* Fix CPrivateSendServer::IsSessionReady()
Also move it to cpp
* Make sure nSessionMaxParticipants is initialized properly
* Adjust logging
* adjust log a bit more
* Fixes from Bitcoin #12474
This commit fixes building of boost and openssl on armv7l as described in Bitcoin issue #12474
* Prevent compiler from emitting illegal instructions to armv7l CPUs
* Limit dwsize for armv7l
* Remove superfluous cppflags argument
* Split up remaining logic from CMasternodeMan into CMasternodeMetaMan and CMasternodeUtils
Also get rid of CMastermode and store remaining meta info
in CMasternodeMetaInfo
* Also allow non-const T in Serialize/Unserialize for shared_ptr
* Rename CActiveDeterministicMasternodeManager to CActiveMasternodeManager
* Fix nowallet compile in masternode-utils.cpp
* Implement IsMockTime to test for mock time
* Add real timestamp to log output when mock time is enabled
This makes debugging on Travis easier as it gives a hint about timing
behavior.
* Announce blocks as HEADERS instead of INV in comptool
Announcing as INV results in one GETHEADERS message per INV item with
every GETHEADERS containing the same block locator info. This in turn
results in many (1088 in p2p-fullblocktests) replies with each having i+1
headers. As every message is sent in one go, the message processing queue
gets overloaded, leading to GETDATA timeouts for blocks and thus failing
the tests.
Announcing the blocks directly with HEADERS avoids all this and results in
one GETDATA per announced header.
This will later conflict with backported improvements from Bitcoin. When we
get to this point, we can simply ignore changes on Dash's side and take
the improvements from Bitcoin (which also switch to header announcement,
but after some refactorings)
* Give wait_for_pings more time
Large reorgs as in the p2p-fullblocktest can cause very long long delays
for the ping that we're waiting for. This was not a problem before #2593,
as before this wait_until was waiting forever.
* Send larger amounts for IX
* Don't use node0 as sender of IX transactions
node0 tends to have many small UTXOs which result in TXs with many inputs
and high CPU usage.
* Merge #9744: Remove unused module from rpc-tests
a432aa0 Remove unused module from rpc-tests (Takashi Mitsuta)
* Merge #9696: [trivial] Fix recently introduced typos in comments
0c9b9b7 [trivial] Fix recently introduced typos in comments (practicalswift)
* Merge #9657: Improve rpc-tests.py
a6a3e58 Various review markups for rpc-tests.py improvements (John Newbery)
3de3ccd Refactor rpc-tests.py (John Newbery)
afd38e7 Improve rpc-tests.py arguments (John Newbery)
91bffff Use argparse in rpc_tests.py (John Newbery)
1581ecb Use configparser in rpc-tests.py (John Newbery)
* Merge #9724: Qt/Intro: Add explanation of IBD process
f6d18f5 Qt/Intro: Explain a bit more what will happen first time (Luke Dashjr)
50c5657 Qt/Intro: Storage shouldn't grow significantly with pruning enabled (Luke Dashjr)
9adb694 Qt/Intro: Move sizeWarningLabel text into C++ code (Luke Dashjr)
* Merge #9794: Minor update to qrencode package builder
1bfe6b4 Use package name variable inside $(package)_file_name variable (Mitchell Cash)
* Merge #9726: netbase: Do not print an error on connection timeouts through proxy
3ddfe29 netbase: Do not print an error on connection timeouts through proxy (Wladimir J. van der Laan)
13f6085 netbase: Make InterruptibleRecv return an error code instead of bool (Wladimir J. van der Laan)
* Merge #9727: Remove fallbacks for boost_filesystem < v3
056aba2 Remove fallbacks for boost_filesystem < v3 (Wladimir J. van der Laan)
* Merge #9485: ZMQ example using python3 and asyncio
b471daf Adddress nits, use asyncio signal handling, create_task (Bob McElrath)
4bb7d1b Add python version checks and 3.4 example (Bob McElrath)
5406d51 Rewrite to not use Polling wrapper for asyncio, link to python2.7 example (Bob McElrath)
5ea5368 ZMQ example using python3 and asyncio (Bob McElrath)
* Merge #9807: RPC doc fix-ups.
851f6a3 [qa][doc] Correct rpc test options in readme (fanquake)
41e7219 [trivial] Add tests_config.ini to .gitignore (fanquake)
* Dashify
Co-Authored-By: PastaPastaPasta <pasta@dashboost.org>
* Change file permissions
* update travis.yml -parallel -> --jobs
* Remove CActiveLegacyMasternodeManager
* Remove sentinelping RPC
* Remove unused P2P messages and inv types
There are still places where these are used in the code. The next commits
will clean these up.
* Remove MNB/MNP/MNVERIFY related code from masternode(man).h/cpp
* Remove all legacy code regarding block MN payee voting
* Remove MASTERNODE_SYNC_LIST and MASTERNODE_SYNC_MNW states
Also replace all uses of IsMasternodeListSynced and IsWinnersListSynced
with IsBlockchainSynced.
* Remove unsupported masternode RPCs
* Remove UpdateLastPaid methods
* Remove duplicate deterministicmns.h include
* Remove masternode.conf support
* Remove legacy MN lists support from masternode list GUI
* Remove unnecessary AskForMN call
* Remove compatibility code in CPrivateSendQueue::GetSignatureHash
* Don't add locally calculated MN payee in case GetBlockTxOuts failed
This is not valid in DIP3 mode
* Remove check for IsDeterministicMNsSporkActive in "masternode status"
* Move CMasternode::IsValidNetAddr to CActiveDeterministicMasternodeManager
* Remove use of CMasternode::CheckCollateral in governance code
* Remove uses of MASTERNODE_SENTINEL_PING_MAX_SECONDS/MASTERNODE_SENTINEL_PING_MAX_SECONDS
* Remove support for "-masternodeprivkey"
* Remove pre-DIP3 vote cleanup
* Remove compatibility code for quorumModifierHash/masternodeProTxHash
* Remove check for invalid nBlockHeight in CMasternodePayments::GetBlockTxOuts
...and let it crash instead. We expect this method to be called with the
correct height now (after DIP3 was fully deployed).
* Remove ECDSA based Sign/CheckSignature from CGovernanceObject
Only masternodes sign governance objects, so there is no need for ECDSA
support here anymore.
* Always add superblock and MN reward payments into new block
* Always check block payees (except if fLiteMode==true)
* Always allow superblock and MN payees in same block
* Remove/Fix a few references to masternode.conf and related stuff
Also delete guide-startmany.md and masternode_conf.md
* Implement NotifyMasternodeListChanged signal and call governance maintenance
* Remove non-DIP3 code path from CMasternodeMan::Find
* Remove remaining unused code from CMasternode/CMasternodeMan
* Always load governance.dat on startup
* Mine an empty block instead of incrementing nHeight from chain tip in miner tests
This test is crashing otherwise in GetBlockTxOuts as it tries to access a
previous block that is not existing.
* Skip MN payments verification on historical blocks (pre-DIP3 blocks)
Even though DIP3 was active on BIP9 level, the spork was not active yet at
that point meaning that payments were not enforced at that time.
* Remove unused state and CollateralStatus enums
* Unconditionally return false from IsBlockPayeeValid when IsTransactionValid returns false
IsTransactionValid already handles the case where IsDIP3Active() returns
false, making it return true.
* Add override keyword to CDSNotificationInterface::NotifyMasternodeListChanged
* Fix help for masternodelist status (POSE_BANNED and no OUTPOINT_SPENT)
* Increment mocktime before setting new SPORK_16_INSTANTSEND_AUTOLOCKS value
Otherwise nodes will not update sporks as they use the same timestamps.
* Disable autoix while filling mempool
* Retest autoix and regular ix after clearing mempool
1. Make strMode lower case before comparing it (keyIDXXX would otherwise
be case sensitive, leading to confusion for users)
2. Remove "rank" and "keyid" mode from help
3. Add keyIDOwner/keyIDVoting/pubKeyOperator to help and strMode check
4. Remove "pubkey" from strMode check
5. Call ToString() on address instead of whole DMN state
6. Add missing std::setw(10) to "full" mode
Additionally, implement GetLastDsq in CMasternodeMan as a replacement
for direct access to the masternode_info_t object. Will move this variable
to another (PS specific) place later.
