f3641bb63180c3a88f12ca1857e9ed4d3723d5f04ca8ab5ef009a90e679580f36246a10b987620a55bee
8f5d9431a Add regtests for HTTP status codes. (Daniel Kraft)
Pull request description:
This adds explicit tests for the returned HTTP status codes to `interface_rpc.py` (for error cases) and the HTTP JSON-RPC client in general for success.
#15381 brought up discussion about the HTTP status codes in general, and the general opinion was that the current choice may not be ideal but should not be changed to preserve compatibility with existing JSON-RPC clients. Thus it makes sense to actually test the current status to ensure this desired compatibility is not broken accidentally.
ACKs for commit 8f5d94:
laanwj:
utACK 8f5d9431a36740aa12abc0acea64df48fe32d2a6
promag:
utACK 8f5d943.
jonasschnelli:
utACK 8f5d9431a36740aa12abc0acea64df48fe32d2a6
Tree-SHA512: 82503ccd134dd9145304e95cb6c61755f100bee27593d567cdd5c0c554d47e7b06d937456cab04107f46f4984930355db65d5e711008a0b05f2b8feec9f2950e
aaaa8eb1edba2a28916d5da6001d421c1b1b253b test: consensus: Check that final transactions are valid (MarcoFalke)
fae3617d79deee73dd375dc3ea5f4204a74420c5 test: Correctly deserialize without witness (MarcoFalke)
Pull request description:
There is no check that checks that final transactions are valid, i.e. the consensus rules could be changed (accidentally) with none of the tests failing.
Tree-SHA512: 48f4c24bfcc525ddbc1bfe8c37131953b464823428c1f7a278ba6d98b98827b6b84a8eb2b33396bfb5b8cc4012b7cc1cd771637f405ea20beddae001c22aa290
6440e61375 qa: Drop RPC connection if --usecli (João Barbosa)
Pull request description:
Drop the RPC connection used in `TestNode.wait_for_rpc_connection` if `--usecli` is set. If the connection is kept and not used the `Connection: close` header is never sent and so the connection only closes due to timeout (30 sec).
It might be sensible to revert e98a9eede2fb48ff33a020acc888cbcd83e24bbf in a follow up, however it changes the shutdown behavior.
Tree-SHA512: 2a8ee68b82ab612a556390aae521379e592c39ea0a7855a119282e6fe4cbf02ecafe7a5e2ee37d480f2c0600fa64791117a80fecc7bbe6bbb354107972b3b320
