* Merge #13134: net: Add option `-enablebip61` to configure sending of BIP61 notifications
87fe292d897e09e176ac7e254144466c319cc9ac doc: Mention disabling BIP61 in bips.md (Wladimir J. van der Laan)
fe16dd8226d924f44432c5b5014aa49ff45c82ff net: Add option `-enablebip61` to configure sending of BIP61 notifications (Wladimir J. van der Laan)
Pull request description:
This commit adds a boolean option `-peersendreject`, defaulting to `1`, that can be used to disable the sending of [BIP61](https://github.com/bitcoin/bips/blob/master/bip-0061.mediawiki) `reject` messages. This functionality has been requested for various reasons:
- security (DoS): reject messages can reveal internal state that can be used to target certain resources such as the mempool more easily.
- bandwidth: a typical node sends lots of reject messages; this counts against upstream bandwidth. Also the reject messages tend to be larger than the message that was rejected.
On the other hand, reject messages can be useful while developing client software (I found them indispensable while creating bitcoin-submittx), as well as for our own test cases, so whatever the default becomes on the long run, IMO the functionality should be retained as option. But that's a discussion for later, for now it's simply a node operator decision.
Also adds a RPC test that checks the functionality.
Tree-SHA512: 9488cc53e13cd8e5c6f8eb472a44309572673405c1d1438c3488f627fae622c95e2198bde5ed7d29e56b948e2918bf1920239e9f865889f4c37c097c37a4d7a9
* 0.17 -> 0.16
Signed-off-by: Pasta <pasta@dashboost.org>
* tx1 -> base_ tx fixing 13134
Signed-off-by: Pasta <pasta@dashboost.org>
* move added bip61 message checking up
Signed-off-by: Pasta <pasta@dashboost.org>
* Dash specific code, only send reject messages if bip61 is enabled
Signed-off-by: Pasta <pasta@dashboost.org>
* Fix invalidtxrequest.py
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
b21244e0be Updating benchmarkmarking.md with an updated sample output and help options (Jeff Rade)
Pull request description:
This PR is just a documentation update for someone (or myself) that looks into finishing up #7883 in the future.
Looked through #7883 and appears [ryanofsky's PR](https://github.com/bitcoin/bitcoin/pull/8873) setup the benchmarks, but there are `FIXME` comments to pull in data from `test/` to get a larger data set (assuming reason why 7883 is still open).
Tree-SHA512: d758efc659c75f2b3ceb376f5a466c4234354077e4671ac3eb901c082c4e519ce5ff592cea4742711050b4ce56a1b65ef69433dd74e7db3eb11a8567d517d9e2
* scripted-diff: Replace #include "" with #include <> (ryanofsky)
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* scripted-diff: Replace #include "" with #include <> (Dash Specific)
-BEGIN VERIFY SCRIPT-
for f in \
src/bls/*.cpp \
src/bls/*.h \
src/evo/*.cpp \
src/evo/*.h \
src/governance/*.cpp \
src/governance/*.h \
src/llmq/*.cpp \
src/llmq/*.h \
src/masternode/*.cpp \
src/masternode/*.h \
src/privatesend/*.cpp \
src/privatesend/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* build: Remove -I for everything but project root
Remove -I from build system for everything but the project root,
and built-in dependencies.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/Makefile.test.include
* qt: refactor: Use absolute include paths in .ui files
* qt: refactor: Changes to make include paths absolute
This makes all include paths in the GUI absolute.
Many changes are involved as every single source file in
src/qt/ assumes to be able to use relative includes.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/qt/dash.cpp
# src/qt/optionsmodel.cpp
# src/qt/test/rpcnestedtests.cpp
* test: refactor: Use absolute include paths for test data files
* Recommend #include<> syntax in developer notes
* refactor: Include obj/build.h instead of build.h
* END BACKPORT #11651 Remove trailing whitespace causing travis failure
* fix backport 11651
Signed-off-by: Pasta <pasta@dashboost.org>
* More of 11651
* fix blockchain.cpp
Signed-off-by: pasta <pasta@dashboost.org>
* Add missing "qt/" in includes
* Add missing "test/" in includes
* Fix trailing whitespaces
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: MeshCollider <dobsonsa68@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
aac6b3f067 Update files.md for new wallets/ subdirectory (MeshCollider)
b67342906c Cleanups for walletdir PR (MeshCollider)
Pull request description:
This addresses the remaining nits from https://github.com/bitcoin/bitcoin/pull/11466
- Updates `doc/files.md` with respect to the new default wallet directory
- Fixes @promag and @laanwj's error message nit, and Jonas' release notes nit
- ~Addresses @laanwj's net-specific wallet subdirectory concern in the case that a walletdir is specified~
- Changes the #includes from "" to <> style after #11651
Tree-SHA512: b86bf5fdc4de54c1b0f65b60a83af3cf82b35d216ce9c0de724803bfba6934796238b6c412659dcc29ae2e3e856d4eb97ae777c80f36f4089d8acecfddefe9aa
89f0312 Remove redundant pwallet nullptr check (Matt Corallo)
c4784b5 Add a dev notes document describing the new wallet RPC blocking (Matt Corallo)
3ea8b75 Give ZMQ consistent order with UpdatedBlockTip on scheduler thread (Matt Corallo)
cb06edf Fix wallet RPC race by waiting for callbacks in sendrawtransaction (Matt Corallo)
e545ded Also call other wallet notify callbacks in scheduler thread (Matt Corallo)
17220d6 Use callbacks to cache whether wallet transactions are in mempool (Matt Corallo)
5d67a78 Add calls to CWallet::BlockUntilSyncedToCurrentChain() in RPCs (Matt Corallo)
5ee3172 Add CWallet::BlockUntilSyncedToCurrentChain() (Matt Corallo)
0b2f42d Add CallFunctionInQueue to wait on validation interface queue drain (Matt Corallo)
2b4b345 Add ability to assert a lock is not held in DEBUG_LOCKORDER (Matt Corallo)
0343676 Call TransactionRemovedFromMempool in the CScheduler thread (Matt Corallo)
a7d3936 Add a CValidationInterface::TransactionRemovedFromMempool (Matt Corallo)
Pull request description:
Based on #10179, this effectively reverts #9583, regaining most of the original speedups of #7946.
This concludes the work of #9725, #10178, and #10179.
See individual commit messages for more information.
Tree-SHA512: eead4809b0a75d1fb33b0765174ff52c972e45040635e38cf3686cef310859c1e6b3c00e7186cbd17374c6ae547bfbd6c1718fe36f26c76ba8a8b052d6ed7bc9
3121d76 doc: Update release notes for share/rpcauth/rpcauth.py rename (Henrik Jonsson)
3fdb297 Rename rpcuser.py to rpcauth.py (Henrik Jonsson)
Pull request description:
This script creates `rpcauth` entries for bitcoin.conf, not the deprecated `rpcuser` entry, so this changes the name of the script to match.
As discussed in #11830.
Tree-SHA512: cd71c2a4043ef1381d3810b057cc83be3fac612df576b91b683ef91fdb7998c534b3b97a3313845eb867dc4bf7cc42a1250474d2261ab3f9ed2f884ca8ebd9f4
de74c62 [Doc] Update bip.md, add support for BIP 159 (Jonas Schnelli)
e054d0e [QA] Add node_network_limited test (Jonas Schnelli)
bd09416 Avoid leaking the prune height through getdata (fingerprinting countermeasure) (Jonas Schnelli)
27df193 Always set NODE_NETWORK_LIMITED bit (Jonas Schnelli)
7caba38 Add NODE_NETWORK_LIMITED flags and min block amount constants (Jonas Schnelli)
Pull request description:
Extracted from #10387.
Does implement BIP159, but only the signalling part. No connections are made to NODE_NETWORK_LIMITED in this PR.
The address relay and connection work (the more complicated part) can then be separated (probably in #10387).
Tree-SHA512: e3218eb4789a9320b0f42dc10f62d30c13c49bdef00443fbe653bee22933477adcfc1cf8f6a95269324560b5721203ed41f3c5e2dd8a98ec2791f6a9d8346b1a
aece8a463 (finally) remove getinfo in favor of more module-specific infos (Matt Corallo)
Pull request description:
I see no reason not to have done this in 0.13, let alone for 0.15.
Tree-SHA512: ed3e36f99e9cb90304089e5957ddfbf74141e3e77d850e498e9e45dd8bc1deb9fe36b3fec4c43243023268670a45808de3c23d660df76fa27db6688814c464a5
5ff01c236 [docs] Add instructions for lcov coverage report generation (James O'Beirne)
Pull request description:
After rediscovering the `lcov` report generation recipe one too many times, it seemed prudent to write some doc.
Tree-SHA512: 20e1b5f51ecd39e14bd67986a2c1578fb7da03a50625366eaca35b201db66aef99cd4a5456df3aaca5d2d66b18ed7d2e8eb8f3bd9c7aaf9af48164d9bac38931
204cc98 fix link error (Shooter)
Pull request description:
The `perform-gitian-builds` is not exist,
replace `perform-gitian-builds` with `setup-and-perform-gitian-builds`.
Tree-SHA512: c4f3fb4b6ae502a2e7a6857d3075734d493f549871b80ec00a2733ee689b00f98aa67ce7c3b7facf1ae4949b7845e1e2ef6f727aeca0c88c00b46d77b4d7e570
90ab62c45 [docs] document scripted-diff (John Newbery)
Pull request description:
Document scripted-diffs in developer-notes.md
I sometimes comment on PRs that a scripted-diff would be appropriate, but I don't have any documentation to point to. Fix that.
Tree-SHA512: 7d4a14b9217c812e4c27601e5e6dd8054cf5104cd20ecbe1ec0a84c217cc4b0645b7c0d2e3a89fdd4d059cafbc388acbddba75a430308f8279200b9383e009de
* build: use osslsigncode 2.0 in gitian
The original osslsigncode project (https://sourceforge.net/projects/osslsigncode/) has been marked as abandonware,
"This is now - and has been for a long while - abandonware. Feel free to create your own forks etc.".
However, a fork at https://github.com/mtrojnar/osslsigncode has emerged that has incorporated
theuni's patches, updated the tool to work with OpenSSL 1.1 and made other improvements.
This commit switches the windows signer descriptor to use this new version of osslsigncode.
* Fixed wget call in gitian-build.py
Co-authored-by: Michael <fanquake@gmail.com>
Co-authored-by: willyk <k.o.willy@gmail.com>
745d2e3 Clean up getbalance RPC parameter handling (Russell Yanofsky)
fd5d71e Update developer notes after params.size() cleanup (Russell Yanofsky)
e067673 Avoid treating null RPC arguments different from missing arguments (Russell Yanofsky)
e666efc Get rid of redundant RPC params.size() checks (Russell Yanofsky)
Pull request description:
This is a followup to #10783.
- The first commit doesn't change behavior at all, just simplifies code.
- The second commit just changes RPC methods to treat null arguments the same as missing arguments instead of throwing type errors.
- The third commit updates developer notes after the cleanup.
- The forth commit does some additional code cleanup in `getbalance`.
Followup changes that should happen in future PRs:
- [ ] Replace uses of `.isTrue()` with calls to `.get_bool()` so numbers, objects, and strings cause type errors instead of being interpreted as false. https://github.com/bitcoin/bitcoin/pull/11050#discussion_r133850525
- [ ] Add braces around if statements. https://github.com/bitcoin/bitcoin/pull/11050#discussion_r133851133
- [ ] Maybe improve UniValue type error exceptions and eliminate RPCTypeCheck and RPCTypeCheckArgument functions. https://github.com/bitcoin/bitcoin/pull/11050#discussion_r133829303
Tree-SHA512: e72f696011d20acc0778e996659e41f9426bffce387b29ff63bf59ad1163d5146761e4445b2b9b9e069a80596a57c7f4402b75a15d5d20f69f775ae558cf67e9
More of 11050
Fixes for bitcoin#11050 backport
Fixes for bitcoin#11050
Fix masternode_winners RPC help check and revert few params[x].isNull() changes
RPC: resolve index and '!' problems
Co-Authored-By: UdjinM6 <UdjinM6@users.noreply.github.com>
f1708ef89 Add recommendation: By default, declare single-argument constructors `explicit` (practicalswift)
Pull request description:
This is a follow-up to the now merged #10969.
Add recommendation:
> By default, declare single-argument constructors `explicit`.
>
> - *Rationale*: This is a precaution to avoid unintended conversions that might arise when single-argument constructors are used as implicit conversion functions.
>
Tree-SHA512: 1ceb1008a7863ebd0f09ba9c06b4e28b3b03265d7381f9d0c8bd4be1663d5d0392de0ecd811027aa27c0d962723674b245b3c165a437942a776f3525db39d36b
06a3aec Docs: Hash in ZMQ hash is raw bytes, not hex (Karel Bílek)
Pull request description:
Transaction hex cannot be in hexadecimal, that would be 64 bytes. In reality it's just raw bytes.
Tree-SHA512: 0f884c73a370be1fe39a1354e2b7ef02d4ff27348dbb8d35a77bbd309f417024959589b28a560b2c9e2713074b90534771fe8c29ff8c0ee1999966997a4827a0
bea8e9e Document the preference of nullptr over NULL or (void*)0 (practicalswift)
Pull request description:
Document the preference of `nullptr` over `NULL` or `(void*)0`.
After this commit:
```
$ git grep "[^A-Za-z_]NULL[^A-Za-z_]" | grep -vE '(leveldb|univalue|secp256k1|torcontrol|NULL certificates|ctaes|release-notes|patches|configure.ac|developer-notes)'
$
```
Some context:
* `NULL → nullptr` was handled in the recently merged PR #10483
* `0 → nullptr` was handled in the recently merged PR #10645
Tree-SHA512: f863096aa4eb21705910f89713ca9cc0d83c6df2147e3d3530c3e1589b96f6c68de8755dcf37d8ce99ebda3cfb69805e00eab13bf65424aaf16170e9dda3958a
d201e40 Update init.md: Fix section numbering. (Carl Dong)
72a184a Update init.md: Fix line breaks in section 3b. (Carl Dong)
Pull request description:
Trivial commit that fixes Markdown line breaks in `docs/init.md`. Markdown line breaks take the form of two spaces, which is hard to spot when viewing raw text but visible when previewing on GitHub. Line 72-73 of `docs/init.md` did not conform to the rest the rest of the documentation, and is corrected in this PR.
Tree-SHA512: e5f048bd4e9e1e68372c95881f68b157a3c205d4dbcc6ccd24f2c0171b84d8cf7907d1835c6754ce57f35f9463820353ad7ae70c2e3de20136382ea3ee8bc4ff
f42fc1d50 doc: spelling fixes (klemens)
Pull request description:
patch contains some spelling fixes ( just in comments ) as found by a bot ( http://www.misfix.org, https://github.com/ka7/misspell_fixer ).
Tree-SHA512: ba6046cfcd81b0783420daae7d776be92dd7b85a593e212f8f1b4403aca9b1b6af12cef7080d4ea5ed4a14952fd25e4300109a59c414e08f5395cdb9947bb750
4a7a4ff developer-notes: add reference to snake_case and PascalCase (Marko Bencun)
Pull request description:
CamelCase is ambiguous as it refers to both lowerCamelCase and
UpperCamelCase, whereas PascalCase is only UpperCamelCase.
Tree-SHA512: 8eebc42931f10ed8fd314c6b8a2a936aa18fce358a50bb8ae580404fb06a97b8fece12c0398170a9a8ddce250d1e79ece3774cf8a36ac604d67b2797b54aa005
* build: use osslsigncode 2.0 in gitian
The original osslsigncode project (https://sourceforge.net/projects/osslsigncode/) has been marked as abandonware,
"This is now - and has been for a long while - abandonware. Feel free to create your own forks etc.".
However, a fork at https://github.com/mtrojnar/osslsigncode has emerged that has incorporated
theuni's patches, updated the tool to work with OpenSSL 1.1 and made other improvements.
This commit switches the windows signer descriptor to use this new version of osslsigncode.
* Fixed wget call in gitian-build.py
Co-authored-by: Michael <fanquake@gmail.com>
Co-authored-by: willyk <k.o.willy@gmail.com>
* Drop (test.)dnsseed.masternode.io
* makeseeds.py
mainnet 1185193, testnet 225964
* generate-seeds.py
* Update tor.md with live onion nodes
All old nodes are down
