* Update activemn if protx info changed
* Add `==` and `!=` operators to CDeterministicMNState
* Only re-init active MN if its IP changed, changes to payout, voting etc. can be done without it
* Test `masternode status` updates
* Don't track mnListEntry anymore and instead get the DMN on demand
* Revert "Add `==` and `!=` operators to CDeterministicMNState"
This reverts commit fba4687581.
5a67c0524e [tests] Fix intermittent rpc_net.py failure. (John Newbery)
Pull request description:
rpc_net.py would intermittently fail on Travis, probably
due to assuming that two consecutive RPC calls were atomic.
Fix this by trying the test up to three times and only failing
if all three attempts fail.
fixes#11778
Tree-SHA512: f2f5047e05114ad2110377e6221ce057680c240952971fb33863834587d2250896c6b697ba27eef739cd0ab23faf47dfae8cafadc9833cbfab5a6f7e36dae5e2
62c304ea48 tests: Allow closed http server in assert_start_raises_init_error (Chun Kuan Lee)
Pull request description:
The rpc handler may be unregistered when http server haven't been closed yet. So it may be allowable to get -342 `non-JSON HTTP response with \'%i %s\' from server` (503 Service Unavailable)
See https://ci.appveyor.com/project/DrahtBot/bitcoin/build/master.2001. It shows "Rejecting request while shutting down" between "RPC stopped" and "Stopped HTTP server"
Tree-SHA512: e1f50ab9096cf23494ccc2850c01516c4a75f112c99108759157b22fce2011682a4b88216f206702f6a56e960182c00098053ad75f13aa0eafe27046adae63da
* Add .gitlab-ci.yml
* Use | instead of > for multiline commands
This honor new-lines and makes ; unnecessary
* Use ubuntu:bionic as base image
* Move cache initialization before apt-get installs
* Cache apt packages
* Move installation of wget and unzip up as we need it for the cache
* Prevent apt from deleting caches
* Collect test logs into artifact
* Make combine_logs.py always look for the template in the correct dir
* Move final cache stuff into after_script
* Reintroduce PYTHON_DEBUG=1, but only for .travis.yml
* Install jinja2 in Travis builder image
* Enable ChainLocks after quorums have been created
Creating 4 quorums causes a lot of blocks to be created and signed by
ChainLocks, which then causes timeouts later.
* Increase timeout in wallet-dump.py test
The first dumpwallet is quite slow sometimes, which then makes the
later called dumpwallet throw a wallet locked exception.
28479f926f21f2a91bec5a06671c60e5b0c55532 qa: Test bitcond shutdown (João Barbosa)
8d3f46ec3938e2ba17654fecacd1d2629f9915fd http: Remove timeout to exit event loop (João Barbosa)
e98a9eede2fb48ff33a020acc888cbcd83e24bbf http: Remove unnecessary event_base_loopexit call (João Barbosa)
6b13580f4e3842c11abd9b8bee7255fb2472b6fe http: Unlisten sockets after all workers quit (João Barbosa)
18e968581697078c36a3c3818f8906cf134ccadd http: Send "Connection: close" header if shutdown is requested (João Barbosa)
02e1e4eff6cda0bfc24b455a7c1583394cbff6eb rpc: Add wait argument to stop (João Barbosa)
Pull request description:
Fixes#11777. Reverts #11006. Replaces #13501.
With this change the HTTP server will exit gracefully, meaning that all requests will finish processing and sending the response, even if this means to wait more than 2 seconds (current time allowed to exit the event loop).
Another small change is that connections are accepted even when the server is stopping, but HTTP requests are rejected. This can be improved later, especially if chunked replies are implemented.
Briefly, before this PR, this is the order or events when a request arrives (RPC `stop`):
1. `bufferevent_disable(..., EV_READ)`
2. `StartShutdown()`
3. `evhttp_del_accept_socket(...)`
4. `ThreadHTTP` terminates (event loop exits) because there are no active or pending events thanks to 1. and 3.
5. client doesn't get the response thanks to 4.
This can be verified by applying
```diff
// Event loop will exit after current HTTP requests have been handled, so
// this reply will get back to the client.
StartShutdown();
+ MilliSleep(2000);
return "Bitcoin server stopping";
}
```
and checking the log output:
```
Received a POST request for / from 127.0.0.1:62443
ThreadRPCServer method=stop user=__cookie__
Interrupting HTTP server
** Exited http event loop
Interrupting HTTP RPC server
Interrupting RPC
tor: Thread interrupt
Shutdown: In progress...
torcontrol thread exit
Stopping HTTP RPC server
addcon thread exit
opencon thread exit
Unregistering HTTP handler for / (exactmatch 1)
Unregistering HTTP handler for /wallet/ (exactmatch 0)
Stopping RPC
RPC stopped.
Stopping HTTP server
Waiting for HTTP worker threads to exit
msghand thread exit
net thread exit
... sleep 2 seconds ...
Waiting for HTTP event thread to exit
Stopped HTTP server
```
For this reason point 3. is moved right after all HTTP workers quit. In that moment HTTP replies are queued in the event loop which keeps spinning util all connections are closed. In order to trigger the server side close with keep alive connections (implicit in HTTP/1.1) the header `Connection: close` is sent if shutdown was requested. This can be tested by
```
bitcoind -regtest
nc localhost 18443
POST / HTTP/1.1
Authorization: Basic ...
Content-Type: application/json
Content-Length: 44
{"jsonrpc": "2.0","method":"stop","id":123}
```
Summing up, this PR:
- removes explicit event loop exit — event loop exits once there are no active or pending events
- changes the moment the listening sockets are removed — explained above
- sends header `Connection: close` on active requests when shutdown was requested which is relevant when it's a persistent connection (default in HTTP 1.1) — libevent is aware of this header and closes the connection gracefully
- removes event loop explicit break after 2 seconds timeout
Tree-SHA512: 4dac1e86abe388697c1e2dedbf31fb36a394cfafe5e64eadbf6ed01d829542785a8c3b91d1ab680d3f03f912d14fc87176428041141441d25dcb6c98a1e069d8
* Use `wait_until` in sporks.py
* Drop unused spork functions in `dip3-deterministicmns.py`
* Use `wait_until` in multikeysporks.py
* scripted-diff: Rename `*_test_spork_state` to `*_test_spork_value` in multikeysporks.py to better match actual functionality
-BEGIN VERIFY SCRIPT-
sed -i 's/_test_spork_state/_test_spork_value/g' test/functional/multikeysporks.py
-END VERIFY SCRIPT-
* Drop `get_mnsync_status`, `wait_to_sync` and `sync_masternodes` and introduce `force_finish_mnsync` for MNs only
* Use `force_finish_mnsync` from util.py in dip3-deterministicmns.py and drop local unused functions
Also move the call, `force_finish_mnsync` should be called before `connect_nodes_bi`
e97b113b04 [tests] Change invalidblockrequest to use BitcoinTestFramework (John Newbery)
2b7064eda7 [tests] Fix flake8 warnings in invalidblockrequest (John Newbery)
54b8c580b7 [test] Fix nits leftover from 11771 (Conor Scott)
Pull request description:
Builds on #11771. Please review that PR first
Next step in #10603.
- first commit tidies up invalidblockrequest.py
- second commit removes usage of ComparisonTestFramework
Tree-SHA512: 14b10c09c8c0ebef4a9176eb5b883a275d04c096785ee31b84ef594eed346ec6344d7ed32184c5fb397e744725df3911f45cdfadd0810e5a52eaa256084e3456
95e2e9a [tests] Change invalidtxrequest to use BitcoinTestFramework (John Newbery)
359d067 [tests] Fix flake8 warnings in invalidtxrequest (John Newbery)
c32cf9f [tests] Add P2PDataStore class (John Newbery)
cc046f6 [tests] Reduce NodeConn connection logging from info to debug (John Newbery)
Pull request description:
Next step in #10603
- first commit changes log level for an internal log from INFO to DEBUG. (Not really related, but I started finding the INFO level logging annoying when debuging test failures)
- second commit introduces a `P2PStub` class - a subclass of `NodeConnCB` which has its own block and tx store and responds appropriately to getdata requests. Not all the functionality is used in `invalidtxrequest.py`, but will be used in `invalidblockrequest.py` and `p2p-fullblocktest` when those are changed to use `BitcoinTestFramework`
- third commit tidies up `invalidtxrequest.py`
- fourth commit removes usage of `ComparisonTestFramework`
Tree-SHA512: f3085c73c15d6ce894e401490bce8a7fa7cf52b0c9d135ff7e351f1f6f517c99accab8588fcdc443f39ea8315329aaabd66b2baa32499df5a774737882030373
5c8ff26 [tests] Add NetworkThread assertions (John Newbery)
34e08b3 [tests] Fix network threading in functional tests (John Newbery)
74e64f2 [tests] Use network_thread_start() in tests. (John Newbery)
5fc6e71 [tests] Add network_thread_ utility functions. (John Newbery)
Pull request description:
Add assert that only one NetworkThread exists at any time in functional tests, and fix cases where that wasn't true.
fixes#11776
Tree-SHA512: fe5d1c59005f94bf66e11bb23ccf274b1cd9913741b56ea11dbcd21db4cc0b53b4413c0c4c16dbcd6ac611adad5e5cc2baaa39720598ce7b6393889945d06298
faaa7db qa: Only allow disconnecting all NodeConns (MarcoFalke)
Pull request description:
Disconnecting the connection with `index=0` makes no sense when there are more than one connections, as the list "rotates around" and populates index 0 after `del`.
Just disconnect all NodeConns in any case.
Tree-SHA512: e5cf540823fccb31634b5a11501f54222be89862e80ccafc28bc06726480f8d2153b8c1b6f859fa6a6d087876251d48a6c6035bccdaaf16831e300bc17ff613d
32ae82f5c [tests] use TestNode p2p connection in tests (John Newbery)
5e5725cc2 [tests] Add p2p connection to TestNode (John Newbery)
b86c1cd20 [tests] fix TestNode.__getattr__() method (John Newbery)
Pull request description:
Final two steps of #10082 : Adding the "mininode" P2P interface to `TestNode`
This PR adds the mininode P2P interface to `TestNode`. It simplifies the process for opening a P2P connection to the node-under-test from this:
```python
node0 = NodeConnCB()
connections = []
connections.append(NodeConn('127.0.0.1', p2p_port(0), self.nodes[0], node0))
node0.add_connection(connections[0])
```
to this:
```python
self.nodes[0].add_p2p_connection(p2p_conn_type=NodeConnCB)
```
The first commit adds the infrastructure to `test_node.py`. The second updates the individual test cases to use it. Can be separated if this is too much review for one PR.
Tree-SHA512: 44f1a6320f44eefc70489ae8350c6a16ad1a6035e4b9b7bafbdf19f5905ed0e2db85beaaf4758eec3059dd89a375a47a45352a029f39f57a86ab38a9ae66650e
* Add timeout params to wait_for*_chainlock methods
* Give chainlocks more time in specific case
* Add logs to llmq-chainlock.py
* Replace wait_for_chainlocked_tip_all_nodes with wait_for_chainlocked_block_all_nodes
wait_for_chainlocked_tip_all_nodes did wait for the tip of each individual
node, which would not necessarily be the same. We should only allow to
explicitly specify which block to wait for.
* Get rid of wait_for_chainlocked_tip
Same as with wait_for_chainlocked_tip_all_nodes
This speeds up assumevalid.py from 22s to 7s on my machine. On travis, this
should be an improvement of a few minutes. Without this, Travis actually
fails due to block download timeouts.
* scripted-diff: Rename `wait_for_chainlock*` test functions
-BEGIN VERIFY SCRIPT-
sed -i 's/wait_for_chainlock_tip_all_nodes(/wait_for_chainlocked_tip_all_nodes(/g' test/functional/*.py
sed -i 's/wait_for_chainlock_tip(/wait_for_chainlocked_tip(/g' test/functional/*.py
sed -i 's/wait_for_chainlock(/wait_for_chainlocked_block(/g' test/functional/*.py
sed -i 's/wait_for_chainlock /wait_for_chainlocked_block /g' test/functional/*.py
-END VERIFY SCRIPT-
* Move `wait_for_*chainlock*` functions from individual tests to DashTestFramework
* Use `wait_until` in most Dash-specific `wait_for*` functions instead of custom timers
* Cleanup p2p-instantsend.py
Bump mocktime before generating new blocks and generate a few blocks at the end of test_mempool_doublespend to clean things up
* Update test/functional/p2p-instantsend.py
Co-Authored-By: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
* Fix `wait_for_instantlock` to make it fail if instantlock wasn't aquired, use `wait_until`
Currently it simply returns False if islock failed but that's not the way we use it (we never check results).
* Wait for txes to propagate before checking for instantlock
4526d21 Add test for multiwallet batch RPC calls (Russell Yanofsky)
74182f2 Add missing batch rpc calls to python coverage logs (Russell Yanofsky)
505530c Add missing multiwallet rpc calls to python coverage logs (Russell Yanofsky)
9f67646 Make AuthServiceProxy._batch method usable (Russell Yanofsky)
e02007a Limit AuthServiceProxyWrapper.__getattr__ wrapping (Russell Yanofsky)
edafc71 Fix uninitialized URI in batch RPC requests (Russell Yanofsky)
Pull request description:
This fixes "Wallet file not specified" errors when making batch wallet RPC calls with more than one wallet loaded. This issue was reported by @NicolasDorier in https://github.com/bitcoin/bitcoin/issues/11257
Request URI is not used for anything except multiwallet request dispatching, so this change has no other effect.
Tree-SHA512: b3907af48a6323f864bb045ee2fa56b604188b835025ef82ba3d81673244c04228d796323cec208a676e7cd578a95ec7c7ba1e84d0158b93844d5dda8f6589b9
659b206 Make listsinceblock refuse unknown block hash (Russell Yanofsky)
Pull request description:
Change suggested by @theuni who noticed listsinceblock would ignore invalid block hashes causing it to return a completely unfiltered list of transactions.
Tree-SHA512: 3c8fb160265780d1334e856e853ab48e2e18372b8f1fc71ae480c3f45317048cc1fee0055d5c58031981a91b9c2bdbeb8e49a889d04ecba61729ce8109f2ce3f
f3d4adf Make p2p-acceptablock not an extended test (Matt Corallo)
00dcda6 [qa] test that invalid blocks on an invalid chain get a disconnect (Matt Corallo)
015a525 Reject headers building on invalid chains by tracking invalidity (Matt Corallo)
932f118 Accept unrequested blocks with work equal to our tip (Matt Corallo)
3d9c70c Stop always storing blocks from whitelisted peers (Matt Corallo)
3b4ac43 Rewrite p2p-acceptblock in preparation for slight behavior changes (Matt Corallo)
Pull request description:
@sdaftuar pointed out that the version in #11487 was somewhat DoS-able as someone could feed you a valid chain that forked off the the last checkpoint block and force you to do lots of work just walking backwards across blocks for each new block they gave you. We came up with a few proposals but settled on the one implemented here as likely the simplest without obvious DoS issues. It uses our existing on-load mapBlockIndex walk to make sure everything that descends from an invalid block is marked as such, and then simply caches blocks which we attempted to connect but which were found to be invalid. To avoid DoS issues during IBD, this will need to depend on #11458.
Includes tests from #11487.
Tree-SHA512: 46aff8332908e122dae72ceb5fe8cd241902c2281a87f58a5fb486bf69d46458d84a096fdcb5f3e8e07fbcf7466232b10c429f4d67855425f11b38ac0bf612e1
e065249 Add unit test for outbound peer eviction (Suhas Daftuar)
5a6d00c Permit disconnection of outbound peers on bad/slow chains (Suhas Daftuar)
c60fd71 Disconnecting from bad outbound peers in IBD (Suhas Daftuar)
Pull request description:
The first commit will disconnect an outbound peer that serves us a headers chain with insufficient work while we're in IBD.
The second commit introduces a way to disconnect outbound peers whose chains fall out of sync with ours:
For a given outbound peer, we check whether their best known block (which is known from the blocks they announce to us) has at least as much work as our tip. If it doesn't, we set a 20 minute timeout, and if we still haven't heard about a block with as much work as our tip had when we set the timeout, then we send a single getheaders message, and wait 2 more minutes. If after two minutes their best known block has insufficient work, we disconnect that peer.
We protect 4 of our outbound peers (who provide some "good" headers chains, ie a chain with at least as much work as our tip at some point) from being subject to this logic, to prevent excessive network topology changes as a result of this algorithm, while still ensuring that we have a reasonable number of nodes not known to be on bogus chains.
We also don't require our peers to be on the same chain as us, to prevent accidental partitioning of the network in the event of a chain split. Note that if our peers are ever on a more work chain than our tip, then we will download and validate it, and then either reorg to it, or learn of a consensus incompatibility with that peer and disconnect. This PR is designed to protect against peers that are on a less work chain which we may never try to download and validate.
Tree-SHA512: 2e0169a1dd8a7fb95980573ac4a201924bffdd724c19afcab5efcef076fdbe1f2cec7dc5f5d7e0a6327216f56d3828884f73642e00c8534b56ec2bb4c854a656
01b52ce Add comment explaining forced processing of compact blocks (Suhas Daftuar)
08fd822 qa: add test for minchainwork use in acceptblock (Suhas Daftuar)
ce8cd7a Don't process unrequested, low-work blocks (Suhas Daftuar)
Pull request description:
A peer could try to waste our resources by sending us unrequested blocks with
low work (eg to fill up our disk). Since e265200 we no longer request blocks until we
know we're on a chain with more than nMinimumChainWork (our anti-DoS
threshold), but we would still process unrequested blocks that had more work
than our tip (which generally has low-work during IBD), even though we may not
yet have found a headers chain with sufficient work.
Fix this and add a test.
Tree-SHA512: 1a4fb0bbd78054b84683f995c8c3194dd44fa914dc351ae4379c7c1a6f83224f609f8b9c2d9dde28741426c6af008ffffea836d21aa31a5ebaa00f8e0f81229e
eac64bb7a [qa] Test nMinimumChainWork (Suhas Daftuar)
0311836f6 Allow setting nMinimumChainWork on command line (Suhas Daftuar)
Pull request description:
As discussed briefly here: https://botbot.me/freenode/bitcoin-core-dev/2017-02-28/?msg=81712308&page=4
This adds a hidden command line option for setting `nMinimumChainWork`, which allows us to test this parameter in our functional tests, as well as allowing for niche use cases like syncing nodes that are otherwise disconnected from the network.
See also #10345, which proposes a new use of `nMinimumChainWork`.
Tree-SHA512: fe4d8f4f289697615c98d8760f1cc74c076110310ea0b5b875fcab78c127da9195b4eb84148aebacc7606c246e5773d3f13bd5d9559d0a8bffac20a3a28c62df
fafa003 qa: Remove never used return value of sync_with_ping (MarcoFalke)
fa9de37 qa: Make tmpdir option an absolute path (MarcoFalke)
Pull request description:
This should fix issues with the multiwallet test and its symlinks
when the tmpdir is a relative path.
Rather than fixing os.symlink to work with paths relative to a
directory descriptor, which does not work on Windows, normalize
the path instead.
Tree-SHA512: 189690f3d065ea2f0f48e06775c86d513d0916c7c86312432e8e16df160e65539e288c2bd53d49a4180735fa940f6fcd52b506ccd7d9815651a9b1a69850dda6
478a89c Avoid opening copied wallet databases simultaneously (Russell Yanofsky)
Pull request description:
Make sure wallet databases have unique fileids. If they don't, throw an error. BDB caches do not work properly when more than one open database has the same fileid, because values written to one database may show up in reads to other databases.
Bitcoin will never create different databases with the same fileid, but users can create them by manually copying database files.
BDB caching bug was reported by @dooglus in https://github.com/bitcoin/bitcoin/issues/11429
Tree-SHA512: e7635dc81a181801f42324b72fe9e0a2a7dd00b1dcf5abcbf27fa50938eb9a1fc3065c2321326c3456c48c29ae6504353b02f3d46e6eb2f7b09e46d8fe24388d
5d465e396 Ensure backupwallet fails when attempting to backup to source file (Tomas van der Wansem)
Pull request description:
Previous behaviour was to destroy the wallet (to zero-length)
This fixes#11375
Tree-SHA512: bfd1738659b15e3f23b6bbdf55ec12269c62c820bf701daec19500b52bd5845bb5516733c6f76f36197eb155182a8a35dc239ad4de2ef1e59bbb0f124a455759
* Make sure chainlocks and blocks are propagated in llmq-is-cl-conflicts.py before moving to next steps
Add few comments here and there to clarify what's actually going on under the hood
* Simplify
