The flag fDIP0001ActiveAtTip shows a status of activation of DIP0001
This flag is used currently only in net.cpp for setup block buffer size.
Assume the bigger by default so far as DIP0001 is activated years ago
222290f54388270937cb6c174195717e2214ec0d test: Set BIP34Height = 2 for regtest (MarcoFalke)
fac90c55be478f0323eafa1d560ea2c56f04fb23 test: Create all blocks with version 4 or higher (MarcoFalke)
Pull request description:
BIP34 is active on the current tip of mainnet, so all miners must obey it. It would be nice if it also was active in fresh regtest instances from the earliest time possible.
I changed the BIP34 height to `2`, so that the block at height=1 may be used to mine a duplicate coinbase. (Needed to test mainnet behaviour)
This pull is done in two commits:
* test: Create all blocks with version 4 or higher:
Now that BIP34 is activated earlier, we need to create blocks with a higher version number. Just bump it to 4 instead of 2 to avoid having to bump it again later.
* test: Set BIP34Height = 2 for regtest:
This fixes the BIP34 implementation in the tests (to match the one of the Core codebase) and updates the tests where needed
ACKs for top commit:
ajtowns:
ACK 222290f54388270937cb6c174195717e2214ec0d
jonatack:
ACK 222290f54388270937cb6c174195717e2214ec0d tested and reviewed rebased to current master 5e213822f86d
theStack:
Tested ACK 222290f54388270937cb6c174195717e2214ec0d
Tree-SHA512: d69c637a62a64b8e87de8c7f0b305823d8f4d115c1852514b923625dbbcf9a4854b5bb3771ff41702ebf47c4c182a4442c6d7c0b9f282c95a34b83e56a73939b
1fedf470cd test: add type annotation for `ADDRS` in `p2p_addrv2_relay` (Kittywhiskers Van Gogh)
022b76f20b merge bitcoin#23218: Use mocktime for ping timeout (Kittywhiskers Van Gogh)
45d9e58023 merge bitcoin#22960: Set peertimeout in write_config (Kittywhiskers Van Gogh)
06e909b737 merge bitcoin#22604: address rate-limiting follow-ups (Kittywhiskers Van Gogh)
60b3e08ed1 merge bitcoin#22616: address relay fixups (Kittywhiskers Van Gogh)
8b8fbc5226 merge bitcoin#22618: Small follow-ups to 21528 (Kittywhiskers Van Gogh)
18fe765988 merge bitcoin#21528: Reduce addr blackholes (Kittywhiskers Van Gogh)
c1874c6615 net_processing: gate `m_tx_relay` access behind `!IsBlockOnlyConn()` (Kittywhiskers Van Gogh)
602d13d2a2 merge bitcoin#22387: Rate limit the processing of rumoured addresses (Kittywhiskers Van Gogh)
fe66202c05 merge bitcoin#22211: relay I2P addresses even if not reachable (by us) (Kittywhiskers Van Gogh)
7e08db55fe merge bitcoin#22306: Improvements to p2p_addr_relay.py (Kittywhiskers Van Gogh)
ff3497c18b merge bitcoin#21843: enable GetAddr, GetAddresses, and getnodeaddresses by network (Kittywhiskers Van Gogh)
51edeb082c merge bitcoin#21594: add network field to getnodeaddresses (Kittywhiskers Van Gogh)
Pull request description:
## Additional Information
* Dependency for https://github.com/dashpay/dash/pull/5982
* Population of `ADDRS` in `p2p_addr`(`v2`)`_relay` in Dash is done in the test object ([source](0a62b9f985/test/functional/p2p_addrv2_relay.py (L42-L49))) as opposed to upstream, where it is done in the global state ([source](d930c7f5b0/test/functional/p2p_addrv2_relay.py (L23-L35))). This is because Dash specifically relies on `self.mocktime` instead of Bitcoin, which will work with simply sampling current time (`time.time()`).
* [bitcoin#22211](https://github.com/bitcoin/bitcoin/pull/22211) adds changes ([source](https://github.com/bitcoin/bitcoin/pull/22211/files#diff-d3d7b1bb23f25a96c9c7444a79159ad1799895565f99efebf1618e41e886bd53R44-R46)) that add usage of `ADDRS` outside the test object. That, alongside with other considerations, resulted in [dash#5967](https://github.com/dashpay/dash/pull/5967) and a discussion ([source](https://github.com/dashpay/dash/pull/5967/files#r1548101561))
* Eventually, following the footsteps of [dash#5967](https://github.com/dashpay/dash/pull/5967), `ADDRS` was defined outside but setup within the test object. This worked just fine ([build](https://gitlab.com/dashpay/dash/-/jobs/6594036014)) but displeased the linter ([build](https://gitlab.com/dashpay/dash/-/jobs/6594035886)) because `ADDRS` type could not be implicitly determined solely on usage in the global scope.
* An attempt to correct this was done by realignment with upstream ([commit](262d00682c)), which pleased the linter ([build](https://gitlab.com/dashpay/dash/-/jobs/6597322521)) but broken the test ([build](https://gitlab.com/dashpay/dash/-/jobs/6597322548)) for the reasons as mentioned above.
* Therefore, to keep the linter happy, `ADDRS` has been annotated as a `List[CAddress]` (which involved importing `List` but that's fine) ([commit](cb6d36df7d))
* Working on [bitcoin#21528](https://github.com/bitcoin/bitcoin/pull/21528) proved challenging due to differences in Dash's and Bitcoin's approach to relaying and the workarounds used to accommodate for that.
* Bitcoin conditionally initializes `m_tx_relay` ([source](3f7250b328/src/net.cpp (L2989-L2991))) and can always check if transaction relaying is permitted by checking if it's initialized ([source](3f7250b328/src/net_processing.cpp (L1820-L1826))).
* Dash unconditionally initializes it ([source](0a62b9f985/src/net.h (L605-L607))). Earlier, Dash used to check if it's _appropriate_ to relay transactions by checking if it can relay addresses ([source](dc6f52ac99/src/net_processing.cpp (L2134-L2140))), which at the time, simply meant, it wasn't a block-only connection ([source](dc6f52ac99/src/net.h (L568-L572))).
* This mutual exclusivity no longer held true in [dash#5964](https://github.com/dashpay/dash/pull/5964) and therefore, some transaction relay decisions were bound to **not** being a block-only connection ([commit](26c39f5b92)) but some were left behind, adopting `RelayAddrsWithPeer()` ([source](0a62b9f985/src/net_processing.cpp (L2215-L2221))), which, to be noted, is determined by the initialization status of `Peer::m_addr_known` ([source](0a62b9f985/src/net_processing.cpp (L839-L842))), which, so far, was pegged to **not** block-relay connection status ([source](0a62b9f985/src/net_processing.cpp (L1319))).
* [bitcoin#21528](https://github.com/bitcoin/bitcoin/pull/21528) got rid of `RelayAddrsWithPeer()` and replaced it with `Peer::m_addr_relay_enabled` ([source](3f7250b328/src/net_processing.cpp (L237-L251))), which is setup using `Peer::SetupAddressRelay()` ([source](3f7250b328/src/net_processing.cpp (L637-L643))). This means, rather than defining the address relay status during construction, it is setup during the first address-related message (i.e. `ADDR`, `ADDRV2`, `GETADDR`) ([source](3f7250b328/src/net_processing.cpp (L227-L236))).
* Meaning, until the first addr-related message happens, the state is has not been determined and defaults to `false`. Because some `m_tx_relay` usage still piggybacked on addr-relay permission to determine tx-relay, if a transaction message is processed before an address message is processed, there will be a false-negative condition.
The transaction relay logic won't run since it's expecting that if transactions can be relayed, so can addresses and checks for address relaying but believes that it cannot do address relaying, borrowing that state for transaction relaying, despite address relaying permissions actually being indeterminate since it hasn't had a chance to validate its eligibility.
* There were two approaches, run `SetupAddressRelay()` as early in the connection as possible to substitute for the "determine at construction" behaviour and change no other conditional statements... and break address-related tests _or_ move the remaining conditional transaction relay logic to use **not** block-only connection checks instead.
* We've gone with the latter, resulting in some changes where the condition only changes form but is the same (`RelayAddrsWithPeer()` > `Peer::m_addr_relay_enabled`) ([source](109c5a9383 (diff-6875de769e90cec84d2e8a9c1b962cdbcda44d870d42e4215827e599e11e90e3L2131-L2134))) but other changes where the condition itself has been changed (`RelayAddrsWithPeer()` > `!CNode::IsBlockOnlyConn()`) ([source](109c5a9383 (diff-6875de769e90cec84d2e8a9c1b962cdbcda44d870d42e4215827e599e11e90e3R2256-R2259)))
* This does mean that in [dash#5982](https://github.com/dashpay/dash/pull/5982), `Peer::m_block_relay_only` is introduced to be the counterpart to `Peer::m_addr_relay_enabled` ([source](45b48dae0a/src/net_processing.cpp (L321-L322))) to account for some `CConnman` logic being moved into `PeerManager` ([source](45b48dae0a/src/net_processing.cpp (L2186-L2195))), which, in a way, reverts [dash#5339](https://github.com/dashpay/dash/pull/5339) but also, doesn't, since it moves the information into `Peer` instead of reinstating it into `CNode`.
* This was eventual since the underlying presumption that `CNode::IsAddrRelayPeer() == !CNode::IsBlockOnlyConn()` no longer holds true (also because `CNode::IsAddrRelayPeer()` doesn't exist anymore).
Special thanks to @UdjinM6 for help with understanding Dash-specifics with respect to functional tests through help on [dash#5964](https://github.com/dashpay/dash/pull/5964) and [dash#5967](https://github.com/dashpay/dash/pull/5967)
## Breaking Changes
None expected.
RPC changes have been introduced in `getnodeaddresses`, where a new input `network`, can filter addresses based on desired network and a new output, also `network`, will associate the address with the origin network. This change is expected to be backwards-compatible.
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e tests
- [x] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository code-owners and collaborators only)_
ACKs for top commit:
PastaPastaPasta:
utACK 1fedf470cd
Tree-SHA512: 533d33f79a0d9fd730073b3b9a58baf1dd3b0c95823e765c88a43cc974970ed3609bf1863c63ac7fc5586d1437e5250b0a2d3005468da09e407110a412bd0264
de85af5cce727981383ac0fe81f635451b331f23 test: store subversion (user agent) as string in msg_version (Sebastian Falbesoner)
Pull request description:
It seems more natural to treat the "subversion" field (=user agent string, see [BIP 14](https://github.com/bitcoin/bips/blob/master/bip-0014.mediawiki#Proposal)) of a node as pure string rather than a bytestring within the test framework. This is also suggested with the naming prefix in `msg_version.strSubVer`: one probably wouldn't expect a field starting with "str" to be a bytestring that needs further decoding to be useful. This PR moves the encoding/decoding parts to the serialization/deserialization routines so that the user doesn't have to bother with that anymore.
Note that currently, in the master branch the `msg_version.strSubVer` is never read (only in `msg_version.__repr__`); However, one issue that is solved by this PR came up while testing #19509 (not merged yet): A decoding script for binary message capture files takes use of the functional test framework convert it into JSON format. Bytestrings will be convered to hexstrings, while pure strings will (surprise surprise) end up without modification in the file.
So without this patch, we get:
```
$ jq . out.json | grep -m5 strSubVer
"strSubVer": "2f5361746f7368693a32312e39392e302f"
"strSubVer": "2f5361746f7368693a302e32302e312f"
"strSubVer": "2f5361746f7368693a32312e39392e302f"
"strSubVer": "2f5361746f7368693a302e32302e312f"
"strSubVer": "2f5361746f7368693a32312e39392e302f"
```
After this patch:
```
$ jq . out2.json | grep -m5 strSubVer
"strSubVer": "/Satoshi:21.99.0/"
"strSubVer": "/Satoshi:0.20.1/"
"strSubVer": "/Satoshi:21.99.0/"
"strSubVer": "/Satoshi:0.20.1/"
"strSubVer": "/Satoshi:21.99.0/"
```
ACKs for top commit:
jnewbery:
utACK de85af5cce727981383ac0fe81f635451b331f23
Tree-SHA512: ff23642705c858e8387a625537dfec82e6b8a15da6d99b8d12152560e52d243ba17431b602b26f60996d897e00e3f37dcf8dc8a303ffb1d544df29a5937080f9
bdb8b9a347e68f80a2e8d44ce5590a2e8214b6bb test: doc: improve doc for `from_hex` helper (mention `to_hex` alternative) (Sebastian Falbesoner)
191405420815d49ab50184513717a303fc2744d6 scripted-diff: test: rename `FromHex` to `from_hex` (Sebastian Falbesoner)
a79396fe5f8f81c78cf84117a87074c6ff6c9d95 test: remove `ToHex` helper, use .serialize().hex() instead (Sebastian Falbesoner)
2ce7b47958c4a10ba20dc86c011d71cda4b070a5 test: introduce `tx_from_hex` helper for tx deserialization (Sebastian Falbesoner)
Pull request description:
There are still many functional tests that perform conversions from a hex-string to a message object (deserialization) manually. This PR identifies all those instances and replaces them with a newly introduced helper `tx_from_hex`.
Instances were found via
* `git grep "deserialize.*BytesIO"`
and some of them manually, when it were not one-liners.
Further, the helper `ToHex` was removed and simply replaced by `.serialize().hex()`, since now both variants are in use (sometimes even within the same test) and using the helper doesn't really have an advantage in readability. (see discussion https://github.com/bitcoin/bitcoin/pull/22257#discussion_r652404782)
ACKs for top commit:
MarcoFalke:
review re-ACK bdb8b9a347e68f80a2e8d44ce5590a2e8214b6bb 😁
Tree-SHA512: e25d7dc85918de1d6755a5cea65471b07a743204c20ad1c2f71ff07ef48cc1b9ad3fe5f515c1efaba2b2e3d89384e7980380c5d81895f9826e2046808cd3266e
39a9ec579f023ab262a1abd1f0c869be5b1f3f4d Unconditionally check for fRelay field in test framework (Troy Giorshev)
Pull request description:
picking up #20411 (rebased onto master)
There is a discrepancy in the implementation of our p2p protocol between
bitcoind and the testing framework. The fRelay field is an optional
field at the end of a version message as of protocol version 70001.
However, when deserializing a message in bitcoind, we don't check the
version to see if it should have an fRelay field or not. Instead, we
unconditionally attempt to deserialize into the field.
This commit brings the testing framework in line with the implementation
in core.
This matters for a version message with the following fields:
Version = 60000
fRelay = 1
Bitcoind would deserialize this into a version message with
Version=60000 and fRelay=1, whereas (before this commit) our testing
framework would deserialize this into a version message with
Version=60000 and fRelay=0.
ACKs for top commit:
jnewbery:
utACK 39a9ec579f023ab262a1abd1f0c869be5b1f3f4d
Tree-SHA512: 13a23f1180b7121ba41cb85baa38094b41f4607a7c88b3384775177cb116e76faf5514760624f98a4e8a830767407c46753a7e0285158c33e0c6ce395de8f15c
bff7c66e67aa2f18ef70139338643656a54444fe Add documentation to contrib folder (Troy Giorshev)
381f77be858d7417209b6de0b7cd23cb7eb99261 Add Message Capture Test (Troy Giorshev)
e4f378a505922c0f544b4cfbfdb169e884e02be9 Add capture parser (Troy Giorshev)
4d1a582549bc982d55e24585b0ba06f92f21e9da Call CaptureMessage at appropriate locations (Troy Giorshev)
f2a77ff97bec09dd5fcc043d8659d8ec5dfb87c2 Add CaptureMessage (Troy Giorshev)
dbf779d5deb04f55c6e8493ce4e12ed4628638f3 Clean PushMessage and ProcessMessages (Troy Giorshev)
Pull request description:
This PR introduces per-peer message capture into Bitcoin Core. 📓
## Purpose
The purpose and scope of this feature is intentionally limited. It answers a question anyone new to Bitcoin's P2P protocol has had: "Can I see what messages my node is sending and receiving?".
## Functionality
When a new debug-only command line argument `capturemessages` is set, any message that the node receives or sends is captured. The capture occurs in the MessageHandler thread. When receiving a message, it is captured as soon as the MessageHandler thread takes the message off of the vProcessMsg queue. When sending, the message is captured just before the message is pushed onto the vSendMsg queue.
The message capture is as minimal as possible to reduce the performance impact on the node. Messages are captured to a new `message_capture` folder in the datadir. Each node has their own subfolder named with their IP address and port. Inside, received and sent messages are captured into two binary files, msgs_recv.dat and msgs_sent.dat, like so:
```
message_capture/203.0.113.7:56072/msgs_recv.dat
message_capture/203.0.113.7:56072/msgs_sent.dat
```
Because the messages are raw binary dumps, included in this PR is a Python parsing tool to convert the binary files into human-readable JSON. This script has been placed on its own and out of the way in the new `contrib/message-capture` folder. Its usage is simple and easily discovered by the autogenerated `-h` option.
## Future Maintenance
I sympathize greatly with anyone who says "the best code is no code".
The future maintenance of this feature will be minimal. The logic to deserialize the payload of the p2p messages exists in our testing framework. As long as our testing framework works, so will this tool.
Additionally, I hope that the simplicity of this tool will mean that it gets used frequently, so that problems will be discovered and solved when they are small.
## FAQ
"Why not just use Wireshark"
Yes, Wireshark has the ability to filter and decode Bitcoin messages. However, the purpose of the message capture added in this PR is to assist with debugging, primarily for new developers looking to improve their knowledge of the Bitcoin Protocol. This drives the design in a different direction than Wireshark, in two different ways. First, this tool must be convenient and simple to use. Using an external tool, like Wireshark, requires setup and interpretation of the results. To a new user who doesn't necessarily know what to expect, this is unnecessary difficulty. This tool, on the other hand, "just works". Turn on the command line flag, run your node, run the script, read the JSON. Second, because this tool is being used for debugging, we want it to be as close to the true behavior of the node as possible. A lot can happen in the SocketHandler thread that would be missed by Wireshark.
Additionally, if we are to use Wireshark, we are at the mercy of whoever it maintaining the protocol in Wireshark, both as to it being accurate and recent. As can be seen by the **many** previous attempts to include Bitcoin in Wireshark (google "bitcoin dissector") this is easier said than done.
Lastly, I truly believe that this tool will be used significantly more by being included in the codebase. It's just that much more discoverable.
ACKs for top commit:
MarcoFalke:
re-ACK bff7c66e67aa2f18ef70139338643656a54444fe only some minor changes: 👚
jnewbery:
utACK bff7c66e67aa2f18ef70139338643656a54444fe
theStack:
re-ACK bff7c66e67aa2f18ef70139338643656a54444fe
Tree-SHA512: e59e3160422269221f70f98720b47842775781c247c064071d546c24fa7a35a0e5534e8baa4b4591a750d7eb16de6b4ecf54cbee6d193b261f4f104e28c15f47
56010f92564a94b0ca6c008c0e6f74a19fad4a2a test: hoist p2p values to test framework constants (Jon Atack)
75447f0893f9ad9bf83d182b301d139430d8de1c test: improve msg sends and p2p disconnections in p2p_invalid_messages (Jon Atack)
57960192a5362ff1a7b996995332535f4c2a25c3 test: refactor test_large_inv() into 3 tests with common method (Jon Atack)
e2b21d8a597c536a8617408d43958bfe9f98a442 test: add p2p_invalid_messages logging (Jon Atack)
9fa494dc0969c61d5ef33708a08923cca19ce091 net: update misbehavior logging for oversized messages (Jon Atack)
Pull request description:
...seen while reviewing #19264, #19252, #19304 and #19107:
in `net_processing.cpp`
- make the debug logging for oversized message size misbehavior the same for `addr`, `getdata`, `headers` and `inv` messages
in `p2p_invalid_messages`
- add missing logging
- improve assertions/message sends, move cleanup disconnections outside the assertion scopes
- split a slowish 3-part test into 3 order-independent tests
- add a few p2p constants to the test framework
ACKs for top commit:
troygiorshev:
reACK 56010f92564a94b0ca6c008c0e6f74a19fad4a2a
MarcoFalke:
ACK 56010f9256 🎛
Tree-SHA512: db67b70278f8d4c318907e105af54b54eb3afd15500f9aa0c98034f6fd4bd1cf9ad1663037bd9b237ff4890f3059b37291a6498d8d6ae2cc38efb9f045f73310
7984c39be11ca04460883365e1ae2a496aaa6c0e test framework: serialize/deserialize inv type as unsigned int (Jon Atack)
407175e0c2bc797599ebd9c0a1f2ec89ad7af136 p2p: change CInv::type from int to uint32_t (Jon Atack)
Pull request description:
Fixes UBSan implicit-integer-sign-change issue per https://github.com/bitcoin/bitcoin/pull/19610#issuecomment-680686460.
Credit to Crypt-iQ for finding and reporting the issue and to vasild for the original review suggestion in https://github.com/bitcoin/bitcoin/pull/19590#pullrequestreview-455788826.
Closes#19678.
ACKs for top commit:
laanwj:
ACK 7984c39be11ca04460883365e1ae2a496aaa6c0e
MarcoFalke:
ACK 7984c39be11ca04460883365e1ae2a496aaa6c0e 🌻
vasild:
ACK 7984c39be
Tree-SHA512: 59f3a75f40ce066ca6f0bb1927197254238302b4073af1574bdbfe6ed580876437be804be4e47d51467d604f0d9e3a5875159f7f2edbb2351fdb2bb9465100b5
This backport is marked as full, not partial, but it has only refactorings
and non-witness related changes.
Included commits are:
- test: Update test framework p2p protocol version to 70016
- Rename AddInventoryKnown() to AddKnownTx()
- Add support for tx-relay via wtxid
This adds a field to CNodeState that tracks whether to relay transactions with
that peer via wtxid, instead of txid. As of this commit the field will always
be false, but in a later commit we will add a way to negotiate turning this on
via p2p messages exchanged with the peer.
- Just pass a hash to AddInventoryKnown
Since it's only used for transactions, there's no need to pass in an inv type.
- Add wtxid to mempool unbroadcast tracking
d5800da5199527a366024bc80cad7fcca17d5c4a [test] Remove final references to mininode (John Newbery)
5e8df3312e47a73e747ee892face55ed9ababeea test: resort imports (John Newbery)
85165d4332b0f72d30e0c584b476249b542338e6 scripted-diff: Rename mininode to p2p (John Newbery)
9e2897d020b114a10c860f90c5405be029afddba scripted-diff: Rename mininode_lock to p2p_lock (John Newbery)
Pull request description:
New contributors are often confused by the terminology in the test framework, and what the difference between a _node_ and a _peer_ is. To summarize:
- a 'node' is a bitcoind instance. This is the thing whose behavior is being tested. Each bitcoind node is managed by a python `TestNode` object which is used to start/stop the node, manage the node's data directory, read state about the node (eg process status, log file), and interact with the node over different interfaces.
- one of the interfaces that we can use to interact with the node is the p2p interface. Each connection to a node using this interface is managed by a python `P2PInterface` or derived object (which is owned by the `TestNode` object). We can open zero, one or many p2p connections to each bitcoind node. The node sees these connections as 'peers'.
For historic reasons, the word 'mininode' has been used to refer to those p2p interface objects that we use to connect to the bitcoind node (the code was originally taken from the 'mini-node' branch of https://github.com/jgarzik/pynode/tree/mini-node). However that name has proved to be confusing for new contributors, so rename the remaining references.
ACKs for top commit:
amitiuttarwar:
ACK d5800da519
MarcoFalke:
ACK d5800da5199527a366024bc80cad7fcca17d5c4a 🚞
Tree-SHA512: 2c46c2ac3c4278b6e3c647cfd8108428a41e80788fc4f0e386e5b0c47675bc687d94779496c09a3e5ea1319617295be10c422adeeff2d2bd68378e00e0eeb5de
dac7a111bdd3b0233d94cf68dae7a8bfc6ac9c64 refactor: test: use _ variable for unused loop counters (Sebastian Falbesoner)
Pull request description:
This tiny PR substitutes Python loops in the form of `for x in range(N): ...` by `for _ in range(N): ...` where applicable. The idea is indicating to the reader that a block (or statement, in list comprehensions) is just repeated N times, and that the loop counter is not used in the body, hence using the throwaway variable. This is already done quite often in the current tests (see e.g. `$ git grep "for _ in range("`). Another alternative would be using `itertools.repeat` (according to Python core developer Raymond Hettinger it's [even faster](https://twitter.com/raymondh/status/1144527183341375488)), but that doesn't seem to be widespread in use and I'm not sure about a readability increase.
The only drawback I see is that whenever one wants to debug loop iterations, one would need to introduce a loop variable again. Reviewing this is basically a no-brainer, since tests would fail immediately if a a substitution has taken place on a loop where the variable is used.
Instances to replace were found by `$ git grep "for.*in range("` and manually checked.
ACKs for top commit:
darosior:
ACK dac7a111bdd3b0233d94cf68dae7a8bfc6ac9c64
instagibbs:
manual inspection ACK dac7a111bd
practicalswift:
ACK dac7a111bdd3b0233d94cf68dae7a8bfc6ac9c64 -- the updated code is easier to reason about since the throwaway nature of a variable is expressed explicitly (using the Pythonic `_` idiom) instead of implicitly. Explicit is better than implicit was we all know by now :)
Tree-SHA512: 5f43ded9ce14e5e00b3876ec445b90acda1842f813149ae7bafa93f3ac3d510bb778e2c701187fd2c73585e6b87797bb2d2987139bd1a9ba7d58775a59392406
5dc6d9207778c51c10c16fac4b3663bc7905bafc test: make BIP157 messages default-constructible (MESSAGEMAP compatibility) (Sebastian Falbesoner)
71e4cfefe765c58937b3fd3125782ca8407315d2 test: p2p: add missing BIP157 message types to MESSAGEMAP (Sebastian Falbesoner)
Pull request description:
The script [message-capture-parser.py](https://github.com/bitcoin/bitcoin/blob/master/contrib/message-capture/message-capture-parser.py) currently doesn't support parsing the BIP157 messages `getcfilters`, `getcfheaders` and `getcfcheckpt`, e.g.
```
$ ./contrib/message-capture/message-capture-parser.py msgs_recv.dat
...
WARNING - Unrecognized message type b'getcfcheckpt' in /home/thestack/bitcoin/msgs_recv.dat
...
```
This PR fixes this by adding the missing message type mappings to the [`MESSAGEMAP`](225e5b57b2/test/functional/test_framework/p2p.py (L95-L127)) in the test framework and add default-constructors for the corresponding `msg_`... classes.
Without the second commit, the following error message would occur:
```
File "/home/thestack/bitcoin/./contrib/message-capture/message-capture-parser.py", line 141, in process_file
msg = MESSAGEMAP[msgtype]()
TypeError: __init__() missing 2 required positional arguments: 'filter_type' and 'stop_hash'
```
ACKs for top commit:
dunxen:
tACK [5dc6d92](5dc6d92077)
Tree-SHA512: d656c4d38a856373f01d7c293ae7d2b27378a9fc248048ebf2a64725ef8b498b3ddf4f420704abdb20d0c68ca548f1777602c5e73b66821a20c97ae618f1d63f
## Issue being fixed or feature implemented
Non-deterministic IS locks aren't used anymore since v18 dip24.
We should drop that support to make code simpler.
## What was done?
Dropped non-deterministic IS code, `evo_instantsend_tests` and
`feature_llmq_is_migration.py` (don't need it anymore), adjusted func
tests.
## How Has This Been Tested?
all tests, synced Testnet
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: Konstantin Akimov <545784+knst@users.noreply.github.com>
fa4632c41714dfaa699bacc6a947d72668a4deef test: Move boost/stdlib includes last (MarcoFalke)
fa488f131fd4f5bab0d01376c5a5013306f1abcd scripted-diff: Bump copyright headers (MarcoFalke)
fac5c373006a9e4bcbb56843bb85f1aca4d87599 scripted-diff: Sort test includes (MarcoFalke)
Pull request description:
When writing tests, often includes need to be added or removed. Currently the list of includes is not sorted, so developers that write tests and have `clang-format` installed will either have an unrelated change (sorting) included in their commit or they will have to manually undo the sort.
This pull preempts both issues by just sorting all includes in one commit.
Please be aware that this is **NOT** a change to policy to enforce clang-format or any other developer guideline or process. Developers are free to use whatever tool they want, see also #18651.
Edit: Also includes a commit to bump the copyright headers, so that the touched files don't need to be touched again for that.
ACKs for top commit:
practicalswift:
ACK fa4632c41714dfaa699bacc6a947d72668a4deef
jonatack:
ACK fa4632c41714dfaa, light review and sanity checks with gcc build and clang fuzz build
Tree-SHA512: 130a8d073a379ba556b1e64104d37c46b671425c0aef0ed725fd60156a95e8dc83fb6f0b5330b2f8152cf5daaf3983b4aca5e75812598f2626c39fd12b88b180
c7437185589926ec8def2af6bede6a407b3d2e4a test: add further BIP37 size limit checks to p2p_filter.py (Sebastian Falbesoner)
Pull request description:
This is a follow-up PR to #18628. In addition to the hash-functions limit test introduced with commit fa4c29bc1d, it adds checks for the following size limits as defined in [BIP37](https://github.com/bitcoin/bips/blob/master/bip-0037.mediawiki):
ad message type `filterload`:
> The filter itself is simply a bit field of arbitrary byte-aligned size. The maximum size is **36,000 bytes**.
ad message type `filteradd`:
> The data field must be smaller than or equal to **520 bytes** in size (the maximum size of any potentially matched object).
Also introduces new constants for the limits (or reuses the max script size constant in case for the `filteradd` limit).
Also fixes#18711 by changing the misbehaviour check on "filteradd without filterset" (introduced with #18544) below to also use the more commonly used `assert_debug_log` method.
ACKs for top commit:
MarcoFalke:
ACK c7437185589926ec8def2af6bede6a407b3d2e4a
robot-visions:
ACK c7437185589926ec8def2af6bede6a407b3d2e4a
jonasschnelli:
utACK c7437185589926ec8def2af6bede6a407b3d2e4a. Seems to fix it: https://bitcoinbuilds.org/index.php?build=2524
Tree-SHA512: a03e7639263eb36a381922afb4e1d0ed2ae286f2ad2e7bbd922509a043ddf6cfd08747e01d54d29bfb8f54b66908f653974b9c347e4ca4f43332b586778893be
fa40168ab3102b9ad850f967a0e7fa22dbfbd0c6 Remove unused bits from service flags enum (MarcoFalke)
Pull request description:
Remove service bits that haven't been observed on the active network for years and won't ever be observed on the network with this meaning. Keeping this dead assignment in our source code forever doesn't add any value.
I somehow forgot to do this in commit fa0d0ff6e1bee60fde63724ae28a51aac5a94d4a.
ACKs for top commit:
laanwj:
Code review ACK fa40168ab3102b9ad850f967a0e7fa22dbfbd0c6
practicalswift:
cr ACK fa40168ab3102b9ad850f967a0e7fa22dbfbd0c6
fanquake:
ACK fa40168ab3102b9ad850f967a0e7fa22dbfbd0c6
Tree-SHA512: 376e5ac05940493cf2209fea60515c843e978c4b476f2524f6bf7a37a646d237c3ddcf6c0fa23641f9ba550f625609703d9b51b4be631a7f2a90e1092b557232
## Issue being fixed or feature implemented
Current implementation of MnEhfTx is not matched with DIP-0023, this PR
fixes it. It is a prior work for
https://github.com/dashpay/dash/pull/5469
## What was done?
- requestID is fixed from `clsig{quorumHeight}` to `mnhf{versionBit}` +
fixes for signature validation properly
- v20 is minimal height to accept MnEHF special transactions
- versionBit is not BLS version - removed unrelated wrong code and
validations
- TxMempool will accept MnEHF transaction even if inputs/outputs are
zeroes and no fee
- implemented python's serialization/deserialization of MnEHF
transactions for future using in functional tests
## How Has This Been Tested?
Run functional/unit tests. Beside that there's new functional test in
https://github.com/dashpay/dash/pull/5469 that actually test format of
transaction and signature validation - to be merged later.
## Breaking Changes
Payload of MnEhf tx is changed, related consensus rules are changed.
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
This is an implementation of DIP0027 "Credit Asset Locks".
It's a mechanism to fluidly exchange between Dash and credits.
## What was done?
This pull request includes:
- Asset Lock transaction
- Asset Unlock transaction (withdrawal)
- Credit Pool in coinbase
- Unit tests for Asset Lock/Unlock tx
- New functional test `feature_asset_locks.py`
RPC: currently locked amount (credit pool) is available through rpc call
`getblock`.
## How Has This Been Tested?
There added new unit tests for basic checks of transaction validity
(asset lock/unlock).
Also added new functional test "feature_asset_locks.py" that cover
typical cases, but not all corner cases yet.
## Breaking Changes
This feature should be activated as hard-fork because:
- It adds 2 new special transaction and one of them [asset unlock tx]
requires update consensus rulels
- It adds new data in coinbase tx (credit pool)
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**To release DIP 0027**
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
0956e46bff7f0b6da65a4de6d4f8261fe9d7055c test: use zero-argument super() shortcut (Python 3.0+) (Sebastian Falbesoner)
Pull request description:
This mini-PR replaces all calls to `super(...)` with arguments with the zero-argument shortcut `super()` where applicable. See [PEP 3135](https://www.python.org/dev/peps/pep-3135/#specification):
> The new syntax:
>
> super()
>
> is equivalent to:
>
> super(__class__, <firstarg>)
>
> where __class__ is the class that the method was defined in, and <firstarg> is
> the first parameter of the method (normally self for instance methods, and cls
> for class methods).
ACKs for top commit:
fanquake:
ACK 0956e46bff7f0b6da65a4de6d4f8261fe9d7055c
Tree-SHA512: 4ac66fe7ab2be2e8a514e5fcfc41dbb298f21b23ebb7b7b0310d704b0b3cef8adf287a8d80346d1ea9418998c597b4f0ff1f66148d0d806bb43db6607e0fe1cf
## Issue being fixed or feature implemented
Implementation of Randomness Beacon Part 3.
Starting from v20 activation fork, members for quorums are sorted using
(if available) the best CL signature found in Coinbase.
If no CL signature is present yet, then the usual way is used (By using
Blockhash instead)
The actual new way to shuffle is already implemented in
https://github.com/dashpay/dash/pull/5366.
SPV clients also need to calculate members, but they only know block
headers.
Since Coinbase is in the actual block, then they lack the required
information to correctly calculate quorum members.
## What was done?
- Message `MNLISTIDFF` is enriched with a new field `quorumsCLSigs`.
This field holds the Chainlock Signature required for each set of
indexes corresponding to quorums in field `newQuorums`.
- Protocol version has been bumped to `70230`.
- Clients with protocol version greater or equal to `70230` will receive
the new field `quorumsCLSigs`.
- The same field is returned in `protx diff` RPC.
Note:
- Field `quorumsCLSigs` will populated only after v20 activation
- If for one or more quorums, no non-null CL sig was found in CbTx then
a null signature is returned in `quorumsCLSigs`.
## How Has This Been Tested?
- Functional test mininode's protocol version was bumped to `70230`.
- `feature_llmq_rotation.py` checks that `quorumsCLSigs` match in both
P2P and RPC messages.
## Breaking Changes
No
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
---------
Co-authored-by: thephez <thephez@users.noreply.github.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: pasta <pasta@dashboost.org>
## Issue being fixed or feature implemented
Version field should always be the first field of a message for better
readibility.
## What was done?
- Introduced new protocol version `MNLISTDIFF_VERSION_ORDER` (`70229`).
- `nVersion` serialisation order is changed for clients with protocol
version greater than or equal to `70229`.
- For clients with protocol version >= `70225` and < `70229` the old
order is used: can be deprecated in the future.
- Increased functional test P2P mininode's protocol version to `70229`.
## How Has This Been Tested?
`feature_llmq_rotation.py` with new protocol version.
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
## Issue being fixed or feature implemented
Mobile wallets would have to convert 4k+ pubkeys at the V19 fork point
and it's a pretty hard job for them that can easily take 10-15 seconds
if not more. Also after the HF, if a masternode list is requested from
before the HF, the operator keys come in basic scheme, but the
merkelroot was calculated with legacy. From mobile team work it wasn't
possible to convert all operator keys to legacy and then calculate the
correct merkleroot.
~This PR builds on top of ~#5392~ #5403 (changes that belong to this PR:
26f7e966500bdea4c604f1d16716b40b366fc707 and
4b42dc8fcee3354afd82ce7e3a72ebe1659f5f22) and aims to solve both of
these issues.~
cc @hashengineering @QuantumExplorer
## What was done?
Introduce `nVersion` on p2p level for every CSimplifiedMNListEntry. Set
`nVersion` to the same value we have it in CDeterministicMNState i.e.
pubkey serialization would not be via basic scheme only after the V19
fork, it would match the way it’s serialized on-chain/in
CDeterministicMNState for that specific MN.
## How Has This Been Tested?
run tests
## Breaking Changes
NOTE: `testnet` is going to re-fork at v19 forkpoint because
`merkleRootMNList` is not going to match
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
- [ ] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
0ed2d8e07d3806d78d03a77d2153f22f9d733a07 test: add BIP37 remote crash bug [CVE-2013-5700] test to p2p_filter.py (Sebastian Falbesoner)
Pull request description:
Integrates the missing message type `filteradd` to the test framework and checks that the BIP37 implementation is not vulnerable to the "remote crash bug" [CVE-2013-5700](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2013-5700) anymore. Prior to v.0.8.4, it was possible to trigger a division-by-zero error on the following line in the function `CBloomFilter::Hash()`:
f0d6487e29/src/bloom.cpp (L45)
By setting a zero-length filter via `filterload`, `vData.size()` is 0, so the modulo operation above, called on any .insert() or .contains() operation then crashed the node. The test uses the approach of just sending an arbitrary `filteradd` message after, which calls `CBloomFilter::insert()` (and in turn `CBloomFilter::Hash()`) on the node. The vulnerability was fixed by commit 37c6389c5a (an intentional covert fix, [according to gmaxwell](https://github.com/bitcoin/bitcoin/issues/18483#issuecomment-608224095)), which introduced flags `isEmpty`/`isFull` that wouldn't call the `Hash()` member function if `isFull` is true (set to true by default constructor).
To validate that the test fails if the implementation is vulnerable, one can simply set the flags to false in the member function `UpdateEmptyFull()` (that is called after a filter received via `filterload` is constructed), which activates the vulnerable code path calling `Hash` in any case on adding or testing for data in the filter:
```diff
diff --git a/src/bloom.cpp b/src/bloom.cpp
index bd6069b..ef294a3 100644
--- a/src/bloom.cpp
+++ b/src/bloom.cpp
@@ -199,8 +199,8 @@ void CBloomFilter::UpdateEmptyFull()
full &= vData[i] == 0xff;
empty &= vData[i] == 0;
}
- isFull = full;
- isEmpty = empty;
+ isFull = false;
+ isEmpty = false;
}
```
Resulting in:
```
$ ./p2p_filter.py
[...]
2020-04-03T14:38:59.593000Z TestFramework (INFO): Check that division-by-zero remote crash bug [CVE-2013-5700] is fixed
2020-04-03T14:38:59.695000Z TestFramework (ERROR): Assertion failed
[...]
[... some exceptions following ...]
```
ACKs for top commit:
naumenkogs:
utACK 0ed2d8e07d3806d78d03a77d2153f22f9d733a07
Tree-SHA512: 02d0253d13eab70c4bd007b0750c56a5a92d05d419d53033523eeb3ed80318bc95196ab90f7745ea3ac9ebae7caee3adbf2a055a40a4124e0915226e49018fe8
00559229588feb19de2a0cb7506f70c483a1f433 test: add BIP37 'filterclear' test to p2p_filter.py (Sebastian Falbesoner)
Pull request description:
Integrates the message type `filterclear` to the test framework and adds a simple test to `p2p_filter.py`, checking that arbitrary txs get relayed again after deleting the filter.
ACKs for top commit:
naumenkogs:
utACK 00559229588feb19de2a0cb7506f70c483a1f433
Tree-SHA512: fe64e99a526865770707d8077b9968d3923f248045ec7fa56cd380dba85ac77a71a473d244ef3aede2fc0d287b8d7c6bc0156b6033b0c949c2058cc08e255697
## Issue being fixed or feature implemented
## What was done?
- Bumped version of `CbTx`. Added fields `bestCLHeightDiff`,
`bestCLSignature`
- Miner starting from v20 fork, includes best CL signature in `CbTx` (if
available) or null signature.
- All nodes should verify included CL signature before accepting the
block.
## How Has This Been Tested?
Basically, activated v20 on in the beginning of
`feature_llmq_chainlocks.py`
## Breaking Changes
Yes, new version of CbTx
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
## Issue being fixed or feature implemented
This was reported/requested by @HashEngineering:
> Older versions of our App won't sync due to if (obj.nVersion ==
BASIC_BLS_VERSION) . Older versions don't know what version a SML Entry
is. As such, they will never read the type field. On the android client
this causes an offset problem when reading the mnlistdiff and it will
throw an exception that bans the peer that supplied it. Soon enough, no
peers will be left to connect to because they will all give the android
client bad data.
## What was done?
With this PR, SML will serialise the new v19 fields (`nType`,
`platformHTTPPort`, `platformNodeID`) if the client's version is at
least equal to `70227`.
Note: Serialisation for hashing skips the above rule.
Also, functional test mininode protocol version is set to `70227`.
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
638441928a446726ce3a7fb20433a5478e7585bb test: add parameterized constructor for msg_sendcmpct() (Sebastian Falbesoner)
Pull request description:
While working on the test for #19776 I noticed that creating a `sendcmpct` message is quite cumbersome -- due to the lack of a parameterized constructor, one needs to create an empty (that is, initialized with default values) object and then set the two fields one by one. This PR replaces the default constructor with a parameterized constructor and uses it in the test `p2p_compactblocks.py`, reducing LOC. No need to pollute the namespace with temporary throw-away message objects anymore.
ACKs for top commit:
guggero:
Code review ACK 638441928a446726ce3a7fb20433a5478e7585bb.
epson121:
Code review ACK 638441928a446726ce3a7fb20433a5478e7585bb
Tree-SHA512: 3b58d276d714b73abc6cc98d1d52dec5f6026b33f03faaeb7dcbc5d83ac377555179f98b159b2b9ecc8957999c35a1dc082e3c69299c5fde4e35f1bd0587ce9d
854382885f18aa9a95cdde3d11591b05c305ad3f refactor: test: improve wait_for{header,merkleblock} interface (Sebastian Falbesoner)
1356a45ef042e7bd3d539fbb606d6b1be547d00f test: complete impl. of msg_merkleblock and wait_for_merkleblock (Sebastian Falbesoner)
Pull request description:
Implements the missing initialization/serialization methods for `msg_merkleblock`, based on the already present class `CMerkleBlock`. Also changes the method `wait_for_merkleblock()` to be more precise by waiting for a merkleblock with a specified blockhash instead of an arbitrary one.
In the BIP37 test `p2p_filter.py`, this new method is used to make the test of receiving merkleblock and tx if a filter is set to be more precise, by checking if they also arrive in the right order.
In the course of this PR, also the interface for the methods `wait_for_merkleblock()` and `wait_for_header()` are improved to take a hex string instead of an integer, which is more typesafe and less of a burden to the caller.
ACKs for top commit:
MarcoFalke:
ACK 854382885f18aa9a95cdde3d11591b05c305ad3f
Tree-SHA512: adaf0ac728ef0b9929cb417a7a7b4c1346c400b2d365bf6914515c67b6cfe8f4a7ecc62fb514afdce9792f0bed833416f6bca6b9620f3d5dcdc66e4d5b0b7ea3
e4f4ea47ebf7774fb6f445adde7bf7ea71fa05a1 lint: Catch use of [] or {} as default parameter values in Python functions (practicalswift)
25dd86715039586d92176eee16e9c6644d2547f0 Avoid using mutable default parameter values (practicalswift)
Pull request description:
Avoid common Python default parameter gotcha when mutable `dict`/`list`:s are used as default parameter values.
Examples of this gotcha caught during review:
* https://github.com/bitcoin/bitcoin/pull/16673#discussion_r317415261
* https://github.com/bitcoin/bitcoin/pull/14565#discussion_r241942304
Perhaps surprisingly this is how mutable list and dictionary default parameter values behave in Python:
```
>>> def f(i, j=[], k={}):
... j.append(i)
... k[i] = True
... return j, k
...
>>> f(1)
([1], {1: True})
>>> f(1)
([1, 1], {1: True})
>>> f(2)
([1, 1, 2], {1: True, 2: True})
```
In contrast to:
```
>>> def f(i, j=None, k=None):
... if j is None:
... j = []
... if k is None:
... k = {}
... j.append(i)
... k[i] = True
... return j, k
...
>>> f(1)
([1], {1: True})
>>> f(1)
([1], {1: True})
>>> f(2)
([2], {2: True})
```
The latter is typically the intended behaviour.
This PR fixes two instances of this and adds a check guarding against this gotcha going forward :-)
ACKs for top commit:
Sjors:
Oh Python... ACK e4f4ea47ebf7774fb6f445adde7bf7ea71fa05a1. Testing tip: swap the two commits.
Tree-SHA512: 56e14d24fc866211a20185c9fdb274ed046c3aed2dc0e07699e58b6f9fa3b79f6d0c880fb02d72b7fe5cc5eb7c0ff6da0ead33123344e1a872209370c2e49e3f
fa156999695ddaeb016d8320bee62f8d96679d55 test: Add basic test for BIP 37 (MarcoFalke)
Pull request description:
This does not add full coverage, but should be a good start and can be extended in the future. Currently, none of the BIP 37 p2p code has test coverage.
ACKs for top commit:
practicalswift:
Code review ACK fa156999695ddaeb016d8320bee62f8d96679d55 -- more testing coverage is better than less testing coverage
Tree-SHA512: d52e8be79240dffb769105c087ae0ae9305d599282546e4ca7379c4c7add2dbcd668265b46670aa07c357638044cf0f61a6fab7dba8971dd0f80c8f99768686e
## Issue being fixed or feature implemented
## What was done?
1. Increased protocol version of mininode to match v19 changes in
`MNLISTDIFF` P2P message
2. Added verification of MNs and HPMNs (dip4) in `feature_llmq_hpmn.py`
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
b651ef7e1c submitheader: more directly test missing prev block header (Gregory Sanders)
1e7f741745 remove some magic mining constants in functional tests (Gregory Sanders)
Pull request description:
The fewer magic numbers the better.
Also more directly tested a `submitheader` case of bad previous blockhash.
Tree-SHA512: 52b01a6aa199fa909eea4e9e84409a901933e545724e33149cc4132c82168199fd678809b6d94d95c9ff6ad02238a9552363620d13b8beaa5d4b67ade9ef425c
* Compressed headers implementation.
First header is always compressed in a headers2 msg
Version is uncompressed if it’s not matched within the last 7 unique versions to be sent in the current msg
Service flag to signal that the peer supports compressed headers
If compressed headers services is active, the peer will receive headers compressed
If both sendheaders and sendheaders2 are sent, the peer will respond with compressed headers
Functional tests as for uncompressed headers
Updates regarding the existing functional tests to use the compressed headers if the NODE_HEADERS_COMPRESSED service flag is active
* style: add missing comma
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
