c1be285 chainparams: make supported service bits option explicit (Cory Fields)
d5c7c1c net: use an internal address for fixed seeds (Cory Fields)
6cdc488 net: switch to dummy internal ip for dns seed source (Cory Fields)
6d0bd5b net: do not allow resolving to an internal address (Cory Fields)
7f31762 net: add an internal subnet for representing unresolved hostnames (Cory Fields)
Tree-SHA512: 9bf1042bef546ac3ef0e0d3a9a5555eb21628ff2674a0cf8c6367194b22bfdab477adf452c0e7c56f44e0fb37debc5e14bdb623452e076fb9c492c7702601d7a
* Remove ppszTypeName from protocol.cpp and reimplement GetCommand
This removes the need to carefully maintain ppszTypeName, which required
correct order and also did not allow to permanently remove old message
types.
To get the command name for an INV type, GetCommandInternal uses a switch
which needs to be maintained from now on.
The way this is implemented also resembles the way it is implemented in
Bitcoin today, but it's not identical. The original PR that introduced the
switch case in Bitcoin was part of the Segwit changes and thus never got
backported. I decided to implement it in a slightly different way that
avoids throwing exceptions when an unknown INV type is encountered.
IsKnownType will now also leverage GetCommandInternal() to figure out if
the INV type is known locally. This has the side effect of old/legacy
message types to return false from now on. We will depend on this side
effect in later commits when we remove legacy InstantSend code.
* Stop handling/relaying legacy IX messages
When we receive an IX message, we simply treat it as a regular TX and relay
it as such.
We'll however still request IX messages when they are announced to us. We
can't simply revert to requesting TX messages in this case as it might
result in the other peer not answering due to the TX not being in mapRelay
yet. We should at some point in the future completely drop handling of IX
messages instead.
* Remove IsNewInstantSendEnabled() and only use IsInstantSendEnabled()
* Remove legacy InstantSend from GUI
* Remove InstantSend from Bitcoin/Dash URIs
* Remove legacy InstantSend from RPC commands
* Remove legacy InstantSend from wallet
* Remove legacy instantsend.h include
* Remove legacy InstantSend from validation code
* Completely remove remaining legacy InstantSend code
* Remove now unused spork
* Fix InstantSend related test failures
* Remove now obsolete auto IS tests
* Make spork2 and spork3 disabled by default
This should have no influence on mainnet as these sporks are actually set
there. This will however affect regtest, which shouldn't have LLMQ based
InstantSend enabled by default.
* Remove instantsend tests from dip3-deterministicmns.py
These were only testing legacy InstantSend
* Fix .QCheckBox#checkUsePrivateSend styling a bit
* s/TXLEGACYLOCKREQUEST/LEGACYTXLOCKREQUEST/
* Revert "verified via InstantSend" back to "verified via LLMQ based InstantSend"
* Use cmd == nullptr instead of !cmd
* Remove last parameter from AvailableCoins call
This was for fUseInstantSend which is not present anymore since rebase
3fb81a8 Use list initialization (C++11) for maps/vectors instead of boost::assign::map_list_of/list_of (practicalswift)
Tree-SHA512: 63a9ac9ec5799472943dce1cd92a4b14e7f1fe12758a5fc4b1efceaf2c85a4ba71dad5ccc50813527f18b192e7714c076e2478ecd6ca0d452b24e88416f872f7
c1082a7 Chainparams: Use the factory for pow tests (Jorge Timón)
2351a06 Chainparams: Get rid of CChainParams& Params(std::string) (Jorge Timón)
f87f362 Chainparams: Use a regular factory for creating chainparams (Jorge Timón)
Tree-SHA512: 359c8a2a1bc9d02db7856d02810240ada28048ac088f878b575597a7255cdb0ffdd1a647085ee67a34c6a7e7ed9e6cfdb61240cf6e75139619b640dbb096072c
* Bump nMinimumChainWork and defaultAssumeValid for mainnet
Signed-off-by: Pasta <Pasta@dash.org>
add back 0x
Signed-off-by: Pasta <Pasta@dash.org>
* Bump nMinimumChainWork and defaultAssumeValid for testnet
Signed-off-by: Pasta <Pasta@dash.org>
add back 0x 2nd time
Signed-off-by: Pasta <Pasta@dash.org>
* Add a checkpoint for 0.14
Signed-off-by: Pasta <Pasta@dash.org>
* add testnet checkpoint 0.14
Signed-off-by: Pasta <Pasta@dash.org>
* update mainnet ChainTxData
Signed-off-by: Pasta <Pasta@dash.org>
formatting fix mainnet chaintxdata
Signed-off-by: Pasta <Pasta@dash.org>
update mainnet ChainTxData to specific block
Signed-off-by: Pasta <Pasta@dash.org>
* update testnet chainTxData
Signed-off-by: Pasta <Pasta@dash.org>
update testnet ChainTxData to specific block
Signed-off-by: Pasta <Pasta@dash.org>
And for llmq5_60, set it to 3 instead of 24 (which was incorrect from the
beginning).
Increasing all LLMQs "keepOldConnections" by one is required because we
don't use the tip when scanning active quorums, but a block that is 8 blocks
in the past. This however means that we need to keep connections for one
additional quorum alive.
This fixes an issue with signing sessions randomly failing with timeouts.
* Trivial: vout->txout
* Re-use SetHexStr in few more places
* Tweak log output
* fix v13 release notes links
* Drop no longer used stuff
* Few more trivial fixes
* Adjust few rpc help strings
* Apply review suggestions
* Harden DIP3 activation height
Also drop all related but no longer used parts.
* Pass current block index to GetCommitmentsFromBlock
* Allow to change dip3 activation height for tests
And fix them.
On testnet it's quite usual to have multiple MNs on the same IP. Now that
we have LLMQs and DKGs which require deterministic intra quorum connections,
we must allow them to connect to each other even if the IPs are shared very
often.
* Require only 3 out of 5 signatures for old InstantSend in regtest mode
* Use LLMQs of size 5 with threshold of 3 for regtest
* Fix wrong check for out-of-range bits in CFixedBitSet
* Reduce number of masternodes in masternode/LLMQ tests
* Add missing \n to LogPrintf call
* Use correct indexes for isolated/receiver/sender nodes
The way it was before resulted in nodes 1-3 being unused and 6-8 being used
for these 3 special nodes even though these are masternodes.
* Avoid stopping/starting isolated node in p2p-instantsend.py
It's enough to disable networking for this node.
* Indicate success when signing was unnecessary
* Fix typo in name of LLMQ_400_60
* Move RemoveAskFor call for CLSIGs into ProcessNewChainLock
In case we got INV items for the same CLSIG that we recreated through
HandleNewRecoveredSig, (re-)requesting of the CLSIG from other peers
becomes unnecessary.
* Move Cleanup() call in CChainLocksHandler::UpdatedBlockTip up
We bail out early in a few situations from this method, so that Cleanup()
might not be called while its at the bottom.
* Bail out from CChainLocksHandler::UpdatedBlockTip if we already got the CLSIG
* Call RemoveAskFor when QFCOMMITMENT was received
Otherwise we might end up re-requesting it for a very long time when the
commitment INV was received shortly before it got mined.
* Call RemoveSigSharesForSession when a recovered sig is received
Otherwise we end up with session data in node states lingering around until
a fake "timeout" occurs (can be seen in the logs).
* Better handling of false-positive conflicts in CSigningManager
The old code was emitting a lot of messages in logs as it treated sigs
for exactly the same session as a conflict. This commit fixes this by
looking at the signHash before logging.
Also handle a corner-case where a recovered sig might be deleted between
the HasRecoveredSigForId and GetRecoveredSigById call.
* Don't run into session timeout when sig shares come in slow
Instead of just tracking when the first share was received, we now also
track when the last (non-duplicate) share was received. Sessios will now
timeout 5 minutes after the first share arrives, or 1 minute after the last
one arrived.
Instead of trying to manually figure out params for different quorum/ring sizes, connect to nodes at indexes (i+2^k)%n where k: 0..floor(log2(n-1))-1, n: size of the quorum/ring
* Move llmqChainLocks initialization closer to other LLMQ related assignments
* Use smaller LLMQs for ChainLocks on testnet and devnet
We very often don't have enough MNs on testnet so we should use a smaller
quorum quorum for ChainLocks.
* Implement copy_datadir to allow easy copying of state from one node to another
* Instead of starting with a fresh datadir for MNs, reuse a copy of the faucet
* Start masternodes in parallel instead of waiting for the previous to finish
* Allow specifying of window and threshold with -bip9params
* Implement -dip3activationheight for regtests
* Implement fast DIP3 activation in DashTestFramework
* Speed up activation of DIP3 in dip3-deterministicmns.py
* Update qa/rpc-tests/test_framework/test_framework.py
Co-Authored-By: codablock <ablock84@gmail.com>
* Always assign fast_dip3_activation
* Replace IsDeterministicMNsSporkActive with IsDIP3Active
IsDIP3Active will now use a fixed parameter from consensus params.
Values for DIP0003Height/DIP0003Hash need to be updated when spork15
activates on mainnet.
Also enforce correct block hash on testnet/mainnet for DIP3 activation
block.
* Remove SPORK_15_DETERMINISTIC_MNS_ENABLED
* Replace all uses of IsDeterministicMNsSporkActive with IsDIP3Active
* Remove DIP3 upgrade-path tests and directly start with DIP3 enabled tests
* Make -masternodeprivkey non-mandatory
This code will vanish later.
* Add SPORK_17_QUORUM_DKG_ENABLED spork
* Implement CDummyDKG and CDummyCommitment until we have the real DKG merged
This is only used on testnet/devnet/regtest and will NEVER be used on
mainnet. It is NOT SECURE AT ALL!
See comment in quorums_dummydkg.h for more details.
* Test simple PoSe in DIP3 tests
* Generate 2 instead of 4 blocks per iteration in PoSe tests
4 was based on old chainparams where I used larger phases.
* Only sleep when necessary in PoSe tests
* Fix typo in comment
* Give PoSe tests more time and sync after fast-forward
* Add LLMQ parameters to consensus params
* Add DIP6 quorum commitment special TX
* Implement CQuorumBlockProcessor which validates and handles commitments
* Add quorum commitments to new blocks
* Propagate QFCOMMITMENT messages to all nodes
* Allow special transactions in blocks which have no inputs/outputs
But only for TRANSACTION_QUORUM_COMMITMENT for now.
* Add quorum commitments to self-crafted blocks in DIP3 tests
* Add simple fork logic for current testnet
This should avoid a fork on the current testnet. It only applies to the
current chain which activated DIP3 at height 264000 and block
00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f.
When we revert the chain to retest the DIP3 deployment, this fork logic
can be removed again.
* Use quorumVvecHash instead of quorumHash to make null commitments unique
Implementation of https://github.com/dashpay/dips/pull/31
* Re-add quorum commitments after pruning mempool selected blocks
* Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements
Also add BEGIN/END markers for temporary code.
* Add comments/documentation to LLMQParams
* Move code which determines if a commitment is required into IsCommitmentRequired
This should make the code easier to read and also removes some duplication.
The also changes the error types that are possible from 3 to 2 now. Instead
of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is
only "bad-qc-not-allowed" now.
* Use new parameter from consensus parames for the temporary fork
* Properly initialize confirmedHash in CSimplifiedMNListEntry
* Add consensus params for temporary hard-fork on testnet
This hard-fork is required on testnet as we have to fix a few consensus
bugs in DIP3/DIP4. It will also be required to introduce LLMQ commitments
to testnet.
* Add temporary fork-logic for testnet, which sets confirmedHash to null
...before fork activation. Otherwise we'd invalidate all DIP3 blocks on
testnet.
* Bump nTemporaryTestnetForkHeight to 273000
* Update defaultAssumeValid and nMinimumChainWork for mainnet
* Update defaultAssumeValid and nMinimumChainWork for testnet
* Add checkpoint for mainnet
* Add checkpoint for testnet
* Add BIP9 parameters for DIP3 deployment on testnet
* Remove autoix BIP9 deployment and reuse DIP3 deployment
* Add BIP9CheckMasternodesUpgraded to chain params
This controls if miners should check for upgraded masternodes first before
adding BIP9 bits to the block version. This only makes sense in network
where masternodes are up and running before BIP9 activation, which is not
necessarely the case in regtest and devnet.
Also refactor ComputeBlockVersion to use fCheckMasternodesUpgraded instead
of the inverse fAssumeMasternodeIsUpgraded. It is set to false by default
and only set to true in CreateNewBlock.
* Check for upgraded masternodes for DIP3 activation (only mainnet and testnet)
* Bump PROTOCOL_VERSION and DMN_PROTO_VERSION
We probably have nodes with 70211 already running on testnet.
* Clear devNetParams and mimic behavior of other param types
Mainnet, testnet and regtest params are global and thus zero initialized,
we should mimic the same for devnet params.
Not doing so results in all kinds of issues on devnet.
* Remove unnecessary <string.h> includein chainparamsbase.cpp
* Allow to use low difficulty and higher block rewards for devnet
Configurable through -minimumdifficultyblocks, -highsubsidyblocks and -highsubsidyfactor
* Fix review comments
* Handle review comments
* support set of keys to sign spork
* several addresses support in -sporkkey
* tests for multykey sporks
* command line option -minsporkkeys
* make spork active only after given number of signers
* use signature in spork hash calculation
* test for new and old spork messages interaction
* add multikeyspork.py to integration tests
* change test to have ability to distinguish default spork value
* require min spork keys number to be more than the half of the common spork keys number
* calc current spork value with majority of signers
* set test nodes time in integration test
* extract keyid from signed spork message directly
* change -sporkaddr option syntax to process several addresses
* codestyle fixes
* fix test comments
* codestyle fixes
* simplify CSporkManager::SporkValueIsActive
* Calc signature hash without signature field
* do not restore pubkey ids from cach
* Calc different keyids to check signature because not all sporks can be synced at moment
* codestyle fixes
* Fix CSporkManager::CheckAndRemove to use several keys
* codestyle fixes
* Correct processing of not actual spork6 value with GetSignerKeyID
* add locktransaction rpc call
* Remove special instantsend fee for simple transactions
* Function to check if trx is simple enough to be autolocked
* Automatic lock for all received from peers simple trxes
If we get a new transaction with CInv message and it is "simple" and
is accepted in mempool, we initiate its lock. We don't lock orphan trxes
that accepted in mempool after this trx because they are locked by other
peers.
* Automatically lock simple trxes in wallet
* protocol bump for InstantSend without special fee
* Add function to detect used mempool share
* Mempool threshold for auto IX locks
* Add SPORK_16_INSTANTSEND_AUTOLOCKS spork
* Make autolocks active only when spork SPORK_16_INSTANTSEND_AUTOLOCKS is active
* BIP9 autolocks activation
* revert increasing min peer protocol version for mn rank
* move IsTrxSimple check to CTxLockRequest class
* make MAX_INPUTS_FOR_AUTO_IX private member of CTxLockRequest class
* make AUTO_IX_MEMPOOL_THRESHOLD private member of CInstantSend class
* remove locktransaction RPC call
* tests for automatic IS locks
* fix mempool threshod calculation
* bump mocktime in activate_autoix_bip9
* set node times
* no need to spam the node with gettransaction rpc requests that often
* use `spork active` instead of leaking spork logic into tests
* codestyle fixes
* add test description in comments
* fix typo
* sync test nodes more often during BIP9 activation
* Use 4th bit in BIP9 activation
* Fix comments according codestyle guide
* Call AcceptLockRequest and Vote at the first node creating autoix lock
* fix mempool used memory calculation
* rallback not necessary change in CWallet::CreateTransaction
* test for stopping autolocks for full mempool
* Inject "simple autolockable" txes into txlockrequest logic
* Allow changing budget parameters for regtest
* Lift some limitations for local addresses for masternodes in regtest
Needed to make masternodes works in regtest mode
* Add "masternode check" RPC to force invocation of CheckAndRemove
Useful in integration tests where MN lists must be predictable
* Remove testnet seeds from devnet
* Lift multiple ports restriction on devnet when considering new nodes
Allow to connect to multiple nodes behind the same IP
* Don't skip addresses with non-default port if it matches -port
If the user specified -port, he very likely intends to connect to nodes
with the same port.
* Don't pass false to CAddrMan constructor as it is already the default
* Make if statements easier to read
* Fix transaction/block versions for devnet genesis blocks
56ff71fcec mistakenly increased the coinbase transaction version instead
of the block version. This fixes it.
* Use v1 for coinbase transaction
* Drop custom logic for delaying GETHEADERS
Reverts "Fix duplicate headers download in initial sync (#1589)" and all following fixes
This reverts commit 169afafd50.
* Fix duplicate initial headers sync
* Make sure gobject collateral was mined
`CGovernanceObject::IsCollateralValid()` would still fail for non-mined collateral later trying to check confirmations
* Fix powLimit for mainnet/testnet
That's a legacy thing, slightly rising it to match the actual bit-shifted value has no effect because real values are already lower.
Also clarify values for all networks in comments.
* Check for script addresses in CSuperblock::ParsePaymentSchedule()
Sentinel should already be downvoting such triggers if they would exist, no need to store/relay them.
* Do not process already known valid vote twice in CGovernanceObject::ProcessVote()
This should be handled by `CGovernanceManager::ProcessVote()` but imo it's better to have this at the `CGovernanceObject::ProcessVote()` level as well.
* Make sure CGovernanceObjectVoteFile::AddVote() never adds/updates already known votes
The way `CGovernanceObjectVoteFile::AddVote()` is used (i.e. wrapped in `CGovernanceObjectVoteFile::HasVote()` condition) it's already the case. Hoever nothing would guarantee consistency if it would be used elsewhere without such wrapper, so it's better to have similar check inside.
* Do not even try mnb recovery when -connect is set
`CConnman::ThreadOpenMasternodeConnections()` thread won't even start when `-connect` is set, so no need to ask for recovery, there is nothing that is going to be able to process such request.
* No need for SIGHASH_ANYONECANPAY in PS collateral signature
Collateral is just a normal tx created and signed by each participant individually, there is no need for special sig types.
* Release semMasternodeOutbound in CConnman::Interrupt()
Re-align Dash code with Bitcoin.
* Switch CNetFulfilledRequestManager and CMasternodeMan maps/funcs to CService
This is to make them work correctly on regtest.
We make sure that behaviour on other networks is not affected though.
* Add fAllowMultiplePorts to chainparams
Tweak either we should allow nodes with the same address and multiple ports or not for this specific chain
* Support passing CKeyID to CMessageSigner/CHashSigner
* Use Dash addresses instead of raw public keys for sporks
The spork addresses are identical to the previously used public keys.
Also use CKeyID/CKey directly inside CSporkManager instead of parsing the
addresses/keys over and over. The default spork key (from chainparams) is
initialized with InitDefaultSporkAddress(). SetPrivKey parses the private
key now and stores it in sporkPrivKey instead of parsing it in
CSporkMessage::Sign().
* Allow setting of spork address via command line
* Remove unused strMasternodePaymentsPubKey chainparam
Traces from the past...
* Review fixes
1. Remove the need for InitDefaultSporkAddress
2. Remove bogus checks for hex private keys
3. Alphabetical order for new include
4. Add . to help string
* Add regtest spork key
As this key is not meant to be private, the private key is also added in
the form of a comment (for later use in regtests)
* Review fixes
* Add missing help string for -devnet
* Remove testnet seeds from devnet
* Activate BIP34/65/66 at height 2 instead of 1
Height 1 is the genesis block and not the devnet genesis block. The genesis
block is still at version 1, resulting in re-indexing to fail.
* Drop nBudgetProposalEstablishingTime
* Refactor: replace `== COutPoint()` with `.IsNull()`
* Refactor: add `operator bool()` to CMasternodePing
* Refactor: actually use `operator bool()` for CPendingDsaRequest
* Refactor: fixing code style in TrafficGraphData
* Fix some comments and whitespaces
* Drop CGovernanceVote::GetTypeHash()
* Drop legacy X11 code
No longer used... if it ever was used at all.
* Move `<boost/foreach.hpp>` out of coins.h
* Simplify CMasternodeBlockPayees::GetRequiredPaymentsString()
Also less of boost::lexical_cast
* Drop CTxDSIn::nSentTimes
* Fix few warnings
* fix warning (timer)
* fix nit
* Use Dash block for DeserializeAndCheckBlockTest
Replaced Bitcoin block with the largest Dash block I could find on mainnet.
* Store hashDevnetGenesisBlock in Consensus::Params
Remove the need for chainparams to be available when the devnetGenesis hash
is needed. Fixes a crash in CheckBlockHeader() when called from benchmarking
code, which does not initialize the Params() function.
b4e4ba4 Introduce convenience type CTransactionRef (Pieter Wuille)
1662b43 Make CBlock::vtx a vector of shared_ptr<CTransaction> (Pieter Wuille)
da60506 Add deserializing constructors to CTransaction and CMutableTransaction (Pieter Wuille)
0e85204 Add serialization for unique_ptr and shared_ptr (Pieter Wuille)
* Initial devnet
* Move genesis block adding into its own method
* Introduce -allowprivatenet to lift limitation on RFC1918 addresses
Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed
to be relayed. Also, masternodes won't start when the address is considered
invalid.
This is needed to test local devnet or regtest based networks.
* Lift the requirement of minimum MN age for regtest/devnet
* Implement named devnets
This allows the creation of multiple independent devnets. Each one is
identified by a name which is hardened into a "devnet genesis" block,
which is automatically positioned at height 1. Validation rules will
ensure that a node from devnet=test1 never be able to accept blocks
from devnet=test2. This is done by checking the expected devnet genesis
block.
The genesis block of the devnet is the same as the one from regtest. This
starts the devnet with a very low difficulty, allowing us to fill up
needed balances for masternodes very fast.
Also, the devnet name is put into the sub-version of the VERSION message.
If a node connects to the wrong network, it will immediately be disconnected.
* Allow to select multiple addresses from the same group in devnet/regtest
The selection code normally only allows to select addresses from the same
group (e.g. 192.168.x.x) once. This results in connecting to only a single
node in devnet/regtest.
* Show the devnet name in the title bar and on the loading screen
* Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp
* Remove unused/unneeded scripts from devnet geneses creation
1. OP_RETURN not needed in input script of devnet genesis
2. genesisOutputScript was unused
* Fix copy/paste error in -allowprivatenet description
* Improve -devnet parameter error handling
- Only allow one of -devnet, -regtest or -testnet
- Only allow -devnet=name to be specified once
* Use different datadir for each devnet
* Fix `devnet-devnet` issue
* Fix devnet splashscreen (should use testnet img)
* Avoid passing devNetName around (most of the time)
* Remove nMaxTipAge from CDevNetParams
Not present anymore after rebase on develop
