dash/test
MarcoFalke 077f21875f
Merge #14179: qa: Fixups to "Run all tests even if wallet is not compiled"
fa8433e379 qa: Remove unneded import_deterministic_coinbase_privkeys overwrite, add comments (MarcoFalke)
e413c2ddd1 qa: Fix codespell error and have lint-spelling error instead of warn (MarcoFalke)

Pull request description:

  Currently the functional tests require the wallet module to be compiled into the Bitcoin Core executable. For example the premine (or datadir cache) to speed up tests when run in parallel would mine a bunch of blocks and store the private keys to sign the coinbase tx outputs in a wallet. There is no need to have the overhead of the whole wallet module by using keys that are deterministic for all runs.

  Note that this change most likely requires the `./test/cache/` to be cleared.

Tree-SHA512: 9ce26036b0e10f0f888f66a1e50be6a357343f9ffb302ae24a7bb3df2f083a31702ef308b738a03b08a1b623aeddac5d6563dc1b15078c0357b7dafad7808ec3
2021-07-21 15:53:38 -05:00
..
functional Merge #14179: qa: Fixups to "Run all tests even if wallet is not compiled" 2021-07-21 15:53:38 -05:00
lint Merge #16618: [Fix] Allow connection of a noban banned peer 2021-07-19 19:00:04 -05:00
util Merge #13666: Always create signatures with Low R values 2021-07-06 20:29:32 +03:00
config.ini.in Merge #13024: test: Add rpcauth pair that generated by rpcauth.py 2020-07-22 12:12:46 -05:00
README.md Merge #14526: docs: Document lint tests 2021-07-17 14:25:42 -05:00

This directory contains integration tests that test dashd and its utilities in their entirety. It does not contain unit tests, which can be found in /src/test, /src/wallet/test, etc.

This directory contains the following sets of tests:

  • functional which test the functionality of dashd and dash-qt by interacting with them through the RPC and P2P interfaces.
  • util which tests the dash utilities, currently only dash-tx.
  • lint which perform various static analysis checks.

The util tests are run as part of make check target. The functional tests and lint scripts are run by the travis continuous build process whenever a pull request is opened. All sets of tests can also be run locally.

Running tests locally

Before tests can be run locally, Dash Core must be built. See the building instructions for help.

Functional tests

Dependencies

Many Dash specific tests require dash_hash. To install it:

  • Clone the repo git clone https://github.com/dashpay/dash_hash
  • Install dash_hash cd dash_hash && python3 setup.py install

The ZMQ functional test requires a python ZMQ library. To install it:

  • on Unix, run sudo apt-get install python3-zmq
  • on mac OS, run pip3 install pyzmq

Running the tests

Individual tests can be run by directly calling the test script, e.g.:

test/functional/wallet_hd.py

or can be run through the test_runner harness, eg:

test/functional/test_runner.py wallet_hd.py

You can run any combination (incl. duplicates) of tests by calling:

test/functional/test_runner.py <testname1> <testname2> <testname3> ...

Wildcard test names can be passed, if the paths are coherent and the test runner is called from a bash shell or similar that does the globbing. For example, to run all the wallet tests:

test/functional/test_runner.py test/functional/wallet*
functional/test_runner.py functional/wallet* (called from the test/ directory)
test_runner.py wallet* (called from the test/functional/ directory)

but not

test/functional/test_runner.py wallet*

Combinations of wildcards can be passed:

test/functional/test_runner.py ./test/functional/tool* test/functional/mempool*
test_runner.py tool* mempool*

Run the regression test suite with:

test/functional/test_runner.py

Run all possible tests with

test/functional/test_runner.py --extended

By default, up to 4 tests will be run in parallel by test_runner. To specify how many jobs to run, append --jobs=n

The individual tests and the test_runner harness have many command-line options. Run test_runner.py -h to see them all.

Troubleshooting and debugging test failures

Resource contention

The P2P and RPC ports used by the dashd nodes-under-test are chosen to make conflicts with other processes unlikely. However, if there is another dashd process running on the system (perhaps from a previous test which hasn't successfully killed all its dashd nodes), then there may be a port conflict which will cause the test to fail. It is recommended that you run the tests on a system where no other dashd processes are running.

On linux, the test_framework will warn if there is another dashd process running when the tests are started.

If there are zombie dashd processes after test failure, you can kill them by running the following commands. Note that these commands will kill all dashd processes running on the system, so should not be used if any non-test dashd processes are being run.

killall dashd

or

pkill -9 dashd
Data directory cache

A pre-mined blockchain with 200 blocks is generated the first time a functional test is run and is stored in test/cache. This speeds up test startup times since new blockchains don't need to be generated for each test. However, the cache may get into a bad state, in which case tests will fail. If this happens, remove the cache directory (and make sure dashd processes are stopped as above):

rm -rf cache
killall dashd
Test logging

The tests contain logging at different levels (debug, info, warning, etc). By default:

  • when run through the test_runner harness, all logs are written to test_framework.log and no logs are output to the console.
  • when run directly, all logs are written to test_framework.log and INFO level and above are output to the console.
  • when run on Travis, no logs are output to the console. However, if a test fails, the test_framework.log and dashd debug.logs will all be dumped to the console to help troubleshooting.

To change the level of logs output to the console, use the -l command line argument.

test_framework.log and dashd debug.logs can be combined into a single aggregate log by running the combine_logs.py script. The output can be plain text, colorized text or html. For example:

combine_logs.py -c <test data directory> | less -r

will pipe the colorized logs from the test into less.

Use --tracerpc to trace out all the RPC calls and responses to the console. For some tests (eg any that use submitblock to submit a full block over RPC), this can result in a lot of screen output.

By default, the test data directory will be deleted after a successful run. Use --nocleanup to leave the test data directory intact. The test data directory is never deleted after a failed test.

Attaching a debugger

A python debugger can be attached to tests at any point. Just add the line:

import pdb; pdb.set_trace()

anywhere in the test. You will then be able to inspect variables, as well as call methods that interact with the dashd nodes-under-test.

If further introspection of the dashd instances themselves becomes necessary, this can be accomplished by first setting a pdb breakpoint at an appropriate location, running the test to that point, then using gdb to attach to the process and debug.

For instance, to attach to self.node[1] during a run:

2017-06-27 14:13:56.686000 TestFramework (INFO): Initializing test directory /tmp/user/1000/testo9vsdjo3

use the directory path to get the pid from the pid file:

cat /tmp/user/1000/testo9vsdjo3/node1/regtest/dashd.pid
gdb /home/example/dashd <pid>

Note: gdb attach step may require ptrace_scope to be modified, or sudo preceding the gdb. See this link for considerations: https://www.kernel.org/doc/Documentation/security/Yama.txt

Util tests

Util tests can be run locally by running test/util/bitcoin-util-test.py. Use the -v option for verbose output.

Lint tests

Dependencies

The lint tests require codespell and flake8. To install: pip3 install codespell flake8.

Running the tests

Individual tests can be run by directly calling the test script, e.g.:

test/lint/lint-filenames.sh

You can run all the shell-based lint tests by running:

test/lint/lint-all.sh

Writing functional tests

You are encouraged to write functional tests for new or existing features. Further information about the functional test framework and individual tests is found in test/functional.