* scripted-diff: Replace #include "" with #include <> (ryanofsky)
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* scripted-diff: Replace #include "" with #include <> (Dash Specific)
-BEGIN VERIFY SCRIPT-
for f in \
src/bls/*.cpp \
src/bls/*.h \
src/evo/*.cpp \
src/evo/*.h \
src/governance/*.cpp \
src/governance/*.h \
src/llmq/*.cpp \
src/llmq/*.h \
src/masternode/*.cpp \
src/masternode/*.h \
src/privatesend/*.cpp \
src/privatesend/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* build: Remove -I for everything but project root
Remove -I from build system for everything but the project root,
and built-in dependencies.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/Makefile.test.include
* qt: refactor: Use absolute include paths in .ui files
* qt: refactor: Changes to make include paths absolute
This makes all include paths in the GUI absolute.
Many changes are involved as every single source file in
src/qt/ assumes to be able to use relative includes.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/qt/dash.cpp
# src/qt/optionsmodel.cpp
# src/qt/test/rpcnestedtests.cpp
* test: refactor: Use absolute include paths for test data files
* Recommend #include<> syntax in developer notes
* refactor: Include obj/build.h instead of build.h
* END BACKPORT #11651 Remove trailing whitespace causing travis failure
* fix backport 11651
Signed-off-by: Pasta <pasta@dashboost.org>
* More of 11651
* fix blockchain.cpp
Signed-off-by: pasta <pasta@dashboost.org>
* Add missing "qt/" in includes
* Add missing "test/" in includes
* Fix trailing whitespaces
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: MeshCollider <dobsonsa68@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
3830b6e net: use CreateSocket for binds (Cory Fields)
df3bcf8 net: pass socket closing responsibility up to caller for outgoing connections (Cory Fields)
9e3b2f5 net: Move IsSelectableSocket check into socket creation (Cory Fields)
1729c29 net: split socket creation out of connection (Cory Fields)
Pull request description:
Requirement for #11227.
We'll need to create sockets and perform the actual connect in separate steps, so break them up.
#11227 adds an RAII wrapper around connection attempts, as a belt-and-suspenders in case a CloseSocket is missed.
Tree-SHA512: de675bb718cc56d68893c303b8057ca062c7431eaa17ae7c4829caed119fa3f15b404d8f52aca22a6bca6e73a26fb79e898b335d090ab015bf6456cf417fc694
b887676 net: remove now-unused functions (Cory Fields)
45fd754 net: remove now-superfluous numeric resolve (Cory Fields)
2416dd7 net: separate resolving and conecting (Cory Fields)
Pull request description:
This is a greatly simplified version of #10285, which only aims to address async resolving.
It essentially breaks up two wrapper functions for things only used in one place (ConnectSocketDirectly/ConnectThroughProxy) in favor of calling them directly. This allows us to fully handle resolves before attempting a connection, as is necessary for async connections.
As a bonus, I believe the logic is now much easier to follow than before.
Tree-SHA512: f03f618107379edf3efe2a9f3e3677e8f075017ab140a0b4fdc3b8263e6beff148d55256263ab10bc2125ef089ca68e0d8e865beeae176f1eca544e769c976d3
ConnectSocket -> ConnectSocketDirectly
Signed-off-by: Pasta <pasta@dashboost.org>
64fb0ac Declare single-argument (non-converting) constructors "explicit" (practicalswift)
Pull request description:
Declare single-argument (non-converting) constructors `explicit`.
In order to avoid unintended implicit conversions.
For a more thorough discussion, see ["C.46: By default, declare single-argument constructors explicit"](http://isocpp.github.io/CppCoreGuidelines/CppCoreGuidelines#c46-by-default-declare-single-argument-constructors-explicit) in the C++ Core Guidelines (Stroustrup & Sutter).
Tree-SHA512: e0c6922e56b11fa402621a38656d8b1122d16dd8f160e78626385373cf184ac7f26cb4c1851eca47e9b0dbd5e924e39a85c3cbdcb627a05ee3a655ecf5f7a0f1
36d326e8b Use nullptr instead of zero (0) as the null pointer constant (practicalswift)
Pull request description:
Use `nullptr` instead of zero (0) as the null pointer constant.
The road towards `nullptr` (C++11) is split into two PRs:
* `NULL` → `nullptr` is handled in PR #10483 (scripted)
* `0` → `nullptr` is handled in PR #10645 (manual, this PR)
By using the C++11 keyword `nullptr` we are guaranteed a prvalue of type `std::nullptr_t`.
For a more thorough discussion, see "A name for the null pointer: nullptr" (Sutter &
Stroustrup), http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2431.pdf
Tree-SHA512: 5412404b40a94ea2d9fc8f81573559c4ffe559749301d486b09d41a7a736345ad602d08ac590930bb00a49692b6075520cf3d543e4da6ccd5b29fa9bcc3f15ea
05e023f Move CloseSocket out of SetSocketNonBlocking and pass SOCKET by const reference in SetSocket* functions (Dag Robole)
Pull request description:
Rationale:
Readability, SetSocketNonBlocking does what it says on the tin.
Consistency, More consistent with the rest of the API in this unit.
Reusability, SetSocketNonBlocking can also be used by clients that may not want to close the socket on failure.
This also moves the responsibility of closing the socket back to the caller that opened it, which in general should know better how and when to close it.
Tree-SHA512: 85027137f1b626e2b636549ee38cc757a587adcf464c84be6e65ca16e3b75d7ed1a1b21dd70dbe34c7c5d599af39e53b89932dfe3c74f91a22341ff3af5ea80a
5c643241e [utils] allow square brackets for ipv6 addresses in bitcoin-cli (John Newbery)
fe4fabaf1 [refactor] move SplitHostPort() into utilstrencodings (John Newbery)
Pull request description:
bitcoin-cli's `-rpcconnect` can accept ipv6 addresses (as long as the libevent version is new enough), but fails to parse ipv6 with square brackets. This PR makes `bitcoin-cli` parse ipv6 in square brackets correctly.
`bitcoin-cli -rpcconnect=[::1] <command>`
should now be equivalent to
`bitcoin-cli -rpcconnect=::1 <command>`
This is useful so the `bitcoin-cli` option can now be in the same format as the `bitcoind` option.
Doesn't include tests. I have a branch that fully tests `bitcoin-cli`, but that's queued behind several intermediate PRs.
- first commit moves `SplitHostPort()` from libbitcoin_common into libbitcoin_util
- second commit adds proper ipv6 parsing to bitcoin-cli
Tree-SHA512: 249d409f10360c989474283341f458cc97364a56a7d004ae6d5f13d8bffe3a51b5dc2484d42218848e2d42cd9c0b13a1b92e94ea19b209f7e91c875c208d8409
* Initial devnet
* Move genesis block adding into its own method
* Introduce -allowprivatenet to lift limitation on RFC1918 addresses
Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed
to be relayed. Also, masternodes won't start when the address is considered
invalid.
This is needed to test local devnet or regtest based networks.
* Lift the requirement of minimum MN age for regtest/devnet
* Implement named devnets
This allows the creation of multiple independent devnets. Each one is
identified by a name which is hardened into a "devnet genesis" block,
which is automatically positioned at height 1. Validation rules will
ensure that a node from devnet=test1 never be able to accept blocks
from devnet=test2. This is done by checking the expected devnet genesis
block.
The genesis block of the devnet is the same as the one from regtest. This
starts the devnet with a very low difficulty, allowing us to fill up
needed balances for masternodes very fast.
Also, the devnet name is put into the sub-version of the VERSION message.
If a node connects to the wrong network, it will immediately be disconnected.
* Allow to select multiple addresses from the same group in devnet/regtest
The selection code normally only allows to select addresses from the same
group (e.g. 192.168.x.x) once. This results in connecting to only a single
node in devnet/regtest.
* Show the devnet name in the title bar and on the loading screen
* Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp
* Remove unused/unneeded scripts from devnet geneses creation
1. OP_RETURN not needed in input script of devnet genesis
2. genesisOutputScript was unused
* Fix copy/paste error in -allowprivatenet description
* Improve -devnet parameter error handling
- Only allow one of -devnet, -regtest or -testnet
- Only allow -devnet=name to be specified once
* Use different datadir for each devnet
* Fix `devnet-devnet` issue
* Fix devnet splashscreen (should use testnet img)
* Avoid passing devNetName around (most of the time)
* Remove nMaxTipAge from CDevNetParams
Not present anymore after rebase on develop
* net: Split resolving out of CNetAddr
* net: Split resolving out of CService
* net: Split resolving out of CSubNet
* net: move CNetAddr/CService/CSubNet out of netbase
* net: narrow include scope after moving to netaddress
Net functionality is no longer needed for CAddress/CAddrman/etc. now that
CNetAddr/CService/CSubNet are dumb storage classes.
* net: Add direct tests for new CSubNet constructors
* net: Have LookupNumeric return a CService directly
Also fix up a few small issues:
- Lookup with "badip:port" now sets the port to 0
- Don't allow assert to have side-effects
* net: fixup nits
* net: require lookup functions to specify all arguments
To make it clear where DNS resolves are happening
* net: manually resolve dns seed sources
Note: Some seeds aren't actually returning an IP for their name entries, so
they're being added to addrman with a source of [::].
This commit shouldn't change that behavior, for better or worse.
* net: resolve outside of storage structures
Rather than allowing CNetAddr/CService/CSubNet to launch DNS queries, require
that addresses are already resolved.
This greatly simplifies async resolve logic, and makes it harder to
accidentally leak DNS queries.
* net: disable resolving from storage structures
CNetAddr/CService/CSubnet can no longer resolve DNS.
* net: a few small cleanups before replacing boost threads
- Drop the interruption point directly after the pnode allocation. This would
be leaky if hit.
- Rearrange thread creation so that the socket handler comes first
* net: add CThreadInterrupt and InterruptibleSleep
* net: make net interruptible
Also now that net threads are interruptible, switch them to use std
threads/binds/mutexes/condvars.
* net: make net processing interruptible
* net: remove thread_interrupted catch
This is now a std::thread, so there's no hope of catching a boost interruption
point.
* net: make proxy receives interruptible
* net: misc header cleanups
51696ac make use of getnameinfo() optional (default: true)
bec39b8 fix mnb sig bug for ipv6 addresses: use pure byte to hex conversion for construction of masternode broadcast signature, better logging
Starting with Tor version 0.2.7.1 it is possible, through Tor's control socket
API, to create and destroy 'ephemeral' hidden services programmatically.
https://stem.torproject.org/api/control.html#stem.control.Controller.create_ephemeral_hidden_service
This means that if Tor is running (and proper authorization is available),
bitcoin automatically creates a hidden service to listen on, without user
manual configuration. This will positively affect the number of available
.onion nodes.
- When the node is started, connect to Tor through control socket
- Send `ADD_ONION` command
- First time:
- Make it create a hidden service key
- Save the key in the data directory for later usage
- Make it redirect port 8333 to the local port 8333 (or whatever port we're listening on).
- Keep control socket connection open for as long node is running. The hidden service will
(by default) automatically go away when the connection is closed.
According to Tor's extensions to the SOCKS protocol
(https://gitweb.torproject.org/torspec.git/tree/socks-extensions.txt)
it is possible to perform stream isolation by providing authentication
to the proxy. Each set of credentials will create a new circuit,
which makes it harder to correlate connections.
This patch adds an option, `-proxyrandomize` (on by default) that randomizes
credentials for every outgoing connection, thus creating a new circuit.
2015-03-16 15:29:59 SOCKS5 Sending proxy authentication 3842137544:3256031132
We've chosen to htons/ntohs explicitly on reading and writing
(I do not know why). But as READWRITE already does an endian swap
on big endian, this means the port number gets switched around,
which was what we were trying to avoid in the first place. So
to make this compatible, serialize it as FLATDATA.
- Made masternodes/darksend compatible with regression testing mode (a local-only blockchain that doesn't require mining). Developers can now test multiple rounds in a few minutes without waiting on mining (much faster).
- Added dsee security verification to v11
- darkSendMasternodes -> vecMasternodes (must clearer)
This avoids connecting to them again too soon in ThreadOpenConnections.
Make an exception for connection failures to the proxy as these
shouldn't affect the status of specific nodes.
Thanks to Pieter Wuille for most of the work on this commit.
I did not fixup the overhaul commit, because a rebase conflicted
with "remove fields of ser_streamplaceholder".
I prefer not to risk making a mistake while resolving it.
The implementation of each class' serialization/deserialization is no longer
passed within a macro. The implementation now lies within a template of form:
template <typename T, typename Stream, typename Operation>
inline static size_t SerializationOp(T thisPtr, Stream& s, Operation ser_action, int nType, int nVersion) {
size_t nSerSize = 0;
/* CODE */
return nSerSize;
}
In cases when codepath should depend on whether or not we are just deserializing
(old fGetSize, fWrite, fRead flags) an additional clause can be used:
bool fRead = boost::is_same<Operation, CSerActionUnserialize>();
The IMPLEMENT_SERIALIZE macro will now be a freestanding clause added within
class' body (similiar to Qt's Q_OBJECT) to implement GetSerializeSize,
Serialize and Unserialize. These are now wrappers around
the "SerializationOp" template.
- ensures a consistent usage in header files
- also add a blank line after the copyright header where missing
- also remove orphan new-lines at the end of some files
Simpler alternative to #4348.
The current setup with closesocket() is strange. It poses
as a compatibility wrapper but adds functionality.
Rename it and make it a documented utility function in netbase.
Code movement only, zero effect on the functionality.
bitcoin-config.h moved, but the old file is likely to still exist when
reconfiguring or switching branches. This would've caused files to not rebuild
correctly, and other strange problems.
Make the path explicit so that the old one cannot be found.
Core libs use config/bitcoin-config.h.
Libs (like crypto) which don't want access to bitcoin's headers continue
to use -Iconfig and #include bitcoin-config.h.
