232f96f5c8a3920c09db92f4dbac2ad7d10ce8cf doc: Add release notes for -avoidpartialspends (Karl-Johan Alm)
e00b4699cc6d2ee5697d38dd6607eb2631c9b77a clean-up: Remove no longer used ivars from CInputCoin (Karl-Johan Alm)
43e04d13b1ffc02b1082176e87f420198b40c7b1 wallet: Remove deprecated OutputEligibleForSpending (Karl-Johan Alm)
0128121101fb3ee82f3abd3973a967a4226ffe0e test: Add basic testing for wallet groups (Karl-Johan Alm)
59d6f7b4e2f847ec1f2ff46c84e6157655984f85 wallet: Switch to using output groups instead of coins in coin selection (Karl-Johan Alm)
87ebce25d66952f5ce565bb5130dcf5e24049872 wallet: Add output grouping (Karl-Johan Alm)
bb629cb9dc567cc819724d9f4852652926e60cbf Add -avoidpartialspends and m_avoid_partial_spends (Karl-Johan Alm)
65b3eda458221644616d0fdd6ba0fe01bdbce893 wallet: Add input bytes to CInputCoin (Karl-Johan Alm)
a443d7a0ca333b0bae63e04b5d476f9ad9c7aeac moveonly: CoinElegibilityFilter into coinselection.h (Karl-Johan Alm)
173e18a289088c6087ba6fac708e322aa63b7a94 utils: Add insert() convenience templates (Karl-Johan Alm)
Pull request description:
This PR adds an optional (off by default) `-avoidpartialspends` flag, which changes coin select to use output groups rather than outputs, where each output group corresponds to all outputs with the same destination.
It is a privacy improvement, as each time you spend some output, any other output that is publicly associated with the destination (address) will also be spent at the same time, at the cost of fee increase for cases where coin select without group restriction would find a more optimal set of coins (see example below).
For regular use without address reuse, this PR should have no effect on the user experience whatsoever; it only affects users who, for some reason, have multiple outputs with the same destination (i.e. address reuse).
Nodes with this turned off will still try to avoid partial spending, if the fee of the resulting transaction is not greater than the fee of the original transaction.
Example: a node has four outputs linked to two addresses `A` and `B`:
* 1.0 btc to `A`
* 0.5 btc to `A`
* 1.0 btc to `B`
* 0.5 btc to `B`
The node sends 0.2 btc to `C`. Without `-avoidpartialspends`, the following coin selection will occur:
* 0.5 btc to `A` or `B` is picked
* 0.2 btc is output to `C`
* 0.3 - fee is output to (unique change address)
With `-avoidpartialspends`, the following will instead happen:
* Both of (0.5, 1.0) btc to `A` or `B` is picked (one or the other pair)
* 0.2 btc is output to `C`
* 1.3 - fee is output to (unique change address)
As noted, the pro here is that, assuming nobody sends to the address after you spend from it, you will only ever use one address once. The con is that the transaction becomes slightly larger in this case, because it is overpicking outputs to adhere to the no partial spending rule.
This complements #10386, in particular it addresses @luke-jr and @gmaxwell's concerns in https://github.com/bitcoin/bitcoin/pull/10386#issuecomment-300667926 and https://github.com/bitcoin/bitcoin/pull/10386#issuecomment-302361381.
Together with `-avoidreuse`, this fully addresses the concerns in #10065 I believe.
Tree-SHA512: 24687a4490ba59cf4198ed90052944ff4996653a4257833bb52ed24d058b3e924800c9b3790aeb6be6385b653b49e304453e5d7ff960e64c682fc23bfc447621
# Conflicts:
# src/Makefile.am
# src/bench/coin_selection.cpp
# src/wallet/coincontrol.h
# src/wallet/coinselection.cpp
# src/wallet/coinselection.h
# src/wallet/init.cpp
# src/wallet/test/coinselector_tests.cpp
# src/wallet/wallet.cpp
# src/wallet/wallet.h
# test/functional/test_runner.py
* refac/bls: use default for default constructor
* refac/bls: initialize doneCount via default member initializer
* refac/bls: initialize batchCount and verifyCount via default member initializer
* refac/bls: remove unused parameter
* refac/bls: add __attribute__((unused)) where functions are unused
* refac/bls: remove unused lambda this capture
* refac/bls: Move assignment operators should be marked noexcept
* refac/bls: Single-argument constructors must be marked explicit to avoid unintentional implicit conversions
* refac/bls: fix compilation due to explicit constructor
60ebc7da4c trivial: Mark overrides as such. (Daniel Kraft)
Pull request description:
This trivial change adds the `override` keyword to some methods that override virtual base class / interface methods. This ensures that any future changes to the interface's method signatures which are not correctly mirrored in the subclasses will break at compile time with a clear error message, rather than at runtime.
Tree-SHA512: cc1bfa5f03b5e29d20e3eab07b0b5fa2f77b47f79e08263dbff43e4f463e9dd8f4f537e2c8c9b6cb3663220dcf40cfd77723cd9fcbd623c9efc90a4cd44facfc
f9ee0f37c28f604bc82dab502ce229c66ef5b3b9 Add comments to CustomUintFormatter (Pieter Wuille)
4eb5643e3538863c9d2ff261f49a9a1b248de243 Convert everything except wallet/qt to new serialization (Pieter Wuille)
2b1f85e8c52c8bc5a17eae4c809eaf61d724af98 Convert blockencodings_tests to new serialization (Pieter Wuille)
73747afbbeb013669faf4c4d2c0903cec4526fb0 Convert merkleblock to new serialization (Pieter Wuille)
d06fedd1bc26bf5bf2b203d4445aeaebccca780e Add SER_READ and SER_WRITE for read/write-dependent statements (Russell Yanofsky)
6f9a1e5ad0a270d3b5a715f3e3ea0911193bf244 Extend CustomUintFormatter to support enums (Russell Yanofsky)
769ee5fa0011ae658770586442715452a656559d Merge BigEndian functionality into CustomUintFormatter (Pieter Wuille)
Pull request description:
The next step of changes from #10785.
This:
* Adds support for enum serialization to `CustomUintFormatter`, used in `CAddress` for service flags.
* Merges `BigEndian` into `CustomUintFormatter`, used in `CNetAddr` for port numbers.
* Converts everything (except wallet and gui) to use the new serialization framework.
ACKs for top commit:
MarcoFalke:
re-ACK f9ee0f37c2, only change is new documentation commit for CustomUintFormatter 📂
ryanofsky:
Code review ACK f9ee0f37c28f604bc82dab502ce229c66ef5b3b9. Just new commit adding comment since last review
jonatack:
Code review re-ACK f9ee0f37c28f604bc82dab502ce229c6 only change since last review is an additional commit adding Doxygen documentation for `CustomUintFormatter`.
Tree-SHA512: e7a0a36afae592d5a4ff8c81ae04d858ac409388e361f2bc197d9a78abca45134218497ab2dfd6d031e0cce0ca586cf857077b7c6ce17fccf67e2d367c1b6cd4
c3f34d06be Make it clear which functions that are intended to be translation unit local (practicalswift)
Pull request description:
Make it clear which functions that are intended to be translation unit local.
Do not share functions that are meant to be translation unit local with other translation units. Use internal linkage for those consistently.
Tree-SHA512: 05eebd233d5cfbf6116724eec3a99b465bf534ca220f2b6f5e56341a7da41387454d3cb6ceadd8ab6714a5df94069e4ad0dcab8801ccc7e8949be7199a19fb53
8c2d695c4a util: Store debug log file path in BCLog::Logger member. (Jim Posen)
8e7b961388 scripted-diff: Rename BCLog::Logger member variables. (Jim Posen)
1eac317f25 util: Refactor GetLogCategory. (Jim Posen)
3316a9ebb6 util: Encapsulate logCategories within BCLog::Logger. (Jim Posen)
6a6d764ca5 util: Move debug file management functions into Logger. (Jim Posen)
f55f4fcf05 util: Establish global logger object. (Jim Posen)
Pull request description:
This is purely a refactor with no behavior changes.
This creates a new class `BCLog::Logger` to encapsulate all global logging configuration and state.
Tree-SHA512: b34811f54a53b7375d7b6f84925453c6f2419d21179379ee28b3843d0f4ff8e22020de84a5e783453ea927e9074e32de8ecd05a6fa50d7bb05502001aaed8e53
b386970d07 [moveonly] Extract HelpRequested to dry up the help options testing (Ben Woosley)
Pull request description:
This ensures consistency across interfaces and makes the version handling more clear.
Tree-SHA512: d3f46d34dae6cf98902b0bbb279ada65c3215a25f69e5ff98b88e68f37a6b027ded265d15c12303998e31b390aa30fdb689455c61c983ab4b7527cbce8f4ec61
fae58eca93 tests: Avoid copies of CTransaction (MarcoFalke)
Pull request description:
Avoid the copy (or move) constructor of `CTransaction` in test code, whereever a simple reference can be used instead.
Tree-SHA512: 8ef2077a277d6182996f4671722fdc01a90909ae7431c1e52604aab8ed028910615028caf9b4cb07a9b15fdc04939dea2209cc3189dde7d38271256d9fe1076c
65f3672f3b82a6fa30e5171f85bc8d8a29e0797e wallet: Refactor to use WalletLocation (João Barbosa)
01a4c095c87500650663341533f000c6b613e9da wallet: Add WalletLocation utility class (João Barbosa)
Pull request description:
Advantages of this change:
- avoid resolving wallet absolute path and name repetitively and in multiple places;
- avoid calling `GetWalletDir` in multiple places;
- extract these details from the actual wallet implementation.
The `WalletLocation` class can be a way to represent a wallet not yet loaded that exists in the wallet directory.
Tree-SHA512: 71ec09786e038499710e7acafe92d66ab9883fc894964e267443ae9c10a6872a10995c3987a169c436a4e793dae96b28fb97bd7f78483c4b72ac930fa23f8686
* Fix extra line break in CommitTransaction log message
Introduced in #3680ebe7e80a49 (diff-b2bb174788c7409b671c46ccc86034bdR4113)
* doc: Fix `quorum sign` help
* doc: Add `getdata` to quorum commands list help
* doc: Drop "P2WSH" from signrawtransactionwithkey help
* trivial: Replace "push_back(Pair(..))" with "pushKV"
* trivial: Reorder wallet cmd-line options
* git: Add macos debug simbols to .gitignore
* trivial: Fix typos and whitespaces, drop unused stuff
* Merge #13815: Explicitly ignore the return value of DecodeBase58(...)
579497e77a
* Merge #13815: Default to DEFAULT_BLOCK_MIN_TX_FEE if unable to parse arg
7c5bc2a523
* Merge #13815: Add NODISCARD to all {Decode,Parse}[...](...) functions returning bool.
9cc0230cfc
3d4fa83587 Stop translating command line options (Wladimir J. van der Laan)
Pull request description:
Many options are extremely technical, and refer internals, making it difficult to translate usefully. This came up in discussion of e.g. #10949. If a message is not understood by translators (which are typically end-users, not developers) they'll either translate it literally, making it harder to understand instead of easier, with the added drawback of the user no longer being able to google it.
Also the translation was only working for bitcoin-qt as with the console programs, there is no translation backend. So it was injecting never-used translation messages for bitcoin-cli, -tx.
For these reasons, stop translating options help completely. This should not affect the output **in any way** \* except for bitcoin-qt when a non-English language is configured in the locale.
This implements #10962.
\*) I checked this, but please do verify this.
Tree-SHA512: 46c5f2ac0d4dbe9a6710fab498781e442dd6d6ac17613a99fcfe7a62bf6811fa1c92400d35bd389772cb4b31c6918df261548cbc677addba653f44083b9aeeda
* bls: Only update cached hash in CBLSWrapper when it's really needed
* bls: Reset cached hash in CBLSLazyWrapper instead of re-assigning uint256() to it
* bench: Update expected numbers in bls benchmarks
* bls: Drop UpdateHash methods
Make sure the hash is updated via GetHash() only.
* bench: Add a simple BLS signature aggregation benchmark
* bench: Tweak `BLS_*KeyAggregate_Normal` benchmarks
* bench: Adjust the expected number of iterations for `BLS_*KeyAggregate_Normal` benchmarks
* bench: Add LargeBlock*100 benchmarks, drop LargeBlock*10000 ones
These huge ones are kind of meaningless (results are ~10x slower than 1000) and it's a waste of time. Smaller ones should give an idea if there is a performance drop with the growth of the "block" size.
fa5ed4f8d2 refactor: Avoid locking tx pool cs thrice (MarcoFalke)
Pull request description:
`addUnchecked` is (outside the tests) only called by ATMP, which already takes the tx pool read lock. So locking it twice more in both `addUnchecked` methods seems redundant.
Similarly `CalculateMemPoolAncestors` is (beside once in the wallet) only called in contexts, where the tx pool lock is already taken. So remove the lock there as well.
Tree-SHA512: fcf603b570da0fc529fe6db8add218663eae52845510732bee0d4611263d2429d3d3c9c8ae68493d67287d13504500ed51905ccbe711eb15a0af3b019edad543
* random: Introduce std::shuffle alternative for FastRandomContext
3db746beb4
* random: change std::random_shuffle calls to std::shuffle
https://en.cppreference.com/w/cpp/algorithm/random_shuffle (deprecated in c++14)
* random: change FastRandomContext std::random_shuffle calls to shuffle
* random: change last std::shuffle calls to Shuffle
std::shuffle doesn't accept only two arguments so we use FastRandomContext()
* llmq: use inherited FastRandomContext
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* llmq: use inherited FastRandomContext
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* Make the linter happy :)
Co-authored-by: dustinface <35775977+xdustinface@users.noreply.github.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: dustinface <35775977+xdustinface@users.noreply.github.com>
fa43a4138b bench_bitcoin: Avoid read/write to default datadir (MarcoFalke)
ea80b81e2e test_bitcoin: Avoid read/write to default datadir (MarcoFalke)
Pull request description:
tests should never read or write and potentially corrupt the default datadir, so try to avoid it.
Tree-SHA512: ee446ff4bf59da2aed38c2e4758581d6103e9d4c35a118497e9ec21d566ba33d913e160c2d7ba2ea6f937f000343ecea3816154bd87ee47f64f5b0cf9e88f6e0
* Calculate and store the number of bytes required to spend an input
* Store effective value, fee, and long term fee in CInputCoin
Have CInputCOin store effective value information. This includes the effective
value itself, the fee, and the long term fee for the input
* Implement Branch and Bound coin selection in a new file
Create a new file for coin selection logic and implement the BnB algorithm in it.
* Move output eligibility to a separate function
* Use a struct for output eligibility
Instead of specifying 3 parameters, use a struct for those parameters
in order to reduce the number of arguments to SelectCoinsMinConf.
* Remove coinselection.h -> wallet.h circular dependency
Changes CInputCoin to coinselection and to use CTransactionRef in
order to avoid a circular dependency. Also moves other coin selection
specific variables out of wallet.h to coinselectoin.h
* Add tests for the Branch and Bound algorithm
* Move current coin selection algorithm to coinselection.{cpp,h}
Moves the current coin selection algorithm out of SelectCoinsMinConf
and puts it in coinselection.{cpp,h}. The new function, KnapsackSolver,
instead of taking a vector of COutputs, will take a vector of CInputCoins
that is prepared by SelectCoinsMinConf.
* Move original knapsack solver tests to coinselector_tests.cpp
* Add a GetMinimumFeeRate function which is wrapped by GetMinimumFee
* Have SelectCoinsMinConf and SelectCoins use BnB or Knapsack and use it (partial)
Allows SelectCoinsMinConf and SelectCoins be able to switch between
using BnB or Knapsack for choosing coins.
Has SelectCoinsMinConf do the preprocessing necessary to support either
BnB or Knapsack. This includes calculating the filtering the effective
values for each input.
Uses BnB in CreateTransaction to find an exact match for the output.
If BnB fails, it will fallback to the Knapsack solver.
Dash specific note: just always use Knapsack in CreateTransaction.
* Benchmark BnB in the worst case where it exhausts
* Add a test to make sure that negative effective values are filtered
* More of 12747: Fix typos
Co-authored-by: Andrew Chow <achow101-github@achow101.com>
1bf3f33b46 node: Removed unused wallet-related methods from the Node interface. (Thomas Snider)
b38200459f benchmark: Removed bench/perf.cpp (Thomas Snider)
Pull request description:
Not sure if these should be separate PRs.
First is removal of a platform abstraction for getting cycle counters where possible. Since the benchmarking switch to counting number of iterations over a fixed window instead of counting cycles per iteration, these are unused.
Second is removal of a few methods from the Node interface that seem vestigial from when the concepts of wallet/node were not as clearly separated.
Tree-SHA512: de1460a7d4473ca19db4e2ca845185c63c765d12462c2685044a1f27dedab266cd908bc52235a881a7ad98bc251a4abf4eae523e5f599c169e3511e489f19a0d
5fbf7c4 fix nits: variable naming, typos (Martin Ankerl)
1e0ee90 Use best-fit strategy in Arena, now O(log(n)) instead O(n) (Martin Ankerl)
Pull request description:
This replaces the first-fit algorithm used in the Arena with a best-fit. According to "Dynamic Storage Allocation: A Survey and Critical Review", Wilson et. al. 1995, http://www.scs.stanford.edu/14wi-cs140/sched/readings/wilson.pdf, both startegies work well in practice.
The advantage of using best-fit is that we can switch the O(n) allocation to O(log(n)). Additionally, some previously O(log(n)) operations are now O(1) operations by using hash maps. The end effect is that the benchmark runs about 2.5 times faster on my machine:
# Benchmark, evals, iterations, total, min, max, median
old: BenchLockedPool, 5, 530, 5.25749, 0.00196938, 0.00199755, 0.00198172
new: BenchLockedPool, 5, 1300, 5.11313, 0.000781493, 0.000793314, 0.00078606
I've run all unit tests and benchmarks, and increased the number of iterations so that BenchLockedPool takes about 5 seconds again.
Tree-SHA512: 6551e384671f93f10c60df530a29a1954bd265cc305411f665a8756525e5afe2873a8032c797d00b6e8c07e16d9827465d0b662875433147381474a44119ccce
46340b3337 [bench] Add benchmark for unserialize prevector (Akio Nakamura)
Pull request description:
This PR adds benchmarks for the unserialization of the prevector.
Note: Separated from #12324.
Tree-SHA512: c055a283328cc2634c01eb60f26604a8665939bbf77d367b6ba6b4e01e77d4511fab69cc3ddb1e62969adb3c48752ed870f45ceba153eee192302601341e18a7
* Merge #11517: Tests: Improve benchmark precision
760af84 Removed CCheckQueueSpeed benchmark (Martin Ankerl)
00721e6 Improved microbenchmarking with multiple features. (Martin Ankerl)
Pull request description:
The benchmark's KeepRunning() used to make a function call for each call, inflating measurement times for short running code. This change inlines the critical code that is executed each run and moves the slow timer updates into a new function.
This change increases the average runtime for Trig from 0.000000082339208 sec to 0.000000080948591.
Tree-SHA512: 36b3bc55fc9b1d4cbf526b7103af6af18e9783e6b8f3ad3adbd09fac0bf9401cfefad58fd1e6fa2615d3c4e677998f912f3323d61d7b00b1c660d581c257d577
Signed-off-by: pasta <pasta@dashboost.org>
# Conflicts:
# src/bench/bench.cpp
# src/bench/bench_dash.cpp
# src/bench/crypto_hash.cpp
# src/bench/prevector_destructor.cpp
# src/bench/verify_script.cpp
* More of 11517
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
1fc605a8ae fix bench/prevector.cpp (Akio Nakamura)
Pull request description:
This patch intends to fix some incorrect action of bench/prevector.cpp.
1. PrevectorClear()
2nd call of ```clear()``` should to operate t1 instead of t0.
This patch changes t0 to t1.
2. PREVECTOR_TEST()
PREVECTOR_TEST macro should to call both
```PrevectorXX<nontrivial_t>(state)``` and ```PrevectorXX<trivial_t>(state)```
by specific ```"name"``` which given by parameter instead of calling
```PrevectorResize<>()``` regardless of ```"name"```.
This patch changes ```"PrevectorResize<"``` of this macro to
```"Prevector ## name<"```.
Tree-SHA512: d0498c6d627d7e96fc8ccfb329ca0be2641535b1ce1923d9b1fc720825f9bf4d7281dc8d5ae929038e37b3e625189af9807cb62e6d20933d73832a6dff4b5596
e56771365b Do not use uppercase characters in source code filenames (practicalswift)
419a1983ca docs: Add a note about the source code filename naming convention (practicalswift)
Pull request description:
Add a note about the source code filename naming convention.
Tree-SHA512: 8d329bd9e19bcd26e74b0862fb0bc2369b46095dbd3e69d34859908632763abd7c3d00ccc44ee059772ad4bae4460c2bcc1c0e22fd9d8876d57e5fcd346cea4b
34328b4 Use PACKAGE_NAME instead of hardcoding application name in log message (Wladimir J. van der Laan)
0c74e2e Log debug build status and warn when running benchmarks (Wladimir J. van der Laan)
Pull request description:
Log whether the starting instance of bitcoin core is a debug or release build (--enable-debug).
Also warn when running the benchmarks with a debug build, to prevent mistakes comparing debug to non-debug results.
Tree-SHA512: f612dcb7d0a8435016cff0df8aef4942144dfb88be8a00df45cc8830d2aba4b167f6d397b83f8f57d57685888babd04ba88d4dac5a202d3dbd91bcbea3708ef0
254c85b68794ada713dbdae415db72adf5fcbaf3 bench: Benchmark GCS filter creation and matching. (Jim Posen)
f33b717a85363e067316c133a542559d2f4aaeca blockfilter: Optimization on compilers with int128 support. (Jim Posen)
97b64d67daf0336dfb64b132f3e4d6a4c1967da4 blockfilter: Unit test against BIP 158 test vectors. (Jim Posen)
a4afb9cadbaecb0676e6475ab8d32a52faecb47a blockfilter: Additional helper methods to compute hash and header. (Jim Posen)
cd09c7925b5af4104834971cfe072251e3ac2bda blockfilter: Serialization methods on BlockFilter. (Jim Posen)
c1855f6052aca806fdb51be01b30dfeee8b55f40 blockfilter: Construction of basic block filters. (Jim Posen)
53e7874e079f9ddfe8b176f11d46e6b59c7283d5 blockfilter: Simple test for GCSFilter construction and Match. (Jim Posen)
558c536e35a25594881693e6ff01d275c88d7af1 blockfilter: Implement GCSFilter Match methods. (Jim Posen)
cf70b550054eed36f194eaa13f4a9cb31e32df38 blockfilter: Implement GCSFilter constructors. (Jim Posen)
c454f0ac63c6028f54c7eb51683b3ccdb475b19b blockfilter: Declare GCSFilter class for BIP 158 impl. (Jim Posen)
9b622dc72279b027c59d6541cddff53800fc689b streams: Unit tests for BitStreamReader and BitStreamWriter. (Jim Posen)
fe943f99bf0a2bbb12e30bc4803c0337e3c95b93 streams: Implement BitStreamReader/Writer classes. (Jim Posen)
87f2d9ee43a9220076b1959d1ca65245d9591be9 streams: Unit test for VectorReader class. (Jim Posen)
947133dec92cd25ec2b3358c09b8614ba6fb40d4 streams: Create VectorReader stream interface for vectors. (Jim Posen)
Pull request description:
This implements the compact block filter construction in [BIP 158](https://github.com/bitcoin/bips/blob/master/bip-0158.mediawiki). The code is not used anywhere in the Bitcoin Core code base yet. The next step towards [BIP 157](https://github.com/bitcoin/bips/blob/master/bip-0157.mediawiki) support would be to create an indexing module similar to `TxIndex` that constructs the basic and extended filters for each validated block.
### Filter Sizes
[Here](https://gateway.ipfs.io/ipfs/QmRqaAAQZ5ZX5eqxP7J2R1MzFrc2WDdKSWJEKtQzyawqog) is a CSV of filter sizes for blocks in the main chain.
As you can see below, the ratio of filter size to block size drops after the first ~150,000 blocks:
The reason for the relatively large filter sizes is that Golomb-coded sets only achieve good compression with a sufficient number of elements. Empirically, the average element size with 100 elements is 14% larger than with 10,000 elements.
The ratio of filter size to block size is computed without witness data for basic filters. Here is a summary table of filter size ratios *for blocks after height 150,000*:
| Stat | Filter Type |
|-------|--------------|
| Weighted Size Ratio Mean | 0.0198 |
| Size Ratio Mean | 0.0224 |
| Size Ratio Std Deviation | 0.0202 |
| Mean Element Size (bits) | 21.145 |
| Approx Theoretical Min Element Size (bits) | 21.025 |
Tree-SHA512: 2d045fbfc3fc45490ecb9b08d2f7e4dbbe7cd8c1c939f06bbdb8e8aacfe4c495cdb67c820e52520baebbf8a8305a0efd8e59d3fa8e367574a4b830509a39223f
be8ab7d08 Create new wallet databases as directories rather than files (Russell Yanofsky)
26c06f24e Allow wallet files not in -walletdir directory (Russell Yanofsky)
d8a99f65e Allow wallet files in multiple directories (Russell Yanofsky)
Pull request description:
This change consists of three commits:
* The first commit is a pure refactoring that removes the restriction that two wallets can only be opened at the same time if they are contained in the same directory.
* The second commit removes the restriction that `-wallet` filenames can only refer to files in the `-walletdir` directory.
* The third commit makes second commit a little safer by changing bitcoin to create wallet databases as directories rather than files, so they can be safely backed up.
All three commits should be straightforward:
* The first commit adds around 20 lines of new code and then updates a bunch of function signatures (generally updating them to take plain fs::path parameters, instead of combinations of strings, fs::paths, and objects like CDBEnv and CWalletDBWrapper).
* The second commit removes two `-wallet` filename checks and adds some test cases to the multiwallet unit test.
* The third commit just changes the mapping from specified wallet paths to bdb environment & data paths.
---
**Note:** For anybody looking at this PR for the first time, I think you can skip the comments before _20 Nov_ and start reading at https://github.com/bitcoin/bitcoin/pull/11687#issuecomment-345625565. Comments before _20 Nov_ were about an earlier version of the PR that didn't include the third commit, and then confusion from not seeing the first commit.
Tree-SHA512: 00bbb120fe0df847cf57014f75f1f7f1f58b0b62fa0b3adab4560163ebdfe06ccdfff33b4231693f03c5dc23601cb41954a07bcea9a4919c8d42f7d62bcf6024
fa013664ae23d0682a195b9bded85bc19c99536e util: Add type safe GetTime (MarcoFalke)
Pull request description:
There are basically two ways to get the time in Bitcoin Core:
* get the system time (via `GetSystemTimeInSeconds` or `GetTime{Millis,Micros}`)
* get the mockable time (via `GetTime`)
Both return the same type (a plain int). This can lead to (test-only) bugs such as 99464bc38e.
Fix that by deprecating `GetTime` and adding a `GetTime<>` that returns the mockable time in a non-int type. The new util function is currently unused, but new code should it where possible.
ACKs for commit fa0136:
promag:
utACK fa013664.
Tree-SHA512: efab9c463f079fd8fd3030c479637c7b1e8be567a881234bd0f555c8f87e518e3b43ef2466128103db8fc40295aaf24e87ad76d91f338c631246fc703477e95c
* scripted-diff: Replace #include "" with #include <> (ryanofsky)
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* scripted-diff: Replace #include "" with #include <> (Dash Specific)
-BEGIN VERIFY SCRIPT-
for f in \
src/bls/*.cpp \
src/bls/*.h \
src/evo/*.cpp \
src/evo/*.h \
src/governance/*.cpp \
src/governance/*.h \
src/llmq/*.cpp \
src/llmq/*.h \
src/masternode/*.cpp \
src/masternode/*.h \
src/privatesend/*.cpp \
src/privatesend/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* build: Remove -I for everything but project root
Remove -I from build system for everything but the project root,
and built-in dependencies.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/Makefile.test.include
* qt: refactor: Use absolute include paths in .ui files
* qt: refactor: Changes to make include paths absolute
This makes all include paths in the GUI absolute.
Many changes are involved as every single source file in
src/qt/ assumes to be able to use relative includes.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/qt/dash.cpp
# src/qt/optionsmodel.cpp
# src/qt/test/rpcnestedtests.cpp
* test: refactor: Use absolute include paths for test data files
* Recommend #include<> syntax in developer notes
* refactor: Include obj/build.h instead of build.h
* END BACKPORT #11651 Remove trailing whitespace causing travis failure
* fix backport 11651
Signed-off-by: Pasta <pasta@dashboost.org>
* More of 11651
* fix blockchain.cpp
Signed-off-by: pasta <pasta@dashboost.org>
* Add missing "qt/" in includes
* Add missing "test/" in includes
* Fix trailing whitespaces
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: MeshCollider <dobsonsa68@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
fbf327b Minimal code changes to allow msvc compilation. (Aaron Clauson)
Pull request description:
These changes are required to allow the Bitcoin source to build with Microsoft's C++ compiler (#11562 is also required).
I looked around for a better place for the typedef of ssize_t which is in random.h. The best candidate looks like src/compat.h but I figured including that header in random.h is a bigger change than the typedef. Note that the same typedef is in at least two other places including the OpenSSL and Berkeley DB headers so some of the Bitcoin code already picks it up.
Tree-SHA512: aa6cc6283015e08ab074641f9abdc116c4dc58574dc90f75e7a5af4cc82946d3052370e5cbe855fb6180c00f8dc66997d3724ff0412e4b7417e51b6602154825
069215e Initialize recently introduced non-static class member lastCycles to zero in constructor (practicalswift)
Pull request description:
Initialize recently introduced non-static class member `lastCycles` to zero in constructor.
`lastCycles` was introduced in 3532818746 which was merged into master yesterday.
Friendly ping @laanwj :-)
Tree-SHA512: cb93b6a8f6e2e3b06cd05a635da95c84f3df64c21fc23fe82f98306ea571badc32040315b563e46ddb5203128226bc334269acd497beead5a5777c434060fd85
620bae3 Require a steady clock for bench with at least micro precision (Matt Corallo)
Pull request description:
Using a non-steady high_precision_clock by default is definitely not what we want, and in practice steady_clock has more than enough precision. Should double-check that travis passes on this one to make sure we actually have at least microsecond precision on all platforms.
Tree-SHA512: 54a4af3b6addca9897e8ab04694f9461343691b475ca3ed2368595c37520612e284969be94a8ee3d7c66d16532f7bb16b6ad80284cbc153653e8ef2d56696e9d
24a0bdd bench: prefer a steady clock if the resolution is no worse (Cory Fields)
c515d26 bench: switch to std::chrono for time measurements (Cory Fields)
Pull request description:
gettimeofday has portability issues, see for example #11558.
Regardless of large-scale clock refactors in the future, I think it's fine for bench to just use std::chrono itself.
Note that this may slightly improve bench accuracy and changes the display from tiny floats to nanosecond counts instead.
Tree-SHA512: 122355456d01ec6cfcf6867991715cf3a95eabbf5a4f2adc26a059b50382ffb318b7639cdd575197fc4ee5be8b967c0404f1f920d6f5bd4ddd0bd63b5e5c5632
1789e4675 Force explicit double -> int conversion for CFeeRate constructor (Matt Corallo)
53a6590f4 Make float <-> int casts explicit outside of test, qt, CFeeRate (Matt Corallo)
0b1b9148c Remove countMaskInv caching in bench framework (Matt Corallo)
Pull request description:
This fixes an issue where estimatesmartfee which matches at the min relay fee will return 999 sat/byte instead of 1000 sat/byte due to a float rounding issue. I went ahead and made all float <-> int conversion outside of test/qt explicit (test only had one or two more, Qt had quite a few, including many in the Qt headers themselves) and added overloads to CFeeRate to force callers to do an explicit round themselves. Easy to test with -Wfloat-conversion.
Tree-SHA512: 66087b08e5dfca67506da54ae057c2f9d86184415e8fa4fa0199e38839e06a3ce96c836fcb7593b7d960065f5240c594ff3a0cfa14333ac528421f5aeac835c9
64fb0ac Declare single-argument (non-converting) constructors "explicit" (practicalswift)
Pull request description:
Declare single-argument (non-converting) constructors `explicit`.
In order to avoid unintended implicit conversions.
For a more thorough discussion, see ["C.46: By default, declare single-argument constructors explicit"](http://isocpp.github.io/CppCoreGuidelines/CppCoreGuidelines#c46-by-default-declare-single-argument-constructors-explicit) in the C++ Core Guidelines (Stroustrup & Sutter).
Tree-SHA512: e0c6922e56b11fa402621a38656d8b1122d16dd8f160e78626385373cf184ac7f26cb4c1851eca47e9b0dbd5e924e39a85c3cbdcb627a05ee3a655ecf5f7a0f1
592404f03 Changing &vec[0] to vec.data(), what 9804 missed (MeshCollider)
Pull request description:
This just continues the work of https://github.com/bitcoin/bitcoin/pull/9804
Modifies a lot of `&vector[]`'s to `vector.data()`'s across all the files including tests, just the stuff that 9804 missed
Tree-SHA512: dd1a9dffb999dea4fba78dcc91fe02f90250db86f5c74948e1ff3e8b4036b2154b600555eaa04dece5368920aae3513bc36425dc96e4319ca1041b0928a6b656
* Implement assign_to in prevector
* Implement optimized fill() methods for trivially constructible types in prevector
No need to invoke the "new" operator on every element when the elements
are trivially constructible (e.g. unsigned char)
* Benchmark prevector<...>::const_iterator vs vector.assign()
* Manually invoke ::memmove instead of relying on the stl
Some compilers do not automatically switch to memmove internally, so lets
do this manually.
* Use prevector::assign_to in benchmark
* Rename prevector benchmarks
* Use larger copy ranges in benchmarks
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
36d326e8b Use nullptr instead of zero (0) as the null pointer constant (practicalswift)
Pull request description:
Use `nullptr` instead of zero (0) as the null pointer constant.
The road towards `nullptr` (C++11) is split into two PRs:
* `NULL` → `nullptr` is handled in PR #10483 (scripted)
* `0` → `nullptr` is handled in PR #10645 (manual, this PR)
By using the C++11 keyword `nullptr` we are guaranteed a prvalue of type `std::nullptr_t`.
For a more thorough discussion, see "A name for the null pointer: nullptr" (Sutter &
Stroustrup), http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2431.pdf
Tree-SHA512: 5412404b40a94ea2d9fc8f81573559c4ffe559749301d486b09d41a7a736345ad602d08ac590930bb00a49692b6075520cf3d543e4da6ccd5b29fa9bcc3f15ea
5aad635 Use memset() to optimize prevector::resize() (Evan Klitzke)
e46be25 Reduce redundant code of prevector and speed it up (Akio Nakamura)
f0e7aa7 Add new prevector benchmarks. (Evan Klitzke)
Pull request description:
This branch optimizes various `prevector` operations, especially resizing vectors. While profiling the `loadblk` thread I noticed that a lot of time was being spent in `prevector::resize()` which led to this work. I have some data here indicating that it takes up **37%** of the time in `ReadBlockFromDisk()`: https://monad.io/readblockfromdisk.svg
This branch improves things significantly. For trivial types, the new results for the prevector benchmark are:
* `PrevectorClearTrivial` which tests `prevector::clear()` becomes 24.6x faster
* `PrevectorDestructorTrivial` which tests `prevector::~prevector()` becomes 20.5x faster
* `PrevectorResizeTrivial` which tests `prevector::resize()` becomes 20.3x faster
Note that in practice it looks like the prevector is only used to contain `unsigned char` types, which is a trivial type. The benchmarks are testing a bit of an extreme case, but the changes here are motivated by the profiling data for `ReadBlockFromDisk()` I linked to above.
The pull request here consists of a series of three commits:
* The first adds new benchmarks but does not change the prevector code.
* The second is from @AkioNak , and merges some prevector optimizations he submitted in #11988
* The third optimizes `prevector::resize()` to use `memset()` when the prevector contains trivially constructible types
Tree-SHA512: 28f7cbb91a19f9f43b6a5942781d7eb2e3197389186b666f086b69df12bee37773140f765426d715bfb8ebff79cb27a5f1206d0325b54b4aa65598b50fb18368
4defdfab94504018f822dc34a313ad26cedc8255 [MOVEONLY] Move unused Merkle branch code to tests (Pieter Wuille)
4437d6e1f3107a20a8c7b66be8b4b972a82e3b28 8-way AVX2 implementation for double SHA256 on 64-byte inputs (Pieter Wuille)
230294bf5fdeba7213471cd0b795fb7aa36e5717 4-way SSE4.1 implementation for double SHA256 on 64-byte inputs (Pieter Wuille)
1f0e7ca09c9d7c5787c218156fa5096a1bdf2ea8 Use SHA256D64 in Merkle root computation (Pieter Wuille)
d0c96328833127284574bfef26f96aa2e4afc91a Specialized double sha256 for 64 byte inputs (Pieter Wuille)
57f34630fb6c3e218bd19535ac607008cb894173 Refactor SHA256 code (Pieter Wuille)
0df017889b4f61860092e1d54e271092cce55f62 Benchmark Merkle root computation (Pieter Wuille)
Pull request description:
This introduces a framework for specialized double-SHA256 with 64 byte inputs. 4 different implementations are provided:
* Generic C++ (reusing the normal SHA256 code)
* Specialized C++ for 64-byte inputs, but no special instructions
* 4-way using SSE4.1 intrinsics
* 8-way using AVX2 intrinsics
On my own system (AVX2 capable), I get these benchmarks for computing the Merkle root of 9001 leaves (supported lengths / special instructions / parallellism):
* 7.2 ms with varsize/naive/1way (master, non-SSE4 hardware)
* 5.8 ms with size64/naive/1way (this PR, non-SSE4 capable systems)
* 4.8 ms with varsize/SSE4/1way (master, SSE4 hardware)
* 2.9 ms with size64/SSE4/4way (this PR, SSE4 hardware)
* 1.1 ms with size64/AVX2/8way (this PR, AVX2 hardware)
Tree-SHA512: efa32d48b32820d9ce788ead4eb583949265be8c2e5f538c94bc914e92d131a57f8c1ee26c6f998e81fb0e30675d4e2eddc3360bcf632676249036018cff343e
fd05132e5 Restore default format state of cout after printing with std::fixed/setprecision (practicalswift)
Pull request description:
Restore default format state of `std::cout` after printing with `std::fixed`/`std::setprecision`.
Tree-SHA512: 445b5b42aff58e2350939e8febc9b4a6fff478616abfe831aec42bee906cefac7a153c93d506407fb213d04dae9c7afbb5bfd344be63ca0f40ae39b331a4144f
bb326add9f38f2a8e5ce5ee29d98ce08038200d8 Add ChaCha20Poly1305@Bitcoin AEAD benchmark (Jonas Schnelli)
99aea045d688059caf89c0e485fa427bd28eddd8 Add ChaCha20Poly1305@Bitcoin tests (Jonas Schnelli)
af5d1b5f4a7b56628a76af21284c258d845894f0 Add ChaCha20Poly1305@Bitcoin AEAD implementation (Jonas Schnelli)
Pull request description:
This adds a new AEAD (authenticated encryption with additional data) construct optimised for small messages (like used in Bitcoins p2p network).
Includes: #15519, #15512 (please review those first).
The construct is specified here.
https://gist.github.com/jonasschnelli/c530ea8421b8d0e80c51486325587c52#ChaCha20Poly1305Bitcoin_Cipher_Suite
This aims for being used in v2 peer-to-peer messages.
ACKs for top commit:
laanwj:
code review ACK bb326add9f38f2a8e5ce5ee29d98ce08038200d8
Tree-SHA512: 15bcb86c510fce7abb7a73536ff2ae89893b24646bf108c6cf18f064d672dbbbea8b1dd0868849fdac0c6854e498f1345d01dab56d1c92031afd728302234686
Add new line
e9d5e975612e828ec44f9247b4c5c08f0268d360 Poly1305: tolerate the intentional unsigned wraparound in poly1305.cpp (Jonas Schnelli)
b34bf302f26c7cede47cc20b3bdfb613c51ab67e Add Poly1305 bench (Jonas Schnelli)
03be7f48fad10aa8da3291c28a185ed750193c7b Add Poly1305 implementation (Jonas Schnelli)
Pull request description:
This adds a currently unused Poly1305 implementation including test vectors from RFC7539.
Required for BIP151 (and related to #15512).
Tree-SHA512: f8c1ad2f686b980a7498ca50c517e2348ac7b1fe550565156f6c2b20faf764978e4fa6b5b1c3777a16e7a12e2eca3fb57a59be9c788b00d4358ee80f2959edb1
2dfe27517 Add ChaCha20 bench (Jonas Schnelli)
2bc2b8b49 Add ChaCha20 encryption option (XOR) (Jonas Schnelli)
Pull request description:
The current ChaCha20 implementation does not support message encryption (it can only output the keystream which is sufficient for the RNG).
This PR adds the actual XORing of the `plaintext` with the `keystream` in order to return the desired `ciphertext`.
Required for v2 message transport protocol.
ACKs for commit 2dfe27:
jnewbery:
Looks good. utACK 2dfe2751713c814aea53b5a7563eb74ad1baea00.
jnewbery:
utACK 2dfe2751713c814aea53b5a7563eb74ad1baea00
sipa:
utACK 2dfe2751713c814aea53b5a7563eb74ad1baea00
ryanofsky:
utACK 2dfe2751713c814aea53b5a7563eb74ad1baea00. Changes since last review are just renaming the Crypt method, adding comments, and simplifying the benchmark.
Tree-SHA512: 84bb234da2ca9fdc44bc29a786d9dd215520f81245270c1aef801ef66b6091b7793e2eb38ad6dbb084925245065c5dce9e5582f2d0fa220ab3e182d43412d5b5
6835cb0ab Avoid static analyzer warnings regarding uninitialized arguments (practicalswift)
Pull request description:
Avoid static analyzer warnings regarding _"Function call argument is a pointer to uninitialized value"_ in cases where we are intentionally using such arguments.
This is achieved by using `f(b.begin(), b.end())` (`std::array<char, N>`) instead of `f(b, b + N)` (`char b[N]`).
Rationale:
* Reduce false positives by guiding static analyzers regarding our intentions.
Before this commit:
```shell
$ clang-tidy-3.5 -checks=* src/bench/base58.cpp
bench/base58.cpp:23:9: warning: Function call argument is a pointer to uninitialized value [clang-analyzer-core.CallAndMessage]
EncodeBase58(b, b + 32);
^
$ clang-tidy-3.5 -checks=* src/bench/verify_script.cpp
bench/verify_script.cpp:59:5: warning: Function call argument is a pointer to uninitialized value [clang-analyzer-core.CallAndMessage]
key.Set(vchKey, vchKey + 32, false);
^
$
```
After this commit:
```shell
$ clang-tidy-3.5 -checks=* src/bench/base58.cpp
$ clang-tidy-3.5 -checks=* src/bench/verify_script.cpp
$
```
Tree-SHA512: 5814a320ca8b959d0954bb64393424bcad73f942d2e988de1cd6788f39153b93900325532f2e340de02d740a3953385d212ae08e7ec72bb4c394a40475f251df
c1082a7 Chainparams: Use the factory for pow tests (Jorge Timón)
2351a06 Chainparams: Get rid of CChainParams& Params(std::string) (Jorge Timón)
f87f362 Chainparams: Use a regular factory for creating chainparams (Jorge Timón)
Tree-SHA512: 359c8a2a1bc9d02db7856d02810240ada28048ac088f878b575597a7255cdb0ffdd1a647085ee67a34c6a7e7ed9e6cfdb61240cf6e75139619b640dbb096072c
c37e32a [Wallet] Prevent CInputCoin to be in a null state (NicolasDorier)
f597dcb [Wallet] Simplify code using CInputCoin (NicolasDorier)
e78bc45 [Wallet] Decouple CInputCoin from CWalletTx (NicolasDorier)
fd44ac1 [Wallet] Rename std::pair<const CWalletTx*, unsigned int> to CInputCoin (NicolasDorier)
Tree-SHA512: d24361fc514a0566bce1c3953d766dfe4fece79c549cb4db2600695a4ce08e85caa61b7717812618e523a2f2a1669877dad2752ed079e2ed2d27249f9bc8590e
fix error, based on 1 0 1 6 5
fix error, based on 1 0 1 6 5
218d915 [bench] Avoid function call arguments which are pointers to uninitialized values (practicalswift)
Tree-SHA512: 68d62e9442094f171433291b7f13dba20fc7ead5fd7f2292e1eb97ae51aa2345d40224c4a65c2e5d3552802b3cd0f675a82b6181cf5b77e964355650b25089f0
45a5aaf Only call clear on prevector if it isn't trivially destructible and don't loop in clear (Jeremy Rubin)
aaa02e7 Add prevector destructor benchmark (Jeremy Rubin)
Tree-SHA512: 52bc8163b65b71310252f2d578349d0ddc364a6c23795c5e06e101f5449f04c96cbdca41c0cffb1974b984b8e33006471137d92b8dd4a81a98e922610a94132a
dcf2112 Add safe flag to listunspent result (NicolasDorier)
af61d9f Add COutput::fSafe member for safe handling of unconfirmed outputs (Russell Yanofsky)
Tree-SHA512: 311edb6fa8075b3ede5b24cb8c6e5d133ccd8ac9ecafea07b604ffa812ee4f071337e31695e662d8573590a0460af20aaaeb39d49c9ea87924449ea50bdfb0b3
* Add libbacktrace to depends
This is currently only useful to extract symbols. It fails to gather
stacktraces when compiled with MinGW, so we can only use it to get symbol
information from a stack trace which we gathered outside of libbacktrace.
* Add -mbig-obj to CXXFLAGS for MinGW builds
* Implement stacktraces for C++ exceptions
This is a hack and should only be used for debugging. It works by wrapping
the C++ ABI __wrap___cxa_allocate_exception. The wrapper records a backtrace
and stores it in a global map. Later the stacktrace can be retrieved with
GetExceptionStacktraceStr.
This commit also adds handlers to pretty print uncaught exceptions and
signals.
* Use GetPrettyExceptionStr for all unhandled exceptions
* Use --enable-stacktraces in CI for linux32/linux64
* Register exception translators to pretty print exceptions in unit tests
* Catch and print python exceptions when stopping nodes
Otherwise the code at the bottom is never executed when nodes crash,
leading to no output of debug.log files on Travis.
* Remove now unneeded/unused TestCrash methods
db07f91 Assert that what might look like a possible division by zero is actually unreachable (practicalswift)
Tree-SHA512: f1652eb37196a5b72f356503a1fbb44fb98aa8a94954ad1765f86d81ebf41a2337d4eb58c4f19937fda3752f5d2d642756e44afdbd438015b87ac20801246bff
ad1ae7a Check and enable -Wshadow by default. (Pavel Janík)
9de90bb Do not shadow variables (gcc set) (Pavel Janík)
Tree-SHA512: 9517feb423dc8ddd63896016b25324673bfbe0bffa97f22996f59d7a3fcbdc2ebf2e43ac02bc067546f54e293e9b2f2514be145f867321e9031f895c063d9fb8
https://github.com/dashpay/dash/pull/2409 removed the need to call the
Init method of the Chia BLS library, but we also accidently removed the
initialization of the secure allocator.
* Use Dash block for DeserializeAndCheckBlockTest
Replaced Bitcoin block with the largest Dash block I could find on mainnet.
* Store hashDevnetGenesisBlock in Consensus::Params
Remove the need for chainparams to be available when the devnetGenesis hash
is needed. Fixes a crash in CheckBlockHeader() when called from benchmarking
code, which does not initialize the Params() function.
cee1612 reduce number of lookups in TransactionWithinChainLimit (Gregory Sanders)
af9bedb Test for fix of txn chaining in wallet (Gregory Sanders)
5882c09 CreateTransaction: Don't return success with too-many-ancestor txn (Gregory Sanders)
0b2294a SelectCoinsMinConf: Prefer coins with fewer ancestors (Gregory Sanders)
81e3228 Make CTransaction actually immutable (Pieter Wuille)
42fd8de Make DecodeHexTx return a CMutableTransaction (Pieter Wuille)
c3f5673 Make CWalletTx store a CTransactionRef instead of inheriting (Pieter Wuille)
a188353 Switch GetTransaction to returning a CTransactionRef (Pieter Wuille)
e2b3fb3 Optimize vInOutPoints insertion a bit (Matt Corallo)
eecffe5 Remove redundant duplicate-input check from CheckTransaction (Matt Corallo)
b2e178a Add deserialize + CheckBlock benchmarks, and a full block hex (Matt Corallo)
444c673 bench: Add benchmark for lockedpool allocation/deallocation (Wladimir J. van der Laan)
6567999 rpc: Add `getmemoryinfo` call (Wladimir J. van der Laan)
4536148 support: Add LockedPool (Wladimir J. van der Laan)
f4d1fc2 wallet: Get rid of LockObject and UnlockObject calls in key.h (Wladimir J. van der Laan)
999e4c9 wallet: Change CCrypter to use vectors with secure allocator (Wladimir J. van der Laan)
* Remove orphan state wipe from UnloadBlockIndex.
As orphan state is now "network state", like in
d6ea737be1,
UnloadBlockIndex is only used during init if we end up reindexing
to clear our block state so that we can start over. However, at
that time no connections have been brought up as CConnman hasn't
been started yet, so all of the network processing state logic is
empty when its called.
* Move network-msg-processing code out of main to its own file
* Rename the remaining main.{h,cpp} to validation.{h,cpp}
Avoid calling gettimeofday every time through the benchmarking loop, by keeping
track of how long each loop takes and doubling the number of iterations done
between time checks when they take less than 1/16'th of the total elapsed time.
Benchmarking framework, loosely based on google's micro-benchmarking
library (https://github.com/google/benchmark)
Wny not use the Google Benchmark framework? Because adding Even More Dependencies
isn't worth it. If we get a dozen or three benchmarks and need nanosecond-accurate
timings of threaded code then switching to the full-blown Google Benchmark library
should be considered.
The benchmark framework is hard-coded to run each benchmark for one wall-clock second,
and then spits out .csv-format timing information to stdout. It is left as an
exercise for later (or maybe never) to add command-line arguments to specify which
benchmark(s) to run, how long to run them for, how to format results, etc etc etc.
Again, see the Google Benchmark framework for where that might end up.
See src/bench/MilliSleep.cpp for a sanity-test benchmark that just benchmarks
'sleep 100 milliseconds.'
To compile and run benchmarks:
cd src; make bench
Sample output:
Benchmark,count,min,max,average
Sleep100ms,10,0.101854,0.105059,0.103881
