* Simple changes, mostly just includes
* Continued include changes combined with using pointers to avoid including more than necessary in headers
* remove dup include
* masternode-utils.cpp include net.h in all builds
* resolve linter -7 +11
* drop quorums.h from dkgsessionhandler.cpp
* Add `<utilstrencodings.h>`
* Initialize lastMNListForVotingKeys
* Refactor GetMinedCommitment to return sharedptr
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* governance/net: move protocol constants into version.h, drop GOVERNANCE_FILTER_PROTO_VERSION
Signed-off-by: pasta <pasta@dashboost.org>
* drop GOVERNANCE_FILTER_PROTO_VERSION
Signed-off-by: pasta <pasta@dashboost.org>
* move MIN_COINJOIN_PEER_PROTO_VERSION into version.h and adjust includes accordingly
Signed-off-by: pasta <pasta@dashboost.org>
* masternode: Fix mempool sync
Make sure the mempool sync requests only happen after the blockchain
sync is done.
* Refactor
Loop only if `-syncmempool`=true, make `if` a bit more readable
Co-authored-by: xdustinface <xdustinfacex@gmail.com>
* masternode: Replace sync states INITIAL and WAITING with BLOCKCHAIN
* masternode: Peer dependent "assume tip" timeout
I would say its enough to only wait 1 tick if we have more than 3
peers before we move over to governance sync.
* masternode: Notify the UI instantly if switched to governance sync
Without this it takes one iteration more for the UI to receive the
update.
* masternode: Notify the UI about CMasternodeSync::Reset calls
* masternode: Don't instantly reset the sync process
Give it MASTERNODE_SYNC_RESET_SECONDS (600) seconds time after the last
UpdateBlockTip call.
* rpc: Don't switch to next asset in "mnsync reset"
* rpc: Force the reset in "mnsync reset"
* net: Make sure the sync gets a reset if required after network changes
This will reset the sync process if its outdated in the following cases:
- If the connections dropped to zero
- If the connections went from zero to one
- If the network has been enabled or disabled
* Apply suggestions from code review
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* net: Only open masternode connections if the blockchain is synced
In general it doesn't make sense to connect to masternodes before due to
MNAUTH requires blockchain sync. This could lead to failing quorum
connections/failing masternode
probing.. if a just restarted node/a out of sync node
would hit a dkg block.. Then they would not try to open those
llmq/probing connections for the next 60s (nLLMQConnectionRetryTimeout).
Thats basically what happens in tests right now and they fail without
this commit.
* test: Make sure nodes are synced when they get restored after isolation
Their sync might be out of date otherwise due to bigger mocktime bumps
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Implement Block Reward Reallocation
* Add integr. test
* drop unused variable
* Sep -> Oct
* Update test/functional/feature_block_reward_reallocation.py
Co-authored-by: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
* Revert to Sep for testnet and devnet
* validation: Refactor reallocation calculations
Makes it much more readable imo and avoids calculating the percentage
each time.
* test: Align reallocation calculation with c++ (GetMasternodePayment)
* test: Make feature_block_reward_allocation.py executable
* Make linter happy
Co-authored-by: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
Co-authored-by: xdustinface <xdustinfacex@gmail.com>
* Mostly trivial clang-tidy changes in masternode
Signed-off-by: pasta <pasta@dashboost.org>
* uint -> size_t
Signed-off-by: pasta <pasta@dashboost.org>
* Make GetSyncStatus const not static and ProcessMessage const
Signed-off-by: pasta <pasta@dashboost.org>
* Change litemode to disablegovernance, this makes it more clear what that flag actually does.
Signed-off-by: pasta <pasta@dashboost.org>
* more fLiteMode to fDisableGovernance
Signed-off-by: pasta <pasta@dashboost.org>
* handle -litemode being set
Signed-off-by: pasta <pasta@dashboost.org>
* enable privatesend by default in litemode
Signed-off-by: Pasta <pasta@dashboost.org>
* remove useless litemode check in CPrivateSendServer::ProcessMessage, must be MN, so must have litemode off already
Signed-off-by: Pasta <pasta@dashboost.org>
* change litemode to mean, doesn't validate governance, but has all other dash features
Signed-off-by: Pasta <pasta@dashboost.org>
* litemode must be off for MNs cont
Signed-off-by: Pasta <pasta@dashboost.org>
* change litemode help text
Signed-off-by: Pasta <pasta@dashboost.org>
* don't skip MN sync in litemode
Signed-off-by: Pasta <pasta@dashboost.org>
* drop fLiteMode in bitcoingui.cpp
Signed-off-by: Pasta <pasta@dashboost.org>
* skip governance sync in litemode
Signed-off-by: pasta <pasta@dashboost.org>
* remove fLiteMode in walletview.cpp
Signed-off-by: pasta <pasta@dashboost.org>
* add back
Signed-off-by: pasta <pasta@dashboost.org>
* fix comments
* fix cache loading
* fix scheduled tasks
* Fix help text for some rpcs (revert what's left of 3478)
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Implement GetDsqThreshold to unify dsq rejection threshold calculations
* Use much simpler/lighter criteria to check if a candidate mixing MN is going to be paid in next 8 blocks
Drop CMasternodePayments::IsScheduled()
* Fix decomposition of txes with 2 outputs
Recognise creation of denoms for txes with 1 denom + 1 change
Fixes an issue introduced in #3347
* Tweak few labels
s/anonymize/mix/
* Prefer larger denoms when starting new mixing queues
Fixes an issue introduced in #3346
* Add an explanation about GetDsqThreshold
* Move GetDsqThreshold comment a bit higher
* Introduce SynchronousUpdatedBlockTip signal
This version of UpdatedBlockTip mirrors the asynchronous behavior that we
had before the introduction of asynchronous signal handling.
* Fix tab spacing in validationinterface.cpp
* Invoke CDeterministicMNManager::UpdatedBlockTip from validation thread
It must be invoked synchronously as otherwise things become inconsistent.
* Call CActiveMasternodeManager::Init with block index
pindexNew in UpdatedBlockTip is not necessarily the current tip, so we
shouldn't rely on it in Init(). This is due to the async nature of the
UpdatedBlockTip invocation.
* scripted-diff: Replace #include "" with #include <> (ryanofsky)
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* scripted-diff: Replace #include "" with #include <> (Dash Specific)
-BEGIN VERIFY SCRIPT-
for f in \
src/bls/*.cpp \
src/bls/*.h \
src/evo/*.cpp \
src/evo/*.h \
src/governance/*.cpp \
src/governance/*.h \
src/llmq/*.cpp \
src/llmq/*.h \
src/masternode/*.cpp \
src/masternode/*.h \
src/privatesend/*.cpp \
src/privatesend/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* build: Remove -I for everything but project root
Remove -I from build system for everything but the project root,
and built-in dependencies.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/Makefile.test.include
* qt: refactor: Use absolute include paths in .ui files
* qt: refactor: Changes to make include paths absolute
This makes all include paths in the GUI absolute.
Many changes are involved as every single source file in
src/qt/ assumes to be able to use relative includes.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/qt/dash.cpp
# src/qt/optionsmodel.cpp
# src/qt/test/rpcnestedtests.cpp
* test: refactor: Use absolute include paths for test data files
* Recommend #include<> syntax in developer notes
* refactor: Include obj/build.h instead of build.h
* END BACKPORT #11651 Remove trailing whitespace causing travis failure
* fix backport 11651
Signed-off-by: Pasta <pasta@dashboost.org>
* More of 11651
* fix blockchain.cpp
Signed-off-by: pasta <pasta@dashboost.org>
* Add missing "qt/" in includes
* Add missing "test/" in includes
* Fix trailing whitespaces
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: MeshCollider <dobsonsa68@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Create socket manually when self-checking masternode connectivity in Init
This is needed after backporting 11363 in 3305
* Check socket connectivity on regtest too
* Fix log output
* Merge #11117: Prepare for non-Base58 addresses
864cd2787 Move CBitcoinAddress to base58.cpp (Pieter Wuille)
5c8ff0d44 Introduce wrappers around CBitcoinAddress (Pieter Wuille)
Pull request description:
This patch removes the need for the intermediary Base58 type `CBitcoinAddress`, by providing {`Encode`,`Decode`,`IsValid`}`Destination` functions that directly operate on the conversion between `std::string`s and `CTxDestination`.
As a side, it also fixes a number of indentation issues, and removes probably several unnecessary implicit `CTxDestination`<->`CBitcoinAddress` conversions.
This change is far from complete. In follow-ups I'd like to:
* Split off the specific address and key encoding logic from base58.h, and move it to a address.h or so.
* Replace `CTxDestination` with a non-`boost::variant` version (which can be more efficient as `boost::variant` allocates everything on the heap, and remove the need for `boost::get<...>` and `IsValidDestination` calls everywhere).
* Do the same for `CBitcoinSecret`, `CBitcoinExtKey`, and `CBitcoinExtPubKey`.
However, I've tried to keep this patch to be minimally invasive, but still enough to support non-Base58 addresses. Perhaps a smaller patch is possible to hack Bech32 support into `CBitcoinAddress`, but I would consider that a move in the wrong direction.
Tree-SHA512: c2c77ffb57caeadf2429b1c2562ce60e8c7be8aa9f8e51b591f354b6b441162625b2efe14c023a1ae485cf2ed417263afa35c892891dfaa7844e7fbabccab85e
* CBitcoinAddress -> EncodeDestination in providertx.h
Signed-off-by: Pasta <pasta@dashboost.org>
* more CBitcoinAddress -> EncodeDestination in providertx.h
Signed-off-by: Pasta <pasta@dashboost.org>
* more CBitcoinAddress -> EncodeDestination in providertx.h
Signed-off-by: Pasta <pasta@dashboost.org>
* more CBitcoinAddress -> EncodeDestination in providertx.h
Signed-off-by: Pasta <pasta@dashboost.org>
* fix CBitcoinAddress GetKeyID check
Signed-off-by: Pasta <pasta@dashboost.org>
* fix providertx.cpp
Signed-off-by: Pasta <pasta@dashboost.org>
* hopefully fix governance-classes.cpp
Signed-off-by: Pasta <pasta@dashboost.org>
* partially fix governance-validators.cpp, unable to resolve "address.IsScript()"
Signed-off-by: Pasta <pasta@dashboost.org>
* partially fix governance-classes.cpp, unable to resolve "address.IsScript()"
Signed-off-by: Pasta <pasta@dashboost.org>
* fix governance-classes.h
Signed-off-by: Pasta <pasta@dashboost.org>
* DecodeTransaction -> DecodeDestination, fix governance-validators.cpp
Signed-off-by: Pasta <pasta@dashboost.org>
* More fixes for 3294
* Move GetIndexKey into rpc/misc.cpp near getAddressesFromParams
No need to have it in base58.cpp anymore as this is only used in getAddressesFromParams
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: Alexander Block <ablock84@gmail.com>
b887676 net: remove now-unused functions (Cory Fields)
45fd754 net: remove now-superfluous numeric resolve (Cory Fields)
2416dd7 net: separate resolving and conecting (Cory Fields)
Pull request description:
This is a greatly simplified version of #10285, which only aims to address async resolving.
It essentially breaks up two wrapper functions for things only used in one place (ConnectSocketDirectly/ConnectThroughProxy) in favor of calling them directly. This allows us to fully handle resolves before attempting a connection, as is necessary for async connections.
As a bonus, I believe the logic is now much easier to follow than before.
Tree-SHA512: f03f618107379edf3efe2a9f3e3677e8f075017ab140a0b4fdc3b8263e6beff148d55256263ab10bc2125ef089ca68e0d8e865beeae176f1eca544e769c976d3
ConnectSocket -> ConnectSocketDirectly
Signed-off-by: Pasta <pasta@dashboost.org>
* Sync mempool from other nodes on start
* Add `-syncmempool` cmd-line option to be able to disable mempool sync if needed
* Only sync mempool with outbound peers
Co-authored-by: Alexander Block <ablock84@gmail.com>
* Update activemn if protx info changed
* Add `==` and `!=` operators to CDeterministicMNState
* Only re-init active MN if its IP changed, changes to payout, voting etc. can be done without it
* Test `masternode status` updates
* Don't track mnListEntry anymore and instead get the DMN on demand
* Revert "Add `==` and `!=` operators to CDeterministicMNState"
This reverts commit fba4687581.
* Remove LogPrints which have been commented out.
We have version control systems for a reason, if we want code to not run it should be removed. I personally see no value in keeping these around. I presume at one point they were spamming debug.log so we commented them out, but we really should have just removed them.
I believe all of this is dash specific code but any conflicts this does create are so minor they are not of concern imo.
Signed-off-by: Pasta <pasta@dashboost.org>
* remove a couple of extra comments
Signed-off-by: Pasta <pasta@dashboost.org>
* remove commented out code
Signed-off-by: Pasta <pasta@dashboost.org>
* Implement CompactFull() in CDBWrapper
This allows to compact the whole DB in one go.
* Implement more compact version of CDeterministicMNListDiff
This introduces CDeterministicMNStateDiff which requires to only store
fields on-disk which actually changed.
* Avoid writing mnUniquePropertyMap to disk when storing snapshots
This map can be rebuilt by simply using AddMN for each deserialized MN.
* Implement Serialize/Unserialize in CScript
This allows us to directly use READWRITE() on scripts and removes the need
for the ugly cast to CScriptBase. This commit also changes all Dash specific
uses of CScript to not use the cast.
* Keep track of registeration counts and introduce internalID for masternodes
The "internalId" is simply the number of MNs registered so far when the
new MN is added. It is deterministic and stays the same forever.
* Use internalId as keys in MN list diffs
This reduces the used size on-disk.
* Two simple speedups in MN list diff handling
1. Avoid full compare if dmn or state pointers match in BuildDiff
2. Use std::move when adding diff to listDiff in GetListForBlock
* Implement upgrade code for old CDeterministicMNListDiff format to new format
* Track tipIndex instead of tipHeight/tipBlockHash
* Store and pass around CBlockIndex* instead of block hash and height
This allows us to switch CDeterministicMNManager::GetListForBlock to work
with CBlockIndex.
* Refactor CDeterministicMNManager::GetListForBlock to require CBlockIndex*
Instead of requiring a block hash. This allows us to remove blockHash and
prevBlockHash from CDeterministicMNListDiff without the use of cs_main
locks in GetListForBlock.
* Remove prevBlockHash, blockHash and nHeight from CDeterministicMNListDiff
* Remove access to determinisitcMNManager in CMasternodeMetaMan::ToString()
The deterministic MN manager is not fully initialized yet at the time this
is called, which results in an empty list being returned everytime.
* Better logic to determine if an upgrade is needed
Reuse the "best block" logic to figure out if an upgrade is needed. Also
use it to ensure that older nodes are unable to start after the upgrade
was performed.
* Return null block hash if it was requested with getmnlistdiff
* bump CGovernanceManager::SERIALIZATION_VERSION_STRING
* Check SERIALIZATION_VERSION_STRING before deserializing anything else
* Invoke Clear() before deserializing just to be sure
* Decouple lite mode and client-side PrivateSend
`-enableprivatesend`:
1. off by default in lite mode but can be overridden
2. does not start mixing, use `-privatesendautostart` (default is off) or `privatesend` rpc instead
* Disable PS when there is no wallet, do not auto-start mixing when wallet is locked
* Check for `!fEnablePrivateSend` and `!fPrivateSendRunning` instead of `!pwalletMain` in ps client code
* Add meaningful `privatesend` rpc error messages for various cases when mmixing is disabled
0f3471f net: make CNode's id private (Cory Fields)
9ff0a51 scripted-diff: net: Use accessor rather than node's id directly (Cory Fields)
e50c33e devtools: add script to verify scriptable changes (Cory Fields)
skipped travis changes
Tree-SHA512: a0ff50f4e1d38a2b63109b4996546c91b3e02e00d92c0bf04f48792948f78b1f6d9227a15d25c823fd4723a0277fc6a32c2c1287c7abbb7e50fd82ffb0f8d994
pnode->id to pnode->GetId()
Signed-off-by: Pasta <pasta@dashboost.org>
* Contains dashification. disables `-debug dash`
Merge #9424: Change LogAcceptCategory to use uint32_t rather than sets of strings.
6b3bb3d Change LogAcceptCategory to use uint32_t rather than sets of strings. (Gregory Maxwell)
Tree-SHA512: ebb5bcf9a7d00a32dd1390b727ff4d29330a038423611da01268d8e1d2c0229e52a1098e751d4e6db73ef4ae862e1e96d38249883fcaf12b68f55ebb01035b34
Signed-off-by: Pasta <Pasta@dash.org>
31 -> 32
Signed-off-by: Pasta <Pasta@dash.org>
* Merge #10123: Allow debug logs to be excluded from specified component
3bde556 Add -debugexclude option to switch off logging for specified components (John Newbery)
Tree-SHA512: 30202e3f2085fc2fc5dd4bedb92988f4cb162c612a42cf8f6395a7da326f34975ddc347f82bc4ddca6c84c438dc0cc6e87869f90c7ff88105dbeaa52a947fa43
* bump to uint64_t due to added Dash codes
Signed-off-by: Pasta <Pasta@dash.org>
* bump to uint64_t due to added Dash codes cont.
Signed-off-by: Pasta <Pasta@dash.org>
* string -> BCLog format
Signed-off-by: Pasta <Pasta@dash.org>
* uint32_t -> uint64_t
Signed-off-by: Pasta <Pasta@dash.org>
* Fix CBatchedLogger
* Fix most fDebug-s
* Fix `debug` rpc
* Fix BENCH and RAND conflicts
* Add ALERT and use it
* Update LogPrint-s in dash-specific code
* Tweak few log categories
Specifically:
- use PRIVATESEND in `CPrivateSendClientManager::GetRandomNotUsedMasternode()`
- use ZMQ in `CZMQPublishRawGovernanceVoteNotifier::NotifyGovernanceVote()` and `CZMQPublishRawGovernanceObjectNotifier::NotifyGovernanceObject()`
* Drop no longer used MASTERNODE category
* Merge #10153: logging: Fix off-by-one for shrinkdebugfile default
faab624 logging: Fix off-by-one for shrinkdebugfile (MarcoFalke)
Tree-SHA512: d6153e06067906172ff0611af9e585a3ecf0a7d56925b6ad7c12e75aa802441047059b9b6f6c78e79916c3f2abc8f1998bfd2d5b84201ec6421f727c08da3c21
* Shift dash-specific log categories to start from `1ul << 32` to avoid potential future conflicts with bitcoin ones
* Fix `dash` category
* remove debugCategories
Signed-off-by: Pasta <Pasta@dash.org>
* Prepend "std::" to find call
* Check for BCLog::PRIVATESEND instead of logCategories != BCLog::NONE
* Use BCLog::MNPAYMENTS category instead of checking for logCategories != BCLog::NONE
* Move "End Dash" comment below "ALERT"
When adding new entries here, we'll otherwise get confused with ordering
and might end up forgetting that adding something Dash specific must
continue with the bit after 43.
* rename instantx.* file to instantsend.*
* Reorganize Dash Specific code into folders
add to privatesend folder the header files
Signed-off-by: Pasta <Pasta@dash.org>
add "masternode" to imports
Signed-off-by: Pasta <Pasta@dash.org>
add "masternode" to imports
Signed-off-by: Pasta <Pasta@dash.org>
add "masternode" to imports pt 2
Signed-off-by: Pasta <Pasta@dash.org>
